mechel company information

Mechel company information ................................................................................. 8

long and flat steel products manufacturing plants ........................................................................................................8

Long products ...................................................................................................................... 10

Long products from corrosion resisting, tool, alloyed and high-speed steel ................................................10Sections ..................................................................................................................................................................................................14

Special and railway sections ..........................................................................................................................................14Flange beams including sections for rail car building ................................................................................14Railway rails including rails for underground lines ....................................................................................... 16

General purpose long products ............................................................................................................................................... 18Hot rolled round products in coils .............................................................................................................................18Hot rolled round bars ........................................................................................................................................................24Hot rolled square bars ......................................................................................................................................................28Hot rolled hexagonal bars ..............................................................................................................................................30Hot rolled strip ....................................................................................................................................................................... 32Hot rolled strip for springs .............................................................................................................................................36

Products for reinforcement of concrete ............................................................................................................................. 38Semi finished products ................................................................................................................................................................40

Flat products ........................................................................................................................42

Hot rolled flat products from corrosion resisting steel and alloys ......................................................................42Cold rolled flat products from corrosion resisting steel and alloys ....................................................................42Hot rolled flat products (excluding rolled flat products from corrosion resisting steel) ........................44Hot rolled flat products from creep resisting difficult-to-form alloys ...............................................................46

Sales of products ............................................................................................................48

Manufacturing plants ....................................................................................................................................................................48Sales departments ..........................................................................................................................................................................48

12

3

4

TABLE OF CONTENTS

8

echel group founded in 2003, is one of the leading Russian companies in the mining and metallurgical industries. It unites producers of coal, iron

ore concentrate, ferroalloys, steel, rolled products, high-conversion products, heat and electricity. Mechel’s business is represented by industrial enterprises in 11 regions of Russia and abroad. Mechel owns three commercial ports and its own transport operator. Mechel’s products are sold both in the Russian and international markets.

The company’s activities in the metallurgical field include production and sale of billets, long products made of carbon and special steel, flat products from carbon and stain-less steel, deep - processing metallurgical products, including stamped and open die forgings. Also, within these product groups, the company can produce various grades of steel in accordance with the needs of spe-cific consumers.

M

INFORMATION ABOUT MECHEL COMPANY AND THE PLANTS PRODUCING LONG AND FLAT PRODUCTS

MECHEL’S ASSETS

1CHELYABINSK METALLURGICAL PLANTCHELYABINSK, CHELYABINSK REGION

Chelyabinsk Metallurgical Plant (CMP PAO) pro-duces a wide range of steel products: pig iron, semi-finished steel products for further process-ing, long and flat products from carbon, structur-al, tool and corrosion-resisting steel grades, flat products from alloys.

CMP PAO is primarily focused on production of rolled steel products ranging from wire rod 6,5-8,0 mm in diameter to ribbed reinforcing steel bars of 40,00 mm in diameter; from rolled bars in structural steel in diameter of 12,0-23,0 mm in coils to long products for tube rolling mills and machine building works in diameter of 80,0-190,0 mm, as well as square billet of 98,0-350,0 mm.

CMP PAO is the main enterprise of Mechel pro-ducing flat products. The plant produces:

• sheets and plates from corrosion resisting (stain-less) steel: hot-rolled plates in thickness of 3,5-100,0 mm thick, cold-rolled sheets in thickness of 0,3-3,0 mm;

• cold rolled sheets in thickness of 0,8-3,0 mm and hot rolled plates in thickness of 4,0-14,0 mm from alloy grade ХН78T(ЭИ435);

• hot-rolled sheets and plates from unalloyed and structural steel grades in thickness of 2,5-100,0 mm;

• plates of high-strength steel and bridge steel in thickness of 6,0-20,0 mm (classes: 325, 345, 390, steel grades 09Г2С, 10ХСНД, 16Г2АФ);

• hot rolled plate from alloy 06ХН28MДТ (ЭИ943) in thickness of 6,0-20,0 mm, in thickness of 8,0-25,0 mm from alloy ЧС129-ИД;

9

• cold-rolled sheets and plates in thick-ness of 1.0-3.0 mm from alloy grade 06ХН28MДТ(ЭИ943).

Rolling facilities of CMP PAO are being ac-tively modernized. In 2010 a new complex for the production of quality and stainless steel electric-furnace melting shop No. 6 was launched which allows to expand brand range of sheet products and once the rolls processing facilities are upgraded to mas-ter production of new types of flat stainless steel stock, which is not produced now in Russia. The sheet leveller of the rolling shop No. 4, which was put into operation in 2010, enables the plant to produce rolled prod-ucts with a flatness level exceeding the re-quirements of domestic and international standards. These products may then be la-ser-cut into minimal-tolerance parts using laser cutters for thick flat rolls.

Revamping of the rolling shop No. 3 has been completed with the installation of the universal rail and section mill (URSM) with a production capacity up to 1,1 million tonnes per year. The new CMP mill is capable of pro-ducing high-quality railway rails up to 100 meters long using advanced technologies of rolling, quenching, straightening, finish-ing and quality control.

Results of tests carried out on the Test Loop of JSC VNIIZHT (Railway Research Institute) confirm that CMP’s products comply with the best world analogues, and even surpass them on several counts. URSM also produc-es various types of sections (beams, chan-nels, angles, etc.), which are in demand in the construction industry.

Chelyabinsk Metallurgical Plant is one of the few enterprises in the country that has the right to assign its own index to steel grades - ChS (Chelyabinsk Steel). The company’s quality management system is certified for compliance with the International Standard ISO 9001:2015.

2

3

IZHSTАL IZHEVSK, UDMURT REPUBLIC

Izhstal PAO occupies a leading position among domestic producers of special grades of steel and stainless steel products. The range of hard-ware products manufactured by the company includes rolled gauged steel bars, high-preci-sion sections and cold-rolled strip. The compa-ny is a leading manufacturer of high-precision sections in Russia.

In 2019 Izhstal mastered production of conduc-tor rails used for construction and moderniza-tion of underground lines both in Russia and CIS countries.

СЕРТИФИКАТ

Орган по сертификации общества TÜV SÜD Management Service GmbH

удостоверяет, что предприятие

Публичное акционерное общество «Ижсталь»

ул. Новоажимова, 6 426006 г. Ижевск, Удмуртская Республика

Российская Федерация

в следующей области действия

Разработка, производство и сбыт стали в слитках, непрерывнолитой заготовки, горячекатаной, холоднокатаной,

калиброванной стали, стальных фасонных профилей и стали со специальной отделкой поверхности

внедрило и применяет систему менеджмента качества.

В результате аудита, номер отчёта 70756474 получено подтверждение, что требования

ISO 9001:2015

выполнены. Данный сертификат действителен с 22.08.2018 г. по 15.10.2021 г.

Регистрационный номер сертификата: 12 100 37118 TMS.

Product Compliance Management

Мюнхен, 28.08.2018 г.

BELORETSK METALLURGICAL PLANT BELORETSK, BASHKORTOSTAN REPUBLIC

Beloretsk Metallurgical Plant AO (BMP AO) is part of the Mechel Group and is one of the main manufacturers of hardware in the Russian Federation. The range of products includes wire rod and steel wire made of high-qual-ity grades of steel: carbon steel, alloyed and stainless steel, steel ropes of various designs without coating, as well as galvanized and polymer-coated, tape of various sizes and sections, nails.

The company produces over 800 different grades of steel, including struc-tural, stainless, tool, high-speed, bearing and othersspecial steels and alloys. Izhstal has a certificate of compliance of the quality management system with the requirements of the international standard ISO 9001: 2015.

The plant occupies one of the leading positions in Russia in the production of STAP, high-strength-wire with a diameter of 4,0-5,0 mm, wire for rein-forcing of concrete structures (Вр1), spring wire, and it is also the only enterprise in Russia that produces micro-wire with a diameter up to 0,009 mm, alloyed wire, ball-bearing wire and wire hot-dipped in oil.

The plant’s products are in demand in almost all branches of the fuel and energy industry, ma-chine-building, construction, as well as at the enterprises of the military-industrial complex. BMK has a certificate of quality management compliance with the International Standard ISO 9001:2015.

2 LONG PRODUCTS FROM CORROSION RESISTING, TOOL, ALLOYED AND HIGH-SPEED STEEL

10

LONG PRODUCTS

11

PRODUCTPROFILE

Standards for product Class, group Steel grade Standards for chemical composition

Manufacturing plant Minimal lot

Size, mm Length, m

Hot rolled round bar

Ø 10; 10.5; 11; 11.5;12; 12,5; 13; 13,5;14; 14,5; 15; 15,5;16; 16,5; 17; 17,5;18; 18,5; 19; 19,5;20; 20,5; 21; 21,5;22; 22,5; 23; 23,5;24; 24,5; 25; 26;27; 28; 29; 30; 31;32; 33; 34; 35; 36;37; 38; 40; 41; 42;43; 45; 46; 47; 48; 50; 52

3,0–6,0

GOST 2590-2006; GOST 5949-2018

group 2ГП, 3ГП

08Х13; 12Х13; 12Х17; 20Х13; 30Х13;40Х13; 08Х18Н10Т; 12Х18Н9; 12Х18Н9Т;

12Х18Н10Т; 10Х17Н13М2Т; 14Х17Н2and others

GOST 5632-2014

IZHSTAL

no less, than 3 t; high-speed steel grades no less, than 1 t

GOST 2590-2006; GOST 5950-2000

group 2ГП, 3ГП,4ГП

Х; ХВГ; ХВ4Ф; Х12МФ; Х12Ф1; Х6ВФ; 4Х5МФС; 5ХВ2СФ; 5ХНВ; 6ХС; 7Х3; 8ХФ;

9ХС; 9ХФ; 9ХФГ; ХВСГФ and othersGOST 5950-2000

GOST 2590-2006; GOST 19265-73 – Р9; Р6М5; Р6АМ5; Р9К5; Р6М5К5;

