mguide conical connection narrow sleeve kit wall chart
DESCRIPTION
ÂTRANSCRIPT
MGUIDE Conical Narrow Sleeve Kit Content:
CG-NTAS0MGUIDE narrow template anchoring screw, coni. con., SP
1
MG-NLG40MGUIDE narrow drill length gauge Ø4mm
27
CG-N1333MGUIDE coni. con. narrow drill: imp. Ø3.30 L13mm
12
CG-N1133MGUIDE coni. con. narrow drill: imp. Ø3.30 L11.50mm
11
CG-N0839MGUIDE coni. con. narrow drill: imp. Ø3.90 L8mm
13
CG-NRS10MGUIDE narrow ratchet insertion tool, coni. con., C1, SP
23
CG-NMN10MGUIDE narrow motor insertion tool, coni. con., C1, NP
18
CG-N1039MGUIDE coni. con. narrow drill: imp. Ø3.90 L10mm
14
VG-NRS10MGUIDE narrow ratchet insertion tool, coni. con., V3, SP
24
CG-NRN01MGUIDE narrow ratchet insertion tool, coni. con., C1, NP
19
CG-N1139MGUIDE coni. con. narrow drill: imp. Ø3.90 L11.50mm
15
CG-NMS10MGUIDE narrow motor insertion tool, coni. con., SP
25
VG-NRN10MGUIDE narrow ratchet insertion tool, coni. con., V3, NP
20
CG-N1339MGUIDE coni. con. narrow drill: imp. Ø3.90 L13mm
16
CG-NRS01MGUIDE narrow direct insertion tool, coni. con., SP
26
VG-NMN10MGUIDE narrow motor insertion tool, coni. con., V3, NP
21
VG-NRN01MGUIDE narrow direct insertion tool, coni. con., V3, NP
22
MG-N1024MGUIDE narrow pilot drill Ø2.40 L10mm
6
MG-N0624MGUIDE narrow pilot drill Ø2.40 L6mm
4
MG-N0824MGUIDE narrow pilot drill Ø2.40 L8mm
5
CG-N1033MGUIDE coni. con. narrow drill: imp. Ø3.30 L10mm
10
MG-N1124MGUIDE narrow pilot drill Ø2.40 L11.50mm
7
CG-N0833MGUIDE coni. con. narrow drill: imp. Ø3.30 L8mm
9
Narrow Sleeve Kitwall chart
Conical Connection
Batch Code
Catalog Number Non sterile
Key to code used:
Manufacturer
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
Drill's laser marks:
Side 1: drill cutting diameters
Side 2: implant length
Ø2.
9-Ø
3.9
For cleaning and sterilization instructions, please refer to the included Cleaning and Maintenance Instructions for Surgical Instruments.
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
FOR NARROW SLEEVE
{ {2
3
4
9
10
11
12
13
14
15
16
17 23
25
26
2420
2118
27
19 22
5
6
7
8
L 13
MG-N1324MGUIDE narrow pilot drill Ø2.40 L13mm
8CG-NRN10MGUIDE narrow ratchet insertion tool, coni. con., C1, NP
17
MG-NBM40MGUIDE narrow bone mill Ø4mm
3
MG-NTP40
2
MGUIDE narrow tissue punch Ø4mm1
After each use instruments numbers 19, 22, 26 should be disassembled prior to cleaning. Reassembly prior to sterilization is required.
