modelmodel : ::: sphwhts6d315s0q4w3 …product.ic114.com/pdf/s/sphwhts6d315s0q4w3.pdf ·...
TRANSCRIPT
1111//// 22222222
Rev :
SAMSUNGSAMSUNGSAMSUNGSAMSUNG LEDLEDLEDLED
DRAWNDRAWNDRAWNDRAWN CHECKED(Sales)CHECKED(Sales)CHECKED(Sales)CHECKED(Sales) CHECKED(Quality)CHECKED(Quality)CHECKED(Quality)CHECKED(Quality) APPROVEDAPPROVEDAPPROVEDAPPROVED
SSSSPPPPEEEECCCCIIII FFFFIIIICCCCAAAATTTTIIIIOOOONNNNMODELMODELMODELMODEL :::: SPHWHTS6D315S0Q4W3SPHWHTS6D315S0Q4W3SPHWHTS6D315S0Q4W3SPHWHTS6D315S0Q4W3
HIGHHIGHHIGHHIGH POWERPOWERPOWERPOWER LEDLEDLEDLED ---- SUNNIXSUNNIXSUNNIXSUNNIX6666
ISSUE NO :
DATE OF ISSUE : 2222000011110000.... 00004444.... 00001111
[[[[ RankRankRankRank :::: VVVVFFFF((((S1,S2),S1,S2),S1,S2),S1,S2), CIE(QW,QX,QY,QZ),CIE(QW,QX,QY,QZ),CIE(QW,QX,QY,QZ),CIE(QW,QX,QY,QZ), ΦΦΦΦVVVV(((( W1,X1,Y1)]W1,X1,Y1)]W1,X1,Y1)]W1,X1,Y1)]
SAMSUNGSAMSUNGSAMSUNGSAMSUNG LEDLEDLEDLED CO,.LTD.CO,.LTD.CO,.LTD.CO,.LTD.333311114444,,,, MAETAN3- DONG,MAETAN3- DONG,MAETAN3- DONG,MAETAN3- DONG, YEONGTONG- GU,YEONGTONG- GU,YEONGTONG- GU,YEONGTONG- GU,
SUWONSUWONSUWONSUWON---- SISISISI,,,, GYGYGYGYUNGGIUNGGIUNGGIUNGGI---- DO,DO,DO,DO, KOREA,KOREA,KOREA,KOREA, 444444443333---- 777744443333
CUSTOMERCUSTOMERCUSTOMERCUSTOMER ::::
CHECKEDCHECKEDCHECKEDCHECKED CHECKEDCHECKEDCHECKEDCHECKED APPROVEDAPPROVEDAPPROVEDAPPROVED
2222//// 22222222
Contents
1. Product outline • • • • • • • • • • • • • • 3
2. Absolute Maximum Rating • • • • • • • • • • • • • • 3
3. Characteristics • • • • • • • • • • • • • • 3
4. Chromaticity Diagram • • • • • • • • • • • • • • 4
5. Typical Characteristic Graphs • • • • • • • • • • • • • • 5
6. Outline Drawing and Dimension • • • • • • • • • • • • • • 8
7. Solder Conditions • • • • • • • • • • • • • • 9
8. Reliability Test Items and Conditions • • • • • • • • • • • • • • 10
9. Taping Dimension • • • • • • • • • • • • • • 11
10. Label Structure • • • • • • • • • • • • • • 12
11. Lot Number • • • • • • • • • • • • • • 12
12. Reel Packing Structure • • • • • • • • • • • • • • 13
13. Precaution for Use • • • • • • • • • • • • • • 15
14. Hazard Substance Analysis • • • • • • • • • • • • • • 16
15. Revision History • • • • • • • • • • • • • • 22
3333//// 22222222
1111.... ProductProductProductProduct OutlineOutlineOutlineOutline
1) Features
ㆍ Plastic Molded Lead Frame Type : 8.0 ㎜, 8.0 ㎜, 3.9 ㎜
ㆍ Built In 6 LED Chips
ㆍ Beam View Angle(△θ) : 120 ˚
ㆍ Lead(Pb) Free Product : RoHS Compliant
2) Applications
ㆍ General Illumination
ㆍ Down Lighting
ㆍ Decorative Lighting
2222.... AbsoluteAbsoluteAbsoluteAbsolute MaximumMaximumMaximumMaximum RatingRatingRatingRatingㆍ Operation Forward Current ·· · · · · · · · · · · · · · · · · · · · · · · · · · · · · 250 ㎃
ㆍ Peak Pulsed Forward Current · · · · · · · · · · · · · · · · · · · · · · · · · · 300 ㎃
(Duty 1/10 and Pulse Width 10 msec)
ㆍ Reverse Voltage ·· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 16.5 V
ㆍ Thermal Resistance (Rth J-S) · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ≒ 6 ℃/W
ㆍ Operating Temperature Range (TOPR) · · · · · · · · · · · · · · · · · - 40 ℃ ∼ 85 ℃
ㆍ Storage Temperature Range (TSTG) · · · · · · · · · · · · · · · · · · · - 40 ℃ ∼ 110 ℃
