model no: wp-250 -...
TRANSCRIPT
WELDING POSITIONER
160
• 13-3/4” Diameter Table• 0 to 5.5 RPM Rotation Speed• Manual Tilt Adjustment• 115V• 0 to 90° Tilting Angle• High Frequency Protected• Standard w/Foot Control Switch• Shipping Weight 113 lbs.
Designed for rotation of lighter work pieces. Will hold 440 lbs. in thehorizontal position and 250 lbs. in the vertical position.Note: C/G of load not to be more than 4” from the center of the turntableand 4” from the face of the turntable.
• Low Profile• Self Centering• Reversible Jaws• Easy Mounting• External & Internal Gripping
- 0” - 8” on O.D.- 3” - 11” on I.D.
• Shipping Weight 20 lbs.
MODEL NO:
The above illustration shows the chuck mounted to the PROFAX Welding Positioner WP-250.
See page 163 for complete specifications.
MODEL NO:
WP-250230V model available for export
(Foot Control CFS-302)
WELDING POSITIONERS
• 19-5/8” Diameter Table• 0.4 - 4 RPM Rotation Speed• Power Tilt Adjustment• 115V• 0 to 135° Tilting Angle• High Frequency Protected• Standard Fwd./Rev. Foot Control• Shipping Weight 580 lbs.
• 24-1/2” Diameter• 0.2 to 2 RPM Rotation Speed• 115V• 0 to 135° Tilting Angle• High Frequency Protected• Standard Fwd./Rev. Foot Control• Shipping Weight 1,200 lbs.
MODEL NO:
MODEL NO:
Will hold 500 lbs. in the vertical position and 900 lbs. in the horizontal position. Note: C/G of load not to be more than 6” from the center of the turntable and 6” from the face of the turntable.
Will hold 1,000 lbs. in the vertical position and 1,750 lbs. in the horizontal position. Note: C/G of load not to be more than 6” from the center of the turntable and 6” from the face of the turntable.
WP-500
WP-1000
161
230V model available for export
230V model available for export
See page 163 for complete specifications.
(Foot Control CFS-404)
(Foot Control CFS-404)
See page 163 for complete specifications.
MODEL NO:
162
WELDING POSITIONER
• 35-1/2” Diameter Table• .2 to 1.2 RPM Rotation Speed• 440V 3 Phase models• 0 to 135° Tilting Angle• High Frequency Protected• Standard Hand Control Pendant• Shipping Weight 1,640 lbs.
Will hold 2,000 lbs. in the vertical position and 3,500 lbs. in the horizontal position. Note: C/G of load not to be more than 12” from the center of the turntable and 12” from the face of the turntable.
WP-2000-4 • (440V 3PH)
2000 lb.Welding Positioner
163
WELDING POSITIONER GRIPPER
• Self Centering• Reversible Jaws• Easy Mounting
SPECIFICATIONS WP-250 WP-500 WP-1000 WP-2000-4
CAPACITY VERTICAL 250 LBS. 500 LBS. 1,000 LBS. 2,000 LBS.
CAPACITY HORIZONTAL 440 LBS. 900 LBS. 1,750 LBS. 3,500 LBS.