MGUIDE Conical Narrow Sleeve Kit Content:
CG-NTAS0MGUIDE narrow template anchoring screw, coni. con., SP
1
MG-NLG40MGUIDE narrow drill length gauge Ø4mm
27
CG-N1333MGUIDE coni. con. narrow drill: imp. Ø3.30 L13mm
12
CG-N1133MGUIDE coni. con. narrow drill: imp. Ø3.30 L11.50mm
11
CG-N0839MGUIDE coni. con. narrow drill: imp. Ø3.90 L8mm
13
CG-NRS10MGUIDE narrow ratchet insertion tool, coni. con., C1, SP
23
CG-NMN10MGUIDE narrow motor insertion tool, coni. con., C1, NP
18
CG-N1039MGUIDE coni. con. narrow drill: imp. Ø3.90 L10mm
14
VG-NRS10MGUIDE narrow ratchet insertion tool, coni. con., V3, SP
24
CG-NRN01MGUIDE narrow ratchet insertion tool, coni. con., C1, NP
19
CG-N1139MGUIDE coni. con. narrow drill: imp. Ø3.90 L11.50mm
15
CG-NMS10MGUIDE narrow motor insertion tool, coni. con., SP
25
VG-NRN10MGUIDE narrow ratchet insertion tool, coni. con., V3, NP
20
CG-N1339MGUIDE coni. con. narrow drill: imp. Ø3.90 L13mm
16
CG-NRS01MGUIDE narrow direct insertion tool, coni. con., SP
26
VG-NMN10MGUIDE narrow motor insertion tool, coni. con., V3, NP
21
VG-NRN01MGUIDE narrow direct insertion tool, coni. con., V3, NP
22
MG-N1024MGUIDE narrow pilot drill Ø2.40 L10mm
6
MG-N0624MGUIDE narrow pilot drill Ø2.40 L6mm
4
MG-N0824MGUIDE narrow pilot drill Ø2.40 L8mm
5
CG-N1033MGUIDE coni. con. narrow drill: imp. Ø3.30 L10mm
10
MG-N1124MGUIDE narrow pilot drill Ø2.40 L11.50mm
7
CG-N0833MGUIDE coni. con. narrow drill: imp. Ø3.30 L8mm
9
Narrow Sleeve Kitwall chart
Conical Connection
Batch Code
Catalog Number Non sterile
Key to code used:
Manufacturer
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
Drill's laser marks:
Side 1: drill cutting diameters
Side 2: implant length
Ø2.
9-Ø
3.9
For cleaning and sterilization instructions, please refer to the included Cleaning and Maintenance Instructions for Surgical Instruments.
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
FOR NARROW SLEEVE
{ {2
3
4
9
10
11
12
13
14
15
16
17 23
25
26
2420
2118
27
19 22
5
6
7
8
L 13
MG-N1324MGUIDE narrow pilot drill Ø2.40 L13mm
8CG-NRN10MGUIDE narrow ratchet insertion tool, coni. con., C1, NP
17
MG-NBM40MGUIDE narrow bone mill Ø4mm
3
MG-NTP40
2
MGUIDE narrow tissue punch Ø4mm1
After each use instruments numbers 19, 22, 26 should be disassembled prior to cleaning. Reassembly prior to sterilization is required.
MGUIDE Conical Narrow Sleeve Kit Content:
CG-NTAS0MGUIDE narrow template anchoring screw, coni. con., SP
1
MG-NLG40MGUIDE narrow drill length gauge Ø4mm
27
CG-N1333MGUIDE coni. con. narrow drill: imp. Ø3.30 L13mm
12
CG-N1133MGUIDE coni. con. narrow drill: imp. Ø3.30 L11.50mm
11
CG-N0839MGUIDE coni. con. narrow drill: imp. Ø3.90 L8mm
13
CG-NRS10MGUIDE narrow ratchet insertion tool, coni. con., C1, SP
23
CG-NMN10MGUIDE narrow motor insertion tool, coni. con., C1, NP
18
CG-N1039MGUIDE coni. con. narrow drill: imp. Ø3.90 L10mm
14
VG-NRS10MGUIDE narrow ratchet insertion tool, coni. con., V3, SP
24
CG-NRN01MGUIDE narrow ratchet insertion tool, coni. con., C1, NP
19
CG-N1139MGUIDE coni. con. narrow drill: imp. Ø3.90 L11.50mm
15
CG-NMS10MGUIDE narrow motor insertion tool, coni. con., SP
25
VG-NRN10MGUIDE narrow ratchet insertion tool, coni. con., V3, NP
20
CG-N1339MGUIDE coni. con. narrow drill: imp. Ø3.90 L13mm
16
CG-NRS01MGUIDE narrow direct insertion tool, coni. con., SP
26
VG-NMN10MGUIDE narrow motor insertion tool, coni. con., V3, NP
21
VG-NRN01MGUIDE narrow direct insertion tool, coni. con., V3, NP
22
MG-N1024MGUIDE narrow pilot drill Ø2.40 L10mm
6
MG-N0624MGUIDE narrow pilot drill Ø2.40 L6mm
4
MG-N0824MGUIDE narrow pilot drill Ø2.40 L8mm
5
CG-N1033MGUIDE coni. con. narrow drill: imp. Ø3.30 L10mm
10
MG-N1124MGUIDE narrow pilot drill Ø2.40 L11.50mm
7
CG-N0833MGUIDE coni. con. narrow drill: imp. Ø3.30 L8mm
9
Narrow Sleeve Kitwall chart
Conical Connection
Batch Code
Catalog Number Non sterile
Key to code used:
Manufacturer
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
Drill's laser marks:
Side 1: drill cutting diameters
Side 2: implant length
Ø2.
