mining solutions - nidec-avtron.com€¦ · mining solutions engineered for the ... odp and tefc...
TRANSCRIPT
Mining SolutionsEngineered for the Long Run
Nidec Provides Your MineRugged and Reliable Equipment specifically designed for the mining industry
Engineered Solutions for critical mining applications
Around the Clock Support to minimize machine downtime
Extensive and Experienced engineering, service and support staff
Proven Applications Nidec equipment is installed throughout the world at over 300 mines
Open Communication Interfaces to existing mine-wide networks utilizing high speed Ethernet connections
Upgrade Packages engineered for easy replacement of obsolete drives and controls
Remote Diagnostic Capability to maximize machine performance and minimize maintenance costs
Digital Drive SystemsADDvantage-32 Plus™ Products• DC drives (5-10,000 HP) • 6/12 pulse firing modules • Generator field supplies • Motor field supplies • Sync motor field controllers
ACCel500™ Products• AC drives (5-2,000 HP)• Active front ends• Common bus inverters• Liquid cooled inverters
Engineered Solutions• PLC upgrades• Operator interfaces• Reactive power compensation
Distributed ControlNidec’s drive systems utilize Ethernet communications to integrate our intelligent drives with industry standard PLCs and HMIs. Whether a new installation or an upgrade, we build systems to your specifications. With Nidec Industrial Solutions drive systems, the choice of PLC and HMI brand is always yours.
Our vendor independent open architecture allows our drive systems to blend into your existing control strategy.
Multi-Vendor SupportRockwell Automation General Electric Modicon / Schneider
Ethernet IPTM Ethernet Global Data® Modbus® TCP
Remote Devices On-Board Devices
RPC
ADD-32+ADD-32+
Hoist Crowd/Propel
ADD-32+
Swing
ADD-32+GigabitEthernet
DRIVE & PLCProgramming
Terminal
PLC
ENET
ENET
I/O
MCCI/O
CAB/CHAIRI/O
PLC/HMI ETHERNET
DRIVE SYSTEM ETHERNET - 100 MB Fiber
Shovel Drive Control System
I/O I/O
MINEVIEW
MachineRoom
OperatorsCab
Factory Support
Internet VPN
MineNetwork
EngineeringOffice
Maintenance
BaseRadio
RemoteViewRadio
EthernetSwitch
ManagedEthernetSwitch
#1
ManagedEthernetSwitch
#1
• Reduces troubleshooting time• Minimizes required system spares• Reduces overall training cost
• Maximizes your investment in programming tools• Reduces operator learning curve
AC MachinesThe U.S. MOTORS® brand of high performance commercial and industrial motors is designed to help industry reduce energy consumption and comply with EISA regulations. The line includes upgraded Open Drip-Proof and Totally Enclosed motors that meet or exceed NEMA Premium® requirements.
TITAN® Horizontal• Three Phase, ODP, WPI, WPII, TEFC and Hazardous Location• 150 – 4000 HP• 3600, 1800, 1200, 900, 720 and 600 RPM• 449 – 9608 Frame• 460 – 6900 Volts
Vector Duty• Three Phase, TENV and TEBC• 1 – 300 HP • 143 – 449 Frame• 3600 and 1800 RPM• Constant torque near zero RPM
Inverter Duty• Three Phase, ODP and TEFC• 1 – 200 HP• 3600, 1800 and 1200 RPM• 143 – 447 Frame• Meets NEMA®† MG1 Part 31 requirements for inverter duty
Vertical Pump Motors• Three Phase, WPI, WPII, TEFC and Hazardous Location• 3 – 4000 HP• 3600, 1800, 1200, 900, 720, 600 and 514 RPM• 182 – 9608 Frame• Designed for high or normal thrust• Available in Vertical HOLLOSHAFT® and Vertical Solid Shaft
ACCU-Torq® 2000:1Constant Torque
With over 100 years of combined experience in motor and generator manufacturing, Nidec Industrial Solutions is the expert in special application machines.
Our DC motors and generators come in 22 different shaft heights and nearly 100 different frame sizes to cover all applicable industry applications.
DC Machines
Industrial Power Rectifiers
Power rating:2 - 6,000 kW (at 150 r/min in tandem)
Voltage:up to 1,000 V
Frame size:80 - 900 mm
Power rating:up to 500 kW
Voltage:up to 500 V
Frame size: 804 - 824(split frame) 810 - 816(laminated frame)
Comply with AISE Standards
Despite the considerable growth in the use of AC drives over the years, DC machines continue to be used in a variety of markets thanks to their intrinsic value.
SilcoMax - Air and water cooled designs - Integrated electrode control for arc furnaces - Current rating: 10 – 120 kA - Voltages: up to 1600 volts SilcoMax Light - 6 pulse reaction std, 12 pulse optional - Current rating: 8 – 50 kA - Voltages: up to 1000 volts
SMARTach IITM
AV685 - The Toughest Hollow Shaft Encoder Built!Shaft mounted version eliminates failure prone couplings, misalignment problems and premature bearing failure.
