model no. wa-10i05rg-aaab customere. this authorisation is valid until 12 november 2014 or the...

Model No. WA-10I05RG-AAAB Customer 原形

Description AC : 100-240V ,50~60Hz DC : 5V/2A

Approved By

Inxtron 原形

ASIAN POWER DEVICES INC. 亞源科技股份有限公司

Approver Safety Engineer Engineer Prepare By

何豔梅

亞源科技股份有限公司 ASIAN POWER DEVICES INC. ADD：NO.5 LANE 83. LUNG-SOU ST, TAO-YUAN CITY, TAIWAN R.O.C. TEL：886-3-379-9078 FAX：886-3-379-9263

Rev. 1.0

A P D

D C C

2010-12-25

APPROVAL SHEETS

APD APD

亞源科技股份有限公司 ASIAN POWER DEVICES INC. APDAPD Change List Model No. : WA-10I05RG-AAAB

Rev. Date Changed contents Why Prepared by Checked by Approved by

1.0 2010-12-25 New 何豔梅王春富蕭鈺樹

The Contents

Model No. WA-10I05RG-AAAB Rev. 1.0

Description AC : 100-240V ,50~60Hz DC : 5V/2A

Date 2010-12-25

Customer 原形

Customer P/N

Approved By: Prepare By:

蕭鈺樹何豔梅

Item Document Name File Name Sub-Page Rev. Date

1. Electrical Specification S8033-19440-00 4 00 2010-07-06

2. Mechanical Dimension M8034-10640-00 1 00A 2010-12-24

3. Label (Assembly Drawing) L8034-10640-00 1 00A 2010-12-24

4. Packing Process K8034-1064A-00 1 00A 2010-12-24

5. Safety(Singapore:PSB) 1 --- 2009-11-19

6. Safety(Oceania: C-Tick) 2 --- 2009-11-02

7. Safety(Taiwan: BSMI) 1 --- 2010-11-08

8. Safety(SAA) 2 --- 2009-11-17

9. Safety( Japan:PSE) 2 --- 2009-11-26

10. Safety(Argentina:S) 1 --- 2009-11-17

11. Safety(Germany:GS) 2 --- 2009-11-15

12. Safety(Korea: EK) 1 --- 2010-01-08

13. Safety(America:UL) 2 --- 2010-10-26

14. Safety(Russian:GOST-R) 1 --- 2009-11-12

15. Safety(Mexico:NOM ) 1 --- 2010-12-08

16. Safety(China: CCC) 2 --- 2010-11-18

17. Safety(Europe EMC:CE) 2 --- 2010-01-18

18. Safety(America EMC:FCC) 1 --- 2009-11-02

19. Safety(Japan EMC:VCCI ) 1 --- 2009-11-25

20. MEPS 1 --- 2010-0-07

21. MTBF Report 3 X.0 ---

Electrical Specification

Model No. : WA10I05 Rev.:00

OP-04-300-04 V.:1.7 保存:7 年 PAGE 2

1. Feature : 1.1. 10W Wall-Mount Switching Mode Power Adapter with 2 Pin Plug. 1.2. The Power Supply conformed with Energy Star.

2. INPUT CHARACTERISTICS : 2.1. Input Voltage

Input voltage range : 100~240 Vac ±10%. 2.2. Input Frequency

Input frequency range : 50~60 Hz ±3 Hz . 2.3. Input current

Input current should lower than 0.3/0.2 Arms under full-load and 115/230 Vrms input voltage conditions. 2.4. Inrush Current

Inrush current should be lower than 50/100A Max under cold start and 1st half cycle of 115/230 Vrms input voltage.

2.5. Leakage Current

Leakage current should be lower than 250uA under 264Vrms/60HZ input.

2.6. Power Consumption Input power saving should be lower than 0.3 W under No-load and 230 Vrms input voltage conditions. It would conform to “ENERGY STAR®” LEVEL standard.Ⅴ

2.7. Efficiency

+5V output current 2.0A/1.5A/1.0A/0.5A correspondingly under input voltage 115/230Vrms, sum of each efficiency division 4 should be greater than 73.37%, after burn in 0.5 hour in full load. It would conform to “ENERGY STAR®” LEVEL Ⅴstandard.



