Model CMF417-2.5 Fine Filtration Plus Microbiological Protection!

Product recommendations are based on known application requirements and product technical data. They are offered for further consideration only. The user is responsible for testing and verifying that the product is suitable for the application.

Targeted Application - Retention of Bacteria (including Legionella), Virus & protozoans for pretreatment, post treatment or stand alone technology. Proactive Protection from Boil Order alerts, membrane breaches/failure. Prefilter with fine filtration or RO water for long life!

Health Safety and the Environment - CMF media is based on the naturally occurring element boehmite which has no known HSE issues. Boehmite has long been used as an additive to food products, digestive analgesics, industrial applications and as an adjuvant for human vaccines. The media has passed testing to NSF/ANSI standard 42 & 61 forpotable water contact, USP Class VI testing and endotoxin testing.

Electroadsorptive technology for water purification and filtration - The 0.8mm thick pleated media construction offers a torturous flow path and far more surface area than compet-itive charged membrane products, for unmatched miro-organism retention capacity and filter life. The positive surface charge around each alumina fiber resists dumping or shed-ding of captured micro-organisms, even if the media becomes compromised. This solves a potential problem seen by other membranes, including those used in nanofiltration,ultrafiltration or microfiltration.

CMF Charged Membrane Filter Performance• Certified Performance testing, evaluation & verfication completed at US EPA testing &evaluation facility Cincinnati, OH, WQA Certified under NSF P231 and Legionella testingby BCS Labratory. CMF microbial media - NSF/ANSI Std 42 & 61, USP Class VI

Filter Protecion• Antimicrobial agent is blend throughout the filter media that is only activated when micro-organisms are present to protect. This FDA/EPA registered productprevent odors/fouling of media. Also allows for spend cartridges to be disposed of as normal waste.

FDA Standards• All materials are FDA listed as acceptable for potable and edible liquid contact per CFRTitle 21 section 177-1520

Material of Construction• Filter medium: CMF microbial media & poloypropylene spunbonded support • Support components: Polypropylene

Market Applications• Food & Beverage• Bottled Water• Drinking Water • Process Water

Applications - Water Quality Issues Microbial contaminants Bacteria, virus & cysts

Legionella*Other contaminants reduced by CMF cartridge**Silca, Iron, Tannic, Humic & Fulvic Colloids (Acids)

*Test conducted by BCS Labratory **Cartridge life will varies due to load factors for these contaminants

Every HFH-38QC High flow Exclusive Quick Change filter head is complete with built in quick connect inserts (inletand outlet) to connect 3/8” tubing with mounting bracket installed.

Filter head has been Tested for material safety and structural integrityby WQA. Twin and Triple Filter Head Assemblies are available.

Caution: Using tubing not certified for food and beverage applicationsduring installation will void the warranty!

Waterline Technology®961 N. Main St., Ste 102 • P.O. Box 396Mansfield, OH 44903

Phone: 419-529-3949 • Sales/Technical Service: 1-800-522-3949Fax: 419-529-8484 • www.waterlinetechnology.com

Model CMF417-2.5Microbiological Retention Point of Use Filter

Certified PerformanceCMF Media is Certified to NSF/ANSI Std 42 & 61 by WQAGold Seal Program all other materials conform to NSF/ANSIStd 42 requirements.

CMF system design has been performance tested, evaluated and verified by the USEPA T & E Facility & 3rd PartyIndependently tested to:

Single Twin Series MS2 Bacteriophage Virus >99.9% >99.998%Cryptosporidium 99.9992% >99.9992%RT Bacteria >99.99% >99.9999%Legionella >99.9% >99.9999%

Operating SpecificationsMaxTemperature: 100°F Flow Rate: 2.5 gpm Max Pressure 125 psiInitial pressure drop : <1 psi inital, 35 psi end of life

Product performance is dependent upon incoming waterTwin Series design Certified to USEPA Microbial PurifierStandard and NSF P-231standard!

See performance test data sheets for individual contaminant'sand reduction performance.

Product performance is dependent upon incoming waterconditions.

Twin series is for temporary use on water suspected ofbeing potable during emergencies, such as Boil OrderAdvisories.

The contaminant's or other substances removed orreduced by this water filter device are not necessarily inyour water.

Warranty:12 months from date of purchase or 24months from date of manufacture.

Market Applications

Designed, Manufactured & Performance tested in the U. S. A. by Waterline Technology All rights reserved Manufactured at EPA Est. # 070932-ID-001 Protected under patents 6,695,891,6,926,826, 6,977,006, 7,172,693, 7,476,314 and other patents pending Copyright 2017

With a CMF cartridge included in your treatment train it provides a FinalBarrier of Protection from the Microbiological organisms that may be in yoursource water supply.

Home, Office Business & Industrial Applications for Superior Drinking Waterfiltration and a safe guard from the unknown microbial issues facing yourwater supplies.

Single cartridge design is for Use on potable water supplies, Public or Privatewater supplies requiring continuous purification, and the Twin Series design isfor temporary use on non-potable water supplies suspected of being potable,excluding converting waste water to microbiologically potable water. .

CMF™ Charged Membrane Filtrationthe inside story

Mechanical Filtration

A Mean pore size 1.5 micron is provided viaglass structures which have Alumina fibersgrafted to material. There are 400 such

structure layers within the 0.8 mm thick material which createsa torturous flow path.Adsorption / Retention of Organisms

The Alumina Fibers have a Zeta potential of51 millivolts. This charge extends >1micron along each structure to create a

nearly total capture of the pore openings. This provides aretention efficiency that approachs nano filtration with very low pressure requirements.

Strong Positive Zeta potential provides Electro adsorptive reten-tion >= .002 micron rating. .

Influent Water Quality Guidelines To Obtain Maximum Log Reduction Value: The CMF Series cartridges may require pretreatment for particulates, color, iron, manganese, & total organic carbon.

Treatment must be installed upstream to maintain the life ofcartridge. . Pretreatment Guidelines for Microbial Efficiency and extended service life of cartridge(s). Turbidity <=1 NTUTOC <50 mg/LpH 5-9.5 Iron <0.3 ppmManganese <0.05 ppmTDS <30 g/LTSS Low as possible to extend service life

Use one of our Fine filtration cartridges to provide the pre treatment requirements with the exception ofpH, Iron, & manganese.

Capacity Retention of Bacteria, Virus, CystsExceeds 1 million organisms per gpm of design flow rate.

Challenged during testing to > 250 million organisms pergpm of design flow rate MS2 bacteriophage testing!