matrix feeder fishing guide uk

:::

PACKED FULL OF TOP FEEDER FISHING METHODS & TIPS

MASTER THE METHOD

LONG RANGE SUCCESS

ULTIMATE BAIT PRESENTATION

FEEDER FISHING GUIDE

FREE · FREE · FREE · FREE · FREE · FREE · FREE · FREE · FREE · FREE

FEEDER FISHING GUIDE

Matrix Feeder Guide 2015.indd 1 20/07/2015 11:04:09

2

: : :

MATRIX FEEDER FISHING GUIDE

INTRODUCTION


3

www.fi shmatrix.co.uk

RICKY TEALE

MATRIX FEEDER FISHING GUIDE

Welcome to the fi rst ever Matrix Feeder Fishing Guide. As the name suggests the aim of this guide is to cover many aspects of feeder fi shing with specifi c emphasis on the tackle you will need to master this productive style. There are two main forms of feeder fi shing and therefore this guide is separated into two - there is the modern, commercial style (fi shing on venues heavily stocked with carp) as well as the more traditional and general style (fi shing natural venues for bream, tench, barbel, and other silver fi sh).

Over the coming pages we will look at rods, reels, lines, feeders, rigs and accessories explaining in detail when, why and how to use them. At the end we have also produced a classifi ed section of the products we make that you can implement into your own feeder fi shing to make it not only easier but more successful too. By the end of the following 48-pages you should be armed with more than enough information about the tackle and tactics you need to catch more fi sh than ever before – we hope you enjoy it.

CONTENTSCOMMERCIAL FEEDER FISHING4-5 INTRODUCTION6-7 TOOLS OF THE TRADE8-11 METHOD FEEDER FISHING12-13 THE PELLET FEEDER 14-15 IN-LINE CAGE FEEDERS16-17 HOOKBAIT PRESENTATION

GENERAL FEEDER FISHING18-19 INTRODUCTION20-23 SHORT & MEDIUM RANGE 24-27 LONG RANGE FISHING28-29 PRESENTING A HOOKBAIT30-31 GET SET UP CORRECTLY

FEEDER FISHING TACKLE32-46 TACKLE DIRECTORY


4

: : :

COMMERCIAL WATER FEEDER FISHING

COMMERCIAL WATERS

THE FEEDER REVOLUTIONMan-made commercial waters are generally small in size and full of hard feeding and hard fi ghting carp. Because of the stocking levels and the carp’s naturally greedy nature, feeder fi shing is one of the most effective ways of fi shing, especially when combined with a short hooklength fi shed bolt rig style. The use of man-made baits like pellets has also had a big effect on fi shing styles and in recent years feeders have been developed to take advantage of not only the way fi sh feed in these waters but also what they feed on. When deciding to target these commercial venues you will need to ensure that you have the correct tackle to maximise not only your catch rate but also the enjoyment factor too!

RODSAs previously mentioned commercial venues tend to be quite small and therefore you need a short length rod to aid accurate casting as this will

give you far more control over the cast. It is also important that you use a rod with

a through action that will absorb

the fi ght of the fi sh correctly. When playing hard-fi ghting carp at close range the weight of the feeder will be very close to the hook so a nice soft rod will absorb any sudden lunges and prevent hook pulls or line breakages from occurring. During this guide we will take a look in more detail at the type of rod you will need for such fi shing as well as helping you to select the right reel to partner it with.

FEEDER CHOICEOver the years many companies have designed feeders especially for these commercial venues, and by using such feeders you really will maximise your chances of success. However, in order to give yourself the best chance of winning a match on this type of venue it is very important that you pick the right style of feeder for the situation that faces you. Over the coming pages we will look at the three most popular styles of feeders for commercial venues which are the Method, Pellet and Inline Cage and help you to decide when and how to use them to best effect.

MODERN COMMERCIAL WATERS HAVE REVOLUTIONISED FEEDER FISHING WITH NEW ROD DESIGNS AND ADVANCED FEEDER PRESENTATIONS DESIGNED SPECIFICALLY FOR MEDIUM SIZED CARP.


www.fi shmatrix.co.ukwww.fi shmatrix.co.uk

5

COMMERCIAL WATER FEEDER FISHING

RIGS AND HOOKBAITSWhen fi shing on the commercial-type venues almost all hookbaits will be presented on a Hair rig or band of some description and later in this guide we will cover the best options in detail. Whichever way you choose to present your bait it will be important that you pick a hook and

hooklength that is strong enough and reliable enough to land even the hardest fi ghting of carp. We would always recommend the use of short rigs whether you are using a method, pellet or inline cage and the majority of our team of expert commercial anglers would opt for a 4ins(10cm) hooklink.


6

: : :

6

COMMERCIAL WATERS

SHORT RODSGenerally on the commercial waters you will only be fi shing at short range, with casts no further than 40m usually required. Because of this short range it is defi nitely best to use short rods of 8ft, 9ft or10ft. These shorter rods make casting tight to features much easier and also make landing fi sh much easier too. In addition to the length of the rod, you also need to pay particular attention to the action of the rod as you need a nice, soft, through action to absorb the powerful fi ght of carp at close range to prevent hook pulls.

CARPMASTER RODSYou will be hard-pressed to fi nd better rods for commercials than our legendary Carpmaster range, which are designed for use with method, pellet and small open-ended feeders. The 8ft Little Pig Carpmaster is especially suited to fi shing the method in the margins or on narrow snake-type lakes and features a remarkably powerful back bone for handling large carp. The 9ft is perfect for up to 25 metres and the 10ft Carpmaster MK2 is a true all rounder that is ideal for ranges up to 40m with an increased handle length that

TOOLS OF THE TRADEMODERN MAN-MADE COMMERCIAL WATERS PRESENT MANY CHALLENGES. SHORT ACCURATE CASTING HAS TO BE COMBINED WITH PERFECT FISH PLAYING ACTIONS.

makes casting that much easier. A unique design feature of the Carpmaster rods is the removal of a joint from the middle of the rod which two-piece rods normally have. Instead they feature a short butt section followed by a long central section and then a quiver tip. This extended middle section gives unrivalled action both when casting and playing hard-fi ghting carp and make the Carpmaster rods the number one choice for commercial venues.

METHOD MASTER RODSFor those on a tight budget, the Method Master rods are an outstanding option as they have the correct actions for accurate casting and fi sh-playing. As the name suggests they are primarily designed for method feeder fi shing, but are also perfect for pellet feeder plus small cage and open-end feeders. The Method Masters have a slightly stiffer butt section, when compared to the Carpmaster range, which gives a little more casting power and are available in different lengths from 9ft to 12ft, with the 9 and 10ft models being particularly suited to commercial venues.



