rates and air pressures as conven- tional nozzles. Nozzle operation is similar to conventional blast noz- zles. Circle 429 on the reader service card

POWDER COATING OVENS

Precision Quincy Corp., Woodstock, Ill.

In addition to offering over 200 ovens in a variety of standard sizes, temperature ranges, and configurations, Precision Quincy also modifies existing specifica- tions to suit particular applica- tions. This 450” oven for powder coating parts for the aeronautical industry feature a low-No, gas burner. Circle 430 on the reader service card

SPRAY WASHER

Proceco Inc., Jacksonville, Flu.

The Proceco model RNW washer was designed for in-process or final cleaning of newly manufactured products. The standard model is of- fered with one or two recirculating

stages and includes a manual trol- ley for easy workpiece loading and transport between workstations. Workpieces remain stationary in the spray cabinet while dual rotary nozzle frames provide spray cover- age of all surfaces. The optional Proceco Autoloader can be used for fully automatic in-line processing with conventional roller conveyor systems whether parts are pallet- ized, loaded in baskets, or rolled directly on the conveyor. Circle 431 on the reader service card

METERING PUMPS

Pulsafeeder, A Unit of IDEX Corp., Punta Gorda, Flu.

Pulsafeeder’s enhanced Chem- Tech Series CTP peristatic meter-

) Novalytes . . .

) Aldolytes...

to brighten, purify and control plating results!

to purify, enhance and brighten your zinccopper, and nickel plating!

) Aldacs...

1 Aquations...

to clean up aluminum, steel, iron, brass, and copper!

to remove suspended solids and sludges, recover oil, treat alkaline cleaners and heavy metal affluents!

) Aldo-Kotes... for brighter chromate conversion coatings in a variety of colors for zinc, aluminum, galvanized and cadmium-plated surfaces!

1 Alloy Plating... Cyanide-free zinc alloys of iron, cobalt, nickel and copper!

Circle 005 on reader information card

September 1999 115

ing pumps feature a &second timer for greater turn-down pre-

cision, greater corrosion resis- tance in the wetted end materials, and improved motor gear assem- bly for quiet operation. The series incorporates an on/off motor drive for starting and stopping the feed assembly, eliminating the need for a clutch that can wear out and require replacement. Automatic degassing allows trouble-free me- tering of sodium hypo~hlorite, peroxide, and other gas-producing solutions. Circle 432 on the reader service card

B-9 NICKEL STRIPPERS The only one-component, non-toxic powdered immersion nickel strippers on the market, removes nickel from steel, copper, brass and zinc diecast.

pW ELECTRODES

Sensorex Inc., Stanton, Calif:

ful, highly efficient continuous- duty motors allow these pumps to operate nonoverloading and pro- vide continuous flow with liquids up to 1.3 specific gravity. Series X pumps provide flow rates from 1 to 25 gal/min. They are available in polypropylene, PVDF, or ETFE, depending upon the model selected.

NO ELECTRICI~ NO CYANIDES NO PHOSPHATES NO CAUSTIC AMINES NO AMMONIA NO FUMES

Circle 434 on the reader service card

CYCLONES

Sternuent Co. Inc., Bogota, NJ.

5 FORMULATIONS l B-9 Formula removes electrolytic

and electroless nickel from steel l B-9 Plus for use by shop

operators on all substrates l B-929 Formula strips nickel from

zinc diecast, copper, brass, silver and gold with no etching of the softer substrates

l B-913 Removes nickel from alumi num with no hydrogen embrittlement aftereffects

l B-9 Nickel-iron strips nickel-iron

More powerful, high-perfor- mance, low-cost Sternvent cy- clones now have the fan located on the clean air side for safety and maintenance. All cyclones are available with rubber lining for resistance to abrasive dusts. Ba- sic models range from 800 to 15,000 cfm. All models, from 2 to 75 hp, can exhaust outside or, when equipped with a Sternvent after-filter, can save on fuel costs

alloy from ferrous substrates with no attack

Military and Aerospace Specs New Batch Waste Treatment method METALX B-9 NICKEL STRIPPERS

GET THE JOB DONE!

A

METALX, INC. 2600 R&y Matin Rd. lenoir, NC 28645

- l-704-758-4997 Fax 1~704-7586033 %b address barry@hvove.net

Circle 056 on reader information card

Sensorex flat-surface, self-clean- ing pH/ORP electrodes self-clean the measuring surface when ex- posed to turbulent flow. The non- protruding surface prevents elee- trode breakage and provides abrasion-resistant operation. All pH/ORP electrodes are easy maintenance, cartridge-type com- bination electrodes with quick- disconnect BNC connectors allow- ing users to install or remove an electrode in seconds without tools. Circle 433 on the reader service card

~GN~~COUP~D PUMPS

Serfilco Ltd., N5rtkb~ook, Ill.

Serfilco announces the availabil- ity of its Series X magnetic- coupled pumps for aqueous, acid, caustic, plating, photographic, and other applications from water at ambient temperatures to harsh chemicals at elevated tempera- tures. Strong magnets and power-

by recirculating air indoors. Circle 435 on the reader service card

VALUABLE lNFORMATION

ABOUT EVERY FACET OF THE METAL FINISHING

INDUSlRY

Call for a FREE Book List

Fred Freyer 914-333-2578

116 Metal Finishing