metal products contour series ... - taylor metal...taylor metal products, inc. delivers using diesel...
TRANSCRIPT
Contour Series™Installation Guide
TAYLORM E T A L P R O D U C T S
�YLOR METAL PRODUCTS
Contour Series
Table of Contents
NOTES TO DESIGNER/INSTALLER ............................................................ pg. 3-4
DELIVERY .................................................................................................... pg. 5
16" PROFILES ............................................................................................. pg. 6
12" PROFILES............................................................................................. pg. 7
LAP WITH SPLICE PLATES ......................................................................... pg. 8
LAP WITH REVEALS ................................................................................... pg. 9
BASE FLASHING ......................................................................................... pg. 10
WALL TERMINATION ................................................................................ pg. 11
OUTSIDE CORNER ..................................................................................... pg. 12
INSIDE CORNER ......................................................................................... pg. 13
HORIZONTAL & VERTICAL REVEAL. ........................................................ pg. 14
DOOR/WINDOW HEAD ............................................................................ pg. 15
DOOR/WINDOW JAMB ........................................................................... pg. 16
Contour Series™ gives you the custom look you want within your budget. If one of our standard profiles does not match your design requirements, no problem, TMP will fabricate the profile that matches your projects needs – not ours. Contact us so we can help fulfill your vision of the perfect look.
Contour panels are available in a wide variety of “Cool” baked on Kynar® colors, Rusteel Plus™ (A606), Copper and .032 Kynar 500® Painted Aluminum.
34"
16" COVERAGE
11116"
114"
S.O. 2414"
34"
1618" COVERAGE
51116"
114"
S.O. 2212"
34"
1618" COVERAGE
11116"
514"
S.O. 2212"
34"
16" COVERAGE
138"
21516"
114"
S.O.24716"
12" COVERAGE
114" OR 11
2"
2"
11516"
114" OR 11
2"
12" COVERAGE
6"
11516"
2"
114" HEIGHT S.O.: 211
2" 112" HEIGHT S.O.: 213
4"
114" OR 11
2"
12" COVERAGE
6"
114" HEIGHT S.O. 191
16" 112" HEIGHT S.O. 195
16"
FEATURED PROJECT: C-5 Panel | Oregon State - Cascades | Bend, OR
4 // TAYLOR METAL PRODUCTS
Contour Series™ C-1 to C-8
C-1
C-2
C-3
C-4
C-5
C-6
C-7
C-8
12" COVERAGE
114" OR 11
2"
4"
11516"
114" HEIGHT S.O. 211
2" 112" HEIGHT S.O. 213
4"
Kynar 500
Commercial-grade metal primer
G-90 galvanizing
24 or 26 guage steel
G-90 galvanizing
Commercial-grade metal primer
Corrosion resistant primer
WWW.TAYLORMETAL.COM // 5
SPECIAL KEY FEATURES Contour Series™ C-1 to C-8
2’ to 20’6” panel lengths
3/4”, 1-1/4” and 1-1/2” depths
Clip systems available – flush mount and high performance standoff clip (required for 18-20 gauge)
Air and Water Infiltration Testing ASTM 283, 330 and 331
Custom profiles available
Contour Series™ is available in 20 standard colors, 5 Metallic Colors and 4 Specialized Colors
Kynar 500® Paint System - the ultimate in exterior durability and color retention
“Cool” color pigments are specifically designed to reflect infrared light, reducing heat gain to dwelling, and conform with ENERGY STAR® criteria
Superior quality, two-coat, 70% resin finish, applied at 1mm thickness
40 year residential paint warranty
20 and 30 year commercial paint warranty(Contact TMP for warranty specifications)
Kynar 500® paint layerCommercial-grade metal primerG-90 Galvanized or AZ-50
Base Steel
G-90 Galvanized or AZ-50Commercial-grade metal primerCorrosion resistant wash coat
TAYLORM E T A L P R O D U C T S
�YLOR METAL PRODUCTS
Notes to Designer /Installer
Contour Series
Notes to Designer/Installer
Taylor Commercial Products is providing the following details as an aid in design. The details in this guide are not inclusive to all design situations. The designer /installer is responsible for modifications and should take into consideration all aspects of the project including climate conditions, such as, snow and wind, as well as, building code requirements, building design, building usage and maintenance requirements.