OP-04-300-04 V.:1.7 保存:7 年 PAGE 3

3. OUTPUT CHARACTERISTICS : 3.1 Output Characteristics

Output Voltage + 5 Vdc

Output Tolerance ± 5 %

Full Load 2 A

Min. Load 0 A

Max. Ripple Voltage 100 mVp-p @ 25℃ (*Note 1)

Hold up Time 8mS Full Load & 115Vac/60Hz Input (*Note 2)

Turn-on Time 5 Second Max. Full Load & 115Vac/60Hz Input

Note 1: Ripple voltage measurement is done with an oscilloscope set at 20M Hz bandwidth & output terminated with 0.1uf ceramic capacitor & 47uf low ESR electrolytic capacitor at full load & nominal line.

Note 2: Turn OFF at Vin 90° phase.

3.2 Output Protection : Short Circuit Protection: No damage to this power supply when output is shorted to GND.

4. Environment Specification :

4.1. Temperature : Operating : 0 °C to +40 °C Storage : -20 °C to +80 °C

4.2. Humidity : Operating : 10 % to 90 % RH Storage : 5 % to 95 % RH

5. EMI Standards :

5.1. Conduction : 5.1.1. It is refer to EN 55022, CISPR PUB 22. Class B

5.2. Radiation : 5.2.1. It is refer to EN 55022, CISPR PUB 22. Class B

5.3. Harmonic Current : 5.3.1. It is refer to EN 61000-3-2

5.4. Flicker Voltage : 5.4.1. It is refer to EN 61000-3-3

6. EMS Standards :

6.1. Electrostatic Discharge ESD : 6.1.1. It is refer to IEC 61000-4-2 6.1.2. Air Electrostatic Discharge : ±8KV 6.1.3. Contact Electrostatic Discharge : ±4KV



OP-04-300-04 V.:1.7 保存:7 年 PAGE 4

6.2. Radiated Immunity RS : 6.2.1. It is refer to IEC 61000-4-3 6.2.2. Radiated Susceptibility : 3V/m

6.3. Transient Burst (EFT) : 6.3.1. It is refer to IEC 61000-4-4 6.3.2. EFT Test : ±1KV

6.4. Surge : 6.4.1. It is refer to IEC 61000-4-5 6.4.2. differential mode Surge Immunity : ±1KV

6.5. Conducted Radio Frequency Disturbances Test CS : 6.5.1. It is refer to IEC 61000-4-6 6.5.2. Injected Current Susceptibility : 3Vrms

6.6. Power Frequency Magnetic Field Test : 6.6.1. It is refer to It is refer to IEC 61000-4-8

6.7. Voltage Dips : 6.7.1. It is refer to IEC 61000-4-11

7. Safety standards : Class II power

7.1 Hi-Pot Test : 7.1.1. In-Process : Primary to Secondary : 4242Vdc / 2 Second and 10mA Max.. 7.1.2. FQC (Final check) : Primary to Secondary: 4242Vdc / 60 Second and 10mA Max.

7.2 Safety & EMC & EMI conforming : The power supply is designed to conform with safety standards that are listed as below.

Type (Marking) Country/Region Standard

USA UL 60950-1 and UL 60065 UL/CUL(or CSA) Canada CAN/CSA C22.2 No. 60950-1 and

CAN/CSA-C22.2 No. 60065 FCC USA ANSI C63.4-2003;FCC Part 15 Class B

Energy Star USA ENERGY STAR Program Requirements for External Power Supplies (Version 2.0)

CEC California California Code of Regulations, Title 20, Sections 1601 through 1608(Phase 2<Level IV>)

