Note : Bidder must answer with YES or NO in the “BIDDERS OFFER” Field

:Equipment Distribution Locations م.الملكة رانيا

qf742/3rev. c/modified 10/4/2019

Ministry of Health Directorate of Biomedical Engineering

Technical Specifications

Item Description: Hemodialysis Unit

Item No.(1)

Class No.: (11-218)

Qty.(4)

No. Technical Specifications Min MOH Requirement Bidder

Offer

1. Manufacturer Please specify manufacturer and country of origin

& country of manufacturer

2. Model number Please specify model number

3. Safety standard FDA Approval or CE marking

4. Dialysate delivery :

- Degassing

Included

- Proportioning system Volumetric or servo-controlled

- Temperature control (C°) 35 to 39

- Temperature alarm limit (C°) ± 1 C° of set temperature

- Conductivity range (mS/cm) 12.5 to 15.5 approx.

- Flow (ml/min) 300 to 700

- Trans membrane pressure

(mmHg)

Approx (0 to +450)

- Sodium therapy (Profile) Included

- Bicarbonate dialysis Included

- Ultra filtration removal (L/hr) 0 to 3, include (UF profile)

5. Bypass indicator Included

6. Blood leak detector Included

7. Blood circuit :

- Venous clamp

Included

- Arterial pressure reading

(mmHg)

Approx (-300 to +150)

- Venous pressure reading

(mmHg)

Approx (0 to +400)

- Blood pump range (ml/min) 50 to 500

- Heparin pump range (ml/hr) 0.1 to 10 approx.

- Air / foam detector Included

8. Disinfection program

1. Rinse

2. Hot rinse is preferable

3. Disinfection and decalcification with

chemicals

4. It must be mandatory rinse after

each disinfection process , even , in

case of power failure during

process

Note : Bidder must answer with YES or NO in the “BIDDERS OFFER” Field

:Equipment Distribution Locations م.الملكة رانيا

qf742/3rev. c/modified 10/4/2019

Cont. … Hemodialysis Unit

No. Technical Specifications Min MOH Requirement Bidder

offer

9. Displayed parameters :

- Display Type

LCD or CRT is preferable

- Dialysate pressure

- Temperature

Preferable

Included

- Transmembrane pressure Included

- Conductivity Included

- Flow rate Included

- Elapsed time )Preferable)

- Remaining time Included

- Other parameters Please specify if there are more

- Language Specify

10. Loss of water alarm Included

11. Internal Diameter of blood pump

segment

Please specify the range

12. Alarm actions :

- Blood leak detector - Stop blood pump , clamp line & alarm

- Air / Foam detector - Stop blood pump , clamp line & alarm

- Arterial / Venous pressure

(high / low)

- Stop blood pump & alarm

- Temperature (high / low) - Bypass and alarm

- Conductivity (high/ low) - Bypass and alarm

13. Operation - Compulsory self test (Diagnostic program)

before each dialysis

14. Battery Backup - Included

15. Application - Acetate and bicarbonate mode

- Double needles

16. System It should be open system , operate with all

types dialyzers and disposables , in case of

closed system refer to special conditions

17. Other option Mention and specify price

18. Blood pressure monitor Included

19. On Line clearance monitor

(KT/V)

Included

20. Construction - Mobile

- 4 Antistatic and swiveled castors

21. Maintenance software Allow connecting PC to machine by

interface socket and make diagnostic

for all parts ( troubleshooting )

22. Power supply 220 V ± 5% / 50 Hz

Note: Bidder must answer with YES or NO in the “BIDDERS OFFER” Field

:Equipment Distribution Locations م.الملكة رانيا qf742/3 rev. c/16-436/ mod 7-12-2011

Ministry of Health Directorate of Biomedical Engineering

Technical Specifications

Item Description: Dialysis Chair

Item NO :(2)

Class No. : ( 16-436 )

QTY:(4)

No. Technical Specifications Min MOH Requirement Bidder

offer

1. Manufacturer

Please specify manufacturer and

country of origin

2. Model Number

Please specify model number of the

offered equipment

3. Safety standard FDA Approval or CE marking

4. Construction - The chair must not contain any

wooden parts

- Leather or water proof and cover all

mattress

- Motors must be covered properly

5. Leg rest and backrest adjustment

separately

Electrically (by remote )

6. Height of Seat Part without the

mattress

Not less than ( 50 ) cm

7. Armrests The distance between them (55-60cm)

,and must be adjusted , with safe tilt

and lock

8. Armrest width Not less than 15cm

9. Armrest length Not less than 50cm

10. Foot rest support

Pillow

Included and must be adjusted

Included

11 Overall length Not less than 210cm

12. Load lifting Not less than 130Kg

13. Width Not less than 55cm

14. Cleaning and disinfection Easy for all parts

15. Castors 4 antistatic Castors and all swivel

with two lockable (brake) at least

16. Power supply 220 V ± 5% / 50 Hz

Note : Bidder must answer with YES or NO in the “BIDDERS OFFER” Field

:Equipment Distribution Locations م.الملكة رانيا

qf742/3 rev. a /27-12-2016

Ministry of Health Directorate of Biomedical Engineering

Technical Specifications

Item Description: Digital Dialysis Chair Scale

Item No:(3)

Class No. : ( )

QTY (1)

No. Technical

Specifications

Min MOH Requirement Bidder

offer

1. Manufacturer

Please specify manufacturer and country of origin

2. Model Number

Please specify model number of the offered

equipment

3. Safety standard FDA approval or CE marking

4 Design Heavy duty and high quality finishing

5 Construction - Digital scale included

- Large LCD display, tilt able either side

- Rechargeable battery& charger included

- Auto zero, auto-off scale display

- Structure made from S.S. or better

- Heavy Duty&High Quality Finishing

- Weighing platform can carry not less than

250kg ±5%

- Can be used with standard wheel chairs

with large & easy access platform (up to 90

x 90 cm dimensions)

- Must have fine sloped rampsfrom either

side with easy access & maneuvering

- Platform is made from easy washable &

disinfect able material

6 Unit Selection Criteria Should be according to a seen & tested sample

that should comply with the above specifications

Note: Bidder must answer with YES or NO in the “BIDDERS OFFER” field.

Equipment Distribution Locations: مستشفى الملكة رانيا

qf742/3 rev. a /27/1/2020

Ministry of Health

Directorate of Biomedical Engineering

Technical Specifications for Medical Equipment

Item Description: Portable Water Treatment Unit for Hemodialysis Machines

Item NO (4) Class No.: ( (

QTY (1)

No. Technical Specifications Min MOH Requirement Bidder

offer

1. Manufacturer

Please specify manufacturer and country

of origin

2. Model Number

Please specify model number of the

offered equipment

3. Safety standard FDA approval or CE marking

4. Design Compact Size & Heavy Duty

5. Type - Portable Water Treatment Unit

for Hemodialysis Machines

- Simple to operate, Silent, easy

to move

6. Cleaning & Sterilization Automatic Flushing before every

use to eliminate bacteria growth

7. Water Flow

Approx. 60 L/h , 1.5 bar counter

pressure

8. Feeding Circulation system

9. Built-in Components

- Filters

- Softener

- R.O

- Conductivity Sensor

- Valve

- Pumps

- U.V Lamp

-biological filter

-tank approx. 25L stainless steel 316

-pressure gauge

10. Indicators Included

11. Construction: frame &casing stainless steel 316

12. Power Supply

220 V / 50 Hz