Р6М5Ф3; Р9М4К8; Р18 GOST 19265-73

according to metallurgical specifications, technical

specifications, developed based on ASTM, DIN, EN, BS

–AISI 304; 316; 416; 420; 1.4301

and othersS5; S7; O1; A2; 1.2510 and othersM2; HS6–5–C2; 1.3343 and others



Ø 53; 54; 55; 56; 58; 60; 62; 63; 65; 70; 72; 75; 80; 85; 90; 95; 100; 105; 110;115; 120; 125; 130;135; 140; 150; 160; 170; 180

GOST 2590-2006; GOST 5949-2018

group 2ГП, 3ГП

08Х13; 12Х13; 12Х17; 20Х13; 30Х13;40Х13; 08Х18Н10Т; 12Х18Н9; 12Х18Н9Т;

12Х18Н10Т; 10Х17Н13М2Т; 14Х17Н2and others

GOST 5632-2014

no less, than 2,8 t; high-speed steel grades no less, than 0,5 t

GOST 2590-2006; GOST 5950-2000

group 2ГП, 3ГП,4ГП

Х; ХВГ; ХВ4Ф; Х12МФ; Х12Ф1; Х6ВФ; 4Х5МФС; 5ХВ2СФ; 5ХНВ; 6ХС; 7Х3; 8ХФ;

9ХС; 9ХФ; 9ХФГ; ХВСГФ and othersGOST 5950–2000

GOST 2590-2006; GOST 19265-73 – Р9; Р6М5; Р6АМ5; Р9К5

(sizes within 100 mm) GOST 19265–73



–

AISI 304; 316; 416; 420; 1.4301 and others

S5; S7; O1; A2; 1.2510 and others M2; HS6–5–C2; 1.3343 and others

(sizes within 100 mm)



Hot rolled square bar

130; 135; 140; 145; 150; 155; 160; 165;170; 175; 180;185; 190; 195;200; 205; 210;215; 220; 225;230; 235; 245;250

1,0–4,0 TU 14-1-4492-2019 –08Х13; 12Х13; 12Х17; 20Х13; 30Х13;

40Х13; 08Х18Н10Т; 12Х18Н9; 12Х18Н9Т;12Х18Н10Т; 14Х17Н2 and others

GOST 5632–2014 no less, than 3 t

HTTPS://WWW.MECHEL.RU/PRODUCTION/METALLURGY/ROLLED_SHEET/

2 LONG PRODUCTS FROM CORROSION RESISTING, TOOL, ALLOYED AND HIGH-SPEED STEEL

12

LONG PRODUCTS

13

PRODUCTPROFILE

Standards for product Class, group Steel grade Standards for chemical composition


Size, mm Length, m

Hot rolled hexagonal bar

12; 13; 14; 15; 16; 17;18; 19; 20; 21; 22; 24; 26; 27; 28;30; 32; 34; 36;38; 40; 41

3,0–6,0

GOST 2879-2006; GOST 5949-2018 group 2ГП, 3ГП

08Х13; 12Х13; 12Х17; 20Х13;30Х13; 40Х13; 08Х18Н10T; 12Х18Н9;

12Х18Н9T; 12Х18Н10T; 14Х17Н2 and othersGOST 5632-2014

IZHSTAL

no less, than 3 taccording to metallurgical specifications, technical specifications, developed based onASTM, DIN, EN, BS

– AISI 304; 316; 416; 420; 1.4301



GOST 103-2006; GOST 5949-2018 group 2ГП, 3ГП 20Х13; 30Х13; 40Х13; 12Х18Н10T and others GOST 5632-2014 no less, than 1 t

Hot-rolled strip

(width x thickness) 20x12; 22x12; 25x5; 6; 7; 8; 9; 10; 11;25x12; 14; 16; 18; 2026x6; 7; 8; 13; 2027x5; 8; 14; 15; 1828x7; 8; 9; 10; 11; 1228x13; 14; 16; 18; 2030x5; 6; 7; 8; 9; 10; 1230x14; 16; 18; 20; 2232x5; 6; 7; 8; 10; 1232x18; 22; 2434x10; 12; 15; 2235x5; 5,5; 8; 10; 1235x14; 16; 18; 2036x5; 6; 6,5; 7; 8; 936x10; 11; 12; 14; 1636x18; 20; 22

4,0–6,0 GOST 4405-75; GOST 19265-73 - Р6M5 GOST 19265-73

no less, than 0,5 t

Hot-rolled strip

(width x thickness) 38x6; 8; 20; 2240x5; 6; 7; 8; 9; 1040x11; 12; 14; 16; 1840x20; 22; 25; 2841x1042x5; 6; 9; 11; 12; 14; 1642x18; 20; 22; 24; 2643x17; 44x1245x5; 6; 7; 8; 9; 10; 1245x14; 16; 18; 20; 2246x6; 947x7; 11; 17; 1850x5; 6; 7; 8; 9; 10; 1150x12; 14; 16; 18; 20; 2252x12; 53x555x5; 6; 7; 7,5; 8; 9; 1055х14; 18; 2056x5; 6; 7; 8; 9; 10; 1156х12; 14; 16; 1858x11; 1460x5; 6; 7; 8; 8,5; 9; 1060х11; 12; 13; 14; 16; 1862x7; 11; 1565x5; 6; 7; 8; 9; 10; 1165х12; 14; 1670x5; 6; 7; 8; 9; 10; 1170х12; 13; 14; 16; 1880х5; 6; 7; 8; 9; 10; 1180х12; 13; 14; 15; 16

no less, than 0,5 t

Wire rod5,5–10,0 in coils of mass

up to 2100 kg

GOST 2590-2006; GOST 5949-75 –

12Х18Н10T and othersGOST 5632-2014

BELORETSKMETALLURGICALPLANT

Approved at order receipt

6,5; 8,0 TU 14-1-1534-76 08Х18Н10; 12Х18Н10T; 12Х18Н9


2

14 15

SECTIONS

SPECIAL AND RAILWAY SECTIONS

FLANGE BEAMS INCLUDING SECTIONS FOR RAIL CAR BUILDING

PRODUCT SKETCHPROFILE

Standards for product Steel grade Standardsfor chemical composition Manufacturing plant Minimal lot

Type Length, m

H-BEAM

16Б1, 16Б2, 18Б1, 18Б2, 20Б1, 20Ш1, 20К1, 20К2, 25Б1, 25Б2, 25К1, 25К2; 25Ш1, 30Ш1 30Ш2, 30Б1, 30Б2, 30К1, 30К2, 35Б1, 35Б2, 35Ш1, 35Ш2, 40Б1, 40Б2, 40Ш1, 40Ш2, 45Б1, 45Б2, 50Б1, 50Б2, 55Б1, 55Б2, 60Б1, 60Б2, 25К3, 30К4, 50В3

6,0-24,5

GOST R 57837-2017С355, Ст3сп5, С345, С255 325-09Г2С, 345-09Г2С, 375-09Г2С, 390-09Г2С

GOST 535–2005;GOST 19281–2014GOST 27772-2015

CHELYABINSKMETALLURGICALPLANT


IPB (HEB) 160, IPB (HEB) 180, IPB (HEB) 200, IPB (HEB) 220, IPB (HEB) 240, IPB (HEB) 300

DIN 1025-2: 1995

S235JR+ARS275JR+ARS355J2+AR

DIN EN 10025-2: 2005IPBl (HEA) 160, IPBl (HEA) 180, IPBl (HEA) 200, IPBl (HEA) 220, IPBl (HEA) 240, IPBl (HEA) 300

DIN 1025-3: 1994

IPE 160, IPE 180, IPE 200, IPE 220, IPE 240, IPE 300 DIN 1025-5: 1994

Mine working support section

СВП 22CВП 27 6,0–24,5 GOST 18662-83 Ст5сп1, Ст5сп2 GOST 535–2005



LONG PRODUCTS

SPECIAL SECTIONS

PRODUCT SKETCHPROFILE

Standards for product Steel grade Standardsfor chemical composition Manufacturing plant Minimal lot

Type Length, m

Z-profile Z310 6,0-24,5 GOST 5267.0-90 GOST 5267.3-90

325-09Г2С, 345-09Г2С, 375-09Г2С, 390-09Г2С, 345-12Г2ФД, 375-12Г2ФД, 390-12Г2ФД

GOST 19281-2014



Section of car post ПВС 6,0-24,5 GOST 5267.0-90 GOST 5267.6-90

325-09Г2С, 345-09Г2С, 375-09Г2С, 390-09Г2С, 345-12Г2ФД, 375-12Г2ФД, 390-12Г2ФД

GOST 19281-2014

Hot-rolled steelunequal leg angle 160x100x10 6,0-24,5 GOST 8510-86 Ст3сп5, 345-09Г2С, 12Г2ФД GOST 535-2005,

GOST 19281-2014

Channel18У, 20У, 22У, 24У, 27У, 30У,

30П6,0-24,5 GOST 8240-97

С255, С345, С355, Ст3, 265-09Г2С 325-09Г2С, 345-09Г2С, 375-09Г2С, 390-09Г2С,

GOST 27772-2015, GOST 535-2005, GOST 19281-2014

SECTIONS FOR RAIL CAR BUILDING

* Products for railway application manufactured by Urals Stampings Plant including axes, gear weels, tyres are presented in the separate catalogue.


RAILS

2

16 17

PROFILEs Rail type Standards for product Steel grade Category Manufacturing plant Minimal lot

Wide gauge rails for general and non-general purpose railways

Р65: up to 100 m.GOST R 51685-2013 and TU 0921-231-01124323-2014 with a conformance certificate

К76Ф

ДТ350СС

CHELYABINSK METALLURGICAL PLANT


Р65: up to 100 m.GOST R 51685-2013 and TU 0921-231-01124323-2014 with a conformance certificate

ДТ350

Р65: up to 100 m. Р50: up to 100 m.

