materials catalogue - canada
DESCRIPTION
ÂTRANSCRIPT
Materials Catalogue
www.troteclaser.com
Laserable and Rotary
Trotec offers a wide variety of materials to choose from providing unlimited potential for your business.
TroLase
TroLase Metallic Plus and TroLase Metallic
TroLase Reverse
LaserFlex
TroLase Lights
TroGlas and Acrylic Sheets
TroLase ADA Signage
TroLase Thins
TroLase Textures
Armor Core
TroPly
TroPly Metallic Plus and TroPly Metallic
TroPly Satins
TroPly Ultra
TroPly HiGloss
TroPly Ultra Reverse
TroPly HiGloss Reverse
Anodized Aluminum
Aluminum
Brass
Steel, Nickel, Sublimation Metals
DuraBlack™
Alumamark™
Laser Marking Compounds
Laser Rubber
Paints for Acrylic
Badge Accessories
Braille Accessories
Tapes, Velcro & Adhesive
Cable Tags
Trophy Shields & Pet Tags
Engraving Cutters
Diamond Tools
Fabrication Equipment
JRS Sign Frames
Flat Bed Lasers
Galvo Lasers
Exhaust Systems & Supplies
Cut-to-Size Services
Overview Features
Catalogue Contents
Laser Materials
Rotary Materials
Metals
Accessories
Machines
& Services
Laser material Plastic materials with an acrylic core can be worked with the laser. Many metals can also be marked with the laser but cannot be cut.
Exterior use This material is UV-resistant and suitable for outdoor use. Of course, it can also be used for indoor applications.
Engraving materials This material (usually with ABS core) is suitable for use with me-chanical engraving devices.
Indoor use This material is not suitable for long-term, unprotected use in outdoor areas (UV exposure may cause discolouration).
Reverse engraving This material is engraved from the back using mirrored graphics. Afterwards, the en-graving can be inlaid with colour or backlit, so that the engraved image is visible from the front.
Any colour deviations between the images shown in the Catalogue and actual items are due to electronic depiction or typographical reasons and are not considered mistakes.
4
6
8
10
11
12
14
16
18
19
20
22
24
26
28
30
31
32
34
36
38
40
41
42
44
45
46
49
50
53
54
56
57
58
62
66
67
68
69
70
4
Lase
rab
le M
ater
ials
TroLase
TroLase is an UV-resistant acrylic based laminate for both indoor and outdoor applications. The thin top layer makes detailed engraving possible at high production speeds. Processing creates less residue than with other materials, which reduces the need for cleaning and minimizes processing times.
• Interior Signs• Exterior Signs• Badges• Trophy Plates• Safety Signs
Typical Use
Selected colours are also available in a 3-ply finish. The surface colour is applied to both sides of thecore, allowing for double sided signs.
Material featuresMaterial: Micro-surfaced impact acrylic, 2 ply / 3 plyFinish: matte non-glare, glossThickness: 1/32” / 1/16” / 1/8”Engraving depth: 0.003”Cutting method: laser, saw, shear**
Engraving material
Interior use
Exterior use
Laser material
Cut-to-size and individual services: see page 69
Best Sellers
Red/White1/32“
1/32“
1/32“ 1/32“1/16“
1/16“1/32“1/16“1/8“
1/16“
1/16“
1/16“
1/16“1/8“
1/16“
1/8“1/16“
1/8“1/16“
1/8“
1/8“Yellow/Black Bright Green/White
Black/White
Smoke Grey/White
Blue/White
1/32“ 1/32“1/16“ 1/16“ 1/16“1/8“ 1/8“
1/16“
White/Sky BlueWhite/Red White/Black
L704-203 L704-206 L704-209L704-206G
L602-203 L602-206 L602-209L602-206G
L512-203 L512-206 L512-209L512-206G
L206-203 L206-206 L206-209
L204-203 L204-206 L204-209L204-206G
L402-203 L402-206 L402-209L402-206GL402-209G
L312-206
L205-206
L932-203 L932-206 L932-209
Not all colour & thickness combinations are stock items, please call for availability
**Recommended for rough cutting prior to finishing. Edge quality with shear may not be acceptable for all applications.
5Visit our website: www.troteclaser.com
TroLase
Laserable M
aterials1/16“1/32“ 1/16“
1/16“
1/16“
1/16“
1/16“
1/8“
1/8“
1/8“
1/8“
Sapphire/White Light Blue/White
Purple/White
1/32“
1/16“1/8“
1/16“
1/32“1/16“
1/16“
1/16“
1/16“1/16“
1/16“
1/16“
1/16“Yellow/Red
1/8“
Burgundy/White
Orange/White
Celadon Green/White
Evergreen/White
Gloss Black/White
Matte Black/Silver
1/16“
1/16“
1/16“
1/16“
1/2“
Navy Blue/White
Pink/White
Navy Blue/Gold
Red/Gold
Pine Green/Gold
1/16“Almond/Black
1/16“
1/16“
1/16“
1/16“
Dark Brown/White
Walnut/White
Dark Walnut/White
Light Grey/White
Matte Black/Gold
Gloss Black/Gold
1/16“
1/16“
L972-206
L912-203 L912-206 L912-209
L427-206
L417-206
L422-206
L413-206
L842-206
L192-206
L002-206
L322-206
L854-206
L582-206L582-206G
L552-206
L662-206
L557-206
L617-206
L917-206
L706-206
L612-203 L612-206
L622-206 L502-203 L502-206
L562-206
L402-306L402-309
L512-306L512-309
L602-306L602-309
L704-306L704-309
L204-306L204-309
Black/White/ Black
Blue/White/ Blue
Red/White/ Red
Yellow/Black/Yellow
White/Black/ White
Red/Black
Pink/Black
1/16“
1/16“
L604-206
L664-206
1/16“
Medium Brown/White
L822-206
Dark Brown/White1/16“ L842-206
Pine Green/White
1/8“
1/32“1/16“
L912-203 L912-206 L912-209
Bright Green/White
1/8“
1/32“1/16“
L932-203 L932-206 L932-209L932-206G1/16“
1/16“Verde Green/Gold
L937-206
6
TroLase Metallic, Plus and Scratch Resistant (SR)
Lase
rab
le M
ater
ials
TroLase Metallic is an acrylic based laminate with an authentic metallic finish. The thin surface layer allowsdetailed engraving at high production speeds. TroLase Metallic Plus features a special surface coating that makes the material UV-resistant and suitable for outdoor use.The SR materials include a clear top coat which adds protec-tion against scratches, scuffing and fingerprints.
• Interior Signs• Exterior Signs (Metallic Plus)• Badges• Trophy Plates• Safety Signs
Typical Use
TroLase Metallic Plus FeaturesMaterial: Modified impact acrylic, 2 plyFinish: brushed metalThickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: laser, saw, shear*
Engraving material
Interior use
Exterior use
Laser material
TroLase Metallic & Metallic SR FeaturesMaterial: Micro-surfaced impact acrylic, 2 plyFinish: brushed or matte metalThickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: laser, saw, shear*
Engraving material
Interior use
Laser material
Cut-to-size and individual services: see page 69 Not all colour & thickness combinations are stock items, please call for availability
*Recommended for rough cutting prior to finishing. Edge quality with shear may not be acceptable for all applications.
7Visit our website: www.troteclaser.com
TroLase Metallic Plus
TroLase Metallic
Laserable M
aterials
Brushed Stainless Steel/Black
Brushed Stainless Steel/Blue
Brushed Stainless Steel/Red
Brushed Bright Nickel/Black
Brushed Ant. Gold/Black
Brushed Copper/Black
1/32“
1/32“ 1/32“ 1/32“
1/32“ 1/32“1/16“
1/16“ 1/16“ 1/16“
1/16“ 1/16“1/8“
1/8“ 1/8“ 1/8“
1/8“ 1/8“
Smooth Gold/Black
Brushed Gold/Black
European Gold/Black
Brushed Aluminum/Black
Brushed Silver/Black
Smooth Silver/Black
Brushed Copper/Black
Brushed Deep Bronze/Black
1/32“
1/32“
1/32“
1/32“
1/32“
1/32“1/16“1/8“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“1/32“
1/16“
1/8“
1/8“
1/8“
1/8“
1/8“
LMT+314-203 LMT+314-206 LMT+314-209
LMT+364-203 LMT+364-206 LMT+364-209
LMT+315-203 LMT+315-206 LMT+315-209
LMT+764-203 LMT+764-206 LMT+764-209
LMT+864-203 LMT+864-206 LMT+864-209
LMT+316-203 LMT+316-206 LMT+316-209
LMT714-203 LMT714-206 LMT714-209
LMT734-203 LMT734-206 LMT734-209
LMT754-203 LMT754-206LMT754-209
LMT354-203 LMT354-206 LMT354-209
LMT334-203 LMT334-206 LMT334-209
LMT344-203 LMT344-206 LMT344-209
LMT894-203 LMT894-206
LMT884-206
Brushed Silver/Black1/16“
Smooth Gold/Black
Brushed Copper/Black
1/16“
1/32“
334-229SR
714-229SR
894-229SR
1/16“ 344-229SR1/8“ 344-249SR
1/32“1/16“1/8“
354-219SR354-229SR354-249SR
Brushed Gold/Black1/16“ 734-229SR
European Gold/Black1/16“ 754-229SR
Brushed Brass/Black1/16“ 764-229SR
TroLase Metallic SR
Chrome/Black1/16“ LMT324-206
Smooth Silver/Black Brushed Aluminum/Black
8
TroLase Reverse
Lase
rab
le M
ater
ials
TroLase Reverse consists of transparent acrylic with a coloured coating on the back. By mirror engraving the image into the back, the coloured layer is removed during the engraving process and the material becomes transparent in these places. By using acrylic paint to inlay the engraved back, a coloured engraving is created. The smooth surface allows for easy cleaning.
• Interior Signs• Exterior Signs• Badges• Safety Signs• Information Signs
Typical Use
Material featuresMaterial: Micro-surfaced impact acrylic with back-coating, 2 plyFinish: matte non-glare, glossThickness: 1/16”, 1/8” Engraving depth: 0.003” Cutting method: laser, saw
Engraving material
Interior use
Laser material
Exterior use
Reverse
Cut-to-size and individual services: see page 69 Not all colour & thickness combinations are stock items, please call for availability
9Visit our website: www.troteclaser.com
Laserable M
aterials
Matte Clear/Red
Matte Clear/Burgundy
Matte Clear/Blue
Matte Clear/Sapphire
Matte Clear/Pine Green
Matte/Dark Brown
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
Matte Clear/White
Matte Clear/Grey
Matte Clear/Black
Matte Clear/Gold
Gloss Clear/Gold
Matte Clear/Silver
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
Gloss Clear/Silver
Matte Clear/Yellow
1/16“
1/16“
LR601-206 LR201-206LR201-209
LR621-206 LR311-206
LR701-206
LR511-206 LR401-206LR401-209
LR561-206
LR711-206
LR710-206
LR341-206LR341-209
LR340-206LR340-209
LR911-206
LR841-206
Matte Clear/Ivory1/16“ LR221-206
TroLase Reverse
1/8“ 1/8“
1/8“
Matte Clear/Aluminum1/16“ LR351-206
Matte Clear/Green1/16“ LR931-206
1/8“
Gloss Clear/Black1/16“ LR400-206
Matte Clear/Navy Blue
Matte Clear/China Blue
1/16“
1/16“
LR551-206
LR381-206
Matte Clear/Parchment
Matte Clear/Celadon
1/16“
1/16“
LR811-206
LR971-206
Tips
10
LaserFlex
Lase
rab
le M
ater
ials
Cut-to-size and individual services: see page 69 Not all colour & thickness combinations are stock items, please call for availability
LaserFlex is a transfer film for customizing textiles. The laser can reproduce even the finest details with intricate designs. Once the artwork has been engraved or cut out on the laser unit, the design is applied to the textiles using a transfer press. LaserFlex is characterized by good opacity and high elasticity.
•Customization of T-shirts and fabric bags• Recommended for cotton, polyester, blend-ed fabrics• Less suitable for nylon and coated textiles• Flex on flex is possible for multi colour designs
Typical Use
Material featuresMaterial: Polyurethane on transfer paperSurface: matteThickness: 0.004” Engraving depth: 0.004” Cutting method: laser, shear, scissorsSheet Size: 16.5” x 11.75”
Laser material
Reverse
White
Red
Green
Yellow
Blue
Black
Orange
Navy Blue
0.004“
0.004“
0.004“
0.004“
0.004“
0.004“
0.004“
0.004“
623SFR 236 623SFR 238 623SFR 241
623SFR 239 623SFR 240 623SFR 243
623SFR 242 623SFR 237
LaserFlex has been specially designed to not only be cut but also to be weeded by laser. This means that it is no longer necessary to mechanically remove excess material between graphics and letters or along edges. Recommended transfer conditions: Temperature: 165 °C Duration: 17 secondsLaserFlex film can be washed at up to 60 °C. Any residues can be removed by washing.