LOAD CENTER OF GRAVITY 4” 6” 6” 12”
TILT MANUAL POWER POWER POWER
TILT ANGLE (DEGREES) 0 - 90 0 - 135 0 - 135 0 - 135
TILT ANGLE INDICATOR N/A N/A N/A STANDARD
GROUND CAPACITY 200 AMPS 300 AMPS 500 AMPS 1,000 AMPS
GROUNDING DEVICE CARBON BRASS BRASS ROTARY
HIGH FREQ. PROTECTION YES YES YES YES
VOLT / AC 115 115 115 440 3PH
POWER REQ. 5 AMP 10 AMP 10 AMP 5 AMP
TABLE THICKNESS 9/16” 7/8” 1” 1”
TABLE DIAMETER 13-3/4” 19-5/8” 24-1/2” 35-1/2”
TABLE CONFIGURATION 3 - SLOT 4 - SLOT 4 - SLOT 4 - SLOT
OPTIONAL CHUCK WPC-11 WPG-22 WPG-22 and 26 WPG-22, 26 and 34
TABLE HEIGHT (HORIZONTAL) 13-7/32” 25-1/4” 33-11/16” 35-7/8”
TABLE CENTER HEIGHT (VERTICAL) 10-3/64” 21-1/4” 29” 30-3/4”
THROUGH HOLE 1-1/8” N/A N/A N/A
TABLE R.P.M. 0 - 5.5 0.4 - 4 0.2 - 2 .2 - 1.2
ROTATION MOTOR H.P. 1/8 H.P. 1/6 H.P. 1/4 H.P. 1 H.P.
MAX. TORQUE 345 LBS./FT. 2,000 LBS./FT. 6,000 LBS./FT. 12,000 LBS./FT.
VARIABLE SPEED ROTATION YES YES YES YES
FOOT CONTROL SINGLE FWD./REV. FWD./REV. N/A
HAND PENDANT OPTIONAL OPTIONAL OPTIONAL STANDARD
ANCHOR POINTS 4 4 6 6
LEVELING BOLTS N/A INCLUDED INCLUDED INCLUDED
UNIT WIDTH 12-1/2” 26” 32-1/4” 36”
UNIT LENGTH 21” 33-7/8” 48-1/2” 61-1/2”
SHIPPING WEIGHT 113 LBS. 580 LBS. 1,200 LBS. 1,640 LBS.
COMPLETE POSITIONER SPECIFICATIONS
PROFAX NO. POSITIONER O.D. CAPACITY I.D. CAPACITY WEIGHTWPG-22 WP-500/WP-1000/WP-2000 1” - 15” 4” - 22” 130 LBS.WPG-26 WP-1000/WP-2000 1½” - 18” 6” - 26” 235 LBS.WPG-34 WP-2000 2” - 26” 6” - 34” 365 LBS.
MODEL NO:
162
WELDING POSITIONER
• 35-1/2” Diameter Table• .2 to 1.2 RPM Rotation Speed• 440V 3 Phase models• 0 to 135° Tilting Angle• High Frequency Protected• Standard Hand Control Pendant• Shipping Weight 1,640 lbs.
Will hold 2,000 lbs. in the vertical position and 3,500 lbs. in the horizontal position. Note: C/G of load not to be more than 12” from the center of the turntable and 12” from the face of the turntable.
WP-2000-4 • (440V 3PH)
2000 lb.Welding Positioner
163
WELDING POSITIONER GRIPPER
• Self Centering• Reversible Jaws• Easy Mounting
SPECIFICATIONS WP-250 WP-500 WP-1000 WP-2000-4
CAPACITY VERTICAL 250 LBS. 500 LBS. 1,000 LBS. 2,000 LBS.
CAPACITY HORIZONTAL 440 LBS. 900 LBS. 1,750 LBS. 3,500 LBS.
LOAD CENTER OF GRAVITY 4” 6” 6” 12”
TILT MANUAL POWER POWER POWER
TILT ANGLE (DEGREES) 0 - 90 0 - 135 0 - 135 0 - 135
TILT ANGLE INDICATOR N/A N/A N/A STANDARD
GROUND CAPACITY 200 AMPS 300 AMPS 500 AMPS 1,000 AMPS
GROUNDING DEVICE CARBON BRASS BRASS ROTARY
HIGH FREQ. PROTECTION YES YES YES YES
VOLT / AC 115 115 115 440 3PH
POWER REQ. 5 AMP 10 AMP 10 AMP 5 AMP
TABLE THICKNESS 9/16” 7/8” 1” 1”
TABLE DIAMETER 13-3/4” 19-5/8” 24-1/2” 35-1/2”
TABLE CONFIGURATION 3 - SLOT 4 - SLOT 4 - SLOT 4 - SLOT
OPTIONAL CHUCK WPC-11 WPG-22 WPG-22 and 26 WPG-22, 26 and 34
TABLE HEIGHT (HORIZONTAL) 13-7/32” 25-1/4” 33-11/16” 35-7/8”
TABLE CENTER HEIGHT (VERTICAL) 10-3/64” 21-1/4” 29” 30-3/4”
THROUGH HOLE 1-1/8” N/A N/A N/A
TABLE R.P.M. 0 - 5.5 0.4 - 4 0.2 - 2 .2 - 1.2
ROTATION MOTOR H.P. 1/8 H.P. 1/6 H.P. 1/4 H.P. 1 H.P.
