model 6cc10 - mestek, inc....

4
Model 6CC10 SD-6CC10-2 Air-Cooled Portable Air Conditioner Submittal Data Model Number 6CC10 Cooling Capacity 10,000 Btu/hr Cooling Test Conditions 95°F Voltage/Phase/Hz 115/1/60 Amperage 10 Fuse Size 15 Amps* LCDI Plug Configuration NEMA 5-15P Power Cord Length 10′ Refrigerant Type R410A Dimensions 20″H x 17.2″W x 24″D Net Weight 121 Lbs Shipping Weight 128 Lbs Condensate Tank Capacity NA SPECIFICATIONS ADDITIONAL SPECIFICATIONS SAFETY DEVICES Compressor Overload Protection Anti-freezing Thermistor Automatic Restart (Power Interruption) Compressor Time Delay Program High Pressure Switch Project: Date: Location: Customer: Engineer: Submitted By: For: Reference Approval Construction Unit Designation: Schedule Number: 260 North Elm St. Westfield, MA 01085 Phone: 413-564-5520 Fax: 413-564-5815 www.Koldwave.com *Time delay fuses and circuit breakers are recommended STANDARD FEATURES 10,000 Btu Cooling Capacity Spot-Cool / Room-Cool Thermostat Settings Internally Insulated with Fiberglass Insulation Thermostatic Control with Multi-Speed Fan Separate Direct Drive Fan Motors R410A Refrigerant Includes Built-in Condensate Pump 115V/1 Phase Optional Directional Nozzle (1) Heavy Duty Twin Wheel Casters for Portability Self-Diagnostic System Off Timer Washable Filters Auto / Manual Fan Speed Option Humidity Control Function Ambient Temperature Range 64 - 113°F Setting Temperature (Room Cool) 64 - 86°F Setting Temperature (Spot Cool) 32 - 86°F Application Area Ft² (Room Cool Mode) 258 Refrigerant Type / Ounces R410A / 16 Design Pressure High/Low 465 / 250 PSIG Indoor Air Flow High/Low 320 / 220 CFM Hot Air Duct Diameter 6" Maximum Exhaust Duct Length 10' Condenser Air Flow 750 / 700 CFM FLA 10 Amps Max Duct Length: Cold Air Supply 30 ft. Max Duct Length: Hot Air Discharge 10 ft. Duct Connection Hot Air Discharge 12 in. Drain Type Auto pump

Upload: vanthien

Post on 24-May-2018

215 views

Category:

Documents


2 download

TRANSCRIPT

Model 6CC10 SD-6CC10-2Air-Cooled Portable Air ConditionerSubmittal Data

Model Number 6CC10Cooling Capacity 10,000 Btu/hrCooling Test Conditions 95°FVoltage/Phase/Hz 115/1/60Amperage 10Fuse Size 15 Amps*LCDI Plug Configuration NEMA 5-15PPower Cord Length 10′Refrigerant Type R410ADimensions 20″H x 17.2″W x 24″DNet Weight 121 LbsShipping Weight 128 LbsCondensate Tank Capacity NA

SPECIFICATIONS ADDITIONAL SPECIFICATIONS

SAFETY DEVICES• Compressor Overload Protection • Anti-freezing Thermistor• Automatic Restart (Power Interruption)• Compressor Time Delay Program• High Pressure Switch

Project: Date:Location:Customer:Engineer:Submitted By:For: Reference Approval ConstructionUnit Designation:Schedule Number:

260 North Elm St.Westfield, MA 01085

Phone: 413-564-5520Fax: 413-564-5815

www.Koldwave.com

*Time delay fuses and circuit breakers are recommended

STANDARD FEATURES• 10,000 Btu Cooling Capacity• Spot-Cool / Room-Cool Thermostat Settings• Internally Insulated with Fiberglass Insulation• Thermostatic Control with Multi-Speed Fan• Separate Direct Drive Fan Motors• R410A Refrigerant• Includes Built-in Condensate Pump• 115V/1 Phase• Optional Directional Nozzle (1)• Heavy Duty Twin Wheel Casters for Portability• Self-Diagnostic System• Off Timer• Washable Filters• Auto / Manual Fan Speed Option• Humidity Control Function

Ambient Temperature Range 64 - 113°FSetting Temperature (Room Cool) 64 - 86°FSetting Temperature (Spot Cool) 32 - 86°FApplication Area Ft² (Room Cool Mode) 258Refrigerant Type / Ounces R410A / 16Design Pressure High/Low 465 / 250 PSIGIndoor Air Flow High/Low 320 / 220 CFMHot Air Duct Diameter 6"Maximum Exhaust Duct Length 10'Condenser Air Flow 750 / 700 CFMFLA 10 AmpsMax Duct Length: Cold Air Supply 30 ft. Max Duct Length: Hot Air Discharge 10 ft. Duct Connection Hot Air Discharge 12 in. Drain Type Auto pump

Model 6CC10-Submittal Data

Control Panel

1 2

5

3 4

687

1. Power2. Blower3. Spot/Cool4. Room/Cool5. Set Temperature6. Alarm7. Current Temperature8. Target Temperature

Control Panel Key Buttons:

2

CONTROL PANEL

COMPONENT PARTS

DIMENSIONS (In Inches)1.18

17.30

1.37 1.02

0.47

20

0.98

21.41

24.05

0.85

7.87

15.19

4.68

13.38

7.12

Display /Control Panel

Cool Air Outlet

Evaporator / FilterCondenser / Filter

Power cord Holder

Power cord

Electrical Access PanelDrain Pump Hose

Connector

Exhaust Air Outlet

Rear and Left Side View Front and Right Side View

Model 6CC10-Submittal Data

3

ASSEMBLY

Figure 6 - 3 unit stacked application.

Figure 5 - hanging assem-bly attachment.

Figure 4 - Front and Right Side View

Eva intake air outlet

Figure 3 - server rack kit attachment.

Rack di user

Universal adjust

Rack assembly

Figure 2 - portable kit

Cool air duct

Caster

Handle

attchment.

POWER CORD HOLDER1. Take out the cord holder from the accessory box.2. Place the cord holder on the le side of unit.

htiw xob yrossecca fo edisni desolcne( swercs esU .3cord holder) to install the cord holder in the unit as shown in Figure 1.

Figure 1 - power cord holder attachment.

4

Model 6CC10-Submittal Data

Part Name Part Number16 FT Temperature sensor SA076-4007

Remote controller (26 ft with line) SA076-4006

Replacement washable filter, evaporator KWPCFLT-06E

Replacement washable filter, condenser KWPCFLT-07C

OPTIONAL ACCESSORIES KITS

Stack kit includes: bracket attachment SA076-4014

Portable kit Includes: (4) casters, handles, nozzle SA076-4013

Server rack kit, includes: diffuser, rack attachment SA076-4012

Hanging kit Includes: ECAP and condenser air outlet, SA076-4015

6" Exhaust flange 81.0200.34

Accessory Parts