MANAJEMEN LABMaterial Safety Data Sheet(MSDS)

AYA SOFIA4311413083KIMIA/002

UNIVERSITAS NEGERI SEMARANG2014

Material Safety Data SheetDithizone MSDSProduct Name: DithizoneSynonym: DiphenylthiocarbazoneChemical Formula: C13H12N4SHazards IdentificationHazardous in case of eye contact (irritant), of ingestion. Slightly hazardous in case of skin contact (irritant), of inhalation.

CARCINOGENIC EFFECTS: Not available.MUTAGENIC EFFECTS: Not available.TERATOGENIC EFFECTS: Not available.DEVELOPMENTAL TOXICITY: The substance is toxic to kidneys, mucous membranes. Repeated or prolonged exposure to the substance can produce target organs damage.First Aid MeasuresEye Contact: Check for and remove any contact lenses. Do not use an eye ointment. Seek medical attention.Skin Contact: After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing.Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.Ingestion: Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.

Fire and Explosion DataFlammability of the Product: May be combustible at high temperature.Explosion Hazards in Presence of Various Substances:Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product inpresence of static discharge: Not available.Fire Fighting Media and Instructions:SMALL FIRE: Use DRY chemical powder.LARGE FIRE: Use water spray, fog or foam. Do not use water jet.

Accidental Release MeasuresSmall Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finishcleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.

Handling and StoragePrecautions:Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not breathe dust. Avoid contact with eyes Wear suitable protective clothing If you feel unwell, seek medical attention and show the label when possible.Storage:Keep container dry. Keep in a cool place. Ground all equipment containing material. Keep container tightly closed. Keep in a cool, well-ventilated place. Combustible materials should be stored away from extreme heat and away from strong oxidizing agents.

Exposure Controls/Personal ProtectionEngineering Controls:Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.

Personal Protection:Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.

Physical ,Chemical Properties, Stability and Reactivity DataPhysical state and appearance : Solid. (Solid crystalline powder.)Odor : Not available.Taste : Not available.Molecular Weight : 256.32 g/moleColor : Blue. (Dark.)pH (1% soln/water) : Not applicable.Boiling Point : Not available.Melting Point : Decomposes. (168C or 334.4F)Critical Temperature : Not available.Specific Gravity : Not available.Vapor Pressure : Not applicable.Vapor Density : Not available.Volatility : Not available.Odor Threshold : Not available.Water/Oil Dist. Coeff. : Not available.Ionicity (in Water) : Not available.Dispersion Properties : See solubility in water, methanol.Solubility : Soluble in methanol. Insoluble in cold water.Stability : The product is stable.Instability Temperature : Not available.Conditions of Instability : Not available.Corrosivity : Non-corrosive in presence of glass.Special Remarks on Reactivity : Not available.Special Remarks on Corrosivity: Not available.Polymerization : No.

Toxicological InformationRoutes of Entry : Eye contact. Ingestion.Toxicity to Animals : Not available.Chronic Effects on Humans : The substance is toxic to kidneys, mucous membranes.Toxic Effects on Humans : Hazardous in case of ingestion. Slightly hazardous in case of skin contact (irritant), of inhalation.Ecotoxicity : Not available.Toxicity of the Products : The products of degradation are more toxic.of Biodegradation

Protective Equipment:Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Splash goggles.

Material Safety Data SheetMethyl red MSDS

Product Name: Methyl red

Synonym: C.I. Acid Red 2; BenzoicAcid, 2-((4-dimethylamino)phenyl)azo)-; 2-Carboxy-4'-(dimethylamino)azobenzene; 4'-Dimethylaminoazobenzene-2-carboxylic acid; C.I. 13020;C.I. Red 2; o-((p-(Dimethylamino)phenyl)azo)benzoic acid;p-(Dimethylamino)phenyl)azo)benzoic acid; Methyl Red,Neutral

Chemical Name: 2-((4-(Dimethylamino)phenyl)azo)benzoic acid

Chemical Formula: C15-H15-N3-O2

Hazards Identification

Potential Acute Health Effects:Hazardous in case of ingestion. Slightly hazardous in case ofskin contact (irritant), of eye contact (irritant), of inhalation.

Potential Chronic Health Effects:CARCINOGENIC EFFECTS: 3 (Not classifiable for human.) by IARC. MUTAGENIC EFFECTS: Mutagenic for bacteria and/or yeast. TERATOGENIC EFFECTS: Not available. DEVELOPMENTAL TOXICITY: Not available. The substance may be toxic to liver. Repeated or prolonged exposure to the substance can produce target organs damage.

