metering handwash faucet - delta commercial...
TRANSCRIPT
Metering Handwash Faucet
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Page 6.C.1
Flowrates are at 60 PSI.Refer to www.specselect.comfor individual models. Note: Use this page front and back as a product submittal sheet.
SPECIFICATION: (example)• HEAVY-DUTY CAST BRASS
single hole mount faucet• Polished chrome plated finish• Vandal Resistant Brass Handle activator• Delta® metering slow close cartridge• Two Body mounted stainless steel
Anti-Rotation locking pins• Vandal resistant spout outlet• Total flow not to exceed 0.25
gallon per handle activation❏ 87T104 With Push Button❏ 87T105 With Lever Handle
ADA compliant requires less than 5 lbs. operating force
(Formerly 86T Series)
SPECIFICATION: (example)❏ 86T1104• Single hole mount faucet• Polished chrome plated finish• Vandal Resistant brass push button• Delta® metering slow close cartridge• Vandal resistant spout outlet• Total flow not to exceed 0.25
gallon per handle activation
❏ 86T0104• Same as 86T1104 but with (86T151)
4'' cast brass, polished chrome platedcoverplate
SPECIFICATION: (example)• HEAVY-DUTY CAST BRASS
single hole mount faucet• Polished chrome plated finish• Vandal Resistant Brass Handle activator• Delta® metering slow close cartridge• Two Body mounted stainless steel
Anti-Rotation locking pins• Mixing tee and inlet checks• Vandal resistant spout outlet• Total flow not to exceed 0.25 gallon
per handle activation❏ 87T110 With Push Button❏ 87T111 With Lever Handle
ADA compliant requires less than 5 lbs.operating force
(Formerly 86T Series)
87T104 86T1104
87T151
COVERPLATESPECIFICATION: (example)❏ 87T151 with center faucet hole,
two holdown shanks• HEAVY DUTY FORGED CAST BRASS• 102mm (4'') center• Polished chrome plated finish• With locating holes for 87T104,
87T105, 87T110 and 87T111metering faucets with anti-rotationlocking pins
• For secure Public WashroomFaucet/Fixture Installations
87T111
Engineer/Architect Approval
Model Specified:
Approval: Date:
Approvals:• CSA certified• Complies to ASME A112.18.1• Lever Handle ADA Compliant and meets
Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force.
• IAPMO listed(Contact Delta Representative for State and/orLocal Approvals.)
Metering Handwash Faucet
FLOWRATE vs PRESSURE
87T104 - 87T111 - LOCKING PINS
87T111
86T110487T151
56mm(2.2”)
108mm(4.25”)
89mm(3.5”)
51mm(2.0”)
29mm (1.13”)MAX. DECKTHICKNESS
25mm(1.0”)
41mm(1.62”)
INLETS - 1/2'' MIP/Coupling NutsNote: Measurements may vary ± 6mm (0.25'')
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.DSP-87T
Refer to www.specselect.comfor individual models. Note: Use this page front and back as a product submittal sheet.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Page 6.C.2
0 0 0
Engineer/Architect Approval
Model Specified:
Approval: Date:
PRODUCT VARIATION OUTLET HANDLE
®
2 22
1 11
3 33
5 55
7 77
9 99
4 44
6 66
8 88
DESCRIPTION PRODUCT NO.Mixing Metering Handwash Faucet 86T1 5
✔ ✔ ✔
Flowrates are at 60 PSI.Refer to www.specselect.comfor individual models. Note: Use this page front and back as a product submittal sheet.
Mixing Metering Handwash Faucet
Specification: (example)• HEAVY-DUTY CAST BRASS• Two handle mixing metering faucet• Vandal resistant handle actuator• Vandal resistant spout outlet• Polished chrome plated finish• Delta® metering slow close cartridge• Total flow not to exceed 0.25 gallon
per handle activationand ...with ... (add product variation required)with ... (add handle required)
86T1153
86T1350
102mm (4'')Centersetwith OpenGrid Strainer
Vandal ResistantPush Button (For Product VariationNo. 3 Only)
102mm (4'')Centersetless Pop-up
Widespread Faucet, Cast Spout,less Pop-up
Vandal Resistant ADALever Handle (For Product VariationNo’s 0, & 1 Only)
Vandal Resistant0.5 USGPM (1.9 L/min)Flow Control Non-Aerating Spray Outlet
✔
Mixing Metering Handwash Faucet
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.DSP-86T
Refer to www.specselect.comfor individual models. Note: Use this page front and back as a product submittal sheet.
