1Electrical and Computer Engineering

2010

ARIS..............................................................................................................................1

Electrical Engineering Alexander:FundamentalsofElectricCircuits,4/e........................................................2 Hayt:EngineeringCircuitAnalysis,7/e.........................................................................3 Jaeger:MicroelectronicCircuitDesign,4/e..................................................................4 Neamen:Microelectronics,4/e.....................................................................................5 Hayt:EngineeringElectromagnetics,7/e......................................................................6 Mitra:DigitalSignalProcessing,4/e.............................................................................7 Roberts:FundamentalsofSignalsandSystems,1/e...................................................8 Roberts:SignalsandSystems,1/e................................................................................... 8 Chapman:ElectricMachineryFundamentals,4/e........................................................9 Fitzgerald:ElectricMachinery,6/e................................................................................9 Frenzel:PrinciplesofElectronicCommunicationSystems,3/e.................................10 Carlson:CommunicationSystems,5/e.......................................................................10 Palm:AConciseIntroductiontoMATLAB,1/e............................................................ 11 Palm:IntroductiontoMATLABforEngineering,3/e................................................... 11

Computer Engineering Brown:FundamentalsofDigitalLogicwithVHDLDesign,3/e..................................12 Marcovitz:IntroductiontoLogicDesign,3/e...............................................................13 Marcovitz:IntroductiontoLogicandComputerDesign,1/e.......................................13 Kang:CMOSDigitalIntegratedCircuits,3/e...............................................................14 Ravazi:DesignofAnalogCMOSIntegratedCircuits,1/e...........................................14 Neamen:AnIntroductiontoSemiconductorDevices,1/e...........................................15 Ford:DesignforElectricalandComputerEngineers,1/e...........................................15 Eide:Engineering:FundamentalsandProblemSolving,5/e......................................16 Musto:EngineeringComputations,1/e........................................................................... 16 Martin:IntroductiontoEngineeringEthics,2/e...........................................................16 Rizzoni:FundamentalsofElectricalEngineering,1/e.................................................16 Schultz:GrobsBasicElectronics,11/e.......................................................................16 Tokheim:DigitalElectronics,7/e.................................................................................16 Malvino:ElectronicPrinciples,7/e..............................................................................16 Fowler:Electricity,7/e.................................................................................................16 Gopal:ControlSystems,2/e.......................................................................................17 Kasap:PrinciplesofElectronicMaterialsandDevices,3/e........................................17 Kelton:SimulationwithArena,5/e..............................................................................17 Proakis:DigitalCommunications,5/e.........................................................................17 Peebles:Probability,RandomVariables,andRandomSignalPrinciples,4/e............17 Hart:PowerElectronics,1/e.......................................................................................17 Saadat:PowerSystemAnalysis,2/e..........................................................................17 Leon-Garcia:CommunicationNetworks,2/e..............................................................17 McGraw-HillBEST-BasicEngineeringSeriesandTools............................................17

Table of Contents

www.successinhighered.com We are pleased to announce the launch of the McGraw-Hill Higher Education Success sites. These sites will provide you with a consistent, one-stop shop, for finding new Science, Engineering, and Math titles, accompanying digital offerings, related marketing webinars/events, and seasonal promotions.

To checkout all subject-specific success sites, go to www.successinhighered.com and find out how you and your students can prepare for success in the course!

NEW

NEW

NEW

NEW

NEW

NEW

NEW

1Assessment, Review, and Instruction System, also known as ARIS, is anelectronic homework and course management system designed for greaterflexibility,power,andeaseofusethananyothersystem.Whetheryouarelookingforapreplannedcourseoroneyoucancustomizetofityourcourseneeds,ARISisyoursolution.

Youmaybeaskingyourself,WhyshouldIuseanelectronichomeworksystem?WhyARIS? Simply stated,ARIS provides instructors with a complete coursemanagementfreedomto:

Go beyond the limits of print: Studentshave24-houraccesstopracticesetsandsmarttutorialfeedbacktomastercurriculargoals.Somecoursespractice sets can be algorithmically generated providing virtually unlimited practice.Studentsalsohaveaccesstoanimations,videosandsimulations.

Spend more time teaching: Tired of spending most of your time creating and gradinghomework?WithARIS, buildingquizzes, homework assignments, tests, etc. is only afewclicksaway.Ifyoudontwanttocreateyourowncontentyoucanalsochoosepre-builtassignmentsorimportcontentfromothersources,includingWebCTandBlackboard.Andofcourse,assignments are automatically graded.Youmayneverneedtogradehomeworkagain!

Know exactly where your students stand: ARIS gradebook functionality is extremelyversatileandallowsyoutomanipulate data with different views and sorts to track student progress.Viewstudent scores in real-time, identifyareaswhere theyarestruggling,andbuildyourassignmentsandlectureaccordingly.

Control the communication and content of your course:EnhanceyourcommunicationwithstudentsviaARISthroughpostingannouncements,attachingdocuments,hostingchatsessions,andemail.Easilycontrolthedirectionofyourcourseandmakesureotherinstructors,adjuncts,parttimers,andTAsareonthesamepagebycreatingamastersyllabus.

www.mharis.com

2Table of contentsPart 1: DC Circuits 1: Basic Concepts 2: Basic Laws 3: Methods of Analysis 4: Circuit Theorems 5: Operational Amplifiers 6: Capacitors and Inductors 7: First-Order Circuits 8: Second-Order CircuitsPart 2: AC Circuits 9: Sinusoids and Phasors

10: Sinusoidal Steady-State Analysis 11: AC Power Analysis 12: Three-Phase Circuits 13: Magnetically Coupled Circuits 14: Frequency ResponsePart 3: Advanced Circuit Analysis 15: Introduction to the Laplace Transform 16: Applications of the Laplace Transform 17: The Fourier Series 18: Fourier Transform 19: Two-Port Networks

The fourth edition of Fundamentals of Electric Circuitscontinues in thespiritof itssuccessfulpreviouseditions,with the objective of presenting circuit analysis in amannerthat isclearer, more interesting, and easier to understand than other, more traditional texts. Studentsare introduced to the sound, six-step problem solvingmethodology in chapter one, and are consistentlymadetoapplyandpracticethesestepsinpracticeproblemsandhomeworkproblemsthroughoutthetext.

Features Design a problem is a new feature the authors haveintroduced to help students enhance skills that are animportantpartofthedesignprocess.

Over 300 new homework problems havebeenadded tothenewedition,withover1800totalproblemsprovidedinthetext.

The six-step problem solving methodology isintroducedin chapter one and carried throughout the text andmediasupplementstopromotesoundproblem-solvingpractices.

Each illustrative example is immediately followed by apractice problem and answer to test understanding of theprecedingexample.

Extended examples in each chapter show an exampleproblem worked using a detailed outline of the six-stepmethodsostudentscanseehowtopracticethistechnique.

PSpice and MATLAB are integrated throughout the text,withtutorialsincludedintheappendix.

Knowledge Capturing Integrated Design Environment (KCIDE) software provided on theOnline LearningCenterleads students through end of chapter problems using thesix-stepproblemsolvingmethod,andkeepsarecordforhowproblemsaresolvedsostudentscanshareandchecktheirwork.

ARIS: McGraw-HillsonlinehomeworkmanagementsystemoffersinstructorsSolutions,inbothMSWordandCOSMOSformats, and PowerPoint slides. And, it offers studentseProfessorVideos,AlgorithmicProblems,aProblemSolvingWorkbook, Network Analysis Tutorials, FE Exam ReviewMaterial,aPSpiceManual,anextrachapteronState-VariableAnalysis,andtextupdates.

Enhancing Your Skills and Enhancing Your Career chapter openersprovidediscussionsabouthowtoenhanceskillsthatcontributetosuccessfulproblem-solvingandcareer-oriented talks on a sub-discipline of electrical engineeringto give students a sense of the real-world applications ofelectricalengineering.

Fundamentals of Electric Circuits, 4/e

Charles K. Alexander, ClevelandStateUniversity Matthew N.O. Sadiku, PrairieViewA&MUniversitywww.mhhe.com/alexander 2009 978-0-07-127238-4 1,056 pages

Ele

ctr

ica

l E

ng

ine

eri

ng

3Table of contents1: Circuit Analysis and Electrical Engineering 2: Basic Components and Electric Circuits 3: Voltage and Current Laws 4: Basic Nodal and Mesh Analysis 5: Useful Circuit Analysis Techniques 6: The Operational Amplifier 7: Capacitors and Inductors 8: Basic RL and RC Circuits 9: The RLC Circuit 10: Sinusoidal Steady State Analysis 11: AC Power Circuit Analysis

12: Polyphase Circuits 13: Magnetically Coupled Circuits 14: Complex Frequency and The Laplace Transform 15: Circuit Analysis in the s-Domain 16: Frequency Response 17: Two-Port Networks 18: Fourier Circuit Analysis 19: State-Variable Analysis--*on Web Site Only

Supplements978-0-07-298465-1(COSMOSCD)

Thehallmarkfeatureofthisclassictextisits focus on the studentitiswrittensothatstudentsmayteachthescienceofcircuitanalysistothemselves.Termsareclearlydefinedwhentheyareintroduced.Simplepracticeproblemsappearthroughout each chapter, while more difficult problemsappear at the ends of chapters, following the order ofpresentationoftextmaterial.Haytsrichpedagogysupportsand encourages the student throughout by offering tipsandwarnings,usingdesign tohighlight keymaterial, andprovidinglotsofopportunitiesforhands-onlearning.

Features A new, full-color design has been implementedthroughout.

The Practical Applications boxes throughout the bookconnectmaterialtoreal-worldsituationsandtieinconceptsofdesignandproblem-solving.

Many basic level, confidence building, end-of-chapter exercises havebeenadded.

Manynew examples havebeenadded.

Additional photographs have been included, as well asmorelinedrawingswhereneededtoprovideclarity.

PSpice coverage hasbeenthoroughlyupdatedforthenewedition.

Problem-solving techniques areintroducedinChapterOnetopreparestudentsfordevelopingamethodicalapproachtocircuitanalysis.Thestep-by-stepapproach isused ineachsubsequent chapter, with a carefully selected example ineachchapterre-statingtheproblem-solvingmethodologyasaremindertothestudents.

Design-oriented questions appearattheendsofselectedchapterstohelpstudentsgraspthecomplexitiesofthedesignprocess.

ARIS: McGraw-HillsonlinehomeworkmanagementsystemoffersinstructorsSolutions,inbothMSWordandCOSMOSformats, and PowerPoint slides. And, it offers studentseProfessorVideos,AlgorithmicProblems,aProblemSolvingWorkbook, Network Analysis Tutorials, FE Exam ReviewMaterial,aPSpiceManual,anextrachapteronState-VariableAnalysis,andtextupdates.

AFundamentals of Engineering Examination AppendixhelpspreparestudentsfortheFE/EITexam.

The Online Learning Center offers students eProfessorVideos,AlgorithmicProblems,aProblemSolvingWorkbook,Network Analysis Tutorials, FE Exam Review Material, aPSpiceManual,anextrachapteronState-VariableAnalysis,and text updates. And for instructors the site providesSolutionsandPowerPointslides.

AC.O.S.M.O.S. Solutions Manual, provided to instructorson DVD, allows for assignment generation, tracking, anddistribution.Instructorsalsohavetheabilitytoedithomeworkproblems.