ㆍ LED Junction Temperature (TJ) · · · · · · · · · · · · · · · · · · · · · · · · · 120 ℃
3333.... CharacteristicsCharacteristicsCharacteristicsCharacteristics
1) Electrical properties (Ta = 25 ℃)
ParameterParameterParameterParameter SymbolSymbolSymbolSymbol ConditionConditionConditionCondition RankRankRankRank Min.Min.Min.Min. Typ.Typ.Typ.Typ. Max.Max.Max.Max. UnitUnitUnitUnit
Reverse Voltage VR IR = 5 ㎃ - 12.0 - 16.5 V
Forward Voltage VF IF = 250 ㎃ S0S1 8.9 - 9.7
VS2 9.7 - 10.5
2) Luminous Flux (Ta = 25 ℃)
RankRankRankRank SymbolSymbolSymbolSymbol ConditionConditionConditionCondition Min.Min.Min.Min. Typ.Typ.Typ.Typ. Max.Max.Max.Max. UnitUnitUnitUnit
W3
W1
ΦV IF = 250 ㎃
170 - 190
㏐X1 190 - 210
Y1 210 - 230
4444//// 22222222
3) Chromaticity Coordinates (Ta = 25 ℃)
※ Tolerance : VF : ± 0.1, ΦV : ± 10 %, CCx CCy : ± 0.02
※ Color Rendering Index (Ra) : Typ. 82
※ Luminous Flux : Typ. 98 ㏐/W (@120 ㎃)
4444.... ChromaticityChromaticityChromaticityChromaticity DiagramDiagramDiagramDiagram
Approved Rank
SymbolSymbolSymbolSymbol VVVVFFFF CIECIECIECIE ΦΦΦΦVVVV
Rank S1,S2 QW, QX, QY, QZ W1, X1, Y1
CCT(K)CCT(K)CCT(K)CCT(K) ConditionConditionConditionCondition
QW 0.3207 0.3290 0.3290 0.3215 0.3467 0.3538 0.3417 0.335QX 0.3215 0.3290 0.3290 0.3222 0.335 0.3417 0.3300 0.3243QY 0.3290 0.3376 0.3371 0.3290 0.3538 0.3616 0.3490 0.3417QZ 0.3290 0.3371 0.3366 0.3290 0.3417 0.3490 0.3369 0.33006020~5310 IF =250 ㎃
RankRankRankRank CCxCCxCCxCCx CCyCCyCCyCCy
Q4
CIE CoordinateCIE CoordinateCIE CoordinateCIE Coordinate
0.300.340.380.420.46
0.30 0.34 0.38 0.42 0.46 0.50CCxCCxCCxCCxCCyCCyCCyCCy Q4Q4Q4Q4 R4R4R4R4 S4S4S4S4 T4T4T4T4 U4U4U4U4 V4V4V4V4 W4W4W4W4
QWQWQWQWQXQXQXQX QYQYQYQYQZQZQZQZ
5555//// 22222222
5555.... TypicalTypicalTypicalTypical CharacteristicCharacteristicCharacteristicCharacteristic GraphGraphGraphGraphssss
.
Forward Current vs. Forward VoltageForward Current vs. Forward VoltageForward Current vs. Forward VoltageForward Current vs. Forward Voltage
1
10
100
1000
8.2 8.7 9.2 9.7 10.2 10.7
Forward Voltage[V]Forward Voltage[V]Forward Voltage[V]Forward Voltage[V]
Forward Current
Forward Current
Forward Current
Forward Current[[ [[㎃㎃ ㎃㎃]] ]]
6666//// 22222222
Spectrum DistributionSpectrum DistributionSpectrum DistributionSpectrum Distribution
0.0
0.2
0.4
0.6
0.8
1.0
380 480 580 680 780
WavelengthWavelengthWavelengthWavelength[[[[㎚㎚㎚㎚]]]]
Relative Emission
Relative Emission
Relative Emission
Relative Emission
Intensity
Intensity
Intensity
Intensity
7777//// 22222222
Relative Luminous Flux vs Juntion Temperature(℃)Relative Luminous Flux vs Juntion Temperature(℃)Relative Luminous Flux vs Juntion Temperature(℃)Relative Luminous Flux vs Juntion Temperature(℃)
0.0
0.2
0.4
0.6
0.8
1.0
1.2
25 35 45 55 65 75 85
Juntion Temperature(℃)Juntion Temperature(℃)Juntion Temperature(℃)Juntion Temperature(℃)
Relative Luminous Flux
Relative Luminous Flux
Relative Luminous Flux
Relative Luminous Flux
8888//// 22222222
6666.... OutlineOutlineOutlineOutline DrawingDrawingDrawingDrawing andandandand DimensionDimensionDimensionDimension
Remarks
Heat sink is to be soldered, If not, use the heat conductive adhesive.