Sample Kit0.004“ 623SPK 054
11Visit our website: www.troteclaser.com
Laserable M
aterials
TroLase Lights
TroLase Lights are highly flexible and robust films with adhesive coating on the back, which can be laser engraved. The self-adhesive film adheres perfectly to various materials such as metals, plastic, rubber, and wood and makes it a popular material in industrial and recognition applications.
• Exterior & Interior Signs• Badges• Trophy Plates•Vinyl Lettering• Labels / Stickers• Labelling of packages
Typical Use
Material featuresMaterial: Micro-surfaced 2 ply plastic, with adhesiveFinish: gloss, brushed metalThickness: 0.004” Engraving depth: 0.001” Cutting method: laser, shearSheet Size: 12” x 24”
Engraving material
Interior use
Exterior use
Laser material
Black/White
White/BlackBrushed Silver/Black
Brushed Brass/Black
Black/Gold
Yellow/Black
Brushed Bronze/Black
Smooth Silver/Black
Smooth Gold/Black
Black/Silver
0.004“
0.004“0.004“
0.004“
0.004“
0.004“
0.004“
0.004“
0.004“
0.004“
LL61-201
LL62-201LL63-201
LL64-201
LL65-201
LL68-201
LL69-201
LL73-201
LL74-201
LL75-201Red/White0.004“ LL60-201
Brushed Copper/Black0.004“ LL89-201
12
TroGlas and Acrylic Sheets
Lase
rab
le M
ater
ials
TroGlas is a transparent, extruded acrylic with a coloured coat-ing on the back. By mirror engraving the back and inlaying the engraved areas with colour, an elegant finish is created. Light effects can be achieved with lighting. Cast acrylic is suitable for applications with both rotary and laser engraving. The clear provides excellent transparency, and all colours laser engrave white and cut with a gloss edge.
• Interior Signs• Exterior Signs• Badges• Safety Signs•Display Identification
Typical Use
TroGlas Features
Acrylic Sheets Features
Material: Micro-surfaced impact acrylic with back-coating, 2 plyFinish: glossThickness: 1/8” / 3/16” / 1/4” Engraving depth: 0.003” Cutting method: laser, saw
Material: Cast acrylic, 1 plyFinish: gloss, matte, texturedThickness: 1/8” / 3/16” / 1/4”Cutting method: laser, saw
Engraving material
Engraving material
Interior use
Interior use
Exterior use
Exterior use
Laser material
Laser material
Reverse
Cut-to-size and individual services: see page 69 Not all colour & thickness combinations are stock items, please call for availability
Reverse
13Visit our website: www.troteclaser.com
TroGlas
Acrylic Sheets
Laserable M
aterials
Gloss/White
Gloss/Green
Gloss/Gold
Gloss/Red
Gloss/Black
Gloss/Blue
Gloss/Silver
1/8“
1/8“
1/8“
1/8“
1/8“
1/8“
1/8“
3/16“
3/16“
3/16“
3/16“
3/16“
3/16“
3/16“
TG4-200 TG5-200
TG4-600 TG5-600
TG4-500 TG5-500
TG4-931 TG5-931
TG4-400 TG5-400
TG4-330 TG5-330
TG4-710 TG5-710
Clear ClearClear
1/8“ 3/16“1/4“
624CL0118
624CL0177624CL0236
White 1/8“ 624F10235705
Flourescent Green1/8“ 623AUS 105
Mirrored Bronze 1/8“ 623AUS 110
Mirrored Blue1/8“ 623AUS 111
Flourescent Blue1/8“ 623AUS 162
Flourescent Yellow1/8“ 623AUS 161
Mirrored Pink1/8“ 623AUS 114
Flourescent Red1/8“ 623AUS 160
Mirrored Gold1/8“ 623AUS 120
Mirrored Orange1/8“ 623AUS 120
Mirrored Silver1/8“ 623AUS 106
Mirrored Green1/8“ 623AUS 155
Mirrored Purple1/8“ 623AUS 157
Textured Clear1/8“ 623AUS 158
Mirrored Red1/8“ 623AUS 156
Clear/Black Cast1/8“ 623AUS 164
Red Marble1/8“ 623AUS 109
Blue Marble1/8“ 623AUS 107
Green Marble1/8“ 623AUS 108
Speckled Rose1/8“ 623AUS 192
Speckled Black1/8“ 623AUS 196
All sheets stocked as 12“ x 24“ (approximate). 24“ x 24“ and 24“ x 48“ available on request.
Mirrored Black1/8“ 623AUS 122
14
TroLase ADA Signage
Lase
rab
le M
ater
ials
TroLase ADA Signage is a single-layer, dyed, acrylic based ma-terial. It is ideal for functional signage in indoor and outdoor areas, for cutting out letters or for creating 3-dimensional signs by mounting cut-out shapes on a base plate. In addition, it is an ideal material for signs featuring Braille.
• Exterior & Interior Signs•ADA Compliant• 3-dimensonal Signs•Model making• Letters & Symbols
Typical Use
Material featuresMaterial: Single-ply modified acrylicSurface: matteThickness: 1/32” / 1/16” / 1/8” Cutting method: laser, saw, shear, rotary engraver Engraving
materialInterior use
Exterior use
Laser material
Cut-to-size and individual services: see page 69 Not all colour & thickness combinations are stock items, please call for availability
For Braille Accessories see page 49
Best Sellers
Tips
15Visit our website: www.troteclaser.com
TroLase ADA Signage
Laserable M
aterials
Yellow
White
Bright White
Light Grey
Charcoal GreyClear
Black
Silver
1/32“
1/32“
1/32“1/32“
1/32“
1/16“
1/16“
1/16“
1/16“
1/16“1/16“
1/16“1/32“
1/32“
1/32“
1/8“
1/8“
LS701-103 LS701-106
LS201-103 LS201-106
LS204-103 LS204-106 LS204-109
LS305-103 LS305-106
LS307-103LS307-106LS307-109
LS101-103 LS101-106LS101-109
LS401-103 LS401-106 LS401-109LS401-103ADH
LS304-103
Red
Burgundy
Green
Blue
Marine Blue
1/32“
1/32“
1/32“
1/32“1/16“
1/16“
1/16“
1/16“
1/8“ 1/8“
LS601-103 LS601-106 LS601-109
LS602-103LS602-106LS602-109
LS901-103 LS901-106
LS501-103 LS501-106 LS501-109
LS502-106
Order TroLase ADA Signage with self-adhesive film applied to the back. This allows you to easily mount letters cut-out from the material plate on base plates or walls. During assembly use the cut material plate as a tem-plate for spacing and as a line level. A few tips for best results: - Materials must be even and without bends or distortions. - A cutting grate should always be used when cutting plastics, in order to lift the material. - Remove the protective film, in order to prevent discolouration or excessive smoke. - If excess smoke results, then too much energy is being used. In this case increase the speed.
1/8“1/8“
1/32“
1/16“1/8“
Dark Brown1/32“1/16“
LS803-103LS803-106
16
TroLase ThinsLa
sera
ble
Mat
eria
ls
TroLase Thins are thinner and more flexible than tradition-al engraving materials. As a result, it is particularly suited to applications on curved surfaces. The thin surface coating allows detailed engraving at high production speeds. The acrylic based material is available in matte colours as well as shiny and brushed metal finishes.
• Interior Signs• Badges• Trophy Plates• Safety Signs• Bottle Labels• Business Cards
Typical Use
This material is very often used with a magnetic film applied to the back. To see more information about magnetic films, please turn to page 50.
Material features Material: Micro-surfaced 2 ply plastic, with or without adhesiveFinish: matte non-glare, gloss, brushed metalThickness: 0.02” Engraving depth: 0.003” Cutting method: laser, saw, shear
Engraving material
Interior use
Laser material
Cut-to-size and individual services: see page 69 Not all colour & thickness combinations are stock items, please call for availability
Best Sellers
17Visit our website: www.troteclaser.com
TroLase ThinsLaserab
le Materials
Black/White
Brushed Gold/Black Brushed Aluminum/Black
Brushed Copper/Black
White/Black
Europ. Brushed Gold/ Black
0.02“
0.02“
0.02“ 0.02“
0.02“0.02“
LT402-202
LT734-202
LT754-202 LT894-202
LT204-202LT354-202
Red/White
Purple/White
White single ply
Celestial Blue./Gold Port Wine/Gold
Yellow/Black
Blue/White
0.02“
0.02“
0.02“
0.02“ 0.02“
0.02“
0.02“
LT602-202
LT582-202
LT202-102
LT577-202 LT677-202
LT744-202
LT512-202
Brushed Bronze/Black
Deep Bronze/ Black
Matte Black/Gold
Gloss Black/ Gold
Brushed Silver/Black
Matte Black/Silver
Black single ply
Gloss Black/ Silver
Trophy Silver/ Black
Smooth Silver/Black
Trophy Gold/ Black0.02“
0.02“
0.02“
0.02“
0.02“
0.02“
0.02“
0.02“ 0.02“
0.02“
0.02“
LT794-202
LT874-202
LT884-202
LT334-202
LT394-202
LT344-202
LT417-202
LT427-202 LT413-202
LT404-102
LT423-202
Add “-ADH“ to part number when ordering for adhesive backing.
Smooth Gold/Black0.02“ LT714-202
Verde/Gold0.02“ LT937-202
18
TroLase Textures
Lase
rab
le M
ater
ials
TroLase Textures are two-layer acrylic based materials, suitable for applications in demanding environments, where extra durability and scratch resistance are required. The textured, matte surface is non-reflective, durable and easy to clean. TroLase Textures are UV- and weather-resistant, suitable for indoor and outdoor use.
• Exterior & Interior Signs• Badges• Safety Signs•Control Panels• Industrial Applications
Typical Use
Material featuresMaterial: Co-extruded impact acrylic 2 plyFinish: textured matteThickness: 1/16” / 1/8” Engraving depth: 0.005”, 0.007” Red and YellowCutting method: laser, saw, shear
Engraving material
Interior use
OutdoorWeatherable
Laser material
Cut-to-size and individual services: see page 69
Red/White
Yellow/Black
Green/White
1/16“
1/16“
1/16“
1/8“
Sapphire/White
Royal Blue/White
1/16“
1/16“1/8“
White/Red Winter White/Blue Winter White/Black
Ash Grey/Black
Black/White
1/16“ 1/16“ 1/16“
1/16“
1/16“
1/8“
1/8“LTX642-206 LTX642-209
LTX592-206 LTS592-209
LTX244-206 LTX244-209
LTX503-206
LTX205-206LTX205-209
LTX374-206
LTX422-206 LTX422-209
LTX246-206
LTX774-206
LTX962-206
Not all colour & thickness combinations are stock items, please call for availability
Tan/Dark Brown1/16“ LTX258-206
Ash Grey/White1/16“ LTX302-206
Tangerine/White1/16“ LTX652-206
Ruby/White1/16“ LTX622-206
Yellow/Dark Brown1/16“ LTX778-206
Desert Sand/Black1/16“ LTX854-206
Coffee Bean/White1/16“ LTX892-206
Teal/White1/16“ LTX992-206
1/8“
19Visit our website: www.troteclaser.com
Laserable M
aterials
ArmorCore
ArmorCore is a laserable plastic that combines the ease of use of TroLase with the UV stability and durability of an acrylic cap. The satin finish also allows laser users to reproduce old signs created with traditional non-laserable satin plastic.
• Exterior & Interior Signs• Badges• Safety Signs•Control Panels• Industrial Applications
Typical Use
Material featuresMaterial: Impact acrylic 2 plyFinish: matte or brushedThickness: 1/16” Engraving depth: 0.005” Cutting method: laser, saw, shear
Engraving material
Interior use
OutdoorWeatherable
Laser material
White/Black1/16“1/16“
204-227M204-227S
White/Blue1/16“ 205-227M
205-227S1/16“
White/Red1/16“ 206-227M
206-227S1/16“
Grey/White1/16“ 312-227M
Red/White1/16“1/16“
Blue/White1/16“1/16“
Black/White1/16“1/16“
602-227M602-227S
512-227M512-227S
402-227M402-227S
Orange/Black1/16“ 614-227M
Yellow/Black1/16“1/16“
704-227M704-227S
Green/White
Pine Green/White 1/16“1/16“ 1/16“
932-227M932-227S912-227M
20
TroPlyR
ota
ry M
ater
ials
TroPly features a thin surface coating, which allows for intri-cate details and fast engraving without shading effects. The reflection-free surface allows clear and easy-to-read designs to be created of the very smallest engraved images.