Engineering Circuit Analysis, 7/e

William H. Hayt, Jr., (deceased)Jack E. Kemmerly, (deceased) Steven M. Durbin, UniversityofCanterbury,NewZealandwww.mhhe.com/hayt7e2007 978-0-07-110669-6 800 pages

Ele

ctr

ica

l E

ng

ine

eri

ng

4Table of contentsPart 1: Solid State Electronics and Devices 1:IntroductiontoElectronics2: Solid-State Electronics 3: Solid-State Diodes and Diode Circuits 4: Field-Effect Transistors 5: Bipolar Junction TransistorsPart 2: Digital Electronics 6: Introduction to Digital Electronics 7: Complementary MOS (CMOS) Logic Design 8: MOS Memory and Storage Circuits 9: Bipolar Logic Circuits

Part 3: Analog Electronics 10: Analog Systems and Ideal Operational Amplifiers 11: Nonideal Operational Amplifiers and Feedback Amplifier

Stability 12: Operational Amplifier Applications 13: Small-Signal Modeling and Linear Amplification 14: Single Transistor Amplifiers 15: Differential Amplifiers and Operational Amplifier Design 16: Analog Integrated Circuit Design Techniques 17: Amplifier Frequency Response 18: Transistor Feedback Amplifiers and Oscillators

Jaeger/Blalock present a balanced coverage of analoganddigitalcircuits;studentswilldevelopacomprehensiveunderstandingofthebasictechniquesofmodernelectroniccircuitdesign,analoganddigital,discreteandintegrated.AbroadspectrumoftopicsareincludedinMicroelectronic Circuit Design, 4/ewhichgivestheprofessortheoptiontoeasilyselectandcustomizethematerialtosatisfyatwo-semester or three-quarter sequence in electronics.Jaeger/Blalock emphasizes design through the use ofdesignexamplesanddesignnotes.Excellentpedagogicalelements include chapter opening vignettes, chapter objectives, Electronics in Action boxes, a problem-solving methodology, and Design Note boxes.Theuse of the well-defined problem-solving methodologypresented in this text can significantly enhance anengineersabilitytounderstandtheissuesrelatedtodesign.Thedesignexamplesassistinbuildingandunderstandingthedesignprocess.

Features Several new Design Note boxes: Themathematicalmodelfor the NMOS transistor and the PMOS transistor; TheQ-PointvaluesfortheMOStransistorusingthefour-resistorbiasnetwork.

Several new Electronics in Action boxes: HighPerformanceCMOStechnologies;DiodeRectifierasanAMDemodulation;ASecondLookatNoiseMargins (graphicalflip-flopapproach);OffsetVoltage,BiasCurrentandCMPRMeasurement;Sample-and-HoldCircuits,VoltageRegulatorwithSeriesPassTransistor;NoiseFactor,NoiseFigureandMinimum Detectable Signal; Series-Parallel and Parallel-SeriesNetworkTransformations;andPassiveDiodeMixers.

Numerous new End of Chapter problems have beenaddedtoeachchapter.

Emphasis on design: Design Examples and DesignNotes highlight real-world design principles encouragingstudentstoconcentrateondesign.

Problem-solving methodology:Ineachchaptertheauthorsapproachproblemsolving inaconsistentmanner,showingstudentshowtoconsideraproblem,breakitdown,andfindaneffective,efficientsolution.

ARIS: McGraw-Hills electronic homework managementsystem provides tools for both instructors and students.Studentswillappreciatehavingover450problemstouseforpractice.

Microelectronic Circuit Design, 4/e

Richard C. Jaeger, AuburnUniversity Travis N. Blalock, UniversityofVirginiawww.mhhe.com/jaeger2010 978-0-07-122199-3 1,184 pages

Ele

ctr

ica

l E

ng

ine

eri

ng

NEW

5Table of contentsPart 1: Semiconductor Devices and Basic Applications 1: Semiconductor Materials and Diodes 2: Diode Circuits 3: The Field-Effect Transistor 4: Basic FET Amplifiers 5: The Bipolar Junction Transistor 6: Basic BJT Amplifiers 7: Frequency Response 8: Output Stages and Power Amplifiers

Part 2: Analog Electronics 9: Ideal Operational Amplifiers and Op-Amp Circuits 10: Integrated Circuit Biasing and Active Loads 11: Differential and Multistage Amplifiers 12: Feedback and Stability 13: Operational Amplifier Circuits 14: Nonideal Effects in Operational Amplifier Circuits 15: Applications and Design of Integrated CircuitsPart 3: Digital Electronics 16: MOSFET Digital Circuits 17: Bipolar Digital Circuits

Microelectronics: Circuit Analysis and Design, 4/e isintendedasacore text inelectronics forundergraduateelectricalandcomputerengineeringstudents.The fourtheditioncontinuestoprovideafoundationforanalyzinganddesigningbothanaloganddigitalelectroniccircuits.Thegoal hasalwaysbeen tomake this bookvery readable and student friendly.

Features Flexible Presentation of Key Topics: Revisions havegiven the text a level of flexibility such that ideal op-amps(Chapter9)canbepresentedasthefirsttopicinelectronics;either MOS or Bipolar transistors can be studied as thefirst transistor type; and digital electronics can be coveredbeforeanalogelectronics.Thisflexibilityallowsinstructorstopresenttopicsinwhateverordermakesthemostsensefortheirstudents.

New Problems: Over 45 percent new exercise and TestYour Understanding Problems; over 45 percent new end-of-chapterproblems;andover70percentnewopen-endeddesignproblemsandcomputersimulationproblems.

Goal-Oriented Pedagogy: - A Preview section introduceseachchapterandcorrelateswithlearningobjectivesthatheadeachsection.

- Worked examples reinforce the theoretical conceptsbeingdeveloped;allexamplesare followedbyexercisestoimmediatelytestlearning.

- Test Your Understanding problems areintegratedattheendofeachsectiontoprovideadditionalpractice.

- Problem solving techniques guide students throughanalyzingandsolvingaproblem.

Focus on Design in the Real World: Studentsare taughtgood design by incorporating design exercises that helpstudentsgetafeelforhowthedesignprocessworksintherealworld.- Each chapter includes aDesign Application that leadsstudents through the design and development of anelectronic thermometer. The various characteristics andpropertiesofcircuitsareexplainedasthestudentmovesthroughtheanalysis.

- Design Pointers appearinexamplesandthroughoutthetexttohelpstudentswithtrickydesignissues,andDesign Problems arefeaturedinmostproblemsets.

Computer Tools: Becausecomputeranalysisandcomputer-aideddesignaresignificantfactorsinprofessionalelectronicdesign, the text contains a largenumber of newcomputersimulation problems. These appear both throughout thechapterandattheendofeachchapter.

Microelectronics: Circuit Analysis and Design, 4/e

Donald A. Neamen, UniversityofNewMexico-Albuquerquewww.mhhe.com/neamen

2010 978-0-07-128947-4 1,392 pages

Ele

ctr

ica

l E

ng

ine

eri

ng

NEW

6Table of contents1: Vector Analysis 2: Coulombs Law and Electric Field Intensity 3: Electric Flux Density, Gausss Law, and Divergence 4: Energy and Potential 5: Current and Conductors 6: Dielectrics and Capacitance 7: Poissons and Laplaces Equations 8: The Steady Magnetic Field 9: Magnetic Forces, Materials, and Inductance

10: Time-Varying Fields and Maxwells Equations 11: Transmission Lines 12: The Uniform Plane Wave 13: Plane Wave Reflection and Dispersion 14: Guided Waves and Radiation

Supplements978-0-07-308014-7(COSMOSCD)

Engineering Electromagneticsisaclassic book that has been updated for electromagnetics in todays world.Itisdesignedforintroductorycoursesinelectromagneticsorelectromagneticfieldtheoryatthejunior-level,butcanalsobeusedasaprofessionalreference.Thiswidelyrespectedbookstresses fundamentals and problem solving and discusses the material in an understandable, readable way.Numerousillustrationsandanalogiesareprovidedtotheaidthereaderingraspingdifficultconcepts.Inaddition,independentlearningisfacilitatedbythepresenceofmanyexamplesandproblems.

Features Thebookcomespackagedwith an extensive multi-media

CD-ROM.

The material is more than adequate for a one-semester course.Professorscanomitportionsofsomeofthechaptersdependingontheinstructionallevel.

The book has an expanded Web site which includes thesolutionsmanual(forinstructorsonly),downloadableJPEGfiles of the figures, as well as other helpful student andinstructorresources.

Thebookhasbeenwrittenwiththegoalofmakingitaseasyaspossible for the student to learn independently.

Acarefully graduate scale of difficulty within each chapter andamongthechaptersthemselves.

Provides numerical examples, a large number of drill problems with answers, as well as end-of-chapter problems.

New sections on microstrip lines and optical fibers inthewaveguideschapter.

Re-positioningofthe transmission lines chapter ahead of the plane waves chapter.

Thetransmissionlineschapterhasalsobeenre-writtenandexpandedsothatitcan be used at any point in the course outline.Also,thetopicoftransmissionlineslosseshasbeenaddedtothetransmissionlineschapter.

C.O.S.M.O.S: Contains the entire book problem set,enhanced to include any referenced images or text, aswellastheentiresolutionsetforthebook.Inaddition,thisapplicationhelpsinstructorstoorganize,distribute,andtrackproblemsetsfromthetextbook.

The book hasan expanded Web site which includes thesolutionsmanual(forinstructorsonly),downloadableJPEGfiles of the figures, as well as other helpful student andinstructorresources.

Engineering Electromagnetics, 7/e

William H. Hayt, Jr., (deceased)John A. Buck,GeorgiaInstuteofTechnologywww.mhhe.com/haytbuck72006 978-0-07-124449-7 608 pages

Ele

ctr

ica

l E

ng

ine

eri

ng

7Ele

ctr

ica

l E

ng

ine

eri

ng

Table of contents1: Signals and Signal Processing 2: Discrete-Time Signals in the Time Domain 3: Discrete-Time Signals in the Frequency Domain 4: Discrete-Time Systems 5: Finite-Length Discrete Transforms 6: z-Transform 7: LTI Discrete-Time Systems in the Transform Domain

8: Digital Filter Structures 9: IIR Digital Filter Design 10: FIR Digital Filter Design 11: DSP Algorithm Implementation 12: Analysis of Finite Wordlength Effects 13: Multirate Digital Signal Processing Fundamentals 14: Multirate Filter Banks and Wavelets

Digital Signal Processing: A Computer-Based Approach is intended fora two-semester course ondigital signalprocessing for seniors or first-year graduate students.The prerequisite for this book is a junior-level course inlinearcontinuous-timeanddiscrete-timesystems,whichisusuallyrequiredinmostuniversities.Akeyfeatureofthisbook is theextensiveuseofMATLAB-based examples that illustrate the programs powerful capability to solvesignal processing problems. Practical examples andapplications bring the theory to life. This popular bookintroduces the tools used in the analysis and design ofdiscrete-timesystemsforsignalprocessing.

Features Discussion of additional time-domain algorithms usedmostly in speech processing along with the MATLABprogramsimplementingthesealgorithms.

Computer programs in each chapter except Chapter 1.Thecomputerprojectsolutionscanbefoundontheinstructorsideofthewebsite.

