metal system overview - building products index · perforated rg 2516 with premium op19 (6715) 0.95...
TRANSCRIPT
CEILING&waLL
Between us, ideas become real i ty ®
SYSTEMS
mmetalceilings& walls
AXAL VECTOR Lay-in solution with square tiles Square edged 6 mm reveal detail, semi-concealed system
Grid Prelude 24 XL2
Modules 500 x 500 mm 600 x 600 mm 675 x 675 mm 750 x 750 mm Additional rectangular module available 300 x 600 mm
BOARD Lay-in solution with square tiles Square edged
Grid Prelude 24 tLX
Modules 600 x 600 mm 625 x 625 mm Additional rectangular module available 600 x 1200 mm
MICROLOOK 8 Lay-in solution with square tiles Square edged, with 8 mm drop
Grid Prelude 15 XL2 / tL Design option Silhouette XL2
Design option interlude XL2
Modules 500 x 500 mm 600 x 600 mm 675 x 675 mm 750 x 750 mm Additional rectangular modules available 600 x 1200 mm 300 x 1200 mm
MICROLOOK 16 Lay-in solution with square tiles Square edged, with 16 mm drop
Grid Prelude 15 XL2 / tL
Modules 500 x 500 mm 600 x 600 mm 675 x 675 mm 750 x 750 mm
Axal Vector
Board
MicroLook 8
MicroLook 16
SQuAre & rectANGuLAr tiLeS - LAY-INBENEFITS■ Diversity of design and application■ easily assembled and fully
demountable■ An easy to install, fl exible system■ cost effective ceiling solution
■ Semi-concealed grid for a monolithic effect
■ Axal Vector provides easy access to the ceiling void (ventilation duct, electrical lines etc.) as it is downwardly demountable
APPLICATION AREAused in a variety of ceiling areas: from small service rooms to large commercial offi ce buildings and major transportation terminals.
SQUARE & RECTANGULAR TILESLay-In - Axal Vector / Board / MicroLook 8 / MicroLook 16
Project: South roof office Block - South terminal - Gatwick Airport (uK) :::::::: oWNer: BAA PLcArchitect: Area 2 Limited :::::::: coNtrActor: South ridge interiors Ltd
SoLutioN: Axal Vector rg 0701 extra Microperforated with Fleece Perforations Page 46
Acoustic performances Pages 47-49
metal ceilings & walls :::: 19
•••••••••••
1.2
1.0
0.8
0.6
0.4
0.2
0
aP
125 250 500 1 000 2 000 4 000
CEILING&waLL
Between us, ideas become real i ty ®
SYSTEMS
Metal system overview
Light reflectance
Pattern RAL 9010 Global White
Plain (unperforated) 85% 75%
Ultra Microperforation 83% 73%
Extra Microperforation Rg 0701 with black acoustic fleece 80% 70%
Standard Perforation Rg 2516 with black acoustic fleece 70% 65%
Microperforation Rd 1522 with black acoustic fleece 65% 60%
Measured in accordance with EN ISO 7742-2 & EN ISO 7742-3.
Recycled ContentRH 95%
Standard perforation patterns
Acoustical infill options
Colour
Ultra MicroperforationRg 0501 Hole diameter: 0.5 mm Open area: 0.64 %
Extra Microperforation Rg 0701Hole diameter: 0.7 mm Open area: 1.5 %
Microperforation Rd 1522Hole diameter: 1.5 mm Open area: 22 %
Standard PerforationRg 2516Hole diameter: 2.5 mm Open area: 16 %
Further perforations are available on request.
Standard colourRAL and NCS are the most widely used colour systems in the construction industry. Armstrong uses RAL 9010 White as its standard colour.
Special coloursArmstrong offer all RAL and NCS colours for your custom solutions.
RAL 901020% gloss
Global White12% gloss
RAL 900630% gloss
RAL 9007 30% gloss
Acoustic FleeceNon-woven acoustic fleece provides a cost effective solution for general sound absorption requirements. As a solution that is bonded to the reverse of the metal tile it helps eliminate pattern staining issues that may occur with loose laid solutions.
Premium B15Premium B15 acoustic solutions have been developed to achieve a wide range of performance values for both sound absorption and sound attenuation. It combines the non-woven acoustic fleece with a 15mm mineral infill board as a factory fitted acoustic solution.
Premium OP19Premium OP19 provides high sound absorption performance utilising specially developed lower density Armstrong mineral infill boards. Premium OP19 infill can achieve up to Class A sound absorption.
Acoustic fleece black, 63 g/m2 Premium OP19Premium B15
Check out our new website and find solutions using the latest selection criteria: Product type shape, dimension, application, acoustic solutions and much more.
The Armstrong standard and configurable metal range:
Linear Grid
Tartan Grid
Vertical Baffles
Open Cell Ceilings
Corridor Ceilings
Island Ceilings
Wall Cladding
■ Hook-On - B-H 300, Lay-In - B-L 302
■ Clip-In - K-Clip, Hook-On - K-H 400
■ Hook-On - V-P 500 / V-K 500
■ Lay-In - Cellio
■ Hook-On - F-H 600, Lay-In - F-L 601, Clip-In - F-Clip Access
■ Clip-In - D-Clip, Hook-On - D-H 700
■ Hook-On - W-H 1000 / W-H 1100
Our website...
www.armstrong-ceilings.co.uk www.armstrong-ceilings.iePA
S12
05
A
rmst
rong
Bui
ldin
g P
rod
ucts
R
.C.S
. Bes
anço
n B
784
131
575
P
rinte
d in
E.C
. on
chlo
rine
free
pap
er fr
om s
usta
inab
le r
esou
rces
.
Technical datasheetsMetal catalogue
A large selection of brochures...