SMARTach II encoders survive the worst conditions: dust, dirt, liquid sprays and temperature extremes from -40°C to +120°C.
SMARTach II intelligent electronics are also available packaged in shafted and modular versions to best fit your applications.
MineView diagnostic and monitoring system enables mine personnel to access all machine critical data, NOW!Reduces cycle times and improves productivity by optimizing machine usage Increases machine availability by providing maintenance personnel event data quickly and accurately Onboard data collection allows uninterrupted machine monitoring Remote access to data allows multiple people and locations to view problems simultaneously Fleet-wide performance information backed up with real-time data allows decision makers to compare data across many machines and sites to maximize production.
ADDvantage-32™ Application Programming ToolsADDapt is a Windows™ based software program which provides support for: • Upload/Download of calibration and configuration data • On/Offline parameter editing • Viewing drive diagnostics • Viewing drive event/fault FIFO
ADDapt provides users with full control of the ADDvantage-32 Plus’s 8 channel digital chart recorder. • View high speed, real-time data • Capture and save traces, 2.77ms resolution • Display and analyze performance data
• Severe mine duty • Dual oversize bearings, spaced farther apart • Synthetic bearing lubricant for longer life • Replaces competitive models without rewiring
• Removable sensors • Up to 5000 PPR • Self-diagnostic LED & alarm output • Outputs are short circuit protected
ADDaptTM
MineViewTM
We upgrade aging drive systems from ABB, GE, P&H, Reliance Robicon, Westinghouse and others.Our Advanced Firing Module (AFM) is used to upgrade existing DC drives to “new drive” performance. These cost-effective retrofits can extend the life of your drive system by replacing your outdated and obsolete regulators with state-of-the-art ADDvantage-32 Plus digital regulators. The SCR power bridges, cabinets, wiring, and DC motors are retained. Benefits of a drive system retrofit include: • Significantly reduced cost compared to a total system replacement • Extended life for your drive system • Minimal installation downtime
Our project engineering team has over 40 years of experience designing, building, installing and commissioning custom engineered mining solutions.Areas of expertise cover a wide range of mining applications including mine hoists, electric shovels, draglines, blasthole drills, grinding mills, conveyor systems, slurry pumps, dredges, cranes and rectifiers.
In addition to AC and DC drives, our staff has extensive experience with all major brands of PLCs, HMIs, and networks.
Additional services provided: • Application consulting • On-site project management • Turn-key installations
Customized packaging solutionsCustom designed and manufactured modular pre-assembled power control rooms to meet your specifications.
Each custom engineered drive panel assembly is delivered ready to install which greatly reduces commissioning time.
Custom panels allow equipment owners to more efficiently utilize the limited space available on mobile equipment.
Engineering Services
Custom Packaging
Advanced Firing Module
Nidec Industrial Solutions is committed to helping you maximize your mine’s performance.Our Pillars of Support programs will minimize down-time and maximize machine availability. • Emergency service 24 hours/day, 365 days/year • Emergency shipment of critical spare parts • After hours phone support • Predictive and preventive maintenance contracts • Online software and documentation backup
A Remote Diagnostics connection allows our trained engineers to access your drive control system in real time, 24/7/365.Looking at the same diagnostic screens as your technicians, our engineers can help determine the root cause of a problem. They can guide you through a repair of your equipment and return it to service before a service tech could travel to your site.
Increased Machine Availability • Improved mean time to repair • Problem resolution begins remotely, immediately
Reduced Maintenance Costs • Eliminate the need for a site visit • Avoid unscheduled down-time by monitoring device wear • Get back into production faster
Greater Collaboration with Specific Experts • Compare data from multiple machines and sites • Improve utilization of equipment by optimizing performance
We provide an array of training options, emphasizing a “hands-on” approach:
On-Site Training at your business or work site • More cost effective • Flexible scheduling • System specific
Regional Training classes in centralized locations throughout the US
In-House Training sessions at our facility in Cleveland, Ohio Visit www.nidec-avtron.com/training for a schedule of classes and more information.
Internet
CUSTOMER
MINE OFFICE
TECHNICIAN IN OFFICE TECHNICIAN OUT OF OFFICE
RF
Remote Diagnostics
Service & Support
Customer Training
Product brands manufactured by the Nidec Industrial Solutions group:
Nidec Avtron Automation Corporation:7555 East Pleasant Valley Road | Bldg 100 | Independence | Ohio 44131
P: 216.642.1230 | www.nidec-avtron.com | www.nidec.com
BULLETIN: NAAC - 005 - Mining Solutions
ACCel500TM, ADDaptTM, ADDvantage-32TM, ADDvantage-32 PlusTM, MineViewTM, SMARTach IITM are trademarks of Nidec Avtron Automation Corporation
All other product or company names that may be mentioned in this publication are tradenames, trademarks or registered trademarks of their respective owners.
E N C O D E R S
D R I V E S Y S T E M S
D R I V E S Y S T E M S& E N C O D E R S
P R O D U C T S F R O MN I D E C - A V T R O N