• Interior Signs• Badges• Trophy Plates• Safety Signs• Information Signs
Typical Use
Selected colours are also available in a 3-ply finish. The surface colour is applied to both sides of thecore, allowing for double sided signs.
Material featuresMaterial: ABS, 2 plySurface: matteThickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: saw, cutting bits
Engraving material
Interior use
Cut-to-size and individual services: see page 69
Best Sellers
Red/White
Yellow/Black
Blue/White
White/Red
White/Black
Black/White
1/32“
1/8“
1/8“
1/8“
1/8“
1/8“
1/32“
1/32“
1/32“
1/32“1/16“
1/16“
1/16“
1/16“ 1/16“
1/16“
P602-203 P602-206 P602-209
P744-203 P744-206 P744-209
P512-203 P512-206 P512-209
P206-206P204-203 P204-206 P204-209
P402-203 P402-206 P402-209
Not all colour & thickness combinations are stock items, please call for availability
21Visit our website: www.troteclaser.com
TroPlyR
otary M
aterials
Orange/White
Bright Green/White
Pine Green/White
Navy Blue/White
Yellow/Red
Sapphire/White
White/Green
White/Pine Green
White/Blue
Ivory/Dark Brown
Almond/Black
Smoke Grey/White
Light Grey/Black
Walnut/Bright White
Engl. Walnut/ Bright White
Dark Walnut/White
Black/Bright White
Red/Bright White
1/8“
1/8“
1/8“
1/8“
1/8“
1/8“
1/8“
1/32“
1/32“
1/32“
1/32“
1/32“
1/32“
1/32“
1/16“
1/16“
1/16“
1/16“1/16“
1/16“
1/16“
1/16“
1/16“
1/32“1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/32“1/16“
Burgundy/White
Light Grey/White
1/32“1/16“
1/16“
Blue/Bright White1/32“1/16“
Purple/White1/32“1/16“
Light Blue/White1/16“
P642-203 P642-206
P622-203 P622-206 P622-209
P612-203 P612-206
P932-203 P932-206 P932-209
P912-203 P912-206 P912-209
P552-206P706-206
P502-206 P502-207
P572-203 P572-206
P582-203 P582-206
P562-206
P172-206
P192-206
P002-206
P209-206
P269-206
P205-206 P205-209
P228-203 P228-206
P854-203 P854-206 P854-209
P312-203 P312-206 P312-209
P322-206
P324-203 P324-206
P412-203 P412-206
Black/White/Black
White/Black/White
Red/White/Red
Blue/White/Blue
1/8“
1/8“
1/8“
1/8“
P402-309
P602-309
P204-309
P512-309
1/32“1/16“
Dark Brown/White1/16“
Medium Brown/White
P822-203 P822-206
P842-206
Light Grey/Blue1/16“ P325-206
Pink/White1/16“ P662-206
Pink/Black1/16“ P664-206
Yellow/Black/Yellow1/8“ P774-306
1/16“Celadon Green/White
P972-206
22
TroPly Metallic Plus and TroPly Metallic
Ro
tary
Mat
eria
ls
TroPly Metallic is characterized by a precious metal look and is ideal for the finest details with clear contrast as well as fast and cost-efficient processing.TroPly Metallic Plus features a special protective layer, which is particularly resistant to scratches and wear.
• Interior Signs• Badges• Trophy Plates• Safety Signs• Information Signs
Typical Use
TroPly Metallic Plus Features
TroPly Metallic Features
Material: ABS, 2 plyFinish: brushed or matte metalThickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: saw, cutting bits
Material: ABS, 2 plyFinish: brushed or matte metalThickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: saw, cutting bits
Engraving material
Engraving material
Interior use
Interior use
Cut-to-size and individual services: see page 69 Not all colour & thickness combinations are stock items, please call for availability
23Visit our website: www.troteclaser.com
Ro
tary Materials
TroPly Metallic Plus
Brushed Aluminum/Black
Brushed Silver/Black
Deep Bronze/Black
European Gold/Black
Brushed Gold/Black
Brushed Brass/Black
Smooth Silver/Black
Smooth Gold/Black
1/16“
1/16“ 1/16“
1/16“
1/8“1/16“
1/16“
1/16“
1/16“1/8“
1/8“
1/8“
PMT+734-206 PMT+734-209
PMT+334-206 PMT+884-206
PMT+754-206 PMT+754-209
PMT+764-206
PMT344-206PMT344-209
PMT+714-206 PMT+714-209
PMT+354-206 PMT+354-209
TroPly MetallicDeep Bronze/ Black
European Gold/Black
1/32“
1/32“
1/8“1/16“1/16“
1/16“
Brushed Silver/Black
Brushed Copper/Black
Smooth Gold/Black
1/32“1/32“
1/32“
1/8“
1/8“
1/16“1/16“
1/16“
Silver/Black
Brushed Gold/Black1/32“
1/32“
1/8“
1/8“
1/16“
1/16“
Brushed Aluminum/Black
PMT884-206
PMT894-203 PMT894-206
PMT344-203 PMT344-206 PMT344-209
PMT334-203 PMT334-206 PMT334-209
PMT354-203 PMT354-206 PMT354-209
PMT714-203 PMT714-206 PMT714-209
PMT754-203 PMT754-206
PMT734-203 PMT734-206 PMT734-209
1/16“1/16“
Brushed Silver/Blue
Brushed Gold/Blue
PMT325-206PMT725-206
Brushed Bronze/White1/16“ PMT872-206
1/8“
1/16“
Brushed Aluminum/Blue
PMT+355-206
Brushed Copper/Black1/16“ PMT+894-206
Brushed Bronze/White1/16“ PMT+872-206
Smooth Silver/Black1/32“ PMT+344-203
PMT+344-2061/16“
24
TroPly Satins
Ro
tary
Mat
eria
ls
TroPly Satins are available in a large range of colours, in a brushed gloss finish. The solid top layer provides increased protection against scratches or abrasion. Specially designed for indoor use, where a warm appearance in combination with durability and resistance is required.
• Interior Signs• Badges• Safety Signs• Information Signs
Typical Use
Selected colours are also available in a 3-ply finish. Here, in addition to the surface and core layers there is an extra layer in the colour and thickness of the surface layer applied on the back.
Material featuresMaterial: Acrylic cap / ABS core, 2 plyFinish: brushed glossThickness: 1/32” / 1/16” / 1/8” Engraving Depth: 0.012“Cutting method: saw, cutting bits, shear
Engraving material
Interior use
Cut-to-size and individual services: see page 69 Not all colour & thickness combinations are stock items, please call for availability
25
TroPly Satins
Ro
tary Materials
Orange/White
Orange/Black
Yellow/Black
Green/White
Purple/White
Polar White/Black
White/Black
White/Red
Grey/White
Grey/Black
1/32“
1/8“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“1/16“
Sapphire/White
White/Green
Red/Black
White/Blue
1/16“
1/16“ 1/16“Airforce Blue/White
Red/White1/16“
Black/White1/16“
PS209-206
PS402-206
PS206-206
PS204-203 PS204-206
PS234-206PS234-209
PS304-206
PS302-206PS582-206
PS532-206 PS205-206
PS512-206
PS932-206
PS704-206
PS614-206
PS612-206
PS604-206
PS602-206
Black/White/Black
White/Black/White
Yellow/Black/Yellow
White/Red/White
White/Blue/White
Red/White/Red
Burgundy/White/ Burgundy
Green/White/Green
Blue/White/Blue
1/8“
1/16“
1/8“
1/8“ 1/8“
1/8“
1/8“
1/8“
1/8“
1/8“
PS402-309PS602-309
PS622-309
PS234-306 PS234-309
PS704-309
PS512-309
PS206-309 PS205-309
PS932-309
Best Sellers
Visit our website: www.troteclaser.com
Burgundy/White1/16“ PS622-206
26
TroPly Ultra
Ro
tary
Mat
eria
ls
TroPly Ultra is an UV stable laminate for indoor and outdoor applications in a matte, reflection-free finish. The deeper top layer provides increased protection against damage and makes TroPly Ultra the preferred material for use in harsh environments. TroPly Ultra can also be cut with a laser.
• Exterior & Interior Signs• Badges• Safety Signs•Control Panels• Braille Signage
Typical Use
Material featuresMaterial: Laminated impact acrylic, 2 plySurface: matteThickness: 1/16” / 1/8” Engraving Depth: 0.015“Cutting method: saw, cutting bits, shear
Engraving material
Interior use
Exterior use
Cut-to-size and individual services: see page 69 Not all colour & thickness combinations are stock items, please call for availability
Best Sellers
27Visit our website: www.troteclaser.com
TroPly Ultra
Ro
tary Materials
Red/White
Vintage Gold/Black
1/16“1/8“
Blue/White1/16“1/8“
1/16“
Sapphire/White1/16“
Ruby/White
Vintage Silver/Black
1/16“
1/16“1/8“
Yellow/Black
Black/White
1/16“1/8“
1/16“1/8“
Safety Yellow/ Black1/16“1/8“
Bright Green/White1/16“1/8“
Black/Gold1/16“
White/Red1/16“1/8“
White/Blue1/16“1/8“
White/Black1/16“1/8“
PU602-206 PU602-209
PU632-206
PU704-206 PU704-209
PU794-206 PU794-209
PU932-206 PU932-209
PU204-206 PU204-209
PU205-206 PU205-209
PU206-206 PU206-209
PU562-206
PU512-206 PU512-209
PU417-206
PU402-206 PU402-209
PU384-206 PU384-209
PU774-206
Hunter Green/White1/16“ PU992-206
TroPly HiGloss
Ro
tary
Mat
eria
ls
TroPly HiGloss is an UV-resistant laminate with a high-gloss surface suitable for indoor and outdoor use. A thick top layer provides extra protection and resistance to scratches and abrasion. The material consists of modified acrylic and is therefore suitable for laser cutting. Due to the thickness of the top layer, signs should be created with mechanical engraving devices for best results.
• Exterior & Interior Signs• Badges• Safety Signs• Information Signs• Braille Signage
Selected colours are also available in a 3-ply finish. The surface colour is applied to both sides of thecore, allowing for double sided signs.
Material featuresMaterial: Laminated impact acrylic, 2- / 3 plyFinish: glossThickness: 1/16” / 1/8” Engraving Depth: 0.015“ Cutting method: saw, cutting bits, shear
Engraving material
Interior use
Exterior use
28 Cut-to-size and individual services: see page 69
Typical Use
Not all colour & thickness combinations are stock items, please call for availability
TroPly HiGloss
29Visit our website: www.troteclaser.com
Ro
tary Materials
Red/White Vintage Gold/
Black1/16“1/8“ 1/16“
1/8“
Sapphire/White1/16“
Yellow/Black
Vintage-Silver/ Black
1/16“1/8“
Blueberry Blue/White1/16“
1/16“1/8“
Safety Yellow/Black
Black/White
1/16“1/8“
1/16“1/8“
Green/White1/16“1/8“
White/Red1/16“1/8“
Teal Green/White
Black/Gold
1/16“
White/Blue1/16“1/8“
1/16“
Blue/White
Ruby/White
Ivory/Dark Brown
1/16“1/16“
1/16“
1/8“
White/Black1/16“1/8“
PH602-206 PH602-209
PH204-206 PH204-209
PH562-206
PH774-206 PH774-209
PH704-206 PH704-209 PH542-206
PH794-206 PH794-209 PH384-206
PH384-209
PH932-206 PH932-209
PH402-206 PH402-209
PH962-206
PH206-206 PH206-209
PH417-206PH512-206 PH512-209
PH632-206
PH228-206PH205-206 PH205-209
Black/White/ Black
White/Black/ White
White/Red/ White
Red/White/ Red
Green/White/ Green
Blue/White/ Blue
1/8“
1/16“
1/8“
1/16“
1/16“
1/16“1/8“1/8“
PH402-309
PH602-306 PH602-309
PH204-306 PH204-309
PH512-306
PH206-309 PH932-306
Best Sellers
30
TroPly Ultra Reverse
Ro
tary
Mat
eria
ls
TroPly Ultra Reverse consists of transparent acrylic with a coat-ing on the back. A transparent image is created by engraving the coloured back. This engraving can then be filled with colours. The protective transparent acrylic in combination with the relatively deep coloured layer on the back makes TroPly Ultra resistant to adverse external influences and easy to clean.