DncwUltra Microperforation - no infill (2258) = 18 dBStandard Perforated Rg 2516 with fleece (2437) = 20 dBMicroperforated Rd 1522 with fleece (2437) = 20 dBMicroperforated Rd 1522 with Premium OP19 (6719) = 27 dBStandard Perforated Rg 2516 with Premium OP19 (6719) = 28 dBExtra Microperforated Rg 0701 with fleece (2432) = 30 dBExtra Microperforated Rg 0701 with Premium OP19 (6720) = 31 dBExtra Microperforated Rg 0701 with B15 (2427) = 40 dBStandard Perforated Rg 2516 with B15 (2443) = 41 dBMicroperforated Rd 1522 with B15 (2443) = 41 dBPlain - no infill (2438) = 44 dBPlain with B15 (2439) = 47 dB
RwMicroperforation without fleece (5938) = 5 Rw
Standard perforation without fleece* (5938) = 5 Rw
Microperforation with fleece (5939) = 6 Rw
Standard perforation with fleece* (5939) = 6 Rw
Microperforation with Premium OP19 (6724) = 12 Rw
Standard Perforation with Premium OP19 (6726) = 13 Rw
Extra Microperforation with Premium OP19 (6725) = 15 Rw
Microperforation with B15 (5941) = 18 Rw
Standard perforation with B15* (5941) = 18 Rw
Plain - no infill (5936) = 19 Rw
Plain with B15 (5937) = 21 Rw
aw Class NRC 125 250 500 1000 2000 4000 Hz Plain - no infill (2206) 0.10(L) - 0.10 0.25 0.15 0.10 0.10 0.10 0.10 aP
Ultra Microperforation - no infill (2258) 0.40(LM) D 0.55 0.33 0.65 0.70 0.41 0.36 0.26 aP
Extra Microperforated Rg 0701 with fleece (2253) 0.55(L) D 0.65 0.45 0.75 0.70 0.55 0.55 0.45 aP
Microperforated Rd 1522 with B15 (2337) 0.60(H) C 0.60 0.40 0.40 0.50 0.65 0.75 0.90 aP
Perforated Rg 2516 with B15 (2340) 0.60(H) C 0.60 0.40 0.45 0.50 0.65 0.75 0.90 aP
Extra Microperforated Rg 0701 with B15 (2334) 0.65 C 0.60 0.40 0.45 0.55 0.70 0.80 0.70 aP
Extra Microperforated Rg 0701 with Premium OP19 (6714) 0.70 C 0.75 0.40 0.70 0.78 0.78 0.72 0.46 aP
Perforated Rg 2516 with fleece (L/2463) 0.75 C 0.70 0.40 0.75 0.65 0.65 0.75 0.75 aP
Microperforated Rd 1522 with fleece (2175) 0.75 C 0.80 0.30 0.75 0.90 0.65 0.75 0.80 aP
Perforated Rg 2516 with Premium OP19 (6715) 0.95 A 0.90 0.48 0.76 0.93 0.86 1.04 0.95 aP
Microperforated Rd 1522 with Premium OP19 (6713) 1.00 A 0.90 0.46 0.78 0.94 0.89 1.06 1.08 aP
EN ISO 354 & EN ISO 11654
EN 20140-9 & EN 717-1
EN ISO 140-3 & EN ISO 717-1
Acoustical performance
* Estimated1) All Sound Reduction Index (SRI) tests have been conducted in an
independent third party quality assured laboratory in accordance with EN ISO 140-3 with the ceiling suspended horizontally between two vertical transmission suites.
2) Rw values are determined in accordance with EN ISO 717-1. 3) Values for Standard Perforated (16% open area) are estimated as being
not less than Microperforated (22% open area).
System Integration Axal
Vector MicroLook 8 MicroLook 16
Tegular 2
Tegular 8 Tegular 11 F Tegular
16 Board Q-Clip / Q-Clip F
R-Clip / R-Clip F S-Clip F T-Clip F R-H 200 R-H 215 Board Mesh MicroLook 8
MeshTegular 8
MeshTegular 14
Mesh
DESIGN GRID SILHouETTE 15 ✔
DESIGN GRID INTERLuDE 15 ✔
PRELuDE 15 XL2 / TL ✔ ✔ ✔
PRELuDE 24 XL² ✔ ✔ ✔ ✔ ✔ ✔ ✔
PRELuDE 24 TLX ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
SYSTEM 3000 with SPRING A-BAR ✔ ✔ ✔
SYSTEM 3000 with J-BAR ✔
SYSTEM 3000 with H-PRoFILE 35 ✔
C-CHANNEL with SPRING T ✔
Latest information available on www.armstrong-ceilings.co.ukwww.armstrong-ceilings.ie
Octave Band Centre Frequency (Hz)
EN ISO 14021
≤ 30%
CEILING&waLL
Between us, ideas become real i ty ®
SYSTEMS
mmetalceilings& walls
AXAL VECTOR Lay-in solution with square tiles Square edged 6 mm reveal detail, semi-concealed system
Grid Prelude 24 XL2
Modules 500 x 500 mm 600 x 600 mm 675 x 675 mm 750 x 750 mm Additional rectangular module available 300 x 600 mm
BOARD Lay-in solution with square tiles Square edged
Grid Prelude 24 tLX
Modules 600 x 600 mm 625 x 625 mm Additional rectangular module available 600 x 1200 mm
MICROLOOK 8 Lay-in solution with square tiles Square edged, with 8 mm drop
Grid Prelude 15 XL2 / tL Design option Silhouette XL2
Design option interlude XL2
Modules 500 x 500 mm 600 x 600 mm 675 x 675 mm 750 x 750 mm Additional rectangular modules available 600 x 1200 mm 300 x 1200 mm
MICROLOOK 16 Lay-in solution with square tiles Square edged, with 16 mm drop
Grid Prelude 15 XL2 / tL
Modules 500 x 500 mm 600 x 600 mm 675 x 675 mm 750 x 750 mm
Axal Vector
Board
MicroLook 8
MicroLook 16
SQuAre & rectANGuLAr tiLeS - LAY-INBENEFITS■ Diversity of design and application■ easily assembled and fully
demountable■ An easy to install, fl exible system■ cost effective ceiling solution
■ Semi-concealed grid for a monolithic effect
■ Axal Vector provides easy access to the ceiling void (ventilation duct, electrical lines etc.) as it is downwardly demountable
APPLICATION AREAused in a variety of ceiling areas: from small service rooms to large commercial offi ce buildings and major transportation terminals.
SQUARE & RECTANGULAR TILESLay-In - Axal Vector / Board / MicroLook 8 / MicroLook 16
Project: South roof office Block - South terminal - Gatwick Airport (uK) :::::::: oWNer: BAA PLcArchitect: Area 2 Limited :::::::: coNtrActor: South ridge interiors Ltd
SoLutioN: Axal Vector rg 0701 extra Microperforated with Fleece Perforations Page 46
Acoustic performances Pages 47-49
metal ceilings & walls :::: 19
•••••••••••
1.2
1.0
0.8
0.6
0.4
0.2
0
aP
125 250 500 1 000 2 000 4 000
CEILING&waLL
Between us, ideas become real i ty ®
SYSTEMS
Metal system overview
Light reflectance
Pattern RAL 9010 Global White
Plain (unperforated) 85% 75%
Ultra Microperforation 83% 73%
Extra Microperforation Rg 0701 with black acoustic fleece 80% 70%
Standard Perforation Rg 2516 with black acoustic fleece 70% 65%
Microperforation Rd 1522 with black acoustic fleece 65% 60%
Measured in accordance with EN ISO 7742-2 & EN ISO 7742-3.
Recycled ContentRH 95%
Standard perforation patterns
Acoustical infill options
Colour
Ultra MicroperforationRg 0501 Hole diameter: 0.5 mm Open area: 0.64 %
Extra Microperforation Rg 0701Hole diameter: 0.7 mm Open area: 1.5 %
Microperforation Rd 1522Hole diameter: 1.5 mm Open area: 22 %
Standard PerforationRg 2516Hole diameter: 2.5 mm Open area: 16 %
Further perforations are available on request.
Standard colourRAL and NCS are the most widely used colour systems in the construction industry. Armstrong uses RAL 9010 White as its standard colour.
Special coloursArmstrong offer all RAL and NCS colours for your custom solutions.
RAL 901020% gloss
Global White12% gloss
RAL 900630% gloss
RAL 9007 30% gloss
Acoustic FleeceNon-woven acoustic fleece provides a cost effective solution for general sound absorption requirements. As a solution that is bonded to the reverse of the metal tile it helps eliminate pattern staining issues that may occur with loose laid solutions.
Premium B15Premium B15 acoustic solutions have been developed to achieve a wide range of performance values for both sound absorption and sound attenuation. It combines the non-woven acoustic fleece with a 15mm mineral infill board as a factory fitted acoustic solution.
Premium OP19Premium OP19 provides high sound absorption performance utilising specially developed lower density Armstrong mineral infill boards. Premium OP19 infill can achieve up to Class A sound absorption.
