micron32 gearGear pumpThis version has the same performances as ‘micron series’ piston pum added with special characteristics of a gear pump and with a tank volume of 32 liters. The gear pump allows an equal and precise glue application by a control of the glue quantity through the gear speed.

Multifunctional electronic controlThis new development combines the electronic ‘meler’ control that allows a very userfriendly handling and very effective and intuitive motor control.

Easy AccessThe easy access to all the components of the ‘micron gear’ is a big advantage in reference to others models. It allows a fast access to all internal components of the system (motor, controls,...) by the use of a double side-opening door, which provides total accesibility.

ConnectionsThe hose connections of the ‘micron gear’ can be installed at the rear side of the system, close to the main machine. Two hoses per pump and manifold can be installed with a maximum of two pumps per unit.

TankThe new ‘micron gear’ equipment has a large tank loading zone, as well as a tank drain valve, making its fi lling and emptying easier. In addition, it includes a large contact zones, providing an optimal fusion rate.

The PUR version comes with a dry-air-supply, that maintains the tank-air fully dry.

Motor-pumpThe assembly of motor-gearbox-pump garanties an equal hot-melt supply, which is controlled by the motor rotation speed. A large num-ber of pump-sizes and simple and twin pumps are available.

CompatibilityThe ‘micron gear’ can be equipped with Pt100 as well as with Ni120 sensor technology. Therefore it is compatible with most of the commom hot-melt systems in the market.

SafetyThe by-pass ensures, that excess pressure situations are avoided in the system. It also allows to maintain a constant system pressure even in intermittent applications with clo-sed, non applying guns.

MELER GROUPCorporate HeadquartersE-mail: info@meler.es

w w w . m e l e r . e sP.I. Los Agustinos, Calle-G, Nave-D-43E-31.160 ORCOYEN. Navarra (Spain)Tel.: +34 948 351 110 - Fax.: +34 948 351 130

TECHNICAL CHARACTERISTICSTank volume 32 litersPumping rate single pump 1, 4 and 8 cc/rev (depending on type of adhesive) twin pump 0.6x2, 1.2x2, 2.4x2 and 4.8x2 cc/rev (depending on type of adhesive)Melting rate 30 kg/h (depending on type of adhesive)Number of pumps 2Number of outputs 2 per pumpMotor power 250 WPump speed 0-100 rpm (10-80 rpm recommended)Temperatures range 40 to 200ºC (230ºC optional)Temperature control RTD ±0,5ºCMax. working pressure 90 bar (1.305 psi)Pressure relief valve mechanical (pneumatic as option)Max. input power (at 230 VAC) 8.750 W (2 outputs with single pump) 11.150 W (4 outputs with single pump) 13.550 W (6 outputs with single pump) 11.450 W (2 outputs with twin pump) 13.850 W (4 outputs with twin pump) External functions Temperatures ok output Low level output External standby activation Outputs enabled external control Motor ON/OFF external contact Motor speed external controlElectrical connections 230V 1~ 50/60 Hz + N + PE 230V 3~ 50/60 Hz + N + PE 400V 3~ 50/60 Hz + N + PEDimensions 860x429x1121.5Options Low level detector Pneumatic pressure relief valve Air dryer system (PUR version) Automatic feeding system

C 018

-S Re

v 00

Meler

rese

rves t

he rig

ht to

modif

y the

conte

nts of

this c

atalog

ue wi

thout

notice

.

IDENT FECHA MODIFICACION REALIZADO APROBADOMATERIAL/MATERIAL TRATAMIENTO/TREATMENT

VALIDADO/COMFIRMDIBUJADO/DESIGN

NOMBRE/NAME

FECHA/DATE

TITULO/TITLE

ESCALA/SCALE

CERTIFICACION/CERTIFICATION TOLERANCIAS GENERALES/GENERAL TOLERANCES PESO/WEIGHT

REFERENCIAREFERENCE

SUS. A

CATEGORIA

DENOMINACION/DENOMINATION

Este plano es propiedad exclusiva de MELER APLICACIONES DE HOT - MELT S.A. y su reproducción total o parcial está totalmente prohibida y queda amparada bajo la legislación vigenteLos contraventores serán perseguidos legalmente tanto en España como en el extranjero. El uso,copia, reproducción o venta de esta publicación, sólo podrá realizarse con autorizaciónexpresa y por escrito de MELER APLICACIONES DE HOT - MELT S.A.

Nº DE HOJAS

D.Z.D.

16/04/2007

UNE EN 22768-1 F

Nota: Las cotas indicadas en el plano son despues del tratamiento. A todas las cotas con toleranciase les debe de aplicar corrección de medida acorde al tratamiento indicado en el plano.

987

449,

2

429

1503

,5

1121

,5

1027

,5

739

411

114

204

860,1

429

411

1027

,510

27,5

1503

,515

03,5

1121

,511

21,5

204

114860

739

449

987