MATLAB-based examples are used to demonstrate itspowerful capability for solving signal processing problems.Thisisahallmarkfeatureofthisbook.Thetextincludesmorethan150MATLABprogramsandcodefragmentsaswellasover 150 exercises.The fourth edition containsmany newandupdatedMATLABexamples.

Inclusion of extensive simple, but practical examplesthatexpose the reader to real-life signal processing problems,whichhasbeenmadepossibleby theuseofcomputers insolvingpracticaldesignproblems.ExamplesremovedfromthethirdeditiontextcanbefoundontheaccompanyingCD.

An accompanying CDcontainsalloftheMATLABprograms.It also has files of real signals, reviewmaterial, additionalexamples,asetof frequentlyaskedquestions,andashorttutorialonMATLAB.

Digital Signal Processing: A Computer-Based Approach, 4/e

Sanjit K. Mitra, UniversityofCalifornia-SantaBarbarawww.mhhe.com/mitra

2010 978-0-07-128946-7 992 pages

NEW

3/e cover

8Fundamentals of Signals and Systemscapturesthemathematical beautyofsignalsandsystemsandoffersastudent-centered, pedagogically driven approach.Theauthorhasaclearunderstandingoftheissuesstudentsfaceinlearningthematerialanddoesasuperiorjobofaddressingtheseissues.Thebookisintendedtocoveraone-semestersequenceinSignalsandSystemsforjuniorsinengineering.

Features The new brief version of Roberts is somewhat shorter than the comprehensiveversionand,mostimportantly,hasbeenmodularizedtoallowreducedtopiccoveragewithoutlossofcontinuity.

Thisversionincludesmany exciting new examples withapracticalflavor. Roberts continues to offer alternating parallel coverage of continuous-time anddiscrete-timesignalsandsystems.

Robertsincludesunified and consistent notation for all transform methodstoaidretentionandunderstandingofrelationsamongtransformmethods.

Since MATLAB is key to many Signals and Systems courses, a large number of MATLAB examples and a comprehensive Appendix on the important MATLABoperatorsandfunctionsusedinsignalandsystemanalysishavebeenincluded.

ARIS: McGraw-HillselectronichomeworksolutionaccompaniesthebookandfeaturessuchthingsassolutionsandPowerPointsforinstructors,andconceptsimulatorsandalgorithmicproblemsforstudents.

Fundamentals of Signals and Systems

M.J. Roberts, UniversityofTennessee-Knoxville

www.mhhe.com/roberts2008 978-0-07-331660-4 800 pages

Thistextoffersastudent-centered, pedagogically driven approachtoteachingSignalsandSystems.Theauthorhasaclearunderstandingoftheissuesstudentsfaceinlearningthematerialanddoesasuperiorjobofaddressingtheseissues.Thebookisintendedtocoveratwo-semestersequenceinSignalsandSystemsforJuniorsinengineering.

Features Comprehensive coverage ofallbasicsignalandsystemtopicsandanalysismethods. Extensive examplesillustratingalltopics. Many MATLAB examplesandacomprehensiveAppendixontheimportantMATLAB

operators and functions used in signal and system analysis. More than 500 exercisesincludingdrillexerciseswithanswersandmorechallengingproblemswithoutanswers.

Signals and Systems: Analysis Using Transform Methods and MATLAB

M.J. Roberts, UniversityofTennessee-Knoxville

www.mhhe.com/roberts2004 978-0-07-123268-5 1,054 pages

Table of contents1: Introduction2: Mathematical Description of Continuous-Time Signals3: Mathematical Description of Discrete-Time Signals4: Properties of Continuous-Time Systems5: Properties of Discrete-Time Systems6: Time-Domain Analysis of Continuous-Time Systems7: Time-Domain Analysis of Discrete-Time Systems8: The Continuous-Time Fourier Series9: The Discrete-Time Fourier Series

10: The Continuous-Time Fourier Transform11: The Discrete-Time Fourier Transform12: Continuous-Time Fourier Transform Analysis of Signals and

Systems13: Discrete-Time Fourier Transform Analysis of Signals and Systems14: Sampling and the Discrete Fourier Transform15: The Laplace Transform16: The z Transform

Table of contents1: Introduction2: Mathematical Description of Signals3: Description and Analysis of Systems4: The Fourier Series5: The Fourier Transform6: Fourier Transform Analysis of Signals and Systems

7: Sampling and the Discrete Fourier Transform8: Correlation, Energy Spectral Density, and Power Spectral Density9: The Laplace Transform10: Laplace Transform Analysis of Signals and Systems11: The z Transform12: z-Transform Analysis of Signals and Systems

Ele

ctr

ica

l E

ng

ine

eri

ng

9Table of contents1: Introduction to Machinery Principles 2: Transformers 3: Introduction to Power Electronics 4: AC Machinery Fundamentals 5: Synchronous Generators

6: Synchronous Motors 7: Induction Motors 8: DC Machinery Fundamentals 9: DC Motors and Generators 10: Single-Phase and Special-Purpose Motors

Electric Machinery Fundamentals, 4/econtinuestobeabest-sellingmachinerytextdueto its accessible, student-friendly coverage of the important topics in the field.Chapmansclearwritingpersistsinbeingoneofthetopfeaturesofthebook.AlthoughnotabookonMATLAB, theuseofMATLABhasbeenenhanced in the fourthedition.Chapmanhasalsoaddedsomenewapplications,aswellasmanynewproblemshavebeenadded.

Features Many new problems and examples areincluded. AC machines are emphasized overDCmachines. Flexible topic coverage allowseitherACorDCmaterialtobecoveredfirst. MATLAB is incorporatedinexamples,sampleproblems,andhomeworkproblems. Revised homework problems.

Electric Machinery Fundamentals, 4/e

Stephen J. Chapman, BAESystems-Australia

www.mhhe.com/chapman2005 978-0-07-115155-9 768 pages

TheexcitingnewsixtheditionofElectric Machineryhasbeenextensivelyupdatedwhileretaining theemphasison fundamentalprinciplesandphysicalunderstanding thathasbeentheoutstandingfeatureofthisclassicbook.Thisbookis intendedtoserveasanintroduction to electric machinery and electromechanics,andhasbeenexpandedtoincludeanintroductiontopowerelectronicsandmachinecontrol.Itcontainsnot only the fundamentals, but also some more rigorous materialforthoseinstructorswantingtocovermoreadvancedtopics,andcanbeusedatboththeundergraduateandgraduatelevel.

Features Eachchapterincludes quantitative examples toillustrateimportantconcepts.

The popular interactive computer software MATLAB hasbeenintroducedintheneweditioninbothexamplesandpracticeproblems.

The website includes a downloadable version of the solutionsmanual, password-protectedforinstructors.Thewebsitealsoservesasasourceforadditionalexamples,problemsandMATLABexamples.ItalsocontainsasetofPowerPointslidesoffiguresfromthebookforinstructorstouseintheirlectures.

Electric Machinery, 6/e

A. E. Fitzgerald, (deceased) Charles Kingsley, Jr., (deceased) Stephen D. Umans, MassachusettsInstituteofTechnology

www.mhhe.com/fitzgerald2003 978-0-07-123010-0 704 pages

Table of contents1: Magnetic Circuits and Magnetic Materials 2: Transformers 3: Electromechanical Energy Conversion Principles 4: Introduction to Rotating Machines 5: Synchronous Machines 6: Polyphase Induction Machines

7: DC Machines 8: Variable-Reluctance Machines and Stepping Motors 9: Single- and Two-Phase Motors 10: Introduction to Power Electronics 11: Speed and Torque Control

Ele

ctr

ica

l E

ng

ine

eri

ng

10

Principles of Electronic Communication Systems 3/e providesthemostup-to-datesurveyavailableforstudentstakingafirstcourseinelectroniccommunications.Requiringonlybasicalgebraand trigonometry, thenewedition isnotable for its readability, learning features and numerous full-color photos and illustrations.A systems approach isusedtocoverstate-of-the-artcommunicationstechnologies,tobestreflectcurrentindustrypractice.ThiseditioncontainsgreatlyexpandedandupdatedmaterialontheInternet,cellphones,andwirelesstechnologies.

Features New streamlined book design usedtohighlightlearningfeatures,four-colorartfiguresandphotographs.

An all-new Laboratory & Activities Manual isavailable,withhands-onlabs,simulationroutines,andawiderangeofactivities.

Principles of Electronic Communication Systems, 3/e

Louis E. Frenzel Jr., ElectronicDesignMagazine

www.mhhe.com/frenzel3e2008 978-0-07-110607-8 960 pages

ThisexcitingrevisionofCommunication Systemspresentsanintroduction to electrical communication systems, including analysis methods, design principles, and hardware considerations.Thefiftheditionhasbeenupdatedtoreflectcurrenttechnologyin this ever-evolving field. The text covers both analog and digital communications. Itfeaturesworkedexamplesandexercises forstudents tosolvewithinchapters,helpingthemtomasternewconceptsastheyareintroduced.

Features Expanded coverage of DSL (digitalsubscriberline)includingADSLandISDN;SONET,ComputerNetworks, includingOSIandTCP/IPprotocolsanddataencryption;digitalaudiorecording,HDTVandreceivers;andturbocoding,trelliscodedmodulationandupdatedandexpandedtreatmentofconvolutionalcoding.

The end matter includesanewlistofabbreviationsandmathsymbols. New worked out examples and end-of-chapter problemshavebeenaddedtofurtherupdatethebooks.

Communication Systems: An Introduction to Signals and Noise in Electrical Communication, 5/e

A. Bruce Carlson, RensselaerPolytechInstitutePaul B. Crilly, UniversityofTennessee-Knoxville

www.mhhe.com/carlsoncrilly2009 978-0-07-126332-0 944 pages

Table of contents1: Introduction to Electronic Communication2: The Fundamentals of Electronics: A Review3: Amplitude Modulation Fundamentals4: Amplitude Modulator and Demodulator Circuits5: Fundamentals of Frequency Modulation6: FM Circuits7: Digital Communications Techniques8: Radio Transmitters9: Communications Receivers10: Multiplexing and Demultiplexing11: Data Transmission Techniques12: Introduction to Networking and Local Area Networks13: Transmission Lines

14: Antennas and Wave Propagation15: Internet Technologies16: Microwave Communications17: Satellite Communications18: Telecommunication Systems19: Optical Communication20: Cell Phone Technologies21: Wireless Technologies22: Communication Tests and Measurements

Supplements978-0-07-310705-9(ExperimentsManual)

Table of contents1: Introduction2: Signals and Spectra3: Signal Transmission and Filtering4: Linear CW Modulation5: Exponential CW Modulation6: Sampling and Pulse Modulation7: Analog Communication Systems8: Probability and Random Variables9: Random Signals and Noise

10: Noise in Analog Modulation Systems11: Baseband Digital Transmission12: Digitization Techniques for Analog Messages and Computer

Networks13: Channel Coding and Encryption14: Bandpass Digital Transmission15: Spread Spectrum Systems16: Information and Detection Theory

Ele

ctr

ica

l E

ng

ine

eri

ng

11

Introduction to MATLAB for Engineers, 3/eisasimple,concisebookdesignedtobeusefulforbeginnersand tobekeptasa reference.MATLAB isagloballyavailablestandardcomputationaltoolforengineersandscientists.Theterminology, syntax, and the use of the programming language are well defined,andtheorganizationof thematerialmakesiteasytolocateinformationandnavigatethroughthetextbook.ThetextcoversallthemajorcapabilitiesofMATLABthatareusefulforbeginningstudents.