Unit : ㎜Tolerance : ± 0.2
Pick and Place
1. Do not place pressure on the encapsulating resin ("A")
2. The maximum compressing force is 15N on the polymer ("B")
9999//// 22222222
7777.... SolderSolderSolderSolder ConditionsConditionsConditionsConditions
1) Reflow Conditions (Pb-Free)
Reflow Frequency : 2 time max.
2) For Manual Soldering
Not more than 5 seconds @Max. 300 ℃, under soldering iron.
0
50
100
150
200
250
300
0 50 100 150 200 250 300
Time[ sec]
Te
mp
era
ture
[
℃] 0Preheating : 150~ 180 ℃ Peak Temp. : 260± 5 ℃, Max. 10 sec
Max. 60 secTime above 220 ℃ : Max. 60 sec
Max. Temp. gradient in cooling : - 5 ℃/sec
60~ 120 sec
11110000//// 22222222
8888.... ReliabilityReliabilityReliabilityReliability TestTestTestTest ItemsItemsItemsItems andandandand ConditionsConditionsConditionsConditions
1) Test Items
※ Max. DC current is depending on maximum current derating curve.
2) Criteria for Judging the Damage
* U.S.L : Upper Standard Level, L.S.L : Lower Standard Level
TestTestTestTest ItemItemItemItemssss TestTestTestTest ConditionsConditionsConditionsConditionsTestTestTestTest
Hours/CyclesHours/CyclesHours/CyclesHours/Cycles
Room Temperature
life test25 ℃, IF = Max DC※ 1,000 h
High Temperature
humidity life test85 ℃, 85 % RH, IF = Max DC※ 1,000 h
High Temperature
life test85 ℃, IF = Max DC※ 1,000 h
Low Temperature
life test- 40 ℃, IF = Max DC※ 1,000 h
High Temperature
Storage110 ℃ 1,000 h
Low Temperature
Storage- 40 ℃ 1,000 h
Thermal Shock - 40 / 120 ℃, each 30 min 200 cycles
Temperature
humidity
Cycle On/ Off test
- 40 / 85 ℃, each 20 min, 100 min transfer
Power On/ off each 5 min, Max DC※ 100 cycles
Reflow(Pb- Free)
Peak 260± 5 ℃ for 10 sec 3 times
ESD(HBM)
R1 : 10 ㏁ , R2 : 1.5 ㏀ , C : 100 ㎊
3 times(± 5 ㎸)
ItemItemItemItem SymbolSymbolSymbolSymbol TestTestTestTest ConditionConditionConditionConditionLimitLimitLimitLimit
MinMinMinMin MaxMaxMaxMax
Forward Voltage VF IF = 250 ㎃ - U.S.L.*1.1
Luminous Flux ΦV IF = 250 ㎃ L.S.L.*0.3 -
Reverse Voltage VR IR = 5 ㎃ - U.S.L.*2.0
11111111//// 22222222
9999.... TapingTapingTapingTaping DimensionDimensionDimensionDimension
(1) Quantity : 1,000 Pcs / 13" Reel.
(2) Cumulative Tolerance : Cumulative Tolerance/ 10 pitches is less than ± 0.2 ㎜
(3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1- 0.7N when
the cover tape is turned off from the carrier tape at 10 ℃ angle to be the
carrier tape.
