methods of gaining space. / orthodontic courses by indian dental academy
TRANSCRIPT
www.indiandentalacademy.com 1
METHODS OF GAINING SPACE.
INDIAN DENTAL ACADEMY
Leader in continuing dental education
www.indiandentalacademy.com
2
Space required to Move teeth into ideal locations. Correction of crowding,
retraction,intrusion, leveling of curve of Spee, derotation of anterior teeth, correction of molar relation.
www.indiandentalacademy.com
3
SPACE CAN BE GAINED BY
Non extraction method Extraction method.Expansion
Interproximal reduction.Molar distalization
www.indiandentalacademy.com
4
When to employ the method of Non extraction for gaining space?Guide lines:
•8mm/less of crowding-mild to moderate space requirement.•Severely mesially and lingually tipped posterior teeth-constricted arches(no skeletal component of malocclusion).•No need to alter the facial profile.•Co-operative patient.•Growing patients-afford more space.www.indiandentalacademy.co
m
5
.
A) M-B cusp tips of the upper 1st molar.
B) Buccal groove at the middle of the buccal surface of the lower molar.
Subtract B from AMean difference in normal
occlusion:Males: 1.6mmFemales:1.2mm
2. Ashley Howe’s index.
Estimation of need for expansion
Dental constriction with good skeletal transverse dimension.
Based on cephalogram ,model analysis: to quantify arch length tooth material discrepancy. Up to 5mm
www.indiandentalacademy.com
6
Expansion:
Coffin springs Slow expansion
Screws.
Removable
Fixed
RME Quad helix W arch Arch Wire
SkeletalDentoalveolar
Jack screws used in removable – slow expansion
In fixed- quad helix, w arch can be used.
www.indiandentalacademy.com
7
Coffin spring•Walter H. Coffin 1881
•Indications:Slow dentoalveolar expConstricted upper arch
APPLIANCE CONSTRUCTION:1.25mm hard round S.Steel wire.U or Omega shaped wire.Stands 1mm away from palate.Retention from Adam’s clasps on U6,U4 or E
Removable appliances:
www.indiandentalacademy.com
8
Appliance activation.
Range of activation 2-4 mm before insertion.
Disadvantage:Dislodgement of clasps from the teeth.Heavy intermittent force. Patient compliance.
www.indiandentalacademy.com
9
Expansion ScrewsBaseplate used as working part, divided and driven apart by screws.•An equal division-create reciprocal anchorage for both parts.•Unequal:larger-added anchorage for movement of smaller part/s.F/A more.•90 degrees-plates move apart by 0.2mm.•PDL-0.1mm on each side.•Schwartz- first to use this type of plate.•254types.but basic principles same.Encased screws
Skeleton screws
• SIZESMaxillary-broaderMandibular-narrower
www.indiandentalacademy.com
10
Skeleton type.
Bertoni screw.
Encased screw.
www.indiandentalacademy.com
11
Schematic sagittal section:
www.indiandentalacademy.com
12
Activation of the screws in removable appliance:
•1mm/complete revolution.•0.25mm of tooth movement/quarter turn.•Rate of active movement not exceed 1mm/month•Only twice a week-1mm bilateral movement.•Turn screw with appliance in mouth.•Don’t remove it for several hrs after activation-better chance of fit.
www.indiandentalacademy.com
13www.indiandentalacademy.co
m
14
All split appliances – only tipping tooth movement(edge of plate contacts each tooth at only one point) no couple.
Activation of screw produces heavy intermittent force.
Initial high and rapid decay- potential of damaging the tooth.
Limited indications .
Disadvantages of removable appliances.
USAGE WITH FUNCTIONAL APPLIANCES.
www.indiandentalacademy.com
15
Lower Schwartz appliance:Indications:Mild to moderate lower ant crowding,Lingual tipping of post teeth.Activation:once/week0.20 to 0.25mm of expn in midline.3-4months; gain 4-5mm of arch length anteriorly.PURPOSE: orthodontic tipping, uprighting. www.indiandentalacademy.co
m
16
Upper Vs Lower expansion stability:
Upper – more stable. Lower – before canine eruption.8-
9yrs. Force elimination:Frankel regulator.Lip bumper.
www.indiandentalacademy.com
17
Rapid Vs Slow Maxillary Expansion.