Features Numerous examples and homework problems drawn from all the fields ofengineering.

Studentscanuse the textasareference in latercoursesbecause itcontainsmanytablesthatsummarizetheMATLABcommands.

Expanded coverage of programming includes structured programming and logicalvariables.

AfullchaptercoveringSimulink. Thetextiswrittenandusesmathematicsappropriateforthe freshman level.

Introduction to MATLAB for Engineers, 3/e

William J. Palm III, UniversityofRhodeIsland

www.mhhe.com/palm2010 978-0-07-353487-9 704 pages

Table of contents1: An Overview of MATLAB 2: Numeric, Cell, and Structure Arrays 3: Functions and Files 4: Decision-Making Programs 5: Advanced Plotting 6: Model Building and Regression

7: Linear Algebraic Equations 8: Probability, Statistics, and Interpolation 9: Numerical Methods for Calculus and Differential Equations 10: Simulink 11: MuPAD

Ele

ctr

ica

l E

ng

ine

eri

ng

A simple concise book designed to cover all themajor capabilities ofMATLAB thatare useful for beginning students. MATLAB is presently a globally available standardcomputationaltoolforengineersandscientists.Theterminology,syntax,andtheuseoftheprogramminglanguagearewelldefinedandtheorganizationofthematerialmakesiteasytolocateinformationandnavigatethroughthetextbook.

Features Thorough coverage of Function handles,Anonymous functions, Subfunctions andApplicationsincludingplotting,programming,statisticsandmodelbuilding.

Numerous examplesandhomeworkproblemsdrawnfromallengineeringfields. Mathematicsisattheappropriatelevelfor freshman engineering students.

A Concise Introduction to MATLAB

William J. Palm III, UniversityofRhodeIsland

www.mhhe.com/palm2008 978-0-07-126372-6 448 pages

Table of contents1: An Overview of MATLAB 2: Numeric, Cell, and Structure Arrays 3: Functions and Files 4: Decision-Making Programs

5: Advanced Plotting and Model Building 6: Statistics, Probability, and Interpolation 7: Numerical Methods for Calculus and Differential Equations 8: Symbolic Processing

NEW

12

Co

mp

ute

r E

ng

ine

eri

ng

Table of contents1: Design Concepts 2: Introduction to Logic Circuits 3: Implementation Technology 4: Optimized Implementation of Logic Functions 5: Number Representation and Arithmetic Circuits 6: Combinational-Circuit Building Blocks

7: Flip-Flops, Registers, Counters, and a Simple Processor 8: Synchronous Sequential Circuits 9: Asynchronous Sequential Circuits 10: Digital System Design 11: Testing of Logic Circuits 12: Computer Aided Design Tools

Fundamentals of Digital Logic with VHDL Design teachesthe basic design techniques for logic circuits. The textprovides a clear and easily understandable discussionof logic circuit design without the use of unnecessaryformalism.It emphasizes the synthesis of circuits and explains how circuits are implemented in real chips.Fundamental concepts are illustrated by using smallexamples,whichareeasytounderstand.Then,amodular approachisusedtoshowhowlargercircuitsaredesigned.VHDL is a complex language so it is introduced gradually in the book.EachVHDLfeature ispresentedas it becomespertinent for the circuits beingdiscussed.WhileitincludesadiscussionofVHDL,thebookprovidesthorough coverage of the fundamental concepts of logiccircuitdesign, independentoftheuseofVHDLandCADtools.

Features Numerous new end-of-chapter problems.

The book emphasizes the conceptsthatshouldbecoveredinanintroductorycourseonlogicdesign,focusingon:- Logicfunctions,gates,andrulesofBooleanalgebra.- Circuitsynthesisandoptimizationtechniques.- Numberrepresentationandarithmeticcircuits.- Combinational-circuitbuildingblocks,suchasmultiplexers,decoders,encoders,andcodeconverters.

- Sequential-circuit building blocks, such as flip-flops,registers,andcounters.

- Designofsynchronoussequentialcircuits.- Use of the basic building blocks in designing largersystems.

New Quartus softwarefromAltera.

Teachesthebasic design techniques forlogiccircuits.

Fundamentals of Digital Logic with VhDL Design, 3/e

Stephen Brown, UniversityofToronto,CanadaZvonko Vranesic, UniversityofToronto,Canadawww.mhhe.com/brownvranesic2009 978-0-07-126880-6 960 pages

13

Co

mp

ute

r E

ng

ine

eri

ng

Introduction to Logic Design, 3/eisintendedforthefirst course in logic design,takenbycomputerscience,computerengineering,andelectricalengineeringstudents.Aswiththepreviouseditions,thiseditionhasaclearpresentationoffundamentalsandanexceptionalcollectionofexamples,solvedproblemsandexercises.

Features All of the K-Map (Karnaugh map) coverageispresentedinonechapter(chapter3)insteadofcoverageappearingintwochapters.

For the third edition, Chapter 9 will be posted on the website. This allows foradditionalcoverageofothertopicswithoutincreasingthelengthofthetext.

Additional experiments have been added to Appendix D to allow students theopportunitytoperformavarietyofexperiments.

New Appendix A(RelatingtheAlgebratotheKarnaughMap)tiesalgebracoverageandK-Mapcoveragetogether.

New problems have been addedinAppendixEforbothcombinationalandsequentialsystemswhichgofromwordproblemtocircuitallinoneplace.

Introduction to Logic Design, 3/e

Alan B. Marcovitz, FloridaAtlanticUniversity-BocaRaton

www.mhhe.com/marcovitz2009 978-0-07-016490-1 656 pages

Marcovitz takes the successful formula realized in the authors previous books andofferseverythingafundamentals-oriented logic designcoursemightinclude.AswithMarcovitzspreviousbooks,theclear presentation of concepts and well-paced writing stylemakethistexttheidealcompaniontoanyfirstcourseindigitallogic.

Features An extensive set of examplesgivesstudentsmultipleopportunitiestounderstandthetopicsbeingpresented.

Test Yourselfsections,designedtohelpstudentsmeasuretheircomprehensionofkeymaterial,areincludedattheendofchapters.

ARIS: McGraw-Hills online course management system features a Test Bank forinstructorsaswellasonlinequizzingforstudents.Italsoincludessolutions,PowerPointslides of most figures and key material, instructor notes, parallel examples so theinstructorcandoadifferentexampleinclassfromtheoneofferedinthebook,and350algorithmicproblemsareprovidedtogivestudentsunlimitedpractice.

Introduction to Logic and Computer Design

Alan B. Marcovitz, FloridaAtlanticUniversity-BocaRaton

www.mhhe.com/marcovitz2008 978-0-07-128598-8 688 pages

Table of contents1: Introduction2: Combinational Systems3: The Karnaugh Map4: Function Minimization Algorithms5: Designing Combinational Systems

6: Analysis of Sequential Systems7: The Design of Sequential Systems8: Solving Larger Sequential Problems9: Simplification of Sequential Circuits

Table of contents1: IntroductionPart 1: Logic Design2: Combinational Systems3: The Karnaugh Map4: Designing Combinational Systems5: Analysis of Sequential Systems6: The Design of Sequential Systems7: Solving Larger Sequential Problems

Part 2: Computer Design8: Computer Organization9: Computer Design Fundamentals10: The Design of a Central Processing Unit11: Beyond the Central Processing Unit

14

Co

mp

ute

r E

ng

ine

eri

ng

Table of contents1: Introduction to Analog Design 2: Basic MOS Device Physics 3: Single-Stage Amplifiers 4: Differential Amplifiers 5: Passive and Active Current Mirrors 6: Frequency Response of Amplifiers 7: Noise 8: Feedback 9: Operational Amplifiers

10: Stability and Frequency Compensation 11: Bandgap References 12: Introduction to Switched-Capacitor Circuits 13: Nonlinearity and Mismatch 14: Oscillators 15: Phase-Locked Loops 16: Short-Channel Effects and Device Models 17: CMOS Processing Technology 18: Layout and Packaging

Thistextbookdealswiththeanalysis and design of analog CMOS integrated circuits,emphasizingrecenttechnologicaldevelopmentsanddesignparadigmsthatstudentsandpracticingengineersneedtomastertosucceedintodaysindustry.

Features Basedontheauthorsteachingandresearchexperienceinthepasttenyears,thetextfollowsthree general principles:

(1)Motivate the reader bydescribingthesignificanceandapplicationofeachideawithreal-worldproblems;

(2)Forcethereadertolook at concepts fromanintuitivepointofview,preparinghim/herformorecomplexproblems;

(3)Complement the intuition byrigorousanalysis,confirmingtheresultsobtainedbytheintuitive,yetroughapproach.

Design of Analog CMoS Integrated Circuits

Behzad Razavi, UniversityofCalifornia-LosAngeles

www.mhhe.com/razavi2001 978-0-07-118839-5 704 pages

CMOS Digital Integrated Circuits: Analysis and Design, 3/e isthemostcomplete book on the market for CMOS circuits.Appropriateforelectricalengineeringandcomputerscience,thisbookstartswithCMOSprocessing,andthencoversMOStransistormodels,basic CMOS gates, interconnect effects, dynamic circuits, memory circuits, BiCMOScircuits,I/Ocircuits,VLSIdesignmethodologies,low-powerdesigntechniques,designformanufacturabilityanddesignfortestability.

Features Anentirelyre-writtenchapteronMemory Circuits(chapter10). Extensivetreatmentofstate-of-the-artmemorytechnologies,suchasdeep-submicron

DRAM arrays and Flash memories. Strongemphasison circuit design aspects throughoutthetext.

CMoS Digital Integrated Circuits: Analysis and Design, 3/e

Sung-Mo (Steve) Kang, UniversityofCalifornia-SantaCruzYusuf Leblebici, SwissFederalInstituteofTechnology

www.mhhe.com/kang2003 978-0-07-119644-4 672 pages

Table of contents1: Introduction 2: Fabrication of MOSFETS 3: MOS Transistor 4: Modeling of MOS Transistors Using SPICE 5: MOS Inverters: Static Characteristics 6: MOS Inverters: Switching Characteristics and Interconnect Effects 7: Combinational MOS Logic Circuits 8: Sequential MOS Logic Circuits

9: Dynamic Logic Circuits 10: Semiconductor Memories 11: Low-Power CMOS Logic Circuits 12: BiCMOS Logic Circuits 13: Chip Input and Output (I/O) Circuits 14: Design for Manufacturability 15: Design for Testability

15

Table of contentsPart 1: The Engineering Design Process 1: The Engineering Design Process 2: Project Selection and Needs Identification 3: The Requirements Specification 4: Concept Generation and Evaluation Part 2: Design Tools 5: System Design I: Functional Decomposition 6: System Design II: Behavior Models

7: Testing 8: System Reliability Part 3: Professional Skills 9: Teams and Teamwork 10: Project Management 11: Ethical and Legal Issues 12: Oral Presentations

This book is written for students and teachers engaged in electrical and computerengineering designprojects, primarily in the senior year. It guides students and facultythroughthestepsnecessaryforthesuccessfulexecutionofdesignprojects.Theobjectiveis to provide a treatment of the design process with a sound academic basis that isintegratedwithpracticalapplication.The foundationof thebookexemplifies thatasolidunderstandingofthedesign process, design tools, and the right mix of professional skills are critical for project and career success. This text is unique in providing acomprehensivedesigntreatmentforelectricalandcomputerengineering.