Installation should be performed only by qualified installers familiar with metal siding systems and industry standards. For details not shown in this guide, refer to the Sheet Metal and Air Conditioning Contractors National Association (SMACNA) architectural sheet metal manual for proper design.
The Standard gauge for all products in this guide is 24 gauge and the standard finish is Kynar 500®/Hylar 5000®. We recommend specifying all flashings be the same gauge, color, and finish as the panels to insure long-term durability and color match.
Substrates Details in the manual are all shown over solid substrate. Contour can be used over
spaced purlins no greater than 24" apart.
For solid substrate, Taylor Commercial Products recommends 5/8" plywood.
Underlayments Minimum underlayment requirements are 30 lb. ASTM rated felt, a synthetic underlayment with Class A fire rating and ASTM UV protection technology or a high temperature self-adhering rubberized membrane. When choosing the underlayment, consider the roof slope, roof design, roof panel, and the climate.
Oil Canning Flat metal surfaces will display waviness commonly referred to as "oil canning". Oil canning is caused by a variety of conditions. Steel mill tolerances, variations in or uneven substrates and roofing underlayment's. Oil canning is a characteristic of metal siding, not a defect and is not a cause for rejection.
Thermal Movement The Panels and the flashings must be allowed to expand and contract, especially with longer length panels. The panel may need to have a slight gap where the panel hooks the offset cleat to allow for thermal movement of the panels.
3
�YLOR METAL PRODUCTS
Handling / Storage & Safety
Contour Series
Handling/Storage/Safety
Handle materials with care when off-loading or moving materials to avoid damage to panels or flashings. Long panels may require two or more pick-up points, properly spaced to avoid damaging panels. Plan ahead; contact Taylor Commercial Products for recommendations on handling/hoisting long panels.
Store the panels, flashings and accessories in a dry, well ventilated area, off the ground. If covering, allow ventilation around panels. Elevate one end of bundle to allow drainage of wet materials.
Take care when painting to avoid getting over spray on the siding material. Remember that wind can carry paint particles some distance. Over spray can cause the finish of the roofing material to look dull and may void your warranty.
Secure materials, especially when leaving the site, on the ground or roof to prevent winds from moving the materials. Wind-blown materials may cause damage to the material, property or persons.
Always use proper safety equipment and attire to minimize risk of cuts or other injuries.
Avoid installing metal panels in windy conditions.
Safety considerations are the responsibility of the installer and his crew. Be sure to use common sense and generally accepted safety practices when installing roofing material.
4
Delivery and Will Call
Delivery PolicyTaylor Metal Products, Inc. delivers using diesel trucks with 5th
wheel, low-boy flat bed trailers. Overall combined length can
be as long as 65 feet. Our fleet includes trucks, with and without
knuckle cranes, and a variety of trailer sizes to assist in deliveries.
We will make every effort to accommodate requests for a specific
delivery mechanism but we cannot guarantee availability of
specific resources.
We will make every attempt to deliver material to the desired
location. We may be unable to gain access on tight corners or
steep terrain. If the site is deemed inaccessible by our driver,
the customer may choose an alternate delivery site within a
reasonable proximity. If we are unable to make the delivery,
additional charges may be assessed.
The customer is responsible for:
• Determining adequate access for delivery ahead of time.
• Meeting the delivery at the agreed upon time.
• Any balance owing on C.O.D invoices.
• Providing adequate resources (1-4 people as needed) for off-
loading materials.
• $35 per half hour charge if delivery takes longer than one-
hour.
Delivery times are usually scheduled one day in advance. Taylor
Metal Products will make every effort to make the delivery at the
scheduled time. Please be aware that there may be conditions
beyond our control such as traffic, mechanical failure, road
closures, etc. which may affect our schedule.
Will Call and Loading PoliciesFlat bed trailers and trucks are best suited to transport metal
roofing materials. These can be loaded from the side with a
forklift and tied down in a safe and secure manner.
We are not able to load materials onto vehicles and/or
trailers which are not suitable or may be hazardous to load.
Please be aware that if we find a vehicle to be inappropriate,
we reserve the right to refuse to load your order.
