modular terminal blocks - cesco.comfixed bridge, 10-pos., breakable insertion bridge, 10-pos.,...

These Micro-Terminal blocks feature compact construction (4.2mm wide), are bridge-able in the center, have matching ground blocks and mount on NS 15 rails. MT1.5 9notshown) is a 2 conductor block (1-input, 1-output), MT1.5-TWIN has 1-input, 2 outputsand MT 15 QUATTRO provides 2-inputs and 2 outputs. MTTB1.5 (not shown) is a dou-ble level block with two independently bridgeable thru levels. It features universalmounting for both NS 15 and NS35 rails. Color: gray (blue available); ground blocksare yellow/green. Connections: clamping screws Flammability Rating: UL94VO.Approvals: UL recognized, CSA certified. Accessories sold separately. Note: groundblocks include white labels w/ground symbols.

Modular Terminal BlocksMicro Terminal Blocks

MT-TWAIN and MT-TWIN-PE

Mfr’s Type Order No. Description AWG

MT 1.5MT 1.5-TWINMT 1.5-QUATTROMTTB 1.5MT 1.5-PEMT 1.5 TWIN-PEMT 1.5-QUATTRO-PE

26-16

3100305300168230016791414129310031830017053001695

00.00

Accessories for Micro Terminal / Blocks

MT-QUATTRO and MT-QUATTRO-PE

Micro Term. Block, 2-Conductor, GrayMicro Term. Block, 3-Conductor, GrayMicro Term. Block, 4-Conductor, GrayDbl.Lvl. Micro-Term. 4-Conductor, GrayMicro Ground Term. Block for MT 1.5Micro Ground Term. Block for MT 1.5-TWINMicro Ground Term. Block for MT 1.5-QUATTRO

Rating

400400400400.........

17.517.5

1617.5.........

V A W L

4.2

22283.5442228

33.5

Dimensions (mm)EachH (NS 35: 7.5/NS 15)

-/23.5-/30-/30

41/41-23.5-/30-/30

Mfr’s Type Order No. Description *

D-MT 1.5D-MT 1.5-TWIND-MT 1.5QUATTROD-MTTB 1.5FBRN 10-4NDG-MTTB 1.5DP-MTTP 1.5ZBFM 4

3100321300297930029823002665300162430026783002681

...

End Cover, Gray, 1mm wide

Fixed Bridge, 10 pos., BreakableSpacer Cover, Gray, 2mm ThickSpacer Plate, Gray, 2mm ThickMarker Strip (order data, see “ Accessories for Terminal Blocks”)

For Terminal Blocks

MT 1.5MT 1.5-TWINMT 1.5QUATTROMTTB 1.5MT 1.5, MT 1.5-TWIN, MT 1.5QUATTRO, MTTB 1.5MTTB 1.5MTTB 1.5Fits all Terminal Blocks above

00.00

Each

* Spacer cover and plate compensate for level offset if standard terminal blocks are to be aligned.

Mini Terminal Blocks

These Mini-Terminal blocks range in width from 5.2mm to 8.2mm and arebridgeable for simple and reliable power distribution. They mount on NS 15DIN rails except MBKKB 2.5 which features universal mounting for both NS15 and NS 35 DIN Rails. MBK3/E-Z and MBK6/E are single level blocks with1-input and 1 output. Type MBK5/E is also single level (without label groove)and snap-fits on to the mounting rail. Type MBKKB2.5 is a double level withtwo bridgeable inputs and outputs. Color: gray, but all except MBK6/E areavailable with blue housing. Flammability Rating: UL94V2. Connections:Screw Clamps. Approvals: UL Recognizable, CSA Certified.


MBK 3/E-ZMBK 6/EMBK 5/EMBKKB 2.5

24-1220-824-1224-12

1413036055202414150761413052

00.00Mini Terminal Block, 2-Conductor, GrayMini Terminal Block, 2-Conductor, GrayMini Terminal Block, Snap Mnt., 2-Cond.,GrayMini Terminal Block, Dbl. Lvl., 4-Cond., Gray

Rating

500500500500

32573224

V A W L5.28.26.25.2

28352862

Dimensions (mm)Each

H (NS 35:7.5/NS 35:15NS/15)-/-/32-/-/36-/-/32

47.5/48/55.5

Accessories for Mini Terminal Blocks


D-MBK/ED-MBK 6/ED-MBKKB 2.5FBRI 10-5NFBI 10-8FBI 10-6FBRNI 10-5NEBL 10-5EB 10-8EB 10-6EB 10-5DP-MBKKB 2.5ZB5ZB8

141502114130491413052277064202032630203250277063923031320202138020113914011321413065

...

...

End Cover, Gray

For Terminal Blocks

00.00

Each

Spacer plate compensates for level offset if standard blocks are to be aligned.

Fixed Bridge, 10-Pos., Breakable

Insertion Bridge, 10-Pos., Breakable

Spacer plate, Gray, 2.5mm ThickMarker Strip (Order data, See “Accessoriesfor terminal Blocks”.)

1mm wide1.5mm wide2.5mm wide

MBK 3/E-Z, MBK 5/EMBK 6/EMBLKB2.5MBK 3/E-ZMBK 6/EMBK 5/EMBKKB 2.5MBK 3/E-ZMBK 6/EMBK 5/EMBKKB 2.5MBKK8 2.5MBK 3/E-Z, MBKKB 2.5MBK 6/E

MBK 3/E-Z MBK 6/E MBK 5/E MBKKB 2.5

4.25.25.26.28.2

10.212.215.2

20253136

50080080

800800800800

1000

1000100010001000

Universal terminal blocks for many applications can be wired fast and reliably, can be bridged and can be labeled on both sides. these blocks have a universal basewhich snaps into NS 32 and NS 35 ( or ) mounting rails. UKH series high current terminal blocks are enclosed and require no end covers. Color: Gray(Blue available). Connections: Screw Clamps. Flammability Rating: UL94VO (UL94V2 for UK 2.5N, UK 3N, UK 16N). Approvals: UL Recognized, CSA Certified.European approvals available upon request. A full range of accessories are available (Ordered Separately).

Modular Terminal BlocksUniversal Terminal Blocks


UK 1.5NUK2.5NUK 3NUK5NUK 6NUK10NUK16NUK 35

UKH 50UKH 95UKH150UKH240

26-1624-1424-1224-1024-820-612-418-0

6-04-0002-30000-500

30058373003347300150130043623004524300507330060433008012

3009118301001330101103010217

00.00

Accessories for Micro Terminal / Blocks

Universal Terminal Block, Gray

Universal High Current Terminal Block, Gray

Rating

17.52432415776

101150

150232309415

V A W L42.542.542.542.542.542.542.5

50

70.583

100100

Dimensions (mm)EachH (NS 35: 7.5/NS 15)

42/49.5/4742/49.5/4747/54.5/5247/54.5/5247/54.5/5247/54.5/5254/61.5/5962/69.5/67

.../83.5/81.5

.../97.5/95.5

.../118.5/116.../131.5/129.5


D-UK 2.5D-UK 4/10D-DU 16

FBRI 10-4NFBRI 10-5NFBI 10-6FBI 10-8FBI 10-10FBI 10-12FBI 2-15FBI 3-15FBI 2-20FBI 3-20

EBL 10-5EB 10-6EB 10-8EB 10-10EB 10-12EB 10-15EB 2-25 UKHEB 3-25/UKHEB 2-31/UKHEB 3-31/UKHEB 2-36/UKHEB 3-36/UKH

ZB 4ZB 5ZB 6ZB 8ZB 10

300102230030203006027

3001624277064202032500203263020327602034540201333020127802013460201317

230313202011390202138020313730061370205135020136202013750201388020139102014010201414

...

...

...

...

...

End Cover, Gray

Fixed Bridge, 10-Pos, Breakable

Fixed Bridge

Insertion Bridge, 10-Pos., Breakable

Insertion Bridge, Snap Fitted

Marker Strips(Order data, See “Accessories for TerminalBlocks”)

For Terminal Blocks

UK 1.5N, UK 2.5NUK 3N, UK5N, UK 6N, UK 10NUK 16N

UK 1.5 NUK 2.5, UK 3NUK5NUK 6NUK 10NUK16NUK 35UK 35UKH 50UKH 50

UK 2.5N, UK 3NUK 5NUK 6NUK 10UK 16NUK 35UKH 95UKH 95UKH 150UKH 150UKH 240UKH 240

UKH1.5NUK 2.5N, UK 3NUK 5NUK 6NUK 10, UK 16N, UK 35, UKH 50, UKH 95, UKH 150, UKH 240

00.00

Each

Accessories Table

The accessories below are the most common. A wider range f accessories can be found on the page entitled “Accessories for Terminal Blocks” which follows thissection. Fixed Bridge: a 10-position breakable screw strip w/insulated collars for voltage bridging in the Terminal center. Insertion Bridge: a 2,3 or 10-position fullyinsulated, breakable strip for voltage bridging at the connection points. Notes: All bridges have a load capacity of at least 70% of nominal current. Marker Strips:Snap-in Labels (Several variations).

1.5mm wide1.8mm wide1.5mm wide

2-Pos.3-Pos.2-Pos.3-Pos.

2-Pos.3-Pos.2-Pos.3-Pos.2-Pos.3-Pos.

UK 1.5N

UK 16N UK 35N

UK 2.5N UK 3N

UKH 50 UKH 95

UK 6NUK 5N

UKH 150 UKH240

UK 10N

4.25.25.26.28.2

10.212.215.2

2025

...

...

...

...

...

...

...

...

...

...

These Terminal blocks use the mounting rails as aground (PE) busbar which makes it possible to posi-tion directly next to the conductor terminal blocks.Designed with a universal base which adapts to bothNS 32 and NS 35 ( or ) mounting rails.Included with each block are white labels printedw/ground symbols. Colors: Green/Yellow.Connections: Screw clamps. Flammability Rating:UL 94VO (UL94V2 for US LKG 50 and USLKG 95).Approvals: shown above. European approvals avail-able. Accessories: ZB Series marker strips (order data, see “Accessories for Terminal Blocks).

Modular Terminal BlocksUniversal Ground Terminal Blocks


USLKG 1.5NUSLKG 2.5NUSLKG 3USLKG 5USLKG 6NUSLKG 10NUSLKG 16USLKG 35USLKG 50USLKG 95

26-1624-2124-1224-1224-820-612-418-06-0

4-000

3005853044111904410830441504044207930039230443023044401904430490441041

00.00

Universal Ground Terminal Blocks

*Current carrying capacity is determined by type of rail.

Rating

...

...

...

...

...76101150150232

V A* W L42.542.542.542.542.542.542.5

5070.5

83

Dimensions (mm)EachH (NS 35: 7.5/NS 35:15/NS 32)

42/49.5/4742/49.5/4747/54.5/5247/54.5/5247/54.5/5247/54.5/5254/61.5/5962/69.5/67-/83.5/81.5-/99/95.5

UNIVERSAL DOUBLE LEVEL TERMINAL BLOCKSThe UKK Double level Terminal blocks are avail-able in two versions. the UKKB Types havebridge shafts in both levels and the UKK typescan only be bridged in the upper level. type UKK5-PE ground Terminal block is available for con-necting ground conductors. These blocks havea universal base which which adapts to both NS32 and NS 35 mounting rails. Color: Gray (blueavailable). Ground (PE) block is green/yellow.Connections: Screw clamps. FlammabilityRating: UL94V0 (UL94V2 for UKK 5-PE).Approvals: UL recognized, CSA Certified.

European approvals available upon request. A full range of accessories are available (Order separately).

Accessories for Micro Terminal / BlocksMfr’s Type Order No. Description *

D-UKK 3/5D-UKKB 3/5DG-UKK 3/5DG-UKK 3/5DP-UKK 3/5DP-UKKB 3/5FBRNI 10-5NFBI 10-6EBL 10-5EB 10-6ZB 5ZB 6

2770024277102327708172770273277079427708042770639020325003031320201139

...

...

End Cover, gray, 2.5mm wideEnd Cover, gray, 2.5mm wideSpacer Cover, gray, 2.5mm thickSpacer Cover, gray, 2.5mm thickSpacer Plate, gray, 2..5mm thickSpacer Plate, gray, 2..5mm thickFixed Bridge, 10-pos., breakableFixed Bridge, 10-pos., breakableInsertion Bridge, 10-pos., BreakableInsertion Bridge, 10-pos., Breakable

Marker Strips(Order, see “Acces. for Term. Blocks”)

For Terminal Blocks

UKK 3, UKK 5UKKB 3, UKKB 5UKK 3, UKK 5UKKB 3, UKKB5UKK 3, UKK5UKKB 3, UKKB5UKK 3, UKKB 3UKK 5, UKKB 5UKK 3, UKKB 3UK 5, UKKB 5UKK 3, UKKB3UK5, UKKB 5, UKK 5-PE

00.00

Each

USLKG 1.5N USLKG 2.5N USLKG 3

USLKG 16N USLKG 35

USLKG 6NUSLKG 5

USLKG 50 USLKG 95

USLKG10N

5.25.26.26.26.2

500500500500...


UKK 3UKKB 3UKK 5UKKB 5UKK 5-PE

24-12

27700112771010277401727711462774211

00.00Universal Double Level Terminal Block

Universal Double Level Ground Term Block

Rating

32323232...

V A* W L5667566756

Dimensions (mm)EachH (NS 35: 7.5/NS 35:15/NS 32)

62/69.5/67

The accessories below are the two most common. A wider range of accessories are available (See“Accessories for Terminal Blocks”). Space covers and plates compensate for level offset if standardTerminal blocks are aligned.

Accessory Table

FIG

1122334455......

UKK 3 UKKB 3 UKK 5 UKKB 5 UKK 5-PE

1 2 3 4 5

6.2

250250250250250400*400400*

The DIK 1.5 3-level sensor input block distributes a signal line (top level) as well as - and + potentials (middle and bottom levels) via insertion bridges. DIKD 1.5 isthe same, except with 3 feed -through contacts. DOK 1.5 is a 3-level actuator output block which accommodates a signal line (top level) a bridged negative poten-tial (middle level) and a grounding busbar (bottom level). VIOK 1.5 is a 4-level combination of the DIK/DOK blocks where only one block is needed for sensors andactuators. This block distributes a signal line (top level), - and + supplies (middle levels) and grounding busbar (bottom level). VIOK 1.2-2D has a 2 feed-throughand 2 busbar levels. VIOK 1.5-3D/PE is a 4-conductor feed-through block. The 3-conductor DLK 2.5-PE and DLKB 2.5-PE blocks are designed for 3-phase cur-rent. The DLKB is bridgeable via insertion bridges (bottom and middle levels) and fixed bridges (top level). Color: gray. Connections: screws. Flammability rat-ing: UL94V2 (UL94V0 for DLK/DLKB blocks) Approvals: UL recognized CSA certified. Call for European approvals. Mounting : for NS 35 ( ) rails only. Afull range of accessories are available.

Modular Terminal Blocks3 and 4-level Terminal Blocks


DIK 1.5DIKD 1.5DOK 1.5VIOK 1.5VIOK 1.5-2DVIOK 1.5-3D/PEDLK 2.5-PEDLKB 2.5-PE

24-12

27159662715979271701627180152718196271820630110413011038

00.008-lvl Sensor terminal blockas above, but w/3 through contacts3-lvl. Actuator terminal block4-lvl. Sensor/Actuator term. Blockas above, but w/2 thru & 2 busbar levelsas above but w/4 feed thru levels4-lvl., 3- conductor terminal blocksas above, but bridgeable one side

Rating

2624262626262626

V A* W L55

72.561.562.5

7382.5

8383.5

Dimensions (mm)EachH (NS 35:7.5/NS 35:15)

54.5/6254.5/6254.5/6270/77.570/77.570/77.570/77.570/77.5

Accessory Table for 3 and 4-Level Terminal Blocks

The UK... Twin Terminal blocks solve the problem of “power distribution.” They have two indepen-dent conductor connections on the load side, while on the input side they are the same shape asfeed-thru universal terminal blocks UK 3N and UK 5N. The UDK versions feature power distributionusing 2 terminal points on each connection side, as well as two bridging points in the terminal cen-ter. Both versions include ground terminal blocks in green-yellow closed housings. Color: gray(blue available). Connections: screws. Flammability Rating: UL94V2. Mounting: Universal.Approvals: Call.

Accessories for Micro Terminal / BlocksMfr’s Type Order No. Description

FBI 10-6EB 80-DIK BUEB 80-DIK RDEB 10-DIK GYEB 10-DIK RDEB 10-DIK BUZB 6

020325027159402715953271593727167742716680

...

Fixed Bridge, 10-pos., breakableInsertion Bridge, 80-pos., breakable, blue, Insertion Bridge, 80-pos., breakable, redInsertion Bridge, 10-pos., breakable, gray Insertion Bridge, 10-pos., breakable, red Insertion Bridge, 10-pos., breakable, blueMarker strips (order data, see “Accessories for TerminalBlocks”)

For Terminal Blocks

Fits all of the Term. Blocks aboveFits all except DLK 2.5 PEFits all except DLK 2.5 PEFits all except DIK 1.5, DIKD 1.5, DLK 2.5-PEFits all except DIK 1.5, DIKD 1.5, DLK 2.5-PEFits all except DIK 1.5, DIKD 1.5, DLK 2.5-PEFits all of the Term. Blocks above

00.00

Each

DIK 1.5 DOK 1.5 VIOK 1.5 VIOK 1.5-3D/PEVIOK 1.5-2D DLK 2.5-PE

Twin Conductor Terminal BlockUK...TWIN

Double Terminal Blocks UDK

*If EB insertion bridge is used, the nominal voltage is reduced to 250V.

Special Terminal Blocks/Special Connections

5.26.25.26.25.26.26.2

400500......

500690...


UK 3-TWINUK 5-TWINUK 3-TWIN-PEUK 5-TWIN-PEUDK 3UDK 4UDK 4-PE

24-1424-1224-1424-1224-1224-1224-12

3002225192302119231281923076277537527750162775184

00.00Twin Conductor Term BlockTwin Conductor Term BlockTwin Conductor Ground Term BlockTwin Conductor Ground Term BlockDouble Term BlockDouble Term BlockDouble Ground Term Block

Rating

2432......3232...

V A W L50.550.550.550.563.563.563.5

Dimensions (mm)EachH (NS 35:7.5/NS35:15/NS 32

7/54.5/52.5

Note: Ground Blocks include white labels with ground symbols.

Accessory Table for 3 and 4-Level Terminal BlocksAccessories for Micro Terminal / BlocksMfr’s Type Order No. Description

D-UK 5-TWIND-UDK 4FBRI 10-5NFBI 10-6EBL 10-5EB 10-6ZB 5ZB 6

192303427751132770642020325023031320201139

...

...

End Cover, Gray, 2mm wideEnd Cover, Gray, 1.5mm wideFixed Bridge, 10-pos., breakableFixed Bridge, 10-pos., breakableInsertion Bridge, 10-pos., breakableInsertion Bridge, 10-pos., breakableMarker strip (order data, see “Accessories for TerminalBlocks”)

For Terminal Blocks

UK 3-TWIN, UK 5-TWINUDK 3, UDK 4UK 3-TWIN, UDK 3UK 5-TWIN, UDK 4UK 3-TWIN, UDK 3UK 5-TWIN, UDK 4UK 3-TWIN, UK3-TWIN-PE, UDK 3UK 5-TWIN, UK5-TWIN-PE, UDK 4, UDK 4-PE

00.00

Each

6.26.26.26.2

500500690

400*

These fuse or component terminal blocks arebase terminal blocks which accept the fuse orcomponent plugs listed below. Because thesebase blocks have the same shape and dimen-sions as standard feed-through blocks MBK5,UK5N, UDK4 and UKKB5, they can be combinedwith the standard blocks on one rail to performvarious tasks. Color: Gray. Connections:Screw clamps. Flammability Rating: UL94V2.European approvals available. Accessories soldseparately.

