mediadata 2014 - media portal startseite - vogel mediaportal · mediadata 2014 mm_industrial ......
TRANSCRIPT
NEW
SWITZERLAND
AUSTRIA
POLAND
CZECH REPUBLIC
HUNGARY
UKRAINE
TURKEY
CHINA
THAILAND
KOREA
INDIA
Media Data
2014
mm_industrial_englisch_140219.indd 1mm_industrial_englisch_140219.indd 1 19.02.2014 07:56:3119.02.2014 07:56:31
2 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India Switzerland
International MM Issues
SwitzerlandSMM SchweizerMaschinenmarkt(German speaking issue)Page 4-5
SwitzerlandMSM Le Mensuel del´industrie(French speaking issue)Page 6-9
AustriaMM Das österreichischeIndustriemagazinPage 10-11
PolandMMMagazyn PrzemyslowyPage 12-13
TurkeyMMMakina MagazinPage 20-21
HungaryMMMüszaki MagazinPage 16-17
UkraineMMMoney and TechnologiesPage 18-19
Czech RepublicMM Pr°umyslové spektrumPage 14-15
ThailandMM The Industrial MagazinePage 30-31
ChinaMM Xiandai ZhizaoPage 22-29
KoreaMM KoreaPage 32-33
Contact: Winfried Burkard - Sales Manager - MMMaschinenMarkt - Phone: +49 931 418-2686 - [email protected]
IndiaMM IndiaPage 34-35
T k
China K I di
mm_industrial_englisch_140219.indd 2mm_industrial_englisch_140219.indd 2 19.02.2014 07:56:3119.02.2014 07:56:31
2 Switzerland (SMM)
Switzerland (MSM)
SMM/MSM (Online)
Austria Poland Czech Republic
Hungary Ukraine Turkey China Thailand MM Electronics
Korea Indonesia Online
India3 Switzerland (SMM)
Switzerland (MSM)
SMM/MSM (Online)
Austria Poland Czech Republic
Hungary Ukraine Turkey China Thailand MM Electronics
Korea Indonesia Online
India Switzerland (SMM)
Switzerland (MSM)
SMM/MSM (Online)
Austria Poland Czech Republic
Hungary Ukraine Turkey China Thailand MM Electronics
Korea Indonesia Online
India 3
SwitzerlandVogel Business Media AGSeestraße 95CH-8800 ThalwilContact partner: Mrs. Trudi Halama(German, English)Phone: +41 44 722 77 78Fax: +41 44 720 10 [email protected] transmission: [email protected]
Austria Technik & Medien Verlagsges. m.b.H.Hetzendorfer Str. 59/3A-1120 ViennaContact partner: Mrs. Gilda Csokor(German, English)Phone: +43 1 876 8379 14Fax: +43 1 876 8379 15Mobil: +43 676 848 205 [email protected]
Poland Raven Media sp. z o.o.ul. Grabiszynska 163PL-53-439 WroclawContact partner: Mr. Pawel Kruk(Polish, English)Phone: +48 71 78 23 195Fax: +48 71 78 23 [email protected]
Czech Republic MM publishing s.r.o. (Ltd.)Pripotocní 1519/10ACZ-101 00 Praha 10Contact partner: Mrs. Gabriela Jedlickova(Czech, English, German)Phone: +420 222 365 329Fax: +420 267 216 440Mobil: +420 775 245 [email protected]
Hungary MediaCity Magyarország Kft.Kecskeméti utca 5H-1053 BudapestContact partner: Mr. Zsolt Mészároschief editorPhone: +36 06 1 445 3024Fax: +36 1 225 23 [email protected]
Ukraine Soft-Press, P.O. Box 503005 Kiev, UkraineContact partner: Mrs. Ekaterina Ostrovskaya(Russian, English)Phone: +380 44 585 82 82Fax: +380 44 585 82 [email protected]
Turkey „Globus” Dünya Basinevi100. Yil MahallesiTR-34440 Bagcilar - IstanbulContact partner: Mr. Yalcin Gür (Turkish, English)Phone: +90 212 440 2866Fax: +90 212 355 [email protected]
China Beijing Jigong Vogel Media Advertising Co., Ltd.No. 1, Bai Yun Road 11 F, Xicheng District Beijing, Beijing-100045, PR CHINAContact partner: Ms. Christina KaiserPhone: +86 10 6332 6090Fax: +86 10 6332 6099Mobile: +86 138 1111 [email protected]
Thailand Green World Media (Thailand) Co. Ltd.244, Ladprao 107, Klongchan Bangkapi Bangkok 10240, ThailandContact partner: Mr. Sumate Kittitheerapornchai(English)Phone: +66 2 731 1191Fax: +66 2 769 [email protected]
Korea MM Korea CO., LTD.#1704, Byucksan Digital Valley 8 Cha, 9 Mullae-dong 5-ga, Yeongdeungpo-gu, Seoul, 150-095, KoreaContact partner: Miss. Min Jung KIM(English, German, Korean)Phone: +82 2 2052 3551 (5 lines)Fax: +82 2 2052 [email protected], [email protected], [email protected]
The printing material will be handled directly by our publishing partners abroad.Please send your printing material to the following addresses (if possible in the respective foreign language):
We can also translate your advertisement into the respective foreign language. We therefore charge our cost price. Please send your advertisement text as an open file in time for the booking deadline to the address below.
Digital printing material:PDF, optimised for print on CD-ROM + proof, or by E-mail, or ISDN
Business terms and conditionsplease find also at www.maschinenmarkt.de/business-terms
Technical Information
Switzerland4 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India
LASERTECHNIK FÜR DIE PRODUKTION >> D52Produktion mit Laserlicht revolutioniert die Fertigung
>> SCHWERPUNKT: HANNOVER MESSE Die Zukunftsmusik spielt bereits >> 30
AUTOMATION & ANTRIEBSTECHNIK Mechanischer Hydrauliktester >> 36
ZULIEFERINDUSTRIE Intelligentere Lagertechnik >> 44
LASERTECHNIK Gelaserte Waffen >> D60
MEDIZINTECHNIK Mikrospritzgiessen für Lab-on-a-Chip >> 80
SCHWEIZER MASCHINENMARKT >> AUSGABE 10 >> 114. JAHRGANG >> FR. 8.50 >> 08. MAI 2013
DIE INDUSTRIEZEITSCHRIFT FÜR DIE PRAXISSchweizer Maschinenmarkt
++++ www.maschinenmarkt.ch ++++
MIT
GRÖSSTEM
OCCASIONSMARKT
Scope: Industry
Size of magazine: 210 x 297 mm (width x height), DIN A 4
Type Area: 185 mm x 267 mm, 6 columns each 29 mm wide
Printing material, printing, binding:Digital printing material (please see on page 3),offset printing, perfect binding
Advertising fractional sizes and rates:Advertising fractional sizes and rates:
Rate Card no. 015, valid from 01/01/2014
Characteristics:Leading technical magazine for the capital goods industry.Provides technical information and ideas for management and staff onsubjects such as production, automation, welding, driving-moving-controlling,fluid mechanics, sensor systems, materials and surface finishing, materialflow, logistics, maintenance, process installations, design, machine elements,operating efficiency, joining and fastening, subcontracting industry, designengineering and CAx.
Target group:Technical and commercial managers, decision-makers in all industrial enter-prises, specialists in technical schools, research and development institutes.
Frequency: bi-weekly
Printed circulation: 12,500 copies
total net paid circulation: 1,714 copies; of these subscriptions: 1,630 copies;of these free copies: 82; free circulation: 9,526 copies(WEMF-audited 2012)** WEMF is an independent company dealing with media research and is responsible forthe circulation control of printed publications in Switzerland.
Place of publication: Thalwil/CH
Publisher: Vogel Business Media AG
Switzerland(German speaking issue)
SMM Schweizer Maschinenmarkt
SMM/MSM-GUIDEPurchasing guide for theSwiss industry– divided into subject areas.Frequency: annually (November)Circulation: 8,000 copiesMedia Data on request
www.smmguide.ch
Readership analysis by branch:
page coloured €
1/1 1,371.–
1/2 788.–
1/3 788.–
1/4 492.–
1/8 125.–
Size Width x Height (mm) Columns Basic price €
1/1 page 185 x 267 6 2,930.–
1/2 page 90 x 267185 x 131
36
1,490.–
1/3 page 59 x 267185 x 85
26
1,077.–
1/4 page 90 x 131185 x 63
36
793.–
1/8 page 59 x 9790 x 63185 x 29
236
441.–
Inside cover 185 x 267 6 3,663.–
Back cover 185 x 267 6 4,396.–
Extra charge for special positions:Must special position: 10 % on top of the gross rate b/wPosition in the text: 25 % on top of the gross rate b/wAdvertisement: 100 % on top of the gross rate b/wIsland position: 300 % on top of the gross rate b/w
Colour charge: (1c=4c)
Extra charges for special sizes:
Double page spread:b/w € 4c €5,616.– 7,049.–
Junior page: b/w (Size 148 x 204 mm) 1,807.– €(Colour charges as 1/2 page)
Reductions: (for insertions placed within the space of a year)
Series contract:3 times 6 times 13 times 24 times6 % 12 % 18 % 24 %
Orders running longer than one year: Please enquire about terms
Bound inserts and loose inserts: on request
Classified adverts (MM Börse):2.13 € for 1 column (29 mm wide and 1 mm high)2.54 € with red as 2nd colour; 2, 4 or 6 columns.
Advertising deadline:Recommendation ads: 8 workdays prior to publicationOccasional ads, available capacities, miscellaneous and job ads:Friday, 8:00 h prior to publication date
Electronic advertising on: www.smm.ch(e.g. Banner) on request
All prices are exclusive of applicable VAT and subject to change.
Materials7 %
Industrial IT3 %
Power engineering,environmentalengineering
5 %
Automation29 %
Logistics,materials handling
5 %
Subcontractingindustry25 %
Joining3 %
Manufacturing23 %
ZWEISPRACHIGE AUSGABE / EDITION BILINGUEDEUTSCH/FRANZÖSISCH / FRANÇAIS/ALLEMAND
Werkplatz SchweizHier finden Sie: leistungsfähige Zulieferer, Produktions- undHandelsbetriebe sowie Dienstleister und Betriebe mit freien Kapazitätenaus der ganzen Schweiz.
Rubrik- und StichwortverzeichnisSämtliche Lieferanten sind gegliedert in 14 Rubriken und nach alphabetisch sorti-erten Stichwörtern in Deutsch und Französisch im Stichwortverzeichnis aufgeführt.
Entreprises SuissesIci vous trouvez: des sous-traitants performants, des sociétés deproduction et commerciales, des prestataires de services ainsi quedes entreprises de toute la Suisse qui ont des capacités libres.
Index des rubriques et Mots-clésTous les fournisseurs sont répartis en 14 catégories en fonction demots-clés. Cette liste, se trouvant dans l‘index, est triée parordre alphabétique en langue allemande et française.
Dezember 2013CHF 20.–www.smm.ch
Décembre 2013CHF 20.–www.msm.ch
Nr./N°DER SCHWEIZ
EN SUISSE1
Einkaufsführer für die Schweizer MEM-IndustrieGuide d'achat pour l'industrie suisse
GUIDE
DIGITA
L
WWW.SMM.CH
WWW.MSM
.CH
mm_industrial_englisch_140219.indd 4mm_industrial_englisch_140219.indd 4 19.02.2014 07:57:2719.02.2014 07:57:27
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 5
SMM Schweizer Maschinenmarkt Publication Programme 2014
IssueNo.
PublicationDate
BookingDeadline Topics/Dossiers Trade Fairs
1/2 17. Jan. 07. Jan.Review: SPS/IPC Drives, Automation and drive engineeringSupply industry, plastic, production engineering
Swissplastics,21. – 23. January 2014, Luzern
3 29. Jan. 17. Jan.Supply industry, Production engineeringSpecial: Maintenance
Easyfairs Maintenance, 05. – 06. February 2014, Zurich
4 12. Feb. 31. Jan.
Logistics and materials handling, sheet metal working(incl. joining andwelding), supply industryCUTTING EDGE SWISS TECHNOLOGY, circulation: 15,300 copiesSMM special issue for Southern Germany(supplement toMMMaschinenMarkt, Germany)
LogiMAT, 25. – 27. February 2014, Stuttgart
Süd D 24. Feb 31. Jan CUTTING EDGE SWISS TECHNOLOGY, circulation: 15,300 copies, SMM special issue for Southern Germany(supplement in MMMaschinenMarkt Germany)
5 26. Feb. 14. Feb.Production engineering, supply industry, logistics and materials handlingSpecial: Medical engineering
Metav, 11. – 15. March 2014, DüsseldorfGrindtec, 19. – 22. March 2014, Augsburg
6 12. March 28. Feb.Sheet metal working (incl. joining andwelding)Supply industry, production engineering
Easyfairs Verpackungen, 26. – 27. March 2014, ZurichBasel World, 27. March – 03. April 2014, Basel
7 26. March 14. MarchPreview: Hannover Messe, Automation and drive technology, supply industrySpecial: Industrial software
Hannover Messe, 07. – 11. April 2014, HanoverTube/Wire, 07. – 11. April 2014, Düsseldorf
8 09. April 28. March
Switzerland as business location, quo vadis? – Opinions, interviews,statements, Focus: Production engineeringSuppy industry, production engineering, automation and drive engineeringSpecial: Swiss CEOs comment on the situation of Switzerland as business
location
9 23. April 08. AprilPreview: SiamsProduction engineering, supply industry, automation and drive engineeringSpecial: Used machines
USETEC, 05. – 07. May 2014, CologneSiams, 06. – 09. May 2014, MoutierControl, 06. – 09. May 2014, Stuttgart
10 07. May 24. AprilPreview: CeMAT, trade fair review Hannover Messe Production engineeringSpecial: Maintenance
CeMAT, 19. – 23. May 2014, HanoverMaintain, 03. – 06. June 2014, Munich
11 21. May 09. MayAutomation and drive engineering, Supply industry, production engineering,Special: Medical engineering
Medtec Europe, 03. – 05. June 2014, GenfAutomatica, 03. – 06. June 2014, MunichAutomation, 03. – 06. June 2014, Friedrichshafen
Süd D 26. May 02. May CUTTING EDGE SWISS TECHNOLOGY, circulation: 15,300 copies, SMM special issue for Southern Germany(supplement in MMMaschinenMarkt Germany)
12 04. June 22. MayPreview: EPHJ-EPMT-SMTReview: Siams, sheet metal working (incl. joining and welding)Special: Laser technology for production
EPHJ-EPMT-SMT, 17. – 20. June 2014, GenfLasys, 24. – 26. June 2014, StuttgartO&S, 24. – 26. June 2014, Stuttgart
13 18. June 05. JuneProcessing of challenging materials, production engineering,medical engineeringSpecial: Logistics and materials handling
14/15 02. July 20. June Robotics for modern production, production engineering, supply industry Swissmen-Symposium,Ostschweizer Technologiesymposium (OTS)
16 30. July 17. July Main annual issue: «Efficient Production» German/French – large circulation: more than 20,000 copies
17 13. Aug. 31. July Production engineering, supply industry, automation and drive engineering
18 27. Aug. 14. Aug.Preview: Sindex, Automation and drive engineering, production engineering,logistics and materials handlingSpecial: Medical engineering
Sindex, 02. – 04. September 2014, BernPack&Move, 09. – 12. September 2014, BaselWorld Medtech Forum, 17. – 19. September 2014, Luzern
Süd D 08. Sept. 14. Aug. CUTTING EDGE SWISS TECHNOLOGY for AMB, issue: 15,300 copiesSMM special issue for Southern Germany (supplement to MMMaschinenMarkt, Germany)
19 10. Sept. 29. Aug. Preview: AMBProduction engineering, industrial software, logistics and materials handling
AMB, 16. – 20. September 2014, Stuttgart
20 24. Sept. 12. Sept.Preview: Motek assembly, handling and automationProduction engineering, supply industrySpecial: Materials engineering
Motek+Bondexpo, 06. – 09. October 2014, StuttgartAluminium, 07. – 09. October 2014, DüsseldorfComposites Europe, 07. – 09. October 2014, Düsseldorf
21 08. Okt 26. Sept.