CB IEC IEC 60950-1 and IEC 60065 GS Germany EN 60950-1 and EN 60065

73/23/EEC and the amendment directive: 2006/95/EC (IEC/EN 60950-1 or IEC/EN 60065) 89/336/EEC and the amendment directive:2004/108/EC (EN61000-3-2 & EN61000-3-3; EN55022 Class B & EN55024 or EN55013 & EN55020)

CE Europe

ErP Directive: 2009/125/EC and the Implementing Measures (EC)No 278/2009

CCC China GB4943; GB 9254 ; GB 17625 and GB8898;GB13837;GB17625.1

BSMI Taiwan CNS 13438; CNS14336 and CNS 14408; CNS14336; CNS13438



OP-04-300-04 V.:1.7 保存:7 年 PAGE 5

KC Mark Korea K60950-1 ;K00022;K00024 and K60065

K-MEPS Korea MKE’s Notification 2008-99

SAA Australia & New Zealand AS/NZS60950.1 and AS/NZS 60065

C-Tick Australia & New Zealand AS/NZS CISPR22 or AS/NZS CISPR13

MEPS Australia & New Zealand AS/NZS 4665.1

PSE Japan J 60950 ;J55001 and J 60065 ;J55013

VCCI Japan VCCI Class B

8. Environment Standard : 8.1. RoHS Directive 2002/95/EC 8.2. WEEE Directive 2002/96/EC ( Article 4 &6&10)

9. Mechanical :

9.1. Dimension : Refer to mechanical drawing for the details. 9.2. Net Weight : 120g Typical

Issue Date: Approved by : Checked by : Prepared by : APD Proprietary Information / Document : No publicity , transmission to third party or competitor is allowed without APD Prior written consent. 2010-7-6 彭勇

QUALSURE CONSULTANTS PO Box 80 Rosedale Vic. 3847 Australia

Phone +61 412 933497 Fax +61 3 5199 2544

Quality Systems International Permits Compliance Folders

A division of Blulen Pty Ltd (ACN 090692354) Registered Office 18 Hood Street Rosedale Vic. 3847 CF2716-1

12 November 2009 Ms Star He Asian Power Devices Inc. Dear Ms. He

LETTER OF AUTHORISATION

This letter authorises Asian Power Devices Inc., to label the product(s) listed below, with the C-Tick compliance mark as shown above and supplier number N136, subject to the following conditions: a. The units supplied are identical to those held by and described in the

compliance folder held by Qualsure Consultants. b. Qualsure Consultants assumes no responsibility in the retail supply, servicing

or repair of the listed product. c. Any modification to the listed product(s) voids this authorisation. d. This authorisation pertains only to the product(s) listed. e. This authorisation is valid until 12 November 2014 or the standard shown on

the declaration of compliance is rescinded whichever is the sooner. f. The product(s) listed, where necessary, hold and maintain an Australian

electrical safety certificate. g. Asian Power Devices Inc. takes responsibility and agrees to meet all costs in

any action relating from a breach of the conditions of this authorisation. h. Asian Power Devices Inc. agrees to supply to Qualsure Consultants the names

and addresses of all Australian importers if required by the relevant Australian authority.

i. Qualsure Consultants agrees to provide at no cost an agents’ letter directly to the importers of this product when requested to do so.

Product Trade Name Model Number

AC Adapter APD WA-08B05R, WA-08B05FN, WA-10I05R, WA-10I05FN,

WA-13A05R, WA-13A05FN The labelling and supply of the product with a C-Tick compliance label including the identifier N136 is agreement with the above conditions.

Gordon Slimmon. Director

QUALSURE CONSULTANTS A division of Blulen Pty Ltd (ACN 090 692 354) Registered Office 18 Hood Street Rosedale Vic. 3847 CF2716/3-1

Supplier’s declaration of conformity For compliance levels 1, 2 and 3 in Australia As required by notices under:

• section 182 of the Australian Radiocommunications Act 1992. Instructions for completion

• This completed form remains with the supplier as part of the documentation required for the compliance records. Do not return this form to the ACMA.