Modular Terminal BlocksTerminal Blocks for Fuse and Component Plugs


MBK 5/E-TGUK 4-TGUDK 4-TGUKK 5-TG

24-1224-1224-1224-12

1415089281201827770143007042

00.00Base Terminal Block, Gray

Rating

16161616*

V✝ A* W L28

42.563.5

80

Dimensions (mm)EachH(NS35:7.5/NS35:15/NS 32/NS15)

-/-/-/3647/54.5/52/-47/54.5/52/-68.5/76/73/-

MBK5/E UK 4-TG UDK 4-TG UKK 5-TG

300300300

------

Mfr’s Type Order No. Description

ST-SI-UK 4ST-SILED 24-UK 4ST-SILA 250-UK 4ST-BEST-BE-LA 24ST-BE-LA 230ST-1N4007ST-BE-VIERPOLST-B250 C 1500

092101109210370921053280231628023742802387280232928023322802345

00.00Fuse plug for 5x20 mm fuses, 26.5mm high, color: blackAs above, except with 24v light indicator (15-30 v AC/DC)As above, except with 250v light indicator (110-250v AC/DC)Single component plug (for 2-position components), 19mm high, grayAs above, except with 24V DC LEDAs above, except with 230v AC/DC LEDAs above, except with universal diode 1N4007Double component plug (for 4 position components), 19mm high, grayAs above, except with bridge rectifier B 250 C 1500

Rating

6.3*6.3*6.3*

------

V AEach

Accessory Table

✝ Current & Voltage determined by component & fuse plugs *Upper level (lower level 400v, 26A) ** For std block UK 5N


D-MBK 5/E-TP-UK 4/10D-UDK RELGFBI 10-6EB 10-6ZB 6

1413706300302027702702032500201139

End Cover, Gray

Fixed Bridge, 10-pos., breakableInsertion Bridge, 10-pos., breakableMarker Strip (order data, see "Accessories forTerminal blocks")

For Terminal Blocks

MBK 5/E-TGUK 4-TGUDK 4-TGUKK 5-TGFits all 4 base blocksUK 4-TG, UDK 4-TG, UKK 5-TG

00.00

Each

1mm wide1.8mm wide1.5mm wide

Fused and Component Plugs

ST-SI-UK 4 ST-BE

Several plug versions are available for use with the base terminal blocksdescribed above. The ST-SI-UK 4 fuse plugs accommodate 5x20 man fuse car-tridges, and are available with or without a light indicator. The plug housingopens on one side to change the fuse. The ST-BE component plugs are avail-able as single plugs for 2-position components and as double plugs for 4-posi-tion components with or without inserted components. The component itself isinserted and clamped at the top. The open design means that larger compo-nents can be used that protrude above the plug. All fuse and component plugsare coded to avoid polarity reversal. Color: Fuse plugs (black), componentplugs (gray). Flammability Rating: fuse plugs (UL94V2), Component plugs(UL94V0).

*UL (CSA 10A)

Component Terminal Block

This terminal block with integrated diode 1N4007 (conducting direction from top tobottom) is an alternative to using component plugs. It is the same size and shapeas universal double level block UKK 5. Color: gray. Connections: screw clamps.Flammability Rating: UL94V2. Mounting: Universal. Diode Reverse Voltage:1300 V; 1A max continuous current.

6.2500


UKK 5-DIO/O-U 24-122791016 00.00Term Block w/1N 4007 Diode, Gray

Rating

32V✝ A W L

56

Dimensions (mm)EachH(NS35:7.5/NS35:15/NS 32

62/69.5/67

Accessories


D-UKK 3/5DG-UKK 3/5DD-UKK 3/5ZB 6

277002427708172770794

...

00.00End cover, gray, 2.5 mm wideSpacer Cover, compensates for level offset if standard blocks are to be alignedSpacer plate, compensates for level offset if standard blocks are to be aligned, 2.5mm Th.Marker strip (order data, see "Accessories for terminal blocks")

Each

with diode from top to bottom

8.26.2

500400

These slide link Test disconnect blocks are used extensively in the utilities industry, Each URTK/S-BENblock has a sliding link which enables the end user to employ a disconnect at the full rated value of theterminal. the connection screws have a socket cavity to accommodate 4mm Test plugs and 2 and 4-posi-tion short circuit plugs. the smaller URTL/SS block has the same features, but the connection screws arerecessed with on opening which allows plugs to be inserted directly. Color: gray. mounting: Universal forplugs on either NS35 or NS 32 DIN rails. Flammability rating: URTK/S-BEN (UL94V0), URTK/SS(UL94V2).

Modular Terminal BlocksSide Link Disconnect Terminal Blocks


URTK/S-BENURTK/SS

20-824-12

03090860321019

00.00Slide Link Disconnect term. Block

Rating

5726

V✝ A* W L61

56.5

Dimensions (mm)EachH(NS35:7.5/NS35:15/NS 32)

58.5/66/63.540/47.5/45

URTL/S-BEN URTK/SS

Accessories


D-UTK/S-BEND-URTK/SSFBRNI 10-6 NEB 10-8SKSS-8KSS 4-8KSS-6KSS 3-6ZB6ZB8

030802903210222770626020213803083590311540030954903015470309523......

End Cover, Gray, 2.2mm wideEnd Cover, Gray, 1mm wideFixed Bridge, 10-Pos., BreakableInsertion Bridge, 10-Pos., BreakableSwitch lock (prevents operation of slide link)

2-pos.Short Circuit Plug 4-pos.

2-pos.3-pos.

Marker Strip (order data, see “Accessories for termi-nal Blocks”)

For Terminal Blocks

URTK/S-BENURTK/SSURTK/SSURTK/S-BENURTK/S-BENURTK/S-BENURTK/S-BENURTK/SSURTK/SSURTK/SSURTK/S-BEN

00.00

Each

KNIFE DISCONNECT TERMINAL BLOCKS

UK 5-MTK-P/P

Knife disconnect blocks permit rapid fault isolationand insertion under zero volt conditions. They fea-ture space saving construction and high current car-rying capacity. P/P types have test Socket Screws(to accommodate 4mm test Plugs) in lieu of standardscrew connections. UDK4-MTK-P/P has doubleconnection points to accommodate several wires oneach module. Color: Gray (knife disconnectsorange). Flammability Rating: UL92V2. Mounting:Universal. Approvals: UL Recognized, CSACertified.

Accessories


D-MTKD-UDK4FBI 10-6EBL 10-5EB 10-6ATS-MTKATP-UK 5-MTKZB 5ZB 6

3101029277511302032502003132020113931012233004210

.....

00.00End Cover, Gray 1mm wideEnd Cover, Gray, 1.5mm wideFixed Bridge, 10Pos., BreakableInsertion Bridge, 10-Pos., BreakableInsertion Bridge, 10-Pos., BreakablePartition Plate, for electrical separation of Terminal GroupsPartition Plate, for electrical separation of Terminal GroupsMarker Strips (order data, see “Accessories for Terminal Blocks

Each

MTK-P/P UDK 4-MTK-P/P UKK 5-MTK-P/P

5.25.25.25.26.26.36.26.2

400400400400800690400400


MTK-P/PMTKMTKD-P/PMTKDUK 5-MTK-P/PUDK 4-MTK-P/PUKK 5-MTK-P/PUKK 5-MTKD-P/P

24-12

3104013310101631000203100017300403227752102800042800017

00.00Knife Disconnect Term.Block w/socket screwsAs above, except w/standard screwsFeed-thru Block (w/o knife), w/socket screwsAs above, except w/standard screwsKnife Disconnect Term. Block w/socket screwsAs above, w/double connections pointsDbl. Lvl, knife Disconnect upper Lvl. socket screwsDbl. Lvl. Feed-thru (w/o knife), w/socket screws

Rating

161616161616

12*12*

V A W L4646464651

63.58080

Dimensions (mm)EachH (NS35:7.5/NS35:15/NS 32)

51.5/59/5651.5/59/5651.5/59/5651.5/59/56

58.5/66/63.547/54.5/5268/76/7368/76/73

For Terminal Blocks

MTK-P/P, MTK, MTKD-P/P, MTKDUDK 4-MTK-P/PUKK 5-MTK-P/P, UKK 5-MTKD-P/PMTK-P, MTK, MTKD-P/P, MTKDUK 5-MTK-P/P, UDK 4-MTK-P/PMTK-P/P, MTK, MTKD-P/P, MTKDUK 5-MTK-P/PMTK-P/P, MTK, MTKD-P/P, MTKDUK 5-MTK-P/P, UDK 4-MTK-P/P, UKK 5-MTK-P/PUKK 5-MTKD-P/P

* Upper level (lower level 26A) NOTE: Types UK5... and UKK5... have enclosed houses

22

33

500

750*

These compact direct mounted terminal blocks are used primarily with network connections forelectrical and electronic equipment and small terminal boxes. G5 blocks accommodate wires up to12 AWG and G10 blocks are for wires up to 8 AWG (stranded) and 6 AWG (solid). The housing ismade of shock proof UL94V2 impact resistant plastic. The blocks interlock and are supplied withtwo screws each for mounting. Connection points can be labeled with optional marker pins whichinsert into notches in the top of each block. Color: Gray.

CLIPLINE Modular Terminal BlocksEquipment Terminal Blocks

M f r. ’s Ty p e Order No. D e s c r i p t i o nAW G

G 5/2G 5/3G 5/4G 5/6G 5/12G 10/2G10/3G10/4G 10/5

24-12

20-6

271602027160332716046271606227161272716703271671627167292716732

1.842.633.354.779.044.897.359.80

12.24

Equipment Term. Block

Equipment Term. Block

R a t i n g

32

76

V A203138529229465768

Dimensions (mm)E a c hH

24

31

G 5/...

Accessories

Accessories for Micro Terminal / BlocksM f r. ’s Ty p e Order No. D e s c r i p t i o n

BN WHBNB WH:...*BN-AS WHWS-G 5/2WS-G 5/3WS-G 5/4B-STIFT

1401404140141714014202720029272003227164991051993

Marker pin, unprinted for labeling with a marker pen, white, area 4x4 mmAs above, except printed with 1, 2, or 3 characters, white, area 4x4 mmGroup cover marker, unprinted, white, area: 4x20.5 mm

Warning plate, completely covers terminal surface

Marker pen for labeling unprinted markers. Smear-proof and waterproof.

0.080.020.180.320.350.36call

E a c h

1/N/PE Connecting Terminal Blocks

*DIN VDE 0606(800V IEC 947-7-1)

2-pos.3-pos.4-pos.6-pos.12-pos.2-pos.3-pos.4-pos.5-pos.

LW

Marker pins are available either in white/unprinted for labeling with a marker pen or white/printed with 1, 2 or 3 characters (must specify characters when ordering).

For G 5/2For G 5/3For G 5/4

*Specify marking when ordering.

Neutral (N), ground (PE) or phase conductors (L) are often connected to central busbars and require clear marking of the terminalblocks to the corresponding circuit. The AKG connecting terminal blocks fulfill this requirement with their blue, green-yellow or blackhousings. They fit onto 3x10 mm busbars with a captive pressure plate and non-loosening screws. Three supports made of insulat-ing material are available to hold the busbars: a single bar support and two offset double bar supports (one 48mm high, the other only36.8 mm high). Flammability Rating: UL94V2. Approvals: ULRecognized, CSACertified (AKG 16 only).

7

10

41

76


AK 4AKG 4BUAKG 4 CNYEAKG 4 BKAK 16AKG 16 BUAKG 16 GNYEAKG 16 BK

20-10

16-6

04040170421016042102904210320404033042301404230270423030

0.460.630.630.630.680.920.920.92

L/N/PE Connecting term block w/o insulating capAs above, except w/ blue insulating cap (for N)As above, except w/ green-yellow insulating cap (for PE)As above, except w/ black insulating cap (for L1,L2,L3)L/N/PE connecting term block w/o insulating capAs above, except w/ blue insulating cap (for N)As above, except w/ green-yellow insulating cap (for PE)As above, except w/black insulating cap (for L1,L2,L3)

A

23.5

23.5

Dimensions (mm)E a c hH*

35.5

44.5

Accessories

Accessories for Micro Terminal / BlocksM f r. ’s Ty p e Order No. D e s c r i p t i o n

NLS-CU 3/10AB/SSAB 2/SSABN 2/SSZB 6ZB 8

0402174040442804044310404460

...

...

Neutral Busbar, 3x10 mm, length: 1m, copper tin-plated, 140 A max.Support, single bar, insulated, w/retaining screw, for 3x10 mm or 6x6 mm busbarsSupport, offset double bar, insulated, for 3x10 mm or 6x6 mm busbars, 48 mm highSupport, offset double bar, insulated, for 3x10 mm or 6x6 mm busbars, 36.8 mm highMarker strip for AK 4 series (order data, see “Accessories for Terminal Blocks”).Marker strip for AK 16 Series (order data, see “Accessories for Terminal Blocks”)

11.451.031.691.690.910.91

E a c h

* Height above mounting surface.

LW

G10/...

CLIPLINE Spring Cage Terminal Blocks

A complementary option to screw terminal block technology is spring cage tech-nology where a spring pulls the conductor tight against the current bar. The pre-stressed corrosion-proof copper alloy spring is opened using a screwdriver sothe conductor can be inserted into the insertion space through an opening in thespring leg. The conductor is pulled against the current bar under spring forcewhen the screwdriver is removed.

ST SeriesPhoenix Contact announces the introduction of a new high density spring cage terminal block family (ST). The new “mini spring” design reduces the overall size ofthe terminal block without giving up any features. The STproduct has a flexible dual channel push-in jumper system, which can handle and chain bridging using 2,3, 4, 5, 10 or 20 position jumpers. There is a generous wire entrance which eliminates the need to use a larger termial block when ferrules are used. The ST blockhas large center marking for easy access and readability and end marking for labeling each termination point. The housings are made of unbreakable polyamide6.6. Color: gray (-PE models green-yellow), Connections: spring cage. Flammability Rating: UL94V0. Mounting: EN50022 (NS35) rails.

Spring Cage Feed Through Terminal Blocks

4.24.25.25.26.26.28.28.2

300...

600...

600...

600...

M f r. ’s Ty p e Order No. D e s c r i p t i o n AW G

ST 1.5ST 1.5-PEST 2.5ST 2.5-PEST 4ST 4-PEST 6ST 6-PE

26-1426-1426-1226-1224-1024-1020-820-8

30310763031513303121230312383031364303138030314873031500

0.862.870.953.401.123.421.674.28

Spring cage feed-through terminal, graySpring cage ground terminal block, gn/yeSpring cage feed-through terminal, graySpring cage ground terminal block, gn/yeSpring cage feed-through terminal, graySpring cage ground terminal block, gn/yeSpring cage feed-through terminal, graySpring cage ground terminal block, gn/ye

R a t i n g

15...20...30...50...

V A W L48.548.548.548.55656

65.565.5

Dimensions (mm)E a c h

H (NS35:7.5/NS35:15)36.5/4436.5/4436.5/4436.5/4436.5/4436.5/4443.5/5143.5/51

Multi-Conductor Spring Cage Terminals Blocks

4.24.25.25.26.26.24.24.25.25.26.26.2

300...

600...

600...

300...

600...

600...


ST 1.5-TwinST 1.5-Twin-PEST 2.5-TwinST 2.5-Twin-PEST 4-TwinST 4-Twin-PEST 1.5-QuattroST 1.5-Quattro-PEST 2.5-QuattroST 2.5-Quattro-PEST 4-QuattroST 4-Quattro-PE

26-1426-1426-1226-1224-1024-1026-1426-1426-1226-1224-1024-10

303112830311443031241303126730313933031416303118630312093031306303132230314453031461

0.933.581.103.871.174.031.093.801.585.031.965.09

Three-conductor spring cage feed through terminal, grayThree-conductor spring cage ground terminal block, gn/yeThree-conductor spring cage feed through terminal, grayThree-conductor spring cage ground terminal block, gn/yeThree-conductor spring cage feed through terminal, grayThree-conductor spring cage ground terminal block, gn/yeFour-conductor spring cage feed through terminal, grayFour-conductor spring cage ground terminal block, gn/yeFour-conductor spring cage feed through terminal, grayFour-conductor spring cage ground terminal block, gn/yeFour-conductor spring cage feed through terminal, grayFour-conductor spring cage ground terminal block, gn/ye

R a t i n g

15...20...30...15...20...30...

V A W L60.560.560.560.571.571.5727272728787


H (NS35:7.5/NS35:15)36.5/4436.5/4436.5/4436.5/4436.5/4436.5/4436.5/4436.5/4436.5/4436.5/4436.5/4436.5/44

Double Level Spring Cage Terminals Blocks

4.25.26.25.2

300600600600


STTB 1.5STTB 2.5STTB 4MZFFKB 1.5

26-1426-1224-1026-14

3031157303127030314293005714

1.472.242.362.71

Double level spring cage feed through terminal, grayDouble level spring cage feed through terminal, grayDouble level spring cage feed through terminal, grayMini double level spring cage feed through terminal, gray

R a t i n g

15203015

V A W L67.567.583.585

Dimensions (mm) E a c hH (NS35:7.5/NS35:15)

47.5/5547.5/5547.5/5542/42.5

Accessories for ST Series Spring Cage Terminal Blocks are on the next page

Feed-through terminalblocks ST

Multi-conductor springcage terminal blocks

Spring cage double levelterminal blocks

CLIPLINE Spring Cage Terminal Blocks

Accessories for ST Series Spring Cage Terminal Blocks(ST Series terminal blocks are on the previous page)

M f r. ’s Ty p e Order No. D e s c r i p t i o n

D-ST 2.5D-ST 4D-ST 6D-ST 2.5-TwinD-ST 4-TwinD-ST 2.5-QuattroD-ST 4-QuattroD-STTB 2.5D-STTB 4FBS 2-4FBS 3-4FBS 4-4FBS 5-4FBS 10-4FBS 20-4FBS 2-5FBS 3-5FBS 4-5FBS 5-5FBS 10-5FBS 20-5FBS 2-6FBS 3-6FBS 4-6FBS 5-6FBS 10-6FBS 20-6FBS 2-8FBS 3-8FBS 4-8FBS 5-8FBS 10-8ATP-ST 4ATP4-TwinATP4-QuattroATP-STTB 4ZBFM 4ZBFM 5ZBFM 6ZBFM 8ZB 4ZB 5ZB 6

303041730304203030433303048830304913030514303052730304593030462303011630301293030132303014530301583030352303016130301743030187303019030302133030226303033630302423030255303034930302713030365303028430302973030307303031030303233030721303078930308153030747

********

End cover gray, 2mm wideEnd cover gray, 2mm wideEnd cover gray, 2mm wideEnd cover gray, 2mm wideEnd cover gray, 2mm wideEnd cover gray, 2mm wideEnd cover gray, 2mm wideEnd cover gray, 2mm wideEnd cover gray, 2mm widePlug-in bridge 2 positionPlug-in bridge 3 positionPlug-in bridge 4 positionPlug-in bridge 5 positionPlug-in bridge 10 positionPlug-in bridge 20 positionPlug-in bridge 2 positionPlug-in bridge 3 positionPlug-in bridge 4 positionPlug-in bridge 5 positionPlug-in bridge 10 positionPlug-in bridge 20 positionPlug-in bridge 2 positionPlug-in bridge 3 positionPlug-in bridge 4 positionPlug-in bridge 5 positionPlug-in bridge 10 positionPlug-in bridge 20 positionPlug-in bridge 2 positionPlug-in bridge 3 positionPlug-in bridge 4 positionPlug-in bridge 5 positionPlug-in bridge 10 positionPartition plate for seperation of groups 2mm thickPartition plate for seperation of groups 2mm thickPartition plate for seperation of groups 2mm thickPartition plate for seperation of groups 2mm thickMarker sheets, flat for labeling outer groovesMarker sheets, flat for labeling outer groovesMarker sheets, flat for labeling outer groovesMarker sheets, flat for labeling outer groovesMarker strip for center of terminal and plug in bridgesMarker strip for center of terminal and plug in bridgesMarker strip for center of terminal and plug in bridges

For Terminal Blocks

ST2.5ST 4ST 6ST2.5-TwinST 4-TwinST2.5-QuattroST4-QuattroSTTB 2.5STTB 4ST1.5ST1.5ST1.5ST 1.5ST 1.5ST 1.5ST 2.5ST 2.5ST 2.5ST 2.5ST 2.5ST 2.5ST 4ST 4ST 4ST 4ST 4ST 4ST 6ST 6ST 6ST 6ST 6ST 1.5, 2.5, 4, 6ST 1.5, 2.5, 4 TwinST 1.5, 2.5, 4 QuattroST1.5, 2.5, 4 STTBST 1.5 all seriesST 2.5 all seriesST4 all seriesST 6ST 1.5 all seriesST2.5 all seriesST 6

0.460.490.490.470.480.490.490.510.520.400.801.251.553.25Call0.400.801.251.553.256.500.400.801.251.553.256.500.501.051.702.104.250.430.570.610.618.558.558.558.550.910.910.91

E a c hA m p e r a g e

………………………

17.517.517.517.517.517.52424242424243232323232324141414141……………………………

* Order data, see “Accessories for Terminal Blocks”

CLIPLINE Spring Cage Terminal BlocksSpring Cage Knife Disconnect Terminal Blocks

5.25.25.26.26.26.2

400


24-12

20-10

300187330250533025011300579830058083001857

3.624.534.22

13.2713.35

2.17

Knife disconnect terminal block: 1-currentAs above, except with 2-circuitsDbl.level term. blk. W/top disconnectAs above, w/both levels disconnecting1-input, 2-disconnectable outputsBase term.blk for fuse/component plugs

R a t i n g

16*

V A W L71

88.510410788.558.5


H (NS 35:7.5/NS 35:15)37.5/4537.5/4549/56.555/62.555/62.540.5/48

These feed-through knife disconnect terminal blocks with 2.3 mm test plugs permitrapid fault isolation and inspection of work under zero volt conditions. Models ZFK2.5-MT and ZFDK 2.5-MT (not shown) are single level blocks with one and two dis-connectable feed-through circuits respectively. Models ZFKK 2.5-MT (not shown) andZDMTK 2.5 are double level blocks; ZFKK 2.5-MT disconnects only in the top level andZDMTH 2.5-MT on both levels. ZDMTK 2.5-TWIN has one input circuit and two dis-connectable output circuits. Model ZFK 4-TG is a fuse or component base terminalblock which accepts the ST-SI...fuse plugs and ST-BE component plugs shown on aprevious page. Color: gray (orange disconnects). Flammability Rating: UL94V0.Mounting: NS 35 rails.