Sheet metal working (incl. joining and welding)Logistics and materials handling, supply industryFakuma – Materials engineering
Fakuma, 14. – 18. October 2014, FriedrichshafenEuroblech, 21. – 25. October 2014, HanoverIFAS, 21. – 24.October 2014, StuttgartFachpack, October 2014, Nuremberg
22 22. Oct. 10. Oct.Preview: Prodex, SwisstechProduction engineering, supply industry, materials engineering, automationand drive engieering
Vision, 04. – 06. November 2014, StuttgartProdex, 18. – 21. November 2014, BaselSwisstech, 18. – 21. November 2014, Basel
23 05. Nov. 23. Oct.Preview: Prodex, SwisstechProduction engineering, supply industry, automation and drive engineering,logistics and materials handling, medical engineering
Compamed, 12. – 14. November 2014, DüsseldorfProdex, 18. – 21. November 2014, BaselSwisstech, 18. – 21. November 2014, Basel
GUIDE 18. Nov. 29. Sept. SMM/MSM-GUIDE – BUYING GUIDE FOR THE SWISS INDUSTRY – GERMAN/FRENCH – CIRCULATION: 8,000 COPIES
Tradefair
18. Nov.19. Nov.20. Nov.
31. Oct.TRADE FAIR DAILY FOR PRODEX, SWISSTECHProduction engineering, supply industry, automation and drive engineeringThree up-to-date SMM/MSM Dailies for Prodex and Swisstech. Total circulation: 3 x 10,000 copies
24 19. Nov. 07. Nov.
Preview: SPS/IPC DrivesAutomation and drive engineering, Production engineeringSpecial: Industrial software
SPS/IPC/Drives, 25. – 27. November 2014, NurembergEuromold, 25. – 28. November 2014, Frankfurt a.M.SMM-Kongress 2014: Schneller weiter, leichter: StarkeMaterialien – perfekte Fertigungsprozesse
Süd D 24. Nov. 31. Oct. CUTTING EDGE SWISS TECHNOLOGY, circulation: 15,300 copiesSMM special issue for Southern Germany (supplement to MMMaschinenMarkt, Germany)
25/26 03. Dec. 21. Nov. Supply industry, production engineering, materials engineering
1/2 16. Jan.2015
06. Jan.2015
Review: Prodex, Swisstech, Production engineering, supply industry, automation and drive engineeringSwissmechanik – New from the Association and Medical Cluster in every 2nd issue
mm_industrial_englisch_140219.indd 5mm_industrial_englisch_140219.indd 5 19.02.2014 07:57:2919.02.2014 07:57:29
Switzerland6 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India
Switzerland(French speaking issue)
MSM Le Mensuel de l’industrie
Readership analysis by branch:
Characteristics:Leading technical magazine for the capital goods industry in the Frenchspeaking part of Switzerland. Provides monthly technical information andideas for management and staff on subjects such as production, automation,materials, surface finishing, material flow, logistics and subcontractingindustry.
Target group:Technical and commercial managers, decision-makers in all industrial enter-prises, specialists in technical schools, research and development institutes.
Frequency: monthly
Printed circulation: 8,000 copies
total net paid circulation: 1,013 copies; of these subscriptions: 963 copies;of these free copies: 48; free circulation: 6,022 copies(WEMF-audited 2012)** WEMF is an independent company dealing with media research and is responsible forthe circulation control of printed publications in Switzerland.
Place of publication: Thalwil/CH
Publisher: Vogel Business Media AG
Scope: Industry
Size of magazine: 210 x 297 mm (width x height), DIN A 4
Type Area: 185 mm x 267 mm, 6 columns each 29 mm wide
Printing material, printing, binding:Digital printing material (please see on page 3),offset printing, perfect binding
Advertising fractional sizes and rates:
Rate Card no. 015, valid from 01/01/2014
MSM/SMM-GUIDEPurchasing guide for theSwiss industry– divided into subject areas.Frequency: annually (November)Circulation: 8,000 copiesMedia Data on request
www.msmguide.ch
Size Width x Height (mm) Columns Basic price €
1/1 page 185 x 267 6 2,930.–
1/2 page 90 x 267185 x 131
36
1,490.–
1/3 page 59 x 267185 x 85
26
1,077.–
1/4 page 90 x 131185 x 63
36
793.–
1/8 page 59 x 9790 x 63185 x 29
236
441.–
Inside cover 185 x 267 6 3,663.–
Back cover 185 x 267 6 4,396.–
Extra charge for special positions:Must special position: 10 % on top of the gross rate b/wPosition in the text: 25 % on top of the gross rate b/wAdvertisement: 100 % on top of the gross rate b/wIsland position: 300 % on top of the gross rate b/w
Colour charge: (1c=4c)
page coloured €
1/1 1,371.–
1/2 788.–
1/3 788.–
1/4 492.–
1/8 125.–
Extra charges for special sizes:
Double page spread:b/w € 4c €5,616.– 7,049.–
Junior page: b/w (Size 148 x 204 mm) 1,807.– €(Colour charges as 1/2 page)
Reductions: (for insertions placed within the space of a year)
Series contract:3 times 6 times6 % 12 %
Orders running longer than one year: Please enquire about terms
Bound inserts and loose inserts: on request
Classified adverts (MM Börse):2.13 € for 1 column (29 mm wide and 1 mm high)2.54 € with red as 2nd colour; 2, 4, or 6 columns.
Advertising deadline:Recommendation ads: 8 workdays prior to publicationOccasional ads, available capacities, miscellaneous and job ads:Friday, 8:00 h prior to publication date
Electronic advertising on: www.msm.ch(e.g. Banner) on request
All Prices are exclusive of applicable VAT and subject to change.
Materials7 %
Industrail IT3 %
Power engineering,environmentalengineering
5 %
Automation29 %
Logistics, materialshandling5 %
Subcontractingindustry25 %
Joining3 %
Manufacturing23 %
ZWEISPRACHIGE AUSGABE / EDITION BILINGUEDEUTSCH/FRANZÖSISCH / FRANÇAIS/ALLEMAND
Werkplatz SchweizHier finden Sie: leistungsfähige Zulieferer, Produktions- undHandelsbetriebe sowie Dienstleister und Betriebe mit freien Kapazitätenaus der ganzen Schweiz.
Rubrik- und StichwortverzeichnisSämtliche Lieferanten sind gegliedert in 14 Rubriken und nach alphabetisch sorti-erten Stichwörtern in Deutsch und Französisch im Stichwortverzeichnis aufgeführt.
Entreprises SuissesIci vous trouvez: des sous-traitants performants, des sociétés deproduction et commerciales, des prestataires de services ainsi quedes entreprises de toute la Suisse qui ont des capacités libres.
Index des rubriques et Mots-clésTous les fournisseurs sont répartis en 14 catégories en fonction demots-clés. Cette liste, se trouvant dans l‘index, est triée parordre alphabétique en langue allemande et française.
Dezember 2013CHF 20.–www.smm.ch
Décembre 2013CHF 20.–www.msm.ch
Nr./N°DER SCHWEIZ
EN SUISSE1
Einkaufsführer für die Schweizer MEM-IndustrieGuide d'achat pour l'industrie suisse
GUIDE
DIGITA
L
WWW.SMM.CH
WWW.MSM
.CH
mm_industrial_englisch_140219.indd 6mm_industrial_englisch_140219.indd 6 19.02.2014 07:57:2919.02.2014 07:57:29
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 7
MSM Le Mensuel de l’industrie Publication Programme 2014
IssueNo.
PublicationDate
BookingDeadline Topics/Dossiers Trade Fairs
1/2 13. Feb. 03. Feb.
Preview: SimodecIndustrial electronics, décolletage and supply industry,plastics engineering, sheet metal workingSpecial: Watchmaking, automation
Simodec, 25. – 28. February 2014, F-La Roche-sur-Foron
3 20. March 10. March
Preview: Industrie LyonProduction engineering, joining and welding,materials engineeringSpecial: Watchmaking, medical engineering
Easyfairs Verpackungen, 26. – 27. March 2014, ZurichBasel World, 27. March – 03. April 2014, BaselIndustrie Lyon, 31. March – 04. April 2014, LyonHannover Messe, 07. – 11. April 2014, HanoverMedtec France, 09. – 10. April 2014, Lyon
4 30. April 16. April
Preview: SIAMSIndustrial software, décolletage and supply industry,production engineering, logisticsand materials handlingSpecial: Automation, medical engineering
Siams, 06. – 09.May 2014, MoutierMedtec Europe, 03. – 05. June 2014, Stuttgart
5 11. June 28. May
Preview: EPHJ-EPMT-SMTProduction engineering, materials engineeringSpecial: Watchmaking
EPHJ-EPMT-SMT, 17. – 20. June 2014, Genf
6 30. July 17. July Main annual issue: «Efficient Production»German/French – large circulation: more than 20,000 copies
7 28. Aug. 18. Aug.
Preview: SindexPreview: MicronoraIndustrial electronics, décolletage and supply industry,plastics engineering, logistics and materials handlingSpecial: Medical Engineering
Sindex, 02. – 04. September 2014, BernPack&Move, 09. – 12. September 2014, BaselWorld Medtech Forum, 17. – 19. September 2014, LuzernMicronora, 23. – 26. September 2014, Besançon
8 02. Oct. 22. Sept.
Preview: FakumaPreview: MidestSheet metal working, plastics engineering,joining and welding
Fakuma, 14. – 18. October 2014, FriedrichshafenEuroblech, 21. – 25. October 2014, HanoverMidest, 04. – 07. November 2014, Paris
9 06. Nov. 27. Oct.
Preview: Swisstech, ProdexIndustrial electronics, production engineering,automatic lathes and supply industrySpecial: Automation
Prodex, 18. – 21. November 2014, BaselSwisstech, 18. – 21. November 2014, BaselSMM-Kongress 2014: Faster, farther, lighter: Strong materials –perfectproduction processes
Guide 18. Nov. 29. Sept. SMM/MSM-Guide – Buyers Guide for the Swiss industry – German/French – circulation: 8,000 copies
TradeFair
18. Nov.19. Nov.20. Nov
31. Oct.
Trade Fair Daily for Prodex, Swisstech Three up-to-date SMM/MSM Trade Fair Dailies for Prodex andSwisstech. Total circulation: 3 x 10,000 copies
10 04. Dec. 24. Nov.
Automation instead of outsourcing / Designengineering and production in Suisse RomandeDécolletage and supply industry, materialsengineering, logistics and materials handlingSpecial: Watchmaking
mm_industrial_englisch_140219.indd 7mm_industrial_englisch_140219.indd 7 19.02.2014 07:57:3219.02.2014 07:57:32
SMM MSM Online 2014
Guide/company databaseUsers search for expertise and solutions in the Vogel B2B onlinenetwork. With your company entry, we can present the rightsolution provider along with this content: Your company is not onlylisted in our company database but it also appears in the suitableeditorial context.
Print Guide and Digital GuideThe SMM/MSM Guide is the multi-media platform for Swisssuppliers, manufacturers and dealers in the MEM industry andrepresents about 2000 companies. The companies listed in thePrint Guide are categorized in 14 sections and feature a bilingualindex, facilitating a quick search for suitable manufacturers andsuppliers. A useful reference guide for design engineers, buyers,workshop managers and interested staff.
The Digital Guide makes it possible for you to present your com-pany along with more detailed information. In addition to contactinformation, you can provide company information, news, productpresentations, videos, events, social media links, downloads andmuch more. The company profiles are linked with editorial contentand supplied in a related environment. Thus, the company profilesprovide users directly with the suitable solution providers.
We offer pure benefit – with print and digital formats
Your customers are our readers, and they visit our web platforms.If they search for Swiss manufacturers, dealers or suppliers, com-panies with available capacities and industrial service providers,they will benefit from high-class results and valuable customercontacts.
Switzerland8 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India
Booknow!
Advertising
deadline:
15 Oct. 2013
mm_industrial_englisch_140219.indd 8mm_industrial_englisch_140219.indd 8 19.02.2014 07:57:3219.02.2014 07:57:32
Banner Placement Price/monthresp. 1 newsletter distribution (netprices in EUR, not discountable)
Format***
Wallpaper Homepage/Run-on-Site*Topic channel
860.00860.00
Top 728x90, right120x600 or imagefile for background1280x1024
Leaderboard Homepage/Run-on-Site*Topic channel
650.00650.00
728 × 90
Skyscraper Homepage/Run-of-Site*Topic channelNewsletter**
650.00650.00550.00
160 × 600
Rectangle Homepage/Run-on-Site*Topic channel
783.00783.00
300 × 250
Full Banner Homepage/Run-on-Site*Topic channelNewsletter**
400.00400.00250.00
468 × 60
Teaser box Homepage/Run-on-Site*Topic channel
425.00425.00
Title max. 30characters, textmax. 300characters, plusphoto or logo
Banderole ad HomepageTopic channel
1144.001144.00
770 x 250 open21 x 250 closed
Half-page ad HomepageTopic channelNewsletter**
1144.001144.00973.00
300 x 600
Billboard Homepage/Run-on-Site*Topic channelNewsletter**
1144.001144.00973.00
996 x 250680 x 250
Text Ad Newsletter only** 638.00 300 characters + 40charactersImage 100 x 100 px
Further formats on request.* Run-on-site also comprises
the company database** The SMM newsletter is published 2x
per week with a circulation of 7100copies. The MSM newsletter ispublished weekly with a circulationof 2300 copies.
*** For more information about thetechnical specifications forbanners, please visitwww.kunden.vogel.de/techspecs
Guide Database Company Entry Net price/yearin EUR, not discountable
Premium Prominent placement – efficient entry. With the Premium companyentry, you present your products (photo, text and link to product URL) andservices in an attention getting environment.
746.00
Business The Business company entry is an attractive placement at a fairrate, including short description of company.
550.00
Please contact us with any queries:
Vogel Business Media AGSeestraße 95CH-8800 ThalwilTel. +41 44 722 77 00Fax +41 44 720 10 [email protected]
Trudi HalamaSales managerTel. +41 44 722 77 [email protected]
Advertising Channel Net price/yearin EUR, not discountable
Whitepaper/ on-demand webcast 3 months 4,250.00 incl. leads
Live webcast/webinar 3 months 5,500.00 incl. leads
Video ad 1 months 860.00
Co-branded standalone newsletter 1 distribution 3,000.00
Co-branded standalone newsletter in relation with campaign 1 distribution 1,500.00
All prices in EUR, plus tax, subject to alteration of prices; BK: 10%
www.smm.chwww.msm.chSMM MSM Online 2014
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 9
mm_industrial_englisch_140219.indd 9mm_industrial_englisch_140219.indd 9 19.02.2014 07:57:3519.02.2014 07:57:35
Switzerland10 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India
Austria
Rate Card no. 020, valid from 01/01/2014Scope: Industry
Magazine format: 210 x 297 mm (width x height), DIN A 4
Type Area: 180 mm x 265 mm 4 columns each 45 mm wide
Printing material, printing, binding:Digital print material (see page 3), Offset printing, adhesive binding
Advertising formats and rates: (1c=4c)
MMMaschinenMarkt –Das österreichische Industriemagazin
Characteristics:“MM MaschinenMarkt – Das österreichische Industriemagazin“ is the poly-technic magazine for the Austrian manufacturing industry focusing on practiceand user focused editorial content. MM MaschinenMarkt contains technicalarticles, product information, industry news as well as reports from researchand innovation. The three main magazine sections largely follow the real pro-cess flow of a manufacturing enterprise: PROLOG (phase prior to the actualproduction), PRODUCTION (as logical center) as well as EPILOG (phase afterproduction).
Target group:Our readers are decision-makers in small, medium and large companies ofthe Austrian capital goods industry, trade and commerce as well as technicalservice providers. Sub-groups of the target group are reached through alter-nating distribution.
Frequency: 12 times a year
Circulation: 10,500 copiesPlace of publication: Vienna, AustriaPublisher: Technik & Medien Verlagsges.m.b.H.
Recipient Structure AnalysisDistribution by Industry Sector:
Metal production, metal working 27 %Automation, drive engineering,energy, electrical engineering, electronics 22 %Machine building 22 %Software 11 %Technical trade 10 %Other 8 %
Total 100 %
Operational Position
Corporate management 32 %Plant management, production management 28 %Development, design engineering, research 25 %Purchasing, sales, marketing 10 %Other 5 %
Size Width x Height(mm)
Columns Basic Rate* € Width x Heightbled off*+ 3mm bled
1/1 page 180 x 265 4 4,557.00 210 x 2972/3 page 180 x 175
118 x 26542
3,843.00 210 x 195133 x 297
1/2 page 180 x 13092 x 265
24
2,730.00 210 x 150102 x 297
1/3 page 180 x 8560 x 265
41
2,079.00 210 x 10572 x 297
1/4 page 92 x 13045 x 256180 x 62
421
1,554.00 59 x 297210 x 82
1/8 page 87 x 6241 x 130180 x 28
214
903.00 210 x 48
Junior page 125 x 185 3 3,255.00 133 x 205
Front page 210 x 297+3 mm
4 6,363.00 210 x 297
Bleed: Bleed formats on request.
Colour charge: none (colors according to Euroscale)
Extra charge for special positions (non-discountable):Back cover: 25 %Inside front and back cover: 20 %Other positions (minimum 1/4 page): 15 %
Rates for special formats:Consecutive ad pages recto/verso and double pages, up to 4 colors(colours according to Euroscale)
Consecutive pages recto/verso: on requestDouble page spread: on request
Bound inserts and loose inserts:
per 1,000 up to 20 g up to 30 g up to 40 g367.50 € 399.00 € 430.50 €
In Addition prices on request.