Supplier’s details Qualsure Consultants

(AGENT)

of 18 Hood Street Rosedale Vic.

ACMA supplier code number N136

Product details

Product description – brand name, type, model, lot, batch or serial number (if available)

Brand Name APD

Model Number WA-10I05R

Description AC Adapter Compliance with Radiocommunications (Electromagnetic Compatibility) Standard 2008

The above mentioned product complies with the requirements of the Radiocommunications (Electromagnetic Compatibility) Standard 2008. Evidence of compliance is demonstrated by test reports to the following applicable standards.

Applicable standards

Standard title, number and, if applicable, number of the test report

Standard Test Report Number AS/NZS CISPR 22:2009 SECE0910053 AS/NZS CISPR 13:2004 SECU0910053

Declaration

I hereby declare that the product mentioned above complies with the requirements of the Radiocommunications (Electromagnetic Compatibility) Standard 2008. All products supplied under this declaration will be identical to the product identified above.

Gordon Slimmon Director 12 Nov 09

Issue Date: 2009-11-12 Page 1 of 16 Report Reference # E168210-A94-UL

2010-10-26

Copyright © 2010

UL TEST REPORT AND PROCEDURE

Standard: UL 60950-1, 2nd Edition, 2007-03-27 (Information Technology Equipment - Safety - Part 1: General Requirements) CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 (Information Technology Equipment - Safety - Part 1: General Requirements)

Certification Type: Power Supplies for Information Technology Equipment Including Electrical Business Equipment

CCN: QQGQ, QQGQ7

Complementary CCN: Audio/Video Apparatus(AZSQ, AZSQ7)

Product: AC Adapter

Model: (1) WA-08B05FU, WA-08B05R (2) WA-10I05FU, WA-10I05R (3) WA-13A05FU, WA-13A05R (4) WA-10A06FU, WA-10A06R

Rating: (1) WA-08B05FU, WA-08B05R: I/P: 100-240 Vac, 50-60 Hz, 0.3 A Max. O/P: 5 Vdc, 1.5 A. (2) WA-10I05FU, WA-10I05R: I/P: 100-240 Vac, 50-60 Hz, 0.3 A Max. O/P: 5 Vdc, 2 A. (3) WA-13A05FU, WA-13A05R: I/P: 100-240 Vac, 50-60 Hz, 0.3 A Max. O/P: 5 Vdc, 2.5 A. (4) WA-10A06FU, WA-10A06R: I/P: 100-240 Vac, 50-60 Hz, 0.3 A Max. O/P: 5.5 Vdc, 1.81 A.

Applicant Name and Address: ASIAN POWER DEVICES INC 5 LANE 83 LUNG-SOU ST TAOYUAN CITY 330 TAIWAN

This is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the above referenced Standards. The products have been found to comply with the requirements covering the category and the products are judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on such products which comply with this Test Report and any other applicable requirements of Underwriters Laboratories Inc. ('UL') in accordance with the Follow-Up Service Agreement. Only those products which properly bear the UL Mark are considered as being covered by UL's Follow-Up Service under the indicated Test Procedure. The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety. Any information and documentation involving UL Mark services are provided on behalf of Underwriters Laboratories Inc. (UL) or any authorized licensee of UL.

Issue Date: 2009-11-12 Page 2 of 16 Report Reference # E168210-A94-UL

2010-10-26

Copyright © 2010

Prepared by: Billy Xiong

Underwriters Laboratories Inc.

Reviewed by: Cindy Liu / Rock Long

Underwriters Laboratories Inc.

