mesh-intro 15.0 agenda

1 © 2013 ANSYS, Inc. March 3, 2014 ANSYS Confidential Agenda Session Lecture/Workshop Time Morning Lecture 1 – Introduction to ANSYS Lecture 2 – Introduction to Workbench Lecture 3 – Introduction to Meshing 08:30 - 09:10 Workshop 3.1 – ANSYS Meshing Basics 09:10 – 9:35 Lecture 4 – Meshing Methods 9:35 – 10:05 Workshop 4.1 – Mesh Methods 10:05 – 10:45 Lecture 5 – Global Mesh Controls 10:45 – 11:15 Workshop 5.1 – Using Global Mesh Controls 11:15 – 12:00 Lunch 12:00 – 12:30 Afternoon Lecture 6 – Local Mesh Controls 12:30 – 13:00 Workshop 6.1 – Using Local Mesh Controls 13:00 – 13:45 Lecture 7 – Introduction to Advanced Topics 13:45– 14:35 Advanced Workshops (Any 2 or 3): 7a-Mixing Tank, 7b-Automotive Aero, 7c- Combustion Chamber (2d), 7d-Assembly Meshing, 7e-Manifold 14:35 – 16:30

Upload: muralidharan-shanmugam

Post on 18-Dec-2015

5 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

DESCRIPTION

Mesh-Intro 15.0 Agenda

TRANSCRIPT

1 2013 ANSYS, Inc. March 3, 2014 ANSYS Confidential

Agenda

Session Lecture/Workshop Time

Morning Lecture 1 Introduction to ANSYS Lecture 2 Introduction to Workbench Lecture 3 Introduction to Meshing

08:30 - 09:10

Workshop 3.1 ANSYS Meshing Basics 09:10 9:35

Lecture 4 Meshing Methods 9:35 10:05

Workshop 4.1 Mesh Methods 10:05 10:45

Lecture 5 Global Mesh Controls 10:45 11:15

Workshop 5.1 Using Global Mesh Controls 11:15 12:00

Lunch 12:00 12:30

Afternoon Lecture 6 Local Mesh Controls 12:30 13:00

Workshop 6.1 Using Local Mesh Controls 13:00 13:45

Lecture 7 Introduction to Advanced Topics 13:45 14:35

Advanced Workshops (Any 2 or 3): 7a-Mixing Tank, 7b-Automotive Aero, 7c-Combustion Chamber (2d), 7d-Assembly Meshing, 7e-Manifold

14:35 16:30