Mobil DTE FM SeriesFood Machinery Lubricants

Product DescriptionMobil DTE FM Series oils are high performance lubricants designed to satisfy a wide range of multi-use equipmentrequirements for the food processing and packaging industry. These lubricants are qualified as NSF H1 typelubricants and also comply with Title 21 CFR 178.3570 by the Food and Drug Administration (USA) for lubricantswith incidental food contact. The lubricants are tasteless, odourless, premium quality lubricants formulated withnon-toxic NSF/FDA food grade additives and base oils. The additive system provides good wear protection,excellent oxidation stability and protection against rust. They provide good system cleanliness, long oil/filter life,and optimum equipment protection. The Mobil DTE FM Series oils are excellent gear, bearing and circulatingoils. They are also suitable for handling the critical requirements of hydraulic system components such as closeclearance servo-valves and the high accuracy numerically controlled (NC) machine tools. These products meetthe most rigorous performance requirements of a wide range of system and component manufacturers usingvarious multi-metallurgy designs allowing a single product with outstanding performance characteristics.

The Mobil DTE FM Series oils have high ratings in the FZG Gear Test demonstrating their excellent protectionagainst wear and scuffing. This allows their use in systems other than hydraulics that may contain gears andbearings. The naturally high viscosity index of the base oils ensures outstanding performance over a widetemperature range.

Features and BenefitsAdvantages and Potential BenefitsFeaturesAllows use in food packaging and processing applicationsNon-Toxic FormulationReduces wearExtends equipment lifeVery Good Anti-wear PropertiesProvides long oil and equipment lifeExtends filter lifeExcellent Oxidation StabilityPrevents internal hydraulic system corrosionReducesnegative effects of moisture in systemsProvides corrosionprotection of multi-metallurgy component designs

High Level Corrosion Protection

Multi-service applications - One product can replaceseveralMinimises inventory requirementsReducedpotential for product misapplication

Meets a Wide Range of equipment requirements

Reduces foaming and it's negative effectsExcellent Air Separation CharacteristicsProtects systems where small quantities of moisture arepresent Readily separates larger quantities of water

Very Good Water Separation Properties

Applications• Suitable for multi-service applications in the lubrication of machinery used in all food processing industries,

fish processing and met packing plants• Excellent gear, bearing, circulating system and hydraulic oils• Compressors and vacuum pumps handling air and inert gasses• Air line lubricators

1 of 3

• Systems requiring a high degree of load-carrying capability and anti-wear protection• Mobil DTE FM 220, 320 and 460 are recommended for freezer plants and for outdoor applications due to

their low temperature properties and high temperature stability• Machines employing a wide range of components using various metallurgy

Specifications and Approvals

MobilDTE FM680

MobilDTE FM460

MobilDTE FM320

MobilDTE FM220

MobilDTE FM150

MobilDTE FM100

MobilDTE FM68

MobilDTE FM46

MobilDTE FM32

Meets or Exceedsthe followingindustryspecifications

XXXXXXXXXFDA 21 CFR178.3570

XXXXXXXXNSF H1

Typical Properties

MobilDTE FM680

MobilDTE FM460

MobilDTE FM320

MobilDTE FM220

MobilDTE FM150

MobilDTE FM100

MobilDTE FM68

MobilDTE FM46

MobilDTE FM32

220150100684632ISO GradeViscosity, ASTM D445

670.0439.5325.8214.3155.596.768.545.531.9cSt @ 40º C61.243.434.224.517.010.98.76.85.5cSt @ 100º C15915214814311897101105106Viscosity Index,

ASTM D 22700.8530.8520.8520.8540.8690.8780.8730.8680.862Specific Gravity @

15.6º C/15.6º C,ASTM D 4.52

1A1A1A1A1A1A1A1A1ACopper StripCorrosion, ASTM D130

PassPassPassPassPassPassPassPassPassRust CharacteristicsProc. A, ASTM D665

-39-36-30-21-12-18-12-9-12Pour Point, ºC,ASTM D 97

278284272246250246228226212Flash Point, ºC,ASTM D 92

12+12+12+12+12+12+12+12+11FZG, DIN 51354,Fail Stage

0.300.300.250.250.260.250.250.250.254-Ball wear, ASTMD 4172, Scar Dia,20Kg, 54º C, 1800rpm, 1 hr, mm

2 of 3

Health and SafetyBased on available information, this product is not expected to produce adverse effects on health when usedfor the applications referred to above and the recommendations provided in the Material Safety Data Sheet(MSDS) are followed. MSDS's are available upon request through your sales contact office, or via the Internet. Thisproduct should not be used for purposes other than the applications referred to above. If disposing of usedproduct, take care to protect the environment.

The Mobil logotype, the Pegasus design and DTE are trademarks of ExxonMobil Corporation, or one of itssubsidiaries.

ExxonMobil Lubricants & SpecialtiesAll products may not be available locally. For more information, contact your local sales office or visit www.exxonmobil.com.ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override orsupersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil affiliate entities. Due to continual productresearch and development, the information contained herein is subject to change without notification. Typical Properties may vary slightly.© 2001 Exxon Mobil Corporation. All rights reserved.

3 of 3