Features Strong guiding visionthatasolidunderstandingoftheDesignProcess,DesignTools,andtherightmixofProfessionalSkillsarecriticalforprojectandcareersuccess.

Thistextdoesagoodjobofprovidingcomprehensive design treatment for ECE. A text at the right level for senior design--basedonreviewerfeedbackwehaveheardthatnobooksexistedthatwereatthelevelneeded.Thistextseemstonowbridgethatgapandwillbethebookofchoice.

Design for Electrical and Computer Engineers: Theory, Concepts and Practice

Ralph M. Ford,PennStateErieBehrendCollegeChris S. Coulston,PennStateErieBehrendCollege

www.mhhe.com/ford2008 978-0-07-126347-4 336 pages

An Introduction to Semiconductor Devices provides an understanding of the characteristics, operations and limitations of semiconductor devices. In ordertoprovide thisunderstanding, thebookbrings together the fundamentalphysicsof thesemiconductormaterial and the semiconductor device physics. Excellent pedagogy ispresentthroughoutthebookintheformofinterestingchaptersopeners,workedexamples,avarietyofexercises,keyterms,andendofchapterproblems.

Features Book features up-to-date coverage: MOSFETs are covered before the BiPolarJunctionTransistor,reflectingtheMOSFETspredominantroleinmoderntechnology.

Many worked examples are included throughout the text:Eachisfollowedbyanexerciseproblemthattestsmasteryofwhatwascoveredintheexample.

Test Your Understanding Exercisesareincludedattheendofeachmajorsection,providingstudentswithanopportunitytopracticewhattheyvelearned.

An Introduction to Semiconductor Devices

Donald A. Neamen,UniversityofNewMexico-Albuquerque

www.mhhe.com/neamen2006 978-0-07-125447-2 720 pages

Table of contents1: The Crystal Structure of Solids 2: Theory of Solids 3: The Semiconductor in Equilibrium 4: Carrier Transport Phenomena 5: The pn Junction 6: Fundamentals of the MOS Transistor

7: The MOSFET: Additional Concepts 8: Nonequilibrium Excess Carriers in Semiconductors 9: The pn Junction Diode 10: The Bipolar Transistor 11: Additional Semiconductor Devices and Device Concepts 12: Optical Devices

Co

mp

ute

r E

ng

ine

eri

ng

16

Co

mp

ute

r E

ng

ine

eri

ng

Eide: Engineering: Fundamentals and Problem Solving, 5/e www.mhhe.com/best 2008 978-0-07-110190-5 480 pages

Musto: Engineering Computations: An Introduction Using MATLAB and Excel www.mhhe.com/musto 2009 978-0-07-126357-3 336 pages

Rizzoni: Fundamentals of Electrical Engineering www.mhhe.com/rizzoni 2009 978-0-07-128338-0 736 pages

Schultz: Grobs Basic Electronics, 11/e 2010 978-0-07-122137-5 1,280 pages

Martin: Introduction to Engineering Ethics, 2/e www.mhhe.com/best 2010 978-0-07-126790-8 288 pages

Fowler: Electricity: Principles & Applications, 7/e www.mhhe.com/fowler7e 2008 978-0-07-128593-3

Tokheim: Digital Electronics: Principles & Applications, 7/e www.mhhe.com/tokheim7e 2008 978-0-07-110850-8 534 pages

Malvino: Electronic Principles, 7/e www.mhhe.com/ malvino7e2007 978-0-07-126191-3

NEW

NEW

17

McGraw-hills BEST Basic Engineering Series and Toolswww.mhhe.com/engcs/general/best

Co

mp

ute

r E

ng

ine

eri

ng

Gopal: Control Systems: Principles and Design, 2/e 2007 978-0-07-123127-5

Kasap: Principles of Electronic Materials and Devices, 3/e www.mhhe.com/kasap3 2006 978-0-07-124458-9 768 pages

Proakis: Digital Communications, 5/e www.mhhe.com/proakis 2008 978-0-07-126378-8 1,168 pages

Peebles: Probability, Random Variables, and Random Signal Principles, 4/e www.mhhe.com/peebles 2001 978-0-07-118181-5 480 pages

Kelton: Simulation with Arena, 5/e www.mhhe.com/kelton2010 978-0-07-126771-7 656 pages

Leon-Garcia: Communication Networks, 2/ewww.mhhe.com/ leongarcia2 2004 978-0-07-125709-1 928 pages

hart: Power Electronics www.mhhe.com/hart 2010 978-0-07-128930-6 544 pages

Saadat: Power Systems Analysis, 2/e www.mhhe.com/saadat 2004 978-0-07-128184-3

NEW

McGraw-Hill Educationoffersavarietyofcontentsolutionstohelplecturerscreateacustomizedtextcloselymatchingtheirsyllabusandstudentsability.

Create your ideal text by:CombiningcontentfrommorethanoneMcGraw-HilltextbookDeletingthecontentyoudonotcoverIncludingspecialreadingsandcasesAddingyoursyllabus,lecturenotesanduniversitylogo Joiningthetextandstudyguideinonebook

And,thistime,addasubject-specificglossarytranslatedinyourlocallanguage!

Middle East & AfricaAly Mahmoud(Egypt, Libya, Morocco & Tunisia)aly_mahmoud@mcgraw-hill.comMobile: 0020 1 23161795Tel. /Fax: 0020 2 24534178

Mohamed Shawky(Egypt, Libya, Morocco & Tunisia)mohamed_shawky@mcgraw-hill.comMobile: 0020 1 80603886Tel. /Fax: 0020 2 22705305

Haluk Baykara(Turkey, North Cyprus & Israel)haluk_baykara@mcgraw-hill.comMobile: 0090 532 3514194Tel.: 0090 312 2381369Fax: 0090 312 2381395

Sevcan Karababa(Turkey & North Cyprus)sevcan_karababa@mcgraw-hill.comMobile: 0090 533 3503378Tel: 0090 312 4176458Fax: 0090 312 4176459

Faris Bukhari(Jordan, Lebanon, Syria & Palestine)faris_bukhari@mcgraw-hill.comTel: 00962 777 44 7676

Hassan Zaza(U.A.E. & Gulf States)hassan_zaza@mcgraw-hill.comMobile: 00971 506534623Tel.: 00971 43913171Fax: 00971 43918005

Shirine Habash(U.A.E. & Gulf States)shirine_habash@mcgraw-hill.comMobile: 00971 509034491Tel.: 00971 43913171Fax: 00971 43918005

Hussein Al-Qadi(Saudi Arabia & Yemen)hussein_alqadi@mcgraw-hill.comMobile: 009665 0 4630149Tel. /Fax: 009661 4 742447

Tony MoggachIMA (Africa)tony.moggach@moggach.demon.co.ukTel.: 0044 20 72678054Fax: 0044 20 74240034/74858462

Joseph MakopeIMA (Africa)joseph@intermediaafrica.co.ukTel.: 00234 8089539358 / 0044 20 72678054Fax: 0044 20 74240034/74858462

Behruz Neirami(Iran)behruzn@neda.net.irTel.: 0098 2188748554Fax: 0098 2188745894

Marketing Managers, MEAWissam Al-ShaarScience, Engineering & Mathematicswissam_alshaar@mcgraw-hill.comMobile: 00961 3 849458Tel. /Fax: 00961 5 410748

Taline Prescott-DecieBusiness, Humanities & Social Sciencestaline_prescott-decie@mcgraw-hill.comMobile: 00961 3 326143Tel. /Fax: 00961 4 401579

Greece, Cyprus & MaltaYiannis PlessasSales Manageryiannis_plessas@mcgraw-hill.comMobile: 0030 6945339755Tel.: 0030210 6560990Fax: 0030210 6545525

Eastern EuropeMarek Lewinsonmlewinso@it.com.plMobile: 0048 602 707037Tel. /Fax: 0048 22 6714819

Radek Janousekradek@mareklewinson.comMobile: 00420 602 294014

Need help getting started? Contact your representative or our Editorial Department:

Tanja Radivoevska tanja_radivoevska@mcgraw-hill.com

Tel.: 0030210 6560990 Fax: 0030210 6545525

www.mcgrawhillcreate.com

Craft your teaching resources to match the way you teach!

Find

Personalize

Search across and within 3 million pages of content. Full text search across all McGraw-Hill resources. Specialized search filtersby discipline, by copyright, etc.

Arrange Rearrange chapters, combine content from multiple sources, and even upload your own content.

Select your cover, add your course information, and choose either an eBook or a print book for your students.

*Receive a FREE PDF review copy in minutes!

Register TODAY and see how McGraw-Hill Create allows you to teach your students, your way!

Electrical & Electronic EngineeringTelecommunications & Networking

Evil GeniusEncyclopedias & dictionaries

Study Guides

McGraw-Hill Professional Engineering

2010

Electrical & Electronic Engineering

Professional

Standard Handbook of Engineering Calculations, 4eHICKS 978-0-07-142793-7 2005

American Electricians' Handbook, 15eCROFT 978-0-07-149462-5 2009

Electrical Equipment Handbook: Troubleshooting and MaintenanceKIAMEH 978-0-07-139603-5 2003

Electronics Technology HandbookSCLATER 978-0-07-058048-0 1999

McGraw-Hill's Handbook of Electrical Construction Calculations, Revised Edition (Conforms to the 1996 NEC)McPARTLAND 978-0-07-046641-8 1998

McGraw-Hill's National Electrical Code 2008 Handbook, 26e(Conforms to the 2008 NEC)McPARTLAND 978-0-07-154652-2 2009

McGraw-Hill's National Electrical Safety Code (NESC) 2007 HandbookMARNE 978-0-07-145367-7 2007

Electrical Engineer's Portable Handbook, 2eHICKEY 978-0-07-141820-1 2004

Standard Handbook of Electronic Engineering, 5eCHRISTIANSEN 978-0-07-138421-6 2005

Electrical Safety Handbook, 3e CADICK 978-0-07-145772-9 2006

Handbooks

Handbook of Batteries, 4/e REDDY

The Handbook of Batteries, standard battery reference for over twenty years, provides authoritative data on the characteristics, properties, and performance of every major battery type. This fourth edition is entirely rewritten and reorganized to reflect the huge advances in cell efficiency, including new information on lithium ion and large nickel metal hydride batteries, and portable fuel cells. This unparalleled resource allows readers to: Determine the performance characteristics of batteries under all conditions; Select the most suitable battery for a given application; Apply leading-edge technologies, materials, and methods in new designs and products and have necessary data and equations at their fingertips.