Premio ETICA Y VALORES EN LA INDUSTRIA 2003 • Premio ETICA Y VALORES EN LA INDUSTRIA 2004

Av. Lomas de Sotólo 1097 • Col. Lomas de Sotelo -11200 México, D.F. • Tel. 5395 0777 • Fax 5395 [email protected] • www.nyce.org.mx

Organismo de certificación de producto acreditado por la Entidad Mexicana de Acreditación (ema)r NORMALIZACIÓN Y CERTIFICACIÓN

E L E C T R Ó N I C A . A . C

Certificado de Producto Nuevode Conformidad con FR4CER4C

Norma Oficial MexicanaCertificado No.: 1002CE14151

Normalización y Certificación Electrónica A.C. (NYCE), otorga el presente Certificado de Conformidad con

Norma Oficial Mexicana con base al informe de resultados de pruebas No. LT462210, emitido por el

laboratorio LABOTEC MÉXICO SC, con número de Acreditación y Aprobación EE-0062-046/08 en términos

de la Ley Federal sobre Metrología y Normalización.

De acuerdo al procedimiento PCPCER5C de NYCE y a la solicitud con No. de Referencia 14346E0210, se

otorga el presente certificado con verificación mediante pruebas periódicas a la empresa:INGENIERÍA JMR DE MÉXICO SA DE CV

ron domicilio f>rv EJE 6 SUR TRABAJADORAS SOCIALES NO 376 LOTE 4 COL.:MAGDALENA ATLAZOLPAC.P. 09410 MÉXICO DF,DELEG.:IZTAPALAPAR.F.C.UM0705031Y1

del siguiente producto:

Producto: ADAPTADOR DE calce

Marca: APD —

Modelo (s): WA-13A05FU; WA-13A05R; WA-10I05FU; WA-10I05R •

País de Origen: CHINA; CHINA (REPÚBLICA POPULAR) —

De conformidad con la Norma Oficial Mexicana NOM-001-SCFI-1993 "Aparatos Electrónicos - Aparatos electrónicos deuso doméstico alimentados por diferentes fuentes de energía eléctrica. Requisitos de seguridad y métodos de pruebapara la aprobación de tipo.", publicada en el Diario Oficial de la Federación del 13 de octubre de 1993. El presenteCertificado de conformidad se expide en México, D.F., el día 08-dic-2010, con vigencia de 1 (un) año, para los efectosque convengan al interesado. La validez de la vigencia estará sujeta al resultado del seguimiento correspondiente.

ATENTAMENTE

EN CASO DE EXISTIR UNA CONTROVERSIA,NYCE. A.C- ÚNICAMENTE RESPALDARA EL

ORIGINAL DEL CERTIFICADO

JUAN PABLO NAVA ORUBESUBDIRECTOR DE OPERACIONES

3

s

Certificó: Analizó: Sandra Quiroga Domínguezc

A S I A N P O W E R D E V I C E S I N C .

亞源科技股份有限公司APDAPD

- 1 -

Conformity Declaration For the following equipment:

AC ADAPTER (Product Name)

WA-10I05FU，WA-10I05R （ APD）

(Model Designation) / ( Brand Name )

is herewith confirmed to comply with all application provision of the Appliance Efficiency

Regulations, (California Code of Regulations, Phase 2<Level IV>Title 20, Sections 1601 through

1608) dated September 2007 in carrying out all testing pursuant to this application; For the

evaluation regarding the Directives, following test method were applied US EPA “Test Method for Calculating the Energy Efficiency of Single-Voltage External AC-DC and AC-AC Power Supplies” dated August 11, 2004.

The carried out on September 25, 2009 at Yang Ming Industrial Laboratory.

The following manufacturer / importer are responsible for this declaration: Asian Power Devices INC. (Company Name)

No. 5, Lane 83, Lung-Sou St., Taoyuan City, Taiwan. (Company Address) Person responsible for making this declaration: Rax Chuang (Name)

R&D Manager (Position/Title)

Shenzhen/ China December 23, 2009

(Place) (Date) (Legal Signature)

Declaration of Conformity

For the following Product : AC Adapter（Switching Power Supply） Model(s) : WA-10I05FG, WA-10I05FK, WA-10I05R

Manufactured at: F1: Yang Ming Industrial Bao An Maliu Village, Heng Gang Town, Long Gang District, Shen Zhen 518115, P. R. China

(Factories name and address)