7


COMMERCIAL ROD FEATURES Short length for accurate short range casting

Through action for playing hard fi ghting carp

Easy to transport made-up

Line strength up to 12lb (5.5kg)

Casting distance up to 40 metres

REEL CHOICE When using either the Carpmaster or Method Master rods you will need to balance them with a small, light reel as the more balanced the setup feels the greater your casting accuracy will be. The Aquos 4000 is the perfect partner for the short rods with its lightweight aluminium body. The Aquos 4000 has more than enough cranking power to quickly land large carp and an excellent front drag for fi sh-playing control. It will hold 150m of 0.23mm line and is ideal for casting feeders up to ranges of 40m. We recommend spooling your reel with a fast sinking, monofi lament line when fi shing commercials as you don’t want a line that snakes across the surface that can pull your feeder out of place. The Carpmaster range of mono has been specifi cally designed for modern commercial feeder fi shing.


www.fi shmatrix.co.uk: : :

88

:: :: ::: : :

IN-LINE OPEN

ELASTICATED HOOPED

COMMERCIAL WATERS

HOOPED OR OPEN?Firstly when choosing a method feeder you have two distinct styles in the Evolution range. The Hooped Method Feeders feature small plastic hoops down both sides, which enable your groundbait or softened micro pellets to grip better. This makes the hooped version better for medium and long range as well as fi shing in deeper water. The Open Method Feeder doesn’t have any bait retaining hoops and is designed for close range and shallow water as it releases the bait quickly. Because both styles don’t have ribs across the feeder, they can be used with larger hookbaits without the fear of the bait getting crushed or trapped.

METHOD FEEDER FISHINGTHE MOST WIDELY USED FEEDER ON THE COMMERCIAL MATCH FISHING SCENE, THE METHOD FEEDER IS OFTEN THE MOST EFFECTIVE APPROACH FOR MATCH AND PLEASURE ANGLERS.


1

3

2

www.fi shmatrix.co.uk: : :

9

4

5

6

3

4

5

6


INLINE OR ELASTICATED METHOD FEEDERS?Both the hooped and open method feeders in our Evolution range are available in standard inline and also in Elasticated versions. The standard In-Line version has a unique design that enables the feeder to be changed quickly without the need to break down the end rig and this style of method feeder is allowed on all venues. Elasticated method feeders feature a removable stem with an elastic core that absorbs head shaking and lunges when a fi sh is under the rod tip and therefore help to reduce the chances of hookpulls occurring. The Matrix elasticated feeders come supplied with two stems giving you a heavy and light elastic option so you can pick the elastic that best suits the size of fi sh you will be angling for.

METHOD FEEDER FISHING

1 - In-Line Hooped Method Feeder

2 - Rubber Quick Bead

3 - Tail Rubber

4 - Carp Bander Hook

5 - Bait Aligner

6 - Power Micron Hooklength 4” (10cm)

IN-LINE HOOPED

ELASTICATED OPEN

EVOLUTION METHOD FEEDER BENEFITS Works almost instantly on commercial waters

Can be used with groundbait or softened pellets

Easy to use with the Squeeze and Feed Mould

In-line version has quick change design

Hooped and Open designs for different situations


10

: : :

1. To start setting up, thread a tail rubber onto your main line.

5. Place the Rubber Quick Bead through the same hole in the base.

6. Position your mainline through the slot in the feeder stem.

7. Push your tail rubber down over the complete stem.

8. The In-Line Method Feeder is now ready for loading with bait.

2. Tie a Rubber Quick Bead to the end of your line using a strong knot.

3. Attach a short hooklength to the Rubber Quick Bead.

4. Place your hook through the hole in the base of the feeder.

QUICK CHANGEAs previously mentioned the Evolution In-line Method Feeder features a unique slot in the back and this slot enables you to change the size and style of feeder in seconds, without having to cut and re-tie any knots. This means you can change from a Hooped to an Open Method, or even an Evolution Pellet Feeder or Evolution Lead Clip in seconds. Another massive advantage of the Evolution is the fact the hooklength exits the feeder at the top meaning the hookbait stays closer to the free feed once it disperses from the feeder, than on conventional in-line designs.

COMMERCIAL WATERS

The Evolution Quick Change System is brilliant when catching lots of fi sh

SETTING UP AN IN-LINE METHOD FEEDER



11


11

1. Start by placing your hookbait into the bottom of the Squeeze and Feed mould.

2. Now add your chosen groundbait and/or dampened pellets into the mould.

3. Fill the mould to the top and then push your feeder face down into the free feed.

4. Turn the mould upside down, give the sizes a squeeze and you’re ready for action!

The deep moulded ends accommodate most Method feeders and provide more movement for compression

The unique design of the base, with central slots and compression sides, enables the feeder to be ‘squeezed’ out

Squeeze and Feed Moulds are available in three sizes. Designed for Evolution Method Feeders they also work with most other makes of method feeder.

EASY LOADING...In order to load an Evolution Method Feeder perfectly you will need to use one of the ingenious Squeeze and Feed Method Moulds. These also work with most other method feeders on the market. Simply place your hookbait into the mould and then fi ll it with the groundbait or damp pellets of your choice. Push the feeder face down into the mould, turn the mould over and squeeze both sides. The method feeder will release from the

mould perfectly loaded, with the hookbait on top and ready for casting. The Squeeze and Feed Mould is deeper than other moulds on the market, which allows you to use more bait on the feeder should you want.

LOADING A METHOD FEEDER USING THE SQUEEZE AND FEED MOULD


: : :

12

:: :: :: www.fi shmatrix.co.uk: : :

12

COMMERCIAL WATERS

WHY IS THE PELLET FEEDER SO GOODIn recent years pellet feeders have started to dominate certain waters and can be used with pellets of all sizes. This makes them very useful on venues where small fi sh are a problem as pellets will create less cloud than groundbait and not attract the nuisance species so easily. Due to its design, the Evolution In-Line Pellet Feeder holds less bait than a method feeder and offer more of a ‘drip feeding’ approach. In addition, due to the shape of a pellet feeder, the feed can only exit from one side, which concentrates the fi sh into

THE PELLET FEEDERDESIGNED FOR USE WITH DAMPENED PELLETS, THE PELLET FEEDER WILL AT TIMES BE A BETTER OPTION OVER THE MORE COMMONLY USED METHOD FEEDER...

feeder right where the hookbait will be placed. A further benefi t of this style of feeder is that your hookbait is positioned inside the feeder amongst your free feed and therefore allows you to cast tight to features such a reeds and overhanging foliage without any danger of the hook becoming snagged. This is a massive advantage when fi shing very tight to cover. Another benefi t of the pellet feeder is that due to its shape it retains more bait as it falls through the water making it a great option when fi shing in deep water as it ensures everything arrives on the bottom intact.


www.fi shmatrix.co.ukwww.fi shmatrix.co.uk: : :

13

THE PELLET FEEDER

HOW IT WORKSThe Evolution Pellet Feeder features a scoop design, which makes loading very easy. Simply scoop the feeder into your dampened pellets until 2/3rds full, then push your hookbait into the feeder and fi nish fi lling with free offerings giving it a fi rm press to compact everything. Once the feeder has landed on the bottom the water will cause the compressed pellets to start expanding out of the feeder leaving a neat little pile of bait giving the fi sh the perfect target to home in on. Pellet feeders can also be used with other alternative baits such as chopped meat, hard pellets and hemp by adding a tiny amount of groundbait ‘cap’ to seal the feeder.