• Exterior & Interior Signs• Badges• Safety Signs• Information Signs• Braille Signage
Typical Use
Material featuresMaterial: Laminated impact acrylic, 1- / 2 plySurface: matteThickness: 1/32” / 1/16” / 1/8” Engraving Depth: 0.015“ Cutting method: saw, cutting bits, shear
Engraving material
Interior use
Exterior use
Reverse
Cut-to-size and individual services: see page 69
Matte/Burgundy
Matte/YellowMatte/Green
Matte/Ivory
Clear single ply1/32“1/16“
1/16“
1/16“1/16“
1/16“
1/16“
1/8“
Matte/China Blue1/16“
Matte/Blueberry Blue
Matte/Black
1/8“1/16“1/16“Matte/Sapphire
Matte/Red
Matte/Vintage Silver
1/8“
1/16“
1/16“
PUR601-206
PUR631-206
PUR701-206PUR911-206
PUR231-206 PUR381-206
PUR541-206
PUR561-206PUR101-103 PUR101-106 PUR101-109
PUR401-206 PUR401-209
PUR371-206 PUR371-209
Matte/White
1/8“1/16“ PUR201-206
PUR201-209
Not all colour & thickness combinations are stock items, please call for availability
31Visit our website: www.troteclaser.com
Ro
tary Materials
TroPly HiGloss Reverse
TroPly HiGloss Reverse is polished to a high gloss finish and can be marked on the back, thus creating high-quality signage products. The material is UV stable and weather-proof and therefore suitable for indoor and outdoor use. A 3D effect can be achieved by using an appropriate milling cutter. The material is ideal for backlighting.
• Interior Signs• Exterior Signs• Information Signs• Badges• Signs with advertising impact
Typical Use
Material featuresMaterial: Acrylic, 1- / 2 plyFinish: glossThickness: 1/16” / 1/8” Engraving Depth: 0.015“Cutting method: saw, cutting bits, shear
Engraving material
Interior use
Exterior use
Reverse
Clear/Red
Clear/Burgundy Clear/Ivory
PHR600-206PHR600-209
PHR630-209 PHR560-209 PHR230-209
1/8“
1/8“ 1/8“ 1/8“
1/16“
Clear/Sapphire
Clear/Yellow
Clear/Black
Clear/Blueberry Blue
Clear/Green Clear/ Teal Green
Clear/Blue
Clear single ply
Clear/White
PHR700-206PHR700-209
PHR540-206PHR540-209
PHR900-206PHR900-209 PHR910-209
PHR400-206PHR400-209
1/8“ 1/8“
1/8“ 1/8“ 1/8“
1/16“ 1/16“
1/16“ 1/16“
PHR510-206 PHR510-209
PHR200-206PHR200-209
PHR100-106PHR100-109
1/16“1/8“
1/8“
1/16“
1/16“
Clear/SilverPHR370-2091/8“
1/8“
32
Anodized Aluminum M
etal
s
Anodized or colour anodized aluminum is suitable both for engraving with a CO2 laser and with mechanical engraving devices. The protective anodized coating remains intact during laser processing. The image contrast is caused by the removal of the coloured coating and almost photographic qualities can be achieved. A detailed, white engraved image is created.
• Interior Signs• Type Plates• Serial Numbers• Barcodes• Signs with advertising impact
Typical Use
Anodized Aluminum featuresMaterial: Anodized Aluminum, colour coating over silver aluminumFinish: matte, glossThickness: 0.02” / 0.025” / 0.04” / 0.125”Cutting method: saw, cutting bits, shear
Engraving material
Interior use
Laser material
Not all colour & thickness combinations are stock items, please call for availability Cut-to-size and individual services: see page 69
33Visit our website: www.troteclaser.com
Anodized AluminumM
etals
Satin Silver
Satin Gold
Satin Blue
Satin Red
0.025“
0.02“
0.02“
0.02“
9722029-19722629-19729090-19729029-1
9722030-1
9722028-1
9722032-1
Satin Black0.025“ 9722033-1
Stock size 12”x 24” sheets, 24” x 48” available by special order
Bright Gold0.02“ 9722021-1
Bright Silver0.02“ 9722022-1
0.04“ 9722628-1
0.125“0.04“ 0.04“ 9722633-1
0.05“
34
AluminumM
etal
s
Aluminum sheets allow for engraving to a bright silver finish. It is lightweight and easy to cut, providing an economical solution for industrial and awards applications.
• Interior Signs• Trophy and Plague Plates•Machinery ID•Memorial Plates
Typical Use
Laserable Aluminum FeaturesMaterial: Aluminum, colour coating over silver, black, white or gold aluminumFinish: matte, glossThickness: 0.02” / 0.025”Cutting method: saw, cutting bits, shear
Engraving material
Interior use
Laser material
Exterior use
Not all colour & thickness combinations are stock items, please call for availability Cut-to-size and individual services: see page 69
Aluminum FeaturesMaterial: Aluminum, colour coating over silver aluminumFinish: matte, gloss, brushed Thickness: 0.02” / 0.025”Cutting method: saw, cutting bits, shear Engraving
materialInterior use
Exterior use
35Visit our website: www.troteclaser.com
Laserable Aluminum
Aluminum
Metals
Gloss Black/Silver0.02“ 1033-1
Bright Silver/Silver0.02“ 1022-1
Satin Blue/Silver0.025“ 3030-1
Bright Red/Silver0.025“ 3026-1
Bright Gold/Silver0.02“ 1021-1
Opaque Brown/Silver0.025“ 3037-1
Satin Copper/Silver0.025“ 3038-1
Dark Green/Silver0.025“ 3039-1
Satin Green/Silver0.025“ 3031-1
Opaque Maroon/Silver0.025“ 3035-1
Matte Black/Silver0.025“ 3041-1
Opaque Yellow/Silver0.025“ 3044-1
Opaque Orange/Silver0.025“ 3036-1
Opaque White/Silver0.025“ 3034-1
Opaque Red/Silver0.02“ 3043-1
Bright Purple/Silver0.025“ 3023-1
Royal Blue/Silver0.025“ 3040-1
Satin Gold/Silver0.02“ 1028-1
Satin Silver/Silver0.02“ 1029-1
Satin Violet/Silver0.025“ 3027-1
Silver Metallic Black/Silver0.02“ 1059-1
Matte Silver/Black0.02“ 1429-1
Black/White0.02“ 1433-1
White/Black0.02“ 1434-1
Matte Gold/Black0.02“ 1428-1
Gloss Black/Gold0.02“ 1095-1
Black/Silver0.02“ 1097-1
Bright Red/Silver0.025“ LASER RED ALU
Dark Green/Silver0.025“ LASER GRN ALU
Bright Blue/Silver0.025“ LASER BLU ALU
Purple/Silver0.025“ LASER PPL ALU
12” x 24” sheets, 24” x 48” available by special order
12” x 24” sheets, 24” x 48” available by special order
Gloss Black/Silver0.025“ 3033-1
Satin Silver Double Sided0.04“ 5029-1
Black/Silver Exterior0.04“ 5095-1
36
BrassM
etal
s
• Exterior & Interior Signs• Type Plates• Serial Numbers• Barcodes• Signs with advertising impact
Typical Use
Engraving material
Interior use
Not all colour & thickness combinations are stock items, please call for availability Cut-to-size and individual services: see page 69
Brass FeaturesMaterial: Clear or coloured lacquer coating over gold brassFinish: matte, gloss, brushedThickness: 0.02” / 0.025”Cutting method: saw, cutting bits, shear
Engraving material
Interior use
Laserable Brass FeaturesMaterial: Coloured lacquer coating over gold brassFinish: glossThickness: 0.016”Cutting method: saw, cutting bits, shear
Engraving material
Interior use
Premium Engraver’s Leaded Brass FeaturesMaterial: Clear lacquer or metallic plating over brassFinish: satin, glossThickness: 0.02” / 0.025” / 0.125” / 0.04” / 0.062”Cutting method: saw, cutting bits, shear
Brass is a premium material that results in a lustrous gold finish when engraved. Made from a combination of copper and zinc, it can be oxidized to produce black text. Premium Leaded Brass has a small amount of lead and a much higher copper to zinc ratio which makes it easier to engrave and oxidize to a truer black.
Laser material
37Visit our website: www.troteclaser.com
Laserable BrassM
etals
Gloss Black/Gold0.02“ 8013-1
Bright Red/Gold0.02“ BRIGHT RED BRS
Blue/Gold0.025“ BLUE BRASS
Brown/Gold0.025“ BROWN BRASS
Bright Gold/Gold0.02“ 8011-1
Satin Gold/Gold0.025“ 8012-1
Dark Green/Gold0.025“ GREEN BRASS
Maroon/Gold0.025“ MAROON BRASS
Matte Black/Gold0.025“ MATTE BLK BRS
Opaque Red/Gold0.025“ RED BRASS
Purple/Brass0.025“ PURPLE BRASS
White/Gold0.025“ WHITE BRASS
Royal Blue/Gold0.025“ ROY BLU BRASS
Satin Gold Double-Sided Brass0.025“ 8050-1
Gloss Black/Brass0.016“ 6013-1
Classic Marble Blue/Brass0.016“ 5323-1
Classic Marble Grey/Brass0.016“ 5342-1
Classic Marble Green/Brass0.016“ 5322-1
Classic Marble Red/Brass0.016“ 5335-1
12” x 24” sheets, 24” x 48” available by special order
12” x 24” sheets, 24” x 48” available by special order
Premium Engraver’s Leaded Brass12” x 24” sheets, 24” x 48” available by special order
Satin Yellow0.02“ 8020-1
Satin Yellow0.04“ 9110-1
Satin Yellow0.025“ STN LEAD BRAS
Satin Yellow0.062“ 9030-1
Satin Yellow0.125“ 9081-1
Bright Yellow0.04“ 9120-1
Satin Silver/Gold0.02“ STN SIL BRASS
Satin Copper/Gold0.02“ SATIN COPPER
Brass
38
Steel, Nickel and Sublimation MetalsM
etal
s
Brass coated steel offers the finished look of brass at an economical price. Stainless Steel can be rotary engraved and the unlacquered steel is ideal for engraving with the Cermark product line. Nickel Silver is ideal for oxidizing and for sublimation.
• Exterior & Interior Signs• Type Plates• Serial Numbers• Barcodes• Signs with advertising impact
Typical Use
Brass Coated Steel FeaturesMaterial: Steel with brass plating, with or without colour coatFinish: gloss, brushedThickness: 0.015” / 0.016”Cutting method: saw, cutting bits, shear
Engraving material
Interior use
Laser material
Exterior use
Not all colour & thickness combinations are stock items, please call for availability Cut-to-size and individual services: see page 69
Stainless Steel and NickelMaterial: Stainless Steel type 430, type 304, or Nickel SilverFinish: gloss, brushedThickness: 0.015”/0.018”/0.020”/0.022”/0.029”/ 0.050”Cutting method: saw, cutting bits, shear
Engraving material
Interior use
Exterior use
Sublimation Metals featuresMaterial: Aluminum, steelFinish: gloss, brushedThickness: 0.02” / 0.025” / 0.032” / 0.04” / 0.062” / 0.125”Cutting method: saw, shear
Engraving material
Interior use
Laser material
Exterior use
Sublimatable Metals incorporate a high quality coating which accepts maximum dye transfer with crisp detail. Most can be engraved after printing for additional personalization.
•Name Badges•Awards• Photographic Reproduction• POP Displays
Typical Use
Sublimatable Metals
Recommended Heat Setting: 380 degrees F, 35 seconds, with medium pressure.Our Unlacquered stainless steel can be engraved to black using a FIber laser or CO2 laser and Cermark compound. Nickel can be engraved the same way, or diamond dragged and oxidized to produce black text. Nickel and lacquered steel can also be sublimated.
39Visit our website: www.troteclaser.com
Stainless Steel and Nickel
Laserable Brass Coated Steel M
etals
Satin SilverLacquered0.015“ 7021-1
Sublimation
0.018“ 4136-1
0.018“ 7051-1 0.022“ 7050-1
For black engravings must use Thermark
12” x 24” sheets, 24” x 48” available by special order
Bright SilverUnlacquered
Satin SilverUnlacquered
Satin NickelSilver
0.05“ 7061-1 0.029“ 7055-10.05“ 7060-1
Gloss Black/Brass0.015“ 7113-1
Gloss Red/Brass0.015“ BRS LASER RED
Gloss Blue/Brass0.016“ BRS LASER BLU
Laser Sub. White/Brass0.015“ 7134-1
Gloss Purple/Brass0.015“ BRS LASER PPL
Opaque Blue/Brass0.015“ 7123-1
Opaque Red/Brass0.015“ 7116-1
Classic Marble Green/Brass0.015“ 6322-1
Opaque Green/Brass0.015“ 7122-1
Classic Marble Red/Brass0.015“ 6335-1
Classic Marble Blue/Brass0.015“ 6323-1
0.015“ 7012-1
Classic Marble Grey/Brass0.015“ 6342-1
Sublimation
Brass CoatedSteel
SublimationNon-Laserable
Sublimation MetalsSatin Gold DynasubAlum0.02“ 1128-1
Gloss White LaserSub Steel0.015“ 7134-1
Satin Silver Dynasub Alum0.02“ 1129-1
Satin Gold Sublicoat Alum0.025“ 3028-1
White Dynasub Alum0.02“ 1134-1
0.025“ 3029-1
0.025“ 3021-1 0.025“ 3022-1
Satin Silver Sublicoat Alum
Bright Gold Sublicoat Alum
Bright Silver Sublicoat Alum
Dynasub Satin Bronze Alum0.02“ 1150-10.015“ 7012-1
Satin Gold Plated Steel Subli
0.015“ 7021-1
Satin Silver Laquered S/S Subli
Premium White0.03“ 150-5570
0.020“ 4137-1
Satin StainlessSteel Type 3040.022“ 7150-1
Sublimation
0.018“ 7010-1
Satin Copper Plated Steel
SublimationNon-Laserable
12” x 24” sheets, 24” x 48” available by special order
40
Met
als
Cut-to-size and individual services: see page 69
DuraBlack™
DuraBlack™ is a coated aluminum with a black surface, which can be marked in white with a CO2 laser. Due to the addi-tional layer of protection, DuraBlack is particularly resistant to environmental influences (weathering, salt water, chemicals, etc.). DuraBlack conforms with various industrial and military standards, including MIL-STD 130N, A-A-50271 (MIL-P-514D) and MIL-STD-15024F, Type L.