MAX. TORQUE 345 LBS./FT. 2,000 LBS./FT. 6,000 LBS./FT. 12,000 LBS./FT.
VARIABLE SPEED ROTATION YES YES YES YES
FOOT CONTROL SINGLE FWD./REV. FWD./REV. N/A
HAND PENDANT OPTIONAL OPTIONAL OPTIONAL STANDARD
ANCHOR POINTS 4 4 6 6
LEVELING BOLTS N/A INCLUDED INCLUDED INCLUDED
UNIT WIDTH 12-1/2” 26” 32-1/4” 36”
UNIT LENGTH 21” 33-7/8” 48-1/2” 61-1/2”
SHIPPING WEIGHT 113 LBS. 580 LBS. 1,200 LBS. 1,640 LBS.
COMPLETE POSITIONER SPECIFICATIONS
PROFAX NO. POSITIONER O.D. CAPACITY I.D. CAPACITY WEIGHTWPG-22 WP-500/WP-1000/WP-2000 1” - 15” 4” - 22” 130 LBS.WPG-26 WP-1000/WP-2000 1½” - 18” 6” - 26” 235 LBS.WPG-34 WP-2000 2” - 26” 6” - 34” 365 LBS.
• Power mast:Constant speed60” vertical travel92” clearance under boom
• Power boom with:78” of reach200 lb. load capacityVariable speedAuto and manual settings
• Anti-fall device
• Manual travel car with:V-wheelsBrake
• Locking swivel base with:Mounting bracket for power source
• Hand control pendant
• 440V 3 phase
165
WELDING MANIPULATORS
MODEL NO:
WM-66-4WM-66-4
PROFAX NO: WM-SAOptional for mounting sub-arc package.
Maximum load capacity 5,000 lbs.(2,500 lbs. max for each the drive and idler)
• Includes One Drive and One Idler• 4” - 48” Diameter• 0 to 5 RPM Rotation Speed• 115V• High Frequency Protected• Standard Fwd./Rev. Foot Control• Shipping Weight 430 lbs.
MODEL NO:
TR-5000
Maximum load capacity 1500 lbs.(750 lbs. max for each the drive and idler)
*Note: Additional idler rolls available PROFAX NO: IR-750
• Includes One Drive and One Idler• 1-1/2” to 16” Diameter• 0 to 8 RPM Rotation Speed• 115V• High Frequency Protected• Standard w/Foot Control Switch• Adjustable Drive Tension• Shipping Weight 146 lbs.
164
TURNING ROLLS
*Note: Additional idler rolls available PROFAX NO: IR-2500
230V model available for export
MODEL NO:
TR-1500230V model available for export
• Power mast:Constant speed60” vertical travel92” clearance under boom
• Power boom with:78” of reach200 lb. load capacityVariable speedAuto and manual settings
• Anti-fall device
• Manual travel car with:V-wheelsBrake
• Locking swivel base with:Mounting bracket for power source
• Hand control pendant
• 440V 3 phase
165
WELDING MANIPULATORS
MODEL NO:
WM-66-4WM-66-4
PROFAX NO: WM-SAOptional for mounting sub-arc package.
