model-based definitionptcuser.nl/.../mbd-design-with-2d-and-3d-detailing.pdf · design with 2d and...
TRANSCRIPT
![Page 1: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/1.jpg)
MODEL-BASED DEFINITIONDESIGN WITH 2D AND 3D DETAILING
Michael FridmanProduct Manager for MBD & Detailing, PTC
November 29th , 2019
![Page 2: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/2.jpg)
22
AGENDA• MBD-MBE opportunities
• Creo MBD evolution and annotation types
• Creo 6.0 core MBD enhancements
• Future MBD Roadmap and Creo 7.0 outlook
• Questions
![Page 3: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/3.jpg)
3
MBD-MBE OPPORTUNITIES
![Page 4: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/4.jpg)
4
• Model Based Definition:– An annotated model and its
associated data elements that define the product in a manner that can be used effectively without a drawing graphic sheet.
• Model Based Enterprise:– An organization that uses
model-based definitions for the purpose of commission, operation, service, and decommission of a product.
UNDERSTANDING MBD & MBE
Annotated 3D
CAD Model
![Page 5: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/5.jpg)
5
*Selected feedback from pilots and real world use by PTC customers
MBD offers the potential for significant time and cost savings
MBD-MBE VALUE OPPORTUNITIES
Annotated 3D CAD Model
With fully semantic &
correctly applied GD&T
Faster Product Development
Faster Manufacturing and Inspection
Reduced Errors and Non-
conformances
40% faster
documentation creation
Proven Benefits *
60% reduction
in First article inspection time
90% less
product non-conformances
![Page 6: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/6.jpg)
6
CREO MBD EVOLUTION & ANNOTATION TYPES
![Page 7: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/7.jpg)
7
MBD IN CREO – EVOLUTION IN RECENT RELEASES
Creo 4.0
Streamlined annotation workflows(modernized standalone anno.)
Improved support for ASME/ISO standards
Full semantic definition
Semantic PMI with STEP AP242
GD&T Advisor Integration Creo 6.0
Creo 4.0 MORs& Creo 5.0
Annotation conversion
Improved anno. UX
Semantic query
Modernized annotation cont’d
Improved annotation features
Anno. support for advancedmodeling concepts (DSF & MC)
![Page 8: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/8.jpg)
8
Standalone annotations Annotation Elements owned by features
In the ribbon:
In the model tree:
CREO ANNOTATION TYPES OVERVIEW
![Page 9: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/9.jpg)
9
• Annotations that were modernized in Creo 4.0:
• Common capabilities for the modernized standalone annotations and for all annotations elements owned by annotation features:
– Similar graphical appearance and basic properties
STANDALONE ANNOTATIONS VS. ANNOTATION FEATURES
![Page 10: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/10.jpg)
10
• Annotations that were modernized in Creo 4.0:
• Common capabilities for the modernized standalone annotations and for all annotations elements owned by annotation features:
– Similar graphical appearance and basic properties
– Manage their references
STANDALONE ANNOTATIONS VS. ANNOTATION FEATURES
![Page 11: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/11.jpg)
11
• Annotations that were modernized in Creo 4.0:
• Common capabilities for the modernized standalone annotations and for all annotations elements owned by annotation features:
– Similar graphical appearance and basic properties
– Manage their references
– Add and manage their parameters
STANDALONE ANNOTATIONS VS. ANNOTATION FEATURES
![Page 12: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/12.jpg)
12
• Annotations that were modernized in Creo 4.0:
• Common capabilities for the modernized standalone annotations and for all annotations elements owned by annotation features:
– Similar graphical appearance and basic properties
– Manage their references
– Add and manage their parameters
– Designate as control characteristics to Windchill
STANDALONE ANNOTATIONS VS. ANNOTATION FEATURES
![Page 13: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/13.jpg)
13
• Annotations that were modernized in Creo 4.0:
• Common capabilities for the modernized standalone annotations and for all annotations elements owned by annotation features:
– Similar graphical appearance and basic properties
– Manage their references
– Add and manage their parameters
– Designate as control characteristics to Windchill
– Errors about reference failures are reported in the notification center
STANDALONE ANNOTATIONS VS. ANNOTATION FEATURES
![Page 14: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/14.jpg)
14
• Annotations that were modernized in Creo 4.0:
• Common capabilities for the modernized standalone annotations and for all annotations elements owned by annotation features:
– Similar graphical appearance and basic properties
– Manage their references
– Add and manage their parameters
– Designate as control characteristics to Windchill
– Errors about reference failures are reported in the notification center
– Can be queried with Semantic Query• Available for the modernized annotation types only
STANDALONE ANNOTATIONS VS. ANNOTATION FEATURES
![Page 15: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/15.jpg)
15
• Special capabilities of Annotation Features owning Annotation Elements:
– Annotation grouping & organization
STANDALONE ANNOTATIONS VS. ANNOTATION FEATURES
![Page 16: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/16.jpg)
16
• Special capabilities of Annotation Features owning Annotation Elements:
– Annotation grouping & organization
– Support for feature operations• Pattern
• Copy
• Suppress
• UDF
• Etc.
