mobile computing and ad hoc network
TRANSCRIPT
Introduction Mobile Computing
What is Mobile Computing?
Mobile Computing Device
Display Only Info Pad model: limited portable processing Like a cordless phone. Laptop Computer ThinkPad model: significant portable
processing, operates independently of wireless infrastructure.
Personal Digital Assistant [PDA] : Somewhere between these extremes. a handheld device that combines computing, telephone Internet and networking. features.
Mobile computing device
Mobile Stations
A mobile stations (MS) comprises all user equipment and software needed for communication communication with a mobile network. The term refers to the global system connected to the mobile network, i.e. mobile phone or mobile computing connected using a mobile broadband adapter. The is the terminology of 2G system like GSM.
GSM network comprises of many functional units. These can be broadly divided into
The mobile stations The base Station subsystem The network switching subsystem
GSM Architecture
Mobile Station(MS)
The Mobile Station is made up of two entities: Mobile Equipment (ME) Subscriber Identity Module (SIM)
Mobile Equipment (ME)
Portable, vehicle mounted, hand held device.Uniquely identified by an IMEI
(International Mobile Equipment Identity).Voice and data transmission.
Subscriber Identity Module (SIM)
Smart card contains the International Mobile Subscriber Identity (IMSI)
Allows user to send and receive calls and receive other subscribed services
Protected by a password or PIN Can be moved from phone to phone – contains key
information to activate the phone
Base Station Subsystem (BSS)
It consists of 2 major hardware components: Base Transceiver Station (BTS) Base Station Controller (BSC)
Base Transceiver Station (BTS)
The BTS contains the RF components that provide the air interface for a particular cell .
Encodes, encrypts, multiplexes, modulates and feeds the RF signals to the antenna.
Communicates with Mobile station and BSC.
Consists of Transceivers (TRX) units.
Base Station Controller (BSC)
Provides the control for the BSS.
Communicates directly with the MSC.
May control single or multiple BTS.
In charge of handovers, frequency hopping, exchange functions and control of power level of BTS.
Network Switching Subsystem(NSS)
The system contains the following functional units
Mobile Switching Center (MSC) Home Location Register (HLR) Visitor Location Register (VLR) Authentication Center (AUC) Equipment Identity Register (EIR) Operation and maintenance center (OMC)
Mobile Switching Center (MSC) Central component of NSS. MSC performs the switching functions. Each MSC provides service to MS located within a
defined geographic coverage area.
Home Location Register (HLR)Stores information about each subscriber that
belongs to its MSC in permanent and temporary fashion.
As soon as mobile subscriber leaves its current local area, the information in the HLR is updated.
Database contains IMSI, prepaid/postpaid, roaming restrictions and supplementary services.
Visitor Location Register (VLR) The Visitor Location Register (VLR) contains the
information about subscriber parameters and location information for all mobile subscribers currently located in the geographical area controlled by that VLR.
Authentication Center (AUC) It is used for security purposes. Authentication is a
process to verify the subscriber SIM. AUC & HLR collectively authenticate the subscribers.
Equipment identity register (EIR) Stores all devices identifications registered for this network. Database that is used to track handsets using the IMEI.
White or Valid list Grey or Monitored list Black or prohibited list
Operation and maintenance center (OMC) The Operation and maintenance Center (OMC) is the centralized
maintenance and diagnostic heart of the base station system (BSS).
It allows the network provider to operate, administer , and monitor the functioning of the BSS.
Stations Flow Diagram
Roaming Overview
Roaming is an ability to access mobile data and voice services even if subscriber is outside the coverage area of HOME Network.
It is possible via using VISITED Network services.
To provide roaming facility to subscribers, operators should have roaming agreement with the other operators in different places.
Benefit of GSM technology in Roaming
GSM Roaming, which involves roaming between GSM networks, offers the convenience of a single number, a single bill and a single phone with worldwide access to over 191 countries.
The convenience of GSM Roaming has been a key driver behind the global success of the GSM Platform.
Roaming overview
Cell phone
Switch
City 2 (Visited Area) Subscriber is on
Roaming.
City 1 (Home Area) Subscriber’s own area where they
are using its own providers services
Switch Cell phone
Home Operator - Hutch Area Visited
Operator’s Area (Roaming
Partner of Hutch)
MSC
Hutch Network Infrastructure Hutch
Subscriber
Roaming Agreement Present between Hutch and
other Operators
Hutch Subscriber but using other operator
services for Roaming purpose
MSC
Other operators Network Infrastructure
Roaming Scenario’s
Caller - Hutch Roamer
Other Operators NE
City 2 (Visited Area) Subscriber is on Roaming.