• Exterior & Interior Signs• Type Plates• Badges •Materials Handling•Military Signage
Typical Use
Material featuresMaterial: Coated AluminumSurface: matteThickness: 0.005” / 0.020”Cutting method: saw, shear Interior
useLaser material
Black matte0.02“ 7585973-D | 10“ x 12“ x 0.005“ with adhesive
7585974-D | 12“ x 20“ x 0.02“ 7585976-D | 20“ x 24“ x 0.02“
Exterior use
Not all colour & thickness combinations are stock items, please call for availability
41Visit our website: www.troteclaser.com
Metals
Alumamark™
Alumamark™ is a coated aluminum with a brushed or matte metallic surface, which can be marked in black with a CO2 laser. AlumaMark is designed in such a way that even low laser power levels can create a high-contrast engraving.
• Interior Signs•Name Plates• Badges • Trophy Signs• Labels
Typical Use
Material featuresMaterial: Coated AluminumSurface: brushed or matteThickness: 0.005” / 0.020”Cutting method: saw, shear Interior
useLaser material
Matte Silver
Satin Silver
0.02“ 7585267-D
0.005“ 7585260-D** w/ adhesive
0.02“ 7585271-D*
Mirrored Silver
0.02“ 7585266-D0.02“ 7585268-D w/ adhesive0.02“ 7585270-D*
Satin Gold0.02“ 7585238-D0.02“ 7585231-D*
Mirrored Gold0.02“
7585270-D
0.02“ 7585284-DSatin Red0.02“ 7585205-D
Satin Bronze0.02“
7585285-D
Satin Brass0.02“ 7585252-D0.02“ 7585253-D*
* 20“ x 24“ ** 10“ x 12“
Satin Yellow0.02“ 7585206-D
Satin Orange0.02“ 7585207-D
Satin 5 Colour Pack0.02“ 7585209-D**
Satin Green0.02“ 7585208-D
Satin Blue0.02“ 7585209-D
Sheet Sizes: 12 x 20“, 10“ x 12“ or 20“ x 24“
42
Laser Marking Compounds
These compounds can be used to allow easier marking and higher contrast marks with a CO2 laser. The metal marking compounds produce permanent black markings, which are highly resistant to mechanical and chemical stresses as well as high temperatures. Laser Marking Compounds are available as a paste, spray or tape. The most convenient method is to apply it using a spray can. Brush application is appropriate whenever the entire surface can be coated with a single brush stroke. Spraying the paste, e.g. using an airbrush, is suitable for coating larger areas in a single step. The tape, however, is a particularly clean solution for smaller areas. The plastic marking compound allows for black marks on thermoplastics, while the compounds for ceramics and glass produce coloured marks on these materials (YAG or Fiber laser recommended).
Acc
esso
ries
Name Content Reference number
Plastic Marking LMC-12 Black for Plastic 50g 75160
Ceramic and Glass Marking
LMC-6001P Bronze 250g 75163
LMC-6001P Bronze 50g 75164
LMC-6013P Blue 250g 75165
LMC-6013P Blue 50g 75166
LMC-6044P Black 250g 75168
LMC-6044P Black 50g 75172
LMC-6044P Black 12oz 75176
LMC-6062P Green 250g 75177
LMC-94 Imitation Etch/White 250g 75179
LMC-94 Imitation Etch/White 50g 75180
LMC-98 Bright White 250g 75181
LMC-98 Bright White 50g 75182
Metal Marking
LMM-14 Black for Metal 250g 75183
LMM-14 Black for Metal 50g 75184
LMM-14 Black for Metal 6oz. Aerosol 75186
LMM-6000 Black for Metal 250g 75187
LMM-6000 Black for Metal 50g 75188
LMM-6000 Black for Metal 500g 75189
LMM-6000 Black for Metal 12oz Aerosol 75190
Black Marking Tape 1 in x 50 ft roll 75191
Black Marking Tape 2 in x 50 ft roll 75192
LMM-6038 Black for Smooth & Polish Metals 250g 75194
LMM-6904 for Aluminum 50g 75195
43
Accesso
ries
Visit our website: www.troteclaser.com
44
Acc
esso
ries
Laser Rubber
Our innovative stamp rubbers convince with their excellent engraving and impression quality and can be engraved particularly quickly.
Laser Rubber AERO AERO
Size 8.27“ x 11.69“ (A4) 11.69“ x 16.53“ (A3)
Thickness 0.09“ 0.09“
ColourLight grey
850208Light grey
850208
Hardness 60° Shore 60° Shore
Reference number
34192 36877
AERO: Odourless laser rubber • Odourless during engraving • 25% faster than other odourless laser rubbers • Especially easy to clean • Solvent resistant
Laser rubber product range for various stamp applications.
45Visit our website: www.troteclaser.com
Accesso
ries
Acrylic Cleaning and Polishing
Accessories for finishing acrylic and other laserable plastics.
Contents Reference number
Novus 1 Acrylic Cleaner 8 oz 74159
Novus 2 Acrylic Polisher 8 oz 74160
Novus 3 Heavy Scratch Remover 8 oz 74162
Anti Static Cleaning Cloth Cloth 741161
Paint for Acrylic
Acrylic paints are optimal for colour filling engraved plastics to allow for multi coloured artwork. The colours are highly opa-que and durable. They are particularly well suited for colour-fil-ling the back of the engraved plates with an even distribution.
Colour Size Reference number
Paint for Acrylic
Black 1 oz 74163
Red 1 oz 74164
White 1 oz 74165
Blue 1 oz 74166
Bronze 1 oz 74167
Copper 1 oz 74168
Silver 1 oz 74169Bright Gold 1 oz 74170
Black 4 oz 74198Bright Gold 4 oz 74224
Pro Colour Fill Kit - 8 Colours Kit 74176Deluxe Pro Colour Fill Kit - 12 Colours Kit 74153
Stone Fill Gold 1 oz 74230Stone Fill Silver 1 oz 74232Stone Fill Black 1 oz 74233
Stone Colour Fill Kit - 5 Colours Kit 74158
46
Acc
esso
ries
Badge Findings
All badges engrave to gold. For colour, you can oxidize or colour fill after engraving.
Fasteners
128-211S
White Bar PinPlastic 1.5“ LongSelf-Adhesive
128-211P
White Bar PinPlastic 1.5“ LongNon-Adhesive
128-103S
Bar PinMetal, 1.5“ LongSelf-Adhesive
128-103P
Bar PinMetal, 1.5“ LongNon-Adhesive
128-612SG
Military Bar 2“Vinyl with ClutchSelf Adhesive
128-612PG
Military Bar 2“Vinyl with ClutchNon-Adhesive
128-611PG
Single Tack with Clutch
Clips
128-503P
Bull Dog Pressure ClipPlastic Base3/4“ x 3/4“
128-503S
Badge Clip, Metal3/4“ Square SwivelSelf-Adhesive
128-205H
Metal Clip with Clear Swivel Strap
Magnets
128-MO1
Steel Cover Magnet
128-MO2
Plastic Cover Magnet
128-MO3
Plastic Cover Magnet
128-MO4
Round Magnet
128-MO5
Triple Magnet Plastic Cover
47Visit our website: www.troteclaser.com
Accesso
ries
Finish Colour Clutch Pin Back Blank
Bright Gold 352-MBG38C 352-MBG38P 352-MBG38CB
Satin Gold 352-MSG38C 352-MSG38P 352-MSG38CB
Bright Silver 352-MBS38C 352-MBS38P 352-MBS38CB
Satin Silver 352-MSS38C 352-MSS38P 352-MSS38CB
Chrome Plated 352-MCP38C 352-MCP38CB
Metal Name Badges
Finish Colour Clutch Pin Back Blank
Bright Gold 352-MBG12C 352-MBG12P 352-MBG12CB
Satin Gold 352-MSG12C 352-MSG12P 352-MSG12CB
Bright Silver 352-MBS12C 352-MBS12P 352-MBS12CB
Satin Silver 352-MSS12C 352-MSS12P 352-MSS12CB
Chrome Plated 352-MCP12C 352-MCP12CB
Finish Colour Clutch Pin Back Blank
Bright Gold 352-MBG58C 352-MBG58P 352-MBG58CB
Satin Gold 352-MSG58C 352-MSG58P 352-MSG58CB
Bright Silver 352-MSB58C 352-MSB58P 352-MSB58CB
Satin Silver 352-MSS58C 352-MSS58P 352-MSS58CB
Chrome Plated 352-MCP58C 352-MCP58CB
Finish Colour Clutch Pin Back Blank
Bright Gold 352-MBG34C 352-MBG34P 352-MBG34CB
Satin Gold 352-MSG34C 352-MSG34P 352-MSG34CB
Bright Silver 352-MSB34C 352-MSB34P 352-MSB34CB
Satin Silver 352-MSS34C 352-MSS34P 352-MSS34CB
Chrome Plated 352-MCP34C 352-MCP34CB
Finish Colour Clutch Pin Back Blank
Bright Gold 352-MBG1C 352-MBG1P 352-MBG1CB
Satin Gold 352-MSG1C 352-MSG1P 352-MSG1CB
Bright Silver 352-MSB1C 352-MSB1P 352-MSB1CB
Satin Silver 352-MSS1C 352-MSS1P 352-MSS1CB
Chrome Plated 352-MCP1C 352-MCP1CB
3/8“ x 2 1/4“ Satin Gold
1/2“ x 2 3/8“ Bright Gold
5/8“ x 2 1/2“ Satin Silver
3/4“ x 3“ Bright Silver
1“ x 3“ Chrome Plated
Trotec Laser Canada makes custom name badge blanks. We are able to make virtually any shape and size, ranging from your basic rectangle bevelled tags, rounded corners or custom shapes.
Your Logo Here
Address Here
Your Customer Information Here
Engraving also available
Name Tag Blanks
48
Acc
esso
ries
Badge Accessories
Part Number Size Quantity Colour
440-76000 1/2“ 100/box Silver
440-76400 1“ 100/box Silver
440-76600 1 1/4“ 100/box Silver
440-77400 1“ 100/box Brass
Split Rings
Brass Ornamental Plates
Part Number Sizes Colour
75701 3/8 x 2 1/2 brass ornamental plate Satin Gold
75702 1/2 x 3 brass ornamental plate Satin Gold
75703 3/4 x 3 1/2 brass ornamental plate Satin Gold
75704 3/4 x 4 brass ornamental plate Satin Gold
Part Number Size Quantity Hole Size
440-26006 3/4“ 100/box 4 mm
440-26010 1“ 100/box 4 mm
440-26012 1 1/4“ 100/box 7 mm
440-26013 1 3/8“ 100/box 7 mm
440-26017 1 7/8“ 100/box 8 mm
Brass Tags w/ Hole
Part Number Size Quantity Colour
440-31700 No. 6 Ball Chain 100ft Spool Nickel Plated Steel
440-32100 No. 3 Ball Chain 100ft Spool Nickel Plated Steel
440-31900 No. 6 Connector Ball Chain 100/pkg Nickel Plated Steel
440-32900 Ball Chain End Couplings 100/pkg Nickel Plated Steel
440-32250 No. 3 Connector Ball Chain 100/pkg Aluminum
440-31400 No. 6-4 1/2“ Ball Chain (Pre-Cut) 100/pkg Nickel Plated Steel
Ball Chain
Part Number Size Quantity Colour
972-902-0S 1/2“ Tall 25/bag Silver
972-901-0G 1/2“ Tall 25/bag Brass
S Hooks
49Visit our website: www.troteclaser.com
Accesso
ries
Braille Rasters
Part Number Sizes
73672 Pure Adhesive Tape 0.5 inch x 18 yar
73673 Black Acrylic Rasters 10,000 UV Stab
73674 Clear Acrylic Rasters 10,000 UV Stab
73675 White Acrylic Rasters 10,000 UV Stab
73676 Stainless Steel Rasters 1000
73678 Stainless Steel Raster Spheres- 10000
Braille Accessories
Braille Cutters
Part Number Sizes
73686 Raster Braille Cutter 11/64"
73687 Raster Braille Cutter 1/4"
73685 Raster Braille Cutter for Acrylic 11/64"
73688 Raster Braille Cutter for Acrylic 1/4"
73665 Braille Drill Bit for Metals
73666 Raster Endmill for Stainless Steel
The Raster braille system is a patented process. A valid license is required for purchase on these items.