We hereby declare, that the product above is in compliance with the essential requirements of the Low Voltage Directive (2006/95/EC) and Electromagnetic Compatibility Directive (2004/108/EC) by application of

EN 60950-1:2006/A11:2009 EN 60065:2002/A11:2008 EN 55022:2006/A1:2007 EN 55013:2001/A2:2006

EN 55024:1998/A2:2003 EN 55020:2007

EN 61000-3-2:2006/A2:2009 EN 61000-3-3:2008

and the Eco-Design Directive (2009/125/EC) implemented by Regulation (EC) No 278/2009 for no-load condition electric power consumption and average active efficiency of external power supplies. Affixing of CE Mark . The Technical documentation is kept at the below Manufacturer’s address. Asian Power Devices Inc. No. 5, Lane 83, Lung-Sou St., Taoyuan City 330, Taiwan FAX : 886-3-379-9263 / TEL : 886-3-379-9078 Manufacturer :

Asian Power Devices Inc. No. 5, Lane 83, Lung-Sou St., Taoyuan City 330, Taiwan

Shenzhen, 18 January, 2010 Thales Yang / Section Manager

(Place and date of issue) (Name and signature of authorized person)

Representative in the EU:

(Place and date of issue) (Name and signature of authorized person)

Product details

Declaration & Applicable standards

Representative in the EU

Model No.：：：：WAWAWAWA10101010IIII05050505 Sample Rev.：：：：X.0 Sample S/N：：：：21212121#,#,#,#,22222222####Description：：：：5555VdcVdcVdcVdc////2222AAAA □□□□Open frame ■■■■Adaptor □□□□ Other

Conclusion：：：：■■■■ PASS □□□□ FAIL Checked By:lizhisheng Tested By：：：：yangqingmeiyangqingmeiyangqingmeiyangqingmei1 Test Condition:

2.The criteria of pass or fail :

The MTBF should be more than100000 Hrs.

When the test result conform to Telcodia SR-332,the test item is passed.

3.Test Equipment and block diagram:

4. Test block diagram:

5. Test Result :

Tektronix 3034B EQ-M22-909

Chroma 61602 EQ-M02-984

Chroma 63030 EQ-MA1-960

EQ-MA8-906

Oscilloscope:

Ac source:

Electronic load:

Thermal recorder:

Ambient:

Input:

Output:

40℃℃℃℃90Vac~264Vac

5Vdc/2A

MTBF Test Report

638149.97Hrs

1567.03

754.15

42.78

427.32

0.46

107.83

175.75

MOSFETS

CMTBF REPORT LIST

0.65

Failure Rate (90V)Component

Capacitors

Failure Rate (264V)

28.71

39.47

48.19

54.08

655.62

28.88

205.78

Total λss 1002.64

MTBF

Inductive devices (Transformer)

997371.63Hrs

Resistors

Diodes

Microelectronic devices

Inductive devices (Choke)

Temperature chamber

AC Source EUT

Input Output DC Load

Thermal Recorder

AC

Source

EUT

Input Output DC Load

Oscilloscope

表单编号：ISO-10-600-17Rev.1.0 保存至机种停产后一年

Model No.：：：：WAWAWAWA10101010IIII05050505 Sample Rev.：：：：X.0

Description：：：：5Vdc/2A □□□□Open frame ■■■■Adaptor □□□□ Other

Conclusion：：：：■■■■ PASS □□□□ FAIL Checked By:lizhisheng Tested By：：：：yangqingmeiyangqingmeiyangqingmeiyangqingmeiStandard : Telcordia SR-332

Input : 90V/47Hz Output: 5Vdc/2A Test temperature: 40℃℃℃℃(1) Capacitors Location Rating Voltage

Rating

TemperatureCapacity (uf) Operating Voltage

Environment

Temperature

Operating

Temperature1 / ( λG *ΠQ *ΠS *ΠT *ΠE ) =MTBF(hrs)

