MCL18IWVSKIT

#0118V

pg. 3

this tool is a beast!!!!!!! read the full review @ www.matcotools.com

Professional Mechanic from: Baltimore, MD, USA

$581.95

More power, longer run time, and lighter weight!

1/2" IMPACT WRENCH KITSuper high-output drive-train engineered with the best power-to-weight ratio of any 1/2" cordless impactClass leading 725 ft. lbs of breakaway torque.Precise variable-speed trigger with one-hand forward/reverse switchConvenient, trigger-activated LED lightCompact and rugged design for superior portability and durability

FREE 8 PIECE IMPACT SOCKET SETwith the purchase of saupM126rB

1/4" DRIVE 12 PIECE METRIC 6 POINT UNIVERSAL IMPACT SOCKET SET

SAIP86R

For more exclusive Torque Tips and information, register on www.matcotools.com

Why lithium-ion?With over twice the energy density of NiCd batteries you can complete your job between recharges saving you down time.Power tools with lithium-ion have an integrated circuit built into the battery charger and recharge up to 80% in less than 30 minutes which means a spare battery is not even necessary.They are also much lighter and reduce fatigue and smaller in design.

Remember: Lithium ion batteries, like all rechargeable batteries are recyclable and should be recycled.

pr

January 14 - 30, 2012

MCL18IWVSKIT KIT ConTAInS: • One MCL18IWVS 1/2" impact wrench • One MCL18LB 3.0Ah 18V Lithium battery • One MCLCHRG universal charger capable of charging Matco 10.8V, 14.4V, and 18V lithium batteries

• Product comes in a heavy duty blow mold case for travel or storage

Save over $45

12, 16, 20,58

$98.95valuesee

inside

yOuR PROduCTIvITy

2 www.matcotools.com

Buy THIS SALXK3TA

GET THIS AX18LA FREE

6"

$129.95

pr

SAXW4T

1/4" DRIVE 4 PIECE CHROME WOBBLE EXTENSION SET • Knurled shank provides a firm, non-slip grip • 5/16" shank diameter • Four lengths means no need to "stack" extensions • 4-piece set includes 1.5", 2", 4", and 6" length extensions

SAM106TB

1/4" DRIVE 10 PIECE METRIC 6 POINT CHROME SOCKET SET • Opti-Torque applies torque to fastener sides - not corners • Easy-Read Hi-Visibility laser etched markings • Includes sizes: 5mm - 14mm

AX18LA

1/4" DRIVE CHROME LOCKING EXTENSION • Semi-automatic locking mechanism firmly holds socket in place • Sliding knurled collar unlocks socket for easy replacement • Overall length: 18"

SALXK3TA

1/4" DRIVE 3 PIECE CHROME LOCKING EXTENSION SET • Single Body Construction • Locking extensions feature a posi-grip tang • Semi-automatic locking mechanism holds socket in place • Permits quick engagement and release of socket • Sliding knurled collar "unlocks" socket for quick replacement • Includes 3", 7" and 15" extensions

SCXPB3T

1/2" DRIVE 3 PIECE IMPACT EXTENSION SET • Full selection of three 1/2" drive impact extensions in various lengths

• Includes sizes: 3", 5", 10"

TSS5A

1/2" DRIVE TWIST SOCKET SET • Removes damaged and rounded-off fasteners • Socket sizes: 3/4"-19mm, 13/16", 7/8", 15/16", 1"

FG275

26 BLADE OFFSET GAUGE • Twenty-six offset blades: .005, .006, .007, .008, .009, .010, .011, .012, .013, .014, .015, .016, .017, .018, .019, .020, .021, .022, .023, .024, .025, .026, .027, .028, .029, .030

• 45° offset length 1" • Overall blades size is 4" long by 1/2" wide • Marked with inch and metric size equivalents