978-0-07-162421-3 2010

Standard Handbook of Electrical Engineering, 15eFINK978-0-07-144146-9 2007

Printed Circuits Handbook, 6eCOOMBS 978-0-07-146734-6 2008

SPICE Circuit HandbookSANDLER 978-0-07-146857-2 2006

Handbook of Transformer Design and Applications, 2eFLANAGAN 978-0-07-021291-6 1993

The Lineman's and Cableman's Handbook, 11eSHOEMAKER 978-0-07-146789-6 2007

Electrical & Electronic Engineering

Professional

Electronic Filter Design Handbook, 4eWILLIAMS 978-0-07-147171-8 2007

Semiconductor Manufacturing HandbookGENG 978-0-07-144559-7 2005

Electronic Packaging and Interconnection Handbook, 4eHARPER 978-0-07-143048-7 2005

Area Array Packaging Handbook: Manufacturing and AssemblyGILLEO 978-0-07-137493-4 2002

Handbook of Electric Power Calculations, 3eBEATY 978-0-07-136298-6 2001

Power Generation Handbook: Selection, Applications, Operation, and MaintenanceKIAMEH 978-0-07-139604-2 2003

Switchmode Power Supply Handbook, 3eBILLINGS 978-0-07-163971-2 2010

Electric Motor HandbookBEATY 978-0-07-035971-0 1998

Handbook of Small Electric MotorsYEADON 978-0-07-072332-0 2001

Motor Control Electronics HandbookVALENTINE 978-0-07-066810-2 1998

Complete List

McGraw-Hill's Engineering CompanionGANIC 978-0-07-137836-9 2003

Practical Control Engineering: A Guide for Engineers, Managers, and PractitionersKOENIG 978-0-07-160613-4 2009

Electrician's Guide to Control and Monitoring Systems:Installation, Troubleshooting & MaintenanceCUTTER978-0-07-170061-0 2010

Engineering Formulas, 8eGIECK 978-0-07-145774-3 2006

Electrician's Calculations ManualFOWLER 978-0-07-143654-0 2005

NEC 2008 Need to Know: The 20% of the Code You Need 80% of the TimeKELLER 978-0-07-150845-2 2008

Teach Yourself Electricity and Electronics, 4eGIBILISCO 978-0-07-145933-4 2006

Electricity Experiments You Can Do At HomeGIBILISCO978-0-07-162164-9 2010

Electrical Inspection Notes: Up to CodeTAYLOR 978-0-07-144887-1 2005

McGraw-Hill Electrician's Pocket Manual, 2eMILLER 978-0-07-145887-0 2006

Electrical & Electronic Engineering

Professional

Electrician's Instant AnswersTUCK 978-0-07-140203-3 2003

TAB Electronics Guide to Understanding Electricity and Electronics, 2eSLONE 978-0-07-136057-9 2000

Beginner's Guide to Reading Schematics, 2eTRAISTER 978-0-83-067632-3 1991

Practical Electronics for Inventors, 2eSCHERZ 978-0-07-145281-6 2007

Mechanical Devices for the Electronics ExperimenterRORABAUGH 978-0-07-053547-3 1995

Electronic Components: A Complete Reference for Project BuildersHORN 978-0-83-063333-3 1991

Introduction to Electrical and Computer Engineering, 2eCARLEY 978-0-07-013778-3 1997

Electronic Troubleshooting, 3e TOMAL 978-0-07-142307-6 2004

Troubleshooting Electronic EquipmentKHANDPUR 978-0-07-147731-4 2007

The Complete Book of Electronic SecurityPHILLIPS 978-0-07-138018-8 2002

McGraw-Hill Electrician's Troubleshooting and Testing Pocket Guide, 3eSTAUFFER 978-0-07-148782-5 2007

Troubleshooting and Repairing Consumer Electronics without a Schematic, 3eDAVIDSON 978-0-07-142181-2 2004

Electric Motor Maintenance and TroubleshootingHAND 978-0-07-136359-4 2002

Troubleshooting and Repairing Major Appliances, 2eKLEINERT 978-0-07-148148-9 2007

Green Electronics Design and Manufacturing: Implementing Lead-Free and RoHS-Compliant Global ProductsSHINA 978-0-07-149594-3 2008

Green LightingBRINSKY978-0-07-163016-0 2010

Semiconductor Heterojunctions and NanostructuresMANASREH 978-0-07-145228-1 2005

Carbon Nano Forms and ApplicationsSHARON978-0-07-163960-6 2010

MEMS/MOEMS Packaging: Concepts, Designs, Materials and ProcessesGILLEO 978-0-07-145556-5 2006

Advanced MEMS PackagingLAU 978-0-07-162623-1 2010

Electrical & Electronic Engineering

Professional

Implementing Lead-Free ElectronicsHWANG 978-0-07-144374-6 2005

Electronics Manufacturing with Lead-Free, Halogen-Free and Conductive-Adhesive MaterialsLAU 978-0-07-138624-1 2003

Electronic Assembly Fabrication: Chips, Circuit Boards, Packages, and ComponentsHARPER 978-0-07-137882-6 2002

Six Sigma for Electronics Design and ManufacturingSHINA 978-0-07-139511-3 2002

Optimizing Quality in Electronics Assembly: A Heretical ApproachSMITH 978-0-07-059229-2 1997

Electrical Design Guide for Commercial BuildingsCLARK 978-0-07-011991-8 1998

How to Start and Operate an Electrical Contracting Business, 2eRAY 978-0-07-052621-1 1998

Electrical Safety of Low-Voltage SystemsMITOLO 978-0-07-150818-6 2009

Electrical Power Systems Quality, 2eDUGAN 978-0-07-138622-7 2003

Switching Power Supply Design, 3ePRESSMAN 978-0-07-148272-1 2009

High Voltage Engineering, 2eNAIDU 978-0-07-136108-8 2000

Switch-Mode Power Supply Simulation: Designing with SPICE 3SANDLER 978-0-07-146326-3 2006

Transients in Electrical Systems: Recognition, Prediction and MitigationDAS978-0-07-162248-6 2010

Switch-Mode Power Supplies: SPICE Simulations and Practical DesignsBASSO 978-0-07-150858-2 2008

Power Quality in Electrical SystemsKUSKO 978-0-07-147075-9 2007

Electric Power DistributionPABLA 978-0-07-144783-6 2005

Power System Load Flow AnalysisPOWELL 978-0-07-144779-9 2005

Microchip Fabrication, 5eVAN ZANT 978-0-07-143241-2 2004

ARM Synthesizable Designs with Actel FPGAs: With Mixed-Signal SoC ApplicationsATESHIAN 978-0-07-162281-3 2010

Systems Design using SoCs: Reliability, Maintainability, Availability and Suitability AnalysisATESHIAN978-0-07-163739-8 2010

Electrical & Electronic Engineering

Professional

Electricity and Electronics for HVACMILLER 978-0-07-149668-1 2008

Semiconductor Device Modeling with SPICE, 2eMASSABRIO 978-0-07-134955-0 1998

The Ultimate Tesla Coil Design and Construction GuideTILBURY 978-0-07-149737-4 2008

Homemade Lightning: Creative Experiments in Electricity, 3eFORD 978-0-07-137323-4 2002

Industrial Electricity and Motor ControlsMILLER 978-0-07-154476-4 2008

TransformersBHARAT HEAVY ELECTRICALS LIMITED 978-0-07-144785-0 2005

Lineman and Cableman's Field Manual, 2eSHOEMAKER 978-0-07-162121-2 2009

Old Electrical Wiring Maintenance and Retrofit, 2eSHAPIRO978-0-07-166357-1 2010

Power System Operation, 3eMILLER 978-0-07-041977-3 1994

Power System Stability and ControlKUNDUR 978-0-07-035958-1 1994

Electric Motors and Control Techniques, 2eGOTTLIEB 978-0-07-024012-4 1994

Analog IC Design with Low-Dropout RegulatorsRINCN-MORA 978-0-07-160893-0 2009

Wire Bonding in Microelectronics, 3eHARMAN 978-0-07-147623-2 2010

Fabless Semiconductor ImplementationKUMAR 978-0-07-150266-5 2008

LAN Wiring, 3eTRULOVE 978-0-07-145975-4 2006

Low Voltage Wiring: Security/Fire Alarm Systems, 3eTRAISTER 978-0-07-137674-7 2002

Locksmithing and Electronic Security Wiring DiagramsSCHUM 978-0-07-139305-8 2002

Electronic Filter Simulation and DesignBIANCHI 978-0-07-149467-0 2007

Thin-Film Deposition: Principles and PracticeSMITH 978-0-07-058502-7 1995

Photomask Fabrication TechnologyEYNON 978-0-07-144563-4 2006

Electrical & Electronic Engineering

Professional

Photodiode Amplifiers: OP AMP SolutionsGRAEME 978-0-07-024247-0 1996

Introduction to System-On-Package (SOP): Miniaturization of the Entire SystemTUMMALA 978-0-07-145906-8 2008

Digital Signal Processing: Signals, Systems, and FiltersANTONIOU 978-0-07-145424-7 2006

Hardware Implementation of Finite-Field ArithmeticDESCHAMPS 978-0-07-154581-5 2009

Embedded Core Design with FPGAsNAVABI 978-0-07-147481-8 2007

Secrets of RF Circuit Design, 3eCARR 978-0-07-137067-7 2001

ASIC Design in the Silicon Sandbox: A Complete Guide to Building Mixed-Signal Integrated CircuitsBARR 978-0-07-148161-8 2007

Failure-Free Integrated Circuit Packages: COHN 978-0-07-143484-3 2004

Charge Pump Circuit DesignPAN 978-0-07-147045-2 2007

Formal Verification: For Digital Circuit DesignPERRY 978-0-07-144372-2 2005

Basics of CMOS Cell DesignSICARD 978-0-07-148839-6 2007

Phase-Locked Loops: Design, Simulation, and Applications, 6eBEST 978-0-07-149375-8 2007

Nanoscale CMOS VLSI Circuits: Design for ManufacturabilityKUNDU978-0-07-163519-6 2010

Silicon-on-Sapphire Circuits and Systems: Sensor & Biosensor InterfacesCULURCIELLO978-0-07-160848-0 2010

VLIW Microprocessor Hardware Design: For ASICs and FPGALEE 978-0-07-149702-2 2008

Microprocessor Design: A Practical Guide from Design Planning to ManufacturingMcFARLAND 978-0-07-145951-8 2006

Printed Circuit Boards: Design, Fabrication, and AssemblyKHANDPUR 978-0-07-146420-8 2006

Printed Circuit Assembly DesignMARKS 978-0-07-041107-4 2000

Electronic Circuit and System Simulation MethodsPILLAGE978-0-07-134770-9 1999

Phase-Locked Loop Synthesizer SimulationBIANCHI 978-0-07-145371-4 2005

Practical Array ProcessingSULLIVAN 978-0-07-154898-4 2009

Electrical & Electronic Engineering

Professional

Making PIC Microcontroller Instruments and ControllersSANDHU 978-0-07-160616-5 2009

Running Small Motors with PIC MicrocontrollersSANDHU978-0-07-163351-2 2010

Programming the Propeller with SPIN: A Beginner's Guide to Parallel ProcessingSANDHU978-0-07-171666-6 2010

Programming and Customizing the Multicore PropellerPARALLAX, INC.978-0-07-166450-9 2010

PIC Microcontroller Project Book: For PICBasic and PICBasic Pro Compilers, 2eIOVINE 978-0-07-143704-2 2004

Programming and Customizing the 8051 MicrocontrollerPREDKO 978-0-07-134192-9 1999

Programming and Customizing the Basic Stamp Computer, 2eEDWARDS 978-0-07-137192-6 2001