D-ZFK 2.5-TWIND-ZFKD 2.5-MTD-ZFKK 2.5-MTD-ZFK 4FBRI 10-5NFBSTB 2-5FBSTB 3-5FBSTB 10-5ATP-ZFKKB 4

ZBFM 5ZBFM 6

ZB 5

300280130242163024151300279127706423024643302465630247243005772

...

...

...

End cover, gray, 2 mm wide

Fixed Bridge, 10 Position, BreakablePlug-in bridge for term.center,can be labeled

Partition plate, for separation of terminal blockgroups, 2 mm thickMarker sheets, flat, for labeling outer grooves(order data, see “Accessories for TerminalBlocks”)Marker strips for term. center & plug-in bridges(order data, see “Accessories for TerminalBlocks”)

For Terminal Blocks

ZFK 2.5-MTZFDK 2.5-MTZFKK 2.5-MTZFK 4-TGZFK 2.5-MT, ZFKK 2.5-MTZFK 2.5-MT, ZFKK 2.5-MTZFK 2.5-MT, ZFKK 2.5-MTZFK 2.5-MT, ZFKK 2.5-MTZDMTK 2.5, ZDMTK 2.5-TWIN

ZFK 2.5-MT, ZFDK 2.5-MT, ZFKK 2.5-MTZDMTK 2.5, ZDMTK 2.5-TWIN, ZFK 4-TG

ZFK 2.5-MT, ZFDK 2.5-MT, ZFKK 2.5-MT

0.550.570.590.545.520.621.154.550.55

8.558.55

0.91

E a c h

ZFK 2.5-MTZFDK 2.5-MTZFKK 2.5-MTZDMTK 2.5ZDMTK 2.5-TWINZFK 4-TG

Accessories

1752Benjamin Franklin is the first to define positive and negative electrical charges. Lacking terminology, he invents new words such

as positive, negative, battery, condenser, charge, discharge, electrical shock, electrician, armature, brush and conductor.

ZFK 2.5-MT ZDMTK 2.5-TWIN ZDMTK 2.5 ZFK 4-TGApprovals: (ZFDK 2.5-MT, ZFK 4-TG); (ZFK 2.5-MT)

*ZFKK 2.5-MT upper level 16 A, lower level 26 A

2-pos.3-pos.10-pos

Spring Cage Initiator/Actuator Terminal BlocksThe ZDIK wires 3-conductor initiators on 3-levels. The lower level can be used to connect the + or groundpotentials and the middle level connects the - potential. Once power is fed in, it is distributed in the lowerand middle levels via color-coded plug-in bridges, which can also be labeled. The upper level is used toloop in the signal lines and can be interconnected using a screw bridge (FBRI) or a plug-in bridge(FBSTB). The ZVIOK is a 4-level block. It uses the lower level for grounding, the middle levels for + and- supply, and the upper level for the signal lines. Color: gray. Flammability Rating: UL94V0.Mounting: NS 35 rails.

5.25.2

17.517.5


26-1426-14

30064703006506

3.184.09

3-lvl. Initiator/Actuator term. block4-lvl. Initiator/Actuator term. block

R a t i n g

250250

V A W L73.590


H (NS 35:7.5/NS 35:15)48.5/56.548.5/56.5

ZDIK 1.5ZVIOK 1.5


D-ZDIK 1.5D-ZVIOK 1.5FBRI 10-5NFBST 2-5FBST 3-5FBST 10-5FBSTB 10-ZDIK GYFBSTB 10-ZDIK RDFBSTB 10-ZDIK BUFBSTB 10-ZDIK GNYE

ZBFM 5

ZB 5

3006593300660327706423025066302507930251473006535300655130065483006771

...

...

End cover, gray, 2 mm wideEnd cover, gray, 1 mm wideFixed bridge, 10-pos., breakable

Plug-in bridge for term.center, canbe labeled

Plug-in bridge, color-coded10-pos., can be labeled

Marker sheet, flat, for labeling outer grooves(order data, see “Accessories for TerminalBlocks”)Marker strips for term. center & plug-inbridges (order data, see “Accessories forTerminal Blocks”)

For Terminal Blocks

ZDIK 1.5ZVIOK 1.5ZDIK 1.5, ZVIOK 1.5

ZDIK 1.5, ZVIOK 1.5

ZDIK 1.5, ZVIOK 1.5

ZDIK 1.5, ZVIOK 1.5

ZDIK 1.5, ZVIOK 1.5

0.880.935.500.591.104.351.771.771.771.77

8.55

.91

E a c h

Accessories

2-pos.3-pos.10-pos.

grayredbluegreen-yellow

CLIPLINE Spring Cage Terminal BlocksSpring Cage Fuse Terminal Blocks with Disconnect Lever

8.2

8.2

400

400


20-10

20-10

302545130253673025370302546430253833025396

5.7214.6114.10

6.7516.4915.19

Fuse term. block for 5 x 20 mm fusesAs above, except w/24 V light indicatorAs above, except with 250 V light indicatorFuse term. block for 6.3 x 32 fusesAs above, except w/24 V light indicatorAs above, except w/250 V light indicator

R a t i n g

6.3

6.3

V * A * W L

82

82


H (NS 35:7.5/NS 35:15)

65.5/73

65.5/73

Spring cage fuse terminal blocks from Phoenix Contact satisfy two important basic tasks of connection systems.First, they hold fuses and secondly, they take on the task of power distribution using fixed bridges. Each blockfeatures a hinged disconnect lever for quick and safe fuse exchanges. These terminal blocks are available foreither 5 x 20 or 6.3 x 32 mm fuses, and a light indicator option which glows when the fuse is blown. Color: black.Flammability Rating: UL94V0. Mounting: NS 35 rails.


ZBFM 8 ... Marker sheet, flat, for labeling marker grooves(order data, see “Accessories for TerminalBlocks”)

For Terminal Blocks

Fits all the terminal blocks above 8.55

E a c h

ZFK 4-HESI (5 X 20)ZFK 4-HESILED24 (5 X 20)ZFK 4-HESILA250 (5 X 20)ZFK 4-HESI (6.3 X 32)ZFK 4-HESILED24 (6.3 X 32)ZFK 4-HESIL250 (6.3 X 32)

Accessories

ZFK 4-HESI (5 X 20) ZDK 4-HESI (6.3 X 32)

Accessories For Terminal Blocks

Each ZB marker strip consists of 10 white tear-apart markers which are pushed into the label grooves of the terminal blocks.Three versions are listed below - unprinted (for use with a marking pen) and consecutive numbers labeled horizontally or verti-cally. Other available options include colored markers, decade labeling ( 10, 20, 30 - 100), identical numbers, larger 100 piecesections and custom printing. Call for details on these and other options.

*The current is determined by the fuse; the voltage by the light indicator

Zack (“Quick”) Marking Strips


ZB 4: unprintedZB 4, LGS: 1-10ZB 4, QR: 1-10ZB 5: unprintedZB 5, LGS: 1-10ZB 5, QR: 1-10ZB 6: unprintedZB 6, LGS: 1-10ZB 6, QR: 1-10ZB 8: unprintedZB 8, LGS: 1-10ZB 8, QR: 1-10ZB 10: unprintedZB 10, LGS: 1-10ZB 10, QR: 1-10

080500108057390805807105000410500171050020105100310510161051029105200210520151052028105300110530141053027

10 pc. marker strip, unprinted10-pc. marker strip, labeled horizontally, w/consecutive numbers 1-10, etc. (specify*)As above, except labeled vertically10 pc. marker strip, unprinted10-pc. marker strip, labeled horizontally, w/consecutive numbers 1-10, etc. (specify*)As above, except labeled vertically10 pc. marker strip, unprinted10-pc. marker strip, labeled horizontally, w/consecutive numbers 1-10, etc. (specify*)As above, except labeled vertically10 pc. marker strip, unprinted10-pc. marker strip, labeled horizontally, w/consecutive numbers 1-10, etc. (specify*)As above, except labeled vertically10 pc. marker strip, unprinted10-pc. marker strip, labeled horizontally, w/consecutive numbers 1-10, etc. (specify*)As above, except labeled vertically

0.910.910.910.910.910.910.910.910.910.910.910.910.910.910.91

P e rS t r i p

For Te r m .Wi d t h

4.2 mm

5.2 mm

6.2 mm

8.2 mm

10.2 mm

* Specify consecutive numbers. For example: ZB 4, LGS: 1-10 (or ZB 4, QR: 1-10) ZB 4 ZB 4, LGS: 1-20 etc. up to ZB 4, LGS: 991-1000

Zack (“Quick”) Marking SheetsEach ZBFM marker sheet consists of 50, 100 or 120 white tear-apart markers for marking terminal blocks and small-er modules with marker grooves. Three versions are listed below: unprinted for use with a marking pen: with con-secutive numbers (1-50, 1-100 or 1-120) labeled horizontally: and with 10 identical strips of consecutive numbers (ie1-10, 11-20, etc.). Special marker sheets are also available per customer specifications. Call for details.


ZBFM 4/WH: UNPRINTEDZBFM 4/WH, LGS: 1-100ZBFM 4/WH, LGS: 1-10ZBFM 5/WH: UNPRINTEDZBFM 5/WH, LGS: 1-120ZBFM 5/WH, LGS: 1-12ZBFM 6/WH: UNPRINTEDZBFM 6/WH, LGS: 1-100ZBFM 6/WH, LGS: 1-10ZBFM 8/WH: UNPRINTED ZBFM 8/WH,LGS: 1-50 ZBFM 8/WH, LGS: 1-5

080357908002680803582080359508002710803605080361808002840803621080073408049180804921

100-pc. marker sheet, unprinted100-pc. marker sheet, labeled horizontally w/consecutive number 1-100As above, except w/10 identical strips of consecutive numbers 1-10, etc. Specify120-pc. marker sheet, unprinted120-pc. marker sheet, labeled labeled horizontally, w/consecutive numbers 1-120As above, except w/10 identical strips of consecutive numbers 1-12, etc. Specify100-pc. marker sheet, unprinted100-pc. marker sheet labeled horizontally w/consecutive numbers 1-100As above, except w/10 identical strips of consecutive numbers 1-10, etc. Specify 50-pc. marker sheet, unprinted50-pc. marker sheet, labeled horizontally w/consecutive numbers 1-50As above, except w/10 identical strips of consecutive numbers 1-5, etc. Specify

8.558.558.558.558.558.558.558.558.558.558.558.55

P e rS h e e t

For Te r m .Wi d t h

4.2 mm

5.2 mm

6.2 mm

8.2 mm

ZBFM 4/ or 6/WH, LGS: 1-10, 11-20, etc. up to 91-100. ZBFM 5/WH, LGS: 1-12, 13-24, etc. up to 109-120. ZBFM 8/WH, LGS: 1-5, 6-10, etc. up to46-50.

Accessories for CLIPLINE Terminal BlocksMarker Pens

For manually labeling unprinted marker strips andsheets. Smear-proof and waterproof. Black

Mfr.’s Type

M-PENM-PEN 0-8

Order No.

10519931051728

Tip Size

0.5 mm0.8 mm

Each

9.039.03

M f r. ’s Ty p e Order No. Fits Block E a c h

0.890.72

1.081.110.911.020.761.450.54

30080963003224

2778521277106514132721413285141322703082230321226

UK35UK1.5, UK2.5N,UK3N, UK5N, UK6N, UK10N, UK16N, UK4-TGUKK3, UKK5UKKB3, UKKB5DIK1.5DIKD1.5, DOK1.5MBK3/E-Z, MBK6/E, MBK5/EURTK/S-BENURTK/SS

TP-UK 35ATP-UK

ATP-UKK 3/5ATP-UKKB 3ATP-DIK 1.5ATP-DIKD 1.5ATS-MBKATS-ATK-BENATP-URTK/SS

Partition PlatesATP partition plates extend on all sides above theterminal profile for a clear visual and electrical sep-aration of terminal block groups.

TS Separating PlatesThese plates guarantee electric and visual isolation inthe cases of bridges in the terminal center which are indirect contact with one another. It’s designed to beinserted later and snap locks into place. A separation

plate should be used on both sides for all bridges inthe terminal center.

M f r. ’s Ty p e Order No. Fits Block E a c h

0.17

0.23

0.840.44

2770215

1302215

03082100321213

UK2.5N,UKK3, UKKB3, UKK5,UKKB5,UDK3, UDK4, MBK3/E-7,MBK6/E MBK5/E, MBKKB2.5,MZFKKB1.5, ZDIK1.5, ZVIOK1.5UK3N, UK5N, UK6N, UK10N,UK16N, UK35, UK3-TWIN, UK5-TWINURTK/S-BENURTK/SS

TS-KK 3

TS-K

TS-RTK-BENTS-URTK/SS

Mounting RailsThe design of these mounting rails complies with

European standard EN 50045 (NS 15) and EN 50022(NS 35), and feature outstanding accuracy and sur-face tempering. The steel rails are galvanized and yel-low chromated. A line of dots is marked along the cen-ter of the rail to simplify drilling of mounting holes. Length: 2m (6’6”).

M f r. ’s Ty p e Order No. Dimensions (mm) E a c h

9.0010.0011.0012.0022.0023.00

140169514016820801681080173312017141201730

NS 15 UNPERFORATEDNS 15 PERFORATEDNS 35/7.5 UNPERFORATEDNS 35/7.5 PERFORATEDNS 35/15 UNPERFORATEDNS 35/15 PERFORATED

15

35

35

5.5

7.5

15

1

1

1.5

W H T

End Brackets for Mounting Rails

E/UK

Mounts to end of terminal block assembly to preventblocks from being pushed along mounting rail. FlammabilityRating: UL94V0. Color: gray

M f r. ’s Ty p e O r d e rN o .

Description E a c h

.59

.83

.88

.69

.86

14216591201442120141330222180800886

Snaps on NS 15 mounting rail, 6 mm wide.For NS 32 or NS 35 rail, 9.5 mm wide.As above, except for 2 and 3-level blocks.*Toolless for NS 35 rail, 9.5 mm wideOne screw for NS 32 or NS 35 rail, 9.5mmwide.

E/MK 1E/UKE/UK 1Clipfix 35E/NS 35N

*10 mm wide

Reducing plugReducing plug for connecting a 4 mm test plug to a 2.3 mm test plug socket. Gray.

Mfr.’s Type RPS (Order No. 0201647)... 5.45 Each

Test Plug Sockets4 mm test plug sockets forUK-terminal blocks. Material: Silver-plated brass

E/UKM f r. ’s Ty p e Order No. Fits Block E a c h

.32

.49

.85

060129203032990205290

UK2.5N, UK3N, UK5NUK6N, UK10N, UK16NUK35

PSB 3/10/4PSB 4/7/6PSB 6/5/6

Stripping Tools

These stripping tools "automatically" adjust to the proper AWG depth. QUICK-WIREFOX 6 has an AWG range of 30-10 and QUICK-WIREFOX 16 has arange of AWG 10-6.

50.0093.0022.0032.00

QUICK-WIREFOX 6QUICK-WIREFOX 16QUICK-WIREFOX 6 EMQUICK-WIREFOX 16 EM

1204384120510512043711204944

Mfr.’s Type Order No. Description Each

Stripping Tool, AWG 30-10Stripping Tool, AWG 10-6Repl. Blade for WIREFOX 6Repl. Blade for WIREFOX 16

QUICK-WIREFOX 6 QUICK-WIREFOX 16

Tempered steel to ensure high cutting efficiency overa long period of time. Conductors can be cut easilyand cleanly due to the specific design of the blades.For copper and aluminum conductors and fixedbridges FBI10-6, FBI10-8, FBI10-10, FBI10-12.Cutting capacity (solid strand/multi-strand/finestrand): 10/8/4 AWG.

41.00Cutfox FB 1205985

Mfr.’s Type Order No. Length Each

175mm (6.9")

Cable Cutter

Ideal for ZFK and ST Series spring cage terminalblocks.

l Ergonomically designed l Fully insulated blade shaftl Flat tips

SZF0-0.4X2.5SZF1-0.6X3.5SZF2-0.8X4.0

120450412045171204520

Mfr.’s Type Order No. Blade Size (mm) Each

0.4Tx 2.5W x 750.6T x 3.5W x 1000.8T x 4.0W x 100

Screwdrivers for Spring Cage Terminal Blocks

Length (mm)

160180230

1907The word TELEVISION first appeared In print in

SCIENTIFIC AMERICAN Magazine.

NS 35/7.5

6.007.008.00

Printed Circuit Terminal Blocks


.64

.961.281.591.922.232.552.883.193.153.84.71

1.061.401.762.112.822.463.173.513.874.22.54.82

1.091.361.631.912.172.452.722.993.26.63.95

1.261.571.892.212.522.843.163.473.78.64.97

1.302.583.233.88.67

1.011.351.682.022.362.693.033.363.694.031.021.532.044.556.24

172701017270231727036172704917270521727065172707817270811727094172710417271171728284172829717283071728310172832317283361728349172835217283651728378172838117291281729131172914417291571729160172917317291861729199172920917292121729225186921118692241869237186924018692531869266186927918692821869295186930518693181715721171573417157471715789171580217158281733570173358317335961733606173361917336221733635173364817336511733664173367717117251711738171280517127081714308

MKDS1/2-3.81MKDS1/3-3.81MKDS1/4-3.81MKDS1/5-3.81MKDS1/6-3.81MKDS1/7-3.81MKDS1/8-3.81MKDS1/9-3.81MKDS1/10-3.81MKDS1/11-3.81MKDS1/12-3.81SMKDS1/2-3.81SMKDS1/3-3.81SMKDS1/4-3.81SMKDS1/5-3.81SMKDS1/6-3.81SMKDS1/7-3.81SMKDS1/8-3.81SMKDS1/9-3.81SMKDS1/10-3.81SMKDS1/11-3.81SMKDS1/12-3.81MKDSN1.5/2-5.08MKDSN1.5/3-5.08MKDSN1.5/4-5.08MKDSN1.5/5-5.08MKDSN1.5/6-5.08MKDSN1.5/7-5.08MKDSN1.5/8-5.08MKDSN1.5/9-5.08MKDSN1.5/10-5.08MKDSN1.5/11-5.08MKDSN1.5/12-5.08SMKDSN1.5/2-5.08SMKDSN1.5/3-5.08SMKDSN1.5/4-5.08SMKDSN1.5/5-5.08SMKDSN1.5/6-5.08SMKDSN1.5/7-5.08SMKDSN1.5/8-5.08SMKDSN1.5/9-5.08SMKDSN1.5/10-5.08SMKDSN1.5/11-5.08SMKDSN1.5/12-5.08MKDS1.5/2-5.08MKDS1.5/3-5.08MKDS1.5/4-5.08MKDS1.5/8-5.08MKDS1.5/10-5.08MKDS1.5/12-5.08SMKDSP1.5/2-5.08SMKDSP1.5/3-5.08SMKDSP1.5/4-5.08SMKDSP1.5/5-5.08SMKDSP1.5/6-5.08SMKDSP1.5/7-5.08SMKDSP1.5/8-5.08SMKDSP1.5/9-5.08SMKDSP1.5/10-5.08SMKDSP1.5/11-5.08SMKDSP1.5/12-5.08MKDS3/2-5.08MKDS3/3-5.08MKDS3/4-5.08MKDS3/8-5.08MKDS3/12-5.08

7.3

10

8.1

12

9.8

13.4

11.2

8.5

9.5

10

11

13.8

15.3

18

7.6111.4215.2319.0422.8526.6630.4734.2838.0941.8945.69

7.6111.4215.2319.0422.8526.6630.4734.2838.0941.8945.6910.1615.2420.3225.4030.4835.5640.6445.7250.8055.8860.9611.1616.2421.3326.4031.4836.5641.6446.7251.8056.8861.9610.1615.2420.3240.6450.8060.9610.1615.2420.3225.4030.4835.5640.6445.7250.8055.8860.9610.1615.2420.3240.6460.96

W H L

Multi-Position PCB Terminal Blocks

These terminal blocks are fully enclosed and feature screw connections and nickel-plated copper alloy clamping parts. Both mini and standard versions are avail-able, with straight or angled connections. The four standard versions also feature interlocking design for perfect alignment and pitch retention. Model SMKDSP1.5incorporates test connections for 2.3mm test plugs. Color: green (black or gray available). Approvals: ULRecognized, CSACertified.

