mikrotik® mpls/vpn lab part 1

Download Mikrotik® MPLS/VPN Lab Part 1

Post on 26-May-2015

3.293 views

Category:

Technology

4 download

Embed Size (px)

DESCRIPTION

This guide describes the building blocks of MPLS/VPN lab scenario using Mikrotik RouterOS and Juniper Networks Secure Service Gateway and SRX series .

TRANSCRIPT

  • 1. Mikrotik MPLS/VPN Lab Part-1 By Kaveh Khosravi

2. What will be covered Introduction How to set up the Lab Configuration Connectivity Check 3. Introduction In this lab you are going to learn how to use Mikrotiks powerful operating system , Router OS , in order to implement MPLS/VPN functionality , although it lacks Important features like fast reroute * . All of the main examples and configurations for MPLS/VPN are given from Mikrotiks documentations ** website . 4. How to set up the Lab The DELL Labtop is used for runnig vmware workstation to simulate the MPLS network with virtual machines running as Mikrotik Router-OS as Provider (P) and Provider Edge (PE) routers,Windows Server 2003 as Customer Edge ( CE) routers . Juniper SRX 210HM , First SSG-5 and Second SSG-5 act as HUB site , Spoke-Branch-1 and Spoke-Branch-2 respectively . Labtops FastEthernet and Pluggable USB to Gigabit Ethernets are used for connecting CE-1 to HUB site , CE-2 to spoke-2 and CE-3 to spoke-3 so we can make bridge between real world and Virtual world . Lets take a look at physical lab components 5. How to set up the Lab The Lab used in this tutorials consists of the following : Hardware 1. 2. 3. 4.DELL N-4030 Labtop x1 Juniper Networks SRX 210HM x1 Juniper Networks Secure Services Gateway ( SSG5-SB) x2 Pluggable USB 2.0 to Gigabit Ethernet Converter x2 6. How to set up the Lab The Lab used in this tutorials consists of the following : Hardware (DELL N-4030 Labtop ) 7. ProcessorIntel Core i3-370M 2.4GHz Processor with Intel Hyper-Threading Technology (3MB Cache)Memory Hard Drive2GB DDR3-1333 320GB 5400RPMChipsetMobile Intel 5 Series Express Chipset HM57GraphicsIntel HD GraphicsDisplay14.0" High Definition (720p) 1366 x 768 WLED Display with TrueLifeTMOptical Drive NetworkDVD+/-RW Optical Drive Integrated 10/100 EthernetCommunicationDell Wireless 1501 802.11 b/g/n; Dell Wireless 365 BluetoothAudioIntegrated Stereo SoundCameraIntegrated .3 Megapixel Web Camera 8. How to set up the Lab The Lab used in this tutorials consists of the following : Hardware (Juniper Networks SRX 210HM )SRX210 Services Gateway with 2 GbE+ 6 Fast Ethernet ports, 1 Mini-PIM slot, 1 ExpressCard slot and high memory (1 GB RAM, 1 GB Flash) 9. How to set up the Lab The Lab used in this tutorials consists of the following : Hardware (Juniper Networks Secure Services Gateway )Juniper Networks Secure Services Gateway 5 with RS-232 Aux backup, Wireless 802.11a/b/g, 128 MB Memory 10. How to set up the Lab The Lab used in this tutorials consists of the following : Hardware (Pluggable USB 2.0 to Gigabit Ethernet Converter ) 11. How to set up the Lab Hardware (Pluggable USB 2.0 to Gigabit Ethernet Converter ) USB 2.0 male A to RJ45 female adapter supporting gigabit ethernet at USB 2.0 speeds Drivers for Windows 7, Vista, XP, and Mac (requires download, see OS X 10.7 instructions), and Linux (built into kernel 3.2 and above, earlier kernels require download and compile). Supports 10/100/1000 with auto-sensing (IEEE 802.3, 802.3u, and 802.3ab) Supports auto MDIX (straight and cross cable auto-detection) ASIX AX88178 Controller Jumbo packets up to 9KB (Windows only), along with suspend mode and remote wakeup 12. How to set up the Lab The Lab used in this tutorials consists of the following : Software 1. 2. 3.Vmware Workstation 9 ( evaluation ) Windows Server 2003 ( evaluation ) as Virtual machine Mikrotik Router OS ( evaluation) as Vitual machine 13. How to set up the Lab The Lab used in this tutorials consists of the following : Software (Windows Server 2003 ) There is no need for no one in the networking field , with a few years of experience , to say : what is W2K3 ? Just like a previous slide , W2K3 is going to be installed in Vmware . 14. How to set up the Lab The Lab used in this tutorials consists of the following : Software ( Vmware Workstation 9 ) In the Implementation section you can see how to warm it up ! 15. Everything is clear ! 16. Juniper SRX & SSG-5 Devices 17. USB-> Ethernet & Spoke-1 labeled cable 18. The link between CE-1 & Spoke-1 via USB->Ethernet Spoke-2Spoke-1HUB 19. OC-3 155.52MbpsOC-3 155.52Mbps OC-3 155.52MbpsT1 1.544Mbps T3- 6.312MbpsT1 1.544Mbps 20. NEXT : Physical lab video 1