Minimum format: 105 × 148 (DIN A6), maximum format: 210 × 297 mm (DIN A4).Delivery of loose or bound inserts (untrimmed) free print shop. Conditions: Insertrates not discountable. Booking of partial circulation for specific federal statespossible, price on request.
Classified ads (MM Börse):4.10 € plus VAT for a single-column millimeter line (45 mm wide, 1 mm high).10.- € charge per ad for box number.
Online Advertising:Banner format: IAB Banner - 468 × 60 Pixel (gif, jpeg, flash)Placement on homepagePrice per month: € 200.- (1, 3, 6 and 12 months can be booked)Banners have to be provided in ready-for-use format according to IAB specifications(www.iab-austria.at).www.technik-medien.at or www.maschinenmarkt.at
All prices are exclusive of applicable VAT and subject to change.
Prices are subject to change.
24 % 24 % 21 % 11 % 11 % 9 %
32 % 29 % 22 % 11 % 6%
Cancellation of advertisements:Title pages: up to max. 4 months prior to publicationCover pages: up to max. 2 months prior to publicationAll other advertisements: up to max. 1 month prior to publication
Discounts on request.
*Printing of advertisements in bleed format is subject to 10% surcharge.
Characteristics:
MMFORM IN PERFEKTION
KOMPLETTBEARBEITUNG
WFL zeigt auf der EMO Millturns mit neuen Innovationen für mehr Produktivität.
DAS ÖSTERREICHISCHE INDUSTRIEMAGAZIN
9|2013Erscheinungsdatum: 5. September 2013
www.maschinenmarkt.at
M
axim
ale Z
ustel
ldaue
r: 5 W
erkt
age
MMSPECIAL
UMWELT-TECHNIK
MASCHINENMARKT
EMO 2013DIE WELT DER METALLBEARBEITUNG
SCHWEISSEN & SCHNEIDENINNOVATIONSSCHAU IN ESSEN
FACHPACK 2013DIE VIELFALT DES VERPACKENS
MMVolume 18th-2014
mm_industrial_englisch_140219.indd 10mm_industrial_englisch_140219.indd 10 19.02.2014 07:57:3519.02.2014 07:57:35
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 11
MMMaschinenMarkt –Das österreichische Industriemagazin Publication Programme 2014
Exhibitions 2014JanuaryEuroguss, 14.-16.1.2014, NurembergNortec, 21.-24.1.2014, HamburgAutomation Schweiz, 29.-30.1.2014, Winterthur
FebruaryMaintenance Schweiz, 5.-6.2.2014, ZurichE-world, 11.-13.2.2014, EssenLogiMAT 25.-27.2.2014, Stuttgartembedded world 25.-27.2.2014, NurembergMAINTENANCE 26.-27.2.2014, Dortmund
MarchInt. Eisenwarenmesse, 9.-12.3.2014, CologneCeBIT, 10.-14.3.2014, HannoverEMV, 11.-13.3.2014, DüsseldorfMetav, 11.-15.3.2014, DüsseldorfInt. Handwerksmesse, 12.-18.3.2014, MunichAmper, 18.-21.3.2014, BrnoGrindTec, 19.-22.3.2014, AugsburgMessTec & Sensor Masters, 25.-26.3.2014, StuttgartVerpackung Schweiz, 26.-27.3.2014, ZurichRACIOENERGIA, 26.-29.3.2014, Bratislava
AprilTube, 7.-11.4.2014, DüsseldorfWire, 7.-11.4.2014, DüsseldorfHannover Messe, 7.-11.4.2014, HannoverFastenerFair, 8.-10.4.2014, HannoverPaintExpo, 8.-11.4.2014, Karlsruhe
MayUSETEC, 5.-7.5.2014, CologneSMT Hybrid Packaging, 6.-8.5.2014, NurembergSmart Automation Austria, 6.-8.5.2014, ViennaIntertool/Schweissen, 6.-9.5.2014, ViennaControl, 6.-9.5.2014, StuttgartMETPACK, 6.-10.5.2014, EssenInterpack, 8.-14.5.2014, DüsseldorfCeMAT, 19.-23.5.2014, HannoverPCIM Europe, 20.-22.5.2014, NurembergPlastpol, 27.-30.5.2014, Kielce/Poland
Juneall about automation, 3.-5.6.2014SENSOR+TEST, 3.-5.6.2014, NurembergSüdTec, 3.-5.6.2014, StuttgartStanztec, 3.-5.6.2014, PforzheimMEDTEC, 3.-5.6.2014, StuttgartAutomatica, 3.-6.6.2014, MunichMaintain, 3.-6.6.2014, MunichLASYS, 24.-26.6.2014, StuttgartO&S, 24.-26.6.2014, Stuttgartparts2clean, 24.-26.6.2014, Stuttgart
SeptemberPack&Move, 9.-12.9.2014, BaselAMB, 16.-20.9.2014, StuttgartVerpackung Austria, 24.-25.9.2014, ViennaMSV, 29.9.-3.10.2014, Brno
OctoberComposites Europe, 7.-9.10.2014, StuttgartAluminium, 7.-.9.10.2014, DüsseldorfMotek, 6.-9.10.2014, StuttgartFakuma, 14.-18.10.2014, FriedrichshafenEuroBLECH, 21.-25.10.2014, Hannover
Novembertransfairlog, 4.-6.11.2014, HamburgVision, 4.-6.11.2014, Stuttgartelectronica, 11.-14.11.2014, MunichProdex, 18.-21.11.2014, BaselSwisstech, 18.-21.11.2014, BaselSPS IPC Drives, 25.-27.11.2014, NurembergEuroMold, 25.-28.11.2014, Frankfurt/Main
DecemberValve World Expo, 2.-4.12.2014, Düsseldorf
UPDATE,RESEARCH,EQUIPMENT
PROLOG PRODUKTION EPILOG SPECIALEXHI-BITIONS
MM 1AD/ED: 7. 1.PD: 24. 1.
S P E C I A L P U M P S
MM 2AD/ED: 31. 1.PD: 21. 2.
PROLOGDESIGNENGINEERING.
SIMULATION.SOFTWARE&MORE
PRODUCTIONMACHINES.PRODUCTION.AUTOMATION&MORE
EPILOGQUALITY.STORAGE.LOGISTICS&MORE
Material Handling |Corporateinterconnection
LogiMAT,Metav
MM 3AD/ED: 3. 3.PD: 25. 3.
PROLOGDESIGNENGINEERING.
SIMULATION.SOFTWARE&MORE
PRODUCTIONMACHINES.PRODUCTION.AUTOMATION&MORE
EPILOGQUALITY.STORAGE.LOGISTICS&MORE
Export Market China |Tips for economicsuccess
HannoverMesse
MM 4aAD/ED: 28. 3.PD: 25. 4.
S P E C I A L S M A R T W I E N
MM 4bAD/ED: 28. 3.PD: 25. 4.
S P E C I A L I N T E R T O O L
MM 5AD/ED: 18. 4.PD: 12. 5.
PROLOGDESIGNENGINEERING.
SIMULATION.SOFTWARE&MORE
PRODUCTIONMACHINES.PRODUCTION.AUTOMATION&MORE
EPILOGQUALITY.STORAGE.LOGISTICS&MORE
Medical Technic |Technological innovationsfordiagnosticsandtreatment
CeMAT,Automa-tica
MM 6-7AD/ED: 23. 5.PD: 16. 6.
PROLOGDESIGNENGINEERING.
SIMULATION.SOFTWARE&MORE
PRODUCTIONMACHINES.PRODUCTION.AUTOMATION&MORE
EPILOGQUALITY.STORAGE.LOGISTICS&MORE
MaintenanceMonitoring, service andmaintenance
LASYS,parts2c-lean
MM 8AD/ED: 28. 7.PD: 18. 8.
PROLOGDESIGNENGINEERING.
SIMULATION.SOFTWARE&MORE
PRODUCTIONMACHINES.PRODUCTION.AUTOMATION&MORE
EPILOGQUALITY.STORAGE.LOGISTICS&MORE
Energy | Efficient gene-ration and distribution
MM 9AD/ED: 18. 8.PD: 8. 9.
PROLOGDESIGNENGINEERING.
SIMULATION.SOFTWARE&MORE
PRODUCTIONMACHINES.PRODUCTION.AUTOMATION&MORE
EPILOGQUALITY.STORAGE.LOGISTICS&MORE
Lightweight ConstructionConstructiontechnologyformaterialandenergysaving
AMB,Motek
MM 10AD/ED: 22. 9.PD: 13. 10.
PROLOGDESIGNENGINEERING.
SIMULATION.SOFTWARE&MORE
PRODUCTIONMACHINES.PRODUCTION.AUTOMATION&MORE
EPILOGQUALITY.STORAGE.LOGISTICS&MORE
Electromobility |Charging, storage,research
EuroBLECH,Swisstech& Prodex
MM 11AD/ED: 27. 10.PD: 17. 11.
PROLOGDESIGNENGINEERING.
SIMULATION.SOFTWARE&MORE
PRODUCTIONMACHINES.PRODUCTION.AUTOMATION&MORE
EPILOGQUALITY.STORAGE.LOGISTICS&MORE
Food Technology |Production, labeling,packaging
SPS IPCDrives,EuroMold
MM 12AD/ED: 18. 11.PD: 9. 12.
PROLOGDESIGNENGINEERING.
SIMULATION.SOFTWARE&MORE
PRODUCTIONMACHINES.PRODUCTION.AUTOMATION&MORE
EPILOGQUALITY.STORAGE.LOGISTICS&MORE
Awards – Overview |Company awards in 2014
UPDATE | NEWS4BUSINESSCompany news, trade fairs, events,seminars, people, markets
RESEARCH | DEVELOPMENT4INNOVATION |News from research and development
EQUIPMENT | BASICS4FACTORIESPlant construction, energy supply &distribution, pneumatics, pumps, plantequipment, lubricants, service,maintenance, industrial safety
MM | SPECIAL | Different additional topics(monthly)
PROLOG | DESIGN ENGINEERING.SIMULATION.SOFTWARE&MORETraining, purchasing, material procurement,production planning, design engineering,engineering, industrial design, C technolo-gies, software & IT, simulation, prototyping,mold making
PRODUKTION | MACHINES.PRODUCTION.AUTOMATION&MOREMachine building, production engineering,welding, automation, drive engineering,robotics, handling, process control,industrial PCs, process engineering, visu-alization, software, surface engineering,materials
EPILOG | QUALITY.STORAGE.LOGISTICS&MOREMeasurement and test, quality assurance,packaging, labeling, storage, intralogistics,materials handling, in-house transport,software
OVERVIEWOFSECTIONS
mm_industrial_englisch_140219.indd 11mm_industrial_englisch_140219.indd 11 19.02.2014 07:57:3919.02.2014 07:57:39
12 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India Switzerland
Poland
MM Magazyn Przemyslowy
Characteristics:
MM Magazyn Przemyslowy is the leading technical magazine for managersand engineers in the Polish industry.MMMagazyn Przemyslowy is published and distributed in Polish languageby Vogel Business Media sp.zo.o.
Printed circulation: 5,000-7,000 copies
Frequency: monthly, 10 times a year
Place of publication:Wroclaw/PL
Publisher: Raven Media sp. z o.o
Scope: Industry
Size of magazine: 210 x 297 mm (width x height), DIN A 4
Type Area: 183 mm x 266 mm, 3 columns each 58 mm wide
Printing material, printing, binding:Digital printing material (please see on page 3),offset printing, perfect binding
Advertising fractional sizes and rates: (1c=4c)
Rate Card no. 021, valid from 01/01/2014
Distribution by industry sector:
Machine building 29 %
Metal production, metal working 26 %
Automation and electrical engineering 13 %
Plastics, plastics processing, chemical industry 8 %
Finishing 6 %
Energetics, Mining 5 %
Technical good trade 4 %
Other sectors 4 %
Transport, logistics, storage 2 %
Research and development 2 %
Science, technical universities, libraries 1 %
Total 100.0 %
Size Standard formatsWidth x Height(mm)
With bleedWidth x Height(mm)
Columns Basic price €
1/1 page 190 x 270 216 x 303 4 3,300.–
1/2 page 94 x 270190 x 133
109 x 303216 x 151
24
1,815.–
1/3 page 190 x 8862 x 270
216 x 9774 x 303
41
1,210.–
1/4 page 190 x 6594 x 13346 x 270
216 x 73105 x 15158 x 303
421
990.–
1/8 page 94 x 6546 x 133190 x 31
105 x 7358 x 151216 x 39
214
580.–
Colour charges: (none up to full colour)Standard colours according to the European colour pattern
Extra charge for special positions:Back cover: 25 %Inside front and back cover: 20 %Other positions: 15 %
Extra charges for special sizes:Consecutive pages recto/verso and double pages (up to 4 colours according tothe European colour pattern)
Consecutive pages recto/verso:2 pages 4,950.– €
Double page spread: 6,600.– €
Junior page: (Size 136 x 190 mm) 2,270.– €Standard 120,5 x 188 mmwith bleed 136,5 x 210 mm
Bleed charges:for all sizes, also for single-side bleed only 330.– €
Reductions: (for insertions placed within the space of a year)
Space contract:1 page 2 pages 4 pages 8 pages5 % 10 % 15 % 20 %
Series contract:3 times 5 times 10 times 15 times5 % 10 % 15 % 20 %
Orders running longer than one year: Please enquire about terms
Bound inserts and loose inserts: on request
Classified adverts (MM Börse):2.90 € for a single line (46 mm wide and 1 mm high) plus translation costs,smallest size 46 x 50 mm or 94 x 25 mm.10.00 € for box no.
Electronic advertising on: www.magazynprzemyslowy.pl(e.g. Banner) on request
Prices are subject to change.
mm_industrial_englisch_140219.indd 12mm_industrial_englisch_140219.indd 12 19.02.2014 07:57:3919.02.2014 07:57:39
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 13
MM Magazyn Przemyslowy Publication Programme 2014
AD: Advertising Deadline | PD: Publication Date
Issue/Dead-lines
Management and MarketMain topics – Technology and processes
Trade Fairs and ExhibitionsProduction Automation Design und
construction
1/2 Plastic processing industryTrade fairs in 2014Finance
FormingProduction machining
- mechanical surfacetreatment
Industrial automation- sensorsNetwork & industrial
communication
Materials- composites, rubberand plasticsC Technology
EPLA, Poznan, 26.-28.03.2014
AD17.01.
PD03.02.
3 Automation of Polish factoriesControl SystemsIT Business
Welding and cuttingProduction machining
- sheet metalprocessing
- metal cuttingproduction
Hydraulics andpneumaticsWelding robots
Surface technologyDesign: CAD/CAM
Automaticon,Warszawa, 25.-28.03.2014STOM-TOOL / STOM-BLECH / CONTROL-STOM / SPAWALNICTWO / EXPO-SURFACE / WIRTOPROCESY, Kielce,26.-28.03.2014
AD14.02.
PD03.03.
4 Production logisticsHandlingIndustrial safety
Production machiningMetalworking
Automation –assemblySafety systems
Process Engineering- pumps, compressors,fittings and pipelinesOils, lubricants and
coolants
AD17.03.
PD01.04.
5 Energy EngineeringPlastic machinesIT Business
Plastic moldingProduction machining
Control systemsMonitoringand diagnosis
Materials- composites, rubberand plastics
EXPOPOWER / greenPOWER,Poznan, 13.-15.05.2014PLASTPOL, Kielce, 27.-30.05.2014AD
17.04.
PD05.05.
6 Machine-Building IndustryCNC MachinesLeasing
Metal cuttingproductionProduction machiningWelding and cutting
Automation –control systemsIndustrial robotics
Joining technologiesMeasurementand test
ITM - Polska: Mach-Tool / Metalforum /Hape / Surfex / Welding,Poznan, 03.-06.06.2014AD
16.05.
PD02.06.
7/8 MaintenanceIndustrial Vision SystemsFinance
Machinery operationsJoing: welding,soldering, surfacetechnology
Sensor systemsMonitoringand diagnosis
Oils, lubricants andcoolantsC Technology
AD18.06.
PD07.07.
9 Energy for industryMechanical pressesFinance
Production machining- internal machiningMetal formingLean manufacturing
CNC control systemsElectrical engineeringand electronics
Measurementand testSurface technology
LOGISTYKA / MSPO,Kielce, 01.-04.09.2014EnergeTAB, Bielsko-Biala, 16.-18.09.2014EXPOCHEM, Katowice, 16.-18.09.2014Metal / Aluminium & Nonfermet /ControlTech, Kielce, 30.09.-02.10.2014
AD14.08.
PD01.09.