$50.95Save over 15%

$111.95Save over 10%

$78.95Save 15%

$107.95Save over 5%

$14.95Save 9%

$59.90value

3

IMPACT SOCKETS

Buy THIS SAuPM126RB

GET THIS SAIP86R FREE

$449.95

pr

SAUPM126RB

1/4" DRIVE 12 PIECE METRIC 6 POINT UNIVERSAL IMPACT SOCKET SET • Pinless design for longer socket life with less breakage • 4 point contact spreads wrenching forces throughout the roundhead joint to increase durability • High Visibility markings are laser etched providing size information at a glance • EZ on and EZ off provides the right fit on the gun every time • Includes sizes: 5mm, 5.5mm, 6mm - 15mm

SAIP86R

1/4" DRIVE 8 PIECE SAE 6 POINT MID-LENGTH IMPACT SOCKET SET • Opti-Torque feature applies torque to fastener sides, not corners reducing fastener wear • Includes sizes: 1/4", 9/32', 5/16", 11/32", 3/8", 7/16", 1/2", 9/16"

Buy SAUPM126RB and receive SAIP86R FREE!

EP3224RB

1" DRIVE TO 3/4" MALE DRIVE IMPACT ADAPTER • Replaceable insert bit held in adapter body with retention pin

• Ball and spring socket retention

SBIPM126TA

3/8" DRIVE 12 PIECE METRIC 6 POINT MID-LENGTH IMPACT SOCKET SET • Hi-Visibility to identify socket sizes at a glance with oversized laser markings

• Opti-Torque applies torque to fastener sides, not corners which allows more torque to fastener and longer life

• Counter-Torque distributes the torquing stress uniformly throughout the socket extending socket life

• Socket rail - color coded, unique spring loaded ball allows easy socket removal and replacement

• Includes sizes: 8mm - 19mm

TSS5D

1/2" DRIVE DEEP TWIST SOCKET SET • Deep well sockets for extended reach • Specially designed to remove rounded and damaged lug nuts, locks, bolts, and other fasteners

• Includes sizes: 3/4", 13/16", 7/8", 15/16", 1"

$48.95Save 10%

$147.95Save over $15

$117.95Save over $10

$98.95value

360° Rotation gives easier access

from any angle

4 www.matcotools.com

Power & Performancefor the entire charge cycle

ASK YOUR DISTRIBUTOR FOR A DEMO

EX C L U

SI

VE

MA

T C O

NEW

SHIELD™

Steel Toenumber# size

BU9007M7ST 7

BU9007M75ST 7.5

BU9007M8ST 8

BU9007M85ST 8.5

BU9007M9ST 9

BU9007M95ST 9.5

BU9007M10ST 10

BU9007M105ST 10.5

BU9007M11ST 11

BU9007M115ST 11.5

BU9007M12ST 12

BU9007M13ST 13

BU9007M14ST 14

Steel Toe/ Wide Widthnumber# size

BU9007W7ST 7

BU9007W75ST 7.5

BU9007W8ST 8

BU9007W85ST 8.5

BU9007W9ST 9

BU9007W95ST 9.5

BU9007W10ST 10

BU9007W105ST 10.5

BU9007W11ST 11

BU9007W115ST 11.5

BU9007W12ST 12

BU9007W13ST 13

BU9007W14ST 14

Standard Toenumber# size

BU9007M7 7

BU9007M75 7.5

BU9007M8 8

BU9007M85 8.5

BU9007M9 9

BU9007M95 9.5

BU9007M10 10

BU9007M105 10.5

BU9007M11 11

BU9007M115 11.5

BU9007M12 12

BU9007M13 13

BU9007M14 14

Standard Toe/ Wide Widthnumber# size

BU9007W7 7

BU9007W75 7.5

BU9007W8 8

BU9007W85 8.5

BU9007W9 9

BU9007W95 9.5

BU9007W10 10

BU9007W105 10.5

BU9007W11 11

BU9007W115 11.5

BU9007W12 12

BU9007W13 13

BU9007W14 14

For more information SCAN the QR code or visit www.shieldboots.net/VIDEO.HTML

$131.99 $135.99/ Steel Toe

designed by mechanics for mechanics.

OnlY AvAIlABlE ThROUgh YOUR MATcO DISTRIBUTOR.