Programming and Customizing the AVR MicrocontrollerGADRE 978-0-07-134666-5 2001

Programming and Customizing the PIC Microcontroller, 3ePREDKO 978-0-07-147287-6 2008

Programming and Customizing the PICAXE MicrocontrollerLINCOLN 978-0-07-145765-1 2006

VHDL: Modular Design and Synthesis of Cores and Systems, 3eNAVABI 978-0-07-147545-7 2007

Programming and Customizing the ARM7 MicrocontrollerPREDKO 978-0-07-159757-9 2009

LabVIEW Digital Signal Processing and Digital CommunicationsCLARK 978-0-07-144492-7 2005

VHDL: Programming by Example, 4ePERRY 978-0-07-140070-1 2002

Verilog Digital System Design, 2eNAVABI 978-0-07-144564-1 2006

LabVIEW Graphical Programming, 4eJOHNSON 978-0-07-145146-8 2007

Build Your Own Electronics Workshop: Everything You Need to Design a Work Space, Use Test Equipment, Build and Troubleshoot CircuitsPETRUZZELLIS 978-0-07-144724-9 2005

Build Your Own Electric MotorcycleVOGEL 978-0-07-162293-6 2009

Build Your Own Printed Circuit BoardWILLIAMS 978-0-07-142783-8 2004

Build Your Own Electric Vehicle, 2eLEITMAN 978-0-07-154373-6 2009

Build Your Own Plug-In Hybrid VehicleLEITMAN 978-0-07-161473-3 2009

Telecommunications & Networking

Professional

Handbooks

Telecommunications Cabling Installation, 2eBICSI 978-0-07-140979-7 2003

Fundamentals of Communications SystemsFITZ 978-0-07-148280-6 2007

Standard Handbook of Audio Engineering, 2eWHITAKER 978-0-07-006717-2 2002

Wireless Broadband HandbookBATES 978-0-07-137161-2 2001

Tuning Microsoft Server Clusters: Guaranteeing High Availability for Business NetworksBUCHANAN 978-0-07-141739-6 2004

Audio/Video Protocol HandbookWHITAKER 978-0-07-139643-1 2002

Standard Handbook of Video and Television Engineering, 4eWHITAKER 978-0-07-141180-6 2003

Master Handbook of Acoustics, 5eEVEREST 978-0-07-160332-4 2009

Cable Communications TechnologyBARTLETT 978-0-07-145781-1 2006

Communications Networks: Principles and PracticeKASERA 978-0-07-147656-0 2007

The Pilot's Radio Communications Handbook, 5eILLMAN 978-0-07-031832-8 1998

WiMAX Handbook: Building 802-16 Wireless NetworksOHRTMAN 978-0-07-145401-8 2005

Telecom Crash Course, 2eSHEPARD 978-0-07-145143-7 2005

Standard Handbook of Broadcast EngineeringWHITAKER 978-0-07-145100-0 2005

Network Processors: Architectures, Protocols, and PlatformsLEKKAS 978-0-07-140986-5 2003

Complete List

ATM Networks: Concepts and Protocols KASERA 978-0-07-147732-1 2007

Disaster Proofing Information Systems: A Complete Methodology for Eliminating Single Points of FailureBUCHANAN 978-0-07-140922-3 2003

Telecommunications & Networking

Professional

Wireless Security: Models, Threats, and SolutionsNICHOLS 978-0-07-138038-6 2002

Complete Wireless Design, 2eSAYRE 978-0-07-154452-8 2008

Wireless and Cellular Telecommunications, 3eLEE 978-0-07-143686-1 2006

Wireless A to ZMULLER 978-0-07-141088-5 2003

Installing, Troubleshooting, and Repairing Wireless NetworksASPINWALL 978-0-07-141070-0 2003

Signal Processing for Wireless CommunicationsBOCCUZZI 978-0-07-148905-8 2008

Wireless Mesh Networking: With 802.16, 802.11 and ZigBEEAGGELOU 978-0-07-148256-1 2009

3G Wireless with WiMAX and Wi-Fi: 802.16 and 802.11SMITH978-0-07-144082-0 2005

Roaming in Wireless NetworksSIDDIQUI 978-0-07-145505-3 2006

CDMA Capacity and Quality OptimizationROSENBERG 978-0-07-139919-7 2003

Spread Spectrum CDMA: IS-95 and IS-2000 for RF CommunicationsLEE 978-0-07-140671-0 2003

RF and Microwave Power Amplifier DesignGREBENNIKOV 978-0-07-144493-4 2005

The UMTS Air-Interface in RF Engineering: Design and Operation of UMTS NetworksSU978-0-07-148866-2 2007

WiFi Home NetworkingSMITH 978-0-07-141253-7 2003

Gigabit Ethernet for Metro Area NetworksBEDELL 978-0-07-139389-8 2003

Ethernet Passive Optical NetworksKRAMER 978-0-07-144562-7 2005

Ethernet in the First Mile: The IEEE 802.3ah EFM StandardBECK 978-0-07-145506-0 2005

APIs and Protocols for Convergent Network ServicesMUELLER 978-0-07-138880-1 2002

Wireless Telecommunications Networking with ANSI-41, 2eSNYDER 978-0-07-135231-4 2001

Microwave Transmission Networks, 2eLEHPAMER 978-0-07-170122-8 2010

Mobile Computing: Technology, Applications, and Service CreationTALUKDER 978-0-07-147733-8 2007

Fundamentals of Mobile and Pervasive ComputingADELSTEIN 978-0-07-141237-7 2005

Mobile Video Telephony: For 3G Wireless NetworksMYERS 978-0-07-144568-9 2005

Signaling System 7, 5eRUSSELL 978-0-07-146879-4 2006

Fixed Mobile ConvergenceSHNEYDERMAN978-0-07-148606-4 2008

Telecommunications & Networking

Professional

Femtocells: Design & ApplicationBOCCUZZI978-0-07-163358-1 2010

Video Over IP: Networks and SystemsMALLYA 978-0-07-159684-8 2010

Carrier Grade VoIP, 3eNATSVLISHVILI 978-0-07-149421-2 2010

VoIP Crash CourseSHEPARD 978-0-07-226241-4 2005

GPS and Galileo: Dual RF Front-End Receiver Design, Fabrication, and TestMENDIZABAL 978-0-07-159869-9 2009

Video Engineering, 3eLUTHER978-0-07-135017-4 2000

Digital Cinema: The Revolution in Cinematography, Postproduction, and DistributionMcKERNAN978-0-07-142963-4 2005

Troubleshooting and Repairing Consumer Electronics without a Schematic, 3eDAVIDSON 978-0-07-142181-2 2004

Mastering Digital Television: The Complete Guide to the DTV ConversionWHITAKER978-0-07-147016-2 2006

High Definition DVD Handbook: Producing for HD DVD and Blu-ray DiscJOHNSON978-0-07-148585-2 2007

DVD Demystified, 3eTAYLOR978-0-07-142396-0 2006

Blu-ray Disc DemystifiedTAYLOR978-0-07-159092-1 2009

DVD Studio Pro 4: The Complete Guide to DVD Authoring with Macintosh, 2eNAZARIAN978-0-07-147015-5 2006

Programming HD DVD and Blu-ray Disc: The HD CookbookZINK978-0-07-149670-4 2008

Principles of Digital Audio, 5ePOHLMANN978-0-07-144156-8 2005

Recording Studio: Technology, Maintenance, and RepairsMcCARTNEY978-0-07-142726-5 2004

RFID: Radio Frequency IdentificationSHEPARD978-0-07-144299-2 2005

Audio/Video Cable Installer's Pocket GuideLAMPEN978-0-07-138621-0 2002

Radio Signal FindingSINCLAIR978-0-07-137191-9 2001

Aided Navigation: GPS with High Rate SensorsFARRELL 978-0-07-149329-1 2008

Telecommunications & Networking

Professional

Volume II: Design, Fabrications and

Testing, Sources and Detectors, Radiometry and

Photometry 978-0-07-149890-6

Volume I: Geometrical and Physical Optics, Polarized Light,

Components and Instruments978-0-07-149889-0

Volume III: Vision and Vision Optics

978-0-07-149891-3

Modern Optical Engineering, 4eSMITH 978-0-07-147687-4 2008

Volume V: Atmospheric Optics,

Modulators, Fiber Optics and Communication, X-Ray and

Neuron Optics978-0-07-163313-0

5-Volume Set978-0-07-170160-0

Optical System Design, 2eFISCHER 978-0-07-147248-7 2008

Volume IV: Optical Properties of Materials, Nonlinear Optics, Quantum and

Molecular Optics978-0-07-149892-0

Optical Switching Systems and TechnologiesBATES 978-0-07-138853-5 2001

Photonics Essentials, 2ePEARSALL978-0-07-162935-5 2010

Practical Optical System Layout: And Use of Stock LensesSMITH 978-0-07-059254-4 1997

Photodetection and Measurement: Maximizing Performance in Optical SystemsJOHNSON 978-0-07-140944-5 2003

Photonics and Laser Engineering: Principles, Devices & ApplicationsSENNAROGLU978-0-07-160608-0 2010

Advanced Nonimaging/Illumination OpticsKOSHEL978-0-07-159851-4 2010

Photonics Rules of Thumb: Optics, Electro-Optics, Fiber Optics, and Lasers, 2eMILLER 978-0-07-138519-0 2004

Sponsored by The Optical Society of AmericaHandbooks of Optics, 3e

The Optical Society of America is a professional society dedicated to serving optics professionals and academics, in the U.S. and around the world. An unprecedented Whos Who of global optics experts explain, illustrate, and solve the entire field of optics in five carefully architected and cross-referenced volumes. There is not anything else like this available elsewhere!

