martini indoor eng 2011 p2
DESCRIPTION
MARTINI INDOOR ENG 2011 P2TRANSCRIPT
-
253
Witra
-
254
design: Marco Casamonti, Alessandro Papotti
Witra arch, adjustable in glass
Body Extruded aluminium structure. Lamp sup-port consists of a glass ring and a die-cast aluminium fork, for gyroscopic adjust-ment.
Light sourcesAR111 halogen lamps with incorporated reflector; PAR30 metal halide lamp.
EmissionsDependent on the type of lamp used.
Power supplyDirect from the electricity mains by means of electronic or electromagnetic trans-formers installed in the product.
AccessoriesSafety glass for AR111 halogen lamps.
ColoursSatin-finish grey body and acid-treated white glass.
adjustable die-cast fork
-
255
214
214
214
120
120
120
4646
4646
4646
250
325
490
214
120
4646
650
96
adjustable in glass, arch Witra
Light source Wattage Socket W [kg] Code
AL AR111 100 W G53 1.00 22380.96
Light source Wattage Socket W [kg] Code
AL AR111 2100 W G53 1.80 22382.96
Light source Wattage Socket W [kg] Code
AL AR111 3100 W G53 2.70 22383.96
IP20integrated electronic control gearlamp photometric data - see page 543
IP20integrated electronic control gearlamp photometric data - see page 543
IP20integrated electronic control gearlamp photometric data - see page 543
accessories
safety glass kit for AR111 lamps code 92085.00
Light source Wattage Socket W [kg] Code
AL AR111 4100 W G53 3.60 22384.96
IP20integrated electronic control gearlamp photometric data - see page 543
-
256
214
120
4646
500
96
Witra adjustable in glass, arch
Light source Wattage Socket W [kg] Code
MH PAR30 35 W E27 1.40 22379.96MH PAR30 70 W E27 1.40 22381.96
IP20integrated electromagnetic control gearlamp photometric data - see page 543
-
257
design: Marco Casamonti, Alessandro Papotti
mounting 1, adjustable in glass Miniwitra
Body Extruded aluminium and sheet steel structure.Lamp support consists of a glass ring for gyroscopic adjustment.
Light sourcesHalogen lamps with incorporated reflec-tor and GU5.3 socket.
EmissionsDependent on the type of lamp used.
Power supplyDirect from the electricity mains by means of electronic transformers in-stalled in the product.
ColoursSatin-finish grey body and acid-treated white glass.
rotation of 110gyroscopic lamp adjustment
-
258
96
462
556
650
190
190
190
153
153
153
Miniwitra mounting 1, adjustable in glass
Light source Wattage Socket W [kg] Code
AL QR-CB51 250 W GU5.3 2.00 22388.96
Light source Wattage Socket W [kg] Code
AL QR-CB51 350 W GU5.3 2.20 22389.96
Light source Wattage Socket W [kg] Code
AL QR-CB51 450 W GU5.3 2.40 22390.96
IP20integrated electronic control gearlamp photometric data - see page 542
IP20integrated electronic control gearlamp photometric data - see page 542
IP20integrated electronic control gearlamp photometric data - see page 542
-
259
design: Marco Casamonti, Alessandro Papotti
recessed, adjustable in glass Miniwitra
Body Sheet steel structure with visible frame. Lamp support consists of a double glass ring for gyroscopic adjustment.IP20 fixture, IP23 when installed in the visible part.
Light sourcesHalogen lamps with incorporated reflector and GU5.3 socket.
EmissionsDependent on the type of lamp used.
Power supplyDirect from the electricity mains by means of electronic transformers.
AccessoriesElectronic ballasts.