10Machine toolsIT BusinessEnvironmental protection in industry
ProcessingtechnologyProduction machiningWelding and cutting
Drive EngineeringMaintenance –process control
Design: CAD/CAMMeasurementand test
TOOLEX, Sosnowiec, 30.09.-02.10.2014Poleko, Poznan, 13.-16.10.2014ExpoWELDING / SteelMET / SURF-PROTECT / SCRAP Expo / TEZ Expo /Foundry EXPO,Sosnowiec, 14.-16.10.2014EUROTOOL / BLACH-TECH-EXPO,Kraków, 14.-16.10.2014HPS, Katowice, 21.-23.10.2014MAINTENANCE, Kraków, 29.-30.10.2014
AD15.09.
PD30.09.
11 Automation IntegratorsIndustrial robots and manipulatorsIT Business
Production machiningFormingJoining
Automatic productionlineHydraulicsand pneumatics
Oils, lubricantsand coolantsCompositesSurface technology
KOMPOZYT-EXPO,Krakow, 19.-21.11.2014RubPlast EXPO / HAPexpo / OILexpo /ROBOTshow, Sosnowiec, 25.-27.11.2014AD
17.10.
PD03.11.
12 Industry in 2015 – forecast and opinionsModern technologies in industryLogistics
Production machining- metal cuttingproductionLaser cutting
Drive engineeringLogistics systems
C TechnologyMeasurementand test
AD19.11.
PD05.12.
mm_industrial_englisch_140219.indd 13mm_industrial_englisch_140219.indd 13 19.02.2014 07:57:4119.02.2014 07:57:41
14 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India Switzerland
Czech Republic
Characteristics:MM Pr°umyslové spektrum is a technical magazine for the management inthe Czech industry.
MM Pr°umyslové spektrum presents plenty of up-to-date information fromindustry and reports on new trends and trade fairs etc., not only from theCzech Republic itself but from around the world.
Target groups:Are reached by a system of alternating distribution based on the specificcontent of each issue.
Circulation: 9,000 copies
Frequency: 10 times a year
Place of publication: Prague/Cz
Publisher:MM publishing s.r.o (Ltd.)
Target Group by Industry:
Metal production/metal working 26 %Machine building 20 %Automation and electrical engineering 15 %Logistics and transportation industry 9 %Plastics and rubber processing, chemical industry 8 %Science & research, technical universities 7 %Power engineering 5 %Automotive industry, vehicle construction 5 %Precision mechanics/optical instruments 3 %Other industry 2 %
Total 100 %
Readership analysis:Top management 29 %Design, processes, R & D 22 %Commercial section, marketing dept. 20 %Engineering section management 17 %QA/QC, manufacturing 7 %Other 5 %
Total 100 %
Scope: Industry
Size of magazine: 210 x 297 mm (width x height), DIN A 4
Type Area: 180 mm x 270 mm, 4 columns each 46 mm wide
Printing material, printing, binding:Digital printing material (please see on page 3),offset printing, perfect binding
Advertising fractional sizes and rates: (1c=4c)
Extra charges for special sizes:Consecutive pages recto/verso and double pages, (up to 4 colours accordingto the European colour pattern):
Consecutive pages recto/verso:2 pages 4,950.– €
Double page spread: 6,600.– €
Junior page: 2,270.– €(Format: Standard 134 x 210 mm, with bleed 155 x 216 mm)
Bleed charges:for all sizes, also for single-side bleed only 330.– €
Reductions: (for insertions placed within the space of a year)
Space contract:1 page 2 pages 4 pages 8 pages5 % 10 % 15 % 20 %
Series contract:3 times 5 times 10 times 15 times5 % 10 % 15 % 20 %
Bound inserts and loose inserts: on request
Classified adverts (MM Börse):2.90 € for a single line (46 mm wide and 1 mm high) plus translation costs,smallest size 46 x 50 mm or 94 x 25 mm. For box no. 10.– €
Electronic advertising on: www.mmspektrum.com(e.g. Banner) on request
Prices are subject to change.
Rate Card no. 020, valid from 01/01/2014
Colour charges: (none up to full colour)Standard colours according to the European colour pattern
Extra charge for special positions:Back cover: 25 %Inside front and back cover: 20 %Other positions: 15 %
SizeStandard formatsWidth x Height(mm)
With bleedWidth x Height(mm)
Columns Basic price €
1/1 page 180 x 270 216 x 303 4 3,300.–
1/2 page 88 x 270180 x 132
109 x 303216 x 163
24
1,815.–
1/3 page 58 x 270180 x 82
79 x 303216 x 113
14
1,210.–
1/4 page 88 x 132180 x 6446 x 270
109 x 163216 x 9563 x 303
241
990.–
1/6 page 118 x 60180 x 40
139 x 91216 x 71
34
630.–
1/8 page 88 x 64 109 x 95 2 580.–
MM Pru°myslové spektrum
mm_industrial_englisch_140219.indd 14mm_industrial_englisch_140219.indd 14 19.02.2014 07:57:4219.02.2014 07:57:42
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 15
MM Pru°myslové spektrum Publication Programme 2014
In all issues this topics are presented:Manufacturing technology, machine tools, tooling, materials and CAx
AD: Advertising Deadline | PD: Publication Date
Issue Dates Main Topics MM Science JournalTechnical / Commerical Supplements Trade Fairs and Exhibitions
1/2AD20.01.
Forming technologyMaterials parting and joining(welding, laser, plasma)Foundry, metallurgy
Technology of materials joining and parting
Production Programm of members ofAssociation of Engineering Technology in 2014
Metav, 11.-15.03.2014, DüsseldorfWire and Tube, 07.-11.04.2014, Düsseldorf
PD12.02.
3AD14.02.
Automatization manufacturing systems forengineering industryMeasuring at engineering in processesLinear admeasurement
MM Science Journal (March issue)
Plastics – hight -tec technology, materials andproducts for medicine (reflection K2013)
New Products atAMPER – Int. Electrical Engineering and Elec-tronics Fair, 18.-21.03.2014, Brno
PD11.03.
4AD24.03.
Industrial maintenanceQuality control and standards (TQM)Lubricants, industrial oils, cutting fluids
Transport and logistics in engineeringproduction plants
PD15.04.
5AD22.04.
Cutting tools, materials for cuttingAdvanced engineering materials
MSV Nitra – Int. Engineering Fair in Slovakia,20.-23.05.2014, Nitra
PD13.05.
6AD16.05.
New machine technologies and machinesfor cuttingCNC controllers
MM Science Journal (June issue)
Engineering industry market financing
PD11.06.
7/8AD04.06.
Gears, bearings and clutchesPumps, Compressors
Pneumatics and hydraulics components
PD25.06.
9AD11.08.
1st trade fair issue focused on machiningtechnology56th International Engineering Fair Brno 2014InternationalMachine Tools ExhibitionBrno 2014
Participation preview of members ofAssociation of Engineering Technology at theMSV Brno Fair
MSV Brno – Int. Engineering Fair,IMT Brno – Int. Machine Tool Exhibition,29.09.-03.10.2014, Brno
AMB Stuttgart, 16.-20.09.2014, StuttgartPD02.09.
10AD01.09.
2nd trade fair issue focused on news atIMT and MSV Brno
MM Science Journal (October issue) MSV Brno – Int. Engineering Fair,IMT Brno – Int. Machine Tool Exhibition,29.09.-03.10.2014, Brno
PD23.09.
11AD17.10.
Ecodesign in construction and production(cutting, forming)Ecological aspects of cutting technologies,energy saving and productivity increase –environmental impact
Surface technologies Conference of progressive technologies ofsurface technology
PD12.11.
12AD22.11.
Machining technologies, machines, cuttingtools and materials at metal industryAccessories for machining and formingUnconventional cutting technologies –electroerosion, EDM, wire cutting
MM Science Journal (December issue)
Software for Engineers – Engineering soft-ware focused on ecodesign, productivity,increase and sustainable designPD
09.12.
mm_industrial_englisch_140219.indd 15mm_industrial_englisch_140219.indd 15 19.02.2014 07:57:4319.02.2014 07:57:43
16 Switzerland (SMM)
Switzerland (MSM)
SMM/MSM (Online)
Austria Poland Czech Republic
Hungary Ukraine Turkey China Thailand MM Electronics
Korea Indonesia Online
India
Hungary
MM Müszaki Magazin
Characteristics:MM Müszaki Magazin is Hungary’s leading, independent technical magazine.MM Müszaki Magazin presents business information, feature articles and news about national and international products, innovations and developments of use to manufacturers and users, sales stuff and buyers.
Target group: Managers and professional development engineers and users in industry, the crafts and trade.
Printed circulation: 8,000 copies
Frequency: 10 times a year (2 double issues 1/2, 7/8) Place of publication: Budapest/H
Publisher: MediaCity Magyarország Kft.
Geographical distribution: (see page 17)
Distribution by industry sector:
Mechanical engineering, metalworking, precision tools, automation, drive systems, hydraulics, pneumatics, fluidics, mounting and assembly lines, C-Technologies 47.2 %
Water, gas, oil, electric power (and their generation and distribution), water treatment and purification, recycling, environmental protection 12.9 %
Measurement and control, instrumentation, process control, safety 11.1 %
Electrical engineering, industrial electronics, micro-electronics, electrical elements, electronic components, optoelectronics, sensors 10.2 %
Vehicle Industry 6.6 %
Telecommunication, computing, information and organisation systems, office systems 6.1 %
Local authorities, other business sectors 3.5 %
Heating, air-conditioning, installation, sanitation, lighting technique 2.4 %
Total 100.0 %
Rate Card no. 020, valid from 01/01/2014
Scope: Industry
Size of magazine: 210 x 297 mm (width x height), DIN A 4
Type Area: 190 mm x 270 mm, 3 columns each 46 mm wide
Printing material, printing, binding:Digital printing material (please see on page 3), offset printing, saddle stitching
Advertising fractional sizes and rates: (1c=4c)
Colour charges: (none up to full colour) according to the European colour pattern
Extra charge for special positions:Back cover 25 %Inside front and back cover 25 %Other Positions 10 %
MM Cover Page Story
4 pages 5,950.– €8 pages 8,330.– €
Extra charges for special sizes:Consecutive pages recto/verso and double pages, (up to 4 colours according to the European colour pattern):
Consecutive pages recto/verso:2 pages 4,950.– €
Double page spread: 6,600.– €
Junior page: 2,360.– €(Format: Standard 136 x 190 mm, with bleed 142 x 210 mm)
Bleed charges for all sizes, also for single-side bleed only 330.– €
Reductions: (for insertions placed within the space of a year)
Space contract:1 page 2 pages 4 pages 8 pages5 % 10 % 15 % 20 %
Series contract:4 times 8 times 16 times 33 times5 % 10 % 15 % 20 %
Classified adverts (MM Börse):2.90 € for a single line (46 mm wide and 1 mm high) plus translation costs, smallest size 46 x 50 mm or 94 x 25 mm. For box no. 10.– €
MM Yearbook November - Mechanical engineering (Format: on request)
Electronic advertising on: www.mm-online.hu(weekly electronic newsletter)
Prices are subject to change.
SizePrinting size
without bleed (mm)
Printing size with bleed
(mm)
Delivery size with additional mm
Basic price €
1/1 page 190 x 277 205 x 297 215 x 307 3,300.–
1/2 page 100 x 277190 x 135
110 x 297205 x 145
120 x 307215 x 155
1,815.–
1/3 page 190 x 8070 x 277
205 x 10085 x 297
215 x 11095 x 307
1,210.–
1/4 page 190 x 6590 x 13540 x 277
205 x 70100 x 15050 x 297
215 x 80110 x 16060 x 307
990.–
1/8 page 90 x 6540 x 135190 x 30
100 x 7550 x 150205 x 40
110 x 8560 x 160215 x 50
580.–
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 17
MM Müszaki Magazin
Geographical distribution:
Publication Programme 2014
Bacs-Kiskun,Csongrad
8 %
Fejer, Vesprem, Zala8 %
Szabolcs-Szatmar-Bereg, Hadju-Bihar
6 %
Jasz-Nagykun-Szolnok,Bekes5 % Tolna, Somogy,
Baranya5%
Nograd, Heves,Borsod-Abauj-Zemplen
8 %
Pest, Komarom,Esztergom
17 % Budapest38 %
Györ-Moson-Sopran, Vas5 %
Issue No, Dates Topics Fairs and Exhibitions
1/2AD27.01.
Used machinesSystems and technologiesInternational trade fairs overviewLabor market
Employment & IndustryMechanical engineering industryFasteners
PD10.02.
3AD24.02.
Automation and automatingIndustrial Robots and manipulatorsMeasurement and control
Mechanical engineeringAutomation technologyMetalworking
Magyar Regula,March, Budapest (International exhibition for auto-mation, regulation and laboratory techniques)METAV, 11.-15.03.2014, DüsseldorfAMPER, 18.-21.03.2014, BrnoPD
10.03.
4AD24.03.
Process control systemsAutomation technologySupply industrySubcontracting
Mechanical engineeringAutomation technologyMetalworking
Hannover Messe, 07.-11.04.2014, Hannoverwire 2014 + Tube 2014, 07.-11.04.2014, DüsseldorfINTERTOOL+SCHWEISSEN/JOIN EX, 06.-09.05.2014, WienPD
07.04.
5AD05.05.
Mechanical engineering industryMaintenanceSurface treatmentFinancingPlastics processingPneumatics and hydraulics
Pumps and fittingsIndustrial robots and manipulatorsLaser technologiesIndustrial electronicsDrive engineeringMedical technologies
IndustriAutomation, 27.-30.05.2014, Budapest(International trade fair for industry and automation)AUTOMATICA+MAINTAIN 2014, 03.-06.06.2014, MunichEUROPE, 03.-06.06.2014, Stuttgart
PD19.05.
6AD10.06.
Quality control and standars (TQM)CertificatesEnergy technologytransmissionsMechanical engineering industry
Building industryBuilding engineeringHeatingVentilationAir condition technology
PD23.06.
7/8AD21.07. Supply industry
SubcontractingIndustrial robots and manipulators
Laser technologiesPlastics industry
PD04.08.
9AD25.08.
Mechanical engineeringAutomation technologyMetalworking
CAD/CAM systemsAutomotive industry
AMB, 27.09.-05.10.2014, StuttgartMSV+IMT+Automation, 29.09.-03.10.2014, BrnoIAA, 25.09.-02.10.2014, HannoverPD
08.09.
10AD22.09.
Process control systemsDrive engineeringAutomation technologyAssembly
Industrial electronicsMechanical engineering industrySheet metal working industry
DCS, October 2014, Miskolc (International symposium for ProcessControl Systems and Industrial Communication Systems)IAC, October 2014, Budapest (International conference for Auto-mation)Motek+Bondexpo, 06.-09.10.2014, StuttgartEuroBLECH, 21.-25.10.2014, Hannover
PD06.10.
11AD20.10.
Mechanical engineering industryIndustrial safety and securityAviation and aerospaceAutomotive industry
LogisticsTransport and materials handlingPackaging
AUTOMOTIVE HUNGARY, November 2014, Budapest (Internationaltrade exhibition for automotive industry)
PD03.11.
MMYearbook
AD03.11.
Mechanical engineering industryPlastics processingPneumatics and hydraulicsPumps and fittings
LogisticsIndustrial robots and manipulatorsAutomationMeasurement and control
PD17.11.
12AD01.12.
Chemical industryPlastics industryoils and lubricants
Mechanical engineeringAutomation technology
PD15.12.
AD: Advertising Deadline | PD: Publication Date
mm_industrial_englisch_140219.indd 17mm_industrial_englisch_140219.indd 17 19.02.2014 07:57:5119.02.2014 07:57:51
Switzerland18 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India
Ukraine
MM Money & Technologies
Characteristics:Ukrainian Industrial magazineMMMoney and Technology is a title which pro-vides middle and top managers of industrial enterprises since 1999 with vitalinformation on modern equipment, technologies and solutions, deployment ofwhich increases production effectiveness, reduces power consumption andsupports high quality products.Editorial materials are to guide the CTO, design managers, power engineers aswell as the relevant department and service division leaders at the market ofproduction equipment, industrial automation means, electrotechnology, infor-mation management systems and communications.
Circulation: 10,000 copies
Frequency: 10 times a year
Place of publication: Kiev, UkrainePublisher: Soft-Press
Distribution analysis by industrial branches:
Rate Card no. 015, valid from 01/01/2014
Scope: Industry
Size of magazine: 210 x 297 mm (width x height), DIN A 4
Type Area: 180 mm x 266 mm, 3 columns
Printing material, printing, binding:Digital printing material (please see on page 3),offset printing, perfect binding
Advertising fractional sizes and rates: (1c=4c)
Size Width x Height (mm) Basic price €
1/1 page 180 x 266 3,700.–
3/4 page 139 x 266180 x 199
2,770.–
2/3 page 122 x 266180 x 175
2,550.–
1/2 page 88 x 266180 x 131
2,150.–
1/3 page 58 x 266180 x 86
1,650.–
1/4 page 45 x 26688 x 131180 x 64
1,485.–
1/8 page 43 x 13188 x 64180 x 30
920.–
Size Width x Height (mm) €
Inside front cover 210 x 297 4,440.–
Inside back cover 210 x 297 4,440.–
Back cover 210 x 297 4,440.–
Extra charge for special positions: 20%
Reductions:(for insertions placed within the space of a year)
Space contract:3 pages 5 pages 9 pages 12 pages5 % 10 % 12 % 15 %
Orders running longer than one year:Please enquire about terms
Bound inserts and loose inserts: on request
Classified adverts (MM Börse):3.10 € for a single line (58 mm wide, 1 mm high) plus translation costs,smallest size 58 mm x 50 mm. 10.– € charge for box no.
