md cooling water piping plan m
TRANSCRIPT
-
TECHNICAL DATA TYPE MD
Cooling Water Piping Plans M and U
Scope of supply (flow indicator and / or seal cooler) see TECHNICAL DATA and CONSTRUCTION FEATURES below
Sulzer Plan M (std.) (similar to API plan M)
Piping to seal heat exchangers (FI = flow indicator)
Sulzer Plan M (option, API-Design) (equivalent to API plan M)
Piping to seal heat exchangers (FI = flow indicator)
Sulzer Plan U (std.) (3)
Cooling to shaft seal housings & cooling to stationary shaft seal rings (FI = flow indicator)
Sulzer Plan U (option, API-Design) (3) Cooling to shaft seal housings & cooling to stationary shaft seal rings
(FI = flow indicator) TECHNICAL DATA Cooling Water Piping
WATER PRESSURE => __________ bar Ambient Temp. _______________ oC Min. Amb. Temp. ___________ oC
Water Temperature => Normal ________C Maximum _________ C Minimum __________ C
=> Flow Rate _____________ m3/h Total Heat Rejection __________ kW/h
SEAL COOLER 9 => Yes No See Seal Flush Piping Plan for details
Seal Pot 9 => Seal Pot Cooler Yes No See Secondary Seal Flush Plan for details
CONSTRUCTION FEATURES - COOLING PIPING Sulzer Cooling Water Piping Class 9 => Class 150 Other _____________________________________ Working Pressure @ 20C 10 bar (std.) Specify____________________________________ PIPING MATERIALS Standard
Main line: Carbon steel, galv. Supply line: PE-X Sight flow indicator: Bronze In/Out valve: Bronze Option: SS
Design according to API 610 Main line: Carbon steel, galv. Supply line: SS Sight flow indicator: Bronze Option: SS In/Out valve: Bronze Option: SS
PIPING CONNECTIONS @ main line9 => f-NPT (std.)
Other ______________
Option: flanges, 150 RF (SS)
CERTIFICATION 9 => C of C (E29B02)(1) CMTR (E29A02)(2) Other________________________________ Notes: (1) Certificate of Compliance (2) Inspection Certificate 3.1B (3) Jacket cooling not available for sizes 100-300 up to 200-400 (design without cooling chamber)