VIDEO PREVIEW

More power, longer run time, and lighter weight!

pr

KIT INCLUDES: • (1) MCL144DDSL 14.4V 3/8" drill driver • (1) MCL144LB 14.4V 3.0Ah lithium battery • (1) MCLCHRG Lithium universal charger • All product held in blow molded case

MCL144DDSLK

3 PIECE 14.4V LITHIUM DRILL DRIVER KIT • 14.4V drill features short 7 series motor for compact size without sacrificing power

• SL model indicates drill incorporates spindle lock feature

• Trigger activated LED

ShIElD FOOT-gEAR - JODPhER

• Full grain leather and ballistic nylon upper

• Direct attached non-slip oil resistant outsole

• Extreme abrasion toe and heel guard

• Available in sizes 8-14, wide widths, and steel toe options.

$446.95Save over $60

135º

••

••

• •

DMC13

5

MASTER KIT10.8v POlIShER AnD FInE

SAnDER MASTER KIT

3"

NEW

designed by mechanics for mechanics.

OnlY AvAIlABlE ThROUgh YOUR MATcO DISTRIBUTOR.

BEST - Cobalt Drill Bits 8% Cobalt for higher heat and abrasion resistance.

Heavy duty spiral flute produces faster chip ejection

Shorter cutting lips reduce torque when drilling in high tensile strength materials

135° split point reduces feed pressure for easier penetration without work hardening

Cobalt drills last twice as long as conventional drills when used on extremely abrasive material and run at the proper RPM.

The Infinium™ next generation batteries feature:

• No memory build-up

• Longer lifespan

• Fuel gauge quickly indicates battery charge

MUC108MPKIT

10.8V POLISHER AND FINE SANDER MASTER KIT • Compact size and lightweight for superior control, feel, and maneuverability

• Super duty drivetrain for reliable performance under load

• Ideal for polishing and fine-sanding in tight areas and workspace inaccessible by other power tools

MUC108MPKIT

KIT INCLUDES: • (1) MUC108MP 10.8V mini polisher • (1) MUC108LC 10.8V quick charger • (1) MUC108LB 10.8V lithium battery • (1) 10.8V Infinium carry bag (INFINBAG108)

DMC13

13 PIECE COBALT DRILL BIT SET • Set contains thirteen sizes from 1/16" to 1/4" in 1/64" increments plus a metal drill index

• Cobalt features self centering feature that won't walk

135° SPLIT POINT: CObaLT Self Centering - won’t walk

For portable drills

For harder materials

Requires less force than high speed drill bits 135°

POINT ANGLE

SGnBS3

3 PIECE SOFT GRIP NARROW BRUSH SET • Soft Grip Narrow Brush Set made of PP+TPR soft grip handle

• Set includes 1 brush each with brass stainless steel and nylon wire

• Brushes have 3 x 10 row wires

BH16DB

DEADBLOW BALL PEEN HAMMER • Shot-filled head reduces rebound effect

• Compothane ball peen hammer

DRILL BIT SELECTION

Material Cobalt

Point AngleSheet Metal

Mild Steel

High Alloy Steels

Stainless Steels

Cast Iron

Aluminum, Brass, Copper

Plastic

RECOMMENDED ACCEPTABLE

Tip Geometry

pr

Save over $25

$60.95

$6.95$60.95Save 5%

30 30

36 36

40 40

46 46

50 50

60 60

56 56

66 66

Bail this bad boy out for only

Bail this bad boy out for only

Bail this bad boy out for only

6 www.matcotools.com

MT1758A MT2834

MT2871R

$167.95

EX C L U

SI

VE

MA

T C O

NEW

Accused of:

Slicing through the toughest materials with ease. Expresses no remorse!

Accused of:

Over powering the competition!