Electronic advertising on: www.ht.ua/issue/mmdt(e.g. Banner) on request
Prices are subject to change.
Colour charges: (none up to four colours)according to the European colour pattern
Extra charges for special positions and special sizes: (1c=4c)
Readership analysis
Industrial companies of otherforms of property (large, middle)
52 %
Administrative estates,branch committees,
ministries6 %
State industrialenterprises
(large, middle)17 %
Consultingcompanies
2 %
Juridical andadvocatory companies
2 %Financial-economic
institutions21 %
Engineers15 %Other
5 %
General managers/owners of companies/
enterprises18 %
Department leaders62 %
mm_industrial_englisch_140219.indd 18mm_industrial_englisch_140219.indd 18 19.02.2014 07:57:5119.02.2014 07:57:51
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 19
MM Money & Technologies Publication Programme 2014
IssueNo.
Publicationdate
Bookingdeadline
Materialdeadline
Main Topics of the Issue Industrial events
1/2 15. February 26. December 15. January
Cover Story: Power SavingCogeneration technologyIndustrial heat generators (review)Power carrier management systemsUninterrupted power supply systems and components (review)Industrial illumination (review)Flowmeters and regulators of the expense of technological environments (review)Process equipment leasing
Energy SavingElectric EquipmentPower EngineeringFebruary, Donetsk
3 15. March 26. January 1. February
Cover Story: Industrial AutomationIndustrial computersIndustrial control systems (PlantWeb)Data-processing centersIndustrial controllers (review)Robots and the automated technological lines (review)Adjustable electric drive (review)
ElectricaMarch, Lvov
4 15. April 26. February 1. March
Cover Story: Power Engineering, Electric Equipment, ElectronicsMES-systems (review)CAD (review)Cabling and conductor productsReduction gear motorsUninterrupted power supply systems and components (review)
elcomUkraineApril, Kiew
5 10. May 26. March 1. April
Cover Story: Automation and drivesAdjustable electric drive (review)Industrial robots and manipulatorsCAD (review)Fast prototyping: technologies and the equipmentProcess equipment leasing
Machine Building,MetallurgyMay, Zaporozhye
6 2. June 26. April 1. MayCover Story: Power Engineering, Energy Saving, EcologyPower effective technologies and equipmentPower stations on the base of renewable power-suppliers
Kyiv Smart House &BuildingSeptember, Kiew
7/8 25. August 26. May 1. June
Cover Story: Industrial power supplyHeat pump systems for industrial enterprisesIndustrial UPS systemsEcology control toolsAutomated systems of complex power-carrier accounting
9 20. September 26. July 1. August
Cover Story: Industrial AutomationERP systemsCAD systemsSCADA systemsIndustrial computersIndustrial robots and manipulatorsWireless networks as a part of equipment management systems
Fuel & Energy ComplexSeptember, Kiew
AISS-AutomationSeptember, Kiew
10 20. October 26. August 1. September
Cover Story: Resource-saving technologiesTechnological process management systems sensorsNew technologies of metal processingInformation technologies at the industrial enterpriseCNC machines
Power Engineering.ElectronicsOctober, Kharkov
MashProm, October,Dnepropetrovsk
Energy,October, Zaporozhye
11 20. November 26. September 1. October
Cover Story: Industrial AutomationMotion sensors in the technological transport systemsIndustrial controllersAutomated systems of industrial equipment diagnosticsHydraulic units in the industrial automation systems
Industrial ForumNovember, Kiew
12 10. December 26. October 1. November
Cover Story: Independent power systemsBest products and solutions of the yearInterviews with leading persons of industrial equipment market
mm_industrial_englisch_140219.indd 19mm_industrial_englisch_140219.indd 19 19.02.2014 07:57:5519.02.2014 07:57:55
Switzerland20 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India
MM Makina Magazin
Turkey
Characteristics:MM Makina Magazin is the polytechnical magazine for the Turkish industry.Editorial themes are specially orientated to the information requirements ofmanagers and engineers in industry, trade and the service sector.
MMMakina Magazin in Turkish language is published and distributed byDünya Super Veb Ofset A.S., Istanbul in cooperation with Vogel BusinessMedia, MM Industrial Magazines, Würzburg.
Circulation: 10,000 copies
Frequency: 12 times a year
Place of publication: Istanbul/TR
Publisher: Dünya Super Veb. Ofset A.S.
Rate Card no. 020, valid from 01/01/2014
Scope: Industry
Size of magazine: 210 x 297 mm (width x height), DIN A 4
Type Area: 190 mm x 270 mm, 4 columns each 46 mm wide
Printing material, printing, binding:Digital printing material (please see on page 3),offset printing, perfect binding
Advertising fractional sizes and rates: (1c=4c)
Distribution according to company size:
In this analysis company size refers to the number of employees in thebusiness that buyMMMakina Magazin. 58 % of these sales are made tocompanies employing a staff between 25 and 99.
1 - 9 employees 2 %10 - 24 employees 16 %25 - 49 employees 32 %50 - 99 employees 25 %100 - 249 employees 7 %250 - 499 employees 8 %500 - 999 employees 7 %1000 and more employees 3 %
Total 100 %
Colour charges:(none up to full colour), according to the European colour pattern
Extra charge for special positions:Back cover 25 %Inside front and back cover 20 %Other Positions 10 %
Extra charges for special sizes:Consecutive pages recto/verso, and double pages, up to 4 colours,(according to the European colour pattern):
Consecutive pages recto/verso:2 pages 4,560.– €
Double page spread: 6,080.– €
Junior page: (Size 136 x 190 mm) 1,900.– €
Bleed charges: for all sizes,also for single-side bleed only 304.– €
Reductions: (for insertions placed within the space of a year)
Space contract:1 page 2 pages 4 pages 8 pages5 % 10 % 15 % 20 %
Series contract:4 times 8 times 16 times 33 times5 % 10 % 15 % 20 %
Orders running longer than one year: Please enquire about terms
Classified adverts (MM Börse):2.90 € for a single line (46 mm wide and 1 mm high) plus translation costs,smallest size 46 x 50 mm or 94 x 25 mm. For box no. 10.– €
Electronic advertising on: www.makinamagazin.com.tr(e.g. Banner) on request
Prices are subject to change.
Size Width x Height (mm) Columns Basic price €
1/1 page 190 x 270 4 3,040–
1/2 page 94 x 270190 x 134
24
1,530.–
1/3 page 190 x 8862 x 270
41
1,020.–
1/4 page 190 x 6694 x 13446 x 270
421
835.–
1/8 page 94 x 6646 x 134190 x 32
214
460.–
Distribution according to sectors of industry:
Metalworking Industry (except for automotive) 41 %Automotive Industry 11 %Electric & Electronics Industry 8 %Packaging 5 %Chemical Industry 6 %Automation, Software 6 %Universities, Chambers of Industry and Commerce 5 %Mineral Oil and Rubber Processing 4 %Construction Facilities, Installation 3 %Mining, Quarrying, Ceramics 3 %Foodstuffs, Beverages, Tobacco 3 %Textile and Leather Industry, Apparel 3 %Other Branches 2 %
Total 100 %
mm_industrial_englisch_140219.indd 20mm_industrial_englisch_140219.indd 20 19.02.2014 07:57:5519.02.2014 07:57:55
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 21
MM Makina Magazin Publication Programme 2014
Distribution according to job function: Distribution according to cities:
Engineers28 %
Industrial chamberexecutives
2 %
Technicalmanagement
16 %
Owners and topmanagement
24 %
Middlemanagement
21 %
Others2 %
Public relationsmanagers
2 %
Universities,institutes,research,education
3 %
More than half of the circulation (74%) is distributed in the eight main cities inTurkey, based on population and industrial significance. 96 % of circulation is sold/distributed in Turkey.
Istanbul32 %
Denizli2 %
Ankara7 %
Other Cities15 %
Izmir10 %
Konya4 %
Gaziantep4 %
Adana3 %
Germany4 % Bursa
9 %
Kocaeli5 %
Kayseri2 %
Tekirdac2 %
Eskisehir1 %
Issue AD PD Main Topcis Main Subjects of Fair Fairs and Events
1 16.12.2013
27.12.2013
Energy and Power SupplyEnvironmental ProtectionRenewable EnergyWater Technologies
Machine DesignIndustrial DesignSoftware
Energy Efficient Product Technologies and the Environment 5 Energy Efficiency Forum and Exhibition,08.-11.01.2014, Istanbul
2 15.01. 25.01.
HydraulicsPneumaticsIndustrial AutomationEnergy Saving Works in Factoryand Industrial Sites
Solar Energy SystemsMaterial HandlingGears and DrivesCAD, CAM, CAE
Fluid Power Technologies, Heating, Cooling, Air Condition-ing, Natural Gas Technology, Installation and Insulation(Solar Energy Special Section), Bearing, Belt, Washer, PulleyChain, Seals
IHS Adana, 13.-16.02.2014, Adana
Fluid Power, Rollexpo Turkey 201420.-22.02.2014, Istanbul
3 17.02. 25.02.
MetalWorkingTechnologiesMouldingAutomationElectrical and Elec-tronicalTechnologies
Hydraulic and PneumaticTechnologiesMaterial HandlingIndustrial AutomationDesign
Metal Machining, Moulding, Auto-mation Related In-dustries, Electrotech Energy, Electrical and ElectronicalTechnologies Fair, Hydraulic and Pneumatic TechnologiesFair, Material Handling, Storage and Logistics Fair,IndustrialAutomation Fair, Lighting, Plumbing, Electrical, Designand Building Automation Technology, Metal ProcessingMachinery, Electrical, Electronics, Automation, Hydraulics,Pneumatics Systems, Plastic Production Ma-chinery andRaw Materials, Installation, Storage, Handling
3T 2014 12th International Metal Working, Mould and Automa-tion Technologies Fair, 06.-09.03.2014, Izmir
WIN World of Industry – WIN Electrotech 2014, WIN World ofIndustry – WIN Hydraulic & Pneumatic 2014, WIN World of In-dustry – WIN Materials Handling 2014, WIN World of Industry– WIN Automation 2014, 19.-22.03.2014, Istanbul
LIGHTTECH 2014, 06.-09.03.2014, Istanbul
Middle East Manufacturing Machines and Related Industries,27.-30.03.2014, Diyarbakır
4 17.03. 25.03.
EnergySolar Energy EquipmentsWindmillsMetal WorkingTechnologiesAutomation in Food Pro-ductionFactory Automation
Electrical EquipmentsElectronicsElectromechanicalEquipmentsPower GenerationAutomationMaterial Handling
Heating, Cooling, Air Conditioning, Gas and Systems, Photo-electric Products, Solar Energy, Water Heater, Solar EnergyEquipments and Products, Automotive Fair, AutomotiveManufacturing, Distribution and Repair Food and BeverageTechnologies, Electrical, Electronics, Electromechanical,Power Generation, Automation, Metalworking, Welding,Cutting, Drilling Technologies, Hand Tools, Hydraulic, Pneu-matic Handling, Storage, Transportation and Logistics
IHS BURSA, 02.-06.04.2014, Bursa
Solarex, 10.-12.04.2014, Istanbul
Automechanika 2014 International Automotive Exhibition,10.-13.04.2014, Istanbul
Beverage Istanbul, 10.-12.04.2014, Istanbul
KONELEX 2014, ISKON 2014, 24.-27.04.2014, Konya
5 15.04. 28.04.
HeatingCoolingValvesInsulation MaterialsMetal WorkingTechnologiesMoulding
AutomationFactory AutomationMaterial Handling DesignR&DSoftware
Mould Technologies and Related Industries Fair, AutomotiveRelated Industry, Component and Spare Parts Fair, Heating,Cooling, Air Conditioning, Natural Gas, Pumps, Valves,Installation Insulation Equipment and Pipes Fair, Lift, Tech-nologies and Moving Parts Fair,Heating, Cooling, Air Conditioning, Ventilation, Insulation,Pumps, Valves, Fittings, Water Treatment, and Solar EnergySystems, Lift Technologies Fair, General Industry Fair –Metal Working and Welding Technologies
MOULD EURASIA 2014, AUTOMOTIVE RELATED INDUSTRY,07.-10.05.2014, Bursa
IHS KONYA 2014, KONYA ASANSÖR – ELEVATOR 2014,15.-18.05.2014, Konya
ISK-SODEX 2014, 07.-10.05.2014, Istanbul
INELEX, 23.-25.05.2014, Izmir
Ankara Sanayi Fuari 2014, 15.-18.05.2014, Ankara
6 15.05. 26.05.
WeldingSurface treatmentCutting Technologies
AssemblingMetal FormingOther Metal WorkingTechnologies
Assembling, Welding and Cutting Technologies, Surfacetreatment, Metalworking,Welding Technologies, Production Machineries and Materi-al Forming Technologies Fair, Metal Working Technologies
WIN World of Industry – Welding 2014, WIN World of Indus-try – Surface Treatment 2014, WIN World of Industry – MetalWorking 2014, 05.-08.06.2014, Istanbul
7 16.06. 25.06.Metal Working TechnologiesAutomation
Factory AutomationSubcontracting
Industry Fair ETSIF 2014, 02.-06.07.2014, Edirne
8 15.07. 23.07.Metal Working TechnologiesAutomationFactory Automation
SubcontractingDesign Tools and Systems
Int. Industry and Trade iEF – izmir international fair,29.08.-08.09.2014, Izmir
9 15.08. 25.08.
AutomationHydraulicsPneumatics
Food TechnologiesPackaging TechnologiesMetalWorkingTechnologies
Food and Food Technologies, Packaging, PackagingIndustry, Food and Beverage Technologies, Food Safety,Additives and Ingredients, Cooling, Ventilation, StorageSystems and Logistics Fair
CNR GIDA/FOOD / IPACK 2014 – Food and Food TechnologiesFair, 04.-07.09.2014, Istanbul
Eurasia Packaging 2014, ISTANBUL FOOD-TECH,18.-21.09.2014, Istanbul
10 15.09. 25.09.
Material HandlingMetal WorkingTechnologiesQuality ControlTest and MeasurementEquipments
Food Technologies andFood ProductionAutomationPackagingCAD, CAE, CAM
Lifting Technologies, Machine Tools, MetalProcessing Machines, Welding, Cutting, Drilling Technolo-gies, Quality Control, Test and Measurement, Food and FoodTechnologies, Packaging
AVRASYA ASANÖR – ELEVATOR, 23.-26.10.2014, Istanbul
MAKTEK EURASIA 2014, 10.-19.10.2014, Istanbul
FOODEX, 23.-26.10.2014, Izmir
TATEF, Istanbul
11 15.10. 24.10.
InnovationR&DMetal Working Technologies
Factory AutomationSubcontractingMachine DesignIndustrial Design
New Technologies and Innovations Fair – New Technologies,Inventions, Innovations, International Automotive SupplyIndustry Components Acces & Service Equipment
Innovation-R&D-Patent-University Porjects,13.-16.11.2014, Istanbul
Otomotiv-2014, 27.-30.11.2014, Istanbul
12 17.11. 25.11.
Packaging TechnologiesAutomationMetal Working
Technologies
WeldingFactory EquipmentsPipe Processing
Plastics Industry, Metal Processing Machines, Welding,Cutting, Drilling Technologies, Hand Tools, Pneumatic andHydraulic Fair, Warehouse, Handling Special Section /Sheet Metal, Pipe, Profile Processing Technologies and Re-lated Industrie Fair, Pipe and Pipe Processing Technologies
PLAST EURASIA ISTANBUL 2014,04.-07.12.2014, Istanbul
METAL / SHEET PROCESSING TECHNOLOGIES FAIR, 04.-07.12.2014, Bursa
BORUTEK 2014, 04.-07.12.2014, Bursa
mm_industrial_englisch_140219.indd 21mm_industrial_englisch_140219.indd 21 19.02.2014 07:58:0219.02.2014 07:58:02
Switzerland22 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India
China
MM Xiandai Zhizao
Scope: Industry
Size of magazine: 210 x 297 mm (width x height), DIN A 4
Type Area: 190 mm x 270 mm, 4 columns each 46 mm wide
Printing material, printing, binding:Digital printing material (please see on page 3),offset printing, perfect binding
Advertising fractional sizes and rates:
Rate Card no. 020, valid from 01/01/2014
Characteristics:MM Xiandai Zhizao editorial concept is a mixture of technical and management.All the topics are carefully selected by professional editors and experts toguide the Chinese industry market. With highest acceptance and exceptionalconfidence shown by readers, it wins the heart of most of the advertisingclients.