Examples are: boat trailers, vans,
buses, motor homes, campers and box
trailers. Pickup racks which do not have
sufficient supports for the weight or are
not long enough to support bundles
are also unacceptable.
Taylor Metal Products is not responsible to tie down loads
nor do we provide any tie down materials. Please bring
tie downs to secure your load (string or twine are not
acceptable for this purpose.) We do offer a delivery service at
reasonable rates to accommodate the customer who needs
the materials delivered to an accessible job-site.
Please see our delivery pricing pages for more
information.
5
�YLOR METAL PRODUCTS
1: • I 1 1)16
C1 L ' '
I• 5 1Xs
C2 L
1- • I 1 1)16
C3 L ' 1-
16
' ' I•• I � ¼
•I
' ' I•• I � ¼
'
5¼ •I
' '
'
Contour Series
Panels: 16"
·1_l
' t
_l '
t
_l
t
¾
¾
¾
C4
8
2 15
6
�YLOR METAL PRODUCTS
r. --12----1·1�2 --1 -- 2--i
cs L I I I I
I• 6-�• 1�-- 2 .. I .. 2--i
C6 L I I
I• 6---6 •I
C7 L
CB L I I
Contour Series
Panels: 12"
7
�YLOR METAL PRODUCTS
12" backer plates set in 2 beads of-� non-skinning butyl
Contour Series
Panel Lap
8
�YLOR METAL PRODUCTS
"j> I
I
I
• 13.1
C:3::J Double J
�3� T-Trim
Contour Series
Reveal Lap
! 1 � Reveal may varie per projectDouble J with backer design
I
I
I
9
�YLOR METAL PRODUCTS
HORIZONTAL
----- OFF SET CLEAT
------ SCREW 12• OC .--- SIDING PANEL --- BASE FLASHING
VERTICAL
�-- SIDING PANEL --- BASE FLASHING
Contour Series
Base Flashing
4
l____,,, D
4
l____,,,
10
�YLOR METAL PRODUCTS
<I
·4;
<I
. 4;
•LJ
<I
4 .
. .
. .
<I
4. A
4
4
<I
•LJ
<I
4 .
. .
. .
<I
4.
4
<I
A
4
HORIZONTAL
SIDING PANEL
C-CASING
PAN HEAD SCREW
VERTICAL
...__--SIDING PANEL
Contour Series
Wall Termination
3--J
1 i
3
1 i
----C-CASING WITH WATER BACK HEM
----PAN HEAD SCREW
"----NON-SKINNING BUTYL TAPE
'-----NEOPRENE WASHERED SCREW AT EACH LAP
11
�YLOR METAL PRODUCTS
HORIZONTAL
'-----SIDING PANEL
Contour Series
Outside Corner
----C-CASING WITH WATER BACK HEM ---NEOPRENE WASHERED SCREW AT EACH LAP ---OUTSIDE CORNER
VERTICAL
'-----SIDING PANEL CUT TO FIT ----NON-SKINNING BUTYL TAPE
----NEOPRENE WASHERED SCREW AT 12" OC ----PAN HEAD SCREW 12" OC
OUTSIDE CORNER
12
�YLOR METAL PRODUCTS
Contour Series
Inside Corner
HORIZONTAL
LSIDING PANEL ---C-CASING WITH WATER BACK HEM ---NEOPRENE WASHERED SCREW AT EACH LAP ---INSIDE CORNER
VERTICAL
---SIDING PANEL CUT TO FIT ---NON-SKINNING BUTYL TAPE
---NEOPRENE WASHERED SCREW 12• OC
PAN HEAD SCREW 12• OC ---INSIDE CORNER
13
�YLOR METAL PRODUCTS
HORIZONTAL
OFF SET CLEAT
SCREW 12• QC SIDING PANEL BASE FLASHING
VERTICAL
SIDING PANEL
BASE FLASHING
Contour Series
Vertical Reveal
r D4
l 1
H
r 4
l 1 �
14
�YLOR METAL PRODUCTS
HORIZONTAL
----- OFF SET CLEAT
�� Door/Window (other)
�� Door/Window (other)
-----SCREW 12• QC ....---SIDING PANEL ....---BASE FLASHING
.---TRIM
VERTICAL
-------OFF SET CLEAT
----- SCREW 12• QC _..---SIDING PANEL _..---BASE FLASHING ....---TRIM
Contour Series
Door/Window Head
D l._,
15
�YLOR METAL PRODUCTS
HORIZONTAL
l-3
VERTICAL