9-Ø
3.9
For cleaning and sterilization instructions, please refer to the included Cleaning and Maintenance Instructions for Surgical Instruments.
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
FOR NARROW SLEEVE
{ {2
3
4
9
10
11
12
13
14
15
16
17 23
25
26
2420
2118
27
19 22
5
6
7
8
L 13
MG-N1324MGUIDE narrow pilot drill Ø2.40 L13mm
8CG-NRN10MGUIDE narrow ratchet insertion tool, coni. con., C1, NP
17
MG-NBM40MGUIDE narrow bone mill Ø4mm
3
MG-NTP40
2
MGUIDE narrow tissue punch Ø4mm1
After each use instruments numbers 19, 22, 26 should be disassembled prior to cleaning. Reassembly prior to sterilization is required.
MP-WCG07 Rev. 1 Jan 2017
(type 3&4) (type 1&2)Soft Hard
BONE TYPE
▪ The drilling sequence is demonstrated by a 11.5mm C1 implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the last drill for bone type 3&4
Ø3.75mm/Ø3.90mm
Ø3.30mm
Starter DrillMG-N0624
Drilling Speed (RPM)
Diameter Ø2.40
400-600
Ø3.30
15-25
Ø2.40
400-600
Ø2.30Ø3.25
200-400 Drilling Speed (RPM)
Diameter Ø2.40
400-600
Ø3.75
15-25
Ø2.30Ø3.25
200-400
Ø2.90Ø3.85
200-400
400-600
Ø2.40
Starter DrillMG-N0624
▪ The drilling sequence is demonstrated by a 11.5mm C1 implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the last drill for bone type 3&4
(type 3&4) (type 1&2)Soft Hard
BONE TYPE
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MIS Implants Technologies Ltd. www.mis-implants.com
®
MIS’ Quality System complies with international quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices, ISO 9001: 2008 – Quality Management
System and CE Directive for Medical Devices 93/42/
EEC. MIS’ products are cleared for marketing
in the USA and CE approved.
MP-WCG07 Rev. 1 Jan 2017
(type 3&4) (type 1&2)Soft Hard
BONE TYPE
▪ The drilling sequence is demonstrated by a 11.5mm C1 implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the last drill for bone type 3&4
Ø3.75mm/Ø3.90mm
Ø3.30mm
Starter DrillMG-N0624
Drilling Speed (RPM)
Diameter Ø2.40
400-600
Ø3.30
15-25
Ø2.40
400-600
Ø2.30Ø3.25
200-400 Drilling Speed (RPM)
Diameter Ø2.40
400-600
Ø3.75
15-25
Ø2.30Ø3.25
200-400
Ø2.90Ø3.85
200-400
400-600
Ø2.40
Starter DrillMG-N0624
▪ The drilling sequence is demonstrated by a 11.5mm C1 implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the last drill for bone type 3&4
(type 3&4) (type 1&2)Soft Hard
BONE TYPE
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MIS Implants Technologies Ltd. www.mis-implants.com
®
MIS’ Quality System complies with international quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices, ISO 9001: 2008 – Quality Management
System and CE Directive for Medical Devices 93/42/
EEC. MIS’ products are cleared for marketing
in the USA and CE approved.
MP-WCG07 Rev. 1 Jan 2017
(type 3&4) (type 1&2)Soft Hard
BONE TYPE
▪ The drilling sequence is demonstrated by a 11.5mm C1 implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the last drill for bone type 3&4
Ø3.75mm/Ø3.90mm
Ø3.30mm
Starter DrillMG-N0624
Drilling Speed (RPM)
Diameter Ø2.40
400-600
Ø3.30
15-25
Ø2.40
400-600
Ø2.30Ø3.25
200-400 Drilling Speed (RPM)
Diameter Ø2.40
400-600
Ø3.75
15-25
Ø2.30Ø3.25
200-400
Ø2.90Ø3.85
200-400
400-600
Ø2.40
Starter DrillMG-N0624
▪ The drilling sequence is demonstrated by a 11.5mm C1 implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the last drill for bone type 3&4
(type 3&4) (type 1&2)Soft Hard
BONE TYPE
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MIS Implants Technologies Ltd. www.mis-implants.com
®
MIS’ Quality System complies with international quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices, ISO 9001: 2008 – Quality Management
System and CE Directive for Medical Devices 93/42/
EEC. MIS’ products are cleared for marketing
in the USA and CE approved.