STANDALONE ANNOTATIONS VS. ANNOTATION FEATURES
![Page 17: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/17.jpg)
17
• Special capabilities of Annotation Features owning Annotation Elements:
– Annotation grouping & organization
– Support for feature operations• Pattern
• Copy
• Suppress
• UDF
• Etc.
– Annotation Elements can be propagated via data sharing features(merge, copy geometry, etc.)
STANDALONE ANNOTATIONS VS. ANNOTATION FEATURES
![Page 18: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/18.jpg)
18
STANDALONE ANNOTATION EVOLUTION
Standalone Annotation Types
Creo 4.0
Capabilities
Support for DS features
Future Releases
Special Feature Operations
Suppress/Exclude
Creo 6.0
GroupingCreo 5.0
Future looking information subject to change without notice
![Page 19: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/19.jpg)
19
CREO 6.0 CORE MBD ENHANCEMENTS
![Page 20: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/20.jpg)
20
• Creation & Editing– Context sensitive format ribbon for notes
– Snapping guides for tangent/normal placement on edges
– Improved dragging behavior for ‘on item’ type note
– Consolidated legacy dialogs of properties & format commands into modern UI tools• Tip: Legacy note properties dialog may be restored with the
following config: “hide_pre_creo6_note_properties yes*/no”
• Standalone Annotation Behavior– Can have parameters
– Can be designated as Control Characteristic for MPMLink
– Issues are reported in Notification Center
MODERNIZATION OF NOTES
Benefits
• Easier note creation workflows
• Contextual ribbon
• Consolidated formatting options
• Modern standalone capabilities
![Page 21: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/21.jpg)
21
• Semantic Definition Support– Reference collector button in the ribbon
– Attachment reference is automatically added
– Can have multiple semantic references
– Supports semantic query highligting
• Modernized notes are also available for drawings
MODERNIZATION OF NOTES
![Page 22: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/22.jpg)
22
• New “My symbols” section is available in the note’s text editor dialog
• My symbols list shows the user the most recently used symbols and being updated as the user inputs additional symbols
MOST RECENTLY USED SYMBOLS BAND IN NOTE’S TEXT EDITOR
Available with:
Creo 6.0.1.0
![Page 23: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/23.jpg)
23
• New ‘Exclude‘ state for annotations with missing references– Excluded annotations are not displayed in graphics
• Configurable behavior– Annotations with regeneration failure/warning are being highlighted on screen (legacy behavior)
OR
– Annotations being excluded and not visible on screen (new behavior)
IMPROVED PARENT/CHILD BEHAVIOR FOR ANNOTATIONS
Missing References
Pre Creo 6.0 behavior
Creo 6.0 behavior (Optional)
![Page 24: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/24.jpg)
24
• Supported for:– Modernized standalone annotations
– Annotation feature owned, annotation elements
• Annotations may be excluded due to parent feature being:– Excluded by family table
– Excluded by Simplified representation
– Suppressed
– Deleted
– Section which is deactivated & hidden • Supported for: Modernized standalone annotations
except for ordinate dimension
• Controlled with 4 new detail options:– excl_annotations_of_suppressed/deleted/excluded/section
IMPROVED PARENT/CHILD BEHAVIOR FOR ANNOTATIONS
Benefits
• Easier management of annotation visibility
• Failed annotations can be removed from screen
![Page 25: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/25.jpg)
25
• New column for model tree: “Annotation status”, informs about the status of the annotation:– Excluded
– Missing references
– Failed
– Unconverted
– Not available – for standalone non modernized type annotations
• Search tool updated for annotation status query– Can help find all annotations that are sharing a
selected status
IMPROVED PARENT/CHILD BEHAVIOR FOR ANNOTATIONS