Accused of: Breaking into small spaces with precise speed and power!

pr

MT2871R

3" HEAVY DUTY REVERSING CUT-OFF TOOL • 0.8 HP motor for increased power • Unique adjustable locking guard allows for end user to rotate to 16 positions

• Reversing collar allows end user to quickly switch from forward to reverse and direct sparks away from work

• Safety lever throttle • Uses 3" cut off wheels

MT2834

1/4" PALM RATCHET • New composite housing design for improved look and comfort

• Throttle lever with tapered valve provides some speed control

• Built in regulator to control power • Tumbled cylinder and motor system provide additional speed and power

• Optional head boot available, P/N MT2835PC • Matco patented head design with built in grease fitting

MT1758A

1/2" IMPACT WRENCH • Combines power, speed and durability for all automotive service applications

• Working Torque 40-400 ft.lbs • Max Torque 600 ft.lbs. in reverse • Six position power regulator allows the operator to control or reduce power in one direction while maintaining full power in the reverse direction

• Protective Rubber housing and hammer case bumper protects the tool

Verdict: Verdict: Verdict:

$162.95Save over $20

$295.95Save over $50

GUILTYGUILTYGUILTY

30 30

36 36

40 40

46 46

50 50

60 60

56 56

66 66

Bail this bad boy out for only

Bail this bad boy out for only

Bail this bad boy out for only

MATCO'S BAd BOyS Here's the Line-UpMeet

7

MT2885KSE137

MT1745

Accused of:

Delivering high performance!

Accused of: Drilling in restricted areas! Can't keep this bad boy out!

Accused of:

Accessing hard to reach areas. Slips past the tightest security!

pr

MT1745

1/4" MINI COMPOSITE IMPACT WRENCH • Ideal for fastening in hard to reach areas where most tools can't go such as under the dash work and small engine repair

• Excellent power to weight ratio gets the job done with less fatigue

• Durable composite housing makes this tool lightweight, comfortable, and chemical resistant

• Dust free forward/reverse lever • Variable speed throttle for maximum control

Verdict:

Verdict:

Verdict:

MT2885K

1/2 HP 2" ANGLE GRINDER KIT • High performance efficient 1/2 HP motor for extra torque, and extended durability

• Kit includes the grinder with guard, two (2) 60 grit grinding discs, one (1) 80 grit grinding disc, and one (1) 120 grit grinding disc

• The most power available in a mini style limited clearance grinder

SE137

3/8" REVERSIBLE ANGLE DRILL • Ideal for drilling in restricted areas that require 3½" clearance

• Variable speed throttle lever and convenient reverse button

• RPMs - 1,600,  .45 Horsepower • Keyed Jacobs Chuck

Save over $20$182.95

Save over $25

$196.95Save over $20

$169.95Save $15

GUILTY

GUILTYGUILTY

www.matcotools.com

SUPER EASY ACCESSWITH THESE KEY TOOLS NEEDED FOR SPEEDY LOCK-OUT SERVICE.

8 pr

LT145A

SUPER EASY ACCESS & LT275 KIT • Improved Easy Access Kit • 4 Piece lockout tool features center thread to eliminate storage problems

• Rigid design for easy through the window reach

• Allows you to open the vehicle with door handle lock button or electric switch

• Includes 4 piece lockout tool, plastic slip jim, 2 plastic wedges, and LT275 Inflate-a-Wedge

• NOT AvAILABLE FOR SALE IN ALL AREAS. See your Matco distributor for details

MLK1000

20 PIECE MASTER LOCK-OUT KIT • Contains 18 pieces making it the most comprehensive lock-out kit available

• Includes a fully illustrated instruction manual

• Includes the LT275 Inflate-A-Wedge • Packaged in a Heavy Duty Blow Molded case with vinyl Inserts

• NOT AvAILABLE FOR SALE IN ALL AREAS. See your Matco distributor for details

$86.95Save 8%

$214.21Save over $20

MASTER LOCK-OUT KIT

SUPER EASY ACCESS KIT

9pr

CP710

500 AMP CARBON PILE LOAD TESTER • Tests batteries rated as high as 1000 CCA or 160 Amp hour

• Use to simulate actual cranking loads • Test alternators, regulators and starters • Large dual meters display the battery voltage and load current simultaneously, during the test

• Includes temperature compensation chart

CT60K

COMPRESSION TESTING SET • Complete set compression testing on gasoline engines, including domestic, imports, motorcycles, marine, and small engines

• Extra long 25" flex hose with quick coupler, 2-1/2"gauge with chrome bezel and rugged protective outer boot