QUICK CHANGEWe currently make two sizes of pellet feeder (small and medium) and thanks to our unique Evolution design, which also features on our method feeders, you can swap from one size of feeder to another or one style of feeder to another without breaking anything down.

2. Scoop a small amount of softened pellets into the feeder.

3. Place the pellet hookbait onto the part loaded feed.

1. Mount your hook pellet onto a Matrix Bait Aligner.

4. Cover with a fi nal layer of pellets and squeeze to secure it in the feeder.

USING A PELLET FEEDER

EVOLUTION PELLET FEEDER BENEFITS Can be used with all sizes of softened pellets

Easy to fi ll scoop design

Reduced the amount of liners and small fi sh activity

Has quick change design for swapping feeder size

Holds feed in place until it’s on the bottom


14

: : :

THE IN-LINE CAGE FEEDERIN-LINE CAGE FEEDERS ARE PERHAPS LESSER USED THAN METHOD AND PELLET FEEDERS BUT REALLY COME INTO THEIR OWN WHEN YOU ARE USING LARGE PARTICLES LIKE SWEETCORN AND CHOPPED MEAT OR WHEN FEEDING HARD PELLETS...

COMMERCIAL WATERS

IN-LINE CAGE FEEDER BENEFITS Can be used with all sizes of particles

Targets larger sized carp

Reduces the problems of small fi sh

Feeds just enough bait for one fi sh at a time



1

3

2

4

5

15

1

3

2

4


IN-LINE CAGE EXPLAINED...The best way to think about using an In-line Cage feeder is to relate it to using a small pole pot on the end of your pole where you introduce just a small amount of bait each time you drop in. Our In-Line Cage feeders come in small and medium sizes only and are the correct size to introduce enough bait for one feeding carp at a time, which also makes them perfect for winter fi shing when you don’t need as much feed. A further benefi t of the In-Line Cage is that it allows you to use larger hookbaits than you would on a method feeder,

THE IN-LINE CAGE FEEDER

making it the ideal tactic when trying to select larger fi sh. When using an In-line cage feeder it can sometimes take a little time to get the swim going (certainly a bit longer than when using a method feeder with groundbait), but by using larger particles the fi sh you catch will usually be much bigger. When using this type of feeder the use of a short hooklength (around 4ins/10cm), which keeps the hookbait close to the feeder, is very important.

1 - In-Line Cage Feeder

2 - Tail Rubber

3 - Rubber Quick Bead

4 - Power Micron 0.20mm, 4”(10cm)

5 - Super Stop

SETTING UP AN IN-LINE CAGE FEEDER

1. To start setting up, thread a tail rubber onto your main line.

2. Thread your main line through the tube on the feeder.

3. Tie a Rubber Quick Bead to the end of your line using a strong knot.

4. Attach a short hooklength to the Rubber Quick Bead.


16

: : :

1. Tie a Super Stop onto the

hooklength line.

2. Thread the hooklength through the eye of the hook from the back to the front.

3. For most baits position the Super Stop about 12/15mm from the eye of the hook.

4. Wrap the hooklength around the shank from the eye down, 6 times.

1. Place the Super Stop onto the Needle.

2. Push the Super Stop through your hookbait.

3. Pull the Super Stop off the needle end.

4. Turn the Super Stop to secure the bait.

MAKING A SUPER STOP HAIR RIG USING A KNOTLESS KNOT

COMMERCIAL WATERS

HOOKBAIT PRESENTATIONTHERE ARE A HOST OF DIFFERENT WAYS TO PRESENT THE VARIETY OF HOOKBAITS THE MODERN COMMERCIAL FEEDER ANGLER HAS AT THEIR DISPOSAL. HERE WE LOOK AT SOME OF THE MOST POPULAR...

THE SUPER STOP HAIR RIGThe Super Stop Hair Rig is constructed by attaching a hook with a knotless knot and having a Super Stop tied to the end of the hair. These Super Stops fi t onto the end of a Super Stop Baiting Needle and can then be pushed through the core of a soft hookbait like corn or meat until

they exit the other side. The stop then rotates on the end of the hair so it sits sideways against the bait and cannot pull back through. The Hair Rig is great for presenting baits such as soft boilies, meat, worms and corn and allows the hook to sit free of the bait, which makes hooking more effi cient.


17


17

5. Thread the hooklength back through the eye from back to the front.

6. Tie a loop into the end of your hooklength and connect it to your Rubber Quick Bead.

BAIT BANDSBait bands are designed for use with pellet and small dumbbell boilie hookbaits and are a small latex band that grips around the outside of the hookbait. These can be tied to the end of a Hair Rig. To place your bait into a bait band quickly it is best to use the Matrix Bait Bander tool.

HOOKS We make a range of hooks that are designed especially for fi shing heavily stocked commercial waters and presenting hookbaits in the styles previously covered. The Carp Riggers are designed for using with the knotless knot and have a special bend on the eye to aid hooking. Also available are the Carp Bander hooks, which also have a specially shaped eye designed for using with pellet bands and Bait Alignas. Both of these hooks are barbless and super-strong.

BAIT ALIGNAThis product was inspired by the big carp market and takes the concept of a bait band to a whole new level. The Bait Aligna replaces the need for a Hair Rig and simply slides down over the eye of the hook and onto the shank. You then use your Bait Bander tool to place a pellet in the loop on the back of the Aligna. The beauty of this product is that it extends the shank of your hook to a much more aggressive angle, which means you hook more fi sh!

BOILIE SPIKESAs the name suggests this handy device is designed for using with boilie hookbaits. The boilie spike is tied directly to a very short Hair Rig and allows you to screw your boilie on without the need for a baiting needle or bait stop. This is a very quick and easy method for hooking boilies.


1918

: : : GENERAL FEEDER FISHING



1918


A TRADITIONAL APPROACHGeneral feeder fi shing covers a much wider range of waters and fi sh species, and can often be quite diffi cult to master compared to fi shing in commercial waters. However, with a few well chosen feeder rig set-ups and the correct rod and reel choice, it can be an enjoyable and productive way of fi shing. Often the venues you will be fi shing will be rivers (both small and large) and large, natural lakes, therefore fi shing at wide variety of ranges could be needed. For the purpose of this guide we have broken the general feeder fi shing approach into two categories – short/medium range and long range and we will look in detail how you can master both styles.

GENERAL FISHING INTRODUCTION GENERAL FEEDER FISHING IS USUALLY DONE ON NATURAL TYPE WATERS LIKE LAKES AND RIVERS, FISHING FOR SPECIES SUCH AS TENCH, BARBEL, CHUB, BREAM AND OTHER SILVER FISH...

BALANCED TACKLE IS ESSENTIALAs with all styles of feeder fi shing it is important to select the correct tackle for the style of fi shing you will undertake. Over the coming pages we will look at all of the essentials you will need including rods, reels, line, feeders and rigs. Whether you are fi shing at short, medium or long range there is one thing that is of utmost importance every time and that is balance! By fi shing with balanced tackle you will not only catch more fi sh but you will also enjoy your fi shing much more too...