City 1 (Home Area) Subscriber’s own area where
they are using its own providers services
Hutch NE
Receiver of Hutch
Home Operator - Hutch Area Visited Operator’s Area
(Roaming Partner of Hutch)
HUTCH MSC
Hutch Network Infrastructure
Roaming Agreement Present between Hutch and
other Operators
Hutch Subscriber but using other operator
services for Roaming purpose
MSC
Other operators Network
Infrastructure
Hutch User Receiving Hutch Roamer Call
Scenario 2- When roamer makes calls to his Home Network (HPLMN), he obviously knows that he is temporarily out of his home network and thus his calls are routed through his temporary home network ie. visited network (VPLMN).
Inbound and Outbound Roaming
Assuming – Airtel as a home operatorInbound Roaming - Customers of other operator roaming in Airtel area and using Airtel infrastructure then this activity is called inbound roaming. Only those customers can roam in Airtel network whose operator has Inbound Roaming agreement with Airtel.
Outbound Roaming - Outbound Roaming refers to Airtel customers roaming in network of other operators area. Customers of Airtel can roam in network of other operators with whom Airtel has Outbound Roaming agreement.
Wired Vs. Mobile Networks
Wired Networks- high bandwidth- low bandwidth
variability- can listen on wire- high power
machines- high resource
machines
Mobile Networks- low bandwidth- high bandwidth
variability- hidden terminal
problem- low power machines- low resource machines
Types of Wireless Devices
LaptopsPalmtopsPDAsCell phonesPagersSensors
Advantage of Wireless Networks
Flexible: Radio waves can penetrate the obstacles. Sender and receiver can be placed any where.
Mobility: Data can be access from any location. Robustness : Can survive in disaster (Earthquake,
military operations) Scalable: Can be configured in variety of topologies. Easy Installation Less Cost
Disadvantage of Wireless Networks
Quality of Service: Lower Bandwidth Lower Data Transmission Rate High Error Rates Interference Higher Delay
Application of Mobile Computing
For Estate Agents In courts In companies Stock Information Collection/Control Credit Card Verification Taxi/Truck Dispatch Electronic Mail/Paging
Future Aspects 3G or 3rd generation mobile telecommunications is a
generation of standards for mobile phones and mobile telecommunication services.
GPS (Global Positioning System) The Global Positioning System (GPS) is a space-based satellite navigation system that provides location and time information in all weather, anywhere on or near the Earth.
Long Term Evolution (LTE) LTE is a standard for wireless communication of high-speed data for mobile phones and data terminals. Its related with the implementation of forth Generation (4G) technology.
WiMAX (Worldwide Interoperability for Microwave Access) technology.
Near field communication (NFC)
conclusion
Mobile computing has severe limitations- however, it is far from impossible, and
technology improves all the timeLots of challenges- some have (good) solutions, many others
are still waiting to be solved
Ad Hoc Network
Introduction to Ad Hoc network
It is a type of MHWNs. Nodes in the network are mobile in general. The wireless hosts in such networks, communicate with each other
without the existing of a fixed infrastructure and without a central control.
A mobile ad-hoc network can be connected to other fixed networks or to the Internet.
Most of the Ad-Hoc networks use the allocated frequencies for the Industrial, Scientific and Medical (ISM) band.
Flow diagram of Ad Hoc Network
START
NODE SEND THE SIGNAL TO FIND THE NO.OF OTHER NODES WITHIN RANGE
SYNCHRONIZATION B/W NODES
SENDER NODE SEND MASSAGE TO RECEIVER NODE
RECEIVING NODE SEND BACK READY SIGNAL
WAIT FOR SOME TIME
IT RECEIVING NODE READY
COMMAND BEGINGS
TERM PROCESS
STOP
YES NO
Applications of AdHoc network
Group of people with laptops and they want to exchange files and data without having an access point.
Incase if we need to exchange information and the network's infrastructure has been destroyed.
It is suitable for military communications at battlefield where there is no network infrastructure.
Sharing the internet
Connected to the internet
Advantages of AdHoc Network
Ad-hoc networks can have more flexibility.It is better in mobility.It can be turn up and turn down in a very short time.It can be more economical.It considered a robust network because of its non-hierarchical distributed control and management mechanisms.
Thank you
QUESTIONS ?