MKDS 1

SMKDS 1

MKDSN 1.5

SMKDSN 1.5

MKDS 1.5

SMKDSP1.5

MKDS 3

234567891011122345678910111223456789101112234567891011122348101223456789101112234812

No.of Pos.

Mini PC terminal blockW/straight connectionsPitch: 3.81 mmSpecifications:UL: 300 V@ 10 A, 30-16 AWGIEC: 100 V @ 12 A, 26-16 AWG

Above, except with55

oangled connections

Standard PC terminal blockW/straight connectionsPitch: 5.08 mmSpecifications:UL: 300 V @ 10 A, 30-14 AWGIEC: 250 V @ 13.5 A, 26-16 AW G

As above, except with55

oangled connections

Standard PC terminal blockW/straight connectionsPitch: 5.08 mmSpecifications:UL: 300 V @ 10 A, 30-14 AWGIEC: 250 V @ 22 A, 26-14 AW G

As above, except with35

oangled connections

and test connections

Standard PC terminal blockW/straight connectionsPitch: 5.08 mmSpecifications:UL: 300 V @ 15 A, 30-12 AWGIEC: 250 V @ 28 A, 24-12 AW G

NoteTo label, optional self-adhesive marker cards are available: SK3.81/2.8.. .for blocks with 3.81 mm pitch or SK5.08/3.8... for blocks with 5.08 mm pitch. To order,see “Accessories”.

1830Joseph Henry discovers self-inductance, an efficient electromagnet. The unit of inductance, the Henry, is named for Henry in 1893.

D e s c r i p t i o n

COMBICON Plug-In Connectors


1803578180358118035941803604180361718036201803633180364618036591803662180367518036881803691180370118037141803277180328018032931803303180331618033291803332180334518033581803361180337418033871803390180340018034131803426180343918034421803455180346818034711803484180349718035071803510180352318035361803549180355218035651734634

MC1.5/2-ST-3.81MC1.5/3-ST-3.81MC1.5/4-ST-3.81MC1.5/5-ST-3.81MC1.5/6-ST-3.81MC1.5/7-ST-3.81MC1.5/8-ST-3.81MC1.5/9-ST-3.81MC1.5/10-ST-3.81MC1.5/11-ST-3.81MC1.5/12-ST-3.81MC1.5/13-ST-3.81MC1.5/14-ST-3.81MC1.5/15-ST-3.81MC1.5/16-ST-3.81MC1.5/2-G-3.81MC1.5/3-G-3.81MC1.5/4-G-3.81MC1.5/5-G-3.81MC1.5/6-G-3.81MC1.5/7-G-3.81MC1.5/8-G-3.81MC1.5/9-G-3.81MC1.5/10-G-3.81MC1.5/11-G-3.81MC1.5/12-G-3.81MC1.5/13-G-3.81MC1.5/14-G-3.81MC1.5/15-G-3.81MC1.5/16-G-3.81MCV1.5/2-G-3.81MCV1.5/3-G-3.81MCV1.5/4-G-3.81MCV1.5/5-G-3.81MCV1.5/6-G-3.81MCV1.5/7-G-3.81MCV1.5/8-G-3.81MCV1.5/9-G-3.81MCV1.5/10-G-3.81MCV1.5/11-G-3.81MCV1.5/12-G-3.81MCV1.5/13-G-3.81MCV1.5/14-G-3.81MCV1.5/15-G-3.81MCV1.5/16-G-3.81CP-MSTB

15.5 11.1

8.4112.2216.0319.3023.6527.4631.2735.0838.8942.7046.5150.3254.1357.9461.75

9.0112.8216.6320.4424.2528.0631.8735.6839.4943.3047.1150.9254.7358.5462.35

9.0112.8216.6320.4424.2528.0631.8735.6839.4943.3047.1150.9254.7358.5462.35

W H L

MINI-COMBICON Plugs and Headers

The Mini-Combicon Series is a low profile connector with a generous wire range and is available from 2 to 20 positions. It features a unique design where eachplug can be keyed specifically to a corresponding header to prevent mismatched connections in close proximity. The keying is accomplished by the combination ofcutting away molded elements on the plugs, and inserting optional key tabs in the corresponding grooves of the header. Color: green (black or gray available).Approvals: ULRecognized, CSACertified. Optional self-adhesive marker cards SK3.81/2.8... are used for labeling. To order, see “Accessories”.

234567891011121314151623456789101112131415162345678910111213141516

No. of Pos.

MINI-COMBICON plug w/straightplug-in

Pitch: 3.81 mmSpecifications:UL: 300 V @ 8 A, 30-14 AWGIEC: 160 V @ 8 A, 28-16 AW G

MINI-COMBICON headerw/straight plug-in

Pitch: 3.81mmSpecifications:UL: 300 V @ 8 AIEC: 160 V @ 8 A

MINI-COMBICON header w/ verti-cal plug-in

Pitch: 3.81 mmSpecifications:UL: 300 V @ 8 AIEC: 160 V @ 8 A


Insertable key tabs, red (100 piece package). Inserts into the slots on Mini-Combicon headers.

COMBICON Plugs and HeadersStandard COMBICON plugsand headers are available in 2to 24 positions with and withoutscrew flanges and in 5.08 mmpitch (5.0 mm pitch also avail-able). They feature generousconnection space and highervoltage and current ratingsthan the MINI-COMBICONseries. Plugs with 2.3 mm testconnections are also available(call for details). Color: Green(black or gray availble onrequest). Approvals: ULrecog-nized, CSAcertified. Optionalself-adhesive marker cardsSK5.08/3.8... are used forlabeling. To order, see“Accessories”.

MC1.5/...-ST-...

MC1.5/...-G-...

MCV1.5...-G-...


1.041.552.062.573.093.604.114.645.155.666.177.588.178.759.339.91

10.5011.0911.6712.2512.8313.4113.99

17570191757022175703517570481757051175706417570771757080175709317571031757116175712917571321757145175715817571611757174175718717571901757200175721317572261757239

MSTB2.5/2-ST-5.08MSTB2.5/3-ST-5.08MSTB2.5/4-ST-5.08MSTB2.5/5-ST-5.08MSTB2.5/6-ST-5.08MSTB2.5/7-ST-5.08MSTB2.5/8-ST-5.08MSTB2.5/9-ST-5.08MSTB2.5/10-ST-5.08MSTB2.5/11-ST-5.08MSTB2.5/12-ST-5.08MSTB2.5/13-ST-5.08MSTB2.5/14-ST-5.08MSTB2.5/15-ST-5.08MSTB2.5/16-ST-5.08MSTB2.5/17-ST-5.08MSTB2.5/18-ST-5.08MSTB2.5/19-ST-5.08MSTB2.5/20-ST-5.08MSTB2.5/21-ST-5.08MSTB2.5/22-ST-5.08MSTB2.5/23-ST-5.08MSTB2.5/24-ST-5.08

18.2 15

10.1615.2420.3625.4030.4835.5640.1445.7250.8055.8860.9666.0471.1276.2081.2886.3691.4496.52

101.60106.68111.76116.84121.92

W H L23456789101112131415161718192021222324

No. of Pos.

COMBICON plug w/straight plug-in



COMBICON Plugs andHeaders (Continued on

next page)

9.2

7.25

11.1

9.2

1.211.812.413.043.624.224.825.436.036.637.237.848.449.049.64.42.63.84

1.051.261.471.671.892.102.302.522.732.933.143.36.42.63.84

1.051.261.471.671.892.102.302.522.732.893.143.36.05



1.321.962.603.233.884.525.165.796.447.087.728.359.009.64

10.2610.9111.5612.2012.84

1.191.772.372.963.564.154.745.345.926.527.118.739.40

10.0710.7411.4112.0912.7613.4214.1014.7715.4416.12

1.191.772.372.963.564.154.745.345.926.527.118.739.40

10.0710.7411.4112.0912.7613.4214.1014.7715.4416.12

.36

.54

.72

.901.071.251.431.611.791.972.152.642.853.043.243.453.653.864.064.264.474.664.88

1777989177799217780011778014177802717780301778043177805617780691778072177808517780981778108177811117781241778137177814017781531778166

17922491792252179226517922781792281179229417923041792317179232017923331492346179235917923621792375179238817923911792401179241417924271792430179244317924561792469

17927571792760179277317927861792799179280917928121792825179283817928411792854179286717928701792883179289617929061792919179292217929351792948179295117929641792977

17590171759020175903317590461759059175906217590751759088175909117591011759114175912717591301759143175915617591691759172175918517591981759208175921117592241759237

MSTB2.5/2-STF-5.08MSTB2.5/3-STF-5.08MSTB2.5/4-STF-5.08MSTB2.5/5-STF-5.08MSTB2.5/6-STF-5.08MSTB2.5/7-STF-5.08MSTB2.5/8-STF-5.08MSTB2.5/9-STF-5.08MSTB2.5/10-STF-5.08MSTB2.5/11-STF-5.08MSTB2.5/12-STF-5.08MSTB2.5/13-STF-5.08MSTB2.5/14-STF-5.08MSTB2.5/15-STF-5.08MSTB2.2/16-STF-5.08MSTB2.5/17-STF-5.08MSTB2.5/18-STF-5.08MSTB2.5/19-STF-5.08MSTB2.5/20-STF-5.08

MVSTBR2.5/2-ST-5.08MVSTBR2.5/3-ST-5.08MVSTBR2.5/4-ST-5.08MVSTBE2.5/5-ST-5.08MVSTBR2.5/6-ST-5.08MVSTBR2.5/7-ST-5.08MVSTBE2.5/8-ST-5.08MVSTBR2.5/9-ST-5.08MVSTBR2.5/10-ST-5.08MVSTBR2.5/11-ST-5.08MVSTBR2.5/12-ST-5.08MVSTBR2.5/13-ST-5.08MVSTBR2.5/14-ST-5.08MVSTBR2.5/15-ST-5.08MVSTBR2.5/16-ST-5.08MVSTBR2.5/17-ST-5.08MVSTBR2.5/18-ST-5.08MVSTBR2.5/19-ST-5.08MVSTBR2.5/20-ST-5.08MVSTBR2.5/21-ST-5.08MVSTBR2.5/22-ST-5.08MVSTBR2.5/23-ST-5.08MVSTBR2.5/24-ST-5.08

MVSTBW2.5/2-ST-5.08MVSTBW2.5/3-ST-5.08MVSTBW2.5/4-ST-5.08MVSTBW2.5/5-ST-5.08MVSTBW2.5/6-ST-5.08MVSTBW2.5/7-ST-5.08MVSTBW2.5/8-ST-5.08MVSTBW2.5/9-ST-5.08MVSTBW2.5/10-ST-5.08MVSTBW2.5/11-ST-5.08MVSTBW2.5/12-ST-5.08MVSTBW2.5/13-ST-5.08MVSTBW2.5/14-ST-5.08MVSTBW2.5/15-ST-5.08MVSTBW2.5/16-ST-5.08MVSTBW2.5/17-ST-5.08MVSTBW2.5/18-ST-5.08MVSTBW2.5/19-ST-5.08MVSTBW2.5/20-ST-5.08MVSTBW2.5/21-ST-5.08MVSTBW2.5/22-ST-5.08MVSTBW2.5/23-ST-5.08MVSTBW2.5/24-ST-5.08

MSTB2.5/2-G-5.08MSTB2.5/3-G-5.08MSTB2.5/4-G-5.08MSTB2.5/5-G-5.08MSTB2.5/6-G-5.08MSTB2.5/7-G-5.08MSTB2.5/8-G-5.08MSTB2.5/9-G-5.08MSTB2.5/10-G-5.08MSTB2.5/11-G-5.08MSTB2.5/12-G-5.08MSTB2.5/13-G-5.08MSTB2.5/14-G-5.08MSTB2.5/15-G-5.08MSTB2.5/16-G-5.08MSTB2.5/17-G-5.08MSTB2.5/18-G-5.08MSTB2.5/19-G-5.08MSTB2.5/20-G-5.08MSTB2.5/21-G-5.08MSTB2.5/22-G-5.08MSTB2.5/23-G-5.08MSTB2.5/24-G-5.08

18.2

12.6

12.6

12

15

26

26

8.6

19.9625.0430.1235.3040.2845.3650.4455.5260.6065.6870.7675.8480.9286.0091.0896.16

101.24106.32111.40

10.1615.2420.3225.4030.4835.5640.6445.7250.8055.8860.9666.0471.1276.2081.2886.3691.4496.52

101.60106.68111.76116.84121.92

10.1615.2420.3225.4030.4835.5640.6445.7250.8055.8860.9666.0471.1276.2081.2886.3691.4496.52

101.60106.68111.76116.84121.92

10.1615.2420.3225.4030.4835.5640.6445.7250.8055.8860.9666.0471.1276.2081.2886.3691.4496.52

101.60106.68111.76116.84121.92

W H L234567891011121314151617181920

23456789

101112131415161718192021222324

23456789101112131415161718192021222324

23456789

101112131415161718192021222324

No. of Pos.

COMBICON plug w/straight plug-inand screw flanges


Note: Length includes screwflanges

COMBICON plug w/plug-in direc-tion vertical to the conductor axisand connection point facing thesmooth wall of the header.


Note: Can be key-coded usingoptional coding tabs CP-MSTB (forthe plug) and CR-MSTB (for thecorresponding header). To order,see “Accessories”.

As above, except connection pointfaces the rippled wall of the head-er.


Note: Can be key-coded usingoptional coding tabs CP-MSTB (forthe plug) and CR-MSTB (for thecorresponding header). To order,see “Accessories”.

C O M B I C O N h e a d e r, open endw/right angled contact/solder pins.

Pitch: 5.08 mmSpecifications:UL: 300 V @ 10 AIEC: 250 V @ 12 A


MSTB2.5/...-STF

MVSTBR2.5/...-ST

MVSTBW2.5/...-ST

COMBICON Plugs and Headers (Continued from previous page)

MSTB2.5/...-G

COMBICON Plugs and Headers (Continued on next page)



.36

.54

.72

.901.071.251.431.611.711.972.152.642.853.043.243.453.653.864.064.264.474.664.88

1.411.631.852.062.282.502.712.943.153.373.593.804.024.234.464.905.115.32

.36

.5472

.901.071.231.431.611.791.972.152.642.853.043.243.453.653.864.064.264.474.664.88

.36

.54

.72

.901.071.231.431.611.791.972.152.642.853.043.243.453.653.864.064.264.474.664.88

17572421757255175726817572711757284175729717573071757310175732317573361757349175735217573651757378175738117573941757404175741717574201757433175744617574591757462

177650817765111776524177653717765401776553177656617765791776582177659517766051776618177662117766341776647177666317766761776689

17580181758021175803417580471758050175806317580761758089175809217581021758115175812817581311758144175815717581601758173175818617581991758209175821217582251758238

17557361755749175575217557651755778175578117557941755804175581717558201755833175584617558591755862175587517558881755891175590117559141755927175593017559431755956

MSTBA2.5/2-G-5.08MSTBA2.5/3-G-5.08MSTBA2.5/4-G-5.08MSTBA2.5/5-G-5.08MSTBA2.5/6-G-5.08MSTBA2.5/7-G-5.08MSTBA2.5/8-G-5.08MSTBA2.5/9-G-5.08MSTBA2.5/10-G-5.08MSTBA2.5/11-G-5.08MSTBA2.5/12-G-5.08MSTBA2.5/13-G-5.08MSTBA2.5/14-G-5.08MSTBA2.5/15-G-5.08MSTBA2.5/16-G-5.08MSTBA2.5/17-G-5.08MSTBA2.5/18-G-5.08MSTBA2.5/19-G-5.08MSTBA2.5/20-G-5.08MSTBA2.5/21-G-5.08MSTBA2.5/22-G-5.08MSTBA2.5/23-G-5.08MSTBA2.5/24-G-5.08

MSTB2.5/2-GF-5.08MSTB2.5/3-GF-5.08MSTB2.5/4-GF-5.08MSTB2.5/5-GF-5.08MSTB2.5/6-GF-5.08MSTB2.5/7-GF-5.08MSTB2.5/8-GF-5.08MSTB2.5/9-GF-5.08MSTB2.5/10-GF-5.08MSTB2.5/11-GF-5.08MSTB2.5/12-GF-5.08MSTB2.5/13-GF-5.08MSTB2.5/14-GF-5.08MSTB2.5/15-GF-5.08MSTB2.5/16-GF-5.08MSTB2.5/18-GF-5.08MSTB2.5/19-GF-5.08MSTB2.5/20-GF-5.08

MSTBV2.5/2-G-5.08MSTBV2.5/3-G-5.08MSTBV2.5/4-G-5.08MSTBV2.5/5-G-5.08MSTBV2.5/6-G-5.08MSTBV2.5/7-G-5.08MSTBV2.5/8-G-5.08MSTBV2.5/9-G-5.08MSTBV2.5/10-G-5.08MSTBV2.5/11-G-5.08MSTBV2.5/12-G-5.08MSTBV2.5/13-G-5.08MSTBV2.5/14-G-5.08MSTBV2.5/15-G-5.08MSTBV2.5/16-G-5.08MSTBV2.5/17-G-5.08MSTBV2.5/18-G-5.08MSTBV2.5/19-G-5.08MSTBV2.5/20-G-5.08MSTBV2.5/21-G-5.08MSTBV2.5/22-G-5.08MSTBV2.5/23-G-5.08MSTBV2.5/24-G-5.08

MSTBVA2.5/2-G-5.08MSTBVA2.5/3-G-5.08MSTBVA2.5/4-G-5.08MSTBVA2.5/5-G-5.08MSTBVA2.5/6-G-5.08MSTBVA2.5/7-G-5.08MSTBVA2.5/8-G-5.08MSTBVA2.5/9-G-5.08MSTBVA2.5/10-G-5.08MSTBVA2.5/11-G-5.08MSTBVA2.5/12-G-5.08MSTBVA2.5/13-G-5.08MSTBVA2.5/14-G-5.08MSTBVA2.5/15-G-5.08MSTBVA2.5/16-G-5.08MSTBVA2.5/17-G-5.08MSTBVA2.5/18-G-5.08MSTBVA2.5/19-G-5.08MSTBVA2.5/20-G-5.08MSTBVA2.5/21-G-5.08MSTBVA2.5/22-G-5.08MSTBVA2.5/23-G-5.08MSTBVA2.5/24-G-5.08

12

12

8.6

8.6

8.6

8.6

12

12

12.1617.2422.3227.4032.4837.5642.6447.7252.8057.8862.9668.0473.1278.2083.2888.3693.4498.52

103.60108.68113.76118.84123.92

20.3225.4030.4835.5640.6445.7250.8055.8860.9666.0471.1276.2081.2886.3691.44

101.60106.68111.76

10.1615.2420.2225.4030.2835.5640.6445.7250.8055.8860.9666.0471.1276.2081.2886.3691.4496.52

101.60106.68111.76116.84121.92

12.1617.2422.3227.4032.4837.5642.6447.7252.8057.8862.9668.0473.1278.2083.2888.3693.4498.52

103.60108.68113.76118.84123.92

W H L23456789101112131415161718192021222324

23456789

10111213141516181920

23456789

101112131415161718192021222324

23456789

101112131415161718192021222324

No. of Pos.