(4) Packaging : P/ N, Manufacturing data Code No. and quantity to be indicated
on a damp proof Package
SymbolSymbolSymbolSymbol AAAA BBBB CCCC W1W1W1W1 W2W2W2W2
Dimension(㎜) 330 ± 1 80 ± 1 25 ± 0.5 13 ± 0.3 29.5 ± 1
CathodeCathodeCathodeCathode
AnodeAnodeAnodeAnode
11112222//// 22222222
11110000.... LabelLabelLabelLabel StructureStructureStructureStructure
Rank Code
/ S1/ : VF Rank (refer to page 3)
/ QW/ : Chromaticity Coordinate Rank, CIE (refer to page 4)
/ W1/ : Luminous Flux (refer to page 3)
11111111.... LotLotLotLot NumberNumberNumberNumberThe Lot number is composed of the following characters
●◎◇◆□■△△△ / I▲▲▲ / xxxx PCS● : Production Site (S:SAMSUNG LED, G:Gosin China, L:SOLLEDS)◎ : L (LED)◇ : Product State (A:Normality, B:Bulk, C:First Production, R:Reproduction, S:Sample)◆ : Year (U:2010, V:2011, W:2012...)□ : Month (1 ~ 9, A, B)■ : Day (1 ~ 9, A, B ~ V)△ : SAMSUNG LED Product Number (1 ~ 999)▲ : Reel Number (1 ~ 999)
SPHWHTS6D315S0Q4W3 S1QWW1 XXXX
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII●◎◇◆□■△△△ / I▲▲▲ / XXXXpcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIII
S1QWW1
11113333//// 22222222
11112222.... ReelReelReelReel PackingPackingPackingPacking StructureStructureStructureStructure
1) Reel
2) Aluminum Bag
3) Inner Box
HP LED
Material : Paper(SW3B(B))
TYPETYPETYPETYPESIZE(SIZE(SIZE(SIZE(㎜㎜㎜㎜))))
LLLL WWWW HHHH
13inch 335 45 335
↓↓↓↓
↓↓↓↓Silica gelHumidity Indicator Card
H
L
W
SPHWHTS6D315S0Q4W3 S1QWW1 XXXX
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII●◎◇◆□■△△△ / I▲▲▲ / XXXXpcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIII
S1QWW1
SPHWHTS6D315S0Q4W3 S1QWW1 XXXX
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII●◎◇◆□■△△△ / I▲▲▲ / XXXXpcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIII
S1QWW1
SPHWHTS6D315S0Q4W3 S1QWW1 XXXX
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII●◎◇◆□■△△△ / I▲▲▲ / XXXXpcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIII
S1QWW1
11114444//// 22222222
4) Carton Box
Material : Paper(SW3B(B))
TYPETYPETYPETYPESIZE(SIZE(SIZE(SIZE(㎜㎜㎜㎜))))
LLLL WWWW HHHH
13inch 350 350 350
HP LED
↓↓↓↓
L
W
H
SPHWHTS6D315S0Q4W3 S1QWW1 XXXX
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII●◎◇◆□■△△△ / I▲▲▲ / XXXXpcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIII
S1QWW1
11115555//// 22222222
11113333.... PrecautionPrecautionPrecautionPrecaution forforforfor UseUseUseUse
1) For over- current- proof function, customers are recommended to apply
resistors to prevent sudden change of the current caused by slight shift of
the voltage.
2) This device should not be used in any type of fluid such as water, oil,
organic solvent, etc. When washing is required, IPA is recommended to use.
3) When the LEDs illuminate, operating current should be decided after
considering the ambient maximum temperature.
4) LEDs must be stored in a clean environment. If the LEDs are to be stored
for 3 months or more after being shipped from SAMSUNG LED, they should
be packed by a sealed container with nitrogen gas injected. (Shelf life of
sealed bags : 12 months, temp. 0~ 40℃, 20~ 70%RH)
5) After storage bag is open, device subjected to soldering, solder reflow, or
other high temperature processes must be:
a. Mounted within 72 hours (3days) at an assembly line with a condition
of no more than 30℃/ 60%RH,
b. Stored at <10% RH.
6) Repack unused Products with anti- moisture packing, fold to close any
opening and then store in a dry place.
7) Devices require baking before mounting, if humidity card reading is >60% at
23± 5℃.
8) Devices must be baked for 24hours at 65± 5℃, if baking is required.
9) The LEDs are sensitive to the static electricity and surge. It is
recommended to use a wrist band or anti- electrostatic glove when handling
the LEDs.
If voltage exceeding the absolute maximum rating is applied to LEDs, it may
cause damage or even destruction to LED devices.
Damaged LEDs may show some unusual characteristics such as increase in
leak current, lowered turn- on voltage, or abnormal lighting of LEDs at low
current.
11116666//// 22222222
11117777//// 22222222
11118888//// 22222222
11119999//// 22222222
22220000//// 22222222
22221111//// 22222222
22222222//// 22222222
DateDateDateDate RevisionRevisionRevisionRevision HistoryHistoryHistoryHistoryAuthorAuthorAuthorAuthor
DrawnDrawnDrawnDrawn ApprovedApprovedApprovedApproved
2010.04.01 Preliminary S.Y.Choi K.I Min
RevisionRevisionRevisionRevision HistoryHistoryHistoryHistory((((ModelModelModelModel :::: SPHWHTS6D315S0Q4W3))))