First Aid MeasuresEye Contact:Check for and remove any contact lenses. In case of contact, immediately flusheyes with plenty of water for at least 15 minutes. Get medical attention if irritationoccurs.Skin Contact: Wash with soap and water. Cover the irritated skin with an emollient. Getmedical attention if irritation develops.

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. Ifbreathing is difficult, give oxygen. Get medical attention.Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt or waistband.

Fire and Explosion DataFlammability of the Product: May be combustible at high temperature.Explosion Hazards in Presence of Various Substances:Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product inFire Fighting Media and Instructions:SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet.Special Remarks on Fire Hazards: As with most organic solids, fire is possible at elevated temperatures or by contact with an ignition source.

Accidental Release Measures

Small Spill:Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.Large Spill:Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.

Handling and StoragePrecautions:Keep locked up.. Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not breathe dust. Wear suitable protective clothing. If you feel unwell, seek medical attention and show the label when possible. Keep away from incompatibles such as oxidizing agents, reducing agents.

Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.

Exposure Controls/Personal Protection

Engineering Controls:Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.

Personal Protection: Safety glasses. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.

Physical , Chemical Properties ,Stability and Reactivity Data

Physical state and appearance: Solid. (Crystals solid or Powdered solid.)Odor : Odorless.Taste : Not available.Molecular Weight : 269.3 g/moleColor : Violet or Red. Bluish-purple.pH (1% soln/water) : Not applicable.Boiling Point : Not available.Melting Point : 179C (354.2F) - 182 CCritical Temperature : Not available.Specific Gravity : Not available.Vapor Pressure : Not applicable.Vapor Density : 9.3(Air = 1)Volatility : Not available.Odor Threshold : Not available.Water/Oil Dist. Coeff .: Not available.Ionicity (in Water) : Not available.Dispersion Properties : Not available.Solubility : Insoluble in cold water, hot water. Soluble in very hot acetone, benzene, chloroform, acetic acid, alcohol, lipids. Slightly solublein petroleum ether.Stability : The product is stable.Instability Temperature : Not available.Conditions of Instability : Excess heat, incompatible materialsIncompatibility with various substances: Reactive with oxidizing agents, reducing agents.Corrosivity : Non-corrosive in presence of glass.Special Remarks on Reactivity: Not available.Special Remarks on Corrosivity: Not available.Polymerization: Will not occur.

Toxicological Information

Routes of Entry: Inhalation. Ingestion.Toxicity to Animals: Not available.Chronic Effects on Humans: Mutagenic for bacteria and/or yeast. May cause damage to the following organs: liver.

Toxic Effects on Humans: Hazardous in case of ingestion. Slightly hazardous in case of skin contact (irritant), of inhalation.Special Remarks on Chronic Effects on Humans:May affect genetic material (mutagenic). May cause cancer based on animal test data. No adequate data found for humans..Ecotoxicity: Not available.

Material Safety Data SheetCurcumin MSDS

Product Name: CurcuminCatalog Codes: SLC5503Synonym: Brilliant Yellow S; 1,7-Bis(4-hydroxy-3-methoxyphenyl)1,6-heptadiene-3,5-dione; Tumeric YellowChemical Formula: C21H20O6

Hazards IdentificationPotential Acute Health Effects:Hazardous in case of eye contact (irritant), of ingestion. Slightly hazardous in case of skin contact (irritant), of inhalation.

Potential Chronic Health Effects:MUTAGENIC EFFECTS: Mutagenic for mammalian somatic cells.

First Aid MeasuresEye Contact:Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.Skin Contact: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops.Inhalation:If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.Ingestion:Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention if symptoms appear.

Fire and Explosion DataFlammability of the Product: May be combustible at high temperature.Fire Hazards in Presence of Various Substances:Slightly flammable to flammable in presence of open flames and sparks, of heat. Non-flammable in presence of shocks.Explosion Hazards in Presence of Various Substances:Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in presence of static discharge: Not available.Fire Fighting Media and Instructions:SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet.

Accidental Release MeasuresSmall Spill:Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.Large Spill:Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.

Handling and StoragePrecautions:Keep locked up.. Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust. Avoid contact with eyes. Wear suitable protective clothing. If ingested, seek medical advice immediately and show the container or the label. Keep away from incompatibles such as oxidizing agents.

Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area. Do not store above 24C (75.2F).

Exposure Controls/Personal ProtectionEngineering Controls:Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.Personal Protection:Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.