GOST R 51685-2013 with a conformance certificate HT260

60Е1, 60Е2: up to 100 m. EN 13674-1: 2011+A1: 2017with a conformance certificate

R260

R350HT

54Е1*: up to 100 m. EN 13674-1: 2011+A1: 0 2017R260R350HT

Wide gauge rails for technological tracks and industrial enterprises

РП65: up to 100 m.GOST R 51045-2014

К76Ф,К76АФ,К90АФ

ДТ350НТ260

РП50: up to 100 m.ДТ350НТ260

Wide gauge rails for technological tracks and industrial enterprises

Р65 (for I-п and II-п track category): up to 100 m.

TU 14-2Р-475-2013К76Ф,К76АФ,К90АФ

ДТ350

РП65: up to 100 m.ДТ350НТ260

РП50: up to 100 m.ДТ350НТ260

Tongue rails ОР65 GOST R 55820-2013 with a conformance certificate К73Ф НТ260

RAILSRAILWAY RAILS

RAILS FOR UNDERGROUND LINES AND URBAN RAIL TRANSPORT

Wide gauge rails for general and non-general purpose railways

Р65: up to 100 м. GOST R 51685-2013, TU 0921-231-01124323-2014with a conformance certificate

К76Ф

ДТ350CHELYABINSK METALLURGICAL PLANT


Р65: up to 100 м.Р50: up to 100 м. GOST R 51685-2013 with a conformance certificate HT260

Conductor rail for underground car power supply РК TU 14-550-81-2018

with a conformance certificate10 IZHSTAL

Grooved rail РТ62* GOST/TUCHELYABINSK METALLURGICAL PLANT

Conventional symbols: ДT - differentially-hardened, НT - unhardened, CC – rails for combined high-speed traffic. *In the process of development and certification. Upon request the product can be produced according some other technical parameters.


2 HOT-ROLLED ROUND PRODUCTS IN COILS

18

GENERAL PURPOSE LONG PRODUCTS

19

PRODUCTPROFILE Standards

for product Class, group Steel gradeStandards

for chemical composition

Manufacturing plant Minimal lotSize, mm Mass, kg

Reinforcing bar Ø 6; 8, 10(coils) coils

of mass up to 850 kg

TU 14-1-5282-94TU 14-1-5283-94

A-I, A-II, A-IIIplain and ribbed VO (single stage cooling)

Class А-I: А240С;Ст3сп(пс)2; Ст3сп(пс)3 GOST 380-2005


65 t

Wire rod Ø 6,5; 7,0, 8,0; 9,0 Ст0; Ст1сп(пс); Ст2сп(пс); Ст3сп(пс) GOST 34028-2016

Wire rod

Ø 6,5; 7; 7,5; 8; 8,5;9; 9,5; 10; 10,5; 11;11,5; 12; 12,5; 13;13,5; 14; 14,5; 15;15,5; 16; 16,5; 17;17,5; 18; 18,5; 19;19,5; 20; 20,5; 21;21,5; 22; 22,5; 23

220–450

GOST 2590–2006;GOST 535–2005 Ст3сп; Ст5сп and others GOST 380–2005

IZHSTAL no less, than 3 t

GOST 2590–2006;GOST 801–78

group OX ШХ15; ШХ15СГ; ШХ15–В GOST 801–78

GOST 2590–2006;GOST 1435–99

group 2ГП, 3ГП У7(А); У8(А); У9(А); У10(А); У12(А) GOST 1435–99

GOST 2590–2006; GOST 4543–2016

group 2, 3 15Г; 20Г; 25Г; 30Г; 35Г; 40Г; 45Г; 50Г; 10Г2; 30Г2; 35Г2; 40Г2; 45Г2; 50Г2; 15Х; 20Х; 30Х; 35Х; 40Х; 45Х; 50Х; 15ХФ; 30ХРА; 38Х; 20ХН; 40ХФА; 18ХГT; 20ХГР; 20ХГСА; 25ХГСА; 30ХГСА; 35ХГСА;25ХГT; 30ХГT; 33ХС; 38ХС; 40ХС; 15ХM; 20ХM; 30ХM; 35ХM; 30ХMА; 30ХНЗMФА; 38ХГНM; 20ХНР; 38Х2MЮА; 40ХНMФА; 12ХН2; 12ХН3А; 12Х2Н4А; 20Х2Н4А; 30ХНЗА; 12ХР; 20ХН; 40ХН; 45ХН; 50ХН; 20ХГНTР; 25Х2Н4ВА; 30ХН2ВА; 45ХН2MФА and others

GOST 4543–2016

GOST 2590–2006;GOST 1050–2013

group 2ГП, 3ГП 10; 15; 20; 25; 30; 35;40; 45; 50; 55; 60

GOST 1050–2013


20 21

HOT-ROLLED ROUND PRODUCTS IN COILS

PRODUCTPROFILE

Standards for product Class, group Steel gradeStandards



Wire rod

Ø 6,5; 7; 7,5; 8; 8,5;9; 9,5; 10; 10,5; 11;11,5; 12; 12,5; 13;13,5; 14; 14,5; 15;15,5; 16; 16,5; 17;17,5; 18; 18,5; 19;19,5; 20; 20,5; 21;21,5; 22; 22,5; 23

220–450

GOST 2590–2006;GOST 14959–2016

category 1, 1А, 1Б, 4, 4А, 4Б

65; 70; 75; 80; 50ХГ; 50ХГА; 51ХГА;55С2А; 60Г; 65Г; 70Г; 60С2А; 60С2Г;60С2ХФА; 65С2В; 70С2ХА; 70С3А;50ХГФА; 55С2 and others

GOST 14959–2016

IZHSTAL no less, than 3 tGOST 2590–2006;GOST 20072–74

sub-group а, б, в 12Х1МФ; 20Х3МВФ; 25Х1МФand others GOST 20072–74

GOST 2590–2006;GOST 10702–78

group 1ГП, 2ГП 10; 15; 20; 25; 30; 35; 40; 45; 50; 15Х; 20Х;30Х; 35Х; 40Х; 45Х; 40ХН; 16ХСН GOST 10702–2016

Wire rod

Ø 5,5–12,0

In coils of mass up to 2 300 kg

GOST 2590–2006;GOST 1050–2013

–

05КП–20КП; 10–60; 08ПС–20ПС GOST 1050–2013

BELORETSK METALLURGICAL PLANT


Ø 5,0–13,0GOST 30136-95;TU 14-1-5282-94; TU 14-1-5283-94

Ст0; Ст1; Ст2; Ст3 GOST 380–2005

Ø 5,0–11,0TU 14-1-5283-94

Ст0; Ст1; Ст2; Ст3 GOST 380–2005

Ø 5,5–10,0 GOST 2590–2006;GOST 1435–99

У7–У10 (У7А–У10А) GOST 1435–99

Ø 6,5–8,05,5–10,0

GOST 2590–2006;GOST 4543–71

30ХГСА; 40Х; 18ХГС; 18ХМА; 20Х GOST 4543–71

Ø 6,5 – 12,0 GOST 10702–78 М10–20 GOST 1050–2013

Ø 6,5–8,06,5–12,0

GOST 2590–2006;GOST 14959–79

60Г–70Г; 60–8551ХФА GOST 14959–79

Ø 6,5–13,0 TU 14–173–104–200310; 20; 12Г1Р; 20Г2Р; 30Г1Р;38ХГНМ; 38ХА TU 14–173–104–2003

Ø 6,5–8,0 TU 14–173–149–87 60С2ХА–Ш TU 14–173–149–87

Ø 5,5–9,0 TU 14–1–582–73 Св.08Г1С; Св.08 TU 14-1-582-73; GOST 2246-70

Ø 5,5; 6,5 TU 14-1-1881-76 70 «cord» TU 14-1-1881-76

2GENERAL PURPOSE LONG PRODUCTS


22 23

HOT-ROLLED ROUND PRODUCTS IN COILS

PRODUCTPROFILE




Wire rod

Ø 5,5–9,0

In coils of mass up to 2 300 kg

TU 14-1-4760-89rev. 3, rev. 5 – Св.08; Св.08А; Св.08ГА

and othersGOST 2246–70



Ø 5,5–12,0 TU 14-1-5317-95 rev. 3, 4, 5, 6 ВК; ПК; КК; ПД 60Г–70Г;

35–60; 65–85GOST 14959–79;TU 14–1–5317–95

Ø 5,5; 6,5; 8,0; 10,0

According to the customer’sSpecification

– Св.08А GOST 2246–70

Ø 5,5; 6,5; 8,0; 10,0 – 10ПС and others GOST 1050–2013

Ø 5,5–12,0 –SAE 1006; SAE 1008; SAE 1010;SAE 1010A; SAE 1011; SAE 1012;SAE 1015; SAE 1018; SAE 1018 х/в

ASTM A/A29M; ASTM A 510M

Ø 5,5; 6,5; 7,0; 8,0; 9,0; 10,0; 11,0; 13,0 – SWRH 62B; SWRH 72B SWRH 82B JIS G 3506

Ø 5,5; 6,5; 8,0; 10,0 – AISI 304 ASTM A 479

Ø 5,5; 6,5; 7,0; 8,0; 10,0; 11,0; 12,0 –SAE 1045; SAE 1055; SAE 1060;SAE 1065; SAE 1070; SAE 1075;SAE 1080

ASTM A29; A510

Ø 5,5; 6,5; 8,0; 10,0 – SWRH 42A JIS G 3506

Ø 5,5; 6,5; 8,0; 10,0; 12,0 – SWRH 27-SWRH 82A; SWRH6R-SWRH17R

JIS G 3506

Ø 5,5 – C4D EN 10016–2

Ø 5,5–12 – R ST37–2; R ST36–2 DIN 17100

Ø 5,5; 6,5; 8,0; 9,0; 10,0; 11,0; 12,0 – G3Si1 S1. SG2. SWRY11 EN ISO 14341

Ø 5,5; 6,0; 6,5; 7,0; 8,0; 9,0; 10,0; 11,0; 12,0 – C46D2; C56D2; C68D2; C72D2; C78D2; C82D2

EN 10016–4

Ø 5,5; 6,5; 8,0; 9,0; 10,0 – C3D1(D6); C7D; C15D2(D15) EN 10016–4

Ø 9,0; 10,0; 12,0 – 80Ф Protocol 173–124–2011

2GENERAL PURPOSE LONG PRODUCTS


HOT-ROLLED ROUND BARS

24 25

2PRODUCT

PROFILEStandards for product Class, group Steel grade

Standardsfor chemical composition

Manufacturing plant Minimal lotSize, mm Length, m


Ø 10; 12; 13; 14; 15; 16; 18; 19; 20; 21; 22 3,0–6,0 GOST 2590–2006 group 1ГП, 2ГП, 3ГП Ст1сп; Ст1пс; Ст2сп; Ст2пс; Ст3сп; Ст3пс;

