microfin - dynatect.de
TRANSCRIPT
1
Global Leaders in Dynamic Protectionfor Equipment and People
MICROFIN
Dynamischer Schutz für Mensch und Maschine
THODACON MFB STEINBOCK
DYNATEC T.DETHODACON.COM
Finned bellow with modular construction
2
MICROFIN
MICROFIN - Finned bellow with modular construction
Anti-Scratch
Minimal compressionWith its new designed geometry microFIN feather elements interlock with the bellow elements. This enables the whole construction to archieve a compression of 2,4 mm per lamella.In comparison to regular bellows which have a relatively high compressi-on rate, the whole machine stroke can be grately enlarged.
is prevented and the lifetime of the cover is increased significant (up to 70%). Additionaly it increases the tightness against coolants and chips.**available for lamellas up to 1000 mm in width
conventional microFIN
3
MICROFIN - Finned bellow with modular construction
MICROFIN
ExchangeEach lamella is removable from the bellow - corpus without disassem-bly of the whole cover system. This is achieved by a plug connection between corpus lamella and protection lamella.Damaged lamellas can be removed easily and cost-effective.
Due to its modular construction an additional fabric can be added to the cover system. As a result the cover gets 100% seal against coolants without increasing the compression rate.
Fabric
protection lamella
corpus lamella
4
PROLIGHT LED
Micro�n 03/2021Dynatect® is a proprietary trademark of Dynatect Manufacturing, Inc. | © 2021 Dynatect Manufacturing, Inc. |
DYNATECT EUROPE GmbH Oberes Feld 12 33803
Steinhagen
Phone: +49 (0)5204 99870-0 Fax: +49 (0)5204 99870-11 E-Mail: [email protected]
THODACON Werkzeugmaschinenschutz GmbH Rosenheimer Str. 64a83059
Kolbermoor
Phone: +49 (0)8031 22205-71Fax: +49 (0)8031 22205-72E-Mail: [email protected]
Germany Germany