DANAHER CONTROLS

VEEDER-ROOT brandMechanical & Electric Counters

Available in three popular geared ratios, the Series 7434 is typicallyused with measuring wheels to totalize feet, yards, 1/8 yards, or meters.Its double-ended shaft can carry two measuring wheels for extra gripand stability in contacting measured material. It is commonly used in thetextile, wire and cable, paper, rope, and sheet products industries.

■ Precision linear measurement of all types of moving materials

■ Double stainless steel shafts accept dual measuring wheels

■ Heavy-duty ball bearings allow shaft speeds to 3000 rpm

■ White-on-black, high contrast figures for easy viewing

■ Clean, modern styled enclosure – corrosion and dust resistant

■ Models with 3:1, 1:1, or 0.375:1 revolution-to-count ratio

■ Counts in yards,1/8 yards, or feet using standard footage wheel

■ Counts in meters, using 1/3 meter wheel

■ Smooth action rotary knob reset

Noncorrosive materials are used throughout for years of trouble-freeservice. Models are provided that add in the clockwise, orcounterclockwise direction. Opposite rotation subtracts. All are right-hand drive.

Other features and configurations are available on special order, suchas: shaft variations, special wheel colors and markings, and resetoptions.

SPECIFICATIONSDrive: Geared Drive, adds one count for a specified number of drive shaft

revolutions; models subtract for opposite rotation; with 0.375:1 ratio, rightwheel is marked 0 to 7/8 by 1/8ths and reads yards and eighths whenused with 1-foot circumference measuring wheels

Speed: Continuous 3000 rpm or 3000 cpm, whichever is limitingTorque: Max static 2 oz-in.Gearing: Standard 3:1, 1:1, and 0.375:1Figures: 5; 0.270 in. high by 0.185 in. wide (6.9 mm x 4.7 mm); white on

black

Dimensions:

Reset: Manual knobLubrication: Not requiredMounting: BaseConstruction: End caps and worm base: Zamak; Case: C.A.B. plastic;

Internal Parts: Acetal resin, A.B.S. plastic or sintered metal; Worm DriveShaft: Stainless steel

Net Weight: 1 lb. (0.454 kg)

Typical Applications:

12345

Used with measuring wheels for lengthmeasuring of sheet or roll goods.

2.01" 51.1 mm

1.12" 28.5 mm

4.25" 108 mm

.875" 22.2 mm

1.33" 33.8 mm

1.75" 44.5 mm

1.875" 47.6 mm

2.50" 63.5 mm

5.348" 135.84 mm

1.143" 29 mm

1.125" 28.6 mm

.25" 6.4 mm

Dia. Shaft

.20" Dia. 5.1 mm 3 Holes

.58" 14.7 mm

2.23" 56.6 mm

1.125" Dia. 28.6 mm

.25" 6.4 mm

.625" 15.9 mm

5.808" 147.5 mm

1.765" 44.8 mm

Model No. Description Rotation

743415-003 Geared drive, base mount, 5 figures,knob reset, 1:1 ratio

743415-005 Geared drive, base mount, 5 figures,knob reset, 3:1 ratio

743425-003 Geared drive, base mount, 5 figures,knob reset, 1:1 ratio

743425-005 Geared drive, base mount, 5 figures,knob reset, 3:1 ratio

743425-014 Geared drive, base mount, 5 figures,knob reset, 0.375:1 ratio

1

2

A five-digit, gear-driventotalizer . . . ideal for usewith measuring wheels

7434 Worm Drive