Acoustic fleece black, 63 g/m2 Premium OP19Premium B15
Check out our new website and find solutions using the latest selection criteria: Product type shape, dimension, application, acoustic solutions and much more.
The Armstrong standard and configurable metal range:
Linear Grid
Tartan Grid
Vertical Baffles
Open Cell Ceilings
Corridor Ceilings
Island Ceilings
Wall Cladding
■ Hook-On - B-H 300, Lay-In - B-L 302
■ Clip-In - K-Clip, Hook-On - K-H 400
■ Hook-On - V-P 500 / V-K 500
■ Lay-In - Cellio
■ Hook-On - F-H 600, Lay-In - F-L 601, Clip-In - F-Clip Access
■ Clip-In - D-Clip, Hook-On - D-H 700
■ Hook-On - W-H 1000 / W-H 1100
Our website...
www.armstrong-ceilings.co.uk www.armstrong-ceilings.ie
PAS
1205
Arm
stro
ng B
uild
ing
Pro
duc
ts
R.C
.S. B
esan
çon
B 7
84 1
31 5
75
Prin
ted
in E
.C. o
n ch
lorin
e fr
ee p
aper
from
sus
tain
able
res
ourc
es.
Technical datasheetsMetal catalogue
A large selection of brochures...
DncwUltra Microperforation - no infill (2258) = 18 dBStandard Perforated Rg 2516 with fleece (2437) = 20 dBMicroperforated Rd 1522 with fleece (2437) = 20 dBMicroperforated Rd 1522 with Premium OP19 (6719) = 27 dBStandard Perforated Rg 2516 with Premium OP19 (6719) = 28 dBExtra Microperforated Rg 0701 with fleece (2432) = 30 dBExtra Microperforated Rg 0701 with Premium OP19 (6720) = 31 dBExtra Microperforated Rg 0701 with B15 (2427) = 40 dBStandard Perforated Rg 2516 with B15 (2443) = 41 dBMicroperforated Rd 1522 with B15 (2443) = 41 dBPlain - no infill (2438) = 44 dBPlain with B15 (2439) = 47 dB
RwMicroperforation without fleece (5938) = 5 Rw
Standard perforation without fleece* (5938) = 5 Rw
Microperforation with fleece (5939) = 6 Rw
Standard perforation with fleece* (5939) = 6 Rw
Microperforation with Premium OP19 (6724) = 12 Rw
Standard Perforation with Premium OP19 (6726) = 13 Rw
Extra Microperforation with Premium OP19 (6725) = 15 Rw
Microperforation with B15 (5941) = 18 Rw
Standard perforation with B15* (5941) = 18 Rw
Plain - no infill (5936) = 19 Rw
Plain with B15 (5937) = 21 Rw
aw Class NRC 125 250 500 1000 2000 4000 Hz Plain - no infill (2206) 0.10(L) - 0.10 0.25 0.15 0.10 0.10 0.10 0.10 aP
Ultra Microperforation - no infill (2258) 0.40(LM) D 0.55 0.33 0.65 0.70 0.41 0.36 0.26 aP
Extra Microperforated Rg 0701 with fleece (2253) 0.55(L) D 0.65 0.45 0.75 0.70 0.55 0.55 0.45 aP
Microperforated Rd 1522 with B15 (2337) 0.60(H) C 0.60 0.40 0.40 0.50 0.65 0.75 0.90 aP
Perforated Rg 2516 with B15 (2340) 0.60(H) C 0.60 0.40 0.45 0.50 0.65 0.75 0.90 aP
Extra Microperforated Rg 0701 with B15 (2334) 0.65 C 0.60 0.40 0.45 0.55 0.70 0.80 0.70 aP
Extra Microperforated Rg 0701 with Premium OP19 (6714) 0.70 C 0.75 0.40 0.70 0.78 0.78 0.72 0.46 aP
Perforated Rg 2516 with fleece (L/2463) 0.75 C 0.70 0.40 0.75 0.65 0.65 0.75 0.75 aP
Microperforated Rd 1522 with fleece (2175) 0.75 C 0.80 0.30 0.75 0.90 0.65 0.75 0.80 aP
Perforated Rg 2516 with Premium OP19 (6715) 0.95 A 0.90 0.48 0.76 0.93 0.86 1.04 0.95 aP
Microperforated Rd 1522 with Premium OP19 (6713) 1.00 A 0.90 0.46 0.78 0.94 0.89 1.06 1.08 aP
EN ISO 354 & EN ISO 11654
EN 20140-9 & EN 717-1
EN ISO 140-3 & EN ISO 717-1
Acoustical performance
* Estimated1) All Sound Reduction Index (SRI) tests have been conducted in an
independent third party quality assured laboratory in accordance with EN ISO 140-3 with the ceiling suspended horizontally between two vertical transmission suites.
2) Rw values are determined in accordance with EN ISO 717-1. 3) Values for Standard Perforated (16% open area) are estimated as being
not less than Microperforated (22% open area).
System Integration Axal
Vector MicroLook 8 MicroLook 16
Tegular 2
Tegular 8 Tegular 11 F Tegular
16 Board Q-Clip / Q-Clip F
R-Clip / R-Clip F S-Clip F T-Clip F R-H 200 R-H 215 Board Mesh MicroLook 8
MeshTegular 8
MeshTegular 14
Mesh
DESIGN GRID SILHouETTE 15 ✔
DESIGN GRID INTERLuDE 15 ✔
PRELuDE 15 XL2 / TL ✔ ✔ ✔
PRELuDE 24 XL² ✔ ✔ ✔ ✔ ✔ ✔ ✔
PRELuDE 24 TLX ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
SYSTEM 3000 with SPRING A-BAR ✔ ✔ ✔
SYSTEM 3000 with J-BAR ✔
SYSTEM 3000 with H-PRoFILE 35 ✔
C-CHANNEL with SPRING T ✔
Latest information available on www.armstrong-ceilings.co.ukwww.armstrong-ceilings.ie
Octave Band Centre Frequency (Hz)
EN ISO 14021
≤ 30%
CEILING&waLL
Between us, ideas become real i ty ®
SYSTEMS
mmetalceilings& walls
AXAL VECTOR Lay-in solution with square tiles Square edged 6 mm reveal detail, semi-concealed system
Grid Prelude 24 XL2
Modules 500 x 500 mm 600 x 600 mm 675 x 675 mm 750 x 750 mm Additional rectangular module available 300 x 600 mm
BOARD Lay-in solution with square tiles Square edged
Grid Prelude 24 tLX
Modules 600 x 600 mm 625 x 625 mm Additional rectangular module available 600 x 1200 mm
MICROLOOK 8 Lay-in solution with square tiles Square edged, with 8 mm drop
Grid Prelude 15 XL2 / tL Design option Silhouette XL2
Design option interlude XL2
Modules 500 x 500 mm 600 x 600 mm 675 x 675 mm 750 x 750 mm Additional rectangular modules available 600 x 1200 mm 300 x 1200 mm
MICROLOOK 16 Lay-in solution with square tiles Square edged, with 16 mm drop
Grid Prelude 15 XL2 / tL
Modules 500 x 500 mm 600 x 600 mm 675 x 675 mm 750 x 750 mm
Axal Vector
Board
MicroLook 8
MicroLook 16
SQuAre & rectANGuLAr tiLeS - LAY-INBENEFITS■ Diversity of design and application■ easily assembled and fully
demountable■ An easy to install, fl exible system■ cost effective ceiling solution
■ Semi-concealed grid for a monolithic effect
■ Axal Vector provides easy access to the ceiling void (ventilation duct, electrical lines etc.) as it is downwardly demountable
APPLICATION AREAused in a variety of ceiling areas: from small service rooms to large commercial offi ce buildings and major transportation terminals.