COMBICON headers with side panels with right angledcontact/solder pins

Pitch: 5.08 mmSpecifications:UL: 150 V @ 15 A & 300 V @10 AIEC: 250 V @ 12A

COMBICON header w/screwflanges,with right angledcontact/solder pins

Pitch: 5.08 mmSpecifications:UL: 150 V @ 15 A & 300 V @ 10 AIEC: 250 V @ 12 A

COMBICON header, open-end,with vertical plug-in

Pitch: 5.08 mmSpecifications:UL: 150 V @ 15 A & 300 V @ 10 AIEC: 250 V @ 12 A

COMBICON header with side panels,

with vertical plug-inPitch: 5.08 mmSpecifications:UL: 150 V @ 15 A & 300 V @ 10 AIEC: 250 V @ 12 A


MSTBA2.5/...-G

MSTB2.5/...-GF

MSTBV2.5/...-G

COMBICON Plugs and Headers (Continued from previous page)

MSTBVA2.5/...-G

Power-COMBICON Plugs and Headers

POWER-COMBICON plug with straightPlug-in

Pitch: 7.62 mmAWG: 24-10Rating: 400 V, 20 A

POWER-COMBICON header withRight angled contact/solder pins

Pitch: 7.62 mmRating: 400 V, 20 A

Insertable key tabs (100 piece package). Inserts into the slotsOn the POWER-COMBICON plugs and headers.

Double-level COMBICON header, open-end, with offset levels and right angled contact/solder pins. Pitch: 5.08 mmSpecifications:UL: 150 V @ 15 A & 300 V @ 10 AIEC: 250 V @ 10 A

Optional side element for lateral sealing of MDSTB2.5/...-GOptional ejector, assembles on each side of MDSTB2.5/...-G

Double-level COMBICON header withSide panels, without offset levels,W / right angled contact / solder pins

Pitch: 5.08 mmRating: 250 V, 10 A



1.311.96

.252.10

2.222.794.465.205.946.687.438.178.919.65

10.3911.1411.8812.6313.3614.1114.85

17620621762075

17866791806588

17623761736713176241517624281762431176244417624571762460176270317624731762486176249917625091762512176252517625381762680

MDSTB2.5/2-G-5.08MDSTB2.5/3-G-5.08

MDSTB-SEMDSTB2.5-AS

MDSTB2.5/3-G1-5.08MDSTB2.5/4-G1-5.08MDSTB2.5/6-G1-5.08MDSTB2.5/7-G1-5.08MDSTB2.5/8-G1-5.08MDSTB2.5/9-G1-5.08MDSTB2.5/10-G1-5.08MDSTB2.5/11-G1-5.08MDSTB2.5/12-G1-5.08MDSTB2.5/13-G1-5.08MDSTB2.5/14-G1-5.08MDSTB2.5/15-G1-5.08MDSTB2.5/16-G1-5.08MDSTB2.5/17-G1-5.08MDSTB2.5/18-G1-5.08MDSTB2.5/19-G1-5.08MDSTB2.5/20-G1-5.08

22.32*22.32*

22

23.523.5

28.5

12.7017.79

17.2422.3232.4837.5642.6447.7252.8057.8862.9668.0473.1278.2083.2888.3693.4498.52

103.60

W H L23

3467891011121314151617181920

No. of Pos. D e s c r i p t i o n

MDSTB2.5/...G

MDSTB2.5/...G1

Double-Level COMBICON HeadersThe MDSTB2.5/...-G-double-level headers are offset by 10 mm in the plug-in direction and by half a pitch (2.54 mm) to improve visibility of and accessibility to thebottom level. By fitting the 2-and 3-position double-level blocks in rows so that they interlock, any number of straight plug-in positions can be created. The levels of MDSTB2.5/...-G1 are not offset. They are supplied in blocks with 3, 4, 6, or up to 20 fixed positions per level and always have side panels to preventincorrect plug insertion. Color: green (black or gray available on request). Approvals: ULRecognized, CSACertified. Optional self-adhesive marker cards SK5.08/3.08 mm are used for labeling. To order, see “accessories” below.

*lower level width

POWER-COMBICON is a new improved version of the “standard” COMBICON connectors. It features a higher current capacity, an extended wire range and asmall pitch of 7.62 mm. Both the plugs and headers can be key coded using optional CP-HCC4 coding tabs. Color: green. Approvals: ULRecognized, CSACertified. Optional self-adhesive marker cards SK 7.62/3.8 mm are used for labeling. To order, see “Accessories” below.


2.834.235.657.068.489.88

11.3012.7114.1315.5316.94

2.834.235.657.068.489.88

11.3012.7114.1315.5316.74

0.05

18049041804917180492018049331804946180495918049621804975180498818049911805000

18047971804907180481018048231804836180484918048521804865180487818049811804894

1600027

PC4/2-ST-7.62PC4/3-ST-7.62PC4/4-ST-7.62PC4/5-ST-7.62PC4/6-ST-7.62PC4/7-ST-7.62PC4/8-ST7.62PC4/9-ST-7.62PC4/10-ST-7.62PC4/11-ST-7.62PC4/12-ST-7.62

PC4/2-G-7.62PC4/3-G-7.62PC4/4-G-7.62PC4/5-G-7.62PC4/6-G-7.62PC4/7-G-7.62PC4/8-G-7.62PC4/9-G-7.62PC4/10-G-7.62PC4/11-G-7.62PC4/12-G-7.62

CP-HCC4

30.7

29

18

14.3

15.2222.8430.4638.0845.7053.3260.9468.5776.1883.8091.42

15.2222.8430.4638.0845.7053.3260.9468.5776.1883.8091.42

W H L23456789101112

23456789101112

No. of Pos. D e s c r i p t i o n

Features

l High Current Capacity

l Expanded conductor size

l Optional key-coding

M f r. ’s Ty p e Order N o .

E a c h

3.733.733.203.203.203.205.450.050.05

552769856000095527740560001455277795600017020164717346341734401

SK3.81/2.8 :UNPRINTEDSK3.81/2.8:1-10SK5.08/3.8: UNPRINTEDSH5.08/3.8:1-10SK7.62/3.8:UNPRINTEDSK7.62/3.8:1-10RPSCP-MSTBCR-MSTB

140 pc. Marker card, unprinted, 14 rows of 10 w/pitch division marks140 pc. Marker card, 14 rows of 10 identical consec. nos. 1-10, 11-20, etc: up to 91-100 (specify)120 pc. Marker card, unprinted, 12 rows of 10 w/pitch division marks120 pc. Marker card, 12 rows of 10 identical consec. nos. 1-10, 11-20, etc: up to 91-100 (specify)120 pc. Marker card, unprinted, 12 rows of 10 w/pitch division marks120 pc. Marker card, 12 rows of 10 identical consec. nos. 1-10,11-20, etc: up to 91-100 (specify)Test plug for SMKDSP1.5 for connecting a 4 mm test plug to a 2.3 mm test socket, grayInsertable key tabs, red (100 pc. package)Insertable key tabs, red (100 pc. package)


Accessories for PCB Terminal Blocks and COMBICON Connectors

The PLC interface provides all the advantages of proven modular terminal block technology. As an interface between an automated device and the system periph-erals, it is equipped with either a plug-in miniature relay (PLC-R) or optocoupler (PLC-O) which is easily removed with the built-in ejector latch. Additional optionsare provides by the actuators (...ACT) and sensor (...SEN) versions, which accept all connections directly at the interface without additional power distribution blocks.Insulated, color-coded plug-in jumpers (32A) permit bridging of modules. The jumper, which can be used on the input and output sides, is a continuous bridge whichcan be cut to length. Input terminal block (PLC-ESK is the same shape as the PLC interface terminal blocks. It is used to feed bridging potentials and has a nom-inal current of 32 A. When total current is less than or equal to 6 A, the inputs can take place directly at the PLC interface terminal blocks. Separating plate PLC-ATP, is always required at the start and end of each terminal strip. It can be used for visual separation of groups, separation of neighboring bridges or separationof PLC interfaces with voltages greater than 250 V. PLC-ATP has pre-scored breakout points at the bridging positions so that individual bridges can pass throughif needed. Relays and optocouplers are hermetically sealed (IP67). Mounting: NS35 rails. Flammability Rating: UL94V0. AWG Range: 26-14. Connections:screw. Color: green. Dimensions: (W x L x H): 6.2 x 80 x 94 mm (terminal width of PLC-R.../21-21 and PLC-RI.../1-1ACTis 14 mm). Marker strips for labelingare available.

Interface Terminal BlocksPLC Series


PLC-RSC-24DC/21AUPLC-RSC-24UC/21AUPLC-RSC-120UC/21AUPLC-RSC- 230UC/21AU

PLC-RSC-24DC/21PLC-RSC-24UC/21PLC-RSC-120UC/21PLC-RSC-230UC/21

PLC-OSC-24DC/48DC/100PLC-OSC-120UC/48DC/100PLC-OSC-230UC/48DC/100

PLC-OSC-24DC/24DC/2PLC-OSC-120UC/24DC/2PLC-OSC-230UC/24DC/2

PLC-RSC-24DC/1/ACT

PLC-OSC-24DC/24DC/2/ACT

PLC-RSC-24DC/1AU/SENPLC-RSC-120UC/1AU/SENPLC-RSC-230UC/1AU/SEN

PLC-OSC-24DC/48DC/100/SENPLC-OSC-120UC/48DC/100/SENPLC-OSC-230UC/48DC/100/SEN

PLC-RSC-24DC/21-21AUPLC-RSC-24UC/21-21AUPLC-RSC-120UC/21-21AUPLC-RSC-230UC/21-21AU

PLC-RSC-24DC/21-21PLC-RSC-24UC/21-21PLC-RSC-120UC/21-21PLC-RSC-230UC/21-21

PLC-RSC-24DC/1-1/ACT

2966265296627829662812966294

2966171296618429661972966207

296672829667442966757

296663429666502966663

2966210

2966676

296631729663202966333

296677329667992966809

2967125296711229671382967141

2967060296707329670862967099

2967109

19.0022.0024.0028.00

14.0021.5016.0026.00

27.0034.0034.00

40.0044.0044.00

17.00

40.00

18.0024.0027.00

26.0033.0034.00

27.0028.0036.0036.00

19.0026.0023.0034.00

26.00

PLC standard series w/plugable relay (S P D T): AgSnO + gold plated contacts

As above, except w/ AgSnO contacts

PLC standard series w/plugable input optical coupler

As above, except w/power optical coupler

PLC actuator w/plugable relay (1 N/O): W/AgSnO Contacts

PLC actuator w/plugable power optical coupler

PLC sensor w/plugable relay (1 N/O), w/AgSnO contacts

PLC sensor w/plugable input optical coupler

PLC standard series w/plugable relay (2 P D T), w/AgNi + gold plated contacts

As above, except AgNi contacts

PLC actuator w/plugable relay (2 N/O), w/AgNi contacts

E a c h

24 VDC24 VAC/DC

120VAC/110VDC230VAC/220VDC

24 VDC24 VAC/DC

120 VAC/110 VDC230 VAC/220 VDC

24 VDC120 VAC/110 VDC230 VAC/220 VDC


24 VDC

24 VDC



24 VDC24 VAC/DC


24 VDC24 VAC/DC


24 VDC

PLC-R.../21

Approvals: CE, VDE, CSA(CE only for PLC-R.../21-21 and PLC-R.../1-1/ACT; VDE, UL, CSAapplied for)

PLC-O... PLC-R...ACT PLC-O...ACT PLC-R...SEN PLC-O...SEN PLC-R.../21-21 PLC-R.../1-1/ACT

Input Vo l t a g e

Accessories for PLC Series

PLC-ESK GY

PLC-ATP BK

FBST500-PLC RD

FBST500-PLC BU

FBST500-PLC GY

ZB 6

ZB 10


2966508

2966841

2966786

2966692

2966838

...

...

15.00

1.4916.00

16.00

16.00

.91

.91

Input terminal block, 9 mm wide, AWG 24-10, 250 V, 32 A, gray

Separating plate, 2 mm thick, black

Plug-in jumper, 500 mm (19.7”) long, 32 A max., cuttable,

Marker strips (order data, see “Accessories for TerminalBlocks” in Modular Terminal Block section)

E a c h

All PLC blocks

All PLC Blocks

All PLC Blocks

All PLC blocks, except PLC-R.../21-21, PLC-R...1-1/ACT

PLC-R.../21-21, PLC-R.../1-1/ACT

For Terminal Blocks

RedBlueGray

Varioface modules are universal interface elements that simplify system wiring between the peripherals and input-output levels of automation devices. They areelectrically connected, position by position, on the input and output sides. These modules are available with either ribbon or D-Sub connectors, with or without alight indicator in each signal path. The ribbon connector modules offer a compact 2-level version with 2.3 mm test connections (FLK), a standard 2-level version(FLKM), and a 3-level version (FLKMS). The D-Sub connector modules offer a compact 3-level version with test connections (FLK-D...SUB), a standard 2-level

version (FLKM-D...SUB) and a 2-level version with a light indicator for each connection point (FLKM-D...SUB/LA). Each moduleincludes a PMB marker carrier for labeling the module. Connections: screw. Color: green. Mounting: universal.

Interface ModulesVARIOFACE modules with Ribbon Cable or D-Sub Plug Connectors


FLK 10FLK 16FLK 20FLK 26

FLKM 10FLKM 14FLKM 16 FLKM 20 FLKM 26FLKM 34FLKM 40FLKM 50FLKM 60FLKM 64

FLKMS 16FLKMS 20FLKMS 26FLKMS 34FLKMS 40FLKMS 50FLKMS 60FLKMS 64

FLK-D25 SUB/SFLK-D37 SUB/SFLK-D50 SUB/S

FLK-D25 SUB/BFLK-D37 SUB/BFLK-D50 SUB/B

FLKM-D9 SUB/SFLKM-D15 SUB/SFLKM-D25 SUB/SFLKM-D37 SUB/SFLKM-D50 SUB/S

FLKM-D9 SUB/BFLKM-D15 SUB/BFLKM-D25 SUB/BFLKM-D37 SUB/BFLKM-D50 SUB/B

FLKM-D9 SUB/S/LAFLKM-D15 SUB/S/LAFLKM-D25 SUB/S/LAFLKM-D37 SUB/S/LAFLKM-D50 SUB/S/LA

FLKM-D9 SUB/B/LAFLKM-D15 SUB/B/LAFLKM-D25 SUB/B/LAFLKM-D37 SUB/B/LAFLKM-D50 SUB/B/LA

2280077228008022800192280051

2281018228102122810342281047228105022810632281076228108922810922281102

22815422281555228156822815712281584228159722816072281610

228362122836342283647

228365022836632283676

22811282281131228114422811152281157

22811862281199228120922812122281225

22816232281636228164922816522281665

22816782281681228169422817042281717

32.0042.0041.0052.00

28.0032.0036.0039.0044.0053.0062.0071.0098.00

103.00

43.0054.0065.0083.0095.00

108.00132.00142.00

65.0079.00

102.00

65.0079.00

102.00

33.0043.0048.0066.0089.00

33.0047.0051.0066.0089.00

64.0081.00

116.00157.00179.00

65.0082.00

117.00158.00182.00

Ribbon cable pin strip module, compact 2-level w/test connectionsAWG: 24-12Rating: 60 VAC, 1A

Ribbon cable pin strip module, standard 2-levelAWG: 24-12Rating: 60 VAC, 1A

Ribbon cable pin strip module, standard 3-levelAWG: 24-12Rating: 60 VAC, 1A

D-SUB pin strip module, compact 3-level w/test connections AWG: 24-12 Rating: 125 VAC/DC, 2.5 A

D-SUB socket strip module, compact standard 3-levelAWG: 24-12 Rating: 125 VAC, 2.5 A

D-SUB pin strip module, standard 2-levelAWG: 24-12Rating: 125 VAC/DC, 2.5 A

D-SUB socket strip module, standard 2-levelAWG: 24-12Rating: 125 VAC/DC, 2.5 A

D-Sub pin strip module, 2-level w/light indicatorAWG: 24-12Rating: 24 VDC, 2.5 A*

D-Sub socket strip module, 2-level w/light indicatorAWG: 24-12Rating: 24 VDC, 2.5 A*

E a c h

50

77

77

51.651.671.0

51.651.671.0

77

77

77

77

FLK 10...26

FLKM 10...64

FLKMS 16...64

FLK-D...SUB

FLKM-D...SUB

FLKM-D...SUB/LA

Dimensions (mm)

Accessories

ES/LP-BW

RPS


1003446

0201647

.78

5.45

25-pc. perforated blank insert labels for PMB marker carrier

Test plug, for connecting a 4 mm test plug to a 2.3 mm test socket

E a c h

10162026

10141620263440506064

1620263440506064

253750

253750

915253750

915253750

915253750

915253750

No. ofp o s . W

56.6

58.5

72

51.751.761.5

51.751.761.5

58.5

58.5

58.5

58.5

H60.060.060.075.5

45.045.067.567.590.0112.5112.5135.0180.0180.0

45.056.567.579.079.0

101.5112.5124.0

71.096.086.0

71.096.086.0

45.067.590.0112.5112.5

45.067.590.0112.5112.5

45.067.590.0

112.5157.5

45.067.590.0

112.5157.5

L

*50 position module: A=0.5

1835Joseph Henry invents the relay to overcome the resistance of long telegraph lines.

Henry did not patent his ideas, thus setting the stage for Samuel Morse.

With these MCR (passive) loop-powered isola-tors, a standard signal of 0 (4) - 20 mAcan beisolated, filtered and amplified in one conver-sion step. Since the isolator requires no exter-nal power, installation time and cost is greatlyreduced. These components guarantee poten-tial separation between the control electronicsand peripherals. In addition, interference sig-nals above 75 Hz are suppressed. These mod-

ules snap onto 35 mm wide DIN-rails and are available in 1, 2 and 4-channelversions. Dimensions: 99 x 114.5 x 12.5 mm (1 and 2 channel models), 99 x114.5 x 22.5 mm (4-channel model). Max. input: 30 V, 100 mA. Color: green.Approvals: CE.

Isolation Amplifiers and Power Supply UnitsMCR Loop-Powered Isolator

M f r. ’s Ty p e Order No.I n p u tVA C

QUINT-PS-120AC/24DC/1QUINT-PS-120AC/24DC/2.5QUINT-PS-120AC/24DC/2.5/FQUINT-PS-120AC/24DC/5QUINT-PS-120AC/24DC/5/FQUINT-PS-120AC/24DC/10QUINT-PS-120AC/24DC/10/FQUINT-PS-3X207AC/24DC/20QUINT-PS-3X207AC/24DC/20/FQUINT-PS-3X400AC/24DC/20QUINT-PS-3X400AC/24DC/20/FQUINT-PS-3X207AC/24DC/30QUINT-PS-3X207AC/24DC/30/FQUINT-PS-3X400AC/24DC/30QUINT-PS-3X400AC/24DC/30/FQUINT-PS-3X207AC/24DC/40QUINT-PS-3X207AC/24DC/40/FQUINT-PS-3X400AC/24DC/40QUINT-PS-3X400AC/24DC/40/F

2939247293905629392502939069293926329390722939276293945429395512939467293956429390982939292293919529393992939645293974229398492939946

120.00163.00200.00253.00290.00380.00425.00500.00550.00500.00550.00650.00700.00650.00700.00770.00820.00770.00820.00

120120120120120120120

3x2073x2973x4003x4003x2073x2073x4003x4003x2073x2073x4003x400

E a c h

107141141180180180180

240

230

286

MCR...CLP-I/1-00

Dimensions (mm)W

7878787878115115

115

156

156

H8787878787

125125

125

150

150

L

l With analog signal isolationl No additional supplyl CE Mark

M f r. ’s Ty p e Order No.

MCR-1CLP-I/I-00MCR-2CLP-I/I-00MCR-4CLP-I/I-00

281401628140292814045

280.00365.00645.00

E a c h

0(4)-20 mA

I n p u t /O u t p u t

1 channel2-channel4-channel

O u t p u tS i g n a l

This outlet is fully enclosed, shock proof andthe ground prongs are reversed for greater protection. It snaps onto 35 mmwide DIN-rails and can be mounted either vertically or horizontally. Screw clampterminal block, VDFK4 provides reliable connections. Three versions are avail-able: 15 A, 20 A, or 15 A with ground fault interruption. (GFI).

