Modular Inverter

Modular Inverter Series UNV 1200VA(960W) 1800VA(1440W) 2500VA(2000W) 3300VA(2640W) 5000VA(4000W)UNV-F1.2 - UNV-F1.8 UNV-F2.5 UNV-F3.3 UNV-F5.0| --------------------------------------------------------- 19 x 3U ------------------------------------------------------------ |Available input voltages of:48V DC60V DC110V DCAvailable output voltages of:230V AC / 50Hz[HF Technology 1st Generation]

Modular Inverter Series UNVUNV-FTechnical informationInput:

Output: 230V, 50 or 60Hz (programmable), single phaseIt is possible to build three phase system, each phase with numbers inverter in parallel.

Max. number of inverter working in parallel: 16 pieces

Modular Inverter Series UNVUNV-FSpecial features>> Electrical isolation between input and output>> Input over/under voltage shutdown>> Hot-plug-in able>> Ready for paralleling (no fixed master) >>Current sharing based on decrease line of max. 1% for the output voltage >> Load balance max +/- 5% INom >> n+x redundancy>> Ability to build three phase systems with a number of inverters per phase>> Output overload and short circuit proof>> Temperature controlled fan cooling (font-to-rear airflow)>> Digital display for output voltage / current and adjustment of internal default settings>> Crest factor < 3>> Can bus interface for communication with static bypass switch and/or monitoring unit >> Working temperature: -20C up to +45C>> Power factor range: 0,5 ind. - 1 0,5 cap.>> Ability for stand-alone operation>> Designed to operate together with static bypass switches>> overload capability 130% for 30sec

Modular Inverter Series UNVUNV-FSignallingOperationOutput voltage O.K.High input voltageLow input voltageOverloadflashing: ventilator faultConstant : high internal temperatureCommon alarmDisplay for output voltage (top line, 3 signs) and output current (second line, 3 signs)Relay signalling: Dry contact for common alarm. Contact rating: 8A@250VAC, 8A@30VDC

Modular Inverter Series UNVUNV-FMounting (mounting kit):View into a system (left side)Slide railsPlugs for inverter UNV-F

Modular Inverter Series UNVUNV-FNeeded / available accessories- mounting kit>> article number: 880-MEC-MKT.01 (except UNV48-5,0F) - socket (standard: part of delivery scope)>> article number: 880-MEC-MKT.21 (except UNV48-5,0F)>> article number: 880-MEC-MKT.02 (only UNV48-5,0F)>> article number: 880-MEC-MKT.22 (only UNV48-5,0F)

Modular Inverter Series INV1100W(1375VA) 1600W(2000VA) 4500W(5600VA) (24V only)INV211 - INV216 - INV245x(x=still in development)|-------------------- 1/4-19 x 2U ------------------- | ---------------------- 19 x 2U ------------------------- |Available input voltages of:48V DC60V DC110V DC220V DCAvailable output voltages of:230V AC / 50Hz[HF Technology 2nd Generation]24V DC

Modular Inverter Series INVINV 222 (INV215@24VDC)Technical informationInput:

Output: 230V, 50Hz, single phase

Max. number of inverter working in parallel: 8 pieces

Modular Inverter Series INVINVTechnical informationSignalling: Operation: input voltage within nominal valueOutput voltage within nominal valueCommon alarmINV 222 (INV215@24VDC)Remote signalling: Dry contact for common alarm. Contact rating 60V/0,1A

Modular Inverter Series INVINV 222 (INV215@24VDC)Special features>> Electrical isolation between input and output>> Input over/under voltage shutdown>> Hot-plug-in able>> Ready for paralleling (no fixed master) >>Current sharing based on decrease line of max. 1% for the output voltage >> Load balance max +/- 10% INom >> n+x redundancy>> Output overload and short circuit proof>> Temperature controlled fan cooling (font-to-rear airflow)>> Crest factor < 3>> Can bus interface for communication with static bypass switch and/or monitoring unit>> Working temperature: -20C up to +55C>> Power factor range: 0,5 ind. - 1 0,5 cap.>> Designed to operate together with static bypass switches>> Overload capability 130% for 5sec; 110% for 1min

Modular Inverter Series INVINVMounting:Front view of 19 rackINV 222 (INV215@24VDC)Mounting anglesThree slots for inverter INV222Static bypass switch STS207