C-AL 10uF 400V M YXA T 5 C RBC 10*16 CK1 400 105 10 131.0 40℃ 67.6℃ 15 1 0.661 3.325 1

C AL 22uF 50V M 5*11RL2RAD TAP 5mm Ch1 50 105 22 17.5 40℃ 71.2℃ 15 1 0.698 3.834 1


C-AL 330uF 25V M GLE T 5 C GCN 8*15 CE1 25 105 330 5.57 40℃ 71.9℃ 15 1 0.514 3.940 1


hrs

(2) Resistors Location Rating WattsRating

TemperatureRes. Ohms Operating Voltage

Environment

Temperature

Operating


R C. TF 1/4W 1.5 F 1206 Rs1 0.25 125 1.5 0.280 40℃ 80.4℃ 0.5 1 0.685 1.888 1

hrs

(3) Diodes Location Rating VoltageRating

Temperature

Rating

CurrentOperating Voltage

Environment

Temperature

Working


D WILLAS/IN4007 1A 1000V REC DO-41 T DB1 1000 175 1 126.0 40℃ 66.0℃ 6 1 0.338037 1.868958 1


D WILLAS/IN4007 1A 1000V REC DO-41 T Da1 1000 175 1 220.0 40℃ 82.9℃ 14 1 0.4439692 2.67214 1

D WILLAS/IN4007 1A 1000V REC DO-41 T Dh1 1000 175 1 48.8 40℃ 73.5℃ 6 1 0.2702305 2.199738 1

D WILLAS/SR-540 5A40V SCKY DO-201AD T DE1 40 150 5 17.7 40℃ 103.8℃ 6 1 0.8464112 3.977452 1

hrs

(4) MOSFETs Location Rating VoltageRating

Temperature

Rating


Environment

Temperature

Working


MOSFET UTC/2N60L 2A 600V N BULK TO-220F Q1 600 150 2 308.0 40℃ 81.9℃ 20 1 1.0325175 2.618689 1

hrs

(5) Microelectronic devices Location Rating VoltageRating

TemperatureOperating Voltage

Environment

Temperature

Working

Temperature1 / ( λG *ΠQ *ΠT *ΠE ) =MTBF(hrs)

IC PWM CNTL GRENERGY/GR8836CG SOT-26 SMD U1 26.5 150 17.5 40℃ 72.7℃ 46 1 7.1227333 1

IC LINEAR BCD/AS431AZ-E1 U2 125 40℃ 64.3℃ 46 1 4.4606442 1

IC PHO LITEON/LTV817M P=10mm CTR=C Pc1 100 40℃ 67.6℃ 15 1 8.185615 1

hrs

(6) Inductive devices LocationRating

Temperature

Environment

Temperature

Working


CHOCK LF1 120 40℃ 65.5℃ 19 1 1.5201575 1

hrs


Temperature

Environment

Temperature

Working


TX 137:9:22 FER EE19 1.85MH T1 110 40℃ 87.4℃ 19 1 2.0775618 1

hrs

Total MTBF = 1/ Total λss= hours

3.462E+07

Remark 6 : λSSi=λG *ΠQ*ΠT *ΠE (Failures/109 Hours), MTBF10 = 1/ λSSi*10

9 = 34,622,450

4.8735E+06

Remark 2 : λSSi=λG *ΠQ*ΠS*ΠT *ΠE (Failures/109 Hours), MTBF2 = 1/ λSSi*10

9 =

1.546E+09

2.492E+07

3.291E+07

2.804E+08

1,546,205,026.71

4.951E+07


9 = 20,752,276.77

2.638E+08

5.990E+07

2.541E+08

1,525,274.74Remark 5 : λSSi=λG *ΠQ*ΠT *ΠE (Failures/109 Hours), MTBF8 = 1/ λSSi*10