Approvals:• CSA certified• Complies to ASME Standard A112.18.1• Lever Handle No. 3 ADA Compliant and
meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force.
• IAPMO listed(Contact Delta Representative for State and/orLocal Approvals.)
FLOWRATE vs PRESSURE
OPEN GRID STRAINER(supplied with Product Variation 0)
86T1153
Use of check valves or check stops is recommended to prevent possiblecross-flow.
Note: Measurements may vary ± 6mm (0.25'')
SPOUT ASSEMBLIESDIMENSIONS “A” “C” “L”
SPOUT TYPE mm in. mm in. mm in.
Cast Spout 114 4.5 15 0.6 51 2
CAST “D”SPOUT
OUTLET NO. mm in.
5 11 0.45
INLET FOR 3/8" OR 1/2" FLEXIBLE RISER OR 1/2-14 NPSM COUPLING NUT (SUPPLIED)
32mm (1.25") 3 HOLES (1.75") (1.75")
44mm 44mm
(2.0") 51mm
(6.0"-16.0") 152-406mm
27mm (1.06") MAX .
114mm (4.5")
1/2" IPS A D APTER
10 o
51mm (2.0")
52mm (2.06")
508mm (20") S.S . CONNEC T ORS
66mm (2.6")
C D
L
86T1350
Metering Urinal Valvefor Washdown Urinals
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Page 6.C.3
Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
Engineer/Architect Approval
Model Specified:
Approval: Date:
SPECIFICATION: (example)• HEAVY-DUTY, back inlet supply• CAST BRASS valve for 3/4'' IP spud urinal• Polished chrome plated finish• Delta® metering slow close cartridge• Chrome plated union inlet stop• Brass oscillating lever handle, coupling nuts, inlet cover tube• Set screw wall flange, spud flange, outlet tube • 1/2'' universal FIP/copper sweat inlet
For Washdown Urinals❏ 86T505
SPECIFICATION: (example)• HEAVY-DUTY, back inlet supply• CAST BRASS valve for 3/4'' IP spud urinal• Polished chrome plated finish• Delta® metering slow close cartridge• Chrome plated brass coupling nuts, inlet cover tube• Wall flange, spud flange, outlet tube• 1/2'' universal FIP/copper sweat inlet
For Washdown Urinals❏ 86T500
with vandal resistant brass push button❏ 86T502
with brass oscillating lever handle
SPECIFICATION: (example)• HEAVY-DUTY, top inlet supply• CAST BRASS valve for 3/4'' IP spud urinal• Polished chrome plated finish• Delta® metering slow close cartridge• Chrome plated brass coupling nuts, spud flange, outlet tube • 1/2'' universal FIP/copper sweat inlet
For Washdown Urinals❏ 86T501
with vandal resistant brass push button❏ 86T503
with brass oscillating lever handle
SPECIFICATION: (example)Vacuum breaker assembly for above urinal valves❏ 86T610
86T505
86T500
86T503
86T610
Metering Urinal Valvefor Washdown Urinals
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.DSP–86T505
Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
Approvals:• CSA certified• Lever Handle ADA
Compliant and meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force.
• IAPMO listed(Contact Delta Representative for State and/orLocal Approvals.)
FLOWRATE vs PRESSURE
86T505
86T505 with 86T61000
0
15
10 20 30 40 50 60 70 80 90 100
FLOW (l /min.)
FLOW (USGPM)
2
3
4
5
10
15
20
Line Pressure (psig)
INLETS - 1/2'' FIP/CopperNote: Measurements may vary ± 6mm (0.25'')
Extensions Available for Inlet Centersand for Outlet Tube Heights
121mm(4.75")
TOP OF FIXTURE
292mm(11.5")
1/2” FIP/COPPER
SWEAT INLET
121mm(4.75")
TOP OF FIXTURE
324mm(12.75")
1/2" FIP/COPPER
SWEAT INLET
OF FIXTURE
57mm(2.25")
LLaavvaattoorryy FFaauucceettss HDF®
®
®
U P C
COMPLIES WITH:• ASME A112.18.1• CSA B125• IAPMO Listed• CSA Certified• ASHRAE 90-80
Submitted Model No.:_______________________________________________Specific Features: __________________________________________________
701-HDF / 701-COLHDF
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90Pressure (PSI)
Flow
(U.S
. Gal
lons
Per
Min
ute) 6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per M
inute)
3 1/2" (89 mm)
1 1/8" (29 mm)
Max. DeckThickness
1/2"-14 NPSM
2" (51 mm)
1 1/2" (38 mm)
2" (51 mm)
4 1/4" (108 mm)
4 3/4" (120.6 mm)
■ Single Handle■ Slow Self-Closing■ Deck Mount Basin Faucet■ Single Hole Sink Applications
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP-701-HDF Rev. D Page 6.C.4
STANDARD SPECIFICATIONS:• Single handle, slow self-closing faucet.