• Dual scale gauge reads 0-300PSI and 0-21 kg/cm2 • Adapters included: 12" flex-14mm standard and long reach, 18mm, 10mm, and 12mm threads

CLT2APB

CYLINDER LEAKAGE TESTER • This tester measures the ability of an engine cylinder to hold compressed air using shop air pressure and supplements a compression tester

• Has a precision regulator with a combination M14 and M18 adapter on a 26" hose assembly

• The 2¼" special gauge has one multicolored band for measuring low, moderate and high leakage, and a scale range from 0-100%

• The second gauge is 2¼" and has a dual scale dial with ranges from 0-100 PSI and 0-7 bar, which allows the Technician to monitor input air-line pressure

RTJ69

RELAY TEST JUMPER WIRE SET • Complementary to RTK810 and RTK815. Use to easily connect to a multimeter

• Use the banana plug adapters for use with pin probes • Also has a jumper wire to use between common and open to close the circuit for testing. This wire has a test port for connecting to a multimeter to check voltage drop

TLS266

EASY ACCESS SCOPE SERIES BACK PROBES • Featuring four color-coded, extra-long 76" double insulated silicone test leads (IEC Rated 1000V CAT III 20 Amp)

• Also included are four color-coded easy access back probes allow connectivity to fuel injectors MAP, TPS sensors as well as any weather pack seal-type connectors

• Packed in a four-pocket test lead organizer for convenient storage

TLS535

DELUXE AUTOMOTIVE KIT • Fifteen-piece modular kit includes: • Test Leads, Extension Leads, Couplers, Back Probe Pins, Large Croc Clips, Cable Piercers, Bed-of-Nails Clips, and Fused Link

• All items packed in a hard plastic storage case

$135.95Save nearly $30

$106.00Save over 20%

$121.95Save 10%

$17.95Save over 10%

$70.95Save over $10

$172.95Save over $15

TEST BATTERIES AS HIGH AS 1000 CCA

limited quantities

10 www.matcotools.com

MATCO

GEAR

PDMJKT32S S $89.95PDMJKT32M M $89.95PDMJKT32L L $89.95

PDMJKT32XL XL $89.95PDMJKT32XXL XXL $94.95

PDMJKT32XXXL XXXL $94.95

$49.95

$59.95

PDMT225M M $31.95PDMT225L L $31.95

PDMT225XL XL $31.95PDMT225XXL XXL $37.95

PDMT225XXXL XXXL $37.95

$28.95

PDMS18M M $59.95PDMS18L L $59.95

PDMS18XL XL $59.95PDMS18XXL XXL $69.95

PDMS18XXXL XXXL $69.95

pr

MATCO TOOLS COLLECTIBLES & APPAREL

STEELTRUCK11

STAMPED STEEL MATCO TRUCK • 1/18 Scale old-time steel toy truck...just like in the 60's! • Complete with a "load" of 6 miniature cases of Matco Tools • Stamped steel body chassis and wheels • Operating dump truck features a lift handle and opening rear tail gate • Limited quantities

NAVY EISENHOWER JACKET • Built for comfort and style. • This 65/35 poly/cotton shell lined jacket has 100% polyester foam fill. Embroidery on left chest and full back

• Two front pockets, pencil pocket on left sleeve and inside pocket

• Dark navy jacket available in S - 3XL

DUKES OF MATCO SWEATSHIRT • Comfortable and loaded with style.

UNCLE SKULL LONG SLEEVE TEE • Uncle Skull wants you to be noticed in his long sleeve tee!

PDnV69

H-D CLASSIC BLACK ZIPPO • This classic Harley-Davidson Zippo is a staple the everyone needs!