Physical , Chemical Properties ,Stability and Reactivity Data

Physical state and appearance: Solid.Odor: Not available.Taste: Not available.Molecular Weight: 368.39 g/moleColor: Orange. Orange-YellowpH (1% soln/water): Not applicable.Boiling Point: Not available.Melting Point: 183C (361.4F)Critical Temperature: Not available.Specific Gravity: 2000 mg/kg [Mouse].Chronic Effects on Humans: MUTAGENIC EFFECTS: Mutagenic for mammalian somatic cells.Other Toxic Effects on Humans:Hazardous in case of ingestion. Slightly hazardous in case of skin contact (irritant), of inhalation.Special Remarks on Chronic Effects on Humans:May affect genetic material (mutagenic). It produced sister chromatid exchange in bone marrow of mice at 25 mg/kg, induced micronuclei at 73,600 mcg/L in a human embryo, and DNA inhibition in human HeLa cell [RTECS

Special Remarks on other Toxic Effects on Humans:Acute Potential Health Effects: Skin: May cause skin irritation. No adverse effects expected. No information found on absorption through skin. Eyes: Dust may cause eye irritation. No adverse effects expected. Inhalation: Dust may cause respiratory tract irritation. No adverse effects expected. No information found on absorption through lungs. Ingestion:Ingestion of small amounts during normal industrial handling is not likely to be harmful. Ingestion of large doses may cause gastrointestinal tract irritation (upset). It is poorly absorbed from the gut. Chronic Potential Health Effects: no information found other than it lowered serum and liver cholesterol levels in rats and that it may affect genetic material. The toxicological properties of this substance have not been fully investigated.

Ecotoxicity: Not available.Products of Biodegradation:Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.Toxicity of the Products of Biodegradation: The product itself and its products of degradation are not toxic.

Material Safety Data SheetEugenol MSDS

Product Name: EugenolSynonym: Hydroxy-1-methoxy-2-allyl-4-benzeneChemical Formula: C10H12O2

Hazards IdentificationPotential Acute Health Effects:Hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation. Slightly hazardous in case of skin contact (permeator).Potential Chronic Health Effects:Hazardous in case of skin contact (irritant), of ingestion, of inhalation. CARCINOGENIC EFFECTS: Not available.TOXICITY: Not available. The substance is toxic to lungs, the nervous system, mucous membranes. Repeated or prolonged exposure to the substance can produce target organs damage.

First Aid MeasuresEye Contact: Check for and remove any contact lenses. Do not use an eye ointment. Seek medical attention.Skin Contact:After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing.Serious Skin Contact:Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek immediate medical attention.Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.Ingestion:Do not induce vomiting. Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the toxic material was ingested; the absence of such signs, however, is not conclusive. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.

Fire and Explosion DataFlammability of the Product: May be combustible at high temperature.Flash Points: OPEN CUP: 104C (219.2F).Explosion Hazards in Presence of Various Substances:Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in presence of static discharge: Not available.Fire Fighting Media and Instructions:SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet.

Accidental Release MeasuresSmall Spill: Absorb with an inert material and put the spilled material in an appropriate waste disposal.Large Spill:Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.

Handling and StoragePrecautions:Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe gas/fumes/ vapour/spray. Wear suitable protective clothing In case of insufficient ventilation, wear suitable respiratory equipment If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes

Storage:Keep container dry. Keep in a cool place. Ground all equipment containing material. Keep container tightly closed. Keep in a cool, well-ventilated place. Combustible materials should be stored away from extreme heat and away from strong oxidizing agents.

Exposure Controls/Personal ProtectionEngineering Controls:Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location.Personal Protection:Splash goggles. Lab coat. Vapor respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.Personal Protection in Case of a Large Spill:Splash goggles. Full suit. Vapor respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.

Physical and Chemical PropertiesPhysical state and appearance: Liquid.Odor: Not available.Taste: Not available.Molecular Weight: 164.2 g/moleColor: Colorless.pH (1% soln/water): Not applicable.Boiling Point: 253.2C (487.8F)Melting Point: -7.5C (18.5F)Critical Temperature: Not available.Specific Gravity: 1.055 (Water = 1)Vapor Pressure: 0.03 mm of Hg (@ 20C)Vapor Density: Not available.Volatility: Not available.Odor Threshold: Not available.Water/Oil Dist. Coeff: Not available.Ionicity (in Water): Not available.Dispersion Properties: Not available.Solubility: Insoluble in cold water.

Stability and Reactivity DataStability: The product is stable.Instability Temperature: Not available.Conditions of Instability: Not available.Incompatibility with various substances: Not available.Corrosivity: Non-corrosive in presence of glass.Special Remarks on Reactivity: Not available.Special Remarks on Corrosivity: Not available.Polymerization: No.Toxicological InformationRoutes of Entry: Eye contact. Inhalation. Ingestion.Toxicity to Animals: Acute oral toxicity (LD50): 1930 mg/kg [Rat].Chronic Effects on Humans: The substance is toxic to lungs, the nervous system, mucous membranes.Other Toxic Effects on Humans:Hazardous in case of skin contact (irritant), of ingestion, of inhalation. Slightly hazardous in case of skin contact (permeator).Ecotoxicity: Not available.Products of Biodegradation:Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.Toxicity of the Products of Biodegradation: The products of degradation are less toxic than the product itself.Special Remarks on the Products of Biodegradation: May decompose on exposure to moist air and water.