For single hole deck mount applications.• Solid brass fabricated body.• Metering, vandal resistant, slow-close push handle.
Plain (701-HDF) Cold (701-COLHDF)• 4 1/4" (108 mm) rigid spout.• .5 gpm (1.9 L/min) vandal resistant spray outlet.
Total flow per actuation must not exceed .25gal./cycle (1.0 L/cycle).
• All operating parts must be replaceable from above the deck.
• 1/2"-14 NPSM threaded male inlet shank.
LLaavvaattoorryy FFaauucceettss HDF®
■ Two Handle■ Deck Mount■ 2 and 3 Hole Sink Applications■ 4" (102 mm) Centerset
Submitted Model No.:_______________________________________________Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:• Two-handle slow self-closing faucets. For two and
three hole deck mount applications.• 4" (102 mm) centerset.• 3 7/16" (87 mm) long spout.• Metering, vandal resistant, slow-close push handle.• No lift rod hole.• Metal grid strainer (2517).• .5 gpm (1.9 L/min) vandal resistant spray outlet.
Total flow per actuation must not exceed .25 gal./cycle (1.0 L/cycle).
• All operating parts must be replaceable from abovethe deck.
• 1/2"-14 NPSM threaded male inlet shanks.
2507-HDF
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90Pressure (PSI)
Flow
(U.S
. Gal
lons
Per
Min
ute) 6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per M
inute)
1" (25 mm)
Max. DeckThickness
2" (51 mm)
1 3/8" (35 mm)
1/2"-14 NPSM
1 5/8" (42 mm)
to2 3/8"
(61 mm)
2 1/8" (54 mm)
Dia.
1 3/8" (35 mm)
Dia.8"
(203 mm)
1 1/4" (32 mm) Dia.
2517-HDF
3 7/16" (87 mm)
4" (102 mm)
2 5/8" (67 mm)
4" (102 mm)
6" (152 mm)
METAL GRID STRAINER
®
®
U P C
COMPLIES WITH:• ASME A112.18.1• CSA B125• IAPMO Listed• CSA Certified
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Page 6.C.5 DSP-2507-HDF Rev. D
2" (51 mm)
LLaavvaattoorryy FFaauucceettss HDF®
®
®
U P C
COMPLIES WITH:• ASME A112.18.1• CSA B125• ASHRAE 90-80• IAPMO Listed• CSA Certified
■ Two Handle■ Widespread■ Slow Self-Closing■ Three Hole Sink Applications■ 6"-16" (152 mm-406 mm) Centers
Submitted Model No.:_______________________________________________Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:• Two handle, slow self-closing faucets for three
hole deck mount applications.• Widespread 6"-16" (152 mm-406 mm) centers.• Solid brass fabricated end valve and spout bodies.• No lift rod hole.• Metal grid strainer.• Metering, vandal resistant, slow-close push handles.• 4 3/4" (121 mm) long, rigid spout.• .5 gpm (1.9 L/min) vandal resistant spray outlet.
Total flow per actuation must not exceed .25 gal./cycle (1.0 L/cycle).
• All operating parts must be replaceable from above the deck.
• 3/8" O.D. copper supply tube inlets with 1/2"-14 NPSM adapters.
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90Pressure (PSI)
Flow
(U.S
. Gal
lons
Per
Min
ute) 6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per M
inute)
8"(203 mm)
3514-WFHDF
1 3/8" (35 mm)
Dia.
1 5/8" (42 mm)
to2 3/8"
(61 mm)
2 1/8" (54 mm)
Dia.
1 1/4" (32 mm) Dia.
3/8" O.D.
CopperTubing
1/2"-14 NPSM
1 1/8" (29 mm)
Max. DeckThickness
2 1/16" (52 mm) 1"
(25 mm)Dia.
FlexibleHose
Connection
2" (51 mm)
Dia.
1 1/8" (29 mm)
Dia.
6"-16" (152 mm-406 mm)
Centers
7 5/8" (194 mm)
7 5/16" (186 mm)
2 1/4" (57 mm)
4 3/4" (121 mm)
3514-WFHDF
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP-3514-HDF Rev. B Page 6.C.6