Maximum load capacity 5,000 lbs.(2,500 lbs. max for each the drive and idler)
• Includes One Drive and One Idler• 4” - 48” Diameter• 0 to 5 RPM Rotation Speed• 115V• High Frequency Protected• Standard Fwd./Rev. Foot Control• Shipping Weight 430 lbs.
MODEL NO:
TR-5000
Maximum load capacity 1500 lbs.(750 lbs. max for each the drive and idler)
*Note: Additional idler rolls available PROFAX NO: IR-750
• Includes One Drive and One Idler• 1-1/2” to 16” Diameter• 0 to 8 RPM Rotation Speed• 115V• High Frequency Protected• Standard w/Foot Control Switch• Adjustable Drive Tension• Shipping Weight 146 lbs.
164
TURNING ROLLS
*Note: Additional idler rolls available PROFAX NO: IR-2500
230V model available for export
MODEL NO:
TR-1500230V model available for export
WCS-88MMotorized Welding Cross Slides
Specifications:• Travel: 7-7/8” x 7-7/8”• Slide Adjustment: Variable 0-8 i.p.m. Joystick Pendant Control• Load Capacity: 200 lbs. @ 4”• Motors: 24 VDC• Input Power: 115 VAC• WxHxD: 19-1/4” x 19-1/4” x 6-3/4”• 1-1/8” Dia. Hardened Load Bearing Guide Rods• 1” Dia. Driven Screw• Back of Slide Mount: 4 Pre-Drilled Holes• Welding Head Mounting: 6 Drilled & Tapped Holes• Weight of Slides: 86 lbs.• Weight of Slides & Controls: 98 lbs.
WO-1SWelding Oscillator
Linear Type
Specifications:• Operator friendly pendant• Torch Diameters: 5/8” to 1-3/8”• Load Capacity: 10 lbs.• Speed: 0-130 IPM• Weld Width: 0-1-9/16”• Centerline Adjustment: +/- 1/4”• L & R Dwell: 0-2 sec.• Motor 24V DC/Rack & Pinion Drive• Input Power: 110 or 220 VAC
WO-1VWelding Oscillator
Angle Type
Specifications:• Operator friendly pendant• Torch Diameters: 5/8” to 1-3/8”• Load Capacity: 10 lbs.• Speed: 0-50 RPM• Swing Width: +/- 8 deg.• Centerline Adjustment: +/- 4 deg.• L & R Dwell: 0-2 sec.• Motor 24V DC/Worm Drive• Input Power: 110 or 220 VAC
PROFAX NO. DESCRIPTIONWO-1S Welding oscillator - Linear
PROFAX NO. DESCRIPTIONWO-1V Welding oscillator - Angle
Adjustment Slide, Oscillator Linear Type,and Oscillator Angle Type
Welding Slide, Compound Slides andMotorized Welding Cross Slides
WCS-8 & WCS-88WCS-222Welding Slide & Compounded
Welding Cross Slides3-Way Torch Adjustment Slidewith Torch Angle Adjustment
PROFAX NO. DESCRIPTIONWCS-8 Welding slideWCS-88 Compounded slides
Specifications: (WCS-8)• Travel: 7-7/8”• Slide Adjustment: Manual Hand Wheel• Integrated Slide Lock• Load Capacity: 200 lb. @ 4”• 20mm (approx. 3/4”) Dia. Hardened Load Bearing Guide Rods• 16mm (approx. 5/8”) Dia. Drive Screw• Length of Slide: 13-1/4” (Including Handle While Extended 18”)• Height of Slide: 4-3/8”• Depth: 2-3/8”• Easily Compounded: 4 Bolts (Makes WCS-88)• Convenient to Mount: 4 Pre-Drilled Holes• Weight: 21 lbs. (WCS-88: 42 lbs.)
