metal forge induction
TRANSCRIPT
METAL FORGEINDUCTIONINDUCTION
WITH DALLAS
metal forgeThis is the furnace to heat the metal to be manipulated. the
danger elements of this station are the heat, use of fire and gas.
key things to make sure are addressed are the gas flow, air
flow and electrics and extraction of fumes.
twisting the metal
metal forging is a very physical discipline as well as time
sensitive of material. more then just a cliche’ you must hit the iron when it is hot or your
results will be unfavourable.
physics of the process
you will find you will be working in various planes of play. in this
process not only was it necessary to twist the metal but
also pull in a synchronous manner. if the metal did bend in
a manor not intended corrections must be made
quickly.
protective gearthe use of the protective gear is
essential in the metal forging process. even with the
protective gear the heat did transfer through the gloves and
the potential to burning ones skin was a constant risk which
needed to be monitored.
final piece. the induction process was
focused around producing a metal welsh love spoon.
the ladle being the first time working with
forming metal with a hammer there were some mistakes made. one was the distortion of the rim of the ladle. this was to be corrected on the metal grinder at a later time. Induction has
been given to achieve this though.
the shapeI was actually quite chuffed over the final bit. mine was the best.
I believe this was due to not being afraid of hitting the metal with a force that was needed.
final outcome of induction
• This induction has brought a better understanding of the various kinetic elements needed to form metal. the process gave a good insight to what may happen within a kiln by observing the fluidity of the metal when heated. It was hypothesised as being similar to what happens to glazes when heated.
further exploration and uses of metal forging
• in further projects there is a desire to work larger and utilising ceramic as adornment or as embellishments. there will need to be a structure which will also lend an aesthetic quality to the final instilation.
• in a pure utilitarian aspect, it was concidered to combined the metal forging with the ceramic to create a entry gate to a front drive of ones home.