50
Acc
esso
ries
Tapes, Velcro & Adhesive
Sublimation Heat Tape
Part Number Description Sizes
058-CW-215-1272 High Temperature Tape for Sublimation 1/2“ x 60 yrds
Engraving Table Tape
Part Number Description Sizes
058-TWO-SIDED Two-Sided Table Tape 1/2“ x 72 yrds
058-TT7147-1966 Two-Sided Table Tape 3/4“ x 60 yrds
Adhesive Rolls and Sheets
Part Number Description Sizes
0583M-ADHESIVE 3M Adhesive 3M Adhesive #9502 24“ x 60 yrds
0583M-468MP 3M Adhesive 3M Adhesive #468MP 24“ x 60 yrds
0583M ADH SHEETS 3M Adhesive 3M Adhesive #9502 12“ x 24“
0583M ADHESIVE12 3M Adhesive 3M Adhesive #9502 12“ x 60 yd0583M-467MP 3M Adhesive 3M Adhesive #9141 12“ x 180 yd
058S234 Economy Adhesive Tape, S234 Double Coated 12“ x 60 yds
Magnetic Tape
Part Number Description Sizes
670-PSA-.5 Magnetic Tape w/ PSA 0.060“ x 100‘ x 0.5“
670-PSA-.75 Magnetic Tape w/ PSA 0.060“ x 100‘ x 0.75“
670-PSA-1 Magnetic Tape w/ PSA 0.060“ x 100‘ x 1“
623SUS 225 Magnetic Sheet w/ PSA 12“x24“ Self Adhesive
Velcro Rolls
Part Number Description Sizes
305-190911 Velcro Loop Black 3/4“ x 25 yrds
305-190940 Velcro Hook Black 3/4“ x 25 yrds
305-196256 Velcro Loop Black 1/2“ x 25 yrds
305-196802 Velcro Hoop Black 1/2“ x 25 yrds
305-190984 Velcro Loop Black 1“ x 25 yrds
305-191051 Velcro Hoop Black 1“ x 25 yrds
305-190899 Velcro Loop White 3/4“ x 25 yrds
305-190935 Velcro Hook White 3/4“ x 25 yrds
305-195472 Velcro Loop White 1/2“ x 25 yrds
305-195473 Velcro Hook White 1/2“ x 25 yrds
305-190959 Velcro Loop White 1“ x 25 yrds
305-191033 Velcro Hook White 1“ x 25 yrds
51Visit our website: www.troteclaser.com
Accesso
ries
Foam Tape
Part Number Thickness Sizes
058-CW3016-.5 1/16“ 1/2“ x 36 yrds
058-CW3016-.75 1/16“ 3/4“ x 36 yrds
058-CW3016-1 1/16“ 1“ x 36 yrds
058-CW3016-1.5 1/16“ 1 1/2“ x 36 yrds
058-CW3032-.38 1/32“ 3/8“ x 72 yrds
058-CW3032-.5 1/32“ 1/2“ x 72 yrds
058-CW3032-.75 1/32“ 3/4“ x 72 yrds
058-CW3032-1 1/32“ 1“ x 72 yrds
058-CW3032-2 1/32“ 2“ x 72 yrds
058-S400818-.75 1/8“ 3/4“ x 25 yrds
Double Sided Application Tape - Scapa
Part Number Sizes
0584403-.25 1/4“ x 36 yrds
0584403-.5 1/2“ x 36 yrds
0584403-.75 3/4“ x 36 yrds
0584403-1 1“ x 36 yrds
0584403-1.5 1 1/2“ x 36 yrds
0584403-2 2“ x 36 yrds
0584403-3 3“ x 36 yrds
0584403-4 4“ x 36 yrds
0584403-12 12“ x 36 yrds
Double Sided Application Tape - TESA
Masking
Part Number Sizes
058-GXP775-6 6“ x 72 yrds
058-GXP775-8 8“ x 72 yrds
058-GXP775-12 12“ x 72 yrds
Part Number Sizes
058TT4970-.38 9mm x 55m (3/8 in)
058TT4970-.5 12mm x 55m(1/2 in)
058TT4970-.75 19mm x 55m (3/4 in)
058TT4970-1 25mm x 55m (1 in)
058TT4970-1.5 38mm x 55m (1.5 in)
058TT4970-2 50mm x 55m (2 in)
058TT4970-3 75mm x 55m (3 in)
058TT4970-4 101.6mm x 55m (4 in)
Part Number Sizes
058A754288 Film, Blue PVC Surface 3mil x 12“ x 330
623SUS 188 LiquaMask - Half Gallon
623SUS 189 Liquid Mask - Quart
700LASERS EDGE 6“ x 25 yds Lasers ft Edge (red)
52
Acc
esso
ries
Tapes, Velcro & Adhesive
Not all colour & thickness combinations are stock items, please call for availability
Felt Pads
Oxidizer
Part Number Description Volumes
786-A384-8 A-384 Oxidizer for Aluminum 8 oz
786-A384-4 A-384 Oxidizer for Aluminum 4 oz
786-B/OX324-8 B/OX 324 Oxidizer for Brass 8 oz
786-B/OX324-4 B/OX 324 Oxidizer for Brass 4 oz
Part Number Description Sizes
972-928-00 1/2“ diameter 1,000/roll
Multi Mat
Part Number Description Sizes
G01-MULTI MAT Sold by the Square Foot Master Sheet - 24“ x 48“
Laser Foil
Part Number Description Sizes
700-FOIL BLUE Metalized Blue Foil 6“ x 25‘
700-FOIL BR GOLD Metalized Bright Gold Foil 6“ x 25‘
700-FOIL GREEN Metalized Bright Green Foil 6“ x 25‘
700-FOIL RED Metalized Red Foil 6“ x 25‘
700-FOIL SILVER Metalized Bright Silver Foil 6“ x 25‘
700-FOIL STN GOLD Brushed Gold Foil 6“ x 25‘
Cleaning Products
Part Number Description
TRP69248 LENS CLEANER
TRP69249 LENS TISSUE
875-20009 4oz Triflow Lubricant
53Visit our website: www.troteclaser.com
Accesso
ries
Cable Tags
Trotec Laser Canada stocks stainless steel cable tags in the most common sizes and configurations, all laser cut or die punched to ensure consistency from piece to piece and from order to order. They are ideal for use with the Cermark metal marking compounds, or for direct marking with Fiber lasers or rotary engravers. Custom sizes and hole configurations are available upon request.
Part Number Description
TAG1.5SS 1 1/2 in Dia. Tag w/ .250 in hole, #304
TAG1H343 3/4 x 3 Cable tag with 1/8 holes, #304 SS
TAG1H343.25H 3/4 x 3 Cable tag with 1/4 hole, #304 SS
TAG3/4X4 3/4 x 4 Cable tag with 4 slots, #304 SS
TAGCABLE .75X3SS 3/4 x 3 Cable tag with 4 slots, #304 SS
TAGCABLE 1X2SS2H 1 x 2 Cable tag w 2 holes (.125) #304 SS
TAGCABLE 1X3 1 x 3 Blank Cable tag SS - no holes
TAGCABLE 1X3SS 1 x 3 Cable tag with 4 slots, #304 SS
TAGCABLE 1X3SS1H 1 x 3 Cable tag w 1 hole (.250) #304 SS
TAGCABLE 1X3SS2H 1 x 3 Cable tag w 2 holes (.125) #304 SS
TAGCABLE 1X3SSUM 1 x 3 Cable tag with 4 slots, unmasked
TAGCABLE 1X4 1 x 4 Cable tag with 1 hole .250
TAGTG12-0003 2 in Dia. tag with 1 hole, #304 #4 SS
1 x 3 Cable tag w 2 holes (.125)
2 in Dia. tag with 1 hole1 x 3 Cable tag with 4 slots
3/4 x 3 Cable tag with 4 slots
3/4 x 3 Cable tag with 1/4 hole 1 x 2 Cable tag w 2 holes (.125)
3/4 x 3 Cable tag with 1/8 holes1 x 3 Cable tag with 1/4 holes
54
Acc
esso
ries
Trophy Shields & Pet Tags
Our trophy shields and pet tags are die punched for consistent size and quality, from the best engravea-ble materials for easy personalization.
1.5“ x 1.25“ 971-SH1-1022Bright Silver
Trophy Shields
1.5“ x 1.25“ 971-SH1-1021Bright Gold
1.5“ x 1.25“ 971-SH1-1029Satin Silver
1.5“ x 1.25“ 971-SH1-1028Satin Gold
1.5“ x 1.25“ 971-SH1-1033Black
1.5“ x 1.5“ 971-SH10-1021Bright Gold
1.5“ x 1.5“ 971-SH10-1033Black
1.5“ x 1.5“ 971-SH10-1022Bright Silver
1.5“ x 1.5“ 971-SH4-1033Black
1.5“ x 1.5“ 971-SH4-1022Bright Silver
1.5“ x 1.5“ 971-SH4-1021Bright Gold
Laserable Shields
1.5“ x 1.25“ 971-SH1-1429Matte Silver (will laser to black)
1.5“ x 1.25“ 971-SH1-1095Gloss Black (will laser to gold)
1.5“ x 1.25“ 971-SH1-1429Matte Gold (will laser to black)
1.5“ x 1.5“ 971-SH10-1095Gloss Black (will laser to gold)
2“ x 1.125“623-NUS 338
Pink
Anodized Military Dog Tags
2“ x 1.125“623-NUS 180
Yellow2“ x 1.125“
623-NUS 179
Green
2“ x 1.125“623-NUS 178
Red2“ x 1.125“
623-NUS 177
Blue
2“ x 1.125“623-NUS 169
Purple
2“ x 1.125“623-NUS 176
Black
55Visit our website: www.troteclaser.com
Accesso
ries
Anodized Aluminum Pet Tags
Gold PurpleRed PinkBlue1“ x 1“ 951-L 4A
Green
Green
Black
Red
Gold
Purple Blue
Silver Pink
GoldPurpleRed Pink BlueGreen
1 1/16“ x 1 9/16“ Bone Large - 951-L 1A3/4“ x 1 1/16“ Bone Small - 951-S 1A
1 1/32“ x 1 5/16“ Hydrant Large - 951-L 6A1“ x 7/8“ Hydrant Small - 951-S 6A
BlackBlue Green RedPurple1 5/16“ x 1 1/8“ Heart Large - 951-L 6A
3/4“ x 7/8“ Heart Small - 951-S 6A
RedPurple Blue BlackGreen
1 1/4“ Dia. 951-L 15A
PurpleSilver Green RedBlue7/8“ x 1 1/16“ 951-L 17A
Blue Gold RedGreen1 1/2“ x 1 1/16“ 951-L HOUSE
Stainless Steel Pet Tags
1 1/16“ x 1 7/16“ 0.032951-L 6 SS
Fire Hydrant
951-L 9 SS
Heart
1“ x 1 1/2“ 0.032951-L 1 SS
Dog Bone1 5/16“ Diameter
972-991-00
Ring Top
1 1/4“ Diameter951-L 15 SS
Circles
Silver
SilverGold
Purple
1 1/4“ x 1 1/8“
56
Acc
esso
ries
Engraving Cutters
11/64“ (.172“) Diameter 1/4“ (.25“) Diameter 1/8“ (.125“) Diameter
Cutter Available In
X=30°Y=45°
Half-Round Standard Cutters
Quarter Round Cutters
Profiler Cutters
Parallel
Traditional design. Recommended for flexible engraving stock, and has application in surface hardened materials such as cast iron.
Similar to the half round cutter, except that the heel half of the cutter is removed, providing the ultimate amount of clearance to facilitate chip removal
A cutter with a narrow profile effective for cutting out shapes. This type of tool is stronger than a parallel cutter that is sharpened less than its diameter and can be used when a slight bevel is acceptable
A parallel cutter will produce a cut with straight edges compared to the “V“ or angled cut from a standard tool.
