mil-spec testing ebrochure - 1-2014
DESCRIPTION
Microtek Laboratories has more than 25-years of Military Specification (MIL-Spec) testing for the PCB industry. Microtek is an internationally accredited company to A2LA ISO/IEC 17025 and also has commercial Laboratory Suitability Status to the Department of Defense – DLA. Microtek can provide the full range of MIL-Spec testing including; Qualification, Group A and Group inspection for rigid, flex, rigid-flex and high reliability PCB’s in accordance with MIL-PRF-55110; MIL-PRF-31032; MIL-P-50884 as well as numerous MIL-STD-202 and MIL-STD-810 test methods.TRANSCRIPT
• QUALITY
• INTEGRITY
• SERVICE
Microtek Laboratories maintains Laboratory Suitability Status with the U.S. Department of Defense DLAto provide the full-range of test and inspection requirements for Monthly Conformance, Reliability and Qualification Testing
MIL-PRF-55110
MIL-PRF-31032
MIL-P-50884
MIL-STD-202
MIL-STD-810
MIL-STD-883
Military (MIL-Spec)
SpecificationsTesting
Los Angeles | USA
1435 Allec StreetAnaheim | California 92805-6306Phone: (714) 999-1616
TheTestLab.com
Toll Free in U.S.
(800) [email protected]
QUALITY ▪ INTEGRITY ▪ SERVICE
Test CapabilitiesMIL-PRF-55110Performance Specification – General Specification for Printed Wiring Board, RigidQualificationGroup A InspectionGroup B Inspection
MIL-PRF-31032Performance Specification – General Specification for PCB/Printed WiringQualificationLot Conformance InspectionPeriodic Conformance Inspection
MIL-P-50884General Specification for Printed-Wiring, Flexible and Rigid-FlexQualificationGroup A InspectionGroup B InspectionGroup C Inspection
MIL-STD-202Method 101 – Salt Atmosphere (Corrosion)Method 103 – Humidity (Steady State)Method 106 – Moisture ResistanceMethod 107 – Thermal ShockMethod 108 – Life (at Elevated Temperature)Method 111 – Flammability (External Flame)Method 208 – SolderabilityMethod 211 – Terminal StrengthMethod 215 – Resistance to SolventsMethod 301 – Dielectric Withstanding VoltageMethod 302 – Insulation ResistanceMethod 307 – Contact Resistance
Microtek Laboratories has more than 25-years of Military Specification (MIL-Spec)testing for the PCB industry. Microtek is an internationally accredited company toA2LA ISO/IEC 17025 and also has commercial Laboratory Suitability Status to theDepartment of Defense – DLA. Microtek can provide the full range of MIL-Spectesting including; Qualification, Group A and Group inspection for rigid, flex, rigid-flex and high reliability PCB’s in accordance with MIL-PRF-55110; MIL-PRF-31032;MIL-P-50884 as well as numerous MIL-STD-202 and MIL-STD-810 test methods.
Military Specification (MIL-Spec) Testing
MIL-STD-810Method 501.2 – High TemperatureMethod 502.4 – Low TemperatureMethod 503.4 – Temperature ShockMethod 507.4 – HumidityMethod 509.4 – Salt Fog (Spray/Corrosion)
Engineering Contacts Kevin Belisario
Project Manager
Eric BenjaminsProject Manager
Damon RachellDirector of Technical Services
Russ ShepherdVice President of Operations