SQUARE & RECTANGULAR TILESLay-In - Axal Vector / Board / MicroLook 8 / MicroLook 16
Project: South roof office Block - South terminal - Gatwick Airport (uK) :::::::: oWNer: BAA PLcArchitect: Area 2 Limited :::::::: coNtrActor: South ridge interiors Ltd
SoLutioN: Axal Vector rg 0701 extra Microperforated with Fleece Perforations Page 46
Acoustic performances Pages 47-49
metal ceilings & walls :::: 19
•••••••••••
1.2
1.0
0.8
0.6
0.4
0.2
0
aP
125 250 500 1 000 2 000 4 000
CEILING&waLL
Between us, ideas become real i ty ®
SYSTEMS
Metal system overview
Light reflectance
Pattern RAL 9010 Global White
Plain (unperforated) 85% 75%
Ultra Microperforation 83% 73%
Extra Microperforation Rg 0701 with black acoustic fleece 80% 70%
Standard Perforation Rg 2516 with black acoustic fleece 70% 65%
Microperforation Rd 1522 with black acoustic fleece 65% 60%
Measured in accordance with EN ISO 7742-2 & EN ISO 7742-3.
Recycled ContentRH 95%
Standard perforation patterns
Acoustical infill options
Colour
Ultra MicroperforationRg 0501 Hole diameter: 0.5 mm Open area: 0.64 %
Extra Microperforation Rg 0701Hole diameter: 0.7 mm Open area: 1.5 %
Microperforation Rd 1522Hole diameter: 1.5 mm Open area: 22 %
Standard PerforationRg 2516Hole diameter: 2.5 mm Open area: 16 %
Further perforations are available on request.
Standard colourRAL and NCS are the most widely used colour systems in the construction industry. Armstrong uses RAL 9010 White as its standard colour.
Special coloursArmstrong offer all RAL and NCS colours for your custom solutions.
RAL 901020% gloss
Global White12% gloss
RAL 900630% gloss
RAL 9007 30% gloss
Acoustic FleeceNon-woven acoustic fleece provides a cost effective solution for general sound absorption requirements. As a solution that is bonded to the reverse of the metal tile it helps eliminate pattern staining issues that may occur with loose laid solutions.
Premium B15Premium B15 acoustic solutions have been developed to achieve a wide range of performance values for both sound absorption and sound attenuation. It combines the non-woven acoustic fleece with a 15mm mineral infill board as a factory fitted acoustic solution.
Premium OP19Premium OP19 provides high sound absorption performance utilising specially developed lower density Armstrong mineral infill boards. Premium OP19 infill can achieve up to Class A sound absorption.
Acoustic fleece black, 63 g/m2 Premium OP19Premium B15
Check out our new website and find solutions using the latest selection criteria: Product type shape, dimension, application, acoustic solutions and much more.
The Armstrong standard and configurable metal range:
Linear Grid
Tartan Grid
Vertical Baffles
Open Cell Ceilings
Corridor Ceilings
Island Ceilings
Wall Cladding
■ Hook-On - B-H 300, Lay-In - B-L 302
■ Clip-In - K-Clip, Hook-On - K-H 400
■ Hook-On - V-P 500 / V-K 500
■ Lay-In - Cellio
■ Hook-On - F-H 600, Lay-In - F-L 601, Clip-In - F-Clip Access
■ Clip-In - D-Clip, Hook-On - D-H 700
■ Hook-On - W-H 1000 / W-H 1100
Our website...
www.armstrong-ceilings.co.uk www.armstrong-ceilings.ie
PAS
1205
Arm
stro
ng B
uild
ing
Pro
duc
ts
R.C
.S. B
esan
çon
B 7
84 1
31 5
75
Prin
ted
in E
.C. o
n ch
lorin
e fr
ee p
aper
from
sus
tain
able
res
ourc
es.
Technical datasheetsMetal catalogue
A large selection of brochures...
DncwUltra Microperforation - no infill (2258) = 18 dBStandard Perforated Rg 2516 with fleece (2437) = 20 dBMicroperforated Rd 1522 with fleece (2437) = 20 dBMicroperforated Rd 1522 with Premium OP19 (6719) = 27 dBStandard Perforated Rg 2516 with Premium OP19 (6719) = 28 dBExtra Microperforated Rg 0701 with fleece (2432) = 30 dBExtra Microperforated Rg 0701 with Premium OP19 (6720) = 31 dBExtra Microperforated Rg 0701 with B15 (2427) = 40 dBStandard Perforated Rg 2516 with B15 (2443) = 41 dBMicroperforated Rd 1522 with B15 (2443) = 41 dBPlain - no infill (2438) = 44 dBPlain with B15 (2439) = 47 dB
RwMicroperforation without fleece (5938) = 5 Rw
Standard perforation without fleece* (5938) = 5 Rw
Microperforation with fleece (5939) = 6 Rw
Standard perforation with fleece* (5939) = 6 Rw
Microperforation with Premium OP19 (6724) = 12 Rw
Standard Perforation with Premium OP19 (6726) = 13 Rw
Extra Microperforation with Premium OP19 (6725) = 15 Rw
Microperforation with B15 (5941) = 18 Rw
Standard perforation with B15* (5941) = 18 Rw
Plain - no infill (5936) = 19 Rw
Plain with B15 (5937) = 21 Rw
aw Class NRC 125 250 500 1000 2000 4000 Hz Plain - no infill (2206) 0.10(L) - 0.10 0.25 0.15 0.10 0.10 0.10 0.10 aP
Ultra Microperforation - no infill (2258) 0.40(LM) D 0.55 0.33 0.65 0.70 0.41 0.36 0.26 aP
Extra Microperforated Rg 0701 with fleece (2253) 0.55(L) D 0.65 0.45 0.75 0.70 0.55 0.55 0.45 aP
Microperforated Rd 1522 with B15 (2337) 0.60(H) C 0.60 0.40 0.40 0.50 0.65 0.75 0.90 aP
Perforated Rg 2516 with B15 (2340) 0.60(H) C 0.60 0.40 0.45 0.50 0.65 0.75 0.90 aP
Extra Microperforated Rg 0701 with B15 (2334) 0.65 C 0.60 0.40 0.45 0.55 0.70 0.80 0.70 aP
Extra Microperforated Rg 0701 with Premium OP19 (6714) 0.70 C 0.75 0.40 0.70 0.78 0.78 0.72 0.46 aP
Perforated Rg 2516 with fleece (L/2463) 0.75 C 0.70 0.40 0.75 0.65 0.65 0.75 0.75 aP
Microperforated Rd 1522 with fleece (2175) 0.75 C 0.80 0.30 0.75 0.90 0.65 0.75 0.80 aP
Perforated Rg 2516 with Premium OP19 (6715) 0.95 A 0.90 0.48 0.76 0.93 0.86 1.04 0.95 aP
Microperforated Rd 1522 with Premium OP19 (6713) 1.00 A 0.90 0.46 0.78 0.94 0.89 1.06 1.08 aP
EN ISO 354 & EN ISO 11654
EN 20140-9 & EN 717-1
EN ISO 140-3 & EN ISO 717-1
Acoustical performance
* Estimated1) All Sound Reduction Index (SRI) tests have been conducted in an
independent third party quality assured laboratory in accordance with EN ISO 140-3 with the ceiling suspended horizontally between two vertical transmission suites.
