midland combustion limited - find the needlepdfs.findtheneedle.co.uk/7689-20.pdf · 2014. 10....
TRANSCRIPT
-
Midland Combustion LimitedLEADERS IN EXCELLENCE THROUGH HEATING, PUMPING AND PROCESS SYSTEMS
Mid land Combus t i on L im i t edS t a t i o n W o r k s , F o u r A s h e sW o l v e r h a m p t o n W V 1 0 7 B X
T e l : + 4 4 ( 0 ) 1 9 0 2 7 9 0 5 4 1
F a x : + 4 4 ( 0 ) 1 9 0 2 7 9 1 5 2 6
e-mail: [email protected]
www.mid-com.co.uk
-
Midland Combustion’s
quality management systems have been
approved by NQR quality assurance to
standard BS EN ISO 9001:
M54
For Fifty years Midland Combustion Limited have pioneered thedesign, development, manufacture, test, erection andinstallation, of Advanced fuel oil heaters, Fuel oil Pumping& Heating products, Cooling systems, Mineral oil treatmentsystems and Composite packaged modules for a wide andvaried range of media.
All equipment manufactured complies fully with EuropeanStandards and Legislation. Products are PED compliant andcarry the CE mark. All Heaters designed in accordance withPD 5500 and ASME VIII.
Our ObjectiveTo ensure that the customer gets the solution they need that delivers performance expected from the equipment supplied by Midland Combustion Limited.
Our MissionTo design, manufacture and deliver a range of heaters,pumping systems, process system solutions that incorporate the highest standards of engineering principles that exceed our customer expectations.
Through continuous innovation to develop a range ofproducts and services which will secure a steady growth forthe company, the prosperity of its employees and the protection of the environment.
To develop a company culture where customer service isthe core of its values, to strive always to do its very bestand to be realistic, truthful, accurate in its dealing with customers and its suppliers.
Location:Two miles North on the A449
from Junction 2, M54.Two miles from
Junction 12,M6.
Fuel oil pumping and filtering packaged sets
are totally self contained units fully piped,
electrically connected and mounted on a
mild steel, weatherproof drip tray base.
The turnkey systems come complete with
pump(s), filter(s) instrumentation, controls
and motor starter(s) ready for immediate
connection and operation on site.
Simplex, Duplex and Triplex systems are
available. In each case the fuel pump is
self-priming, positive displacement normally
supplied with integral oil relief valve, direct
coupled to a TEFC electric motor.
Dual basket filter(s) with changeover to
facilitate on-line cleaning of elements are
incorporated although single basket filters
are an option.
FUEL OIL TRANSFERPACKAGED SETS
-
OIL STORAGETANKS
Oil Storage Tanks either single or Twin Skin
Design, complying with the latest standards.
Tanks for holding Fuel Oils, Waste Oils, and
Water, can be fitted complete with integral
pipework and Control Panels.
For some applications Midcom Heaters are
fitted.
Tank construction is either of Mild Steel or
Stainless Steel, built to BS 799.
Lube oiltank system
MARINEPACKAGES
Ship’s Bulk Head SystemCrude Oil Pumping
Fuel OilConditioningUnit
Specialised Packages for the Marine
Industry have been supplied by Midcom
for Fifty years.
Equipment approved by Lloyds Register of
Shipping, DNV, ABS and all other major
inspection authorities throughout the
world.
-
SPECIALPRODUCTS
Midcom Heating and Pumping Systemfor power generation. Steam andElectric Heaters combined with pipingand instrumentsto form one skid.
Midcom Pressurising Systems forMarine Diesel. Design considerationswere for locations where temperaturesregularly drop below -40ºC. Specialconsideration is given to material selection and overall system design toallow for continual working at suchlow temperatures.
Midcom Heating Packages consistingof twin Steam Heaters and associatedSteam Controls. System designed foroffshore applications where the operating temperature often dropsbelow -40ºC. Special consideration isgiven to material selection and overall
system design to allow continual working at such low temperatures.
Pictured are Triple Electric Heaterswith Thyristor Control for theheating of thermal oils for ProcessHeating. Thermal oil is heated andpumped at 220ºC. The packagesystems are designed, built andfully tested before leaving the factory.
Today the demands of power generation
authorities, major industrial users, boiler
manufacturers and exporting contractors is
for self contained, fully works tested
composite packages such as Pumping,
Filtering and Heating to speed installation,
guarantee quality and eliminate the risks of
site installation problems.