ColoursSatin-finish grey frame and acid-treated white glass.
gyroscopic lamp adjustment
-
260
118
118118
46
167
35
21
118
108
131
131
131
131
90
9090
241
11822835
190
131
118338
34
96
Miniwitra recessed, adjustable in glass
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 50 W GU5.3 0.42 35740.96
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 50 W GU5.3 0.63 35741.96
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 250 W GU5.3 1.05 35742.96
IP23control gear available as an accessorylamp photometric data - see page 542
IP23control gear available as an accessorylamp photometric data - see page 542
IP23control gear available as an accessorylamp photometric data - see page 542
Plasterboard drilling
Plasterboard drilling
accessories
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
electronic transformer 105 W 230/240 V 50/60 Hz.code 4.94094.81
Plasterboard drilling
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 350 W GU5.3 1.40 35743.96
IP23control gear available as an accessorylamp photometric data - see page 542
Plasterboard drilling
-
261
241
90
241
228228
46
167
35
21
118
108
34
96
recessed, adjustable in glass Miniwitra
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 450 W GU5.3 1.80 35744.96
IP23control gear available as an accessorylamp photometric data - see page 542
Plasterboard drilling
accessories
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
electronic transformer 105 W 230/240 V 50/60 Hz.code 4.94094.81
-
262
Miniwitra semi-recessed, adjustable in glass
design: Marco Casamonti, Alessandro Papotti
Body Sheet steel structure with visible frame. Lamp support consists of a glass ring for gyroscopic adjustment and a die-cast alu-minium fork.
Light sourcesAR70 halogen lamps with incorporated reflector.
EmissionsDependent on the type of lamp used.
Power supplyBy means of electronic transformers.
AccessoriesElectronic transformers.
ColoursSatin-finish grey frame and acid-treated white glass.
adjustable die-cast fork
-
263
198 11
0
131
118188
198
198
110
110
241
241
131
241
118228
118228
46
167
35
21
118
108
34
96
semi-recessed, adjustable in glass Miniwitra
accessories
Light source Voltage Wattage Socket W [kg] Code
AL AR70 12 V 50 W BA15d 0.70 35700.96
IP20control gear available as an accessorylamp photometric data - see page 542
Plasterboard drilling
Light source Voltage Wattage Socket W [kg] Code
AL AR70 12 V 250 W BA15d 1.30 35702.96
Light source Voltage Wattage Socket W [kg] Code
AL AR70 12 V 450 W BA15d 2.70 35708.96
IP20control gear available as an accessorylamp photometric data - see page 542
IP20control gear available as an accessorylamp photometric data - see page 542
Plasterboard drilling
Plasterboard drilling
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
electronic transformer 105 W 230/240 V 50/60 Hz.code 4.94094.81
-
264
design: Marco Casamonti, Alessandro Papotti
Miniwitra arch, adjustable in glass
Body Extruded aluminium and sheet steel structure.Lamp support consists of a glass ring for gyroscopic adjustment and a die-cast alu-minium fork.
Light sourcesAR70 halogen lamps with incorporated reflector.
EmissionsDependent on the type of lamp used.
Power supplyDirect from the electricity mains by means of electronic transformers installed in the product.
ColoursSatin-finish grey body and acid-treated white glass.
adjustable die-cast fork
-
265
8015
3
4646
160
8015
3
4646
240
8015
3
4646
360
96
arch, adjustable in glass Miniwitra
Light source Wattage Socket W [kg] Code
AL AR70 50 W BA15d 0.50 22370.96
Light source Wattage Socket W [kg] Code
AL AR70 250 W BA15d 0.80 22372.96
Light source Wattage Socket W [kg] Code
AL AR70 350 W BA15d 1.80 22373.96
IP20integrated electronic control gearlamp photometric data - see page 542
IP20integrated electronic control gearlamp photometric data - see page 542
IP20integrated electronic control gearlamp photometric data - see page 542
-
266
-
267
-
268
Wipp/Miniwipp multi-lamp, adjustable in metal
design: Martini Staff
Wipp
pendant page 270 mounting page 274 floor-standing fixture page 277 recessed fixture page 279
semi-recessed fixture page 283 arch page 286
for a wider range, see catalogue
-
269
Wipp/Miniwipp
The extreme flexibility of Witra products in terms of installation and operation has led to the creation of the Wipp/Miniwipp range, in which a double aluminium ring is used to support the light source.