2) Rw values are determined in accordance with EN ISO 717-1. 3) Values for Standard Perforated (16% open area) are estimated as being
not less than Microperforated (22% open area).
System Integration Axal
Vector MicroLook 8 MicroLook 16
Tegular 2
Tegular 8 Tegular 11 F Tegular
16 Board Q-Clip / Q-Clip F
R-Clip / R-Clip F S-Clip F T-Clip F R-H 200 R-H 215 Board Mesh MicroLook 8
MeshTegular 8
MeshTegular 14
Mesh
DESIGN GRID SILHouETTE 15 ✔
DESIGN GRID INTERLuDE 15 ✔
PRELuDE 15 XL2 / TL ✔ ✔ ✔
PRELuDE 24 XL² ✔ ✔ ✔ ✔ ✔ ✔ ✔
PRELuDE 24 TLX ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
SYSTEM 3000 with SPRING A-BAR ✔ ✔ ✔
SYSTEM 3000 with J-BAR ✔
SYSTEM 3000 with H-PRoFILE 35 ✔
C-CHANNEL with SPRING T ✔
Latest information available on www.armstrong-ceilings.co.ukwww.armstrong-ceilings.ie
Octave Band Centre Frequency (Hz)
EN ISO 14021
≤ 30%
Axal Vector
Tegular 2
Board
Q-Clip, R-Clip
Tegular 8
MicroLook 8
T-Clip F
Tegular 11 F
MicroLook 16
Q-Clip F, S-Clip F, R-Clip F
Tegular 16
R-H 200, R-H 215, Q-H 100 F, Q-H 120 F
Sta
ndar
d R
ange
System 3000 with spring A-barType Q-Clip or Q-Clip F window Optional swing-down function window
System 3000 with spring A-barOptional swing-down function window
System 3000 with spring A-barwith swing-down function
C-channel with spring T
R-H 200System 3000 with J-barWith 3 mm black gasket on one short and one long side
R-H 215System 3000 with H-profile 35With 3 mm black gasket on one short and one long side
Clip
-In
Con
ceal
ed G
ridH
ook-
On
Con
ceal
ed G
rid
Q-Clip R-Clip S-Clip F
T-Clip F
Q-ClipClip-In solution with square tiles, Square edged variant600 x 600
R-ClipClip-In solution with rectangular panels, Square edged variant400 x 1500 400 x 2000 400 x 2500
Clip-In solution with square and rectangular tiles, Bevel edged (3 x 3 mm)600 x 600300 x 900300 x 1200300 x 1500
Clip-In solution with square tiles, Bevel edged (5 x 5 mm), Square edged optional500 x 500 300 x 1200300 x 600 600 x 1200600 x 600 300 x 1500 750 x 750
Q-Clip FClip-In solution with square tiles, Bevel edged variant (3 x 3 mm)500 x 500 300 x 600* 600 x 600
* Half size module without Window function
R-Clip FClip-In solution with rectangular panels, Bevel edged variant (3 x 3 mm)300 x 1200600 x 1200400 x 1800
Window function Window function
Hook-On solution with rectangular panels, Square edged400 x 1800 400 x 2700400 x 2100 400 x 3000400 x 2400
Hook-On solution with rectangular panels, Square edged400 x 1800 400 x 2700400 x 2100 400 x 3000400 x 2400
Accessory kit with cables Accessory kit with cables Accessory kit with cables
Metal Canopy flat Metal Canopy concave Metal Canopy convex
Direct suspended 1180 x 1890
Direct suspended 1181 x 1890
radius 2742 mm (inside)
Direct suspended 1181 x 1890
radius 2742 mm (inside)
Prelude 15 XL2 / TLDesign option Silhouette XL2, Interlude XL2
Prelude 15 XL2 / TL
MicroLook 8
MicroLook 16
Lay-In solution with square and rectangular tiles, Square edged, with 8 mm drop500 x 500 300 x 1200600 x 600 600 x 1200750 x 750
Lay-In solution with square tiles, Square edged, with 16 mm drop500 x 500600 x 600 750 x 750
Prelude 24 XL2 - Square edged 6 mm reveal detail, semi-concealed system
Prelude 24 TLX
Prelude 24 XL2 / TLX
Axal Vector
Tegular 2
Tegular 11 F
Lay-In solution with square tiles500 x 500 300 x 600 600 x 600750 x 750
Lay-In solution with square tiles, Square edged, with 2.5 mm drop600 x 600
Lay-In solution with square and rectangular tiles, Bevel edged (3 x 3 mm), with 11 mm drop600 x 600600 x 1200
Prelude 24 TLX
Prelude 24 XL² / TLX
Prelude 24 XL2 / TLX
Board
Tegular 8
Tegular 16
Lay-In solution with square and rectangular tiles, Square edged600 x 600600 x 1200
Lay-In solution with square and rectangular tiles, Square edged, with 8 mm drop500 x 500 600 x 600300 x 1200600 x 1200
Lay-In solution with square tiles, Square edged, with 16 mm drop500 x 500600 x 600750 x 750
Lay-
InVi
sibl
e G
ridIs
land
Cei
ling
PROjECT: Malcolm Pirnie Inc. (US)SOLUTION: Mesh Metal
PROjECT: Leman Cake Decorations (B) SOLUTION: Lay-In Tegular 8 Perforated Rg 2516
PROjECT: DSV Venlo (NL) SOLUTION: S-Clip F Rd 1522 Microperforated RAL 9010
with fleece
PROjECT: Element Office Building (AU) SOLUTION: R-Clip Microperforated Rd 1522
PROjECT: Rathaus St. Gallen (CH) SOLUTION: R-H 200 Microperforated Rd 1522
Axal Vector
Tegular 2
Board
Q-Clip, R-Clip
Tegular 8
MicroLook 8
T-Clip F
Tegular 11 F
MicroLook 16
Q-Clip F, S-Clip F, R-Clip F
Tegular 16
R-H 200, R-H 215, Q-H 100 F, Q-H 120 F
Sta
ndar
d R
ange
System 3000 with spring A-barType Q-Clip or Q-Clip F window Optional swing-down function window
System 3000 with spring A-barOptional swing-down function window
System 3000 with spring A-barwith swing-down function
C-channel with spring T
R-H 200System 3000 with J-barWith 3 mm black gasket on one short and one long side
R-H 215System 3000 with H-profile 35With 3 mm black gasket on one short and one long side
Clip
-In
Con
ceal
ed G
ridH
ook-
On
Con
ceal
ed G
ridQ-Clip R-Clip S-Clip F
T-Clip F
Q-ClipClip-In solution with square tiles, Square edged variant600 x 600
R-ClipClip-In solution with rectangular panels, Square edged variant400 x 1500 400 x 2000 400 x 2500
Clip-In solution with square and rectangular tiles, Bevel edged (3 x 3 mm)600 x 600300 x 900300 x 1200300 x 1500
Clip-In solution with square tiles, Bevel edged (5 x 5 mm), Square edged optional500 x 500 300 x 1200300 x 600 600 x 1200600 x 600 300 x 1500 750 x 750
Q-Clip FClip-In solution with square tiles, Bevel edged variant (3 x 3 mm)500 x 500 300 x 600* 600 x 600
* Half size module without Window function
R-Clip FClip-In solution with rectangular panels, Bevel edged variant (3 x 3 mm)300 x 1200600 x 1200400 x 1800