350-1164C.***350-14C.*** 351-18DB.***
350-18QR.*** 350-18P.***
350-18C.***350-184C.***
Cutter-Beveler
Bevel Cutter
RouterMills® (EndMill) CuttersCuts out and bevels in one smooth operation. A cutter-beveler has a parallel cutting edge which profiles or cuts through the material, while the angle edge produces a 45 bevel for a depth of 1/3 to 1/2 of the material thickness. Available for 1/16“ and 1/8“ thick materials
Beveling is the process of creating a sloped edge on a plate, most often through the use of a 30° or 45° cutter and a beveling machine. A cutter with a 45° cutting angle is the most popular choice because it creates a more pronounced cut by exposing more of the core material.
These cutters have been designed using end mill and router bit technology to produce a tool that offers cleaner, faster cuts in a variety of materials at the high spindle speeds typically associated with engraving machines and routers.
350-18CTBV.***
RM-250-2FRM-250-3FRM-250-4F
350-184BVL
350-1164QR.***350-14QR.***
351-1164DB.***351-14DB.***
350-1164P.***350-14P.***
350-1164CTBV.***350-14CTBV.***
350-181BVL350-1164BVL
RM-171-2FRM-171-3FRM-171-4F
R2-250-2F2” long 6” long
Our engraving cutters are made from Premium Micrograin carbide for superior edge quality and tool life. They are available in sizes to fit any rotary engraving machine.
*** = TIP SIZE
57Visit our website: www.troteclaser.com
Diamond Drag Tool
Rotating Diamond Burnishers
Pen Burnisher
Deep Diamond Burnishers
Non-rotating tools with a diamond tip intended for scratch engraving on trophy brass and aluminum.
For glass engraving and burnishing. Particularly effective on coloured aluminum and brass.
The rotating pen engraver brings high quality to the difficult task of engraving coated pens and will engrave many pens that were previously deemed unengraveable.
For deeper engraving in metal, particularly stainless steel
351-18DMD.***351-1164MD.***351-14DMD.***
351-18DB.***351-1164DB.***351-14DB.***
351-1164PEN351-14PEN
351-1164DEEP.***351-14DEEP.***
*** = Angle
*** = Tip Size
Diamond Tools
Diamond is the hardest substance known and the most resistant to abrasion. The unique geometry of the diamond engraving tool, with its highly polished surface, provides the brilliantly reflective lines of top quality engraving. The point of the drag engraver and cutting edge of the diamond burnisher are sharpened to micro-precision tolerances that simply last and last.
Letter Height Recommended Stroke Widths
1/16 3/32
The chart below displays the most commonly used letter height/tip width combinations for single line fonts. When engraving single stroke characters, we recommend that the width of the cut be approxi-mately 12% of the letter height to achieve proportional letters. For example: engraving a 1/2” (0.5”) let-ter, the stroke should be 0.06” (0.5” x 12% = 0.06). Cutters and burnishers are available in any required tip size ranging from a point (0.000”) up to the full shank diameter. Maximum stroke width of 1/8” cutter is 0.125”; 11/64” cutter is 0.171”; 1/4” cutter is 0.25”.
1/8 3/16 1/4 3/8 1/16 1/2 5/8 1 1 3/8 2
0.005 0.010 0.015 0.020 0.030 0.045 0.060 0.075 0.090 0.125 0.171 0.250
Selecting the Appropriate Tip Width
Accesso
ries
58
Acc
esso
ries
Fabrication Equipment
Put a stop to sawing valuable materials into chips. Using this precision shear you can produce a sheet of engraved plates, and cut them down to final size ‘on the line’. No waste - easy operation - safe.
Heavy Duty 12” Table Shears
Part Number Description
2001UP-BLP Top blade (Plastic cutting)
2001UP-BLM Top blade (Metal cutting)
2001UP-BLL Bottom blade for either
Part# RULER Metal Replacement Ruler
Part# RLR Stick-On Ruler
Part Number Description
2001Re/12“ 12“ Table Shear for Metal
2001Re/12“ P 12“ Table Shear for Plastic
- Cut up to 1/8” plastic easily- Cuts aluminum 0.040” maximum, and trophy brass 0.025” maximum thickness- Ideal for cutting name plates, badges and strips- Clean cut, does not burr- Cuts up to 12” width x any length. Safety guard included- Three positions provided for the movement of the scale to allow a more efficient cut and longer blade life
- Steel scale recessed into the table to prevent material from sliding underneath- High quality Tool Steel blades- Plastic blade is acute ground, and metal cutting blade obtuse ground. Specify the material being cut in your shears when ordering. Either metal or plastic blade is supplied with the machine
Replacement Table Shear Blades & Parts
Shear Accessories
Tru-Square - When material is cut on a shear, it can creep or move from the cutting force of the shear. A Tru-Square helps prevent this. When installed, it forms a right angle with the ruler and is parallel to the blades. As the material is cut, the cutting force pushes it into the Tru-Square. The material can’t move, and creep is eliminated. The Tru-Square also serves as a front gauge and is an invaluable aide for making accurate, repetitive plaques (Note: With the new Step Ruler, only the Tru-Square Guide is required!)
59Visit our website: www.troteclaser.com
Accesso
ries
Corner Punch
The Maxi-Press is designed for versatile uses, including hole punching, notching, and rounding nameplates. It can produce notched corners, rounded corners, a centre hole punch, and a combination punch and notch. This tool produces burr-free results with each cut, adding beauty and style to nameplates. 095-MAXI 3/32
The Cornermate® Series is the new standard for cutting corners, holes and slots in plaques, badges, signs, and other items. There are over thirty inter-changeable cutting units from 1/8” to 1”. All units are precision engineered, and will produce flat, crisp shapes in photographic paper, laminations, mag-netics, flexible plastic, aluminum, brass, and many other material. Each cutting unit has the material guides machined into the body of the unit so the location of the cut is always the same. Insert the material, and squeeze the handle. It’s that simple and quick! CM40
Part Number Description
CM40 Cornermate ( dies sold separately )
CM40E Electric Cornermate ( dies sold separately)
Part Number Description
MAXI 3/32 Maxi-Press with 3/32“ Hole Punch
MAXIPRESS Maxi-Press with 1/8“ Hole Punch
60
Acc
esso
ries
Fabrication EquipmentCornermate Cutting Units
Type Sizes
Round 1/8“, 3/16“, 1/4“, 5/16“, 3/8“, 1/2“, 3/4“, 1“
Notch 1/8“, 3/16“, 1/4“, 3/8“, 1/2“, 3/4“, 1“
Scallop 1/4“, 3/8“, 1/2“
Chamfer 1/4“, 3/8“
Hole Punch 3/32“, 1/8“, 3/16“
Slot 1/8“ x 9/16“
Type Capacity
Aluminum 0.040“
Half Hard Brass 0.025“
Flexible Plastic 0.125“
Brass Plated Steel 0.015“
Cornermate Capacity
Disc Fabrication
Trotec Laser Canada fabricates 1”, 1 1/2”, and 2” discs in-house. We die punch stock aluminum, brass materials up to 0.025” thick, and brass coated steel up to 0.018” thick.
Custom order additional sizes. Contact us for a quote. Minimum order and lead time required.
Discs available in rotary, laserable and sublimatable stock.
2” 1.5” 1”
61Visit our website: www.troteclaser.com
Accesso
ries
Bevelers
Material Beveler
A simple operation that provides smooth, beveled edges for your finished signs. Interface with virtually any shop vac with a 1 1/4” vacuum hose to help keep work area chip-free. Durable steel 3” x 12” material table. 117 volt, 60 Hz motor. Includes: 1 solid carbide 45 degree edge beveler cutter; 2 hex wrenches, 3/32” and 5/32”; slide; operating instructions. Shipping weight, 9lbs. SM98A
Large Material Beveler
The same as for simple operation SM98A. A large steel table 8” x 22” for greater stability and speed. 117 volts or 230 volts, 60 Hz motor includes a carbide cutter chamfering edges with 45 degree, 2 hex wrenches 3/32”, 5/32”, a slide; operating instructions. The package for delivery weighs 12 lbs. SM99A
Quality One Beveler
This machine cuts an edge angle, gives a beautiful finish to your material. It is designed for continuous operation on all materials up to 1/4” thick. The table measures 4” x 16 1/2”. Q1BEV
Heat Benders
Strip Heaters for Acrylic Sheet Bending
This heavy duty stripheater is designed to place a narrow strip of heat on an acrylic plastic sheet until it is soft and pliable enough to bend to the desired form. It is capable of heating sheets up to 1/2” thick.
- Thermostat controlled low/high setting - On/Off switch - Pilot light
EMX-2
Watts: 625
Volts: 115AC
Length: 48“
Width: 7“
- Cord winding bracket - Very sturdy sheet metal construction and baked enamel paint.
EMX-2
62
Acc
esso
ries
JRS Sign Frames
JRS Sign Frames and Holders are made from high quality components in the USA. They perfectly accent your engraved plastic nameplates, and add a finished look to directional and tactile signage. Custom frames can be made to your specifications, call for a quotation on your design.
Part No. Insert Size A Insert Size B
85 3/4“ 1/16“
25 1“ 1/16“
54 1-1/4“ 1/16“
70 1-1/2“ 1/16“
19 1-1/2“ 1/8“
14 1-5/8“ 1/16“
48 2“ 1/16“11 2“ 1/8“16 3-1/4“ 1/8“
A
B
Part No. Insert Size A Insert Size B
85 3/4“ 1/16“
25 1“ 1/16“
Part No. Insert Size A Insert Size B
85 3/4“ 1/16“
25 1“ 1/16“
Part No. Insert Size A Insert Size B
59 2“ 1/16“A
B
A
B
A
B
Desk Holders
Available Lengths: 4” / 6” / 8” / 10” / 12”
Available Lengths: 8” / 10”
Available Lengths: 8” / 9” / 10” Available Lengths: 8” / 9” / 10”
Available Finishes: Bright Rose Gold, Bright Silver, Satin Silver, Black, Bright Yellow Gold
63Visit our website: www.troteclaser.com
Counter & Desk Bases
Part No.
Insert Size A
Insert Size B
Max. Sign Height
15 3/4“ 1/16“ 2“
50 15/16“ 1/16“ 3“
97 1-7/16“ 1/16“ 7“
17 1-3/32“ 1/8“ 4“55 2-1/2“ 1/8“ 8“
Available Lengths: 6” / 8” / 10” / 12”
Part No.
Insert Size A
Insert Size B
Max. Sign Height
40 1-1/4“ 1/16“ 2“
Available Lengths: 3-3/4” / 8” / 10” / 12”
Part No.
Insert Size A
Insert Size B
Max. Sign Height
35 1-1/4“ 1/16“ 6“
42 1-1/4“ 1/8“ 6“
22 2-1/2“ 1/16“ 12“
39 1-1/4“ 3/32 6“
Available Lengths: 3/3-4” / 8” / 10” / 12”
Part No.
Insert Size A
Insert Size B
Max. Sign Height
P100 2“ 1/16“ 6“
Available Lengths: 8” / 10”
Wall & Corridor Brackets
A
B
Part No. Insert Size A Insert Size B
86 1/2" 1/16"
100 5/8" 1/16"
44 3/4" 1/16"
28 1" 1/16"
47 1-1/4" 1/16"
29 1-1/2" 1/16"
95 1-1/2" 1/8"46 1-5/8" 1/16"87 1-3/4" 1/16"88 1-3/4" 1/8"36 2" 1/16"94 2" 1/8"89 2-1/2“ 1/16"90 2-1/2" 1/8"37 3" 1/16"52 3" 1/8"49 4" 1/16"51 4" 1/8"
Available Lengths: 4” / 6” / 8” / 10” / 12” / 35”
Part No.