The high cost of site installation and
commissioning is also minimised through
pre-assembled systems.
These two factors alone have lead to a
dramatic increase in the requirement for self
contained, modular packages pre-designed
and tested. Midcom has been supplying
such works tested systems for well over four
decades.
Turnkey systems with fully interconnected
pipework eliminate site machining,
fabrication, welding and the resultant
damage that can be caused to precision
pumps and control systems.
-
HEAVY FUEL OILHANDLING SCHEME
BOILER
PUMPING & HEATING MODULE
UNLOADING MODULE
M
BULK STORAGE TANK
MIDCOMTANK HEATER
FIRE VALVE
CONTROL PANEL
MIDCOMOUTFLOW HEATER
MIDCOMIMMERSION HEATER
PRESSURE CONTROL MODULE
Midcom specialised Fuel Oil Unloading Pumping Unit.
Standard Pumping Units withControls for Diesel/Heavy FuelOils. Used for Transferring orPressurised applications.
Midcom Pumping and Heatingequipment supplied to service one ormore Oil Burners/Boilers.
Midcom Ring Main Pumping,Heating, and Filtering Unit.Raising the oil needed by the BurnerSystem for efficient atomisation.
Designed to use with any grade of Residual orDistillate Oils from 1cSt – 2500 cSt, and supplythis fuel at the correct temperature and pressure to give the optimum combustion conditions at the Boiler front for efficient operation.
Midcom Oil Pressure Control
Valve, supplied to form pressurised
ring main.
Maintain thetemperature ofyour tank contents byinstalling Midcommodular tankHeaters. UsingSteam, Water and Thermal Oilas the heating medium. Install these heaters forall grades of Residual Oil and any grade ofBitumen. Can be fitted to new or existing tanks.
-
Designs of Electric Line Heaters are
available to work with even the most
difficult oils and fluids.
High viscosity crude oils as well as coal tar
fuels, waste oils, lubricating and mineral
oils, water and numerous process fluids
can be precisely heated at the point of
outflow from storage to suit the process
requirements.
Heaters manufactured from Carbon, Steel,
and Stainless Steel, and have withdrawable
refractory core type elements to give heat
flux density variations to suit specific
conditions. The range of commercial
heaters are wide and varied and can range
from 1 kW to 1200 kW using multiple
heaters.
HAZARDOUS AREAHEATERS
Flame ProofElectric Crude Oil Line Heater
Packaged ‘Combined’ Steam
and Electric Immersion Heater.
The electric side is flameproof to allow for
installation into hazardous areas.
Midcom ATEX approvedHAZARDOUS AREAPACKAGES
Heavy Fuel Oil Heating & Pumping Unit. Two
Steam heaters and two Zone1 Electric heaters
packaged together with control panel, all
interwired for locating in Zone 1 industrial area.
A type of package that can be designed and
built at Midcom. Small draining tank for holding
crude oil.
Suitable for installation in Zone 1 classified area.
-
Electric Trace Heating Tapewith temperature controlsupplied loose or part of apackage.
Motorised Pumps
Control Panel PLC
Thermostats
Pipe FabricationsCarbon, Stainless Steel 300/316Duplex, Stainless Steel.
Replacement Ceramics Electric Elements
Heater Tube Sheet &SupportCarbon, Stainless Steel.
Filters
By using an experienced, time-served workforce
to operate an extensive range of Fabrication and
Machine shop equipment, we can provide
services from our workshops within Midcom, all
covered by BS. EN. ISO 9001 accreditation with
the British Standards Institute.
These services include, but are not limited to, the
following:
l Pipework including Bending.
l Profile burning of both Plate and Pipe.
l Carbon, Stainless and Exotic Steel Fabrication.
l Inspection and Welding Engineers providing
full traceability.
FABRICATION &ENGINEERING
COMPLETEPARTS & PRODUCTSERVICES
-
CONTROLPANELS
TRVTE
XS
Midcom designs and builds a wide range
of Control Panels from simple on/off
Control up to Synchronised Thyristor
Control. Each design meets up to date
Standards and exact customer
requirements.
Supplied as a loose item for installing on
site, or as part of a package with
interconnecting wiring.
Applications
l Industrial.
l HVAC.
l Pump Control.
l Heater Control.
l Motor Control.