About the advertising market share,MM Xiandai Zhizao takes the No.1 positionin the manufacturing media, as sources from HUICONG International Information.
MM Xiandai Zhizao provides plant-based solution for China factories. Specialfocus on following some industries.
Frequency: 50 times a year
Printed circulation: 30,000 copies
Distributed circulation: 24,938 copies
Place of publication: Beijing/China
Publisher: Beijing Jigong Vogel Media Advertising Co., Ltd.
Target Group by Industry:
OEM (Original equipment manufacturer) 25%Automotive industry 10%Metal working 20%Electronics and electrical products 10%Appliance 12%General machinery 16%R&D Centre & Institute 5%Trade 2%
Recipients:
General Manager 60%R&D Manager 16%Production Manager 11%Purchase Manager 8%Others 5%
Extra charge for special positions:Back cover: 25 %Inside front and back cover: 20 %Other Positions: 10 %
Extra charges for special sizes:Consecutive pages recto/verso, and double pages, up to 4 colours,(according to the European colour pattern):
Consecutive pages recto/verso:2 pages 7,630.– €
Double page spread:up to 4c 9,980.– €
Junior page:b/w (136 x 190 mm) 2,950.– € (Colour charges as 1/2 page)
Bleed charges (not subject to discounts):For all sizes 470.– €, also for single-side bleed only.
Bound inserts and loose inserts: on request
Reductions: (for insertions placed within the space of a year)
Space contract:1 page 2 pages 4 pages 8 pages5 % 10 % 15 % 20 %
Series contract:4 times 8 times 16 times 33 times5 % 10 % 15 % 20 %
Orders running longer than one year:Please enquire about terms
Classified adverts (MM Börse):€ 4.00 for a single line (46 mm wide and 1 mm high) plus translation costs,smallest size 46 x 50 mm or 94 x 25 mm. € 10.– charge for box no.
Electronic advertising on: www.mma.vogel.com.cn(e.g. Banner) on request
Prices are subject to change.
Colour charges:For each additional colour according to the European colour pattern(not subject to discount):
Size Width x Height (mm) Columns Basic price €
1/1 page 190 x 270 4 4,700.–
1/2 page 94 x 270190 x 134
24
2,350.–
1/3 page 190 x 8862 x 270
41
1,570.–
1/4 page 190 x 6694 x 13446 x 270
421
1,175.–
1/8 page 94 x 6646 x 134190 x 32
214
590.–
page 2nd colour € 3rd colour € 4th colour € full coloured €1/1 200.– 200.– 180.– 580.–1/2 150.– 150.– 135.– 435.–1/3 150.– 150.– 135.– 435.–1/4 100.– 100.– 90.– 290.–1/8 100.– 100.– 90.– 290.–
PT PlasticsTechnologyChina*The specialist for the plastics processingindustry in China.
Frequency: 12 times per year(incl. Special issues)* Schedule on page 23
Ot
ExCo(a
Co2
Doup
Jub/
BlFo
Bo
mm_industrial_englisch_140219.indd 22mm_industrial_englisch_140219.indd 22 19.02.2014 07:58:0319.02.2014 07:58:03
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 23
MM Xiandai Zhizao
Issues No. 13-50 on next pages
Publication Programme 2014
PD: Publication Date | AD: Advertising Deadline
Issue Deadlines Main Topics Specials Exhibitions
1AD23.12.
2013 MM Top Ten NewsAnalysis of manufacturing hot and prospects2014 Demand information of important industry2014: New year‘s messages
New Year SpecialRetrospect and Prospect
Electronics China 2014, 18.-20.03.2014, ShanghaiLASER World of PHOTONICS CHINA,18.-20.03.2014, ShanghaiCCMT CHINA, 24.-28.02.2014, ShanghaiPD
06.01.
2AD06.01.
Automated production line, Composite processingequipment, Cutting tools management, Fixture,Intelligent software online testing, Robot, Coolant
CCMT Special 1CCMT Innovation Issue
CCMT China, 24.-28.02.2014, Shanghai
PD20.01.
3AD27.01.
CCMT product preview, 5-axis machining center,High eciency cutting tools, Precision machining,Coolant, Intelligent software, Laser processing
CCMT Special 2CCMT Product Preview
CCMT China, 24.-28.02.2014, Shanghai
PD10.02.
4AD07.02.
Composite processing equipment, Laser processing,Cutting tools management, Reduce the processingoverhead time, Online testing, Machine toolaccessories, MQL, Coating, Industrial oils,Laser processing
CCMT Special 3Composite Processing
CCMT China, 24.-28.02.2014, ShanghaiCWIEME, 12.-15.03.2014, Xi‘anMETAV, 11.-15.03.2014, Dusseldorf
PD17.02.
5AD10.02.
Mechatronics, Factory automation, Systemintegration solution, Intelligent motion control,Monitor & detection, Software optimization
SIAF SpecialMechatronics
SIAF, 03.-05.03.2014, GuangzhouCWIEME, 12.-15.03.2014, Xi‘anElectronica China, 18.-20.03.2014, ShanghaiPD
24.02.
6AD24.02.
Data collection customization, Talking warehouse,AS/RS realize the production storage integration,Shuttle improve the logistics eciency,Higher accuracy of order picking,Application of IOT in the logistics industry,
Electronica SpecialLogisticsInformationization
LogiMAT 2014, 25.-27.02.2014, StuttgartElectronica China 2014, 18.-20.03.2014, ShanghaiChina Electronics Fair 2014, 09.-12.04.2014, Shenzhen
PD10.03.
7AD03.03.
Energy-conservative and environment-friendly,Energy saving of air compressor, The lubricationsystem, Electrical integration, Transmission andcontrol
CIPPE SpecialEnergy-Conservative andEnviroment-Friendly
CIPPE, 19.-21.03.2014, BeijingChinaplas, 23.-26.04.2014, Shanghai
PD17.03.
8AD10.03.
Robot, 3D printing, Rapid prototyping, Mold, Ecientprocessing, Cutting tools selection and application,Processing automation
Intelligent Manufacturing SIMM, 28.-31.03.2014, ShezhenSIMTOS, 09.-13.04.2014, Seoul
PD24.03.
9AD17.03.
Servo drive technology, Transmission control, Motionintegration, Motion process optimization, Intelligentcontrol
Chinaplas SpecialMotion Control
Hannover Messe, 07.-14.04.2014, HanoverChinaplas, 23.-26.04.2014, Shanghai
PD31.03.
10AD31.03.
Blow / injection molding machinery and plasticgranulator / shredder, Ecient plastic processingtechnology, Digital technology, Green plasticindustry, Plastic mold production, Electronic controlsystems and automated productio lines, Automationand intelligence in plastic processing, Environmentprotection and safe disposal
Plastic MachinerySpecialPlastic MachineryAutomation
Chinaplas, 23.-26.04.2014, Shanghai
PD14.04.
11AD07.04.
The application of industrial robots, Managementand control of the production process, Managementand application of tools, Online measurement,Flexible production line, Unmanned machining,Intelligent manufacturing, Reduce the standby time,Internal management of enterprises
DMC Special 1Automated Production
CWMTE, 23.-26.04.2014, Chongqing
PD21.04.
12AD09.04.
Intelligent control solutions for elevator, Keycomponents‘ safety and reliability, Frequencyconversion technology in driving, Using of sensors inelevator driving system, Ecient handing of large andheavy workpieces, Energy-saving technology aboutelevator, Ecient processing in elevator‘s keycomponents, Innovation and application prospect ofthe individualized elevator
Elevator SpecialSafety and Saving Energy
2014 China International Elevator Exhibition,13.-16.05.2014, Guangzhou
PD23.04.
mm_industrial_englisch_140219.indd 23mm_industrial_englisch_140219.indd 23 19.02.2014 07:58:1519.02.2014 07:58:15
Switzerland24 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India
MM Xiandai Zhizao Publication Programme 2014
PD: Publication Date | AD: Advertising Deadline
Issue Deadlines Main Topics Specials Exhibitions
13AD14.04.
Intelligent manufacturing, Industrial communicationnetwork technology, Wireless network, Industrialcommunication standard, Wireless data transmission
IA SpecialIntelligent Manufacturing
IA-Beijing, 07.-09.05.2014, BeijingWEE, 13.-16.05.2014, GuangzhouCIE, 14.-17.05.2014, KunshanAutomation EXPO, 18.-20.06.2014, ShenzhenPD
28.04.
14AD16.04.
Large-scale processing equipment, Workpieceinspection, Green processing, Ecient processing,Cutting tools management, Laser processing
CIMES Special 1CIMES Innovation Issue
CIE, 14.-17.05.2014, KunshanCIMES, 17.-21.06.2014, Beijing
PD30.04.
15AD23.04.
Forklift of multi purpose, Reliable logisticswarehouse solution, Intelligent and integration robotsystem, Multifunction material handling solutionIntelligent forklift lifting productivity, Lean productionand lean logistics
CeMAT SpecialSupply Chain Flexibility
Auto China, 21.-29.04.2014, BeijingCeMAT, 19.-23.05.2014, HannoverHMFEC-EXPO,May 2014
PD07.05.
16AD28.04.
CIMES product preview, Ecient cutting tools, Largeworkpieces, Ecient tool, Intelligent processing,Composite processing
CIMES Special 2CIMES ProductPreview-1
CIMES, 17.-21.06.2014, Beijing
PD12.05.
17AD05.05.
Lead screw/Guideway, Spindle/Bearing, CNC system,High eciency motor, Servo system, Centrailizediubrication
CIMES SpecialIntelligent Manufacturing
MC 2014, 19.-22.05.2014, BeijingCIMES, 17.-21.06.2014, Beijing
PD19.05.
18AD07.05.
Manufacturing of locomotive vehicle key components,Advantages of composite processing, Laser cutting,Intelligent manufacture, Electronic control system andsafely operation, Transportation logistics and leanmanufacturing, The overall design and manufacture oflocomotive, The future development trend ofhigh-speed railway, Preview of MM Railway, Summit2014
Railway TransportSpecialLocomotive Manufactureand Safe Operation
Rail+Metro China, 17.-19.06.2014, Shanghai
PD21.05.
19AD12.05.
Ecient processing, High speed machining, Precisionmeasurement, Cutting tools selection and application,Design software, Material selection
DMC Special 2High-Effcient Machining
DMC, 04.-07.06.2014, Shanghai
PD26.05.
20AD14.05.
Servo drive technology, Transmission control, Motionintegration, Motion process optimization, Intelligentcontrol
CIMES SpecialMotion Control
ITMA, 16.-20.06.2014, ShanghaiCIMES, 17.-21.06.2014, Beijing
PD28.05.
21AD19.05.
CIMES product preview, 5-axis machining equip-ment, Intelligent software, Ecient cutting tools, Ecientmeasurement, Green processing
CIMES Special 3Cimes Product Preview-2
CIMES, 17.-21.06.2014, Beijing
PD02.06.
22AD21.05.
High precision processing of orthopedic implants,Ecient denture processing, Laser processing,Precision medical injection mold production, 3Dmaterial painting, Ecient processing solution of newmedical composite materials, CAM software inmedical device industry, Measuring and coating-technology, Preview of MMMedical Device Forum2014
Medical Devices SpecialEfficient, SafetyProcessing
SINO-DENTAL, 09.-12.06.2014, BeijingCIMES, 17.-21.06.2014, Beijing16th Shanghai International Machine ToolExhibition, 14.-17.07.2014, Shanghai
PD04.06.
23AD26.05.
Solve E-commerce distribution problem, Dynamicstorage enhance the competitiveness, One-stopE-commerce logistics solution, Flexible and ecientconveying and sorting, Intelligent E-commercelogistics, High storage density and high eciencyorder picking
Transport SpecialIntelligent Logistics
Transport Logistic China, 17.-19.06.2014, ShanghaiBFE, 18.-20.06.2014, Guangzhou
PD09.06.
24AD02.06.
Automated production line, High eciency xtures,Robot, Online testing, MQL, Laser processing
CIMES Special 4CIMES Thematic
CIMES, 17.-21.06.2014, Beijing
PD16.06.
25AD16.06.
Software and programming, Servo drive control,Communication network technology, Systemintegration solution, Industry application
CIROS SpecialIndustrial Robot
CIROS, 14.-17.07.2014, ShanghaiPROPACK China, 16.-18.07.2014, Shanghai
PD30.06.
mm_industrial_englisch_140219.indd 24mm_industrial_englisch_140219.indd 24 19.02.2014 07:58:1519.02.2014 07:58:15
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 25
Publication Programme 2014MM Xiandai Zhizao
PD: Publication Date | AD: Advertising Deadline
Issue Deadlines Main Topics Specials Exhibitions
26AD23.06.
Precision machining, Composite processing,Ecient processing, Machine tool accessories,Solution, Laser processing, Coating
EASTPO SpecialHigh-AccuracyMachining
EASTPO, 14.-17.07.2014, ShanghaiJNMTE, August 2014, Qingdao
PD07.07.
27AD07.07.
Mechatronics, Control unit, Drive system,High eciency motor, Scale/Servo technology
Mechatronics Cief, August 2014, Qingdao
PD21.07.
28AD14.07.
Machining center applications in the medical industry,Special materials processing, Clean processing, 3Dprinting technology, Online measurement, Surfacetreatment, Selection of cutting uid, Precisionmachining, Rapid prototyping equipment, Softwareselection
Medical SpecialImplants Processing
JNMTE, August 2014, QingdaoCONTROL CHINA, August 2014, Shanghai
PD28.07.
29AD28.07.
Enhance the logistics operation ability, Technicaldiculties of logistics automation, Logistics transfor-mation help reorganization, Manufacturingwarehousing optimization, Improve the pharmaceuti-cal cold chain, Pharmaceutical logistics and supplychain management
Logistics Optimization
PD11.08.
30AD04.08.
Intelligent control, Industrial communication networktechnology, Wireless network, Industrial communica-tion standard, Wireless data transmission, Pharma-ceutical logistics and supply chain management
MICONEX SpecialControl & Communication
MICONEX, August 2014, BeijingCONTROL CHINA, August 2014, ShanghaiWestern China International Fair,Oktober 2014, ChengduPD
18.08.
31AD11.08.
Automated production line, Cutting tools management5-axis machining equipment, Coolant, Laserprocessing, Machine tool accessories
Flexible Manufacturing CIEME, 01.-05.09.2014, ShenyangIMTS, 08.-13.09.2014, Chicagoasiamold, September 2014, Guangzhou
PD25.08.
32AD01.09.
Hydromechatronics, Transmission and control,Automation technology, Life cycle management,Lubrication solution for wind power generator
PTC ASIA Special 1Solutions
Bearing, 18.-21.09.2014, ShanghaiPTC ASIA, 27.-30.10.2014, ShanghaiCWP, Oktober 2014, Beijing
PD15.09.
33AD03.09.
Machine safety, Safety standard, Data protection,Safety bus, Safety solution
Safety & Standard
PD17.09.
34AD08.09.
Low energy ecient hoist, Green logistics of intelligentand ecient, Reduce the logistics operation cost,Improve the logistics warehouse informationmanagement, Warehouse modernization, Logisticspackage and unitary logistics
CeMATASIA Special 1Efficiency Logistics
CeMAT ASIA, 27.-30.10.2014, Shanghai
PD22.09.
35AD15.09.
Large-scale processing equipment, Ecient cuttingtools, Intelligent xture, Intelligent software, Onlinetesting, MQL, Industrial oils, Coating
IMTS SpecialIntelligent Manufacturing
IMTS, 08.-13.09.2014, ChicagoAMB, 16.-20.09.2014, Nanjing
PD29.09.
36
AD24.09.
The craft solutions of substantially increasingprocessing eciency of wind turbine parts, The corefunction of industrial control products, Optimal designand control technology of oshore wind turbine,Optimization of yaw system, Ecient handing of largeand workpieces sealing technology, Conditionmonitoring and automatic lubrication, Optimization ofthe powergeneration eciency of wind turbine in lowspeed state Application prospect of small and new typewind turbine
Wind Power SpecialIntelligent Control
CWP, Oktober 2014, Beijing
PD08.10.
37AD29.09.
Stamping, Laser processing, Waterjet cutting, Digitalprototyping, The application of rapid prototypingequipment, Bending line measurement
Sheet Metal Processing EuroBLECH, 21.-25.10.2014, HannoverCWP, Oktober 2014, Beijing
PD13.10.
38AD30.09.