Window function Window function
Hook-On solution with rectangular panels, Square edged400 x 1800 400 x 2700400 x 2100 400 x 3000400 x 2400
Hook-On solution with rectangular panels, Square edged400 x 1800 400 x 2700400 x 2100 400 x 3000400 x 2400
Accessory kit with cables Accessory kit with cables Accessory kit with cables
Metal Canopy flat Metal Canopy concave Metal Canopy convex
Direct suspended 1180 x 1890
Direct suspended 1181 x 1890
radius 2742 mm (inside)
Direct suspended 1181 x 1890
radius 2742 mm (inside)
Prelude 15 XL2 / TLDesign option Silhouette XL2, Interlude XL2
Prelude 15 XL2 / TL
MicroLook 8
MicroLook 16
Lay-In solution with square and rectangular tiles, Square edged, with 8 mm drop500 x 500 300 x 1200600 x 600 600 x 1200750 x 750
Lay-In solution with square tiles, Square edged, with 16 mm drop500 x 500600 x 600 750 x 750
Prelude 24 XL2 - Square edged 6 mm reveal detail, semi-concealed system
Prelude 24 TLX
Prelude 24 XL2 / TLX
Axal Vector
Tegular 2
Tegular 11 F
Lay-In solution with square tiles500 x 500 300 x 600 600 x 600750 x 750
Lay-In solution with square tiles, Square edged, with 2.5 mm drop600 x 600
Lay-In solution with square and rectangular tiles, Bevel edged (3 x 3 mm), with 11 mm drop600 x 600600 x 1200
Prelude 24 TLX
Prelude 24 XL² / TLX
Prelude 24 XL2 / TLX
Board
Tegular 8
Tegular 16
Lay-In solution with square and rectangular tiles, Square edged600 x 600600 x 1200
Lay-In solution with square and rectangular tiles, Square edged, with 8 mm drop500 x 500 600 x 600300 x 1200600 x 1200
Lay-In solution with square tiles, Square edged, with 16 mm drop500 x 500600 x 600750 x 750
Lay-
InVi
sibl
e G
ridIs
land
Cei
ling
PROjECT: Malcolm Pirnie Inc. (US)SOLUTION: Mesh Metal
PROjECT: Leman Cake Decorations (B) SOLUTION: Lay-In Tegular 8 Perforated Rg 2516
PROjECT: DSV Venlo (NL) SOLUTION: S-Clip F Rd 1522 Microperforated RAL 9010
with fleece
PROjECT: Element Office Building (AU) SOLUTION: R-Clip Microperforated Rd 1522
PROjECT: Rathaus St. Gallen (CH) SOLUTION: R-H 200 Microperforated Rd 1522
Axal Vector
Tegular 2
Board
Q-Clip, R-Clip
Tegular 8
MicroLook 8
T-Clip F
Tegular 11 F
MicroLook 16
Q-Clip F, S-Clip F, R-Clip F
Tegular 16
R-H 200, R-H 215, Q-H 100 F, Q-H 120 F
Sta
ndar
d R
ange
System 3000 with spring A-barType Q-Clip or Q-Clip F window Optional swing-down function window
System 3000 with spring A-barOptional swing-down function window
System 3000 with spring A-barwith swing-down function
C-channel with spring T
R-H 200System 3000 with J-barWith 3 mm black gasket on one short and one long side
R-H 215System 3000 with H-profile 35With 3 mm black gasket on one short and one long side
Clip
-In
Con
ceal
ed G
ridH
ook-
On
Con
ceal
ed G
rid
Q-Clip R-Clip S-Clip F
T-Clip F
Q-ClipClip-In solution with square tiles, Square edged variant600 x 600
R-ClipClip-In solution with rectangular panels, Square edged variant400 x 1500 400 x 2000 400 x 2500
Clip-In solution with square and rectangular tiles, Bevel edged (3 x 3 mm)600 x 600300 x 900300 x 1200300 x 1500
Clip-In solution with square tiles, Bevel edged (5 x 5 mm), Square edged optional500 x 500 300 x 1200300 x 600 600 x 1200600 x 600 300 x 1500 750 x 750
Q-Clip FClip-In solution with square tiles, Bevel edged variant (3 x 3 mm)500 x 500 300 x 600* 600 x 600
* Half size module without Window function
R-Clip FClip-In solution with rectangular panels, Bevel edged variant (3 x 3 mm)300 x 1200600 x 1200400 x 1800
Window function Window function
Hook-On solution with rectangular panels, Square edged400 x 1800 400 x 2700400 x 2100 400 x 3000400 x 2400
Hook-On solution with rectangular panels, Square edged400 x 1800 400 x 2700400 x 2100 400 x 3000400 x 2400
Accessory kit with cables Accessory kit with cables Accessory kit with cables
Metal Canopy flat Metal Canopy concave Metal Canopy convex
Direct suspended 1180 x 1890
Direct suspended 1181 x 1890
radius 2742 mm (inside)
Direct suspended 1181 x 1890
radius 2742 mm (inside)
Prelude 15 XL2 / TLDesign option Silhouette XL2, Interlude XL2
Prelude 15 XL2 / TL
MicroLook 8
MicroLook 16
Lay-In solution with square and rectangular tiles, Square edged, with 8 mm drop500 x 500 300 x 1200600 x 600 600 x 1200750 x 750
Lay-In solution with square tiles, Square edged, with 16 mm drop500 x 500600 x 600 750 x 750
Prelude 24 XL2 - Square edged 6 mm reveal detail, semi-concealed system
Prelude 24 TLX
Prelude 24 XL2 / TLX
Axal Vector
Tegular 2
Tegular 11 F
Lay-In solution with square tiles500 x 500 300 x 600 600 x 600750 x 750
Lay-In solution with square tiles, Square edged, with 2.5 mm drop600 x 600
Lay-In solution with square and rectangular tiles, Bevel edged (3 x 3 mm), with 11 mm drop600 x 600600 x 1200
Prelude 24 TLX
Prelude 24 XL² / TLX
Prelude 24 XL2 / TLX
Board
Tegular 8
Tegular 16
Lay-In solution with square and rectangular tiles, Square edged600 x 600600 x 1200
Lay-In solution with square and rectangular tiles, Square edged, with 8 mm drop500 x 500 600 x 600300 x 1200600 x 1200
Lay-In solution with square tiles, Square edged, with 16 mm drop500 x 500600 x 600750 x 750
Lay-
InVi
sibl
e G
ridIs
land
Cei
ling
PROjECT: Malcolm Pirnie Inc. (US)SOLUTION: Mesh Metal
PROjECT: Leman Cake Decorations (B) SOLUTION: Lay-In Tegular 8 Perforated Rg 2516
PROjECT: DSV Venlo (NL) SOLUTION: S-Clip F Rd 1522 Microperforated RAL 9010
with fleece
PROjECT: Element Office Building (AU) SOLUTION: R-Clip Microperforated Rd 1522
PROjECT: Rathaus St. Gallen (CH) SOLUTION: R-H 200 Microperforated Rd 1522
Axal Vector
Tegular 2
Board
Q-Clip, R-Clip
Tegular 8
MicroLook 8
T-Clip F
Tegular 11 F
MicroLook 16
Q-Clip F, S-Clip F, R-Clip F
Tegular 16
R-H 200, R-H 215, Q-H 100 F, Q-H 120 F