Contour Series
Door/Window Jamb
1�--
Vories per panel
------NEOPRENE WASHERED SCRW 12• OC -----BUTYL TAPE -----VERTICAL SIDING PANEL
���ASING
�;;����31;.:� ------PAN HEAD SCREW
4
16
�YLOR METAL PRODUCTS
HORIZONTAL
OFF SET CLEAT
SCREW 12• QC SIDING PANEL BASE FLASHING
VERTICAL
SIDING PANEL
BASE FLASHING
Contour Series
HORIZONTAL/VERTICAL
REVEAL
r D4
l 1
H
r 4
l 1 �
17
Custom Trim Order
Customer Name: _______________________________ Job Name: ________________
Please provide a drawing for each flashing with precise measurements and anglesFax to: 503-581-6877
Drawing #:___ Pitch: ______ # of Pieces: ___________
Description:____________________________________
Hems: Open Closed Slightly Open
Drawing #:___ Pitch: ______ # of Pieces: ___________
Description:____________________________________
Hems: Open Closed Slightly Open
Drawing #:___ Pitch: ______ # of Pieces: ___________
Description:____________________________________
Hems: Open Closed Slightly Open
Drawing #:___ Pitch: ______ # of Pieces: ___________
Description:____________________________________
Hems: Open Closed Slightly Open
4566 Ridge Dr NE Salem OR 97301 • Phone: 503-581-8338 or 1-800-574-1388 • www.taylormetal.com
Order Form New Order Add-on Order
Fax to: 503-581-6877
Sold To:
Order Contact:
Job Name:Ship To:
Phone #Fax # Will Call Delivery Date:
Panels with * need Pattern Choice Color:
Soffit*GR7
Ribs Flat Pitch:
Smoothwall*GR5
Striations Gauge
T-3PBR 12-3/4" MS150*
Notched? Y N
Tuff Rib2-1/2" Corrugated 16-5/8" MS150*
Classic 7/8" Corrugated 18" MS200*
*All Kynar, Easy-Lock, Soffit, & Smoothwall, Clip Lock, MS150, Versa Span, MS200 flashings are 10'*All Armor Tech 26 and 29 Gauge. StreamLine, T-3, Tuff Rib, GR7, PBR, Corrugated, & GR5 flashings are 12'6"
Quantity Quantity
Forgetting Anything?Underlayment? Screws? Clips?
Pattern Choices:
14-5/8" Versa Span*
18" Versa Span*
Panel & Flashing Items
Length Item Description Length Item Description
4566 Ridge Dr NE · Salem, OR 97301 · F:503-581-6877 · P503-581-8338 · www.taylormetal.com
Caulking? Closures?
PO# Date:
Inside Sales:
16" Easy-Lock*16" StreamLine*
Shadow Line*HR-34
Marion ‘R’ Panel12" Easy-Lock*
StriationsFlat
Ribs14-5/8"MS200*
Clip Relief? Y N Sealant? Y N Notched? Y NPattern Choices:
RIVERSIDE BRANCH 4880 Felspar St.
Riverside, CA 92509
Office: 323-407-7457Toll Free: 1-877-504-1594
SALEM BRANCH4566 Ridge Drive NE
Salem, OR 97301
Office: 503-581-8338Toll Free: 1-800-574-1388
Fax: 503-581-6877
WOODINVILLE BRANCH5927 234th St. SE
Woodinville, WA 98072
Office: 425-485-3003Toll Free: 1-800-574-1388
Fax: 425-485-2710
AUBURN BRANCH710 A St. NW Suite 101
Auburn, WA. 98001
Office: 206-900-9923Toll Free: 1-800-574-1388
Fax: 253-804-3545
MCCLELLAN BRANCH5711 Perrin Ave
McClellan, CA. 95652
Office: 916-318-8844Toll Free: 1-800-574-1388
Fax: 916-993-4123
TAYLORM E T A L P R O D U C T S
QUALITY PRODUCTSEXCEPTIONAL SERVICE
Contour Series ™ Installation Guide - © 2018 Taylor Metal Products