WCS-8
WCS-88
PROFAX NO. DESCRIPTIONWCS-222 3-Way adjustment slide
Specifications:• LxWxH Adjustment: 1-3/4” x 1-3/4” x 1-3/4”• Slide Adjustment: Manual Hand Wheel• Torch Angle Adjustment: 90 Degree• Torch Diameter: 5/8” - 1-3/8”• Torch Clamp: V-Block• Load Capacity: 10 lbs.• Easy Mounting: 4 Drilled & Tapped Holes• Weight: 3.5 lbs.
166 167
PROFAX NO. DESCRIPTIONWCS-88M Motorized welding cross slides
WCS-88MMotorized Welding Cross Slides
Specifications:• Travel: 7-7/8” x 7-7/8”• Slide Adjustment: Variable 0-8 i.p.m. Joystick Pendant Control• Load Capacity: 200 lbs. @ 4”• Motors: 24 VDC• Input Power: 115 VAC• WxHxD: 19-1/4” x 19-1/4” x 6-3/4”• 1-1/8” Dia. Hardened Load Bearing Guide Rods• 1” Dia. Driven Screw• Back of Slide Mount: 4 Pre-Drilled Holes• Welding Head Mounting: 6 Drilled & Tapped Holes• Weight of Slides: 86 lbs.• Weight of Slides & Controls: 98 lbs.
WO-1SWelding Oscillator
Linear Type
Specifications:• Operator friendly pendant• Torch Diameters: 5/8” to 1-3/8”• Load Capacity: 10 lbs.• Speed: 0-130 IPM• Weld Width: 0-1-9/16”• Centerline Adjustment: +/- 1/4”• L & R Dwell: 0-2 sec.• Motor 24V DC/Rack & Pinion Drive• Input Power: 110 or 220 VAC
WO-1VWelding Oscillator
Angle Type
Specifications:• Operator friendly pendant• Torch Diameters: 5/8” to 1-3/8”• Load Capacity: 10 lbs.• Speed: 0-50 RPM• Swing Width: +/- 8 deg.• Centerline Adjustment: +/- 4 deg.• L & R Dwell: 0-2 sec.• Motor 24V DC/Worm Drive• Input Power: 110 or 220 VAC
PROFAX NO. DESCRIPTIONWO-1S Welding oscillator - Linear
PROFAX NO. DESCRIPTIONWO-1V Welding oscillator - Angle
Adjustment Slide, Oscillator Linear Type,and Oscillator Angle Type
Welding Slide, Compound Slides andMotorized Welding Cross Slides
WCS-8 & WCS-88WCS-222Welding Slide & Compounded
Welding Cross Slides3-Way Torch Adjustment Slidewith Torch Angle Adjustment
PROFAX NO. DESCRIPTIONWCS-8 Welding slideWCS-88 Compounded slides
Specifications: (WCS-8)• Travel: 7-7/8”• Slide Adjustment: Manual Hand Wheel• Integrated Slide Lock• Load Capacity: 200 lb. @ 4”• 20mm (approx. 3/4”) Dia. Hardened Load Bearing Guide Rods• 16mm (approx. 5/8”) Dia. Drive Screw• Length of Slide: 13-1/4” (Including Handle While Extended 18”)• Height of Slide: 4-3/8”• Depth: 2-3/8”• Easily Compounded: 4 Bolts (Makes WCS-88)• Convenient to Mount: 4 Pre-Drilled Holes• Weight: 21 lbs. (WCS-88: 42 lbs.)
WCS-8
WCS-88
PROFAX NO. DESCRIPTIONWCS-222 3-Way adjustment slide
Specifications:• LxWxH Adjustment: 1-3/4” x 1-3/4” x 1-3/4”• Slide Adjustment: Manual Hand Wheel• Torch Angle Adjustment: 90 Degree• Torch Diameter: 5/8” - 1-3/8”• Torch Clamp: V-Block• Load Capacity: 10 lbs.• Easy Mounting: 4 Drilled & Tapped Holes• Weight: 3.5 lbs.
166 167
PROFAX NO. DESCRIPTIONWCS-88M Motorized welding cross slides