Ст3Гсп; Ст3Гпс; Ст5сп (category 1–5) GOST 380–2005CHELYABINSKMETALLURGICALPLANT

5 t


Ø 10; 10,5; 11; 11,5;12; 12,5; 13; 13,5;14; 14,5; 15; 15,5;16; 16,5; 17; 17,5;18; 18,5; 19; 19,5;20; 20,5; 21; 21,5;22; 22,5; 23; 23,5;24; 24,5; 25; 26;27; 28; 29; 30; 31;32; 33; 34; 35; 36;37; 38; 40; 41; 42;43; 45; 46; 47; 48;50; 52

With heat treatment:3.0-6,0 Without heat treatment:3.0-11,7

GOST 2590–2006; GOST 535–2005 group 1ГП, 2ГП, 3ГП Ст3сп; Ст5сп and others GOST 380–2005


GOST 2590–2006;GOST 801–78 group ОХ ШХ15; ШХ15СГ; ШХ15–В GOST 801–78

GOST 2590–2006;GOST 1435–99 group 2ГП, 3ГП У7(А); У8(А); У9(А); У10(А); У12(А) GOST 1435–99

GOST 2590–2006;GOST 4543–2016 group 2ГП, 3ГП

15Г; 20Г; 25Г; 30Г; 35Г; 40Г; 45Г; 50Г;10Г2; 30Г2; 35Г2; 40Г2; 45Г2; 50Г2;15Х; 20Х; 30Х; 35Х; 40Х; 45Х ; 50Х;15ХФ; 30ХРА; 38Х; 20ХН; 40ХФА;18ХГТ; 20ХГР; 20ХГСА; 25ХГСА; 30ХГСА;35ХГСА; 25ХГТ; З0ХГТ; ЗЗХС; 38ХС;40ХС; 15ХМ; 20ХМ; 30ХМ; 35ХМ;0ХМА; 30ХНЗМФА; 38ХГНМ; 20ХНР;38Х2МЮА; 40ХНМФА; 12ХН2; 12ХН3А;12Х2Н4А; 20Х2Н4А; ЗОХНЗА;12ХР; 20ХН; 40ХН; 45ХН; 50ХН;20ХГНТР; 25Х2Н4ВА; 30ХН2ВА;45ХН2МФА and others

GOST 4543–2016

GOST 2590–2006;GOST 1050–2013 group 2ГП, 3ГП 10; 15; 20; 25; 30; 35; 40;

45; 50; 55; 60 GOST 1050–2013

GOST 2590–2006;GOST 20072–74 subgroup а, б, в 12Х1МФ; 20ХЗМВФ; 25Х1МФ and others GOST 20072–74



26 27

HOT-ROLLED ROUND BARS2

PRODUCTPROFILE




Size, mm Length, m

Hot-rolled round bar

Ø 10; 10,5; 11; 11,5;12; 12,5; 13; 13,5;14; 14,5; 15; 15,5;16; 16,5; 17; 17,5;18; 18,5; 19; 19,5;20; 20,5; 21; 21,5;22; 22,5; 23; 23,5;24; 24,5; 25; 26;27; 28; 29; 30; 31;32; 33; 34; 35; 36;37; 38; 40; 41; 42;43; 45; 46; 47; 48;50; 52

With heat treatment:3.0-6,0 Without heat treatment:3.0-11,7

according to metallurgical specifications, technical specifications, developed based on ASTM, EN, BS

-

1117; 4130; 4140; 4340; 5160; 8620; 9260; С10–60; 150М19; 150М36; 210М15; 220М07; 605М36; 527А60; 530А40; 635М15; 655А22; 655М13; 780М40; 805Н20; 817М40; 826М40; 835М30; 832М13; 070M20; 070M55; 080A40; 080A42; 080A47; 080M15; 080M30; 080M50; 080M40; 16MnCr5(16MnCr5S5); 18CrMo4; 18CrNiMo7–6; 18MnCr5; 20MoCr5; 25CrMoS4; 3ICrMoY9; 41CrS4; 2CrMo4 (42CrMo4S4); 65Si7and others


IZHSTAL

no less, than 5 t

GOST 2590–2006; GOST 14959–2016 categorу 1, 1А, 4, 4А

65; 70; 75; 80; 50ХГ; 50ХГА; 51ХГA; 55C2A;60Г; 65Г; 70Г; 60C2A; 60С2Г; 60С2ХФА;65C2B; 70C2XA; 70C3A; 50ХГФА;55C2 and others

GOST 14959–2016

Ø 45; 46; 48; 50; 52;53; 54; 55; 56; 58;60; 62; 63; 65; 70;72; 75; 80; 85; 90;95; 100; 105 ; 110;115; 120; 125 130; 135; 140;150; 160; 170; 180; 200

3,0–6,0

GOST 2590–2006; GOST 535–2005 group 2ГП, 3ГП Ст3сп; Ст5сп and others GOST 380–2005

no less, than 2,8 t

GOST 2590–2006; GOST 801–78 group ОХ Ст3сп; Ст5сп and others GOST 380–2005

GOST 2590–2006; GOST 1435–99 group 2ГП, 3ГП ШХ15; ШХ15СГ; ШХ15–В GOST 801–78

GOST 2590–2006; GOST 4543–2016 group 2ГП, 3ГП У7(А); У8(А); У9(А); У10(А); У12(А) GOST 1435–99

GOST 2590–2006; GOST 1050–2013 group 2ГП, 3ГП

15Г; 20Г; 25Г; 30Г; 35Г; 40Г; 45Г; 50Г;10Г2; 30Г2; 35Г2; 40Г2; 45Г2; 50Г2; 15Х;20Х; 30Х; 35Х; 40Х; 45Х ; 50Х; 15ХФ;30ХРА; 38Х; 20ХН; 40ХФА; 18ХГТ; 20ХГР;20ХГСА; 25ХГСА; 30ХГСА; 35ХГСА;25ХГТ; З0ХГТ; ЗЗХС; 38ХС; 40ХС;15ХМ; 20ХМ; 30ХМ; 35ХМ; 30ХМА;30ХНЗМФА; 38ХГНМ; 20ХНР; 38Х2МЮА;40ХНМФА; 12ХН2; 12ХН3А; 12Х2Н4А;20Х2Н4А; ЗОХНЗА; 12ХР; 20ХН; 40ХН;45ХН; 50ХН; 20ХГНТР; 25Х2Н4ВА;30ХН2ВА; 45ХН2МФА and others

GOST 4543–2016

GOST 2590–2006; GOST 1050–2013 group 2ГП, 3ГП 10; 15; 20; 25; 30; 35; 40; 45; 50; 55; 60 GOST 1050–2013

Ø 45; 46; 48; 50; 52;53; 54; 55; 56; 58;60; 62; 63; 65; 70;72; 75; 80; 85; 90;95; 100; 105 ; 110;115; 120; 125; 130; 135; 140;150; 160; 170; 180; 200

3,0–6,0

GOST 2590–2006; GOST 20072–74 subgroup а, б, в 12Х1МФ; 20ХЗМВФ; 25Х1МФ and others GOST 20072–74

no less, than 2,8 t


-

1117; 4130; 4140; 4340; 5160; 8620; 9260; С10–60; 150М19; 150М36; 210М15; 220М07; 605М36; 527А60; 530А40; 635М15; 655А22; 655М13; 780М40; 805Н20; 817М40; 826М40; 835М30; 832М13; 070M20; 070M55; 080A40; 080A42; 080A47; 080M15; 080M30; 080M50; 080M40; 16MnCr5(16MnCr5S5); 18CrMo4; 18CrNiMo7–6; 18MnCr5; 20MoCr5; 25CrMoS4; 3ICrMoY9; 41CrS4; 2CrMo4(42CrMo4S4); 65Si7 and others


GOST 2590–2006;GOST 14959–2016 category 1, 1А, 4, 4А

65; 70; 75; 80; 50ХГ; 50ХГА; 51ХГA; 55C2A;60Г; 65Г; 70Г; 60C2A; 60С2Г; 60С2ХФА; 65C2B; 70C2XA; 70C3A; 50ХГФА; 55C2 and others

GOST 14959–2016

Ø 14,25–50

3,0–6,0

GOST 14955–77

group Г, Д

According to GOST

GOST 801; GOST 1050;GOST 1435; GOST 4543;GOST 4959; GOST 5950;GOST 14959; GOST 19265;GOST 19281; GOST 20072

IZHSTAL no less, than 3,0 t

Ø 50–110 Technical agreements According to GOST

GOST 801; GOST 1050;GOST 1435; GOST 4543;GOST 4959; GOST 5950;GOST 14959; GOST 19265;GOST 19281; GOST 20072



28 29

HOT-ROLLED SQUARE BARS2

PRODUCTPROFILE




Size, mm Length, m

Hot-rolled square bar

12; 13; 14; 15; 16;17; 18; 19; 20; 21;22; 24; 25; 26; 27;28; 30; 32; 34; 35;36; 38; 40

With heat treatment:

3.0-6,0 without heat

treatment:3.0-11,7


IZHSTAL

no less, than 5 t



15Г; 20Г; 25Г; 30Г; 35Г; 40Г; 45Г; 50Г; 10Г2; 30Г2; 35Г2; 40Г2; 45Г2; 50Г2; 15Х; 20Х; 30Х; 35Х; 40Х; 45Х; 50Х; 15ХФ; 30ХРА; 38Х; 20ХН; 40ХФА; 18ХГТ; 20ХГР; 20ХГСА; 25ХГСА; 30ХГСА; 35ХГСА; 25ХГТ; З0ХГТ; ЗЗХС; 38ХС; 40ХС; 15ХМ; 20ХМ; 30ХМ; 35ХМ;30ХМА; 30ХНЗМФА; 38ХГНМ; 20ХНР; 38Х2МЮА; 40ХНМФА; 12ХН2; 12ХН3А; 12Х2Н4А; 20Х2Н4А; ЗОХНЗА; 12ХР; 20ХН; 40ХН; 45ХН; 50ХН; 20ХГНТР; 25Х2Н4ВА; 30ХН2ВА; 45ХН2МФА and others

GOST 4543–2016




–

1117; 4130; 4140; 4340; 5160; 8620; 9260; С10–60; 150М19; 150М36; 210М15; 220М07; 605М36; 527А60; 530А40; 635М15; 655А22; 655М13; 780М40; 805Н20; 817М40; 826М40; 835М30; 832М13; 070M20; 070M55; 080A40; 080A42; 080A47; 080M15; 080M30; 080M50; 080M40; 16MnCr5(16MnCr5S5); 18CrMo4; 18CrNiMo7–6; 18MnCr5; 20MoCr5; 25CrMoS4; 3ICrMoY9; 41CrS4; 2CrMo4(42CrMo4S4); 65Si7 and others

acccording to metallurgical specifications, technological agreements based onна основе ASTM, EN, BS

GOST 2591–2006; GOST 14959–2016 category 1, 1А, 4, 4А

65; 70; 75; 80; 50ХГ; 50ХГА; 51ХГA;55C2A; 60Г; 65Г; 70Г; 60C2A; 60С2Г;60С2ХФА; 65C2B; 70C2XA; 70C3A;50ХГФА; 55C2 and others

GOST 14959–2016

45; 50; 55; 60; 65;70; 75; 80; 85; 90

3,0–6,0

GOST 2591–2006; GOST 535–2005 – Ст3сп; Ст5сп and others GOST 380–2005

no less, than 2,8 t



15Г; 20Г; 25Г; 30Г; 35Г; 40Г; 45Г; 50Г; 10Г2; 30Г2; 35Г2; 40Г2; 45Г2; 50Г2; 15Х; 20Х; 30Х; 35Х; 40Х; 45Х; 50Х; 15ХФ; 30ХРА; 38Х; 20ХН; 40ХФА; 18ХГТ; 20ХГР; 20ХГСА; 25ХГСА; 30ХГСА; 35ХГСА; 25ХГТ; З0ХГТ; ЗЗХС; 38ХС; 40ХС; 15ХМ; 20ХМ; 30ХМ; 35ХМ; 0ХМА; 30ХНЗМФА; 38ХГНМ; 20ХНР; 38Х2МЮА; 40ХНМ-ФА; 12ХН2; 12ХН3А; 12Х2Н4А; 20Х2Н4А; ЗОХНЗА; 12ХР; 20ХН; 40ХН; 45ХН; 50ХН; 20ХГНТР; 25Х2Н4ВА; 30ХН2ВА; 45ХН2МФА and others

GOST 4543–2016




–

1117; 4130; 4140; 4340; 5160; 8620; 9260; С10–60; 150М19; 150М36; 210М15; 220М07; 605М36; 527А60;530А40; 635М15; 655А22; 655М13; 780М40; 805Н20; 817М40; 826М40; 835М30; 832М13; 070M20; 070M55;080A40; 080A42; 080A47; 080M15; 080M30; 080M50; 080M40; 16MnCr5(16MnCr5S5); 18CrMo4; 18CrNiMo7–6; 18MnCr5; 20MoCr5; 25CrMoS4; 3ICrMoY9; 41CrS4; 2CrMo4(42CrMo4S4); 65Si7 and others

acccording to metallurgical specifications, technological agreements based onна основе ASTM, EN, BS

GOST 2591–2006; GOST 14959–2016 category 1, 1А, 4, 4А65; 70; 75; 80; 50ХГ; 50ХГА; 51ХГA; 55C2A; 60Г; 65Г; 70Г; 60C2A; 60С2Г; 60С2ХФА; 65C2B; 70C2XA; 70C3A;50ХГФА; 55C2 and others

GOST 14959–2016



30 31

HOT-ROLLED HEXAGONAL BARS 2

PROFILEStandards for product Class, group Steel grade Standards

for chemical compositionManufacturing

plant Minimal lotSize, mm Length, m

12; 13; 14; 15; 16; 17;18; 19; 20; 21; 22; 24;26; 27; 28; 30; 32; 34;36; 38; 40; 41

With heat treatment:3.0-6,0

without heat treatment:3.0-11,7




15Г; 20Г; 25Г; 30Г; 35Г; 40Г; 45Г; 50Г; 10Г2; 30Г2; 35Г2; 40Г2; 45Г2; 50Г2; 15Х; 20Х; 30Х; 35Х; 40Х; 45Х; 50Х; 15ХФ; 30ХРА; 38Х; 20ХН; 40ХФА; 18ХГТ; 20ХГР20ХГСА; 25ХГСА; 30ХГСА; 35ХГСА; 25ХГТ; З0ХГТ; ЗЗХС; 38ХС; 40ХС; 15ХМ; 20ХМ; 30ХМ; 35ХМ; 30ХМА;30ХНЗМФА; 38ХГНМ; 20ХНР; 38Х2МЮА; 40ХНМФА; 12ХН2; 12ХН3А; 12Х2Н4А; 20Х2Н4А; ЗОХНЗА;12ХР; 20ХН; 40ХН; 45ХН; 50ХН; 20ХГНТР; 25Х2Н4ВА; 30ХН2ВА; 45ХН2МФА and others

GOST 4543–2016


according to metallurgical specifications, technological agreements, developed basedon ASTM, EN, BS

–

1117; 4130; 4140; 4340; 5160; 8620; 9260; С10–60; 150М19; 150М36; 210М15; 220М07; 605М36; 527А60; 530А40; 635М15; 655А22; 655М13; 780М40; 805Н20; 817М40; 826М40; 835М30; 832М13 070M20; 070M55; 080A40; 080A42; 080A47; 080M15; 080M30; 080M50; 080M40; 16MnCr5(16MnCr5S5); 18CrMo4; 18CrNiMo7–6; 18MnCr5; 20MoCr5; 25CrMoS4; 3ICrMoY9; 41CrS4; 2CrMo4 (42CrMo4S4); 65Si7 and others

according to metallurgical specifications, technological agreements, developed based on ASTM, EN, BS



32 33

HOT-ROLLED STRIP 2

PROFILEStandards

for product Class, group Steel grade Standardsfor chemical composition


Size, mm (width x thickness) Length, m

16 х 1018 х 9; 10; 11; 1219 х 1320 х 5; 6; 8; 10; 12; 1421 х 1322 х 5; 6; 7; 8; 9; 10; 11; 12; 14; 15; 1723 х 725 х 5; 6; 7; 8; 9; 10; 11; 12; 14; 16; 18; 2026 х 6; 7; 8; 13; 2027 х 5; 8; 14; 1828 х 7; 8; 9; 10; 11; 12; 13; 14; 16; 18; 20; 2230 х 4; 5; 6; 7; 8; 9; 10; 12; 14; 16; 18; 20; 2232 х 5; 6; 7; 8; 10; 12; 14; 16; 18; 20; 22; 24; 2533 х 12; 14; 2034 х 10; 12; 15; 2235 х 5; 5,5; 8; 10; 12; 14; 18; 20; 25; 2836 х 4; 4,5; 5; 6; 6,5; 7; 8; 9; 10; 11; 12; 14; 16; 18; 2036 х 22; 25; 2837 х 2438 х 4; 6; 8; 20; 2238,5 х 639 х 3240 х 4; 4,5; 5; 5,6; 6; 7; 8; 9; 10; 11; 12; 14; 16; 18; 2040 х 22; 25; 28; 30; 3241 х 10; 3441,5 х 942 х 5; 6; 9; 11; 12; 14; 16; 18; 20; 22; 24; 25; 26; 28; 3243 х 17; 3044 х 1245 х 4; 4,5; 5; 5,6; 6; 7; 8; 9; 10; 11; 12; 14; 16; 18; 20; 2245 х 25; 28; 30; 32; 3646 х 6; 947 х 7; 11; 17; 18; 2748 х 22; 3249 х 850 х 4; 5; 5,5; 6; 7; 8; 9; 10; 11; 12; 14; 16; 18; 20; 22; 2550 х 28; 30; 32; 35; 3652 х 12; 21; 22; 3253 х 4; 5; 27; 3055 х 4; 4,5; 5; 6; 7; 7,5; 8; 9; 10; 14; 18; 20; 22; 23; 25; 2855 х 30; 32; 3656 х 4; 5; 6; 7; 8; 9; 10; 11; 12; 14; 16; 18; 25; 28 56 х 32; 3657,5 х 2358 х 11; 1460 х 4; 4,5; 5; 5,5; 6; 6,5; 7


3.0-6,0 without

heat treatment:3.0-11,7

GOST 103–2006; GOST 4405–75

group 2ГП, 3ГП Ст3сп, Ст5сп and others GOST 535–2005


group ОХ ШХ15; ШХ15СГ; ШХ15-В GOST 801–78


group 2ГП, 3ГП

15Г; 20Г; 25Г; 30Г; 35Г; 40Г; 45Г; 50Г; 10Г2; 30Г2; 35Г2; 40Г2; 45Г2; 50Г2; 15Х; 20Х; 30Х; 35Х; 40Х; 45Х; 50Х; 15ХФ; 30ХРА; 38Х; 20ХН; 40ХФА; 18ХГТ; 20ХГР; 20ХГСА; 25ХГСА; 30ХГСА; 35ХГСА; 25ХГТ; З0ХГТ; ЗЗХС; 38ХС; 40ХС; 15ХМ; 20ХМ; 30ХМ; 35ХМ; 30ХМА; 30ХНЗМФА; 38ХГНМ; 20ХНР; 38Х2МЮА; 40ХНМФА; 12ХН2; 12ХН3А; 12Х2Н4А; 20Х2Н4А; ЗОХНЗА; 12ХР; 20ХН; 40ХН; 45ХН; 50ХН; 20ХГНТР; 25Х2Н4ВА; 30ХН2ВА; 45ХН2МФА and others

