MISUMI Original

Miniature Linear GuidesExtra Long Blocks, Light Preload / Slight Clearance

-5531 -5541

MMaterialHHardness

TypeMX

(Lubrication Unit)L

DimensionLight Preload Slight ClearanceHigh Grade Standard Grade

Stainless Steel56HRC~

SSECB SSECBZBlank: None

-MX: Provided

Selectable

SSECBL SSECBLZ Configurable

Heat Resistant Temperature: -20 ~ 80°C

Part Number - LSSECB10SSECB-MX10SSECB10LSSECB10G

----

2752757575

(With Lubrication Unit)(L Type Greased)(G Type Greased)

Alternative grease types availableD P.531

QFeatures: Extra Long Block Type of MISUMI original standards. Higher load ratings and allowable moments than Long Block Type.

H SelectableL

Unit PriceSSECB SSECBZ

8

40557085

100115130

10

557595

115135155175195215235255275

13

7095

120145170195220245270295320345370395420445470

16

110150190230270310350390430470510550590630670

H Unit PriceSSECBL SSECBLZ

8101316

E�For calculation of L Dimension Configurable Type (1mm Increment), add the above amount to the unit price of the Selectable Type longer than, and closest to this L Dimension Configurable Type.

QL Dimension Configurable Type (1mm Increment)

H

6-Sxl

2-CaW2 W1

(Bottom)

K

2-Cb

B

W

Ød1G

Ød2

L

H 1

hL1

F

C/2

L2C

E�For L Configurable, G dimensions differ from those shown in the table below. For details, see D P. 531.

Alterations Code Spec.

Tapped Hole

MCChanges the rail mounting holes from counterbored holes to tapped holes.

Rail End Cut

Rail is cut with the product ID facing out (datum on other side).

Left End CutLLC

Cuts rail ends. Ordering Code LLC

H L Cut N10 2.5

513 516 10

EApplicable to Selectable Type only.EOverall length will be shorter by cutting.XNot applicable to H8.

Right End Cut RLC

H MC8 M3

10 M41316 M5

L N LN

LLC RLCEngraving

Part Number - L - (MC, RLC, LLC)

SSECB16 - 430 - MC - RLC

Part NumberL

Block Dimension Dowel Hole Dimension Guide Rail Dimension

Type MX H W L1 B C SxL L2 K Cb N C2 (L1) W1 W2 H1 CaCounterbored Hole

F Gd1xd2xh

SSECBSSECBL

SSECBZSSECBLZ

- 8 40~130 17 37.5 12 20 M2x2.5 27.5 6.5 0.3 8.5 20 2 7 5 4.7 0.3 2.4x4.2x2.3 15 5

Blank: None-MX: Provided

10 55~275 20 49.6 15 26 M3x3 38.6 7.8 0.3 10 26 2.5 9 5.5 5.5 0.3 3.5x6x3.5 20 7.5

13 70~470 27 54.8 20 30 M3x3.5 40.8 10 0.5 13.5 30 3 12 7.5 7.5 0.5 3.5x6x4.5 25 10

16 110~670 32 70.3 25 40 M3x4 55.3 12 0.5 16 40 4 15 8.5 9.5 0.5 3.5x6x4.5 40 15

E�Blocks and rails are not sold as separate items. This Type has guaranteed radial clearances and accuracies as sets of blocks and rails.

QPrecautions for UseE�Blocks are equipped with retainers (wire) to prevent balls from falling off. For how to handle the

blocks, see D P.525.E�Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged

from the original set combinations.E�Straight grooves are provided on datum planes. Be sure to match the datum lines when using.E�Rails cannot be connected end to end.E�The accuracy of Linear Guides is guaranteed after mounting the rail (after fastening screws on

the rail and pushing it onto the datum plane). Minor bending of the rail will be adjusted after being mounted and will not affect the performance.

QAccessory • H8 comes with cap screws (M2x6).

QOthers • Filled with Lithium soap based grease (Multemp Grease PS2 by Kyodo Yushi Co., Ltd. ). • For Operating Life Calculation, see D P. 527 • For operating life calculations, use our free calculation software from http://download.misumi.jp/

mol/fa_soft.html. • The MX type is greased with a lithium complex grease (TOUGHLIX GREASE MP2, made by JXTG Nippon Oil & Energy Corporation).

HBasic Load RatingAllowable Static Moment MassC (Dynamic)

kNCo (Static)

kNMA

N • mMB

N • mMC

N • mBlock

kgGuide Rail

kg/m8 1.5 3.3 10.1 10.1 12.4 0.02 0.19 10 2.5 5.0 18.8 18.8 23.7 0.04 0.31 13 3.6 7.6 34.0 34.0 47.3 0.07 0.61 16 6.9 13.5 80.7 80.7 104.3 0.12 1.02

MA MB MC

kgf=Nx0.101972

Specifications Light Preload, High Grade

Slight Clearance, Standard Grade

Radial Clearance -3~0 0~+15Height H Tolerance ±20 ±20Pair Variation of Height H 15 40Width W2 Tolerance ±25 ±25Pair Variation of Width W2 20 40Running Parallelism of Plane C against Plane A

See P. 525Running Parallelism of Plane D against Plane A

QPreload and Accuracy Standards

H

Reference Side

W2

C

AD

B

Unit: µm

E�Slight Clearance Type has clearance (Gap) between rails and blocks. If precision / rigidity is required, select Light Preload Type.

• Shorter block length than Standard Type 2-Block.• Basic load rating C (dynamic) is enhanced up to 192% compared to 1 Block Type. H dimension can be reduced by using a long block.• Basic load rating C (static) is equivalent or higher compared to 1 Block/2 Block Type. 2 Block Type can make guide block length more compact.

QTable of Comparison with Standard Blocks

H

Block O.A.L. (L1) Basic Load Rating C (Dynamic) kN Basic Load Rating Co (Dynamic) kN

Standard 1 Block

Standard 2 Block

Extra Long 1 BlockStandard 1 Block

Standard 2 Block

Extra Long 1 BlockStandard 1 Block

Standard 2 Block

Extra Long 1 BlockCompared to

Standard 1 Block

Compared to Standard 2 Block

Compared to Standard 1 Block

Compared to Standard 2 Block

Compared to Standard 1 Block

Compared to Standard 2 Block

8 23.6 47.2 37.5 +13.9 -9.7 0.9 1.8 1.5 167% 83% 1.5 3 3.3 220% 110%10 30 60 49.6 +19.6 -10.4 1.5 3 2.5 167% 83% 2.5 5 5 200% 100%13 33.9 67.8 54.8 +20.9 -13 2.2 4.4 3.6 164% 82% 3.3 6.6 7.6 230% 115%16 42.4 84.8 70.3 +27.9 -14.5 3.6 7.2 6.9 192% 96% 5.4 10.8 13.5 250% 125%

Position Retaining Parts Block / Rail Fixing Parts

Rail Height Adjusting Blocks

Block Derailment Prevention Parts

QRail Push Plates

QLinear Locks

QLinear Guide Lock Units

Q Stopper Bolts

QOptions for Linear Guide

I Advantages of the Lubrication Unit MX: Provides long-term maintenance-free operation. Reduces maintenance costs.

Oil-impregnated core part

Side Seal

Return Cap

QLubrication Unit

The oil-impregnated porous core part has been built into the product.

The same block size as existing products!