Model: LLC-Wi-Fi-V01

Wi-Fi 3 in 1 Controller with RF Remote

Please read this instruction manual carefully before installing this product to ensure full

understanding of the installation specifications and to avoid unnecessary damage and additional

costs.

LED Lights Canada 800-677-2698

Edmonton, AB www.ledlightscanada.com

Product Description

WiFi-V01 is designed to control your LED lights with the use of free iOS or Android apps for your

smartphone or tablet. When installed the WiFi-V01 will create its own wireless network and will not interfere or

conflict with your existing home Wi-Fi network. One WiFi-V01 controller can be used as dimmer, CT

controller or an RGB controller by selecting the desires control interface in the app software. There is also a

DIY function which allows the user to create a personalized dynamic effect. In addition to being able to control

your lights via Wi-Fi this controller also comes with a RF Colour wheel remote control for use when a hand

held device is not convenient. This model designed for 12-24V DC constant voltage led products, such as led

flex strip, led kitchen lighting, puck lights etc.

Technical parameters

1. Controller

Working temperature -20-60℃ Working voltage DC12~24V

Power consumption <3W Connect method Common anode

Wi-Fi brightness level 100 Wi-Fi speed level 100

Remote control brightness level 32 Remote control speed level 100

N.W. 150g G.W. 230g

Case dimension L108*W63*H28mm Box dimension L109*W55*H56mm

Output 3 channels Output current ≤4A(each channel)

Wi-Fi frequency 2.4G RF remote control frequency 433.92Mhz

Output gray scale 256 Memory function support

Receiving sensitivity 802.11b:DSSS（-5dBm） 802.11b:CCK(-10dBm) 802.11g:OFDM(-15dBm)

Output power 12V: ≤144W 24V: ≤288W

2. RF remote control

Working temperature -20-60℃ Power supply AAA*3

Standby current 7uA Working voltage 1.5V*3

Working current 10mA Remote control distance Up to 30m

RF frequency 433.92Mhz Power consumption 0.04mW

3. Software

Name FreeColor V1.0 Platform Android 2.1 or above, IOS4.3 or above, with the Wi-Fi function

Size Android(661KB) , IOS(Being certified in)

Category Communication Language English

Features

1. Support both Wi-Fi control of Apple products (iPod, iPad, iPhone), Android mobile devices like Samsung,

HTC, and RF wireless remote control.

2. With the 3-in-1(Dimming, CT, RGB) Apple/Android software, one device can be used to control different

lighting applications.

3. Memory function to save scenes anytime anywhere for next play.

4. Wi-Fi-V01 is designed for constant voltage led products, working voltage automatically senses DC12-24V.

5. Wi-Fi control based on 2.4GHZ frequency, RF remote control based on 433.92MHz.

Instruction for use

1. FreeColor V1.0 software installation and SSID (system settings ID) reset.

1.1 Software installation

Android: The app can be downloaded for free in Google Play by searching “FreeColor”

iOS: The app can be downloaded for free in by searching “Freecolor” from App store.

1.2 Resetting SSID

If there is more than one Wi-Fi-V01 in close proximity you can reset the SSID for the devices so they will

avoid interfering with each other. There are 16 separate SSID numbers available to choose.

The default SSID number for all devices is HX001, a device with WIFI function will be needed when

resetting the SSID. The SSID range is: HX000-HX016. Follow these steps to set the SSID number:

① Check that the Wi-Fi-V01 is properly connected and then turn on the power

② Open the Wi-Fi device in your browser by entering “192.168.2.2”in the address bar. This interface will

display

Enter the default Username: admin and the default password: admin. Click “Login”.

③ Reset the SSID as shown in the page as below:

④ If necessary, set the linking password for more security.

A. Select the “Security Mode”: WEP64.

B. Type 10 hexadecimal ASCII codes into “Key Index 0”, which corresponding five characters, and it will

be the linking password. The common hexadecimal ASCII code as below:

For instance:

Password ASCII code

88888 3838383838

12345 3132333435

abcde 4142434445

After setting, click “Apply” to finish.

⑤ If necessary, set a new “Username” and password in the page as shown below:

After setting, click “Apply” to finish.

2. FreeColor V1.0 software operating illustration

1) Check the Wi-Fi-V01 and LED products are connected properly and then turn on the power supply

2) After step 1), open the Wi-Fi setting interface on the device with Wi-Fi enabled and find the Wi-Fi

network named “HX---”. When found connect to it.

3) Open the “FreeColor” app to start operation. There is also a “WIFI Connection Setting” page in the

software.

4) “FreeColor” is a 3-in-1 controller (Dimmer, CT, RGB) software. The RGB scene is the default app

interface. Enter the “System Setting” page to change the selection. The interface is shown below:

Click go to “System Settings” page as pictured below, and click “OK” to finish the “Type Setting”:

RGB Interface CT Interface Dimming Interface

5) Here we will use the RGB interface as example（Dimming and CT are same）

① RGB control interface:

No. Button Function

1 DIY mode saving key After DIY, click this key to save. Saving the DIY mode in anytime

2 ON/OFF Turn on/off Wi-Fi-V01

3 Colour value Display the R/G/B gray value, “L”: the current brightness level.

4 Colour board Select any static color mode from the board.

5 Brightness slip Slip to adjust the current light brightness, 100 levels in total.

6 System setting Click to system setting page, set the WIFI connection and select

the application scene (Dimming, CT, RGB).

7 DIY memory function Go to DIY modes select page. Display all of the DIY modes.

8 Dynamic modes Go to select the dynamic modes.

9 Current application show Display the current application scene.

② Dynamic modes control interface:

MODE：select the different dynamic mode, such as flash, fade and etc;

SPEED：select the speed level of the dynamic mode，100 levels in total;

EFFECT：select the different effect based on the different mode.