Dual Utility Outlet


EM-DUO-120/15EM-DUO-120/15-GFIEM-DUO-120/20

560046156004625600525

35.0058.0035.00

E a c h

Dual outlet, 15 ADual outlet w/GFI, 15 ADual outlet, 20 A

Output Signal

General Specifications

Technical DataRated voltage . . . . . . . . . . . . . 120 V acRated Current . . . . . . . . . . . . . 15/20 ampsMaximum wire size . . . . . . . . . #10 AWG

Housing DataColor . . . . . . . . . . . . . . . . . . . . IvoryMaterial . . . . . . . . . . . . . . . . . . PVC 94V-0Maximum temperature . . . . . . . 70

oC

DimensionsLength . . . . . . . . . . . . . . . . . . . 5.33 in.Width . . . . . . . . . . . . . . . . . . . . 3.25 in.Depth . . . . . . . . . . . . . . . . . . . 2.45 in.

Compact Primary Switched-Mode Power Supply UnitsQUINT Series

The QUINT series power supplies are industrial single voltage types with primary switched-mode regulator tech-nology and power factor correction option. This technology means the units are lightweight and operate with ahigh level of efficiency. They are suitable for supplying power to electrical and electronic components in sys-tems throughout automation engineering, plant constructions, process engineering, machine building and con-troller production. Connections to and from the supplies are made with COMBICON connectors for wiring ease.

The output is electronically protected against overload and short circuits. Output characteristics of 1, 2.5 and5A units: The units can be overloaded for approximately 80 ms without switching off. After this, the units switchoff and attempt to switch back on after approximately 1 second. This process repeats itself until the short cir-cuit on the secondary side has been eliminated. Output characteristics of 10, 20, 30 and 40A units: Theunit cuts back the voltage if the current limit is exceeded by 10% of the nominal current and remains constantat this level. This ensures that down-circuit fuses are blown selectively.

Surge Voltage Protection: varistor. Housing: steel plate, sealed: sides ABS UL94V0. Function Display :LED. Color: green. Mounting: 35 mm wide DIN-rails.

1/25/5/10 A Models 20/30/40 A Models

V D C

24

A m p s1

2.52.5551010

20

30

40

P o w e rF a c t o r

0.60.60.70.60.70.650.750.40.80.40.80.40.70.40.70.40.70.40.7

O u t p u tI n p u t

24-12

O u t p u t24-1224-1224-1224-1224-1224-1024-10

24-10

20-6

20-6

AW G

The MCR-C-UI-UI-DCI modules are used forisolation and conversion of analog signals.Primary applications are to provide groundloop isolation and to convert one analog sig-nal to another.

The Universal Isolator/Converter requires aDC supply voltage of between 18 and 30volts. A green LED on the top of the moduleindicates when power is applied. A 24V DC650mA power supply, part number MCR-PS-120AC/24DC/650, is available in the samehousing shape (call Carlton-Bates for detailsand ordering information).

Two sealed potentiometers on top allowzero/span adjustments. The unique housing provides easy access to the uni-versal DIP switches, which allow you to change the inputs and outputs so thatmore than 200 signal variations are possible. The module snaps onto 35 mmwide DIN-rails. The signal and power lines are securely connected to the mod-ules via removable COMBICON connections. Approvals: UL Recognized(U.S. and Canada), Class 1, Div. 2, CE. Dimensions: (Lx H x W): 99 x 114.5x 17.5 mm. Max. Input: 30 V or 50 mA. Max. Output: 15 V or 30 mA.

Instrumentation ProductsUniversal Isolator/Converter

Configuration via DIPswitch


MCR-C-UI-UI-DCI... 2810913 275.00

E a c h

Selectable*


24-14

AW G

*The modules will be delivered with these “standard” settings: 0-10 V/0-10 V(input/output). The user then has the option of changing the setting (via the DIPswitches) to suit system requirements. Call if more details are required.

This loop powered isolator is used when anactive or powered PLC card must interface to a4-wire transmitter. It provides signal conversion,amplification and filtering. On the output side ofthe isolator, the 4-20 mA loop provides powerfor the module which then provides isolationand signal conversion. Two zero/span poten-tiometers on top allow fine adjustment of + 2 %.The signal and power lines are securely con-nected to the module via removable COMBI-CON connectors. The MCR loop-powered iso-lator is particularly suitable for the electrical iso-lation of active PLC input cards from theprocess peripherals. A p p r o v a l s: CE.

Dimensions: (Lx H x W): 99 x 114.5x 17.5 mm. Mounting: 35 mm wide DIN-rails.

MCR Loop-Powered Isolator with Selectable Input


MCR-CLP-UI-I-4 2814058 230.00

E a c h

Selectable*/4-20 mA


24-14

AW G

*The modules will be delivered with the “standard” settings: 4-20 mA/4-20 mA(input/output). The user then has the option of changing the input settings (viathe DIPswitches) to suit system requirements. Call if more details are required.

With these MCR (passive) loop-powered isola-tors, a standard signal of 0 (4) - 20 mA can beisolated and filtered in one module. Since theisolator requires no external power, installationtime and cost is greatly reduced. These compo-nents guarantee potential separation betweenthe control electronics and process peripherals.

In addition, EMI/RFI interference is suppressed. These modules snap onto 35mm wide DIN-rails and are available in 1, 2 and 4-channel versions.Dimensions: 99 x 114.5 x 12.5 mm (1 and 2 channel models), 99 x 114.5 x 22.5mm (4-channel model). Max.Input: 30 V, 120 mA. Color: green. Approvals:CE.

MCR Loop-Powered Isolator

MCR...CLP-1/1-00


MCR-1CLP-I/I-00MCR-2CLP-I/I-00MCR-4CLP-I/I-00

281401628140292814045

200.00365.00645.00

E a c h

0 (4) - 20 mA


1-channel2-channel4-channel

O u t p u tS i g n a l

l With analog signal isolationl No additional supplyl CE Mark

The programmable MCR-T module convertsand isolates temperature signals from resis-tance thermometers (RTDs), thermocouplesand sensors with linear mV characteristicsinto standard industrial analog signals. Themodule, which has an electronic switchingPNP transistor output (100 mA/24V), is facto-ry-configured for thermocouple sensors andRTDs in 2, 3, or 4-wire systems. The config-uration, (which includes characteristic curveconnection system, lower and upper mea-surement ranges, unit of measure and out-put). must be specified when ordering. Theoutput options are 0-20 mA, 4-20 mA, 0-5 V,0-10V, + 5 V or +10 V. Call Carlton-Bates for

complete ordering information. A p p r o v a l s: CE, UL, Class 1, Div. 2.Dimensions: (L x H x W): 99 x 114.5 x 17.5 mm. Mounting: 35 mm wideDIN-rails.

MCR Programmable Temperature Transducers forRTDs and Thermocouples

MCR-T-UI/


MCR-T-UI-E 2814113 299.00

E a c h

Specify

C o n f i g u r a t i o n

24-14

AW G

These modules convert signals from PT-100 RTD sensors and Type J or K thermocouples into electrically standardized analogsignals. They are connected via insertable COMBICON plugs and include two zero/span potentiometers on top for fine adjust-ment of + 5%. 2, 3 or 4-conductor connections, sensor type, cold points (thermocouples), temperature ranges and output signalsare selectable via DIP switches. The desired settings can be indicated when ordering (call Carlton-Bates for ordering informa-tion). If the desired setting are not provided, the modules will be supplied with the “standard” settings shown below. Approvals:CE. Dimensions (Lx H x W): 99 x 114.5 x 17.5 mm. Mounting: 35 mm wide DIN-rails. AWG: 24-14

MCR Temperature Transducers

MCR-PT-100-


MCR-PT-100-U/...MCR-PT-100-I/...MCR-PT-100-U/DC/...MCR-PT-100-I/DC/...

MCR-TE-JK-U/...MCR-TE-JK-I/...MCR-TE-JK-U-E/...MCR-TE-JK-I-E/...

2810340281035328103112810337

2810531281054428105152810528

180.00180.00227.00227.00

E a c h

For PT-100, 2, 3, 4-conductor technologyFor PT-100, 2, 3, 4-conductor technologyAs above, except auxiliary power galvanically isolatedAs above, except auxiliary power galvanically isolated

For thermocouples type J, KFor thermocouples type J, kAs above except with isolated inputAs above except with isolated input


3-conductor, 0-100oC,

Type K, 0-1000oC,

Standard Settings

Dip Switch Selectable

0-10 V output4-20 mAoutput0-10 V output4-20 mAoutput

0-10 V output4-20 mAoutput0-10 V output4-20 mAoutput

200.00200.00270.00270.00

Industrial data conversion needs industrial, not office grade converters. These isolators and converters feature 2000V elec-trical isolation and surge suppression, built in as standard. The modules are DIN-rail mountable and require 24VDC power.Cable shielding is maintained and removeable wire terminal blocks reduce installation time. DIPswitches allow customiza-tion for specific applications. Approvals: CE, UL, Class 1. Div. 2. Dimensions (LxHxW): 99x119x22.5mm.

Instrumentation ProductsData Interface Converters and Isolators

M f r. ’s Ty p e Order N o .

SUBCON 9/F-SHSUBCON 9/M-SHSUBCON 15/F-SHSUBCON15/M-SHSUBCON 25/F-SHSUBCON 25/M-SHSUBCON PLUS PROFIB

2761499276150927615962761606276161927616222744348

41.0041.0045.0045.0050.0050.0035.00

E a c h

9-pin female9-pin male15-pin female15-pin male25-pin female25-pin malePROFIBUS


PSM-ME-RS485/RS485-PPSM-ME-RS232/RS232-PPSM-ME-RS485/TTY-PPSM-ME-RS232/RS485-P

2744429274446127444582744416

330.00300.00300.00300.00

E a c h

RS485 repeater for MODBUS, PROFIBUS and othersIsolator for RS232 systemsConvertor for RS 232 to TTY protocolConvertor for RS 232 to RS485 equipment


The SUBCON D-SUB connectors(with screw connection) can be con-nected quickly and conveniently in thefield without soldering or crimpingtools. The plug-in contacts are con-nected to clearly numbered screw ter-minals blocks. The 9-position versionis especially suited to INTERBUS and

a special version with terminating resistor is avail-able for PROFIBUS. Both male and female con-nectors are available in 9, 15 and 25-pin versions.AWG: 26-16

SUBCON Field Bus Connectors


44.5

44.5

49.5

44.0

Dimensions (mm)A

36.0

44.3

58.0

36.0

B

56.4

64.7

78.7

60.0

CM f r. ’s Ty p e Order

N o .

FLKM-I/OFLKM-2-I/OFLKM-4-I/O

228207522820882282091

18.0028.0052.00

E a c h

Module for 1-relayModule for 2-relaysModule for 4-relays

These modules allow for DIN-railmounting of standard solid staterelays in a high density, self-con-tained package. The screw terminalblocks on both sides of the modulecan hold a wide range of conductorsizes (AWG 26-14). It is available forscrew-down mounting of 1, 2 or 4relays. A fuse and indicator for eachrelay is located on the base. Therelays are ordered separately. CallCarlton-Bates for details. Rating:250 VDC, 5 A. Dimensions (Lx H):77 x 40.6 mm.

Varioface Modules for Solid-State Relays

D e s c r i p t i o n Width (mm)

45.067.5135.0

Varioface Modules for Interface Relays

Interface relays are used in industrial applications where low-capacity input control signals control high-capacityoutput signals. The two-position changeover version allows a load resistor to be switched with one single controlsignal. The DC versions are provided with an LED status indicator and contain a damping diode to protect thecontrol circuit. With the AC versions, the switching status is indicated with a glow lamp and does not have a damp-ing diode. The relay supplied with the units is SPDT, hermetically encapsulated with 10 A contacts. AWG: 26-14.Rating: determined by the relay. Mounting: 35 mm wide DIN-rail.


UMK22-REL 24/21-STUMK22-REL 120/21-STUMK22-REL24/21-21-STUMK22-REL 120/21-21-ST

5520695552070555207345520721

27.0035.0035.0041.00

E a c h

Single position change-over switch, w/light indicator and damping diodeAs above, except with glow lamp, without damping diodeTwo-position change-over switch, w/light indicator and damping diodeAs above, except with glow lamp, without damping diode

D e s c r i p t i o nInput Vo l t s

1800

Alessandro Volta develops the battery, the first source of continuous electric current. It consisted of a number of copper and zinc discs arranged alternately in a vertical stack, separated by paper moistened in acid.

The practical unit of potential difference, the volt, is named for Volta.

WIRE STRIPLENGTH 8MM (.03”)

22mm.87”

77mm.3.03”

50mm1.97”

24 VDC120 VAC24 VDC120 VAC

Call for quantity pricing!

Instrumentation Products

The MAINS-MODUTRAB mounts on standard DIN-rails and interfaces with terminal blocks to provide surge voltage pro-tection for single-phase power supplies. Features a thermal detection device, which disconnects the protection path fromthe power supply in the event of varistors overheating. Includes two indicator lamps: green monitors input voltage: red indi-cates power to the source has been disconnected. Black, enclosed housing is rated IP20. Also available without light indi-cators (MT...OLA).

PLC Protector MAINS-MODUTRAB

Mfr.’s Type Order No. EachAWG

With light indicatorsMT-2PE/S-24ACMT-2PE/S-60ACMT-2PE/S-120ACMT-2PE/S-230ACWithout light indicators

MT-2PE/S-120AC-OLAMT-2PE/S-230AC-OLA

2748072274808527889352798802

17889482788757

Input Voltage

24V AC/DC60 V AC/DC120 V AC/DC230 V AC/DC

120 V AC/DC230 V AC/DC

24-12

24-12

90.0090.0096.0096.00

75.0075.00

TERMITRAB provides 3 stage protection (diode, MOV, gas tube) for 24 VDC signals. The narrow 6.2mm housing provideshigh density protection and is rated for 5000 amps of 8 x 20 Msecond surge current. The analog model protects one loopwhile the digital model protects two digital signals. Grounding is accomplished via a metal grounding foot. IP20 housing,accepts wire sizes 24 AWG to18 AWG, CE approved.

24 VDC I/O Signal Protection TERMITRAB

Mfr.’s Type Order No. Each

TT-2PE-24DCTT-2/2-24DC

28381862838173

Description

Analog (4-20mA, 0-10 VDC)Digital signal protection

74.0079.15

Phoenix Surge Voltage Protection TRABTECH (Transient Absorption Technology)

— The All-round Protection Concept

- Lightning Current Arresters and Mains Surge Voltage Protection

- Surge Voltage Protection Analog Digital I/O

- Surge Voltage Protection for Data Interfaces

- Telecommunication Protection- Testers

- Surge Voltage Protection for Special Applications

- Material for Equipotential Bondingand TRABTECH Housings

Housing width: 50 mm

Surge Protection for Conduit Systems SURGETRABThe surge protector SURGETRAB-S-PT1-2PE-24DC is designed specifically for installation in conduit systems. The protective circuit is on a small PCB housed

inside a 4.72” long pipe with two 3/4” threaded ends. The pipe has a screw cover on one end, and, with a T-adapter, this device can be integrated into any conduit system. The 2-stage protective circuit provides protectionfor conductor pairs in floating signal circuits. A powerful gas-filled 3-electrode surge arrester and a low limitingdiode are decoupled by resistors, providing both fine and coarse protection. Two terminal blocks on the PCBclearly marked “IN” and “OUT” provide secure connections. The PCB grounding wire is connected to a washeron one end of the pipe. The ground is completed when the pipe screw cover is tightened. Nominal voltage: 24VDC. Max. voltage: 28 VDC. Nominal Current: 250 mA. AWG: 26-16. Max. response time: normal mode,1 ns: common mode, 100ns.

Mfr.’s Type Order No. Each

S-PT1-2PE-24DCS-PT1-2PE-24DC/P

28181222818216

Description

Pipe stub w/integrated PCBPCB only without pipe stub

85.0048.00

PLUSCON MODULAR PLUG CONNECTORSVARICON is a range of modular plug connectors designed for industrial applications.Each connector set consists of the following components: either a plastic or metalhood, hood frame, panel mounting frame, panel mounting flanges, marker tag andshield adapter (for EMC series). The modular contact inserts must be ordered sepa-rately and are listed below.

Three series, with four housing sizes each are available, and feature IP 65-IP 69Kprotection, and can be either PCB or panel mounted. The plastic housings are madeof high-impact industrial plastic and can withstand most mechanical and chemicalinfluences. The corrosion resistant metal housings are made of tin and copper-plat-ed zinc die casts. The hoods of all the series have the same shape and dimensions.Two screws ensure a tight connection. Optional glands are listed below.

VARIOCON Series Connector Sets

Mfr.’s TypeOrder

No.EachDescription

VC-K-KV-PG16 (4-6.5)VC-K-KV-PG16 (5-8)VC-K-KV-PG16 (6.5-9.5)VC-K-KV-PG16 (7-10.5)VC-K-KV-PG16 (9-13)VC-K-KV-PG16 (11.5-15.5)VC-K-KV-PG21 (7-10.5)VC-K-KV-PG21 (9-13)VC-K-KV-PG21 (11.5-15.5)VC-K-KV-PG21 (14-18)VC-K-KV-PG21 (17-20.5)VC-M-KV-PG16 (4-6.5)VC-M-KV-PG16 (5-8)VC-M-KV-PG16 (6.5-9.5)VC-M-KV-PG16 (7-10.5)VC-M-KV-PG16 (9-13)VC-M-KV-PG16 (11.5-15.5)

18544591853735185374818537511853764185484418538901853900185391318539261853939185394218539551953968185397118539841854857

Cable Dia.(mm)4-6.55-8

6.5-9.57-10.59-13

11.5-15.57-10.59-13

11.5-15.514-18

17-20.54-6.55-8

6.5-9.57-10.59-13

11.5-15.5

Plastic seriesfor size 1hoods

Plastic seriesfor sizes 2-4hoods

Metal seriesfor size 1hoods

3.19

5.25

4.18

Mfr.’s TypeOrder

No.

VC-K1/2M-SETVC-K2/3M-SETVC-K3/4M-SETVC-K4/5M-SETVC-M1/2M-SETVC-M2/3M-SETVC-M3/4M-SETVC-M4/5M-SETVC-EMV1/2M-SETVC-EMV2/3M-SETVC-EMV3/4M-SETVC-EMV4/5M-SET

185411618541451854187185422618542681854284185378018543101854336185435218543781854381

Hood Size

123412341234

Description

Connector set, plastic series

Connector set, metal series

Connector set, metal, shielded EMC series

For Number ofModules

234523452345

Each

20.5922.8324.6327.7934.5739.5141.4546.1337.9043.6946.2952.06

Hood Dimensions (mm)

73.372.279.376.373.372.279.376.373.372.279.376.3

64.864.874.975.064.864.874.975.064.864.874.975.0

597489

104597489104597489104

668196111668196111668196111

A B C D

VC-K...-SET Dimensional drawing of hood

Modular Contact Inserts

Fig. 1Contact Inserts for Plugs

Fig. 2Contact Inserts for Mating Side

These modular contact inserts are based on proven COMBICON technology and are availablein three versions. The inserts for the plug connector sets above snap into the mounting frameand can be inserted quickly into the hood. They feature screw connections and socket contacts.The contact inserts for the mating side feature pin contacts and are available in PCB or panelmount options. The panel mount inserts are like the PCB inserts except they are connected viascrew terminal blocks. All three versions are 15 mm wide and are offered with 2, 6 or 8 posi-tions. The individual contacts can be keyed with optional key tabs, preventing mismating whenseveral connectors are in close proximity. Approvals: ULrecognized (U.S. and Canada).

Mfr.’s Type Order No.

VC-TFS-2VC-TFS-6VC-TFS-8

VC-AML-2VC-AML-6VC-AML-8

VC-AMS-2VC-AMS-6VC-AMS-8

CP-HCC 4

CP-MSTB

185284618534761852820

185285918535311852833

185352818540191854022

1600027

1734634

Fig.

1

2

3

No. of Pos.

268

268

268

Description

Contact insert for plug connector

Contact insert for mating side-PCB mount

Contact insert for mating side-panel mount

Each

3.855.377.23

3.073.836.28

3.415.007.16

5.00/pkg.

5.00/pkg.

Pitch(mm) AWG Rating

7.55.03.5

7.55.03.5

7.55.03.5

24-1028-1628.16

...

...

...