GOST 4543–2016

group 2ГП, 3ГП 10; 15; 20; 25; 30; 35; 40; 45; 50; 55; 60 GOST 1050–2013

subgroup а, б, в 12Х1МФ; 20ХЗМВФ; 25Х1МФ and others GOST 20072–74

-

1117; 4130; 4140; 4340; 5160; 8620; 9260; С10–60; 150М19; 150М36; 210М15; 220М07; 605М36; 527А60; 530А40; 635М15; 655А22; 655М13; 780М40; 805Н20; 817М40; 826М40; 835М30; 832М13; 070M20; 070M55;080A40; 080A42; 080A47; 080M15; 080M30; 080M50; 080M40; 16MnCr5(16MnCr5S5); 18CrMo4; 18CrNiMo7–6; 18MnCr5; 20MoCr5; 25CrMoS4; 3ICrMoY9; 41CrS4; 42CrMo4; 42CrMo4S4; 65Si7 and others


category 1, 1А, 4, 4А

65; 70; 75; 80; 50ХГ; 50ХГА; 51ХГA; 55C2A;60Г; 65Г; 70Г; 60C2A; 60С2Г; 60С2ХФА;65C2B; 70C2XA; 70C3A; 50ХГФА;55C2 and others

GOST 14959–2016



34 35

HOT-ROLLED STRIP 2

PROFILEStandards

for product Class, group Steel grade Standardsfor chemical composition


Size, mm (width x thickness) Length, m

60 х 8; 8,5; 9; 10; 11; 12; 13; 1460 х 16; 18; 20; 24; 25; 28; 3061 х 562 х 7; 11; 1563 х 5; 7; 11,5; 12; 13; 1865 х 4; 4,5; 5; 5,5; 6; 7; 8; 9; 10; 11; 12; 14; 16; 2068 х 5; 1170 х 4; 5; 5,5; 6; 7; 8; 9; 10; 10,5; 11; 12; 13; 14; 16; 18; 20; 2575 х 4; 5; 5,5; 6; 7; 8; 9; 10; 10,5; 11; 12; 14; 18; 20; 22; 25; 28; 3078 х 6,580 х 4; 5; 5,5; 6; 6,5; 7; 8; 9; 10; 11; 12; 13;14; 15; 16; 20; 22; 25; 28; 3081,5 х 583 х 884 х 5,485 х 4; 5; 6; 6,5; 7; 8; 10,5; 12; 14; 2087 х 4,588 х 590 х 4; 5; 5,5; 6; 6,3; 7; 7,5; 8; 9; 10; 11;12; 13; 15; 2093 х 5,5; 795 х 5,5; 6; 6,5; 7; 8; 10; 1297 х 6,5100 х 4; 5; 6; 8; 10; 12; 13


3.0-6,0 without

heat treatment:3.0-11,7

GOST 103–2006; GOST 4405–75

group 2ГП, 3ГП Ст3сп; Ст5сп and others GOST 535–2005


group ОХ ШХ15; ШХ15СГ; ШХ15-В GOST 801–78


group 2ГП, 3ГП

15Г; 20Г; 25Г; 30Г; 35Г; 40Г; 45Г; 50Г; 10Г2;30Г2; 35Г2; 40Г2; 45Г2; 50Г2; 15Х; 20Х; 30Х;35Х; 40Х; 45Х; 50Х; 15ХФ; 30ХРА; 38Х; 20ХН;40ХФА; 18ХГТ; 20ХГР; 20ХГСА; 25ХГСА;30ХГСА; 35ХГСА; 25ХГТ; З0ХГТ; ЗЗХС;38ХС; 40ХС; 15ХМ; 20ХМ; 30ХМ; 35ХМ;30ХМА; 30ХНЗМФА; 38ХГНМ;20ХНР; 38Х2МЮА; 40ХНМФА; 12ХН2;12ХН3А; 12Х2Н4А; 20Х2Н4А; ЗОХНЗА;12ХР; 20ХН; 40ХН; 45ХН; 50ХН; 20ХГНТР;25Х2Н4ВА; 30ХН2ВА; 45ХН2МФА and others

GOST 4543–2016

18 х 14; 1619 х 15,5; 1620 х 15; 16; 1821 х 1822 х 16; 18; 2023 х 1824 х 18; 19; 20; 2227 х 2232 х 2833 х 2734 х 2938 х 3438,5 x 6

3,0–6,0 group 2ГП, 3ГП 10; 15; 20; 25; 30; 35; 40; 45; 50; 55; 60 GOST 1050–2013

60 х 30; 32; 36; 40; 4562 х 2263 х 25; 28; 30; 32; 36; 40; 4565 х 20; 25; 28; 30; 32; 36; 40; 4570 х 20; 22; 25; 28; 30; 32; 36; 40; 45; 5075 х 20; 22; 25; 28; 30; 32; 36; 40; 4580 х 20; 22; 25; 28; 30; 32; 36; 40;45; 50; 56; 6085 x 25; 28; 30; 32; 36; 40; 45; 50; 56; 6090 х 20; 25; 28; 30; 32; 36; 40; 45; 50; 56; 6095 х 36: 60

3,0–6,0

subgroup а, б, в 12Х1МФ; 20ХЗМВФ; 25Х1МФ and others GOST 20072–74

-

1117; 4130; 4140; 4340; 5160; 8620; 9260; С10–60; 150М19; 150М36; 210М15; 220М07; 605М36; 527А60; 530А40; 635М15; 655А22; 655М13; 780М40; 805Н20; 817М40;826М40; 835М30; 832М13; 070M20; 070M55;080A40; 080A42; 080A47; 080M15; 080M30;080M50; 080M40; 16MnCr5(16MnCr5S5); 18CrMo4; 18CrNiMo7–6; 18MnCr5; 20MoCr5; 25CrMoS4; 3ICrMoY9; 41CrS4; 42CrMo4; 42CrMo4S4; 65Si7 and others


GOST 103–2006

category 1, 1А, 4, 4А

65; 70; 75; 80; 50ХГ; 50ХГА; 51ХГA; 55C2A; 60Г; 65Г; 70Г; 60C2A; 60С2Г; 60С2ХФА; 65C2B; 70C2XA; 70C3A; 50ХГФА; 55C2 and others GOST 14959–2016



36 37

HOT-ROLLED STRIP FOR SPRING2

PRODUCTPROFILE

Standards for product Class, group Steel grade Standards

for chemical compositionManufacturing

plant Minimal lotSize, mm (width x thickness) Length, m

Hot-rolled steel strip for springs with a bending radius R=10-20 mm

5 х 45; 606 х 44; 45; 55; 65; 68; 706,5 х 457 х 55; 60; 65; 70; 1008 х 50; 60; 63; 68; 70; 75; 769 х 459,5 х 7510 х 55; 60; 65; 68; 70; 75; 90; 10011 х 60; 65; 70; 7512 х 60; 70; 75; 80; 90; 10012,5 х 55; 6013 х 70; 75; 80; 10013,8 х 7514 х 45; 75; 80; 90; 10015 х 45; 70; 75; 8015,4 х 7516 х 65; 75; 80; 90; 10017 х 8017,5 х 81,318 х 75; 80; 90; 10019 х 75; 80; 9020 х 65; 90; 10021 х 75; 80; 9022 х 65; 70; 90; 10023 х 80; 9023,5 х 5524 х 55; 80; 9024,5 х 9025 х 80; 90; 10026 х 80; 9027 х 80; 9028 х 80; 9029 х 9030 х 90

3,0–6,0Technical agreements developed based on GOST 7419-90

– 60С2; 60С2Г; 60С2ХА

GOST 14959-2016 Technical agreements, developed based on GOST 7419-90

IZHSTAL

no less, than 3 t

Hot-rolled steel strip for springs with a bending radius R=H/2 mm

10 х 65; 75; 9011 х 7512 х 70; 75; 80; 9013 х 7514 х 9015 х 7517 х 7520 х 8022 х 80; 9024 х 90

3,0–6,0Technical agreements developed based on GOST 7419-90

group 2ГП, 3ГП 60С2; 60С2Г; 60С2ХА no less, than 3 t



38 39

PRODUCTS FOR REINFORCEMENT OF CONCRETE2

LONG PRODUCTS

PRODUCTPROFILE




Size, mm Length, m

Hot-rolled steel bar for reinforcement of concrete

Ø 8; 10 (coils)№ 6; 8; 10 (coils)№ 10; 12; 14; 16; 18; 20; 22; 25; 28; 32; 36; 40 (bars)

in coils up to 850 kg;in bars of 06.0-12.0 m

length

GOST 5781–82GOST 34028–2016

A-I (А240), A-II (А300), A-III (А400) plain and ribbed

Class А-I: Ст3сп(пс) Class А-II: Ст5спClass А-III: 35ГС; 25Г2С

GOST 5781–82GOST 34028–2016


65 t

Ø 6,0–12,0

in coils up to 2300 kg,in bars up to 12,0 m

length

A-I (A240)plain A-I (A240)

plain Ст3 GOST 380–2005

BELORETSK METALLURGICALPLANT

Approved at order receiptA-III (A400) A-III (A400) 35ГС; 25Г2С GOST 5781–82

№ 6–12 GOST R 52544–2006 А500С; B500С ribbed Ст1–3 GOST 380–2005

Hot-rolled steel bar for reinforcement of concrete,heat treated

№ 10; 12; 14; 16; 18; 20; 22; 25(bars)