Mechanical transmission and system, Mechatronics,Motion control, Safety solution
IAS Special 1Motive Power & Drive
CWP, Oktober 2014, BeijingPTC ASIA, 27.-30.10.2014, ShanghaiIAS, 04.-07.11.2014, Shanghai
PD15.10.
mm_industrial_englisch_140219.indd 25mm_industrial_englisch_140219.indd 25 19.02.2014 07:58:1519.02.2014 07:58:15
Switzerland26 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India
MM Xiandai Zhizao Publication Programme 2014
PD: Publication Date | AD: Advertising Deadline
Issue Deadlines Main Topics Specials Exhibitions
39AD08.10.
High eciency motor, Motion control, Servo system,Linear motion system
PTC ASIA Special 2Efficient Movement
PTC ASIA 2014, 27.-30.10.2014, Shanghai
PD20.10.
40AD09.10.
Improved packaging logistics and supply chainoptimization, End to end logistics managementsystem, Voice technology to achieve paperless,Visualization technology for cold storage, 2D codeand supply chain management, Food logisticsinventory management
CeMAT ASIA Special 2Logistics Visualization
CeMAT ASIA, 27.-30.2014, ShanghaiSCAN CHINA, October 2014CIIF, 04.-07.11.2014, Shanghai
PD22.10.
41AD13.10.
Intelligent manufacturing, The production ofintelligence and communication, Green manufactu-ring, Ecient xtures, Intelligent software, Online testing
MWCS SpecialLaser Processing
CIIF, 04.-07.11.2014, ShanghaiDMP, 13.-16.10.2014, Dongguan
PD27.10.
42AD15.10.
CNC machining technology of complex aviationstructure parts, Flexible modular xture, Machiningsolutions of the new type tool, Manufacture of largeaircraft key components, Laser processing,Advanced processing technology for compositematerials, Advanced measurement technology,Electronic control system of large aircraft, CAD/CAM, 3D printing, Design of electrical control system
Aviation & AerospaceSpecialComplete Solutions
Air Show China, 11.-16.11.2014, Zhuhai
PD29.10.
43AD20.10.
System integration solution, Central control system,Optimize space utilization, Factory automationintegration
IAS Special 2System Integration
IAS, 04.-07.11.2014, Shanghai
PD03.11.
44AD27.10.
Design software selection, Mold repair, Moldmaterial selection, Mold surface treatment, Fastmeasurement, Tool selection
Euromold SpecialCreative TriggeredTechnologicalInnovations
DMP, 13.-16.11.2014, DongguanEuromold, 27.-30.11.2014, Frankfurt
PD10.11.
45AD04.11.
Hydraulic control technology, HydromechatronicsGear case, Bearing, Automation technology, Statemonitoring
baumaChina SpecialReliability and Security
bauma China, 25.-28.11.2014, Shanghai
PD17.11.
46AD05.11.
Hydraulic drive system, Automation control byelectro-hydraulic and pneumatics, New sealingtechnology, Frequency conversion and energy-savingtechnology, Complex processing of key parts,Application of sensor technology, Ecient handing,Safecontrol, Preview of MM Construction MachinerySummit 2014
Construction MachinerySpecialEnergy-Saving andLow-Emission
bauma China, 25.-28.11.2014, Shanghai
PD19.11.
47AD10.11.
Automated production line manufacturing, Ecientxtures, Robot, Online testing, Intelligent software,Pallet system, Shop management system
JIMTOF SpecialHigh-Effcient Machining
JIMTOF, 30.10.-04.11.2014, Tokyo
PD24.11.
48AD24.11.
HMI, Automation communication, Ecient manage-ment, Detection&Diagnosis
Humen-MachineInteraction
PD08.12.
49AD01.12.
Big event playback, Industry case, Product highlights,Editor‘s notes
Original Set
PD15.12.
50AD08.12.
Introduction of good supplier, Creative productoverview, New technical highlights, Application cases
EnterpriseStyle&Products Highlight
PD22.12.
mm_industrial_englisch_140219.indd 26mm_industrial_englisch_140219.indd 26 19.02.2014 07:58:1519.02.2014 07:58:15
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 27
MM Show Daily List 2014MM Xiandai Zhizao
Exhibition Show Daily Frequency of Publication Publication Date
CCMT 2014 CCMT Show Daily 3 issues 24. / 25. / 27. February 2014
SIAF Guangzhou 2014 SIAF Show Daily 3 issues 03. – 05. March 2014
DMC 2014 DMC Show Daily 3 issues 04. – 06. June 2014
CIMES 2014 CIMES Show Daily 3 issues 17. – 19. June 2014
JNMTE 2014 JNMTE Show Daily 3 issues 02. – 04. August 2014
CIEME 2014 CIEME Show Daily 3 issues 01. – 03. September 2014
PTC / CeMAT 2014 PTC / CeMAT Show Daily 3 issues 27. – 29. October 2014
CIIF 2014 CIFF Show Daily 3 issues 04. – 06. November 2014
bauma China 2014 bauma Show Daily 3 issues 25. – 27. November 2014
DMP 2014 DMP Show Daily 3 issues November 2014
mm_industrial_englisch_140219.indd 27mm_industrial_englisch_140219.indd 27 19.02.2014 07:58:1519.02.2014 07:58:15
28 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India Switzerland
MM Xiandai Zhizao Events 2014
Forum Exhibition Date City
10th China International Metalworking Summit CCMT 2014 25. February 2014 Shanghai
Robots·Automation-Industry Solutions Conference IA-Beijing 2014 May 2014 Beijing
10th China International Metalworking Summit CIE 2014 15. May 2014 Kunshan
2014 International Medical Devices Advanced ManufacturingTechnology Summit Die & Mould China 2014 05. June 2014 Shanghai
International Railway Transport Equipment Advanced ManufacturingTechnology Summit
CIMES 2014
17. June 2014
Beijing
2014 International Aviation Manufacturing Forum 18. June 2014
„CeMAT come to China“ Logistics Technology Forum July 2014 Suzhou
Advanced Manufacturing Into Western Forum CWIEME 2014 19. – 20. July 2014 Chengdu
International Wind Power Equipment Advanced ManufacturingTechnology Summit CWP 2014 October 2014 Beijing
10th MM China Automation Days CIIF 2014 November 2014 Shanghai
International Construction Machinery Advanced ManufacturingTechnology Summit bauma China 2014 26. November 2014 Shanghai
mm_industrial_englisch_140219.indd 28mm_industrial_englisch_140219.indd 28 19.02.2014 07:58:1519.02.2014 07:58:15
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 29
Publication Programme 2014PT PlasticsTechnology China
Topics in each issue:Processing solutions, materials and applications, mold making, market and technology trends, supplier recommendations, new products
The specialist for the plasticsprocessing industry in China.
Issue Dates Industry Focus Special Technology Supplement Relevant show
1AD05.01.
Hollow Products Extrusion Die Injection Molding TechnologyPD
15.01.
2AD18.02.
Injection Parts Hot Runner Extrusion TechnologyPD
28.02.
3AD05.03.
Profile & Siding Auxiliary Processing Automation & AccessoryPD
15.03.
4
AD01.04.
Pipe Measuring & Control Chinaplas Chinaplas 2014,23.–26. April, ShanghaiPD
10.04.
AD01.04.
Film & Sheet Injection molding Technology Chinaplas Chinaplas 2014,23.–26. April, ShanghaiPD
12.04.
5AD05.05.
Electric & Electronics Welding Thermoforming TechnologyPD
15.05.
6AD05.06.
Hollow Products Extrusion Technology ChinaplasPD
15.06.
7AD05.07.
Profile and Siding Auxiliary Processing Automation & AccessoryPD
15.07.
8AD05.08.
Pipe Reaction Injection Molding Composites TechnologyPU ChinaChina Composites Expo,September, ShanghaiPD
15.08.
9AD05.09.
Medical Parts Measuring & Control Injection molding Technology MEDTEC China25.–26. September, ShanghaiPD
15.09.
10AD05.10.
Electric & Electronics Welding Extrusion Technology CIM Expo.,October, BeijingPD
15.10.
11AD05.11.
Film & Sheet Auxiliary Processing Hot RunnerPD
15.11.
12AD05.12.
Injection Parts Extrusion Technology Composites Technology DMP,November, DongguanPD
15.12.
mm_industrial_englisch_140219.indd 29mm_industrial_englisch_140219.indd 29 19.02.2014 07:58:1519.02.2014 07:58:15
30 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India
MM The Industrial Magazine Thailand
Thailand
Characteristics:MM The Industrial Magazine is a technical title from the range of internationalpublications of MM MaschinenMarkt.MM Thailand is the only technicalmagazine that covers topics related to the production industry in the growthmarket of Southeast Asia. The publication provides up-to-date informationon worldwide trends and new products for metal and plastics processing,automation and control, production, electronics, IT as well as logistics.The technical articles are prepared and authored by experts from researchand industry most of whom were professionally trained in Germany.
Target group:Managers and decision makers from all sectors of the industry, as wellas dealers, importers and suppliers.
Circulation: 20,000 copies
Frequency: 10 times a yearPlace of publication: Bangkok, Thailand
Publisher: Green World Media (Thailand) Company Limited
Distribution analysis by company size:
1 - 49 employees 27 %50 - 99 employees 24 %100 - 499 employees 34 %500 - 999 employees 8 %more than 999 employees 7 %
Total 100 %
Editorial Topics:
Air Compressor TechnologyAir Conditioning and VentilationAssemblyAutomation SystemsAutomotive IndustryCAD, CAM, CAP, CIMCastingControl SystemsDesign ComponentsDrive EngineeringElectrical EquipmentEnergyEnvironmental ProtectionFacility ManagementFluid PowerForgingFormingIdentification TechnologyImage ProcessingIndustrial ElectronicsIndustrial SafetyJoining and Fastening
Scope: IndustrySize of magazine: 210 x 297 mm (width x height), DIN A 4Type Area: 190 mm x 270 mm, 4 columns each 46 mm widePrinting material, printing, binding:Digital printing material (please see on page 3),offset printing, perfect binding
Advertising fractional sizes and rates: (1c=4c)
Rate Card no. 010, valid from 01/01/2014
Laser SystemsLogisticsMachine ToolsMaintenance and ServicingMaterial Handling SystemsMaterialsMeasurement and TestingMetal-Cutting ProductionPackaging and StoragePlant and WorkshopPlasticsPower EngineeringProcess EngineeringProduction InstrumentationQuality ManagementRoboticsSensor SystemsSheet Metal WorkingSoftware and CommunicationSurface TreatmentToolsUsed MachineWelding and Cutting
Classified adverts (MM Börse): (1c=4c)
Size Width x Height (mm) Basic price €1/1 page 190 x 270 2,140.–1/2 page 94 x 270
190 x 1341,070.–
1/3 page 62 x 270190 x 88
720.–
Position/Size price €Inside front cover (1/1 page) 2,940.–Back cover (1/1 page) 3,460.–Inside back cover (1/1 page) 2,740.–Front cover - flip outside (2/1 page) 5,260.–Back cover - flip inside (2/1 page) 3,780.–page 3 (1/1 page) 3,050.–page 4 (1/1 page) 2,630.–page 5 (1/1 page) 2,940.–page 6 (1/1 page) 2,520.–page 7 (1/1 page) 2,740.–page 8 (1/1 page) 2,320.–page 9 (1/1 page) 2,630.–page 11 (1/1 page) 2,520.–page 12 (1/1 page) 2,200.–page 13 - Editor page (1/3 page) 1,180.–page 19 - Content (1/2 page) 1,590.–
Size Width x Height (mm)) Columns Basic price €1/16 page 46 x 63 1 120.–1/8 page 94 x 63
46 x 12821
240.–
3/16 page 142 x 6346 x 193
31
355.–
1/4 page 46 x 25894 x 128190 x 63
124
475.–
3/8 page 142 x 12894 x 193
31
710.–
1/2 page 190 x 12894 x 258
41
945.–
9/16 page 142 x 193 3 1,180.–3/4 page 190 x 193
142 x 25843
1,420.–
1/1 page 190 x 258 4 1,890.–
Electronic advertising on: www.mmthailand.com(e.g. Banner) on request
Prices are subject to change.
Reductions: (for insertions placed within the space of a year)Space contract:2 pages 3 pages 4 pages 5 pages10 % 15 % 20 % 25 %
Series contract:6 times 12 times 18 times 24 times10 % 15 % 20 % 25 %
Special inserts:210 g/m2 paper (1/1 page) 3,090.–210 g/m2 paper - folding (4 pages) 4,330.–
Extra charge for special positions: (1c=4c)
Distribution by function:
Managing/technical directors 14 %Buyers 17 %Design engineers 43 %Production/maintenance 10 %Design engineering 11 %Other 5 %
Total 100 %
Switzerland
mm_industrial_englisch_140219.indd 30mm_industrial_englisch_140219.indd 30 19.02.2014 07:58:1619.02.2014 07:58:16
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 31
MM The Industrial Magazine Thailand Publication Programme 2014
Issue No. Publication Date BookingDeadline Printing Material Fairs and Exhibitions
1 24.12.13 19.11.13 22.11.13 Modern Manufacturing Forum 2014 # 1 @ Samut Sakorn, 23. January
2/3 28.01. 24.12.13 24.12.13Modern Manufacturing Forum 2014 # 2 @ Rayong, 26.–27. JanuaryModern Manufacturing Forum 2014 # 3 @ Ayutthaya, 27. March
4 25.03. 18.02. 21.02.Thailand Auto Parts & Accessories 2014 (TAPA 2014),The International automotive products, parts, components and accessoiries, 28. April – 01. MayModern Manufacturing Forum 2014 # 4 @ Nakornratchasima, 07.–08. May
5 30.04. 20.03. 25.03.
Intermach 2014, International Metalworking Automation and Industrial Machinery Exhibition,15.–18. MaySUBCON Thailand 2014, Thailand’s Leading Industrial Subcontracting Show, 15.–18. MaySheet Metal Asia 2014, International Sheet Metal Fabrication Technology and Machinery Exhibition,15.–18. MayAutomotive Engineering Asia 2014,International Automotive Design, Manufacturing and Engineering Exhibition, 15.–18. MayLED Expo Thailand 2014, Ideally located at the crossroads of Asia, it offers potential businessopportunities with emerging market of China, India and ASEAN Countries, 22.–24. May
6 27.05. 22.04. 25.04.
Entech Pollutec Asia 2014,International Exhibition of Environmental Protection and Pollution Control Technology, 04.–07. JunePumps & Valves Asia 2014,Asia’s Only Specialised Pumps, Valves and Fitting Hardware Trade Exhibition, 04.-07. JuneRenewable Energy Thailand 2014,Thailand International Renewable Energy Conference and Exhibition, 04.–07. JuneProPak Asia 2014, The International Processing, Filling, Packaging Technology and Conferencefor the Asian Region, 11.–14. JuneDrinkTech Asia 2014,The International Beverage and Brewing Processing and Packaging Technology Exhibition, 11.–14. JunePharmaTech Asia 2014, The International Pharmaceutical & Cosmetics Packaging & ProcessingTechnology Exhibition, 11.–14. JuneSeafoodTech Asia 2014,The International Seafood Processing, Packaging and Related Technology Exhibition, 11.–14. JunePlasTech Asia 2014, The International PET & Plastics Packaging Technology & MaterialsExhibition, 11.–14. JuneCanTech Asia 2014, The International Canmaking & Canning Technology Exhibition, 11.–14. JuneLab & Test Asia 2014, The International Laboratory Equipment, Instrumentation,Test and Measurement and Quality Control Exhibition, 11.–14. JuneModern Manufaturing Forum 2014 # 5 @ Songkla, 12. JuneManufacturing Expo 2014, 19.–22. June4 International Exhibitions on Automotive-parts and Electronics-parts Manufacturing TechnologiesInterPlas Thailand 2014, Thailand International Plastic and Rubber Technology TradeExhibition and Conference, 19.–22. JuneInterMold Thailand 2014, Thailand’s Only Machinery and Technology TradeExhibition & Conference for Mold & Die Manufacturing, 19.–22. JuneAutomotive Manufacturing 2014, ASEAN‘s Only Machinery Expo for AutomotiveParts Manufacturing, 19.–22. JuneAssembly Technology 2014, The International Integrated ManufacturingTechnology Exhibition, 19.–22. JuneIndustrial Components & Subcontracting 2014, International Industrial Parts, Components, Equip-ment, and Solutions Trade Exhibition and Conference, 19.–22. JuneIndustrial Energy & Environment Asia 2014 , International Trade Exhibition and Conference onRenewable Energy and Environment Management Technologies and Solutions forManufacturing Industry, 19.–22. JuneSecutech Thailand 2014, International Trade Fair for Security and Safety, 19.–22. June
7 25.06. 21.05. 26.05. Modern Manufaturing Forum 2014 # 6 @ Prachinburi, 17. July
8 25.07. 20.06. 25.06. Modern Manufaturing Forum 2014 # 7 @ Samutprakarn, 26. August
9 25.08. 21.07. 25.07. Modern Manufaturing Forum 2014 # 8 @ Ratchburi, 23. September
10 25.09. 21.08. 26.08. Modern Manufaturing Forum 2014 # 9 @ Chonburi, 29.–30. October
11/12 24.10. 19.09. 24.09.