24.1028.1628.16

400V, 20A250V, 8A125V, 8A

400V, 20A250V, 8A125V, 8A

400V, 20A250V, 8A125V, 8A

Keytabs, red, 100 pc. pkg., for all 2-pos. contact inserts

Keytabs, red, 100 pc. pkg., for VC-AM6, VC-AML8, VC-AMS6, VC-AMS8

Cable glands made of plastic, metal and metal/shielded are available. Plasticand metal glands consist of a rubber seal and pressure screw, which alsoserves as a strain relief. The shielded version, used with the EMC series con-nectors, also includes an iris spring and two conical washers, that slip overand contact the braided shielding.

Cable Glands

Mfr.’s TypeOrder

No.EachDescription

V C - M - K V-PG21 (7-10.5)V C - M - K V-PG21 (9-13)V C - M - K V-PG21 (11 . 5 - 1 5 . 5 )V C - M - K V-PG21 (14-18)V C - M - K V-PG21 (17-20.5)V C - E M V- K V-PG16 (6.5-9.5/6.5)V C - E M V- K V-PG16 (7-10.5/8.5)V C - E M V- K V-PG16 (9-13/10.5)V C - E M V- K V-PG21 (9-13/9.5)V C - E M V- K V-PG21 (9-13/12)V C - E M V- K V-PG21 (11 . 5 - 1 5 . 5 / 1 3 . 5 )V C - E M V- K V-PG21 (14-18/14.5)

185399718540061854035185404818540511854132185416118541741854200185421318542421854255

Cable Dia.(mm)

7-10.59-13

11.5-15.514-18

17-20.56.5-9.57-10.59-139-139-13

11.5-15.514-18

Metal seriesfor size 2-4hoods

Metal shield-ed series forsize 1 hoodsMetal shield-ed series forsize 2-4hoods

7.59

16.93

22.55

Note (metal shielded series): The cable shield dia. Is indicated in the partnumber. For example, VC-EMC-KV-PG21 (9-13/12), the /12 indicates a cableshield dia of 12 mm.

Fig. 3

VC-K-KV...

VC-EMV-KV...

VC-M-KV...

PLUSCON Sensor/Actuator Breakout Boxes

The SACB...PUR/SC sensor/actuator boxes are available with 4, 6 or 8 M12 sockets, feature IP67 protection and can be supplied with the standard single-occu-pied sockets or double-occupied sockets, that double the number of sensors that can be connected (when used with the double plugs below). One version comeswith a pre-wired master control cable and another version uses spring cage terminal block connections, allowing the user to quickly assemble a cable as desired.Status LEDs show the operating status of the I/O’s. The smaller SACB-8/... box features 8 M8 sockets per box, IP65 protection and control inputs via either mas-ter cable or a round plug connection. Normal voltage: 24 VDC. Max. operating voltage: 30 VDC. All of the boxes below include marker strips (replacementstrips available). Protective caps are available for unoccupied M 12 sockets.

Sensor/Actuator Breakout Boxes with M 12 or M 8 Sockets


SACB-4/8-L-5.0 PURSACB-4/8-L-10.0 PURSACB-6/12-L-5.0 PURSACB-6/12-L-10.0 PURSACB-8/16-L-5.0 PURSACB-8/16-L-10.0 PURSACB-4/4-L-5.0 PURSACB-4/4-L-10.0 PURSACB-6/6-L-5.0 PURSACB-6/6-L-10.0 PURSACB-8/8-L-5.0 PURSACB-8/8-L-10.0 PURSACB-4/4-L-SCSACB-6/6-L-SCSACB-8/8-L-SCSACB-8/3P-5.0 PUR-M8SACB-8/3P-10.0 PUR-M8SACB-8/4P-5.0 PUR-M8SACB-8/4P-10.0 PUR M8SACB-8/3P-12CON-M8SACB-8/4P-19CON-M8PROT M12ZBN 18:unprintedZB5:unprinted

169507416950871695139169514216951971695207169504516950581695100169511316951681695171167122116712341671247168005016800631680076168008916800921680102168053928091281050004

Description

Sensor/actuator box w/master cable, double-occupied M12 sockets

Sensor/actuator box w/master cable, single-occupied M12 sockets

Sensor/actuator box w/spring cage terminal blocks, single-occupied M12 sockets

Sensor/actuator box w/master cable, single-occupied M8 sockets

Box w/12-pos. plug, single-occupied M8 socketsBox w/19-pos. plug, single-occupied M8 socketsPlastic protective caps for M12 sockets (5-pc. pkg.)10 pc. perforated unprinted marker strip for SACB...PUR/SC boxes10 pc. perforated unprinted marker strips for SACB-8 boxes

No. ofSockets

446688446688468888888

Each

97.76130.66139.10176.72150.40188.00

79.80108.10103.40136.30117.50150.40

57.8273.5087.22

148.96174.44164.64198.94117.60131.32

0.750.780.65

Dimensions (mm)

116.5116.5128.5128.5155.0155.0

8282100100

126.5126.5116.5128.5155.5

77

95

54

54

54

48

48

18.5

18.5

32

25

25

L W H

SACB...SC

Mfr.’s TypeOrder

No. EachNo. ofPins

SACC-M12MS-4CON-PG7-MSACC-M12MS-5CON-PG7-MSACC-M12MS-5CON-PG7SACC-M12MR-5CON-PG7-MSACC-M12MR-5CON-PG7SACC-M12MS-5CON-PG11-DUOSACC-M12FS-5CON-PG7SACC-M12FS-5CON-PG7-MSACC-M12FR-5CON-PG7

166252816631161662256166312916622691662285166229816629681662308

Description

Plug, straight

Plug, angled

Double-plugSocket, straight

Socket, angled

455555555

9.6812.0311.6612.0311.6613.5411.6612.0311.66

SACB...PUR

Sensor/actuator boxes with M 12 slots

1 + 24 VDC2 input/output A3 0V 4 input/output B5 PE

Pin assignment of the slots

SACB-8/...CON-M8SACB-8/...PUR-M8

Sensor/actuator boxes with M 8 slots

No. ofPins

5

5

5

334434

CableLength

5m10m5m10m5m

10m5m

10m5m

10m5m

10m---------5m

10m5m5m------

M 12 Sensor/Actuator Plugs and Sockets

M 12 plugs M 12 sockets

4-position

5-position

These plastic connectors offer IP67 protection. Thedouble plug can be used with the double-occupiedsockets on the boxes above, as 2 initiater cablescan be inserted via the PG11 cable gland. Nominalvoltage: 30 VAC, 36 VDC

W/metal knurlW/metal knurlW/plastic knurlW/metal knurlW/plastic knurlstraight w/plastic knurlW/plastic knurlW/metal knurlW/plastic knurl

SACB...Q...PUR SACB...Q...SC

These boxes have the same features as the ones listed above except they feature the QUICKON quickconnection system. Simply remove the cable sheath (approx. 15 mm), slide on the union nut, the cap andrubber seal, insert the conductor ends into the feed though of the splice ring (labeled 1, 2, 3 and 4) andcut off the projecting ends. Next, insert the splice ring into the contact carrier and tighten the union nutthat creates the contact and strain relief when tightened, without any extra tools or stripping of the conduc-tors. Protective caps are available for unused sockets. Marker strips ZBN 18: unprinted are included.Protection type: IP67. Nominal/max. voltage: 24/30 VDC.

Sensor/Actuator Boxes with Quick Connection System Quickon


SACB-4Q/4P-L-5.0 PURSACB-4Q/4P-L-10.0 PURSACB-6Q/4P-L-5.0 PURSACB-6Q/4P-L-10.0 PURSACB-8Q/4P-L-5.0 PURSACB-8Q/4P-L-10.0 PURSACB-4Q/4P-L-SCSACB-6Q/4P-L-SCSACB-8Q/4P-L-SCQPROT

1695223169523616952521695265169528116952941662939166294216629551670222

Description

Sensor/actuator box w/master cable, 4-position QUICKON connections

Sensor/actuator box w/spring cage terminal blocks and 4-position QUICKON connections

Plastic protective caps for QC sockets (10 pc. pkg.)

No. ofSockets

446688468

Each

95.88128.78124.08156.98141.00173.0065.5888.20

104.6624.40

Dimensions (mm)

9797

134134170170132168205

60

60

44

44

L W HNo. ofPins

4

4

CableLength

5 mm10 mm5 mm

10 mm5 mm

10 mm.........

3-pos. socket12-pos. plug connection

4-pos. socket19-pos. plug connection

Interbus

The INTERBUS ST (Smart Terminal Block) family ofproducts is a compact class of I/O modules that commu-nicates over an INTERBUS sensor/actuator network.Components and assemblies that make up the moduleare identified in Figure 1. The three main structural com-ponents are the DIN-rail mounted base terminal blockunit, pluggable electronics module and the STlocal buscable assembly. The base terminal block unit containsthe wire-clamp assemblies, connectors and fuses. Theelectronics module contains all the actual circuitry.

INTERBUS ST

Mfr.’s Type &Order No. Description I/O Data

Features of the INTERBUS ST Module

Bus Terminal Modules - Copper and Fiber Optic

Analog Input Modules

IBS ST 24 BKM-T2750154

IBS ST 24 BK-T 2754341

IBS ST 24 BK RB-T2753504

IBS ST 24 BK LB-T2753232

IBS ST 24 BK DIO 8/8/3-T2752411

IBS ST 24 BKM-LK2750963

IBS ST 24 BK-LK2754435

IBS ST 24BK DIO 8/8/3-LK2751218

IBS ST 24 BK RB-T DIO 8/8/3-LK2723453

IBS ST 24 BK RB-LK DIO 8/8/3-LK2721662

Bus Terminal Module with fixed electronics: copper remote bus,COMBICON remote bus connection.Bus Terminal Module: copper remote bus, 9-pin D-Sub remote busconnection.

Bus Terminal Module: copper remote bus, 9-pin D-Sub remote bus connection, plus an additional 15-pin D-Sub local bus connection.Bus Terminal Module with I/O: copper remote bus, 9-pin D-Sub remote bus connection, FLK connection.Bus Terminal Module with fixed electronics: fiber optic remote bus, FSMAremote bus connection.Bus Terminal Module: fiber optic remote bus, FSMAremote bus connection.Bus Terminal Module with I/O: fiber optic remote bus, FSMAremote bus connection, FLK connection.Bus Terminal Module with I/O: fiber optic remote bus, FSMAremote bus connection, 9-pin branch remote bus connection, FLK connection.Bus Terminal Module with I/O: fiber optic remote bus, FSMAremotebus connection, FSMAbranch remote bus connection, FLK connec-tion.

Bus Terminal Module: copper remote bus, 9-pin D-Sub remote busconnection, 9-pin branch remote bus connection.

Not Applicable

Not applicable

Not Applicable

Not Applicable

8 inputs: 24 VDC, 5 mA, 1ms filter.8 outputs: 24 VDC, 0.5 A.

Not Applicable

Not Applicable

8 inputs: 24 VDC, 5 mA, 1ms filter.8 outputs: 24 VDC, 0.5 A.

8 inputs: VDC, 5 mA, 3 ms filter8 outputs: 24 VDC, 0.5 A.

8 inputs: 24 VDC, 5 mA, 3 ms filter.8 outputs: 24 VDC, 0.5 A.

Configurable per channel. Voltage ranges: 0 to +5 VDC, 0 to +10 VDC, 0 to +25 VDC, 0 to +50 VDC, 8- or 12- bit resolution modes (39 or 2.44 mV/step).

Voltages range: 0 to +10 VDC (2.44 mV/step).Current ranges: 0 to +20 mA(4.88 µA/step), +4 to +20 m A (3.91 µA/step). 12-bit resolution.

Voltage range: 0 to +10 VDC (2.44 mV/step).Current ranges: 0 to +20 mA(4.88 µA/step). 12-bit r e s o l u t i o n .

Voltage range: 0 to +10 VDC (4.88 mV/step).Current ranges: +4 to +20 mA(3.91µA/step). 12-bit r e s o l u t i o n .

Voltage range: -10 to +10 VDC (4.88 mV/step).Current ranges: -20 to +20 mA(9.75 µA/step). 12- bit r e s o l u t i o n .

Voltage range: -10 to +10 VDC (4.88 mV/step).Current ranges: +4 to +20 mA(7.81 µA/step). 12- bit r e s o l u t i o n .

Configurable per channel. Voltage: 0 to +10 VDC(2.44 mV/step). Current: 0 to +20 mA(4.88 µA/step),+4 to +20 mA(3.91 µA/step). 12- bit resolution.

Configurable per channel. Current ranges: 0 to +20 mA, +4 to +20 mA, 0 to +40 mA, 0 to +60 mA, 8-bit (62.7 µA/step) or 12- bit (3.9 µA/step) resolution.

Measuring range: -273.1 to +3276.7oC or -459.6 to + 3 2 7 6 . 7oF. 16-bit resolution: 0.1oC or 0.1 K forCelsius, 0.1oF or 0.056 K for Fahrenheit.

J- or K-type thermocouples. 16-bit resolution.

Configurable per channel. Voltage ranges: 0 to +100, 0 to +200, 0 to +500 mVDC. Also 0 to +1 VDC. Resolution: 8- or 12- bit (781.25 or 48.83 µV/step).

Analog Input Module: 24 VDC, 8 voltage inputs (single ended).

Analog Input Module: 24 VDC, 2 voltage or current inputs (differential).


Analog Input Module: 24 VDC, 4 voltage or current inputs(differential).

Analog Input Module: 24 VDC, 2 voltage or current inputs(differential).


Analog Input Module: 24 VDC, 4 voltage or current inputs (differential and isolated per channel).

Analog Input Module: 24 VDC, 8 current inputs (single ended).

Analog Input Module: 24 VDC, 4 RTD inputs.

Analog Input Module: 24 VDC, 8 thermocouple inputs.

Analog Input Module: 24 VDC, 8 voltage inputs (single ended).

IB ST 24 BAI 8/U2721015

IB ST 24 BAI 2/SF2722771

IB ST 24 AI 4/SF2754309

IB ST 24 AI 4/SF42750565

IB ST 24 BAI 2/BP2725888

IB ST 24 AI 4/BP2751564

IB ST 24 AI 4/I2719629

IB ST 24 BAI 8/I2721028

IB ST 24 PT 100 4/42752767

IB ST 24 UTH 82724902

IB ST 24 BAI 8/U-MV2724986

Wire Entry Hole (typical)

DIN-rail (not supplied)

Access Hole for Wire Clamp Screw (typical)

ST Local Bus CableLocking Clips (typical both sides)

Keying Tab (typical)

Positive Latch

Diagnostics LED Bank(red & green)

ModuleIdentification

Status LED Bank (amber)

PluggableElectronic Module0823A002

Pullout MarkingFieldST Local Bus

Cable Assembly

Base Terminal Block Unit

DIN-Rail Release Tab

ST Local Bus CableStorage Area (typi-cal both sides)

Metal Grounding Strap

Insertion Bridge Bar Groove

Optional Wire TerminationMarkers (typical)

(Continued on

Fig. 1

Process understanding is the key to choosing the correct I/O modules. TheST table below is organized to help you find the modules that meet your con-trol needs. After choosing those modules that meet your current and futurerequirements, you will have to determine the complimentary products andaccessories needed to complete your system. A list of accessories is providedwith each module data sheet. Data sheets are available for most modules andmay be obtained through Phoenix Contact’s FAX-ON-DEMAND system (800-944-9901) or calling Carlton-Bates. Connection Data:AWG 24-12.Operating Temperature: 0 to +55 o C. Wide temperature range modules (-20o

to +55o C) are available upon request.

Features Power Requirements Local BusCurrent

Slim design. Network connectors included. Supports up to four ST local bus I/Omodules (observe local bus current capacity).Alarm output. Reconfiguration input. Supports up to eight ST local bus I/O modules(observe local bus current capacity).Alarm output. Reconfiguration input. Supports up to eight STlocal bus I/O modules(observe local bus current capacity). Provides two remote bus outputs.Alarm output. Reconfiguration input. Supports up to eight STor Flat Pack local busI/O modules (observe local bus current capacity).Reconfiguration input. Supports up to four ST local bus I/O modules (observe localbus current capacity). Accepts two- and three-wire I/O devices.Slim design. Supports up to four STlocal bus I/O modules (observe local bus currentcapacity). Electrical isolation between communication and supply voltage.Alarm output. Reconfiguration input. Supports up to eight STlocal bus I/O modules(observe local bus current capacity),Reconfiguration input. Supports up to four ST local bus I/O modules (observe localbus current capacity). Accepts two- and three-wire I/O devices.

Reconfiguration input. Supports up to four ST local bus I/O modules (observe localbus current capacity). Accepts two- and three-wire devices. Provides two remote busoutputs.Reconfiguration input. Supports up to four ST local bus I/O modules (observe localbus current capacity). Accepts two-and three-wire I/O devices. Provides two remotebus outputs.

24 VDC350 mAmax.24 VDC650 mAmax.

24 VDC650 mAmax.24 VDC450 mAmax.24 VDC300 mAmax.24 VDC350 mAmax.24 VDC450 mAmax.

24 VDC500 mAmax.

24 VDC500 mAmax.

24 VDC650 mAmax.

500 mAmax.supply800 mAmax.supply800 mAmax.supply800 mAmax.supply500 mAmax.supply500 mAmax.supply800 mAmax.supply500 mAmax.supply

500 mAmax.supply

500 mAmax.supply

135 mAmax.draw

140 mAmax.draw

150 mAmax.draw

150 mAmax.draw

140 mAmax.draw

150 mAmax.draw

100 mAmax.draw

150 mAmax.draw

100 mAmax.draw

150 mAmax.draw

135 mAmax.draw

24 VDC68 mAtyp. (no passive sensors)160 mAtyp. (at max. load)

24 VDC



24 VDC


24 VDC80 mAmax.

24 VDC68 mAtyp. (no passive sensors)160 mA(at max. load)

24 VDC65 mAmax.

24 VDC65 mAmax.


Process data update time: 350 µs/channel. Fault indication: failure of +24 V I/O sup-ply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.

Process data update time: 0.55 ms/channel.

Process data update time: .075 ms/channel. Fault indication: failure of +24 V I/O sup-ply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.

Process data update time: 0.75 ms/channel. Fault indication: failure of +24 V I/O sup-ply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.

Process data update time: 0.55 ms/channel.

Process data update time: 1 ms/channel. Fault indication: failure of +24 V I/Osupply voltage, failure of +15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.



Process data update time: 258 ms/channel.

Process data update time: 3 s/channel.

Process data update time: 350 µs/channel. Fault indication: failure of +24 V I/O sup-ply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.

ModulesModule Family

• Electronics packaged in a removable modulePullout marking field for channel identification on most modules

• Optional wire termination markers available.

• Screw-clamp terminations for bothmodule power and I/O power.Spring-clamp terminations are available for most modules upon request.

• Electrical isolation• IP20 housing rating

• I/O modules accept 2, 3- or 4-wireI/O devices, depending on moduletype

• I/O modules have from 2 to 32 I/Opoints depending on module type.

• Each local bus can support up to 256 I/O points

• Each local bus can support both digital and analog signals

• Diagnostic and status LEDs on each module

• Module diagnostics over INTER-BUS network.

DimensionsW x H x D

118 x 116 x 117(mm

81 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

81 x 116 x 117(mm)

118 x 116x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

Each

44 x 116 x 117(mm)

81 x 116 x 117(mm)

81 x 116 x 117(mm)

81 x 116 x 117(mm)

118 x 116 x 117(mm)

44 x 116 x 117(mm)

81 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

next page)

Features

190.00

340.00

550.00

550.00

680.00

680.00

298.00

430.50

798.00

980.00

825.00

450.00

820.00

815.00

450.00

925.00

1110.00

830.00

780.00

1000.00

1250.00

InterbusINTERBUS ST

Mfr.’s Type &Order No.

Description I/O Data

Digital Input ModulesIB ST 24 DI 32/2

2754927IB ST 24 BDI 8/4

2750808IB ST 24 BDI 16/4

2750170IB ST 24 DI 16/4

2754338IB ST 48 DI 16/2

2721109IB ST 120 DI 16/3

2719276IB ST 230 DI 16/3

2721099

Digital Input Module: 24 VDC, 32 inputs. Accepts two-wire I/Odevices.Digital Input Module: 24 VDC, 8 inputs. Accepts two-, three-, andfour- wire I/O devices.

Digital Input Module: 24 VDC, 16 inputs. Accepts two-, three-, andfour- wire I/O devicesDigital Input Module: 48 VDC, 16 inputs. Accepts two- wire I/Odevices.Digital Input Module: 120 VAC, 16 inputs. Accepts two- and three-wire I/O devices.Digital Input Module: 230 VAC, 16 inputs. Accepts two- and three-wire I/O devices.