Modular Inverter Series INV216INVNeeded / available accessories>> 19 rack, 2 HU, including backplane for 3x inverter + 1x STS >> article number: 502-222-315.LV (for DC input 24-60V)>> article number: 502-222-315.HV (for DC input 108-216V)>> 19 rack, 2HU, with backplane for 4x inverter (without STS)>> article number: 502-222-405.LV (for nominal DC voltages 24-60V)>> article number: 502-222-405.HV (for nominal DC voltages 108-216V)>> Cover plates to cover not used inverter slot, 2HU, RAL7035>> article number: 881-MEC-BPL.02.21.BINV 222

Modular Inverter Series PWS 1000VA(800W) 1800VA(1440W) 2500VA(2000W) 3300VA(2640W) 5000VA(4000W)PWS-1.0 - PWS-2.5 - PWS-5.0 Available input voltages of:24V DCAvailable output voltages of:230V AC / 50HzOther voltages / frequencies on request110V DC220V DCAvailable mechanical design:19 4/5U or wall cabinet

Modular Inverter Series PWSPWSTechnical informationInput:

Output: 230V, 50 single phaseIt is possible to get special output voltages / frequencies

Max. number of inverter working in parallel: 12 pieces

Modular Inverter Series PWSPWSSpecial features>> Electrical isolation between input and output>> Input over/under voltage shutdown>> Available as 19 rack or as wall cabinet>> Ready for paralleling (no fixed master) >>Current sharing based on decrease line of max. 1% for the output voltage >> Load balance max +/- 10% INom >> n+x redundancy>> Crest factor < 2,5>> Output overload and short circuit proof>> Temperature controlled fan cooling (font-to-rear airflow)>> Overload capability 160% for 1min; 130% for 10min>> Special output voltages / frequencies on request>> Working temperature: -20C up to +45C>> Power factor range: 0 ind. - 1 0 cap.>> Analogue measurement instruments for output voltage / current>> Ability for stand-alone operation>> Designed to operate together with static bypass switches

Modular Inverter Series PWSPWSSignallingOperationOutput voltage O.K.High input voltageLow input voltageFailureHigh internal temperatureCommon alarmRelay signalling: Dry contact for common alarm. Contact rating: 5A@250VAC, 5A@30VDC

Modular Inverter Series PWSPWSNeeded / available accessories- mounting kit>> article number: 880-MEC-MKT.03

Modular Static Switches

Modular Static Switches Series STS7kVA@230V AC 14.5kVA@230V AC 30kVA@230V AC 50kVA(1/3phase)STS207 - STS114 - STS230 - STS350 still in development still in development still in development|---- 1/4-19 x 2U ---- | ------------------ 19 x 1U ------------------ | ---------------------------------------------- 19 x 3U -------------------------------------------- |

Modular Static Switches Series STS

Technical informationInput: - Special versions for nominal input voltage of 24-60VDC and 108-216VDC.- 1x 230VAC bypass mains- 1x 230VAC inverter output

Output:- 1x 230VAC, in phase with bypass inputSTS

Modular Static Switches Series STSFunction The STS (static transfer switch) monitors two AC inputs (inverter and bypass). If bypass input is within nominal values, the STS synchronises sync bus with bypass mains (inverter follows sync bus). If inverter input is within nominal values and sync bus is in phase with bypass mains the STS switch to priority input without interruption.If priority input fails, the STS switches over to second input without interruption.If DC input decreases to battery low level, the STS switch off all connected inverter (at the same time) and switch bypass mains to load.The STS sends all information (status, measured values) via CAN bus to external monitoring unit.