2120

: : :

2020

GENERAL FEEDER FISHING

SHORT/MEDIUM RANGE FISHING

WHEN FISHING SHORT AND MEDIUM RANGE THERE WILL BE A NUMBER OF FACTORS THAT YOU WILL NEED TO TAKE INTO CONSIDERATION, HERE WE EXPLORE THE CRUCIAL ONES...



2120


2121

RODSThis style of feeder fi shing, usually on still waters for bream, or more recently carp, requires the use of a rod that has controlled casting power in the lower half combined with sensitivity in the tip section. This combination enables feeders to be cast accurately, whilst at the same time using small hooks and light hooklengths with confi dence. The ideal rod lengths for this type of fi shing are between 11ft (3.3m) and 13ft (3.8m), the shorter length is perfect lighter feeders and shorter range, whilst longer rods can handle larger feeders more comfortably. The Horizon S Class models are the ideal choice for this ‘traditional’ type of feeder fi shing and offer outstanding quality and versatility. The 3.3m (11ft) makes an excellent bream and skimmer rod, whilst the longer 3.6m (12ft) and 3.8m (12.8ft) offer slightly more power for increased distance casting. Because of the smooth playing action of these models, all ‘S’ Class rods can also be used for carp fi shing on open waters where increased distance casting is required. All of the ‘S’ Class rods have two equal length sections plus quiver tip design. This enables the rods to be transported made-up, but with the tip hanging next to the main section. With normal two sectioned rods the quiver tip is often under tension when transported made-up and can take on a slight, but permanent bend. The three quiver tips supplied with the ‘S’ Class are made of carbon which improves casting performance as they recover their position more quickly after the feeder has been released on the cast. Fibreglass tips are also available for anglers who prefer a more through-action tip. All Horizon S Class rods are fi tted with high quality, lightweight single leg guides for minimum impact of the rods brilliant action.

The Horizon S-Class is perfect for short/medium range feeder fi shing and not just for

bream as this catch of big roach proves

REELSFor short/medium range feeder fi shing you will need a medium-sized reel, something too small will not get you the distance you need whilst a reel that is too big will be heavy and unbalanced on your rod. With this in mind the Aquos reel in both 4000 and 5000 is ideal for anglers that wish to fi sh short/medium range. These reels are lightweight and have 6 ball bearings and a balanced rotor for smooth performance when constantly retrieving feeders. The 5.1:1 gear ratio offers the correct balance of power and speed. Both models come with shallow spools which take 150m of 0.25mm making them perfect for braid, which should be your fi rst choice of main line for this traditional style of fi shing due to its lack of stretch and therefore superior sensitivity for transmitting indication to the tip. The ideal reel for this style of general feeder fi shing is an Aquos 4000 or 5000 size with braid main line like Matrix Submerge

SHORT TO MEDIUM RANGE RODS Progressive action for casting and fi sh-playing

Powerful butt and carbon tips to improve distance

Sensitive tip section for good fi sh-playing

Perfect for braid and mono main line

Casting distance from 20 to 60 metres


22 2322

: : : GENERAL FEEDER FISHING

FEEDER SELECTIONThe open-end feeder is available in both a wire cage and plastic format and are designed for use with groundbait and is a very popular design with bream anglers and also anglers fi shing International feeder matches where the use of method feeders are banned.


23


2322


WIRE CAGE FEEDERSWire cage versions are more robust and release the groundbait more quickly than plastic feeders, making them perfect for shallow water or when a very quick release of bait is required. Because of their design, they also release a small amount of groundbait as they fall through the water, so by using a large particle groundbait you can create a column of bait through the water that will attract fi sh into the swim. Once in the swim, the fi sh will often follow the feed down to the bottom where they will start feeding properly, at which time you can change to a plastic feeder which will release all of the groundbait on the bottom.

PLASTIC FEEDERS The plastic version are best used with a fi ne particle groundbait and are perfect for carrying a lot of live feed bait like casters, worms and bloodworm. The bait inside this style of feeder is less exposed to the water and therefore less bait is dispersed as it falls through the water, making them a great choice for deeper venues. A benefi t of plastic feeders is that they tend to rise from the bottom more quickly when being retrieved which is great for snaggy or weedy swims. For an even quicker lift from the bottom, you can use a Matrix Finned Feeder. The fi nned feeder will descend through the water slower and by coupling it with a long hooklength you can often pick up fi sh ‘on the drop’. A great tip is to start a session using a wire cage feeder to create a column of feed in mid water to attract the fi sh in and then to change to a plastic feeder to concentrate the feeding fi sh on the bottom.

FEEDER SET-UPSAll Matrix feeders have a swivel built into the design, which helps to reduces prevent the feeder spinning on the retrieve. This swivel can also be used to attach the feeder directly to your main line to create a free running rig which is a popular river type set-up. Alternatively, if you prefer to use a paternoster set-up for bream, the feeder can be tied (or clipped) directly to the end of the paternoster.

FEEDER SIZEA feeder needs to be heavy enough to cast the required distance and hold bottom (especially on on moving water) so make sure you take this into account. In addition the amount of bait a feeder can carry is also crucial. For most situations, especially if you’re targeting shoal fi sh like bream, a large feeder is much better as it enables you to get more bait into the swim and hold the fi sh for longer. However, in winter when the fi sh are not feeding as heavily a smaller feeder carrying less bait is a better choice.

Finned Feeders fall through the water slowly but rise up in the water quickly on the retrieve


2524

: : :


LONG RANGE FISHINGFISHING AT LONG RANGE WILL PUSH YOU AND YOUR TACKLE TO THE LIMIT AND IN ORDER TO BE SUCCESSFUL AT IT YOU NEED TO HAVE THE RIGHT TOOLS!

LONG RANGE RODS Long length for distance casting

Powerful butt with extra long spigot for stiffness

Carbon tips to improve distance casting with braid

Large guides for reduced friction

Ability to cast 70 to 120+ metres


252524


LONG POWERFUL RODSIf ever a style of fi shing required the right tools for the job, long range feeder fi shing is it. Put simple, if you aren’t using the right tackle you just can’t compete with those who are. To fi sh at ranges in excess of 80m, you need a rod that is at least 4.0m (13ft) long with the power to handle heavy feeders. The suitably named Horizon rods offer outstanding casting performance and are available in three lengths from 4.0m (13.2ft) to 4.5m (14.5ft) they are capable of casting feeders from 120g (4oz) upwards and will hit distances of more than 120m in the right hands! Horizon rods have an ultra long spigot on the short butt joint which stiffens up the lower part of the rod and creates massive power. This power is then transferred through the middle section to the forgiving tip section, resulting in enormous tip speed during the cast. To improve performance even further, large diameter SiC guides on both the rod and the quiver tips reduce friction and also enables shock leader knots to pass through freely. The two quiver tips on the Horizon rods are made from high quality carbon, which recovers very quickly on the cast again adding the distance you can achieve. Despite all of their casting power the Horizons have good playing actions too, and the tip sections combined with the quiver tips are perfectly designed for playing big bream, even on small hooks and light hooklengths.

