mms and wap settings for windows mobile

8/8/2019 MMS and WAP Settings for Windows Mobile

http://slidepdf.com/reader/full/mms-and-wap-settings-for-windows-mobile 1/22

1

MMS and WAP Settings for Windows mobile

(I mate +HTC + Qtek+ O2+ T-Mobile)

-To configure The MMS and The WAP automatically go to page (2) (Suitable with Windows Mobile 6 and above)

- To configure The MMS and The WAP Manually go to page (10)

(Suitable with Windows Mobile 5 and older)



2

Configure The MMS and The WAP automatically

1-Click start

2-Choose Setting



3

3-Select Connection

4-Select Connection Setup



4

5-Select the Operator

A-The country choose Oman

B-The Operator choose Mobile

C-click ok

6-Select Yes



5

7- Wait to complete the Setting

8-Click Restart to finish the configuration



6

8-GO connection to Add the Access Point ,the User name and PasswordFor Wap service



7

9-Click Manage existing connection

10-Click Edit



8

11-Click Next

12-Change the access point from wap to taif

Then Click Next



9

13- Change the User name and the Password from wap to taif

Then Click Next

Then start send/receive MMS

and

browsing the wap



10

Configure The MMS and The WAP Manually

1-MMS

1-Click start Then Choose Setting

2-Select Connection



11

Tap Connection

3-Select Add a new modem connection



12

4- Enter the name for the connection

example: MMS

Select a modem from the dropdown menu: Cellular Line (GPRS)

Then Tap on Next

5- Type the Access point name: mms

Then Tap on Next



13

6- Enter the User name: mms & Password: mms

Then Tap on Finish

7- Go to Messages

Tap Menu Then Tap MMS Configuration



14

8-Tap Servers

Then Tap new

9-Enter the server name :Oman MMS

Gateway: 192.168.203.35Port Number : 9201

Server address :

http://mmsc.omanmobile.om:10021/mmsc

Connect via : My Work Network

Then tap OK





15

9-Select oman MMS then click Set As DefualtThen OK

Then start send/receive MMS



16

2-WAP

1-Click start Then Choose Setting

2-Select Connection



17

Tap Connection

3-Select Add a new modem connection



18

4- Enter the name for the connection

example: WAP

Select a modem from the dropdown menu: Cellular Line (GPRS)

Then Tap on Next

5- Type the Access point name: taif

Then Tap on Next



19

6- Enter the User name: taif & Password: taif

Then Tap on Finish

7-Go Back To Connection Tap Set up my proxy server



20

8- Keep the 2 boxes ticked

Enter the following Proxy server: 192.168.203.34

Then Press advanced

9- Tap the HTTP bar



21

10- Enter the server: 192.168.203.34 and the Port :8080

Tap Ok

11- Tap the Socks bar



9- Delete the Server and Port numbers

Then tap Ok

Then you can start browsing the wap

Done by :

Jamal Al Abri

[email protected]

mailto:[email protected]



mms and wap settings for windows mobile

Documents