METALEX 2014, The International Machine Tools and Metalworking Machinery Trade Exhibitionand Conference. Thailand’s Largest Machine Tools & Metalworking Exposition, 24.–26. NovemberSheet METALEX 2014,International Sheet Metal Technology, Machinery Trade Exhibition & Conference, 24.–26. NovemberModern Manufaturing Forum 2014 # 10 @ Chiangmai, 27. November
Topics in each issueMetal working, Machines, Mould making, Production
mm_industrial_englisch_140219.indd 31mm_industrial_englisch_140219.indd 31 19.02.2014 07:58:1719.02.2014 07:58:17
32 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India
Korea
MM Korea
Characteristics:MM Korea is a professional magazine for the technical industry, with a focuson machine building and metal working as well as electrical engineering,vehicle construction and further related topics.
Target group:Decision-makers from the Korean investment goods industry and trade as wellas service providers. Decision-makers from all industrial sectors are addressedbased on a specific dispatch key.MM Korea is moreover a platform for German (European) companies that wantto be active in the rapidly expanding East Asian markets.
Circulation: 10,000 copies
Frequency: monthlyPlace of publication: Seoul/KoreaPublisher:MM Korea CO., LTD
Rate Card no. 006, valid from 01/01/2014
etc.2 %
Machine building38 %
Metal working34 %
Electricalengineering
15 %
Vehicle construction11 %
Target groups:
Production51,7 %
CEO23,4 %
Research andDevelopment
15,6 %
Construction9,3 %
Distribution by industrial sectors:
Scope: Industry
Size of magazine: 210 x 297 mm (width x height), DIN A 4
Type Area: 190 mm x 270 mm, 4 columns each 46 mm wide
Printing material, printing, binding:Digital printing material (please see on page 3),offset printing, perfect binding
Advertising fractional sizes and rates: (1c=4c)
Size Width x Height (mm) Columns Basic price €
1/1 page 190 x 270 4 2,870.–
1/2 page 94 x 270190 x 134
24
1,710.–
1/3 page 190 x 8862 x 270
41
1,280.–
1/4 page 190 x 6694 x 13446 x 270
421
890.–
1/8 page 94 x 6646 x 134190 x 32
214
480.–
Colour charges:none up to full colour, according to the European colour pattern
Extra charge for special positions:
Back cover 25 %Inside front and back cover 20 %Other Positions 10 %
Reductions: (for insertions placed within the space of a year)
Space contract:1 page 2 pages 4 pages 8 pages5 % 10 % 15 % 20 %
Series contract:3 times 6 times 9 times 12 times5 % 10 % 15 % 20 %
Classified adverts (MM Börse):3.00 € for a single line (46 mm wide and 1 mm high) plus translation costs,smallest size 46 x 50 mm or 94 x 25 mm. For box no. 10.– €
Electronic advertising on: www.mmkorea.kr(e.g. Banner) on request
Prices are subject to change.
Switzerland
mm_industrial_englisch_140219.indd 32mm_industrial_englisch_140219.indd 32 19.02.2014 07:58:1719.02.2014 07:58:17
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 33
Publication Programme 2014MM Korea
* Advertising deadline for ads including corrections, translation and/or layout changes
EditorialNr. Date of issue Copy closing time Ad closing time * Main Thema Exhibition and display
1 01.01. 15.12.13 01.12.13
MaterialDeforming technicAutomatic control technicAtmosphere and ventilation technic
2 01.02. 15.01. 01.01.
Energy technicGearMotive technicWelding and cutting technicEnvironment technic
SEMICON KOREA, COEX, 30.01.-01.02.2014
3 01.03. 15.02. 01.02.
Measuring and test technicSensor technicDigital Fabrication, CAD, Simulation3D-Simulation, 3D-ImagePump technic
Automation World, COEX, 13.-16.03.VISION SHOW, COEX, 13.-16.03.
4 01.04. 15.03. 01.03.
Precision toolsCasting and ForgingGrinding production
SIMTOS 2014, KINTEX, 09.-13.04.KPCA SHOW, KINTEX, 22.-24.04.KIEP SHOW, KINTEX, 22.-24.04.
5 01.05. 15.04. 01.04.
MaterialDeforming technicAutomatic control technicAtmosphere and ventilation technic
KOFAS 2014, CECO, 22.-25.05.
6 01.06. 15.05. 01.05.
Energy technicGearMotive technicWelding and cutting technicEnvironment technic
KOREA PACK, KINTEX, 10.-13.06.KOREA CHAM, KINTEX, 10.-13.06.
7 01.07. 15.06. 01.06.
Measuring and test technicSensor technicDigital fabrication, CAD, Simulation3D-Simulation, 3D-ImagePump technic
KISS 2014, COEX
8 01.08. 15.07. 01.07.Precision toolsCasting and forgingGrinding production
9 01.09. 15.08. 01.08.
MaterialDeforming technicAutomatic control technicAtmosphere and ventilation technic
KOFAS 2014, KINTEX
10 01.10. 16.09. 01.09.
Energy technicGearMotive technicWelding and cutting technicEnvironment technic
IMAC 2014, KINTEXENTECH 2014, BEXCOKIMEX 2014, CECO
11 01.11. 15.10. 01.10.
Measuring and test technicSensor technicDigital fabrication, CAD, Simulation3D-Simulation, 3D-ImagePump technic
DAMEX 2014, EXCOWELDING KOREA 2014, CECOOffshore 2014, BEXCO
12 01.12. 15.11. 01.11.Precision toolsCasting and forgingGrinding production
mm_industrial_englisch_140219.indd 33mm_industrial_englisch_140219.indd 33 19.02.2014 07:58:2019.02.2014 07:58:20
34 Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India
IndiaSix issues and worlwide e-paper in 2013
Official showdaily at IMTEX & EMO
Global partnership of IMTMA, Gardner & Vogel
V. ANBU
CEO,Indian Machine Tools Manufactuerers‘ Association (IMTMA)
IMTMA Launches New Magazine
Indian Machine ToolsGo Global
Print Digital Events Services No. 1 · January 2013 · Volume 1 · www.modernmanufacturing.in
INDIAMODERN MANUFACTURING
The official magazine of Indian Machine Tool Manufacturers‘ Association
Partnered by:
MM India
Characteristics:A bi-monthly publication, brought to you in partnership by IMTMA and two ofthe most respected media houses from USA and Europe targeted towards theusers of technology and with a clear vision to be the enabler of success in themachine tool, manufacturing sector in India. MMI provides current knowledgeand information in areas of production, design, automation and maintenance.Management topics, economic news, interviews and trends round up the offe-ring for managers, specialists and buyers in the Indian industry.
Circulation: 15,000 copies
Frequency: 6 times a yearPlace of publication: Bangalore/IndiaPublisher: Vogel Business Media India Pvt. Ltd.
Advisory Board :Mr. Jamshyd N. Godrej
Chairman and Managing Director,Godrej & Boyce Manufacturing Company Limited
Mr. Vikram KirloskarVice Chairman - Toyota Kirloskar Auto Parts Pvt Ltd
Mr. A. K. TanejaManaging Director & CEO, Shriram Pistons & Rings Ltd.
Mr. Vikram Sirur – President (IMTMA)Chairman, Miven Machine Tools LimitedMr. L Krishnan – Vice President (IMTMA)
Managing Director, TaeguTec India Private LimitedMr. Shailesh Sheth
Corporate Strategy AdvisorMr. Shrinivas G. Shirgurkar
Managing Director, Ace Designers LimitedMr. C. P. Rangachar
Managing Director, Yuken India Limited
About Gardner Business Media:Founded in 1928, Gardner Business Media is the premier publisher for themanufacturing sector in North America. To this day, Modern Machine Shopis recognized as the premier publication in the English speaking world as thepremium publication. Since then, Gardner has built a niche with eight titles fo-cused on one area: manufacturing. Their brands strive to use media - be it printpublications, websites, electronic devices, newsletters, webinars, research orin person events - to show best practices and practical, how-to information toexplain technology and help our customers be competitive in today’s challengingenvironment.
About IMTMA:Established in 1946 for promotional support, Indian Machine Tool Manufacturers‘Association (IMTMA) is an apex body of machine tool industry in India. IMTMAhas a membership of 450 companies from both the public and private sectors,manufacturing a wide range of metal-cutting and metalforming machines,accessories, cutting tools and other ancillary equipments. IMTMA promotesand supports the industry through a host of activities directed towards marketdevelopment, technology upgradation, training and linkage with overseas ma-nufacturers and so on, IMTMA has over the years transformed itself to focuson issues of productivity, quality, technology, new product development, design,customer satisfaction, etc. for enhancing competitiveness of the industry inboth domestic an overseas markets. IMTMA plays a key role in the gowth anddevelopment of this industry and it is the reference point for the industry. IMTMAorganises the prestigious IMTEX and Tooltech exhibitions, where both Indianand overseas manufacturers showcase their best metal working machines,equipment and tools
Circulation Details
Department
Industry
Electrical /Electronics
6 %
Marketing / Sales12 %
Aerospace3 %
Production30 %
Auto Components15 %
Quality10 %
Power12 %
Purchase12 %
Energy9 % Auto / Heavy
9 %
Auto /Light12 %
CNC Services1 %
Government /Defence6 %
MedicalEng9 %
IndustrialPlants /Railways
2 %
Heavy /Earth Moving
5 %
Heavy / Farm3 %
Education1 %
WhiteGoods7 %
Tools /Castings7 %
Marine1 %
R & D9 %
Promotion9 %
Management9 %
Others9 %
Switzerland
mm_industrial_englisch_140219.indd 34mm_industrial_englisch_140219.indd 34 19.02.2014 07:58:2019.02.2014 07:58:20
Switzerland(SMM)
Switzerland(MSM)
SMM/MSM(Online)
Austria Poland CzechRepublic
Hungary Ukraine Turkey China Thailand MMElectronics
Korea IndonesiaOnline
India 35
MM India
Rate Card no. 002, valid from 01/01/2014Scope: Industry
Size of magazine: 210 x 297 mm (width x height), DIN A 4
Type Area: 190 mm x 270 mm, 4 columns each 46 mm wide
Printing material, printing, binding:Digital printing material (please see on page 3),offset printing, perfect binding
Advertising fractional sizes and rates: (1c=4c)
Format Width x Hight (in mm) EUR €
Full page 190 x 270 + 5mm bleed 1,960.–
Inside Front Cover 190 x 270 + 5mm bleed 2,400.–
Inside Back Cover 190 x 270 + 5mm bleed 2,400.–
Back Cover 190 x 270 + 5mm bleed 2,600.–
Fanfold - front 420 x 297 + 5mm bleed 3,400.–
Fanfold - back 420 x 297 + 5mm bleed 3,000.–
Opp. Editorial Page 190 x 270 + 5mm bleed 2,270.–
Junior Page 136 x 190 1,500.–
1/2 Page 190 x 13494 x 270
1,200.–
1/3 Page 190 x 8862 x 270
1,000.–
1/4 Page 190 x 6694 x 13446 x 270
720.–
Colour charges:none up to full colour, according to the European colour pattern
Extra charge for special positions.
Title: Show Daily at IMTEX 2014
Format: Tabloid
Distribution Dates: 23.-28.01.2014
Ad close date: 08.01.2014
Distribution: free, at IMTEX 2014
Format Width x Hight (in mm) EUR €
Back Cover 251 x 368 1.490.–
Inside Front Cover 251 x 368 1.240.–
Inside Back cover 251 x 368 990.–
Full Page 251 x 368 830.–
1/2 Page 251 x 176 495.–
Junior Page 200 x 270 580.–
1/3 Page 200 x 120 370.–
Strip (1st Page) 251 x 45 660.–
Issues Dates EditorialDeadline
ManufacturingFocus
Process& Systems
IndustryUpdate
TechnologyUpdate Fairs / Events
anni-versaryissue
JAN
PD15.01.14
10.01. Automation &Robotics
AdditiveManufacturing Metals & Mining Welding
EMAT, 04.-07.01.2014, PuneInternational Seminar on Forming technology,22.01.2014, BangaloreIMTEX forming 2014, 23.-28.01.2014, Bangalore
AD05.01.14
MAR
PD15.03.14
10.03. AutomotiveManufacturing
EDMMilling machines Cutting Tools
Renewable energyMachining centers
Automotive Testing Expo India, 19.-21.03.14, ChennaiSIMTOS, 04.-13.04.14, KoreaDieMould IndiaMumbai, 19.-22.04.14, BEC, MumbaiAD
05.03.14
MAY
PD15.05.14
10.05. SustainableManufacturing
Industrial DesignHydraulics &Pneumatics
Foundry & ForgingSafety & SecurityLaser cutting
“VISION 2020” Regional Conclave, May 14, RajkotCIMES 2014, 18.-22.06.14, Beijing, ChinaAcmee 2014, 19.-23.06.14, ChennaiAD
05.05.14
JUL
PD15.07.14
10.07. AerospaceMachining
GrindingTitaniummachining
Steel & PowerIndustrial BearingsCNC MachineControls
MMS 2014, Delhi, Ahmedabad, etc.AMTEX 2014, 25.-28.07.14, DelhiAD
05.07.14
SEP
PD28.08.14
23.08. Nuclear Drive systems High speedmachining
Material HandlingMotion Control
IMEX 2014, 04.-06.09.14, New DelhiIMTS 2014, 08.-13.09.14, ChicagoEuroBLECH 2014, 21.-25.10.14, Hannover, GermanyWelding & Cutting India, 28.-30.10.14, New DelhiJIMTOF 2014, 30.10.-04.11.14, Japan
AD18.08.14
NOV
PD15.11.14
10.11. MedicalMachining
CAD/CAMCoolants &Lubricants
ConstructionTurning centersDie & Mold
14th “VISION 2020” Conclave for CEOs and “UDAAN”Members of Indian Machine Tool Industry,14.-16.11.14, MahabalipuramMachine Tool Indonesia, 03.-06.12.14, IndonesiaPD
05.11.14
The official magazine of Indian Machine Tool Manufacturers‘ Association
mm_industrial_englisch_140219.indd 35mm_industrial_englisch_140219.indd 35 19.02.2014 07:58:2419.02.2014 07:58:24
Europe: Company Phone Fax E-mail
Austria Technik & Medien Verlagsges. mbH +43-1-876837913 +43-1-876837915 [email protected]
Czech Republic/Slovakia MM publishing s.r.o. (Ltd.) +420-2-22365329 +420-2-67216440 [email protected]
France DEF & COMMUNICATION +33-1-47307181 +33-1-47300189 [email protected]
Germany Vogel Business Media +49-931-418-2686 +49-931-418-2022 [email protected]
Great Britain/Ireland VOGEL Europublishing UK Office +44-20-3371 7420 +44-20-3371 9021 [email protected]
Hungary MediaCity Magyarország Kft. +36-06-1-445 3024 +36-1-225-23 99 [email protected]
Italy Ferdinando Salaris +39-33-88285021 +39-0233294887 [email protected]
Poland Raven Media sp. z o.o. +48-71 78 23 194 +48-71 78 23 184 [email protected]
Switzerland Vogel Business Media AG +41-44 722 77 78 +41-44 720 1078 [email protected]
Netherlands/Belgium/Lux SIPAS International Media Representatives +31-299-671303 +31-299-671500 [email protected]
Turkey “GLOBUS“ Dünya Basinevi +90-212-440 2866 +90-212-355 3552 [email protected]
North America: USA/Canada VOGEL Europublishing Inc. +1-925-8031265 +1-925-8031266 [email protected]
Asia: China Beijing Jigong Vogel Media +86-10-63326090 +86-10-63326099 [email protected] Advertising Co., Ltd.
Taiwan J&M MEDIA CORPORATION +886-4 2296-5959 +886-4 2296-9730 [email protected], [email protected]
Thailand Green World Media (Thailand) Co. Ltd. +66-2-7311191 +66-2-7698120 [email protected]
Korea MM Korea Co., Ltd. +82 2 2052 3551 +82 2 2052 3552 [email protected], [email protected], [email protected]
Japan JAC, Inc. +81-3-32614591 +81-3-32616126 [email protected]
You choose the channel, we provide the knowledgeUsers searching for qualified professional know-how will quickly and efficiently find the required information on our innovative media platforms. Vogel Business Media is a leading publisher of professional media and provides the network for people and the media. Printed or digital media or events – many different ways of knowledge transfer are available, and you chose the approach that is most convenient and efficient for you – professional maga-zines, information services, online media, mobile offerings, apps, specialist books or our wide range of services and events. Get ready!
PRINT | dIGITal | EVENTS | SERVICES
www.vogel.de
GEBRAUCHTWAGEN
PRAXIS
Unternehmen. Verantwortung. Gesellschaft.CSR MAGAZIN