EUROPEAN OPTIONSDesigned primarily for the European market, but equally useful in the UK, we also produce two other feeder rod ranges that can be used for long distances. The new Matrix Legend is a traditional 3 section design that covers mid to long range feeder fi shing on a wide range of venues and the Carbofl ex 130g is designed for use with the largest feeders and makes a great rod for large rivers in the UK like the Trent, Severn or Wye.

LARGE REELSTo maximise distance casting a large reel is important and the Super Feeder 5500 is designed for the job. This ‘compact’ Big Pit type reel has a large but shallow aluminium spool making it perfect for braided mainlines like the Submerge Sinking Feeder Braid. Weighing only 400g, thanks to the lightweight graphite body, this superb reel has 8 ball bearings, a roller bearing and a retrieve speed of 4.9:1 (80cm of line per handle turn). This results in a smooth, quick retrieve, which is essential when fi shing at distance. Combine a Super Feeder 5500 reel with any of the Horizon rods and Submerge Sinking Feeder Braid and you can be sure that when it comes to your tackle, you aren’t going to be left short.

BRAIDED MAIN LINEDue to the fi ne diameter and supple nature of braid it is essential when long range feeder fi shing. In addition the lack of stretch in braid means that you get excellent bite indication back on the quiver tip even when the fi sh is picking up the bait at ranges in excess of 100m away. However, due to the fi ne diameter it is essential that you couple the main line with a strong monofi lament shock leader to ensure that a heavy feeder doesn’t cause you to ‘crack-off’ on the cast. A line such as the 12lb (0.28mm) Carpmaster mono makes the ideal shock leader.


2726

: : :

26


DISTANCE FEEDERSFor fi shing at extreme range the use of a ‘bullet’ type distance cage feeder such as our aptly named Horizon is recommended. The aerodynamic shape and weight-forward design automatically adds casting distance and accuracy. The slim diameter cage behind the weight forms a smooth aerodynamic shape that when loaded is very stable in fl ight. When setting up the Horizon Feeder on your line it is worth using an Horizon Protector Sleeve as they protect the swivel of your heavy feeder from weakening the line during repeated casting. These sleeves also create a small ‘boom’ effect that holds the hooklength away from the feeder when casting, which helps to prevent tangles when giving it a massive cast.

Horizon Protector Sleeves protect the line and create a ‘boom’ effect

which reduces tangles.

Horizon Feeders have an aerodynamic weight at the base

for stability when casting.



2726


27

CAGE COAT SUCCESSCage Coats are a simple way of reducing the speed at which your groundbait leaves the feeder and they also help keep the bait in the feeder when casting. When fi shing at range you are often casting to where the fi sh are, so feeding large quantities of bait to hold fi sh in the swim isn’t so important. What is important is that there is some groundbait available close to the hookbait for the fi sh to feed on. By slowing the release of bait from the feeder you give yourself more time to get a bite, which is a huge advantage when fi shing at extreme range.

THE RIGHT GROUNDBAIT MIXCasting at extreme range puts a lot of pressure on the groundbait in the feeder and if your mix isn’t right it will come out in fl ight. The design of the Horizon Feeder helps prevent this because the weight at the base of the feeder offers quite a bit of support as the cast is made. As a general rule your groundbait mix needs to be damper (and therefore stickier) than your normal mix and make sure you press in fi rmly into the feeder.

Essential kit for the modern long range feeder fi shermen

HORIZON FEEDER BENEFITS Aerodynamic shape for extreme distance casting

Bomb shaped weight at front for stability

Can be used with Cage Coats to slow down feed

Tough metal wire construction

Excellent in smaller sizes for twitching baits

Cage Coats can be cut to different sizes before fi tting to suit different feed rates


2928

: : :

28


PRESENTING A HOOKBAITHERE WE EXPLORE THE MOST EFFECTIVE WAYS OF PRESENTING YOUR HOOKBAITS WHEN FEEDER FISHING IN A MORE TRADITIONAL, GENERAL STYLE...


2928


29

www.fi shmatrix.co.ukwww.fi shmatrix.co.ukwww.fi shmatrix.co.uk

HAIR RIG OPTIONSMore anglers are now using pellets as feed for general feeder fi shing, especially for bream and barbel and the hair rig offers the best presentation of a pellet hookbait. The Feeder Rigger Method Hair Rigs pre-tied hooks come with a pellet band on the hair and can be used for general feeder fi shing, as well as method feeder fi shing.

BAIT ALIGNAFor those anglers that wish to take the concept of the Hair Rig to another level you can of course use our Bait Alignas (that were originally designed for commercial water fi shing) for presenting a pellet hookbait. These simply thread down the hooklink and over the eye of the hook to extend the shank at an aggressive angle that helps to hook fi sh and prevent hook pulls. The Bait Aligna has a small loop on the back that holds the pellet and is loaded simply by using a Bait Bander tool.

Unique fl attened section increases strength and holds baits like chopped worms and casters securely

DIRECT HOOKINGThe simplest, most basic way to present a natural bait is to place it directly onto the hook. This is commonly done when using natural baits such as maggots, casters, bloodworm, chopped worm and corn. Often the hook will be completely masked by the bait, reducing the chances of the fi sh being spooked by the hook. For small baits it is best to use a spade-end hook as they weigh less than eyed hooks and have less impact on the bait. There are several hooks in the Matrix range that are suitable for feeder fi shing with small natural baits, with the most popular being the All Round and Super Match. For inert baits like chopped worms and casters our unique SW Feeder hook features a fl attened section that holds the bait on the shank more securely. This is very useful when fi shing at long range where the force of the cast can sometimes move the bait out of position.


30

1

23

4

: : : SET UP CORRECTLY

FEEDER HARDWARETHE CORRECT HARDWARE (FEEDER ARMS AND RESTS) CAN MAKE LIFE MUCH EASIER. THE CORRECT PLACING OF YOUR ROD IS VERY IMPORTANT AND STABILITY IS ALSO A KEY FACTOR WHEN FEEDER FISHING.

SET UP CORRECTLYSetting up correctly when feeder fi shing is very important. The correct positioning of your rod for maximum bite detection is the most important thing, followed by comfort. Also, having your bait positioned correctly for easy feeder fi lling makes life easier and quicker.

FEEDER ARMSMatrix make a brilliant feeder arm called the 3D Mega Feeder Arm. This will fi t onto all 25mm, 30mm and 36mm seatbox legs, is fully adjustable and telescopic, and offers rock solid stability thanks to the twin arm design. The 3D Mega Feeder Arm also has a 90° upturned end which

1 - 3D EVA Butt Rest2 - 3D Mega Feeder Arm3 - Side Stop Feeder Rest4 - 3D 6 Box Side Tray With Cover


31


31

BAIT PLACEMENTMatrix offers a wide range of bait placement options. There are Aluminium side trays, which offer a large rock-solid base for groundbait bowls and bait tubs. The new 3D 6 Box version comes with a removable cover that protects your bait from rain or sun. There are also Groundbait Bowl and Hoop systems in various sizes which fi t onto seatbox legs and are designed just for groundbait, these are great as secondary bait placement. A new release for this year is the 3D EVA Side Tray which comes in two sizes and has a protective EVA lip around the outer of the tray. These trays have been designed to use with the Matrix EVA Rectangular Groundbait Bowl and standard sized bait tubs and are perfectly sized for maximum effi ciency.

keeps the line away from the arm when the rod is in position, reducing the chance of snagging. This rest can be used in a low position for stillwater fi shing or pointing upwards for big river fi shing where line needs to be kept out of the water.