Display of:- measured values (DC/AC voltages, output currents, frequency)- status of connected inverter - uncoded text for error state (only actual faults)- time and dateSTS

Modular Static Switches Series STSSTSSignallingOperationInverter inputBypass inputLoad on MainsLoad on InverterSynchron bus in phase with bypass mains inputCommon alarmDisplay of 4 linesRemote signalling: Optocoupler for common alarm, Relay on backplane:Max. contact rating: 30W / 50VA; 60VDC / 125VAC; 1ADC / 1AACCAN-bus InterfaceEthernet Interface

Modular Static Switches Series STSSTSSpecial features>> Hot-plug-in able>> Display for all main operating parameters, settings and measuring values>> Ethernet interface for remote connection via SNMP protocol or WEB-Browser>> Minimized synchronisation time (because of digital PLL) >> It is possible to use diesel gensets as bypass mains>> Transfer time < 4ms>> Monitoring of both incoming sources according to voltage level, frequency and synchronisation>> Temperature controlled fan cooling (font-to-rear airflow)>> Free programmable operation mode (inverter priority or bypass priority)>> Overload capability 1000% for 10ms>> CAN bus interface

Modular Static Switches Series STSNeeded / available accessories>> 19 rack, 2 HU, including backplane for 3x inverter + 1x STS>> article number: 502-216-315.LV (for DC input 24-60V)>> article number: 502-216-315.HV (for DC input 110-220V)>> Manual bypass switches (recommended by ELTEK VALERE INDUSTRIAL, please have a look on separate description)>> article number: 881-880-HBS-7.0 (max. 7,0kVA)>> article number: 881-880-HBS-14.5 (max. 14,5kVA)>> article number: 881-880-HBS-30.0 (max. 50kVA)STS

Modular Static Switches Series STS5000VA 12500VA 23000VA 30000VA 40000VAUNB-5.0 - UNB-12.5 UNB-23.0 UNB-30.0 UNB-40.0| --------------------------------------------------------- 19 x 3U ------------------------------------------------------------ |Available DC input voltages of:24 DC48/60V DC110V DC[1st Generation]220V DC

Static Switches Series UNBUNBTechnical informationInput: DC input: Special version for 24VDC, 48/60VDC, 110VDC or 220VDCAC bypass input:230VAC, 50/60 Hz, single phase also available 3x 230/400VAC, 50Hz, three phase with loadable neutralAC inverter input:230VAC, 50/60Hz, single phasealso available3x 230/400VAC, 50Hz, three phase with loadable neutral

Output: 230V, 50/60Hz, single phase, in phase with bypass inputalso available3x 230/400VAC, 50/60 Hz, three phase with loadable neutral, in phase with bypass inputFree programmable operation mode (inverter to load / bypass to load as standard)

Static Switches Series UNBUNBSignallingOperationPriority sourceSecond source (substitute source)Load on InverterLoad on MainsSynchron bus in phase with bypass mains inputCommon alarmDisplay of 4 linesRelay signalling: Dry contact for common alarm. Contact rating: 8A@230VAC, 8A@24VDC

Static Switches Series UNBUNBSpecial features>> Hot-plug-in able>> Display for all main operating parameters, settings and measuring values>> Optional three phase versions>> Designed for AC systems consisting of UNV- or PWS inverters>> Transfer time < 4ms>> Monitoring of both incoming sources according to voltage level, frequency and synchronisation>> Temperature controlled fan cooling (font-to-rear airflow)>> Free programmable operation mode (inverter priority or bypass priority)>> Overload capability 1000% for 10ms>> CAN bus interface

Static Switches Series UNBUNBNeeded / available accessories>> mounting kit>> article number: 880-MEC-MKT.01 (5.0 to 12.5kVA)>> article number: 880-MEC-MKT.03 (> 23.0kVA)>> Manual bypass switches (recommended by ELTEK VALERE INDUSTRIAL, please have a look on separate description)>> article number: 881-880-HBS-7.0 (max. 7,0kVA)>> article number: 881-880-HBS-14.5 (max. 14,5kVA)>> article number: 881-880-HBS-30.0 (max. 50kVA)Needed / available accessories>> socket (standard: part of delivery scope)>> article number: 880-MEC-MKT.21

Other applicable products?Inverter with built-in static switch UNV-UE series Input: 48/60VDC Output:230V/50Hz/1000VA outMechanical design: 19 x 3U

Other applicable products?Monoblock inverter MBI series Input: 110VDC or 220VDCOutput:115VAC or 230VAC30-50kAV (up to 100kVA at 220VDC)

Mechanical design: stand cabinet in RAL7035

Other applicable products?Monoblock UPS systems MBS series Input: 3x 230/400VACOutput:1ph. 230VAC or 115VAC50 or 60 Hz60 up to 100kVA

Mechanical design: stand cabinet in RAL7035