Metallic look jewelry set

SUPPLIESNEEDED:

step 1: preparing your materials

Prepare your work environment. Organizing your tools and materials will help

you work faster and more efficient.

Use the cutting tool to cut two pieces from each chain:

Nickel chain – 9cm long

Bronze matte chain – 9.5cm long

Gold chain – 10cm long

Step 2 : connecting the base of the necklace

Connect the 29ss cup chain with 5mm jump rings to the connectors.

Connect the 39ss cup chain with 6mm jump rings to the connectors.

Use 5mm jump rings and connect the three chains to the connector, on both sides.

Connect all three chains together using 5mm jump rings.

Hang the clasp on one side and the extension chain with metal label and Swarovski stone on the other side.

Step 4 : hanging the 39ss settings

Use 6mm jump rings to hang the metal flowers on the cup chain.

Step 5 : setting the stones

Place the stone in the center of the stone setting and with the help of the setting tool bend the prongs towards the stone in order to embed it.

Apply small amount of E6000 glue in the metal flowers and place the 24ss stones in there place at the center of the flowers.

Wonderful! The necklace is ready! Enjoy your new beautiful Swarovski necklace. Gita team.