FEEDER RESTSThere are three different front rests in the Matrix range to suit personal preference. The Side Stop Feeder Rest has an upturned ‘ball’ end which prevents the rod being pulled in when fi shing for carp. The main part of this rest in also profi led with small bumps which give extra stability to the rod when in position. There is also a fl at version of this rest without upturned end. This rest works well on commercials and is also popular with traditional feeder fi shing anglers fi shing for bream. Finally there is the extra long 60cm Large Feeder Rest. This has a smooth main part which allows for very small rod movements to get the perfect position. This is a popular rest in Europe when bream fi shing.For supporting the butt of the rod the perfect solution is the 3D EVA Butt Rest. This short armed rest fi ts all seatbox legs and has a simple EVA top which is wide enough for easy rod placement but small enough to be unobtrusive.

The 3D Mega Feeder Arm can be used in an upright position for river feeder fi shing

3D UNIVERSAL FITTINGAll Matrix 3D accessories fi t 25mm, 30mm and 36mm seatbox legs making them suitable for almost all seatboxes.

Use a side tray to keep everything close to hand

30mm

36mm

25mm


: : :

32

3D EVA BUTT REST• Universal 3D Snag-Free fitting

• Protective EVA foam coating

• Flat design allows for instant positioning

• GMB078

SIDE STOP FEEDER REST• 90° bent end prevents rod from being pulled in when Method

feeder fishing

• Infinite rod positioning along main part


• GAC309

FEEDER RESTS• Modern design rod rest head

• Infinite rod positioning for feeder fishing


• Large 60cm GAC301

• Standard GAC206

3D MEGA FEEDER ARM• Universal 3D Snag-Free fitting

• Adjustable 116cm - 200cm length

• Very stable even with heavy feeder rods

• Fully adjustable for river and stillwaters

• Swan neck keeps line away from the feeder arm

• Interlocking pivot points reduce movement

• Easy to use locking collar for rest heads

• GMB074

FEEDER HARDWARE

Large 60cm

Standard

ACCESSORY POUCH• Zip top EVA Accessory Pouch

• Perfect for a wide range of accessories

• 18cm x 18cm x 10cm

• 90% EVA / 10% Other Fibres

• GLU051 • Clear GLU050

BAIT BUCKET SET• Large plastic bucket

with lid, inner plastic groundbait bowl and groundbait riddle

• 20lt Capacity

• GBT007



33

EVA RECTANGULAR GROUNDBAIT BOWL• Medium sized fold flat groundbait bowl

• Fits perfectly on EVA Side Tray

• Shallow depth for easy feeder filling

• 35cm x 25cm x 10cm

• Main outer fabric: 90% EVA / 10% Other Fibres

• GLU052

EVA ROUND BOWLS• Waterproof EVA material

• 5 and 10 litre bowls have open top

• 17 and 44 litre bowls have zip lid and carry handles

• 44 litre bowl takes blue Matrix Groundbait Bucket

• Main outer fabric: 90% EVA / 10% Other Fibres

• 5 Litre GLU029 • 10 Litre GLU030

• 17 Litre GLU031 • 44 Litre GLU032

3D 6 BOX SIDE TRAY WITH COVER• 6 box capacity side tray with cover

• Universal 3D Snag-Free fitting with additional legs for support

• Protects bait from rain and sun

• Fold flat cover design for easy transport

• Cover available separately and fits most sizes of side tray. 100% Polyester

• 6 Box Tray and Cover GMB080

• Cover GMB081

3D EVA SIDE TRAY• Universal 3D Snag-Free fitting

• Protective EVA foam surround

• Use as a main or additional side tray

• Medium tray has 2 Snag-Free fittings

• Small 40cm x 40cm GMB075

• Medium 40cm x 60cm GMB076

3D SNAG-FREE GROUNDBAIT BOWL & HOOP • Round groundbait bowl with lid, fitted on Snag-Free box

accessory hoop with Snag-Free knuckle

• Available in small (30cm) and Large (38cm) sizes.

• Waterproof material with sealed seams and zip lid

• Square GMB058

• Round Small GMB056 • Large 40cm x 60cm GMB057


: : :

34

Glassfibre quivertips with lightweight guides

Short cork/EVA handle for accurate casting. Shorter rods have shorter handles

Glassfibre quivertips with Glassfibre quivertips with

Mid-length cork/EVA handle with screw down reel seat hood for secure reel placement

Single leg intermediate guides for improved actionSingle leg intermediate guides for improved actionimproved action

COMMERCIAL FEEDER RODS

METHOD MASTERThe new Method Master rods have been designed to fi sh modern method feeders, Pellet feeders and cage feeders on man-made ‘commercial’ waters. Ideal for casting up to 40 metres, all models have a through action with slightly more power in the butt section for easier casting and better fi sh-playing control of larger carp. Outstanding value for money.

CARPMASTERDesigned for modern match methods on commercial waters, all models can be transported in a made-up state. The Feeder rods have a unique design which eliminates the joint in the fi sh-playing area of the rod. All feeder rods come with a revolutionary EVA transport holder block which holds the sections parallel in transit.

• Designed for method feeder fishing

• Through action with additional power in butt section

• Perfect for man-made carp waters

• SiC lined single leg intermediate guides for good balance

• Equal length sections for easy made-up transport

• Supplied with two tips, 1 x carbon, 1 x fibreglass

• Line rating 4lb - 12lb

• Designed for Commercial water carp fishing

• Long middle section for perfect fish=playing action

• Lightweight, strong double and single leg SiC guides

• Short handle for easy manoeuvring

• Cork/EVA handle with soft-touch screw down hood reel seat

• Supplied with interchangeable tips

• Line rating 4lb - 10lb



35

Separate butt section provides increased power and casting control

Strong, lightweight guides suited to the rods length

Long ‘playing’ section has no joints in the fish-playing area for a smooth action

Strong, lightweight guides Long ‘playing’ section has no joints in the fish-playing area

Strong, lightweight guides suited to the rods length

Two-piece equal length butt and tip section for better transfer of power when casting and a smoother fish-playing action

1 x carbon tip and 1 x glassfibre tip for versatile bite detection

CODE// DESCRIPTION//GRD053 Carpmaster 8ft Little Pig (2.4m)GRD052 Carpmaster 10ft MK2 (3.0m)GRD002 Carpmaster 9ftGRD020 Carpmaster Tip 0.75 ozGRD021 Carpmaster Tip 1 ozGRD022 Carpmaster Tip 1.5ozGRD023 Carpmaster Tip 2.0 oz

CODE// DESCRIPTION//GRD085 Method Master 9ft (2.7m)GRD086 Method Master 10ft (3.0m)GRD087 Method Master 11ft (3.3m)GRD088 Method Master Tip 1oz glass GRD089 Method Master Tip 1.5oz carbon


36

: : :

36

Long cork/EVA handle for better leverage when distance casting

Carbon tips for increased bite detection at range. Larger guides for free passage of shock leader knots

Mid-length cork/EVA handle for accurate casting

Fine taper carbon quivertips with lightweight guides for increased sensitivity

GENERAL FEEDER RODS

HORIZON S CLASSMatrix Horizon S Class feeder rods are designed for traditional feeder fi shing on a wide variety of waters, fi shing up to a distance of 60 metres. Built using equal length sections for easy made-up transport, the S Class is supplied with 3 carbon tips and is perfect for bream and skimmer fi shing with open end feeders.