Insert Size A
Insert Size B
56 1" 1/16"
57 1-1/2" 1/16"
58 2" 1/16"
Accesso
ries
Available Lengths: 4” / 6” / 8” / 9” 10” / 12” / 35”
Part No. Insert Size A Insert Size B
38 2-1/2“ 1/8“
Available Lengths: 2” / 3” / 4” / 5” 10” / 12” / 36”
64
Acc
esso
ries
Part No.Insert Size A
Insert Size B
Insert Size C
23 2“ 1-1/2“ 1/16“
Desk Holders
Available Lengths: 9” / 10” / 12” Available Lengths: 6” / 8” / 10”
B
c
A
B
c
A B
A
BcAvailable Lengths: 8” / 10” Available Lengths: 6” / 8” / 10”
Part No.Insert Size A
Insert Size B
Insert Size C
61 1“ 1-1/4“ 1/16“
Part No.Insert Size A
Insert Size B
Insert Size C
60 2“ 1-1/2“ 1/16“
Part No.Insert Size A
Insert Size B
Insert Size C
71 1-1/4“ 1-1/4“ 1/16“
33 2“ 2“ 1/16“
Desk Holders
Part No.Insert Size A
Insert Size B
Insert Size C
Insert Size D
112 1-1/2" 1-1/2" 1-1/2" 1/16"
106 1" 1" 1" 1/16"
109 3/4" 3/4" 3/4" 1/16"
Available Lengths: 6” / 8” / 10” / 36”
Part No.Insert Size A
Insert Size B
Insert Size D
115 2" 1" 1/16"
107 1-1/2" 1" 1/16"
108 1-1/4" 3/4" 1/16"
Available Lengths: 6” / 8” / 10” / 36”
Part No.Insert Size A
Insert Size D
103 1-1/2" 1/16"
114 3/4" 1/16"
Available Lengths: 6” / 8” / 10” / 36”
Part No.Insert Size A
75 1/16"
83 1/16"
Available Lengths: 6” / 8” / 10” / 36”
Part No.Insert Size A
76 1/16"
84 1/8"
Available Lengths: 36”
Part No.Insert Size A
27 1/16"
Available Lengths: 36”
Part No.Insert Size A
78 1/16"
Available Lengths: 36”
Part No.Insert Size A
77 1/16"
Available Lengths: 36”
65Visit our website: www.troteclaser.com
Architectural Aluminum Frames
Part No. Insert Size Style
341-66 1/16" 3/8" Radius Corner
641-66 1/8" 3/8" Radius Corner
241-66 1/16" Square Corners
541-66 1/8" Square Corners
Available Lengths: 6” x 6” frame containing 1” x 6” extrusion for a 1/16” message plate and a second 1/16” slot for a 1” x 3” Slider plate to uncover alternating messages.
Accesso
ries
Part No. Insert Size Style
341-88 1/16" 3/8" Radius Corner
641-88 1/8" 3/8" Radius Corner
241-88 1/16" Square Corners
541-88 1/8" Square Corners
Available Lengths: 8” x 8” frame containing 1” x 6” extrusion for a 1/16” message plate and a second 1/16” slot for a 1” x 3” Slider plate to uncover alternating messages.
Part No. Insert Size Style
344-23 1/16" 3/8" Radius Corner
644-23 1/8" 3/8" Radius Corner
244-23 1/16" Square Corners
544-23 1/8" Square Corners
Available Lengths: 2” x 13” slider frame is designed for 2” x 10” message plate to slide left or right to expose message at opposite end.
66
Flat Bed LasersSpeedy family and SP series
Lase
r D
evic
es
Process a virtually unlimited range of materials: With Trotec laser engraving devices, stamps can be produced within minutes and series production is also significantly streamlined.Customize honourary prizes, such as trophies or football trophies in the blink of an eye.
Endless Possibilities
The CO2 laser devices from the Speedy family are ideal for engraving and cutting a variety of materials, such as laminates, stamp rubbers, acrylic, wood, paper, card-board and many more. Fiber lasers are ideal for laser marking of metals and plastics. Both laser sources are integrated into the devices of the Speedy flexx
Trotec is a world leader in the field of laser technology and sets new standards. The Upper Austrian innovation leader offers solutions for almost any requirement of the laser marking, engraving and cutting technology sector. Its laser devices stand for quality, reliability and innovation. We manufacture flat bed laser devices, galvo laser systems and exhaust systems.
About Us
series; maximum flexibility for each application is thus guaranteed. Process virtually any material with a processing area of up to 1000 x 610 . The SP series with a processing area of 1500 x 1250 is great for precision processing large materials at high speeds.
Or score highly with clear acrylic cuts: Exceptional shapes for displays, signs and neon signs create more interesting and sophisticated end products. From simple rectangular advertising signs to complex contours and labels, anything is possible with Trotec lasers.
67
ProMarker and SpeedMarker seriesGalvo Lasers
Laser Devices
Whether you are producing and finishing of high-quality advertising materials or marking of identification plates or components in large quantities - metals and plastics can be optimally marked with high performance galvo lasers from the ProMarker or SpeedMarker series.
Demanding marking tasks
The ProMarker series offers simple high speed laser processing of metal and plastic parts, such as promotional items, gifts, identification plates and much more. Choose between the ProMarker 100, an open Class 4 laser marking station with precision Z-axis or the compact ProMarker 300, a table marking station, which is characterized by its ergonomics and safety (laser safety class 2). The SpeedMarker series, developed for efficient
About UsAll of our products are manufactured in Austria. At Trotec, you will also find an extensive selection of engraveable materials for laser and mechanical engraving as well as signage and marking accessories. You will receive only the highest quality materials with simple processing properties. Trotec has more than 300 employees and serves customers in over 90 countries. For more information, please visit www.troteclaser.com.
laser marking of metals and plastics along the entire industrial production chain, offers the perfect combination of intelligent software and high-quality engineering. The laser systems are available in 4 different sizes and in different configurations, to optimally meet your requirements: SpeedMarker 100, SpeedMarker 300, SpeedMarker 700, SpeedMarker 1300.
68
Air Filter Supplies
Air
Filt
ers
Model SPH - 426
Filtter Replacement : 514-F069-071 - Multi Layered Pad - (12 per pack)514-F071 - Disposable Filter Bag - (6 per pack)514-AG097 - Chemical Filter for SPH426514-AB010 - Motor Brushes & Discharge Pad514-F074 - HEPA Filter(Replacement of each filter will vary depending on materials being used.)
Model CSA - 626
Filter Replacement : 514-F069-071 - Multi Layered Pad - (12 per pack)514-F071 - Disposable Filter Bag - (6 per pack)514-AG097 - Chemical Filter Replacement514-AB010 - Motor Brushes & Discharge Pad514-AG128 - Pre-Filger Bag - (5 per pack)514-F074 - HEPA Filter(Replacement of each filter will vary depending on materials being used.)
Model SPH - 835
Filtter Replacement : 514-F069-071 - Multi Layered Pad - (12 per pack)514-F071 - Disposable Filter Bag - (6 per pack)514-AG097 - Chemical Filter for SPH426514-AB010 - Motor Brushes & Discharge Pad514-F074 - HEPA Filter(Replacement of each filter will vary depending on materials being used.)
Air Technologies Inc.QUATRO
Services
69Visit our website: www.troteclaser.com
Services and Cut-to-Size
Rounded corners with a radius of 1/8”, 1/4”, 3/16”, or 1/2” in metal. Any radius in plastic.
Self-adhesive film Application of a double-sided adhe-sive film to the back of the material plates.
Bevelling Beveled edges with an angle of 45° (rounded corners at an additional charge).
Holes of any diameter. Please order with a sketch, detailing the position of the hole above the center point.
Longitudinal and trans-verse brush strokes The orientation of the brush strokes can be selected at the time of cutting.
Do you want to save time? Then order your Trotec materials individually precut to size. Dimensionally accurate, fast and cost-effective. We reliably meet your requirements, so that you can concentrate on what really matters.
On request we can deliver your blanks on a base film, aligned along defined grid lines. As a result you do not have to insert and position your blanks individually and can engrave multiple plates in a single step. This saves valuable time spent handling materials. Pricing on request.
Engraving Use Ply Handling Finishing
Material Lase
r
Ro
tary
En
gra
ver
Exte
rio
r
Inte
rio
r
1 2 3 Fro
nt
Rev
erse
en
gra
vin
g
(op
tio
nal
co
lou
r fi
ll)
Sco
res
Saw
Dri
lls
Shea
r
Lase
r C
utt
ing
Bev
els
Hea
t B
end
Scre
en
pri
nti
ng
Bo
nd
ing
AD
A C
om
plia
nt
Ho
t St
amp
ing
Material
TroLase x x x x x x x x x x x x x x x x x TroLase
TroLase Metallic Plus x x x x x x x x x x x x x x x x TroLase Metallic Plus
TroLase Metallic x x x x x x x x x x x x x x x TroLase Metallic
TroLase Reverse x x x x x x x x x x x x x x x TroLase Reverse
TroGlas x x x x x x x x x x x x x x TroGlas
Acrylic Sheets x x x x x x x x x x x x x x x Acrylic Sheets
TroLase ADA Signage x x x x x x x x x x x x x x x x x TroLase ADA Signage
TroLase Thins x x x x x x x x x x x x x x TroLase Thins
TroLase Textures x x x x x x x x x x x x x x x TroLase Textures
TroLase Lights x x x x x x x x x x TroLase Lights
LaserFlex x x x x x LaserFlex
TroPly x x x x x x x x x x x x x x TroPly
TroPly Metallic Plus x x x x x x x x x x x x x TroPly Metallic Plus
TroPly Metallic x x x x x x x x x x x x x TroPly Metallic
TroPly Satin x x x x x x x x x x x x x x TroPly Satin
TroPly Ultra x x x x x x x x x x x x x x x TroPly Ultra
TroPly Ultra Reverse x x x x x x x x x x x x x x x TroPly Ultra Reverse
TroPly HiGloss x x x x x x x x x x x x x x x TroPly HiGloss
TroPly HiGloss Reverse x x x x x x x x x x x x x x TroPly HiGloss Reverse
Anodized Aluminum x x x x x x x x x x x x Anodized Aluminum
DuraBlack x x x x x x x x x DuraBlack
Alumamark x x x x x x x x Alumamark
Aluminum S x x x S x x x x x Aluminum
Brass S x x x S x x x x x Brass
Steel and Nickel x x x x S x x x x x Steel and Nickel
Sublimation Aluminum S x x x S x x x x x Sublimation Aluminum
70
Serv
ices
Ro
tary
Mat
eria
lsM
etal
sLa
sera
ble
Mat
eria
ls
S - Some materials are in our product line. Please consult descriptions in the catalogue.
71Visit our website: www.troteclaser.com
ServicesEngraving Use Ply Handling Finishing
Material Lase
r
Ro
tary
En
gra
ver
Exte
rio
r
Inte
rio
r
1 2 3 Fro
nt
Rev
erse
en
gra
vin
g
(op
tio
nal
co
lou
r fi
ll)
Sco
res
Saw
Dri
lls
Shea
r
Lase
r C
utt
ing
Bev
els
Hea
t B
end
Scre
en
pri
nti
ng
Bo
nd
ing
AD
A C
om
plia
nt
Ho
t St
amp
ing
Material
TroLase x x x x x x x x x x x x x x x x x TroLase
TroLase Metallic Plus x x x x x x x x x x x x x x x x TroLase Metallic Plus
TroLase Metallic x x x x x x x x x x x x x x x TroLase Metallic
TroLase Reverse x x x x x x x x x x x x x x x TroLase Reverse
TroGlas x x x x x x x x x x x x x x TroGlas
Acrylic Sheets x x x x x x x x x x x x x x x Acrylic Sheets
TroLase ADA Signage x x x x x x x x x x x x x x x x x TroLase ADA Signage
TroLase Thins x x x x x x x x x x x x x x TroLase Thins
TroLase Textures x x x x x x x x x x x x x x x TroLase Textures
TroLase Lights x x x x x x x x x x TroLase Lights
LaserFlex x x x x x LaserFlex
TroPly x x x x x x x x x x x x x x TroPly
TroPly Metallic Plus x x x x x x x x x x x x x TroPly Metallic Plus
TroPly Metallic x x x x x x x x x x x x x TroPly Metallic
TroPly Satin x x x x x x x x x x x x x x TroPly Satin
TroPly Ultra x x x x x x x x x x x x x x x TroPly Ultra
TroPly Ultra Reverse x x x x x x x x x x x x x x x TroPly Ultra Reverse
TroPly HiGloss x x x x x x x x x x x x x x x TroPly HiGloss
TroPly HiGloss Reverse x x x x x x x x x x x x x x TroPly HiGloss Reverse
Anodized Aluminum x x x x x x x x x x x x Anodized Aluminum
DuraBlack x x x x x x x x x DuraBlack
Alumamark x x x x x x x x Alumamark
Aluminum S x x x S x x x x x Aluminum
Brass S x x x S x x x x x Brass
Steel and Nickel x x x x S x x x x x Steel and Nickel
Sublimation Aluminum S x x x S x x x x x Sublimation Aluminum
Ro
tary
Mat
eria
lsM
etal
sLa
sera
ble
Mat
eria
ls
Sho
wro
om
s & Train
ing
Showrooms & Training Facilities
We are proud to be able to train and service our customers across Canada. With four locations in Toronto, Montreal, Calgary and Vancouver, as well as numerous road shows in smaller cities, Trotec offers seminars and workshops nearly every month to clients and prospects. From laser applications to materials and software, find out more from a locationnear you.
Visit our website: www.troteclaser.com
Unit 5 - 1705 Argentia Road Mississauga, ON L5N 3A9
8096 Trans Canada Highway Saint-Laurent, QC H4S 1M5
Suite 2 - 820, 28th Street N.E. Calgary, AB T2A 6K1
Suite 705-20381, 62nd Ave. Langley, BC V3A 5E6
Call 1-800-663-1149 All locations are full-service with on-site technicians
/TrotecLaserCanada /TrotecLaserCanada