All product parts are in satin-finish grey, which further enhances the architectur-ally light appearance of the range and makes it suitable for almost any applica-tion.
gyroscopic lamp adjustment
Miniwipp
mounting page 289 recessed fixture page 291
-
270
Wipp pendant, adjustable in metal
design: Martini Staff
BodyAluminium structure. Lamp support con-sists of a double aluminium ring for gyro-scopic adjustment.
Light sourcesAR111 halogen lamps with incorporated reflector. Wattages between 50 and 100 W may be installed, depending on the version.
EmissionsDependent on the type of lamp used.
Power supplyDirect from the electricity mains by means of electronic transformers installed in the product.
AccessoriesSafety glass for AR111 halogen lamp.
ColoursSatin-finish grey, white or metalized bronze.
gyroscopic lamp adjustment
controlled height adjustment
-
271
422
365
577
365
768
205
11 8215
pendant, adjustable in metal Wipp
Light source Wattage Socket W [kg] Code
AL AR111 4100 W G53 3.50 52066.__
Light source Wattage Socket W [kg] Code
AL AR111 650 W G53 4.10 52067.__
IP20integrated electronic control gearlamp photometric data - see page 543
IP20integrated electronic control gearlamp photometric data - see page 542
max
. 150
0
accessories
safety glass kit for AR111 lampscode 92085.00
max
. 150
0
Light source Wattage Socket W [kg] Code
AL AR111 450 W G53 3.20 22354.__
IP20integrated electronic control gearlamp photometric data - see page 542
max
. 150
0
-
272
575
914
205
1114
205
11 8215
Wipp pendant, adjustable in metal
Light source Wattage Socket Optic W [kg] Code
AL AR111 2100 W G53 3.40 22362.__FL T5 24 W G5 Darklight
IP20integrated electronic control gearlamp photometric data - see page 543
accessories
max
. 150
0
safety glass kit for AR111 lamps code 92085.00
Light source Wattage Socket W [kg] Code
AL AR111 650 W G53 3.80 22356.__
IP20integrated electronic control gearlamp photometric data - see page 542
max
. 150
0
-
273
Wipp
-
274
Wipp mounting, adjustable in metal
design: Martini Staff
BodyAluminium structure. Lamp support con-sists of a double aluminium ring for gyro-scopic adjustment.
Light sourcesAR111 halogen lamps with incorporated reflector. Wattages between 50 and 100 W may be installed, depending on the ver-sion.
EmissionsDependent on the type of lamp used.
Power supplyDirect from the electricity mains by means of electronic transformers installed in the product.
AccessoriesSafety glass for AR111 halogen lamps.
ColoursSatin-finish grey, white or metalized bronze.
Wipp mounting 1
Wipp mounting 2
gyroscopic lamp adjustment
rotation of 110
-
275
539
692
845
150
150
150
205
205
205
40
40
40
11 8215
adjustable in metal, mounting 1 Wipp
Light source Wattage Socket W [kg] Code
AL AR111 250 W G53 2.10 22320.__
Light source Wattage Socket W [kg] Code
AL AR111 350 W G53 2.50 22330.__
Light source Wattage Socket W [kg] Code
AL AR111 450 W G53 2.90 22340.__
IP20integrated electronic control gearlamp photometric data - see page 542
IP20integrated electronic control gearlamp photometric data - see page 542
IP20integrated electronic control gearlamp photometric data - see page 542
accessories
safety glass kit for AR111 lamps code 92085.00
-
276
386
150
355 40
539
150
355 40
692
355 40
150
11 8215
Wipp adjustable in metal, mounting 2
Light source Voltage Wattage Socket W [kg] Code
AL AR111 230/12 V 2100 W G53 2.00 22224.__
Light source Wattage Socket W [kg] Code
AL AR111 4100 W G53 3.00 22244.__
IP20integrated electronic control gearlamp photometric data - see page 543
IP20integrated electronic control gearlamp photometric data - see page 543
accessories
safety glass kit for AR111 lamps code 92085.00
Light source Wattage Socket W [kg] Code
AL AR111 650 W G53 4.00 22264.__
IP20integrated electronic control gearlamp photometric data - see page 542
-
277
design: Martini Staff
floor-standing fixture, adjustable in metal Wipp
BodyAluminium structure. Lamp support consists of a double aluminium ring for gyroscopic adjustment.
