model 132 - headline filters · Ø 63.50 2 mounting holes 12 deep on 38mm centre-s @ 900 to ports 1...
TRANSCRIPT
![Page 1: Model 132 - Headline Filters · Ø 63.50 2 mounting holes 12 deep on 38mm centre-s @ 900 to ports 1 npt ports 25-64-xx element section a-a drain 55mm min clearance for bowl removal](https://reader034.vdocuments.site/reader034/viewer/2022042420/5f372a457a73c57bf450f452/html5/thumbnails/1.jpg)
Replacement Parts List 25-64-xx Disposable Filter ElementSS-25-64-xx Stainless Steel Filter Element PT-25-64-xx PTFE Filter Element
TR130 Tie Rod (A) ER130 Element Retainer (B) SC130 Support Core (Not Pictured) SSB 130 316L Stainless Steel Bowl (C) MB130 Mounting Bracket (Not Pictured)
Oxygen Cleaning Service Available Note – Please replace “xx” with micron rating or grade
Available O-Rings GN130 NitrileGV130 Viton (Standard) (D) KZ130 Kalrez™GS130 Silicone
**For a Solid PTFE Gasket – Order a 132S**
Please Note: Exotic Materials are available, for Alloy C-276 (132H) and for Alloy 400 (132M).
Headline Filters Limited Mill Hall Business Estate Aylesford
Kent, ME20 7JZwww.headlinefilters.com
Model 132 THE COPYRIGHT OF THIS DRAWING IS RESERVED BY HEADLINE FILTERS. IT IS ISSUED ON CONDITION THAT IT IS NOT COPIED, REPRODUCED OR DISCLOSED TO A THIRD PARTY EITHER WHOLLY, OR IN PART WITHOUT CONSENT IN WRITING.
Material:Head: 316L Stainless Steel Bowl: 316L Stainless Steel
Internals: 316L Stainless Steel Standard Gasket / O-ring: Viton
Drain Type: 1/4" NPT Maximum Temperature: 200°C Maximum Pressure: 100 Bar Internal Volume: 110 cc Weight: 700g DO NOT SCALE DRAWING
IF IN DOUBT ASK Drawing No. HF4/0853
Model: 132 (1/2” NPT)