6,0—12,0 GOST 10884-94; GOST R 52544-2006 plain and ribbed А400С; А500С; А600С

GOST 10884-94;GOST R 52544-2006;GOST R 34028-2016


65 t№ 10; 12; 14; 16; 20(bars) 6,0 — 12,0 DIN 488: 2009-08 ribbed B500B DIN 488-2: 2009-08

№ 10; 12; 14; 16; 20(bars) 6,0 — 12,0 ONORM B 4707: 2014 ribbed B550B ONORM B 4707: 2014


40 41

SEMI-FINISHED PRODUCTS 2

PRODUCTPROFILE

Standards for product Class, group Steel grade

Standardsfor chemical composition


Size, mm Length, m

Hot-rolled square billet (bloom)

45; 50; 55; 60; 65;70; 75; 80; 85; 90 3,0–6,0 TU 14–1–4492–2019 - Steel grades, as the ones for rolled

square according to GOST 2591-2006 -

IZHSTAL

no less, than 2,8 t

105; 110; 115; 120;125; 130; 135; 140;145; 150; 155160; 165; 170; 175; 180; 185; 190; 195200; 205; 210; 215; 220; 225; 230; 235;240; 245; 250

1,0–4,0TU 14-1-4492-88 (blooms) 105-125 as per technical agreements

-

Ст3сп; Ст5сп and others GOST 380–2005

no less, than 3 t

У7(А); У8(А); У9(А); У10(А); У12(А) GOST 1435–99

15Г; 20Г; 25Г; 30Г; 35Г; 40Г; 45Г; 50Г; 10Г2; 30Г2; 35Г2; 40Г2; 45Г2; 50Г2; 15Х; 20Х; 30Х; 35Х; 40Х; 45Х; 50Х; 15ХФ; 30ХРА; 38Х; 20ХН; 40ХФА; 18ХГТ; 20ХГР; 20ХГСА; 25ХГСА; 30ХГСА; 35ХГСА; 25ХГТ; З0ХГТ; ЗЗХС; 38ХС; 40ХС; 5ХМ; 20ХМ; 30ХМ; 35ХМ; 30ХМА; 30ХНЗМФА;38ХГНМ; 20ХНР; 38Х2МЮА; 40ХНМ-ФА; 12ХН2; 12ХН3А; 12Х2Н4А; 20Х2Н4А; ЗОХНЗА; 12ХР; 20ХН; 40ХН; 45ХН; 50ХН and others

GOST 4543–2016

10; 15; 20; 25; 30; 35; 40; 45; 50; 55; 60 GOST 1050–2013

12Х1МФ; 20ХЗМВФ; 25Х1МФ and others GOST 20072–74

65; 70; 75; 80; 50ХГ; 50ХГА; 51ХГA; 55C2A;60Г; 65Г; 70Г; 60C2A; 60С2Г; 60С2ХФА; 65C2B; 70C2XA; 70C3A; 50ХГФА; 55C2 and others

GOST 14959–2016

LONG PRODUCTS


42 43

HOT-ROLLED FLAT PRODUCTS FROM CORROSION-RESISTING STEEL AND ALLOYS

COLD-ROLLED FLAT PRODUCTS FROM CORROSION RESISTING STEEL AND ALLOYS

3TYPE

Size, mmSteel grade Standards

for product Surface quality Mechanical properties Manufacturing plantThickness Width Length

Plate

4,0-6,0 1000-1500 2000-600008Х18Н10;12Х18Н10Т;20Х23Н18; 10Х17Н13М2Тand others

GOST 7350-77 М2б-М5б: GOST 7350-77 GOST 7350-77


over 6,0-50,0 1000-1800 4000-6000

6,0-25,0 1000-1800 4000-6000 S30400;S43000 ASTM A240/A240M-12 No.1 Finish

ASTM A480/A480M-17 ASTM A240/A240M-17

over 50,0-100,0 1000-1500 3000-6500

08Х18Н10;12Х18Н10Т;10Х17Н13М2Т-ГР; 20Х13 and others

protocol 1036 - GOST 7350-77

Coil (including strip) 4,0-6,0 200-1500 – 08Х18Н10; 12Х18Н10Т and others ТU 14-1-4780-90 М2б-М4б: GOST 5582-75;

М2б-М5б: GOST 7350-77GOST 5582-75;GOST 7350-77

TYPESize, mm

Steel grade Standards for product Surface quality Mechanical properties Manufacturing plant

Thickness Width Length

Sheet and plate 0,5-4,0 600-1500 2000-6000 08Х18Н10; 12Х18Н10Т and others

GOST 5582-75;GOST 7350-77

GOST 5582-75;GOST 7350-77

GOST 5582-75;GOST 7350-77


Coil (including strip)

0,5-3,9 200-1500 - 12Х18Н10Т and others TU 14-1-4780-90;TU 14-1-3485-82

М2а-М4а;GOST 5582-75 GOST 5582-75

0,5-4,0 200-1500 - S30400 and others ASTM A240/A240M-12 2B ASTM A240/A240M-12

FLAT PRODUCTS


44 45

HOT-ROLLED FLAT PRODUCTS (EXCLUDING FLAT PRODUCTS FROM CORROSION RESISTING STEEL)

3TYPE

Size, mmSteel grade Standards

for product Surface quality Mechanical properties Manufacturing plantThickness Width Length

Plate

2,5-4,0 600-1250

2000-6500

ОК300В1-СТ2ПС; ОК360В5;ОК360В4-СТ3КПand others

GOST 16523-97III, IV according to GOST 14637-89

category 1, 4, 5: GOST 16523-97


4,0-6,0;over. 6,0-20,0

600-1500;1200-2000

Ст2сп; Ст2пс; Ст3сп; Ст3пс and others GOST 14637-89 category 1-5:

GOST 14637-89

6,0-25,0 600-1950 3500-6500 09Г2С; 10ХСНД;16Г2АФ and others

GOST 19281-2014;GOST 5520-2017

GOST 14637-89;GOST 5520-2017

GOST 19281-2014: Class of strength265, 295, 325, 345, 390, 440; as per the customer’s requirement with standard impact strength categories 1-10, 12, 14, 15; GOST 5520-2017: categories 2-14

6,0-20,0 600-1950 3500-6500 10ХСНД GOST 6713-91 GOST 14637-89 category 1, 2, 3:GOST 6713-91

over 6,0-20,0 600-2000 3500-650035; 45: GOST 1050-2013;20Х; 40Х: GOST 4543-2016;65Г: GOST 14959-2016

GOST 1577-93 GOST 14637-89 As per the customer’s requirements; GOST 1577-93

over.20,0-100,0 600-2000 3500-6500 Ст0; Ст3пс2;Ст3сп5 and others As per agreed protocol actual category 1-5: GOST 14637-89

over 20,0-100,0 600-2000 3500-6500 09Г2С; 10ХСНД and others As per agreed protocol actual

GOST 19281-2014: Class of strength 265, 295, 325, 345, 390; as per the customer’s requirement with standard impact strength categories 1-10, 12, 15 norms are facultative

Coil

2,5-3,5 600-1250

-

ОК300В1-СТ2ПС; ОК360В5;ОК360В4-СТ3КП and others GOST 16523-97

III, IV according to GOST 14637-89

category1, 4, 5: GOST 16523-97

4,0-6,0 600-1500 Ст2сп; Ст2пс;Ст3сп; Ст3пс GOST 14637-89 GOST 14637-89

2,5-4,0 600-1500 20; 35; 50; 65Г; 20Х As per agreed protocol As per agreed protocol As per agreed protocol

2,5-6,0 140-1250 Ст2сп; Ст2пс; Ст3сп; Ст3пс;08Ю; 08пс; 10; 20 and others

TU 14-1-3579-83;TU 14-1-2660-79;TU 14-1-4516-88; As per agreed protocol with modified requirements

TU 14-1-3579-83;TU 14-1-2660-79;TU 14-1-4516-88; ; As per agreed protocol with modified requirements

TU 14-1-3579-83;TU 14-1-2660-79;TU 14-1-4516-88; ; As per agreed protocol with modified requirements

Plate 8,0-40,0 1500, 2000 as per protocol S235JR+NS355J2+N

Technical protocol MS 87-239Technical protocol MS 87-236

class Аsubgroup 1DIN EN 10163-2: 2005

DIN EN 10025-2005

FLAT PRODUCTS


HOT-ROLLED FLAT PRODUCTS FROM CREEP RESISTING DIFFICULT-TO-FORM ALLOYS

3

46

TYPESize, mm

Steel grade Standards for product Manufacturing plantthickness width length

Sheet and plate

0,5–14,0 1000 2000ЭИ435 (ХН78Т),ЭИ703-ВД (ХН38ВТ-ВД)ЭИ602 (ХН75МБТЮ)

TU 14-1-4296-87, TU 14-1-1747-76, GOST 24982-81 TU 14-1-1747-76, GOST 24982-81, TU 14-1-5103-92, TU 14-1-2114-77


0,5–3,9; 6 1000 2000 ЭИ868 (ХН60ВТ) TU 14-1-4296-87, TU 14-1-1747-76, GOST 24982-81 TU 14-1-4296-87, TU 14-1-1747-76

47

FLAT PRODUCTS


4 SALES OF PRODUCTS

MANUFACTURING PLANTS

SALES DIVISIONS

48 49

SALES OF PRODUCTS

NAME ADDRESS TELEPHONE FAX E-mail


454047, Chelyabinsk, 2-nd Paveletskaya str., 32

Tel.: +7 (351) 722 85 83 +7 (351) 725 30 34 [email protected]


453500, Bashkortostan Republic, Beloretsk, Blukher str. 1

Tel.: +7 (34792) 3-33-40 +7 (34792) 3-35-44 +7 (34792) 3-13-35

[email protected]

IZHSTAL 426006, Udmurt Republic, Izhevsk, Novoazhimova str., 6

Tel.: +7 (3412) 91 01 60Факс: +7 (3412) 91 09 75 [email protected]

More than 80 divisions are selling Mechel’s steel products in Russia and abroad including 18 service centers for additional rolled steel processing.