• Available in 3.3m 3.6m and 3.8m lengths

• High modulus carbon blank with top quality single leg guides

• Designed for fishing up to 60m

• Perfect for bream and skimmer fishing on natural venues

• High gloss black finish

• Rods break down to two equal lengths with tip removed

• Supplied with 3 carbon quivertips

HORIZONMatrix Horizon feeder rods are designed for long range feeder fi shing up to 100+ metres on large stillwaters, rivers and European ship canals. Built using ultra-high modulus carbon, the butt section has an extra long spigot joint for increased casting power in the lower part, large guides for reduced line friction and top quality carbon tips for increased casting distance and improved bite detection.

• The ultimate long range distance feeder rods

• High modulus carbon blank

• Separate long handle butt section with extra long spigot joint for increased stiffness and casting power

• Large low profile guides for maximum casting performance are suitable for mono or braid

• Cork/EVA handle with soft-touch screw down hood reel seat


37


37

Top quality over-sized guides for smooth flow of line when casting. Advanced lining suitable for mono or braid

High quality guides. Double leg on the lower blank and single leg towards the tip

Longer middle and top section for smoother power transfer and fish-playing

Two-piece equal length butt and tip section for better transfer of power when casting and a smoother fish-playing action

CODE// DESCRIPTION//GRD054 Horizon S Class Feeder 3.3mGRD055 Horizon S Class Feeder 3.6mGRD069 Horizon S Class Feeder 3.8m

CODE// DESCRIPTION//GRD058 Horizon S Class Tip C1GRD059 Horizon S Class Tip C2GRD060 Horizon S Class Tip C3GRD072 Horizon S Class Tip C4 2ozGRD073 Horizon S Class Tip C5 1ozGRD074 Horizon S Class Tip C6 1.5oz

CODE// DESCRIPTION//GRD016 Horizon Carbon Tip 2ozGRD017 Horizon Carbon Tip 3ozGRD018 Horizon Carbon Tip 4ozGRD043 Horizon Fibreglass Tip 1.5ozGRD044 Horizon Fibreglass Tip 2.0ozGRD045 Horizon Fibreglass Tip 3.0oz

CODE// DESCRIPTION//GRD007 Horizon Feeder 4.0mGRD008 Horizon Feeder 4.3m

GRD009 Horizon Feeder 4.5m


38

: : :

AQUOS® REEL• Designed for feeder fishing

• 6 stainless steel ball bearings

• Lightweight aluminium graphite body

• Balanced rotor

• Advanced bail arm shape for quicker line pick-up

• Multi-disc front drag for fish-playing

• Gear ratio - 5.1:1

• Retrieve - 4000 - 74cm, 5000 - 77cm per handle turn

• Capacity - 0.25mm/150m

• Aquos 4000 - GRL009

• Aquos 5000 - GRL011

GENERAL FEEDER RODS | REELS

Mid-length cork/EVA handle with screw down reel seat hood for secure reel placement

High quality guides. Double leg on the lower blank and single leg towards the tipHigh quality guides. Double leg on the lower


39


SUPER FEEDER 5500 REEL• Mid-sized ‘Big Pit’ reel for long range casting

• 8 stainless steel ball bearings

• Roller Bearing

• Lightweight graphite body

• Shallow aluminium spool for use with braid

• Rotor brake stops rotor moving when bail arm open for casting

• Spare spool

• 80cm line retrieve per handle turn

• Weight - 400g

• Gear ratio - 4.9:1 - 80cm per handle turn

• Capacity - 0.26mm/150m

• Super Feeder 5500 - GRL008

LEGENDThe new Legend Feeder rods are designed for medium and long range feeder fi shing. Available in three lengths, the new Legend range has three equal length sections for easy transport and covers a wide variety of feeder fi shing applications.

• Designed for medium and long range feeder fishing

• High modulus carbon blank with top quality guides

• 3 piece equal length sections

• Extra long butt section spigot joint for casting power

• Perfect for bream and skimmer fishing on natural venues

• High gloss black finish

• 3 carbon quivertips

Carbon quivertips with increased diameter guides for easy casting

High quality carbon blank with powerful butt and middle section for improved casting performance

High quality carbon blank with powerful butt and middle section

Carbon quivertips with increased diameter Carbon quivertips with increased diameter


40

: : :

IN-LINE OPEN METHOD FEEDER• In-line design conforms to all fishery rules

• Unique quick change design

• Perfect for short range work with pellets

• Aerodynamic shape for accurate casting

• Available in Medium, Large

IN-LINE HOOPED METHOD FEEDER• In-line design conforms to all fishery rules


• Hoops around the rim hold groundbait or pellets securely without inhibiting the use of large hookbaits


• Available in Small, Medium, Large

ELASTICATED HOOPED METHOD FEEDER• Elasticated Method Feeder

• Hoops around the rim hold groundbait or pellets securely


ELASTICATED OPEN METHOD FEEDER• Elasticated Method Feeder

• Hoops around the rim hold groundbait or pellets securely

• Open version for close fishing


EVOLUTION® PELLET FEEDER• Totally in-line and fish friendly


• Open scoop cut back at the correct angle to release pellets easily

• Available in Small and Medium

IN-LINE CAGE FEEDER• In-line cage feeder

• Perfect for large particle baits like sweetcorn

• Available in Mini, Small and Medium

COMMERCIAL FEEDERS | GENERAL FEEDERS

MINI


41

www.fi shmatrix.co.ukwww.fi shmatrix.co.uk

OPEN END FEEDERS• Made from tough tinted plastic

• Available in three sizes with weights up to 60g

• Built in swivel to reduce tangles


FINNED FEEDERS• Fin design creates slower fall through water

• Rises up in the water more quickly on the retrieve

• Made from tough tinted plastic

• Available in three sizes with weights up to 60g



WIRE CAGE FEEDERS• Made from 4mm wire mesh

• Available in four sizes with weights up to 100g


• Excellent value for money

• Available in Small, Medium, Large, Extra Large

STAINLESS STEEL CAGE FEEDERS• Made from tough 6mm stainless steel mesh


• Available in Small, Medium, Large, Extra Large

CAGE COATS• Shrink tubing to cover Horizon feeders

• Shrinks when hot water is applied

• Reduces rate of feed from feeder

HORIZON® FEEDERS• Designed for extreme distance casting

• Stainless steel mesh



: : :