Expansion across the suture
Rapid
Slow2 schools of thought - rate of palatal splitting:
1. Rapid expansion: 2-4weeks:min tipping & max skeletal displacement.
0.3-0.5mm/day. Force build up to 10-20pounds.2. Slow expansion: 1mm/week for 2-6months. 2-4pounds of
pressure –optimum.The ratio of skeletal to dental exp is 1:1 from the beginning.More physiological response.www.indiandentalacademy.co
m
18www.indiandentalacademy.co
m
19
Rapid Maxillary Expansion:
•Skeletal expansion, separation of the mid-palatal suture• Maxillary shelves away from each other.
HISTORY:Emerson C. Angell 1860E.N.T Surgeons.Korhkaus and Andrew Haas in 1950’s
www.indiandentalacademy.com
20
Indications:
Unilateral/bilateral discrepancies. Skeletal/dental constriction. Gain arch length in cases of moderate
crowding. AP discrepancies-class II div I, class III. Inadequate nasal capacity- chronic respiratory
problems.
www.indiandentalacademy.com
21
Contra indications:
Single tooth cross bite Vertical growers-steep mandibular plane angle. Pre school children.(fig) Non compliant patients.
www.indiandentalacademy.com
22
Fig:
www.indiandentalacademy.com
23
Principle:
Rapid heavy force to teeth- no sufficient time for teeth to respond.
Transferred to the suture, which opens.
While teeth move minimally relative to their supporting bone.
www.indiandentalacademy.com
24
Sutural patency.•Vital to RME.•when and how quickly synostosis takes place?•Studies.•Earliest – 15yr girl. Oldest unossified-27yr woman.•In general, bony spicules : 15-19yrs.•Greater obliteration posteriorly.•On avg, 5% closed by age of 25 yrs.•Optimal age-before 13-15yrs. Later unpredictable.•OCCLUSAL RADIOGRAPH.www.indiandentalacademy.co
m
25
Effects of RME
On the maxilla.
www.indiandentalacademy.com
26www.indiandentalacademy.co
m
27
Krebs (1964) : 2 halves of maxilla rotate in Sagittal
Coronal
Coronal plane: 2 halves move away from each other.Fulcrum of rotation around the fronto-maxillary suture.
Sagittal plane: rotate in downward and forward direction.
Final position: unpredictable. Partially/complete relapse.www.indiandentalacademy.com
28
RME in deciduous and mixed dentition produces, downward and forward rotation of the palatal plane. Increase in the upper
anterior facial height(N to ANS) Point A is also moved anteriorly.www.indiandentalacademy.co
m
29
Triangular split of maxilla.A. Transverse view B. Frontal
view
www.indiandentalacademy.com
30
Coronal Section at the level of 1st molars
The mid palatal suture opens with an inverted V shape ,the maxillae separate, the alveolar ridges tip and bend buccally,the teeth move bodily and also tip within the alveoli,and the mucoperiosteum of the palate stretches.
www.indiandentalacademy.com
31
The typical triangular opening of the median palatal suture confirms the separation of the maxillary process during the RME.similar opening-in superio-inferior direction.Max-oral side,less on nasal side.
The median palatine suture is repaired totally after 90 days of active phase of expansion.
Greater opening
www.indiandentalacademy.com
32
Evident splitting of the maxillaRepresents the so called Orthopedic effect.
Nasal cavity widened. Floor and lateral walls by maxillary process.
www.indiandentalacademy.com
33
1. Before treatment. 2. During treatment. 3. After treatment
1.
2.
3.
www.indiandentalacademy.com
34
Effects on:Maxillary anterior teeth: diastema. ½ the distance the screw has opened.By 3-4months closes.Maxillary posterior teeth:fig
Mandible: swing downwards and backwards.(disagree)
www.indiandentalacademy.com
35
Changes in angle of tooth inclination
1st during active RME2nd after RME during controlled
relapse.
.’. Need to overcorrect to compensate for the
subsequent up righting of the teeth.
www.indiandentalacademy.com
36
Effects On Nasal Air Flow: Anatomically:Increase in width of nasal cavity at the
floor,outer walls of the nasal cavity move laterally. Air flow resistance reduced by 45% thereby improving
nasal breathing.
Total Effect: Increase in the inter nasal capacity.