Mechel Service Global B.V. is an international sales net, selling steel products manufactured by Mechel Group’s enterprises. Mechel Service Global offers a wide range of services on rolled steel processing under the condition of the warehouse selling.

Mechel Service is a sales network, operating at the Russian market. Nearly 60 of company’s warehouses are located in 45 Russian cities and towns. Mechel Service is selling a wide range of steel products: reinforcing steel products (including cold-formed), ordinary sheets and plates, corrugated plates, high quality long steel products, wire Вр-1, sections, hardware, ropes, stainless long and flat products, seamless, welded and profiled pipes, welded wire mesh.

NAME ADDRESS TELEPHONE / FAX E-mail

Office in Moscow Moscow, Mishina str., 35

+7 (495) 795-06-90 [email protected]

Warehouse №1 in Vidnoje

Vidnoje, Belokamennoje shosse, prop. 13, territory ОАО «Moscoke»

Warehouse №2 in Vidnoje

Warehouse «Stainless rolled steel in Vidnoje

Warehouse «Ropes» in Vidnoje

Office and Warehouse in Ryazan Ryazan, Southern promusel, 13. «Trest№7» +7 (4912) 29-33-12 [email protected]

Office in Snt.Petersburg Snt.Petersburg, Obukhovskaya storona pr., 112, bld. 2, liter I +7 (812) 602-15-40 [email protected]

Warehouse in Snt.Petersburg Snt.Petersburg, Petro-Slavyanka vil., road to Petro-Slavyanka, З. +7 (981) 796-1219

Warehouse in Snt.Petersburg Snt.Petersburg, Metallostroy vil., road to Metallostroy, 5, bld., 40 liter. P +7 (798) 168-21-63

Warehouse in Stariy Oskol Stariy Oskol , st,Kotyol, Promusel, Montazhnaya pl., track M-4 №22 str. 1. +7 (472) 546-93-90 [email protected]

Office in Krasnodar Krasnodar, Seleznyova str., bld. 204/2, 4 floor. +7 (861) 217-02-96 [email protected]

Warehouse in Krasnodar Krasnodar, Novorossiy kaya str., 55 +7 (861) 212-53-11

Office in Rostov-na-Donu Rostov-na-Donu, ул. Mенжинского, 2 L +7 (863) 300-17-20 [email protected]

Warehouse in Rostov-na-Donu Rostov-na-Donu , Dovlatov str., 148 +7 (863) 218-43-19

Office in Nizhniy Novgorod Nizhniy Novgorod, South highway, 16 V, office 334, 335 +7 (831) 255-06-01 [email protected]

Warehouse in Nizhniy Novgorod Nizhniy Novgorod, Julius Fuchek str., 60.

Office and Warehouse in Yekaterinburg Yekaterinburg, Uchiteley str. 37 +7 (343) 270-80-70 [email protected]

Office in Chelyabinsk Chelyabinsk, Alchevskaya str., 12. +7 (351) 222-0208 [email protected]

Warehouse in Chelyabinsk Chelyabinsk , 2-nd Paveletskaya str., 50. CMP PAO, OTC-3

Office and Warehouse in Perm Perm, Bereg Kamy str., 37/3 +7 (342) 238-85-58 [email protected]

Warehouse in Perm Perm, Solikatskaya str., 273, shop №1 (3 bay). «Uralpromsnab». [email protected]

Office in Tjumen Tjumen ,Autoremontnaya str., 49 +7 3452 68-06-01

Warehouse in Tjumen Tjumen, Tjumen region, Uteshevskiy vil., Promzona +7 (345) 269-48-69

Офис of sales in Surgut Surgut, ,Promishlennaya str., 17. +7 (346) 255-50-04

Warehouse in Surgut Surgut, Promishlennaya str., 17 +7 (346) 255-60-04

Office and Warehouse in Kirov Kirov, Lepse str., 25. +7 (833) 268-01-31 [email protected]

Office and Warehouse in Siktivkar Siktivkar, Lesoparkovaya str., 12. +7 (8212) 31-16-39

Office and Warehouse in Cherepovets Cherepovets, Khitikov str., 7 +7 (8202) 20-17-55 [email protected]

Office in Omsk Omsk, Solnechnaya str., 49, 4floor +7 (3812) 21-76-82 [email protected]

Warehouse in Omsk Omsk, 2-nd Solnechnaya, 41, entrance from «UMSR». +7 (381) 221-76-82 [email protected]

Office and Warehouse in Ufa Ufa, Stroitelnaya str., 2 +7 (347) 292-10-75 [email protected]

Warehouse in Sterlitamak Sterlitamak, Ufimskiy tract, 4.

Office and Warehouse in Orenburg Orenburg, Donguzskaya str.,.62 А. +7 (353) 237-56-81

Sales office in Kazan Kazan, Pionerskaya str., 17 +7 (843) 211-71-70 [email protected]

Warehouse «Batir» Tatarstan, Visokogorskiy region, Kindery station, Lesnaya str., 1.

Office and Warehouse in Naberezhnie Chelni Naberezhnie Chelni, Poligraphicheskaya str., 60/17. +7 (919) 684-28-31 [email protected]

Warehouse in Nizhnekamsk Nizhnekamsk, BSI territory.

Office and Warehouse in Cheboksary Cheboksary, Ishleyskiy proezd, 5 А. +7 (8352) 24-03-74 [email protected]

Sales office in Samara Samara, Gagarin str., 82А, of. 405 +7 (846) 207-22-27 [email protected]

Warehouse in Kinel Kinel, Promishlennaya str.,11 А.

Warehouse in Samara Samara, Olympiyskaya str., 67.

Office and Warehouse in Ulyanovsk Ulyanovsk, Moscow shosse, 68 А. +7 (842) 265-74-17 [email protected]

Office and Warehouse in Saratov Saratov, Stroiteley prospekt, 31. +7 (8452) 753-356 [email protected]

Office and Warehouse №1 in Krasnoyarsk Krasnoyarsk,Kalinina str.,175 А. +7 (391) 273-15-51 [email protected]

Warehouse № 2 in Krasnoyarsk Krasnoyarsk , Kutuzova str., 1, str. 41.

Office and Warehouse in Irkutsk Irkutsk, Rosa Luksembu,str., 220. +7 (3952) 54-64-04 [email protected]

Office and Warehouse in Abakan Abakan, Sovetskaya str., 182 Zh. +7 (390) 230-53-08 [email protected]

Office and Warehouse in Khabarovsk Khabarovsk, Stroitelnaya str., 18. +7 (421) 250-81-28 [email protected]

Office and Warehouse in Vladivostok Vladivostok, Borodinskaya str., 18 B +7 (423) 262-04-49 [email protected]

Office and Warehouse in Chita Chita, Aviatsionnaya str., 1. +7 (302) 228-40-04 [email protected]

Office and Warehouse Novosibirsk Novosibirsk, Mira str., 58. +7 (383) 230-5001 [email protected]

Warehouse in Novosibirsk Novosibirsk, Stantsionnaya str., 28 bld.4. +7 (383) 230-5001 [email protected]

Warehouse in Novosibirsk Novosibirsk, Dukacha str., 10. +7 (383) 230-5001 [email protected]

Office and Warehouse in Kemerovo Kemerovo, 1-ya Stakhanovskaya str., 35 +7 (384) 234-61-20 [email protected]

Office and Warehouse in Novokuznetsk Novokuznetsk, Doz str., 19/2 +7 (3843) 99-19-05 [email protected]

Office and Warehouse in Tomsk Tomsk, Mostovoy pereulok, 7 +7 (382) 267-61-67 [email protected]

Warehouse in Biysk Biysk, Prigorodnaya str. 94/1. +7 (738) 525-39-50 [email protected]

Office and Warehouse in Barnaul Barnaul, Pavlovskiy trakt, 204. +7 (385) 253-95-00 [email protected]

COMPANY Address Tel / Fax E-mail

MECHEL SERVICE GLOBAL B.V.Netherlands

Parkstraat, 20 2514 JK, The Hague,The Netherlands

Tel.: +31 70 844 00 00Fax: +31 70 844 00 01 [email protected]

Mechel-Service (RUSSIA)www.mechelservice.ru

Head Office: Entrance 1, Floor 2, 35, Mishina street 127083, Moscow, Russia

Tel. / Fax: +7 (495) 739 98 80 Call Centre: 8 800 700 95 50 90 (free calls within Russia)

[email protected]

SALESDIVISIONS

50

4SALES OF PRODUCTS

COMPANY Address Tel / Fax E-mail

Mechel Service StahlhandelAUSTRIA Gmbh

Lunzerstrasse 105,4021 Linz, Austria Tel.: +43 732 6924 0 [email protected]

Mechel Service Bel (BELARUS)

Office 23, 7, Ignatenko street 220035, Minsk, Republic of Belarus

Tel.: +375 17 226 66 38Fax: +375 17 203 92 12 [email protected]

Mechel Service BELGIUM

Generaal Lemanstraat, 74 2600, Antwerp, Belgium Tel.: +32 3 259 02 00 [email protected]

HBL Holding (GERMANY)www.hbl.de

Auf den Kampen 2059071 Hamm-Uentrop, Deutschland

Tel.: +49 02381 30033-0Fax: +49 02381 30033-31 [email protected]

Mechel Service KAZAKHSTANwww.mechelservice.kz

Abay avenue 151/115 (corner of Radostovets str), Business Center Alatau, off. 309, Almaty, Republic of Kazakhstan, 050009

Tel. / Fax: +7 (727) 391 16 50/51/52 [email protected]

Mechel Service StahlhandelCZECH REPUBLIC s.r.o.

Prumyslova 461,53003, Pardubice, Czech Republic

Tel.: +420 46 6047 111Fax: +420 46 6047 170 [email protected]

mechel company information

Documents