Sta
ndar
d R
ange
System 3000 with spring A-barType Q-Clip or Q-Clip F window Optional swing-down function window
System 3000 with spring A-barOptional swing-down function window
System 3000 with spring A-barwith swing-down function
C-channel with spring T
R-H 200System 3000 with J-barWith 3 mm black gasket on one short and one long side
R-H 215System 3000 with H-profile 35With 3 mm black gasket on one short and one long side
Clip
-In
Con
ceal
ed G
ridH
ook-
On
Con
ceal
ed G
rid
Q-Clip R-Clip S-Clip F
T-Clip F
Q-ClipClip-In solution with square tiles, Square edged variant600 x 600
R-ClipClip-In solution with rectangular panels, Square edged variant400 x 1500 400 x 2000 400 x 2500
Clip-In solution with square and rectangular tiles, Bevel edged (3 x 3 mm)600 x 600300 x 900300 x 1200300 x 1500
Clip-In solution with square tiles, Bevel edged (5 x 5 mm), Square edged optional500 x 500 300 x 1200300 x 600 600 x 1200600 x 600 300 x 1500 750 x 750
Q-Clip FClip-In solution with square tiles, Bevel edged variant (3 x 3 mm)500 x 500 300 x 600* 600 x 600
* Half size module without Window function
R-Clip FClip-In solution with rectangular panels, Bevel edged variant (3 x 3 mm)300 x 1200600 x 1200400 x 1800
Window function Window function
Hook-On solution with rectangular panels, Square edged400 x 1800 400 x 2700400 x 2100 400 x 3000400 x 2400
Hook-On solution with rectangular panels, Square edged400 x 1800 400 x 2700400 x 2100 400 x 3000400 x 2400
Accessory kit with cables Accessory kit with cables Accessory kit with cables
Metal Canopy flat Metal Canopy concave Metal Canopy convex
Direct suspended 1180 x 1890
Direct suspended 1181 x 1890
radius 2742 mm (inside)
Direct suspended 1181 x 1890
radius 2742 mm (inside)
Prelude 15 XL2 / TLDesign option Silhouette XL2, Interlude XL2
Prelude 15 XL2 / TL
MicroLook 8
MicroLook 16
Lay-In solution with square and rectangular tiles, Square edged, with 8 mm drop500 x 500 300 x 1200600 x 600 600 x 1200750 x 750
Lay-In solution with square tiles, Square edged, with 16 mm drop500 x 500600 x 600 750 x 750
Prelude 24 XL2 - Square edged 6 mm reveal detail, semi-concealed system
Prelude 24 TLX
Prelude 24 XL2 / TLX
Axal Vector
Tegular 2
Tegular 11 F
Lay-In solution with square tiles500 x 500 300 x 600 600 x 600750 x 750
Lay-In solution with square tiles, Square edged, with 2.5 mm drop600 x 600
Lay-In solution with square and rectangular tiles, Bevel edged (3 x 3 mm), with 11 mm drop600 x 600600 x 1200
Prelude 24 TLX
Prelude 24 XL² / TLX
Prelude 24 XL2 / TLX
Board
Tegular 8
Tegular 16
Lay-In solution with square and rectangular tiles, Square edged600 x 600600 x 1200
Lay-In solution with square and rectangular tiles, Square edged, with 8 mm drop500 x 500 600 x 600300 x 1200600 x 1200
Lay-In solution with square tiles, Square edged, with 16 mm drop500 x 500600 x 600750 x 750
Lay-
InVi
sibl
e G
ridIs
land
Cei
ling
PROjECT: Malcolm Pirnie Inc. (US)SOLUTION: Mesh Metal
PROjECT: Leman Cake Decorations (B) SOLUTION: Lay-In Tegular 8 Perforated Rg 2516
PROjECT: DSV Venlo (NL) SOLUTION: S-Clip F Rd 1522 Microperforated RAL 9010
with fleece
PROjECT: Element Office Building (AU) SOLUTION: R-Clip Microperforated Rd 1522
PROjECT: Rathaus St. Gallen (CH) SOLUTION: R-H 200 Microperforated Rd 1522
CEILING&waLL
Between us, ideas become real i ty ®
SYSTEMS
mmetalceilings& walls
AXAL VECTOR Lay-in solution with square tiles Square edged 6 mm reveal detail, semi-concealed system
Grid Prelude 24 XL2
Modules 500 x 500 mm 600 x 600 mm 675 x 675 mm 750 x 750 mm Additional rectangular module available 300 x 600 mm
BOARD Lay-in solution with square tiles Square edged
Grid Prelude 24 tLX
Modules 600 x 600 mm 625 x 625 mm Additional rectangular module available 600 x 1200 mm
MICROLOOK 8 Lay-in solution with square tiles Square edged, with 8 mm drop
Grid Prelude 15 XL2 / tL Design option Silhouette XL2
Design option interlude XL2
Modules 500 x 500 mm 600 x 600 mm 675 x 675 mm 750 x 750 mm Additional rectangular modules available 600 x 1200 mm 300 x 1200 mm
MICROLOOK 16 Lay-in solution with square tiles Square edged, with 16 mm drop
Grid Prelude 15 XL2 / tL
Modules 500 x 500 mm 600 x 600 mm 675 x 675 mm 750 x 750 mm
Axal Vector
Board
MicroLook 8
MicroLook 16
SQuAre & rectANGuLAr tiLeS - LAY-INBENEFITS■ Diversity of design and application■ easily assembled and fully
demountable■ An easy to install, fl exible system■ cost effective ceiling solution
■ Semi-concealed grid for a monolithic effect
■ Axal Vector provides easy access to the ceiling void (ventilation duct, electrical lines etc.) as it is downwardly demountable
APPLICATION AREAused in a variety of ceiling areas: from small service rooms to large commercial offi ce buildings and major transportation terminals.
SQUARE & RECTANGULAR TILESLay-In - Axal Vector / Board / MicroLook 8 / MicroLook 16
Project: South roof office Block - South terminal - Gatwick Airport (uK) :::::::: oWNer: BAA PLcArchitect: Area 2 Limited :::::::: coNtrActor: South ridge interiors Ltd
SoLutioN: Axal Vector rg 0701 extra Microperforated with Fleece Perforations Page 46
Acoustic performances Pages 47-49
metal ceilings & walls :::: 19
•••••••••••
1.2
1.0
0.8
0.6
0.4
0.2
0
aP
125 250 500 1 000 2 000 4 000
CEILING&waLL
Between us, ideas become real i ty ®
SYSTEMS
Metal system overview
Light reflectance
Pattern RAL 9010 Global White
Plain (unperforated) 85% 75%
Ultra Microperforation 83% 73%
Extra Microperforation Rg 0701 with black acoustic fleece 80% 70%
Standard Perforation Rg 2516 with black acoustic fleece 70% 65%
Microperforation Rd 1522 with black acoustic fleece 65% 60%
Measured in accordance with EN ISO 7742-2 & EN ISO 7742-3.