Wertz(1968): opening the palatal suture for purpose of increasing the nasal airway, cannot be justified unless the obstruction is in the lower anterior portion of the cavity accompanied by a relative maxillary width deficiency.
www.indiandentalacademy.com
37
Types of RME Screws.
Tooth and tissue borne Tooth borne
Derichsweiler Haas Issacson Hyrax
BandedBonded
www.indiandentalacademy.com
38
Derichsweiler appliance.
Retentive tags
www.indiandentalacademy.com
39
Haas Appliance
1.2mm S.steel wire
www.indiandentalacademy.com
40
Hyrax type of Screw.
www.indiandentalacademy.com
41
Issacson expansion applianceUsing Minne expander.
A coil spring having a nut to compress the
spring.
ACTIVATIONExpander activated by closing the nut so that
the spring gets compressed.
www.indiandentalacademy.com
42
Bonded RME1. Cast Cap Splints.
2. Acrylic cap splints.
www.indiandentalacademy.com
43
Bonded Rapid Palatal Expansion appliance.
www.indiandentalacademy.com
44
Activation Schedule:TIMMS:
•Upto 15yrs: 90 degrees rotation in morning and evening.•Over 15yrs: 45 degrees activation 4 times a day.•Over 20yrs: initial 90 degrees, 45 degrees morning and evening.Surgical intervention.
ZIMRING and ISSACSONYoung growing patients: 2 turns/day for 4-5 days.later 1turn/day till desired expansion.Non growing adult: 2 turns for 1st two days, 1turn/day for next 5-7 days. And 1 turn every alternate day.www.indiandentalacademy.co
m
45
How much to expand?
STABILITY:
1. Growing patients.
2. Before the eruption of canines.
3. Self retention of cross bite correction.www.indiandentalacademy.com
46
Surgery as an adjunct:
•Unusual resistance to separation-surgical intervention.
•Females over 16yrs, males over 18yrs.
Surgery ( SARPE ) / surgery + RME
(distraction osteogenesis)
Palatal osteotomy.
Lateral maxillary osteotomy.
Anterior maxillary osteotomy. www.indiandentalacademy.co
m
47
Clinical Tips: 4/4 Xn postpone. No prior orthodontic
movement. Activate, 15-30min
after insertion. String/dental floss tied. See patient at regular
intervals. Monitor with weekly
occlusal radiographs.
Open within 7-10 days. Retention: 3-6months. TPA can be placed. Symptoms on
premature removal. Dizziness,heavy
pressure, face.blanching of soft tissue. 19hrs.
Always seated.
www.indiandentalacademy.com
48
Fixed Expansion appliancesQuad Helix
Evolved- original coffin loop.4 helices - increase range and springiness of the appliance.Anterior helices bulk-serve as reminder.
2 types: fixed removable
Indications:•Bilateral posterior cross bite. •Finger sucking habit.
www.indiandentalacademy.com
49
38 mil S.Steel wire.Li wire contact teeth in crossbite.1-2mm distal.
•Over correction.
•Soft tissue irritation.
•3 months of retention.
Molar rotation
Slow dentoalveolar expansion. 2mm/month.1mm on each side,until cross bite over corrected.In primary and early mixed dentition- skeletal midpalatal splitting.
ACTIVATION
www.indiandentalacademy.com
50
W ARCH• Originally used by Ricketts.•36mil S.Steel wire.•1-1.5mm short of palatal soft tissue.
ACTIVATION: •2mm/month. Duration 2-3months.•Remove and then activate.•3 months retention.
www.indiandentalacademy.com
51
Unequal W arch to correct true unilateral maxillary
constriction.Side to be expanded- fewer
teeth than the anchorage unit.
www.indiandentalacademy.com
52
Nickel Titanium palatal expander-Wendell V. Arndt JCO 1993 march
Tandem loop Ni Ti palatal expanderLight continuous forces.Simultaneous up righting, rotating and distalization of the molar.Transition temp 94 FSizes-8 diff molar widths.27mm – 47mm.force 180-300g
www.indiandentalacademy.com
53
Degree of compression at 20 degrees below the transition temp. B. effect of shape memory when the wire is warmed to body temperature.