• Black matte with Harley-Davidson Bar & Shield Logo

PDRMC4

RAT FINK BEANIE CAP • Rat Fink on one side and the "Rat" on the other are both embroidered

save over $35

11

$192.95

pr

SE1315

AIR SAW WITH SWIVEL INLET • Cuts pipe, mild steel, aluminum, plastic & sheet metal up to 16 gauge

• Not recommended for fiberglass • Includes: MT14 air swivel and 3 bi-metal blades (18 tpi, 24 tpi, 32 tpi)

MS15

MECHANIC'S SEAT WITH DRAWERS • Four 3" polyurethane wheels with full bearing casters • Powder coat finish • Fully upholstered padded seat • 17-1/8" to 21-5/8" adjustable height • Two small drawers: 13-1/2"w x 7"d x 1-3/4"h • One big drawer: 13-1/2"w x 7"d x 3-1/2"h

SE510

3" CUT OFF TOOL • Easily cuts through materials such as plastic, aluminum, steel, and iron tubing

• Ergonomic designed housing for comfort • Includes heavy-duty metal guard • Uses Matco 3" cut-off wheels

SPDL5KA

5 PIECE LONG TAPERED DRIFT PUNCH SET • Set of longer drift punch sizes for hard-to-reach applications

• Vinyl kit bag • Set includes" 3/32"x8", 1/8"x8", 3/16"x12", 1/4"x14", and 5/16"x16" drift punches

SPL25KA2

25 PIECE MASTER PUNCH AND CHISEL SET • 7 Cold Chisels from 5/16" to 7/8" • 6 Pin Punches from 3/32" to 5/16" • 6 Starter Punches from 3/32" to 1/4" • 3/16" and 5/16" Center Punches • 4 Specialty punches and chisels • Rugged, non-marring Kit Bag indexed for convenient storage • Includes sizes: 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 7"

SQM62R

1/2" DRIVE 6 PIECE METRIC TRIPLE SQUARE BIT SOCKET SET • Includes sizes: 8mm, 10mm, 12mm, 14mm, 16mm, 18mm

ISA412

INPUT SHAFT ALIGNMENT TOOL • Works on manual and electronic shift transmissions in large trucks with 1-3/4" and 2" splined shafts

• Tool is inserted through inspection plate and onto the input shaft

• Transmission is aligned with clutch brake by turning the input shaft

Save over $35

$102.95Save over 5% $90.95

Save over $15

$140.95Save over $15

$385.95Save over $104

$108.95Save over $13

$24.95Save over 5%

300 lb. Capacity

WORKS ON MANUAL AND ELECTRONIC SHIFT TRANSMISSIONS

facebook.com/matcotools

ww

w.m

atco

too

ls.c

om/m

ade-

by-

ideaScan this

QR code for details!

Buy THIS SCdPM116TA

GET THIS CuP2BC FREE

$256.90

$51.95

The products on Matco’s National Promo are limited in quantity and subject to availability. Matco reserves the right to correct printing errors.

JOIN US ON FACEBOOK

Got an idea?Get $2,500+

Have an idea for a new product? Matco wants to hear about it!

1 Submit your product idea to Matco

2 If we launch your product, you get cash — at least $2,500!

3 Wait, there's more to win! Through March 31, 2012, every qualified entry could win an Apple® iPad 2 16GB with Wi-Fi. The more ideas you bring to Matco, the more you can win!

SCDPM116TA

1/2" DRIVE 11 PIECE METRIC 6 POINT DEEP IMPACT SOCKET SET • High visibility laser markings • Opti-Torque - Applies torque to fastener sides not corners - allowing more torque to be applied to fastener

• High strength alloy • Includes sizes: 10mm - 19mm, 21mm

CUP2BC

1/2" DRIVE IMPACT UNIVERSAL JOINT • Converts standard impact sockets into universal impact sockets

MU3A

UNIBIT STEP DRILL • 1/4" to 3/4" hole sizes (1/16" step increments)

PFC440

PNEUMATIC FAN CLUTCH SET • Quickly removes and installs the fan clutch when repairing the water pump or fan clutch

• Does the job much faster than conventional fan clutch wrenches

• Set includes 7 driving wrenches that fit Ford, GM and Chrysler. 7/8", 32mm, 36mm, 40mm, 47mm, 1-7/8" and 2"

• Set comes in plastic storage case

DT100

DIGITAL TIRE PRESSURE GAUGE • Reads up to 100 PSI in .5 increments • Automatic shut off 15 seconds after use to prolong battery life • Operating temperature range from 15° - 110° Fahrenheit

PR0112RED

$56.95

$210.95Save over $10

$22.95Save over $5

value!