9 =

8.1444E+06

3.0521E+06

997371.63

18,492,205.50


9 = 25,333,340


9 =

1.849.E+07

2.533E+07

CMTBF Test Report


9 = 5,689,966.17

2.490E+07

3.034E+07

Sample S/N：：：：21212121#,#,#,#,22222222####3.114E+07

表单编号：ISO-10-600-17Rev.1.0 保存至机种停产后一年 2

Model No.：：：：WAWAWAWA10101010IIII05050505 Sample Rev.：：：：X.0

Description：：：：5Vdc/2A □□□□Open frame ■■■■Adaptor □□□□ Other

Conclusion：：：：■■■■ PASS □□□□ FAIL Checked By:lizhisheng Tested By：：：：yangqingmeiyangqingmeiyangqingmeiyangqingmeiStandard : Telcordia SR-332

Input :264Vac/63Hz Output: 5Vdc/2A Test temperature: 40℃℃℃℃(1) Capacitors Location Rating Voltage

Rating

TemperatureCapacity (uf) Operating Voltage

Environment

Temperature

Operating



C AL 22uF 50V M 5*11RL2RAD TAP 5mm Ch1 50 105 22 18.0 40℃ 73.9℃ 15 1 0.715 4.258 1




hrs

(2) Resistors Location Rating WattsRating

TemperatureRes. Ohms Operating Voltage

Environment

Temperature

Operating


R C. TF 1/4W 1.5 F 1206 Rs1 0.25 125 1.5 0.151 40℃ 70.7℃ 0.5 1 0.565 1.643 1

hrs

(3) Diodes Location Rating VoltageRating

Temperature

Rating


Environment

Temperature

Working




D WILLAS/IN4007 1A 1000V REC DO-41 T Da1 1000 175 1 478.0 40℃ 94.1℃ 6 1 0.9381926 3.325655 1

D WILLAS/IN4007 1A 1000V REC DO-41 T Dh1 1000 175 1 95.0 40℃ 71.3℃ 6 1 0.3089734 2.098606 1

D WILLAS/SR-540 5A40V SCKY DO-201AD T DE1 40 150 5 34.1 40℃ 107.2℃ 6 1 2.7794415 4.22582 1

hrs

(4) MOSFETs Location Rating VoltageRating

Temperature

Rating


Environment

Temperature

Working


MOSFET UTC/2N60L 2A 600V N BULK TO-220F Q1 600 150 2 559.0 40℃ 99.1℃ 20 1 2.8179227 3.651313 1

hrs

(5) Microelectronic devices Location Rating VoltageRating

TemperatureOperating Voltage

Environment

Temperature

Working


IC PWM CNTL GRENERGY/GR8836CG SOT-26 SMD U1 26.5 150 18.0 40℃ 75.2℃ 46 1 8.1516194 1

IC LINEAR BCD/AS431AZ-E1 U2 125 40℃ 66.7℃ 46 1 5.1108654 1

IC PHO LITEON/LTV817M P=10mm CTR=C Pc1 100 40℃ 69.9℃ 15 1 9.6051529 1

hrs


Temperature

Environment

Temperature

Working


CHOCK LF1 120 40℃ 65.1℃ 19 1 1.5109401 1

hrs


Temperature

Environment

Temperature

Working


TX 137:9:22 FER EE19 1.85MH T1 110 40℃ 93.5℃ 19 1 2.2514125 1

hrs

REMARK : Total MTBF = 1/ Total λss= hours638149.97

Sample S/N：：：：21212121#,#,#,#,22222222####


9 = 34,833,663

23,377,137


9 = 1,325,993.35

2.6668E+06

4.2535E+06

6.9407E+06

1.419E+07


9 = 2,340,167.90

2.936E+07

5.342E+07

1.377E+08

1.337E+08

3.483E+07

CMTBF Test Report


9 = 2,154,401,823.07

2.154E+09

2.199E+07

7.393E+06

2.191E+07

2.338E+07

5.992E+06

4.860.E+06


9 = 4,859,503.01

9,274,099.83

2.570E+08

表单编号：ISO-10-600-17Rev.1.0 保存至机种停产后一年

model no. wa-10i05rg-aaab customere. this authorisation is valid until 12 november 2014 or the...

Documents