Recycled ContentRH 95%
Standard perforation patterns
Acoustical infill options
Colour
Ultra MicroperforationRg 0501 Hole diameter: 0.5 mm Open area: 0.64 %
Extra Microperforation Rg 0701Hole diameter: 0.7 mm Open area: 1.5 %
Microperforation Rd 1522Hole diameter: 1.5 mm Open area: 22 %
Standard PerforationRg 2516Hole diameter: 2.5 mm Open area: 16 %
Further perforations are available on request.
Standard colourRAL and NCS are the most widely used colour systems in the construction industry. Armstrong uses RAL 9010 White as its standard colour.
Special coloursArmstrong offer all RAL and NCS colours for your custom solutions.
RAL 901020% gloss
Global White12% gloss
RAL 900630% gloss
RAL 9007 30% gloss
Acoustic FleeceNon-woven acoustic fleece provides a cost effective solution for general sound absorption requirements. As a solution that is bonded to the reverse of the metal tile it helps eliminate pattern staining issues that may occur with loose laid solutions.
Premium B15Premium B15 acoustic solutions have been developed to achieve a wide range of performance values for both sound absorption and sound attenuation. It combines the non-woven acoustic fleece with a 15mm mineral infill board as a factory fitted acoustic solution.
Premium OP19Premium OP19 provides high sound absorption performance utilising specially developed lower density Armstrong mineral infill boards. Premium OP19 infill can achieve up to Class A sound absorption.
Acoustic fleece black, 63 g/m2 Premium OP19Premium B15
Check out our new website and find solutions using the latest selection criteria: Product type shape, dimension, application, acoustic solutions and much more.
The Armstrong standard and configurable metal range:
Linear Grid
Tartan Grid
Vertical Baffles
Open Cell Ceilings
Corridor Ceilings
Island Ceilings
Wall Cladding
■ Hook-On - B-H 300, Lay-In - B-L 302
■ Clip-In - K-Clip, Hook-On - K-H 400
■ Hook-On - V-P 500 / V-K 500
■ Lay-In - Cellio
■ Hook-On - F-H 600, Lay-In - F-L 601, Clip-In - F-Clip Access
■ Clip-In - D-Clip, Hook-On - D-H 700
■ Hook-On - W-H 1000 / W-H 1100
Our website...
www.armstrong-ceilings.co.uk www.armstrong-ceilings.ie
PAS
1205
Arm
stro
ng B
uild
ing
Pro
duc
ts
R.C
.S. B
esan
çon
B 7
84 1
31 5
75
Prin
ted
in E
.C. o
n ch
lorin
e fr
ee p
aper
from
sus
tain
able
res
ourc
es.
Technical datasheetsMetal catalogue
A large selection of brochures...
DncwUltra Microperforation - no infill (2258) = 18 dBStandard Perforated Rg 2516 with fleece (2437) = 20 dBMicroperforated Rd 1522 with fleece (2437) = 20 dBMicroperforated Rd 1522 with Premium OP19 (6719) = 27 dBStandard Perforated Rg 2516 with Premium OP19 (6719) = 28 dBExtra Microperforated Rg 0701 with fleece (2432) = 30 dBExtra Microperforated Rg 0701 with Premium OP19 (6720) = 31 dBExtra Microperforated Rg 0701 with B15 (2427) = 40 dBStandard Perforated Rg 2516 with B15 (2443) = 41 dBMicroperforated Rd 1522 with B15 (2443) = 41 dBPlain - no infill (2438) = 44 dBPlain with B15 (2439) = 47 dB
RwMicroperforation without fleece (5938) = 5 Rw
Standard perforation without fleece* (5938) = 5 Rw
Microperforation with fleece (5939) = 6 Rw
Standard perforation with fleece* (5939) = 6 Rw
Microperforation with Premium OP19 (6724) = 12 Rw
Standard Perforation with Premium OP19 (6726) = 13 Rw
Extra Microperforation with Premium OP19 (6725) = 15 Rw
Microperforation with B15 (5941) = 18 Rw
Standard perforation with B15* (5941) = 18 Rw
Plain - no infill (5936) = 19 Rw
Plain with B15 (5937) = 21 Rw
aw Class NRC 125 250 500 1000 2000 4000 Hz Plain - no infill (2206) 0.10(L) - 0.10 0.25 0.15 0.10 0.10 0.10 0.10 aP
Ultra Microperforation - no infill (2258) 0.40(LM) D 0.55 0.33 0.65 0.70 0.41 0.36 0.26 aP
Extra Microperforated Rg 0701 with fleece (2253) 0.55(L) D 0.65 0.45 0.75 0.70 0.55 0.55 0.45 aP
Microperforated Rd 1522 with B15 (2337) 0.60(H) C 0.60 0.40 0.40 0.50 0.65 0.75 0.90 aP
Perforated Rg 2516 with B15 (2340) 0.60(H) C 0.60 0.40 0.45 0.50 0.65 0.75 0.90 aP
Extra Microperforated Rg 0701 with B15 (2334) 0.65 C 0.60 0.40 0.45 0.55 0.70 0.80 0.70 aP
Extra Microperforated Rg 0701 with Premium OP19 (6714) 0.70 C 0.75 0.40 0.70 0.78 0.78 0.72 0.46 aP
Perforated Rg 2516 with fleece (L/2463) 0.75 C 0.70 0.40 0.75 0.65 0.65 0.75 0.75 aP
Microperforated Rd 1522 with fleece (2175) 0.75 C 0.80 0.30 0.75 0.90 0.65 0.75 0.80 aP
Perforated Rg 2516 with Premium OP19 (6715) 0.95 A 0.90 0.48 0.76 0.93 0.86 1.04 0.95 aP
Microperforated Rd 1522 with Premium OP19 (6713) 1.00 A 0.90 0.46 0.78 0.94 0.89 1.06 1.08 aP
EN ISO 354 & EN ISO 11654
EN 20140-9 & EN 717-1
EN ISO 140-3 & EN ISO 717-1
Acoustical performance
* Estimated1) All Sound Reduction Index (SRI) tests have been conducted in an
independent third party quality assured laboratory in accordance with EN ISO 140-3 with the ceiling suspended horizontally between two vertical transmission suites.
2) Rw values are determined in accordance with EN ISO 717-1. 3) Values for Standard Perforated (16% open area) are estimated as being
not less than Microperforated (22% open area).
System Integration Axal
Vector MicroLook 8 MicroLook 16
Tegular 2
Tegular 8 Tegular 11 F Tegular
16 Board Q-Clip / Q-Clip F
R-Clip / R-Clip F S-Clip F T-Clip F R-H 200 R-H 215 Board Mesh MicroLook 8
MeshTegular 8
MeshTegular 14
Mesh
DESIGN GRID SILHouETTE 15 ✔
DESIGN GRID INTERLuDE 15 ✔
PRELuDE 15 XL2 / TL ✔ ✔ ✔
PRELuDE 24 XL² ✔ ✔ ✔ ✔ ✔ ✔ ✔
PRELuDE 24 TLX ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
SYSTEM 3000 with SPRING A-BAR ✔ ✔ ✔
SYSTEM 3000 with J-BAR ✔
SYSTEM 3000 with H-PRoFILE 35 ✔
C-CHANNEL with SPRING T ✔
Latest information available on www.armstrong-ceilings.co.ukwww.armstrong-ceilings.ie
Octave Band Centre Frequency (Hz)
EN ISO 14021
≤ 30%