MClamp Manual Clamping System

HEMA MClamp range

MClampClamping System

HEMA Maschinen- und Apparateschutz GmbHSeligenstädter Straße 82, D-63500 SeligenstadtPhone: +49(0)6182/773-0, Fax: +49(0)6182/773-35info@hema-group.com, www.hema-group.com

The MClamp supplements the HEMA pneumatic railclamps with a manually operated clamping element withhigh retaining forces.The H shaped cross section of the clamping body cor-responds to the body of the HEMA LinClamp elements, i.e.the clamping function and the automatic return on releaseare based on the same principles as the LinClamp Seriesthat has been tried and tested thousands of times. Four tapped holes enable easy fitting and universal compatibility.

Advantages of MClamplow cost entry level rail clamp version4 tapped holes for easy fitting, universally compatiblehigh axial stiffnessreliable clamping with max retaining forces of 2000 Nsuitable for all manual clamping jobs, e.g. for positioningagainst stops, transport locks, securing workingpositions at jigs and assembly stations, etc.precise positioning without affecting longitudinal ortransverse forces on the rail; the clamping forces alwaysact vertically to the rail axis and are transferredsymmetricallyextremely flexible applications - for virtually all rail andguide carriage typescompact design, easy to install, easy to operateoperated with Allen key and torque wrench or alterna-tively with a manual clamping lever

*H corresponds to the rail manufacturer's low carriage; when higher ones are used, spacer plates must be provided.All dimensions in mm if not marked otherwise. Errors and omissions excepted.

B

C M

L

H

AH

1 L1

Dimensions MClamp Manual clamping lever for MClamp

2411

2014

Rail B L H* H1 A L1 C M max. tightening torque holding forcesize [Nm] [N]

MClamp 15 47 23 24 15 3,2 17 17 M4 3,5 900MClamp 20 59 24 30 19 4 15 15 M6 4,5 1000MClamp 25 69 30 36 22 5 20 20 M6 7,5 1100MClamp 30 84 35 42 26 5,3 22 22 M6 10,0 1100MClamp 35 96 35 48 31 6,5 24 24 M8 11,0 2000