Material Safety Data SheetFerric Ammonium Sulfate, Saturated,Aq.Sol. MSDS

Product Name: Ferric Ammonium Sulfate,Saturated,Aq.Sol.

Chemical Name: Ferric Ammonium Sulfate, Saturated,Aq.Sol.Chemical Formula: Not applicable.

Hazards IdentificationPotential Acute Health Effects:Very hazardous in case of eye contact (irritant), of ingestion. Hazardous in case of skin contact (irritant), of inhalation. Noncorrosive for skin. Non-sensitizer for skin. Non-permeator by skin. Inflammation of the eye is characterized by redness, watering, and itching.Potential Chronic Health Effects:Very hazardous in case of eye contact (irritant), of ingestion. Hazardous in case of skin contact (irritant), of inhalation. Noncorrosive for skin. Non-sensitizer for skin. Non-permeator by skin. DEVELOPMENTAL TOXICITY: Not available. The substance is toxic to kidneys, liver. Repeated or prolonged exposure to the substance can produce target organs damage.

First Aid MeasuresEye Contact:Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical attention.Skin Contact:After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cold water may be used. Cover the irritated skin with an emollient. If irritation persists, seek medical attention.Serious Skin Contact:Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention.Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.Ingestion:Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.

Fire and Explosion DataFlammability of the Product: Non-flammable.Auto-Ignition Temperature: Not applicable.Flash Points: Not applicable.Flammable Limits: Not applicable.Products of Combustion: Not available.

Accidental Release MeasuresSmall Spill:Dilute with water and mop up, or absorb with an inert dry material and place in an appropriate waste disposal container. If necessary: Neutralize the residue with a dilute solution of sodium carbonate. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.Large Spill:Absorb with an inert material and put the spilled material in an appropriate waste disposal. Neutralize the residue with a dilute solution of sodium carbonate. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system. Be careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS and with local authorities.

Handling and StoragePrecautions:Do not breathe gas/fumes/ vapour/spray. In case of insufficient ventilation, wear suitable respiratory equipment If you feel unwell, seek medical attention and show the label when possible. Avoid contact with skin and eyesStorage:No specific storage is required. Use shelves or cabinets sturdy enough to bear the weight of the chemicals. Be sure that it isnot necessary to strain to reach materials, and that shelves are not overloaded.

Exposure Controls/Personal ProtectionEngineering Controls:Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value.Personal Protection:Splash goggles. Lab coat. Vapor respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.Personal Protection in Case of a Large Spill:Splash goggles. Full suit. Vapor respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.Exposure Limits:Ferric ammonium sulfate dodecahydrate TWA: 1 (mg/m3) from ACGIHConsult local authorities for acceptable exposure limits.

Physical and Chemical PropertiesPhysical state and appearance: Liquid.Odor: Not available.Taste: Not available.Molecular Weight: Not applicable.Color: Not available.pH (1% soln/water): Acidic.Boiling Point: The lowest known value is 100C (212F) (Water).Melting Point: Not available.Critical Temperature: Not available.Specific Gravity: Weighted average: 1.38 (Water = 1)Vapor Pressure: The highest known value is 17.535 mm of Hg (@ 20C) (Water).Vapor Density: The highest known value is 0.62 (Air = 1) (Water).Volatility: Not available.Odor Threshold: Not available.Water/Oil Dist. Coeff.: Not available.Ionicity (in Water): Not available.Dispersion Properties: See solubility in water.Solubility: Easily soluble in cold water.

Stability and Reactivity Data

Stability: The product is stable.Instability Temperature: Not available.Conditions of Instability: Not available.Incompatibility with various substances: Not available.Corrosivity: Non-corrosive in presence of glass.Special Remarks on Reactivity: Not available.Special Remarks on Corrosivity: Not available.Polymerization: No.

Toxicological InformationRoutes of Entry: Absorbed through skin. Dermal contact. Eye contact. Inhalation. Ingestion.Toxicity to Animals: Not available.Chronic Effects on Humans: The substance is toxic to kidneys, liver.Other Toxic Effects on Humans:Very hazardous in case of ingestion. Hazardous in case of skin contact (irritant), of inhalation. Non-corrosive for skin. Nonsensitizer for skin. Non-permeator by skin.Ecotoxicity: Not available.Products of Biodegradation:Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.Toxicity of the Products of Biodegradation: The product itself and its products of degradation are not toxic.