. Passive appliance. B.initial activation and insertion for expansion and distal molar rotation. C. After expansion and
rotation correction.www.indiandentalacademy.com
54
Nitanium Palatal Expander 2
Maurice C. CorbettJCO April 1997.
Uniform slow continuous forces.
Maintains the tissue integrity.
Regeneration = rate of expansion.
ACTION
Shape memory and transition temp.
www.indiandentalacademy.com
55
APPLIANCE SELECTION Available in 10 sizes, from 26mm to 44mm. Determination of the size of expander. NPE 2 delivers a force of 350g in 3mm increments. If 4mm expansion ,initial force higher, later return to 350g
once 3mm expansion occurs. Preprogrammed, .’. Self limiting. TETRA FLUOROETHANE refrigerant spray. In mouth begins to warm,NiTi stiffen-shape memory. Completed in 2-4months. Retention-2-3months.
www.indiandentalacademy.com
56After 3 months of expansion with NiTi palatal expander 2
After Initial placement.
Ligature should be tied.
www.indiandentalacademy.com
57
Lip Bumper
Gain arch length in mild to moderate crowding cases.
Stainless steel 36mil in0.045”tubing or coated in acrylic and inserted into the molar tubes.
The lateral arms remove the resting pressure of the buccal musculature .’. Allow the unopposed action of tongue – increases arch width
Bodily forward movement of incisor, labial flaring, distal tipping of molars.
Pressure exerted on the shield-100-300g
LIP BUMPER.
www.indiandentalacademy.com
58
CETLIN’S LIP BUMPER
Reinforce anchorage.
Molar distalization.
Middle of the crown.Canine 2mm. Premolar
3mm.
www.indiandentalacademy.com
59
DENHOLTZ LIP BUMPER /muscle anchorage appliance.
Upper lip contraction and exercises, exert distalizing force via
the coil spring.
www.indiandentalacademy.com
60
T.P.A
Functional appliances:Functional Regulator.
•0.036” S.Steel wire.
•Fixed or removable.
•Prevents mesial migration of U 6.
•Molar rotation. Maintain the inter molar width.
www.indiandentalacademy.com
61
5mm of expansion in the molar and the canine area.
Arch Expansion in Fixed Appliances:
•In conjunction with TPA / quad helix
Overlay wires used for arch expansion.
www.indiandentalacademy.com
62
PROXIMAL STRIPPING. Proximal surfaces sliced to reduce the M-
D width of the teeth. Conservative method-mild to moderate
crowding.3-5 mm of space requirement. Ballard – 1944. Routinely carried out in the lower
anterior region.
www.indiandentalacademy.com
63
Indications: Contra Indications:
3-5mm. Bolton’s excess. Aid in retention. Maintain the profile. Maintain Class I canine and
molar relation. Carey’s analysis:0-2.5mm
Young patients- high pulp chamber. High caries index. Poor oral hygiene. Enamel hypoplasia.
Advantages:•Borderline to non Extraction.
•A favorable overjet and bite can be estbl.(match the U and L tooth material)
•More stable results –contact area broadened.www.indiandentalacademy.com
64
Disadvantages:
Roughened proximal surface- plaque. Ledges, grooves. Excess tooth material reduction. Increased caries susceptibility Sensitivity. Alteration of the tooth morphology. Loss of contact- food impaction.
Conventional
Air rotor stripping.Methods
www.indiandentalacademy.com
65
Amount of proximal stripping:
Not more than 50% of enamel thickness
1. Metallic abrasive strips.
2. Safe sided carborundum discs.
3. Long thin tapered fissure bur.
www.indiandentalacademy.com
66
Air rotor Stripping method (ARS) John J. Sheridan in 1985. Removal in buccal segments (enamel thickest) 3-8mm of space requirement. More space than conventional. 1mm per contact point. No risk of cutting gingival tissue.
www.indiandentalacademy.com
67
Diagrammatic representation of ARS technique
www.indiandentalacademy.com
68www.indiandentalacademy.co
m
69
Topical fluoride applicationPolishing.
Useful therapeutic tool if done judiciously.
Excessive enamel reduction is irreparable;
Proximal surfaces must be shaped as naturally as possible.
Polishing.
Done properly- no effects on interproximal tissue and bone.
www.indiandentalacademy.com
www.indiandentalacademy.com 70
Thank you
For more details please visit www.indiandentalacademy.com