Optics

Planning Fiber Optic NetworksCHOMYCZ 978-0-07-149919-4 2009

Phase Space Optics: Fundamentals and ApplicationsTESTORF 978-0-07-159798-2 2010

Fiber Optic Installer's Field ManualCHOMYCZ 978-0-07-135604-6 2000

Modern Lens Design, 2eSMITH 978-0-07-143830-8 2005

Chalcogenide Glasses for Infrared OpticsHILTON978-0-07-159697-8 2010

Optical Waveguide Modes: Polarization, Coupling and SymmmetryBLACK978-0-07-162296-7 2010

Extreme Ultraviolet LithographyWU 978-0-07-154918-9 2009

Telecommunications & Networking

Professional

Handbook of Ultra-Short Pulse Lasers for Biomedical and Medical ApplicationsNEEV978-0-07-162732-0 2010

Biomedical Applications of Light ScatteringWAX 978-0-07-159880-4 2010

Vibrational Spectroscopic Imaging for Biomedical ApplicationsSRINIVASAN978-0-07-159699-2 2010

Optofluidics: Fundamentals, Devices, and ApplicationsFAINMAN978-0-07-160156-6 2010

Artificial Tactile Sensing in Biomedical EngineeringNAJARIAN 978-0-07-160151-1 2009

In Vivo Clinical Imaging and DiagnosisTUNNELL978-0-07-162683-5 2010

Organic Electronics in Sensors and BiotechnologySHINAR 978-0-07-159675-6 2009

Nano-BiophotonicsPOPESCU978-0-07-173701-2 2010

Biomedical Engineering and Design Handbook: Volume I and II, 2eKUTZ978-0-07-149840-1 2009978-0-07-149838-8 (Volume I)978-0-07-149839-5 (Volume II)

Telecommunications & Networking

Professional

Geographic Information Systems

Remote Sensing for Biodiversity and Wildlife Management: Synthesis & ApplicationsFRANKLIN978-0-07-162247-9 2010

Remote Sensing and GIS Integration: Theories, Methods and ApplicationsWENG978-0-07-160653-0 2010

Spectral Imagery and GIScience: Theories & ApplicationsROBILA978-0-07-160211-2 2010

Digital Analysis of Remotely Sensed ImageryGAO 978-0-07-160465-9 2009

Radar Handbook, 3eSKOLNIK 978-0-07-148547-0 2008

Fundamentals of Radar Signal ProcessingRICHARDS 978-0-07-144474-3 2005

Space Based Radar: Theory and ApplicationsPILLAI 978-0-07-149756-5 2008

Antennas & Radars

Antenna Engineering Handbook, 4eVOLAKIS 978-0-07-147574-7 2007

Practical Antenna Handbook, 5eHIPPISLEY 978-0-07-163958-3 2010

Small Antennas and Miniaturization TechniquesVOLAKIS978-0-07-162553-1 2010

Communication Satellite Antennas: System Architecture, Technology, and EvaluationDYBDAL 978-0-07-160918-0 2009

Antennas for Fixed Base-Stations in Wireless CommunicationsCHEN 978-0-07-161288-3 2009

Smart Antennas for Wireless Communications with MATLABGROSS 978-0-07-144789-8 2006

Folded Unipole Antennas: Theory and ApplicationsRAINES 978-0-07-147485-6 2007

Satellite Communications, 4eRODDY 978-0-07-146298-3 2006

Sensors Handbook, 2eSOLOMAN 978-0-07-160570-0 2009

Sensors and Control Systems in Manufacturing, 2eSOLOMAN 978-0-07-160572-4 2010

Evil Genius

Professional

The Evil Genius series makes building real working projects and creating devices practical, efficient and fun. Featuring easy-to-follow, step-by-step instructions, it offers loads of projects to delve into -starting from the basic and gradually building up to more sophisticated ones.

Holography Projects for the Evil GeniusHARPER 978-0-07-162400-8 2010

Mind Performance Projects for the Evil Genius: 19 Brain-Bending Bio HacksGRAHAM 978-0-07-162392-6 2010

50 Green Projects for the Evil GeniusSHARIFF 978-0-07-154959-2 2009

Electronic Sensors for the Evil Genius: 54 Electrifying ProjectsPETRUZZELLIS 978-0-07-147036-0 2006

More Electronic Gadgets for the Evil Genius: 40 New Build-It-Yourself ProjectsIANNINI 978-0-07-145905-1 2006

22 Radio and Receiver Projects for the Evil GeniusPETRUZZELLIS 978-0-07-148929-4 2008

123 PIC Microcontroller Experiments for the Evil GeniusPREDKO 978-0-07-145142-0 2005

Programming Video Games for the Evil Genius CINNAMON 978-0-07-149752-7 2008

Bionics for the Evil Genius: 25 Build-It-Yourself ProjectsBRAGA 978-0-07-145925-9 2006

25 Home Automation Projects for the Evil GeniusLEDFORD 978-0-07-147757-4 2007

Bike, Scooter, and Chopper Projects for the Evil GeniusGRAHAM 978-0-07-154526-6 2008

101 Outer Space Projects for the Evil GeniusPROCHNOW 978-0-07-148548-7 2007

46 Science Fair Projects for the Evil GeniusBONNET 978-0-07-160027-9 2009

Solar Energy Projects for the Evil Genius: 50 Build-It-Yourself ProjectsHARPER 978-0-07-147772-7 2008

Electronic Gadgets for the Evil Genius: 28 Build-It-Yourself ProjectsIANNINI 978-0-07-142609-1 2004

Telephone Projects for the Evil GeniusPETRUZZELLIS 978-0-07-154844-1 2009

Electronic Circuits for the Evil Genius: 57 Lessons with ProjectsCUTCHER 978-0-07-144881-9 2005

PC Mods for the Evil Genius: 25 Custom-Builds to Super-Charge Your ComputerASPINWALL 978-0-07-147360-6 2007

Mechatronics for the Evil Genius: 25 Build-It-Yourself ProjectsBRAGA 978-0-07-145759-0 2006

Fuel Cell Projects for the Evil Genius HARPER 978-0-07-149659-9 2008

50 Awesome Auto Projects for the Evil GeniusHARPER 978-0-07-145823-8 2006

50 Model Rocket Projects for the Evil Genius HARPER 978-0-07-146984-5 2007

51 High-Tech Practical Jokes for the Evil GeniusGRAHAM 978-0-07-149494-6 2008

New

New

Encyclopedias & Dictonaries

Professional

McGraw-Hill Encyclopedia of Science and Technology, 10e

The definitive source for keeping up with the amazing changes in science and technology -complete with more than 1,700 new and updated articles!

For more than four decades, the McGraw-Hill Encyclopedia of Science and Technology has provided readers with the information they need in an understandable, authoritative way that invites critical inquiry and captures the imagination.

Featuring entries written by international leaders in science and technology, no other reference so thoroughly and dynamically chronicles the expanding frontier, facts, and trends so vital to students, professionals, and general readers.

978-0-07-144143-8 2007

Free supplemental website available to all users! www.mhest.com

Thoroughly revised and updated, this classic encyclopedia features more than 7,000 concise articles covering all areas of science and technology -written by authors at the forefront of their fields, including numerous Nobel Prize winners.

978-0-07-161366-8 2009

McGraw-Hill Concise Encyclopedia of Science and Technology, 6e

More than 150 articles explore the latest advances in science and technology!

The McGraw-Hill Yearbook of Science and Technology 2010 continues its tradition of making information on the latest advances in science and technology accessible to the non-specialist through concise, richly illustrated articles.

978-0-07-163928-6 2010

McGraw-Hill Yearbook of Science and Technology 2010

For more than 35 years, the McGraw-Hill Dictionary of Scientific and Technical Terms has been the number one source for the terminology of science and technology, with definitions in more than 100 fields from acoustics to zoology. Now, following an extensive revision to its content, this classic is offered in a fresh new look with more 75 full color plates complementing the text.

978-0-07-160899-2 2010

McGraw-Hill Dictionary of Scientific and Technical Terms, 7e

Written in clear, simple language, this dictionary covers such topics as building construction, chemical engineering, civil engineering, control systems, design engineering, engineering acoustics, industrial engineering, information technology and computing, mechanical engineering, systems engineering, telecommunications, and thermodynamics.

978-0-07-141050-2 2003

McGraw-Hill Dictionary of Engineering, 2e

Study Guides

Professional

The key to faster learning and higher grades in every subject! Each Outline presents all the essential course information in an easy-to-follow, topic-by-topic format. It highlights all the important facts and offers hundreds of examples, solved problems, and practice exercises to test your skills.

Schaum s Outlines

Schaum s Easy Outlines - Crash Course

Basic Electricity, 2eGUSSOW 978-0-07-163528-8 2010

Basic Mathematics for Electricity and Electronics, 2eBEISER 978-0-07-004439-5 1993

Electronic Devices and Circuits, 2eCATHEY 978-0-07-136270-2 2002

OpticsHECHT 978-0-07-027730-4 1974

Electromagnetics, 3eEDMINISTER 978-0-07-163235-5 2010

Analog and Digital Communications, 2eHSU 978-0-07-140228-6 2003

Signals and Systems, 2eHSU 978-0-07-163472-4 2010

Introduction to Digital SystemsPALMER 978-0-07-048439-9 1993

Basic Electrical Engineering, 2eCATHEY 978-0-07-011355-8 1997

Electric Circuits, 4eNAHVI 978-0-07-139307-2 2003

Basic Circuit Analysis, 2eO'MALLEY 978-0-07-047824-4 1992

Electric Machines and Electromechanics, 2eNASAR 978-0-07-045994-6 1998

Electric Power SystemsNASAR 978-0-07-045917-5 1990

Digital Signal ProcessingHAYES 978-0-07-027389-4 1999

Digital Principles, 3eTOKHEIM 978-0-07-065050-3 1994

Feedback and Control Systems, 3eDISTEFANO 978-0-07-163512-7 2010

Electronic Devices and CircuitsCATHEY978-0-07-145532-9 2006

Basic ElectricityGUSSOW978-0-07-138316-5 2002

ElectromagneticsEDMINISTER978-0-07-139879-4 2003

3000 Solved Problems in Electric CircuitsNASAR978-0-07-045936-6 1988

New

New

New

New

Schaum s Solved Problems

Study Guides

Professional

The easiest, fastest, most practical way to learn new topics quickly! Organized as self-teaching guides, all Demystified titles come complete with key points, background information, end-of-chapter review questions, and even final exams.

Fundamentals of essential telecommunications topics in an easy to read, self-study format.

Demystified

Also available!

Wireless LANs DemystifiedBHOLA978-0-07-138784-2 2002

IP Telephony DemystifiedCAMP978-0-07-140670-3 2003

SIP DemystifiedCAMARILLO978-0-07-137340-1 2002

Cryptography DemystifiedHERSHEY978-0-07-140638-3 2003

Optics DemystifiedGIBILISCO 978-0-07-149449-6 2009

Circuit Analysis DemystifiedMcMAHON 978-0-07-148898-3 2008

Electronics DemystifiedGIBILISCO 978-0-07-143493-5 2005

Nanotechnology DemystifiedWILLIAMS 978-0-07-146023-1 2007

Signals and Systems DemystifiedMcMAHON 978-0-07-147578-5 2007

Home Networking DemystifiedLONG 978-0-07-225878-3 2005

Electricity DemystifiedGIBILISCO 978-0-07-143925-1 2006

Digital Electronics DemystifiedPREDKO 978-0-07-144141-4 2005

Robotics DemystifiedWISE 978-0-07-143678-6 2005

Visual C# 2005 DemystifiedKENT 978-0-07-226170-7 2006

Audio DemystifiedGIBILISCO 978-0-07-146983-8 2007

McGraw-Hill Professional Engineering

2010

For more information please contact:

Alexandra HoutasSales Supportalex_houtas@mcgraw-hill.com

Aly Mahmoud(Egypt, Libya, Morocco & Tunisia)aly_mahmoud@mcgraw-hill.com

Haluk Baykara(Turkey, North Cyprus & Israel)haluk_baykara@mcgraw-hill.com

Hussein Al-Qadi(Saudi Arabia & Yemen)hussein_alqadi@mcgraw-hill.com

Tony MoggachIMA (Africa)tony.moggach@moggach.demon.co.uk

Behruz Neirami (Iran)behruzn@neda.net.ir

Faris Bukhari(Lebanon, Jordan, Syria & Palestine)faris_bukhari@mcgraw-hill.com

Joseph MakopeIMA (West Africa)joseph@intermediaafrica.co.uk

Hassan Zaza(U.A.E. & Gulf States)hassan_zaza@mcgraw-hill.com

Yiannis Plessasyiannis_plessas@mcgraw-hill.com

Marek Lewinsonmlewinso@it.com.pl

Radek Janousekradek@mareklewinson.com