③ DIY modes manage interface：

This page displays all of the DIY modes which have been saved, up to 12 modes in total.

④ System Setting interface:

System Settings：Wi-Fi connection Setting;

Product Attributes Settings：Type Setting (RGB/CT/DIM).

3. Controller operation illustration

1) Connection illustration

2) Working state instruction

Indicator light Function table

Power If the power indicator light stays lit the power supply is working normally

Wi-Fi Long-time bright in normally connection, when receives Wi-Fi signal data

flicker.

RF Flickering when receives correct control signal from Wi-Fi device or RF

remote control; and die out in free time.

RESET Key：Press and hold at least 5 seconds to erase all Wi-Fi data and return the controller

to the factory default.

1. For Dimming: CH1→V-、CH2→V-、CH2→V-、V+→V+;

2. For CT: CH2→WW、CH1→WC、V+→COM;

3. For RGB: CH3→B、CH2→G、CH1→R、V+→COM.

3) Controller connection

① RGB connection: CH3→B, CH2→G, CH1→R, V+→COM；

② CT connection: CH2→WW, CH1→WC, V+→COM；

③ Dimming connection: CH1→V-, CH2→V-, CH2→V-, V+→V+；

4. RF remote control operation illustration

1) RGB full touch remote control:

Each Key Function is described below:

Name of key Instruction Remarks

ON/OFF ON or OFF in any time

Pause Pause or Continue

Mode The mode will go to next per set each time

you touch the key There are 9 preset modes in total.

Speed/Brightness + The Speed/Brightness will increase when

you touch the key each time

Speed for dynamic modes, Brightness

for static modes.

Speed/Brightness - The Speed/Brightness will decrease when

you touch the key each time

Speed for dynamic modes, Brightness

for static modes.

Colour Ring Touch any colour which you want

9 preset modes listed below:

No Patterns Remarks

1 Static warm white Brightness is adjustable, speed is not adjustable

2 Static cool white

3 White breath

Speed is adjustable, brightness is not adjustable

4 Seven-colour jumpy changing

5 Seven-colour smooth

6 Seven-colour fade

7 R/B crossfade

8 B/G crossfade

9 G/R cross fade

2) CT full touch remote control:

RF full touch remote control with one colour temperature ring and 5 function buttons.

Each Key Function is described below:

Name of key Instruction Remarks

ON Turn on the device in any time

OFF Turn off the device in anytime

Mode The mode will move to next, when

touch the key each time 9 modes in total.

Speed/Brightness + The Speed/Brightness will increase

each time the key is touched

Speed for dynamic modes,

Brightness for static modes.

Speed/Brightness - The Speed/Brightness will decrease

each time the key is touched

Speed for dynamic modes,

Brightness for static modes.

Colour Ring Touch any color temperature which is

wanted.

9 preset modes listed below:

NO Patterns Remarks

1 Static warm white and cool white Brightness is adjustable, speed is not adjustable

2 Warm white and cool white flash

Speed is adjustable, brightness is not adjustable

3 Warm white and cool white fade

4 Warm →cool flash

5 Warm →cool fade

6 Static warm white，cool white flash

7 Static warm white，cool white fade

8 Static cool white，warm white flash

9 Static cool white，warm white fade

3） Dimming full touch remote control:

RF full touch remote control with one dimming ring and 5 function buttons.

Each Key Function is described below:

Name of key Instruction Remarks

ON/OFF ON or OFF in any time

Pause Pause or Continue

Mode The mode will move to next, when

touch the key each time 3 modes in total.

Speed/Brightness + The Speed/Brightness will increase

each time the key is touched

Speed for dynamic modes,

Brightness for static modes.

Speed/Brightness - The Speed/Brightness will decrease

each time the key is touched

Speed for dynamic modes,

Brightness for static modes.

Colour Ring Touch any colour temperature which

you want

3 preset modes listed below:

NO Patterns Remarks

1 Static 100% light Brightness is adjustable, speed is not adjustable

2 flash Speed is adjustable, brightness is not adjustable

3 fade

To conserve the batteries the RF remote will enter a sleep mode after 20 seconds. To wake up the

remote touch any of the 5 buttons. This will reactivate the RF remote.

Notes

1. Supply voltage of this product is DC12V~24V DC. Do not connect to line voltage.

2. Lead wires should be connected correctly as illustrated in the wiring diagram. Wiring the controller

incorrectly may damage the controller and the LED lights.

3. Overloading may destroy the controller. Maximum load is 144W at 12V, 288W at 24V

4. Warranty of this product is 2 years when installed according to these instructions and not overloading

the controller.

Troubleshooting

Problems Possible Cause PossibleSolution

1. Lamp does not light after

power is turned on

Power cord is not properly

connected, or there is no output

from the driver

Connect the power cord properly

or restore the power to the driver

Lamp power cord is not

connected or short circuit

Connect lighting power cord

2. The controller does not work

after connecting the load.

The connected load is too large

and has burned in some of the

components of the controller

Replace the controller

3. FreeColor is not available The connection between

controller and Wi-Fi device is not

working

Check the connection and try

again. Confirm the compatibility

between the software and the

Wi-Fi device.

4. Wi-Fi device cannot remote

control the controller

Wi-Fi network is not stable or off

line

Check the network connection or

shorten the distance between

controller and the Wi-Fi device.

If you require any assistance in setup this device please contact customer service at 800-677-2698 or e-mail

support@ledlightscanada.com. Call us, we are here to help.