microscience and microscopy in metals[1]
TRANSCRIPT
Accelerating Sciencehttp://acceleratingscience.com
Microscience and Microscopy in Metals
Metals - June 19, 2014
Author : Carl Milholland
The Microscience and Microscopy Congress 2014 (MMC 2014) is Europe’s largest eventdedicated to microscopy and imaging. An international conference, it offers four parallelsessions, pre-congress workshops, poster presentations, a huge exhibition and a fully-equippedteaching and learning zone – all under one roof!
The program will feature the best from both worlds in the microscopical sense – from the lifeand physical sciences, and from light and electron microscopy.
Organized by the Royal Microscopical Society, the show is always at the forefront of new ideasand developments in microscopy and imaging. The Society is dedicated to advancing science,developing careers and supporting wider understanding of science and microscopy, so all themajor manufacturers and suppliers of microscopes, equipment and services will be represented.
We will be demonstrating how X-ray microanalysis plays a key role in the development,production and failure analysis of metals and advanced metallic materials. If you want to get aclose look at X-ray micronanalysis and Energy-Dispersive X-ray Spectroscopy (EDS), makesure you register for our lunchtime seminar where you will learn how to specify an EDS detector. An energy-dispersive (EDS) detector is used to separate the characteristic x-rays of differentelements into an energy spectrum, and then utilizes software to analyze the spectrum anddetermine specific elements within a sample.
New EDS detector technology enables electron microscopists to distinguish overlapping peaksin transition metals even when using low voltages, where L-lines are prone to energy conflicts.Fully integrated into WDS, this technology makes high spectral resolution analysis accessible tothe everyday microscopist. Stop by Booth 1101 if you have any questions about EDS.
If you are planning to stay an extra day or two, make sure you visit the Museum of Science andIndustry in Manchester. With permanent galleries spread across five listed historic buildingsand collections ranging from early textile machinery to modern X-ray equipment, there's a lot todiscover. You can explore the Air and Space Gallery and look back to the early days of flyingmachines before aluminum and titanium alloys became vital metals in the aircraft industry. Orvisit the machine tools exhibit, and see how manufacturing and fabrication has changed over
1 / 2
Accelerating Sciencehttp://acceleratingscience.com
the years.
If you can’t make the show, feel free to leave your questions in the comment field below.
Show Details:Microscience Microscopy Congress 2014 Booth 1101
FREE Lunchtime Seminar: How to specify an EDS detectorTuesday 1 July 13:15 – 14:00 Register
Powered by TCPDF (www.tcpdf.org)
2 / 2