42

PROTECTOR SLEEVES• Designed for use with free running rigs

• Produces neat tangle-free solution

• Use with Protector Snap Swivels

• 5 per pack

• Standard GAC299 • Small GAC300

QUICK CHANGE LEAD CLIP• Quick change clip to change from

feeders to leads in seconds

• 5 per pack

• GAC210

RUBBER QUICK BEAD• Rubber bead with quick change facility

• Perfect for the Evolution In-line Method feeder

• 5 per pack

• GAC171

TAIL RUBBERS• Replacement tail rubbers

• Available in Standard and Extra Tough (XT)

• 8 per pack

• Standard GAC214 • Extra Tough GAC321

FEEDER ACCESSORIES | BAITING ACCESSORIES

SNAP LINK & SLEEVE• For connecting feeders to a paternoster

• Reduces tangles and line damage

• 5 per pack

• GAC320



43


PROTECTOR SNAP SWIVEL• Designed for use with the Protector

Sleeves

• Can also be used as normal snap swivels

• 10 per pack

• GAC207

FEEDER BEAD• Free flowing plastic bead with built in

link swivel

• Great for running feeders

• 5 per pack

• GAC170

3 BARREL SUPER SWIVEL• Reduces line twist when feeder fishing

• Much more efficient than single barrel swivels

• 10 per pack

• GAC169

SUPER STOPS• Blunt rounded ends prevent bending

• Micro size for small soft 6-8mm baits

• Large size for big baits and boilies

• Micro GAC189 • Small GAC190

BOILIE SPIKES• Designed for use with hard boilies

• Ties directly onto a Hair Rig

• Improves baiting speed

• GAC308

SUPER STOP BAIT NEEDLE• Designed for use with the Super Stops

• Large easy grip handle

• GAC192

BAIT ALIGNAS• For use with hard pellets

• Creates the perfect angle for presenting pellets

• Standard GAC298 • Large GAC340

PULLER BAIT NEEDLES• Thin wire needle with rounded bent end

• Perfect for pulling bands into soft baits

• GAC193

BAIT BANDER• Easy to use tool for banding pellets

• Comes with additional bait bands

• GAC302


: : :

44

CARP BAGGERS• Barbless spade-end with

in-turned point• Hybrid round/crystal bend• Strong wire with

bronze finish

• For carp and other large fish

CARP RIGGERS• Barbless, eyed with

in-turned point• Hybrid round/crystal bend• Strong wire with bronze finish• Perfect for using a

knotless knot

BANDER HOOKS• Barbless eyed with in-turned

point• Hybrid round/crystal bend• Straight eye for aggressive

line angle• Perfect for bait bands and

Matrix Bait Aligners

SW FEEDER HOOKS• Barbed spade-end with

hybrid bend

• Unique flattened section on the bend

• Medium wire, bronze finish

ALL ROUND HOOKS• Barbed spade-end with

round bend

• Medium wire, nickle finish

• Perfect for a wide range of methods and baits

FEEDER RIGGERS• Micro barbed eyed with

in-turned point

• Hybrid round/crystal bend

• Medium wire with bronze finish

• For feeder fishing

CODE SIZEGHK105 12GHK104 14GHK103 16GHK102 18GHK101 20

CODE SIZEGHK033 12GHK034 14GHK035 16GHK036 18




CODE SIZE GHK100 10GHK099 12GHK098 14GHK097 16GHK096 18GHK095 20

HOOKS | HAIR RIGS | HOOKLENGTH STORAGE



4545

CARP RIGGERS HAIR RIGS• Barbless eyed

• In-turned point


• Strong wire bronze finish

• 4” (10cm) long

FEEDER RIGGERS HAIR RIGS• Micro barbed eyed

• In-turned point


• Medium wire bronze finish

• 4” (10cm) long

HOOKLENGTH RETAINER 50CM+• Designed for longer hooklengths

• Rounded ends prevent line damage

• Blue - GAC220 • Yellow - GAC257

HOOKLENGTH RETAINER 7.5 - 25CM• Stores hooklengths 7.5cm, 10cm, 15cm, 20cm and 25cm

• Fits perfectly in Matrix Drawer Units

• Available in blue or yellow colours

• Blue - GAC221 • Yellow - GAC258

SUPER HOOKLENGTH UNIT• Supplied with 10 hooklength retainers

• Fits on all Matrix Seatboxes

• Depth 30mm

• GMB046

HOOKLENGTH CASE WITH RETAINERS• Protective plastic case containing two Hooklength Retainers

• 7.5cm - 25cm Retainer GAC223

• 50cm+ Retainer GAC222



HOOKS | HAIR RIGS | HOOKLENGTH STORAGE


46

: : ::: :: ::

CARPMASTER MONO• Extra strong mono reel line

• Controlled stretch

• Outstanding knot strength

• Diameters from 0.18mm to 0.28mm

• Low visibility green colour

SUBMERGE FEEDER BRAID• Sinking braid with smooth outer surface

• Designed for extreme distance casting

• Thin diameter with high knot strength

• Dark neutral colour

POWER MICRON• Accurate diameter hooklength and pole rig line

• Very strong and supple for better presentation

• Outstanding knot strength

• All popular diameters

• Low visibility clear colour

LINE


47


FRESH:::THINKING

www.facebook.com/FishMatrixwww.youtube.com/user/ifi shmatrix

ULTIMATE SEATBOX SYSTEMSUPER 36


SHALLOW DRAWER UNIT

SHALLOW TRAY UNIT

90MM TRAY UNITDEEP DRAWER UNIT

SHALLOW DRAWER UNITSHALLOW DRAWER UNITSHALLOW DRAWER UNITSHALLOW DRAWER UNIT

WINDER TRAY UNIT

LINE



MATRIX TV - SEE IT HERE FIRSTAcknowledgementsLive Photography: Lewis Porter. Translations: German: Bastian Reetz & Christoph Schultz | Dutch: Mark Noorman & Roelof Schut | French: Stefan Hanff | Italian: Daniele Pellacani Hungary: Csaba Balasi | Czech: Jakub Prudik | Poland: Cezary Karolczak

Fox International reserve the right to modify or alter prices or specifications in any respect without prior notice. Technical data and specification correct at time of going to press.

All weights and dimensions are approximate. E. & O.E. Copyright reserved.

UK HEADQUARTERS: 56-58 Fowler Road, Hainault Business Park, Essex, IG6 3UTEUROPEAN DISTRIBUTION CENTRE: Transportzone Meer, Riyadhstraat 39, 2321 Meer, Belgium

MATRIX DIGITAL MEDIA - WWW.FISHMATRIX.CO.UK WWW.FACEBOOK COM/FISHMATRIX | WWW.YOUTUBE.COM/USER/IFISHMATRIXVISIT FISHMATIX.CO.UK FOR ALL OF THE LATEST VIDEOS, NEWS AND TIPS FROM MATRIX ANGLERS.

AAA274


matrix feeder fishing guide uk

Documents