Digital Input Module: 24 VDC, 16 inputs. Accepts two-, three-, andfour- wire I/O devices.

32 inputs, 24 VDC, 5 mA, 3ms filter

8 inputs, 24 VDC, 6 mA, 0 ms filter




16 inputs, 120 VAC, 4.8 mA, 30 ms filter

16 inputs, 230 VAC, 7 mA, 30 ms filter

IB ST 24 DIO 8/8/3-2A2753708

IB ST 24 DIO 8/8/3-2A-S2753449

IB ST 24 DIO 8/8R/32751849

Digital Input/Output Module: 24 VDC, 8 inputs, 8 outputs. Acceptsthree-wire I/O devices.Digital Input/Output Module: 24 VDC, 8 inputs, 8 outputs with outputlogic control. Accepts three- wire I/O devices.Digital Input/Output Module: 24 VDC, 8 inputs, 8 relay outputs(SPDT). Accepts three- wire I/O devices.

8 inputs: 24 VDC, 5 mA, 3 ms filter.8 outputs: 24 VDC, 2.0 A.8 inputs: 24 VDC, 5 mA, 3 ms filter.8 outputs: 24 VDC, 2.0 A.8 inputs: 24 VDC, 5 mA, 3 ms filter.8 relay outputs (SPDT): up to 230 VAC and 3.0 A.

Digital Input and Output Modules

Digital Output ModulesIB ST 24 BDO 32/2

2750824IB ST 24 DO 32/2

2754325IB ST 24 BDO 8/3

2750811IB ST 24 BDO 16/3-250

2750167IB ST 24 BDO 16/3-500

2724931IB ST 24 DO 16/3

2754914IB ST 24 DO 16 R/S

2721112

Digital Output Module: 24 VDC, 32 outputs. Accepts two- wire I/Odevices.Digital Output Module: 24 VDC, 32 outputs. Accepts two- wire I/Odevices.

Digital Output Module: 24 VDC, 16 outputs. Accepts two- and three-wire I/O devices.Digital Output Module: 24 VDC, 16 outputs. Accepts two- and three-wire I/O devices.Digital Output Module: 24 VDC, 16 outputs. Accepts two- and three-wire I/O devices.Digital Output Module: 24 VDC, 16 relay outputs (SPST). Acceptstwo- and three- wire I/O devices.

Digital Output Module: 24 VDC, 8 outputs. Accepts two- and three-wire I/O devices.

32 outputs: 24 VDC, 0.5 A.






16 relay outputs (SPST): up to 230 VAC and 3.0 A.

IB ST 24 DO 8/3-2A2754891

IB ST 120/230 DO 8/3-1A2719263

Digital Output Module: 24 VDC, 8 outputs. Accepts two- and three-wire I/O devices.Digital Output Module: 120 or 230 VAC, 8 outputs. Accepts two-and three- wire I/O devices.


8 outputs: 120 or 230 VAC, 1.0 A.

IB ST V.242725480

IB ST 24 CNT2750400

IB ST 24 INC/22751975

RS-232/V.24 Communication Module

Counter Modules with 4 Counters

Two-channel Positioning Module

Configurable baud rate (110 to 19200) via PCPchannel. 16- bit resolution, pulse generator .01 to 10 kHz. Measuring range: 0 to 90 kHz (typ), 0 to 300 kHz(with one channel in use).

Incremental encoder inputs: 0 to 25 kHz (24 V sig-nals), 0 to 500 kHz (5V signals). Refer to moduledata sheet no. 0614 for more information.

Special Function modules

Analog Output ModulesIB ST 24 BAO 8/U-8B

2721031IB ST 24 AO 4/BP

2752521IB ST 24 BAO 8/U

2721044

IB ST 24 AO 4/SF2754312

IB ST 24 AO 4/SF42750578

Analog Output Module: 24 VDC, voltage outputs.

Analog Output Module: 24 VDC, 4 voltage outputs.

Analog Output Module: 24 VDC, 4 voltage or current outputs.

Analog Output Module: 24 VDC, 4 voltage or current outputs.

Analog Output Module: 24 VDC, 8 voltage outputs.

Voltage range: 0 to +10 VDC (39 mV/step), 8- bitresolution.Voltage range: -10 to +10 VDC (4.88 mV/step), 12-bit resolutionVoltage range: -10 to +10 VDC (2.44 mV/step) or -12 to +12 VDC (2.93 mV/step). 13- bit resolution.Voltage range: 0 to +10 VDC (2.44 mV/step).Current range: 0 to +20 mA(4.88 µA/step). 12 bit-resolution.

Voltage range: 0 to +10 VDC (2.44 mV/step).Current range: +4 to +20 mA(3.91 µA/step). 12- bitresolution.

ModulesModule Family (continued)

FeaturesPower

Requirements Local Bus Current

One isolated group. Fault indication: failure of +24 V I/O supply voltage

One isolated group. Fault indication: failure of +24 V I/O supply voltage, blown fuse atI/O supply voltageOne isolated group. Fault indication: failure of +24 V I/O supply voltage failure, blownfuse at I/O supply voltageFour isolated groups. Fault indication: failure of +24 V I/O supply voltage, short circuitor overload of initiator supply voltage, over-temperature of an output driver.

One isolated group.

One isolated group.

One isolated group.

24 VDC2.0 A24 VDC200 mA

24 VDC800 mA

48 VDC

120 VAC1.0A

230 VAC

24 VDC1.0A

100 mAmax. draw

50 mA max. draw

100 mAmax. draw

100 mAmax. draw

100 mAmax. draw

100 mAmax. draw

100 mAmax. draw

Fault indication: blown fuse at I/O supply voltage (indicated only is the other fuse inisolated group is OK).Fault indication: blown fuse at I/O supply voltage (indicated only is the other fuse inisolated group is OK).

24 VDC16 A max.24 VDC16 A max.

24 VDC

100 mAmax. draw

100 mAmax. draw

100 mAmax. draw

One isolated group. Electronic over-circuit protection per group of four channels.Fault indication: short circuit or overload of an output.Four isolated groups. Electronic over-circuit protection per point. Fault indication:short circuit or overload of an output, over temperature of an output driver.One isolated group. Electronic over-circuit protection per point. Fault indication: shortcircuit of an output.

One isolated group. Electronic over-circuit protection per group of four channels.

One isolated group. Electronic over-circuit protection per group of four channels.

Four isolated groups. Electronics over-circuit protection per point. Fault indication:short circuit of an output.

Four isolated groups.

24 VDC16 A max.24 VDC8A max.

24 VDC3.2 A max.24 VDC8A max.24 VDC8A max.

24 VDC

24 VDC1.6 A max.

100 mAmax. draw

100 mAmax. draw

50 mAmax. draw

100 mAmax. draw

100 mAmax. draw

100 mAmax. draw

100 mAmax. draw

Two isolated groups. Electronic over-circuit protection per point. Fault indication:short circuit of an output.

Two isolated groups.

24 VDC8A max.120 oe 230 VAC8A max.

100 mAmax. draw

100 mAmax. draw

PCPsupported. 3964 R-mode supported. 4 k byte buffer in send/receive direction.

PCP supported. Refer to module data sheet no. 0615 for further details. Fault indica-tion: failure of +24 V I/O supply voltage, blown fuse at I/O supply voltage.

PCP supported. Refer to module data sheet no. 0614 for further details.

24 VDC400 mAtypical

24 VDC4A max.

24 VDC

130 mAmax. draw

220 mAmax. draw

280 mAmax. draw

Process data uptime: 2.5 ms per channel. Fault indication: failure of +24 V I/O supplyvoltage, failure of a ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.Process data update time: 1 ms per channel. Fault indication: failure of +24 V I/Osupply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.Process data update time: 3 ms per channel. Fault indication: failure of +24 I/O sup-ply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.

Process data update time: 1 ms per channel. Fault indication: failure of +24 I/O sup-ply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.

Process data update time: 1 ms per channel. Fault indication: failure of +24 V I/Osupply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.

24 VDC80 mAmax.24 VDC0.15 A max.

24 VDC0.25 A max.

24 VDC0.25 A max.

24 VDC80 mAmax.

120 mAmax. draw

130 mAmax. draw

120 mAmax. draw

130 mAmax. draw

130 mAmax. draw

Dimensions (W x H x D)

118 x 116 x 117(mm)

81 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

81 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

81 x 116 x 117(mm)

118 x 116 x 117(mm)

44 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

118 x 116 x 117(mm)

Each

525.00

210.00

245.00

320.00

480.00

385.00

480.00

505.00

650.00

400.00

480.00

660.00

270.00

290.00

395.00

360.00

610.00

340.00

400.00

549.00

700.00

1290.00

875.00

825.00

975.00

825.00

825.00

INTERBUS Inline SystemINTERBUS Inline Components

Mfr.’s Type Order No. Description

IBSIL 24BK-T

IBIL 24BK-RB-T

IBIL 24L2

IBIL 24SEGIBIL 24SEG/F

IBIL 24PWRIN

IBIL 24DI2IBIL 24DI4IBIL 24DI8IBIL 24DI16

IBIL 24DO2-2AIBIL 24DO4IBIL 24DO8IBIL 24D016

IBILAI2/SF

IBILAO1/U/SFIBILAO1/SF

IBILTEMP2UTHIBIL TEMP2RTD

2726188

2727941

2724886

27263242727747

2726311

2726201272621427262272726230

2726243272625627262692726272

2726285

27277762726298

27277632726308

INTERBUS Bus terminal, 24 VDC

Remote bus branch terminal, 24 VDC

Loop 2 branch terminal, 24 VDC

Segment terminal, 24 VDC, without fuseSegment terminal, 24 VDC, with 6.3 A fuse

Power terminal, 24 VDC

Digital input terminal, 2-inputs, 24 VDC, 4-wire connection (PNPsensor)Digital input terminal, 4-inputs, 24 VDC, 3-wire connection (PNPsensor)Digital input terminal, 8-inputs, 24 VDC, 4-wire connection (PNPsensor)Digital input terminal, 16-inputs, 24 VDC, 4-wire connection (PNPsensor)

Digital output terminal, 2-outputs, 24 VDC, 2 A, 4-wire connection Digital output terminal, 4-outputs, 24 VDC, 500 mA, 3-wire connection Digital output terminal, 8-outputs, 24 VDC, 500 mA, 4-wire connectionDigital output terminal, 16-outputs, 24 VDC, 500 mA, 3-wire connection

Analog input terminal, 2-inputs, 0 to 20 mA, 4 to 20 mA, -20 to +20 mA, 0to 10 V, -10 to +10 V, 2-wire connection

Analog output terminal, 1 output, 0 to 10 V, 2- wire connectionAnalog output terminal, 1 output, 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2-wireconnection

Thermocouple terminal, 2 inputs, 2- wire connectionRTD terminal, 2 inputs, 2-, 3- or 4- wire connections

Use Connector Type

1

2

4 (4-required)

5 or 65 or 6

5 or 6

3 or 47 or 8

3 or 4 (4-required)7 or 8 (4-required)

3 or 48 or 9

3 or 4 (4-required)8 or 9 (4-required)

2 or 4

2 or 42 or 4

2 or 42 or 4

Each

230.00

150.00

210.10

16.0024.00

18.75

32.0048.5090.00

180.00

68.0064.00

118.00218.00

262.00

145.00168.00

295.00295.00

The information on this page is an overview of the components in an Inline Automation Station. Detailed information is contained in data sheets for the listed ter-minals or in the user manual INTERBUS Inline System Manual (order no. 2743048). Data sheets may be obtained through Phoenix Contact’s FAX-0N-DEMANDSystem (800-944-9901) or by calling Carlton-Bates Company.

The INTERBUS Inline product family is a modular automation system that is integrated into an INTERBUS system. Inline modules are joined together to createfunctional units which meet the requirements of the application. The control cabinet layout is designed by grouping the various I/O modules according to function.Both communication and power routing is accomplished automatically with the physical interconnection between the I/O modules. Additional networking optionspermit the network to branch to either a remote bus segment or Loop 2 segment.

Bus Terminals can accommodate up to 63 modules. A copper cable is used to couple it to INTERBUS, DeviceNet or Profibus networks.A Remote Bus BranchTerminal is used for creating a remote bus branch and can only be inserted directly after the bus terminal. A Loop 2 Branch Terminal is used to extend theInline station via a Loop 2 segment. It is recommended that a Loop 2 branch terminal module be electrically isolated from the other Inline station components viaa power terminal (IRIL24PWRIN). I/O voltage is supplied to the I/O module via the integrated power bus built into each of the I/O modules. Segment Terminalsprovide the ability to segment this I/O power for an individual module or group of I/O modules. Note that the maximum current allowed through the integratedpower bus is 8 amps. The Power Terminals provide power to the I/O circuit and allows electrical isolation. Power Terminals are also used when the current ofthe integrated power bus could exceed 8 amps. Approvals: ULRecognized (U.S. and Canada).

Terminal Modules (connectors must be ordered separately)Width(mm)

48.8

12.2

48.8

12.212.2

12.2

12.212.248.848.8

12.212.248.848.8

12.2

12.224.4

12.212.2


IBILBK-PLSETIBILSCN-6SHIELDIBILSCN-8-CPIBILSCN-8IBILSCN-PWRIN-CPIBILSCN-PWRINIBILSCN-12-ICPIBILSCN-12IBILSCN-12-OCP

IBILFIELD 2IBILFIELD 8

ZBFM6-...

272779227263532727608272633727276372727462272761127263402727624

27275012727515

...

Connector set (4-connectors: 2-shielded,1-standard,1-power, black)I/O shielded connectorI/O standard connector. color coded*I/O standard connector, without color codePower connector, black, color coded*Power connector, black, without color codeI/O extended double signal connector, color coded**I/O extended double signal connector, without color codeI/O extended double signal connector, color coded †

Connector Type

123456789

Each

25.008.504.504.004.504.007.507.007.50

6.0010.00

...

Connectors and Accessories

Labeling field for terminals with 12.2 mm or 24.4 mm widthsLabeling field for terminals with 48.8 mm widths

100 pc. marker sheet, several versions available (to order, see “Accessories for Terminal Blocks”)

*Color codes for standard and power connectors (1st row: w/o color print, 2nd row: red, 3rd row: blue, 4th row: green/yellow). **Color codes for extended -ICPconnectors (1st row: w/o color print (signals), 2nd row: red, 3rd row: blue, 4th row: w/o color print (signals), 5th row: red, 6th row: blue). † Color codes for extend-ed -OCP connectors (1st row: w/o color print (signals), 2nd row: blue, 3rd row: green/yellow, 4th row: w/o color print (signals), 5th row: blue, 6th row: green/yellow).

System diagnostics LEDand status LED

Zach strip labeling

Snap-on labeling field

I/O connector

Potential routing

Communicationspower routing

INTERBUS data routing

C o n n e c t i o nD a t a :s p r i n gclampsAWG: 24-16

Module Height: 71.5 mmLength: 116.1 mm (141.1mmw/extended connector)

Legend1 Bus Terminal2 Remote Bus Branch Terminal3 Segment Terminal4 I/O Modules5 Power Terminal6 Loop 2 Branch Terminal

1 2 3 4 3 4 5 6INTERBUS Inline Station

INTERBUS Loop 2 System


IBSL2IP24BK-TIBL2BOX24PWRINDI4/4-M12

IBIL24L2

IBL2BOX24DI4/4M12

IBL2BOX24DI4/4M12-D

IBL2BOX24DI8/4M12

IBL2BOX24DO4/4M12-2A

IBL2BOX24DO4/4M12-2A-D

IBL2BOX24DIO2/2/4M12-2A

IBL2BOX24DIO2/2/4M12-2A-D

IBL2BOXAI2/2M12

IBL2BOXAO1/2/UM12

IBL2BOXAO1/2/IM12

IBL2BOXTEMP2/2M12

IBL2IP500MLR4-6A

27323762732392

2727886

2731982

2732761

2731995

2732347

2732774

2732004

2732787

2731908

2731940

2731937

2731924

2732389

Bus terminal with Loop 2 branch (data sheet 5880)Power in module w/4 digital inputs, 24 VDC, 4- wire, connection for additional power supply (datasheet 5881)Inline Loop 2 branch terminal, 24 VDC (data sheet 5662)Digital input module, 4- inputs, 24 VDC, 4-wire (data sheet 5870)Same as above with internally cross-wired inputs (data sheet 5989)Digital input module, 8- inputs, 24 VDC, 4- wire (data sheet 5873)Digital output module, 4- outputs, 24 VDC, 2 A, 3- wire (data sheet 5871)Same as above with internally cross-wired outputs (data sheet 5988)Digital I/O module, 2-inputs, 24 VDC, 4- wire; 2- outputs, 24 VDC, 2 A, 3-wire (data sheet 5872)Same as above with internally, cross-wired inputs and outputs (data sheet 5990)Analog input module, 2- inputs, 0-10 VDC, 2-10VDC, 0-20 mA, 4-20 mA, 2- wire (data sheet 5874)Analog output module, 1- output, -10 VDC to +10VDC, 2- wire (data sheet 5877)Analog output module, 1- output, 0-20 mA, 4-20 mA, 2- wire (call for data sheet)Analog input thermocouple/RTD module, 2-inputs,RTD, TC, 2, 3 and 4- conductor sensors, 2- wire (data sheet 5875)Motor starter, machine mounted, 4- channels, 500 VAC, 6 A (call for data sheet)

Each

585.00198.00

210.00

138.00

138.00

198.00

182.00

182.00

174.00

174.00

360.00

290.00

290.00

360.00

1512.00

The information on this page is an overview of the components that make upthe Loop 2 product family. Detailed information is contained in data sheets orin the INTERBUS Loop 2 System Manual (order no. 2743491). Data sheetsmay be obtained from either Phoenix Contact’s Website INLINEIO.com, FAX-ON-DEMAND System (800-944-9901) or by calling Carlton-Bates.

INTERBUS Loop 2 products combine user data signals with power for busdevices and transmit both signals through an unshielded 2-wire cable.Additionally, INTERBUS Loop 2 modules with IP67 protection, can be directlyintegrated into an Inline station by means of a branch terminal. Circuits aredisplayed with built-in diagnostic LED’s and all modules use the solderlessQUICKON connectors, eliminating the need for tools and striping of the con-ductors.

The machine mountable Bus Terminal can support up to 63 devices. In theevent the minimum voltage for a device (19.2V) is not achievable or the maxi-mum current load (1.8 A) is exceeded, the Power In Module should be usedto re-establish these power requirements. The Inline Loop 2 BranchTerminal permits a seamless integration of the Loop 2 product offering into anInline station. Approvals: ULRecognized (U.S. and Canada).

Loop 2 Components

Fig.

12

*

3

3

3

2

2

2

2

4

4

4

4

5

System Parameters

Cable length between 2 devices. . . . .20 m (65.6 ft) max.Cable length in a loop. . . . . . . . . . . . .200 m (656.2 ft) max.Current load in a loop. . . . . . . . . . . . . 1.8 A max.Voltage on a device. . . . . . . . . . . . . . .19.2 V min.Number of devices in a loop. . . . . . . . 63 max.

Legend

1- Loop 22- Loop 2 network cable3- Loop 2 connector set


IBSLSLCCU2/1.5-METER

IBSLPSCCU3/1.5-METER

IBSINBCMETERSABCG/PG9

IBSIPPROTI/OIBSLMLRPLSET4-6A

2721620

2722137

27231361662133

27599192724533

Loop 2 network cable, green, 2-cond., AWG 16 (priced permeter)Loop 2 actuator supply cable, black, 3- cond., AWG 16 (pricedper meter)INTERBUS network with power cable (priced per meter)Cable gland set (PG9), threaded, for INTERBUS connectionson Loop 2 bus terminal (2 pcs./pkg.)Protective caps for unused M12 socketsLoop 2 connector set (includes PG glands) for motor starter

Each

1 . 6 0 / m t r

2 . 3 0 / m t r.

7 . 8 0 / m t r.

5 . 9 5 / m t r.

1.6395.00

Accessories

*not shown. For information on this product see “INTERBUS Inline System”.

Legend1. Bus terminal2. Loop 2 network cable3. Loop 2 actuator supply cable4. Cable gland set ( 2 x PG9)

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Legend1 Field Mountable Bus Terminal2 Machine Mountable I/O Modules

• Analog• Digital• Temperature

3 Machine Mountable MotorStarter

4 Power Distribution Module with Digital Inputs

modular terminal blocks - cesco.comfixed bridge, 10-pos., breakable insertion bridge, 10-pos.,...

Documents