![Page 26: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/26.jpg)
26
• Stacked annotations propagation is improved
• Example for external merge:
• Manual selection of a stack member annotation will propagate the whole stack
• Supported for annotations feature owned, annotation elements
ENHANCED PROPAGATION OF ANNOTATION ELEMENTS FOR DATA SHARING FEATURES
Benefits
• More robust annotation propagation
• Help maintain design intent
![Page 27: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/27.jpg)
27
• Annotation Elements (AE) can be moved to other Annotation Features (AF) of the same top model without actual editing any AF
• Annotations can be selected from Model tree/Detail tree/Graphics
• AEs that belong to different AF can also be relocated by this enhancement
• Stacked Annotation will move together to the target AF
ENHANCED FLEXIBILITY WHEN WORKING WITH ANNOTATION FEATURES
Also Available with: Creo 4.0 M080 / Creo 5.0.5.0
![Page 28: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/28.jpg)
28
• Drawing name can now automatically be extracted from the model name
AUTOMATIC DRAWING NAMING
Benefits
• Saves time
• Eliminates typing errors
![Page 29: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/29.jpg)
29
• Modelcheck can report about MBD related situations in your model:
– Annotations that are not referencing any surfaces
– Surfaces not referenced by any GD&T
– Annotations not found on any combined state or annotations that are shown in more than one combined state
– Combined State Names do not adhere to pre-defined naming convention
• User can selectively decide which annotations will not be reported
NEW MBD CHECKS IN MODELCHECK
Benefits
Help users to verify their design intent & identify errors
![Page 30: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/30.jpg)
30
FUTURE MBD ROADMAP & CREO 7.0 OUTLOOK
![Page 31: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/31.jpg)
31
MBD IN CREO – EVOLUTION IN RECENT RELEASES
Creo 4.0
Streamlined annotation workflows(modernized standalone anno.)
Improved support for ASME/ISO standards
Full semantic definition
Semantic PMI with STEP AP242
GD&T Advisor Integration Creo 6.0
Creo 4.0 MORs& Creo 5.0
Future Releases
Annotation conversion
Improved anno. UX
Semantic query
Modernized annotation cont’d
Improved annotation features
Anno. Support for advancedmodeling concepts (DS & MC)
Standards
Productivity & UX
Future looking information subject to change without notice
Symbols
![Page 32: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/32.jpg)
32
• Updated compliance to ISO 1101:2017 & ASME Y14.5-2018 standards:– New palette symbols
– Syntax checker update
– Model level setting for tolerance standard
– Additional gtol indicator values
– Gap control for indicators
– Support for multiple normal/tangent leaders in drawings
– Improved spacing alignment for composite gtols
CREO 7.0 – IMPROVED STANDARDS COMPLIANCE
Future looking information subject to change without notice
![Page 33: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/33.jpg)
33
CREO EZ TOLERANCE ANALYSIS INTEGRATION
Future looking information subject to change without notice
Powered by
• Capabilities: – Define & visualize multiple 1-D tolerance stack-up
analysis using existing model surfaces, assemblyconstraints and GD&T
– Evaluate impact of GD&T stack-ups on areas of concern using common statistical & quality metrics
– Generates detailed html reports
– Indicates when more complex analysis is advised(CETOL 6σ)
– Removes the need of working with spreadsheets
• Integration details:– Co-existing with TAE for Creo 4.0 M110 / 5.0.6.0 / 6.0.3.0 integrations
– TAE will be retired with Creo 7.0.0.0
– EZ Tolerance analysis will be available with the existing TAE license
![Page 34: MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo](https://reader036.vdocuments.site/reader036/viewer/2022081410/609e36f209c5c02f147ac72d/html5/thumbnails/34.jpg)