Light sourcesMH CDM-R111 or AR111 halogen lamps with incorporated reflector.
EmissionsDependent on the type of lamp used.
Power supplyDirect from the electricity mains by means of electronic transformers in-stalled in the product.
AccessoriesSafety glass for AR111 halogen lamps.
ColoursSatin-finish grey, white or metalized bronze.
gyroscopic lamp adjustment
fixture head rotation of 90 multiple ignitions
-
278
500
500
355
355
2700
/ 32
0027
00 /
3200
90
90
90
90
11 8215
Wipp floor-standing fixture, adjustable in metal
accessories
Light source Wattage Socket H [mm] W [kg] Code
AL AR111 6100 W G53 2700 22.0 02261.__AL AR111 6100 W G53 3200 25.0 02263.__
Light source Wattage Socket H [mm] W [kg] Code
MH CDM-R111 635W GX8.5 2700 22.0 02262.__MH CDM-R111 635W GX8.5 3200 25.0 02264.__
IP20integrated electronic control gearlamp photometric data - see page 543
IP20integrated electronic control gearlamp photometric data - see page 543
safety glass kit for AR111 lamps code 92085.00
-
279
design: Martini Staff
recessed, adjustable in metal Wipp
BodySheet steel structure with visible frame. Lamp support consists of a double alu-minium ring for gyroscopic adjustment.IP20 fixture, IP23 when installed in the visible part.
Light sourcesAR111 halogen lamps with incorporated reflector; PAR30 and G12 metal halide lamp. Mixed light option: halogen+metal halide.
EmissionsDependent on the type of lamp used.
Power supplyDirect from the electricity mains by means of control gear units.
AccessoriesElectronic control gear.Safety glass for AR111 halogen lamps.
ColoursSatin-finish grey, white or metalized bronze.
gyroscopic lamp adjustment
-
280
H
H
H
181
181
181
168
168168
341
168328
181
46
167
32,5
156
163
84
35
21
118
108
34
11 8215
Wipp recessed, adjustable in metal
Light source Voltage Wattage Socket H [mm] W [kg] Code
AL AR111 12 V 100 W G53 110 1.30 35840.__
Light source Voltage Wattage Socket H [mm] W [kg] Code
AL AR111 12 V 100 W G53 110 1.30 35845.__
IP23control gear available as an accessorylamp photometric data - see page 543
IP23control gear available as an accessorylamp photometric data - see page 543
Plasterboard drilling
Plasterboard drilling
Light source Voltage Wattage Socket H [mm] W [kg] Code
AL AR111 12 V 2100 W G53 110 2.70 35850.__
IP23control gear available as an accessorylamp photometric data - see page 543
Plasterboard drilling
safety glass kit for AR111 lamps code 92085.00
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
electronic control gear MH 35 W cable L = 300 mmcode 35143.00
electronic control gear MH 70 Wcable L = 300 mmcode 35144.00
accessories
electronic transformer 105 W 230/240 V 50/60 Hz.code 4.94094.81
Light source Wattage Socket H [mm] W [kg] Code
MH 35/70 W G12 165 1.50 35847.__
IP23control gear available as an accessory
Light source Wattage Socket H [mm] W [kg] Code
MH 235/70 W G12 165 3.50 35852.__
IP23control gear available as an accessory
-
281
Wipp
-
282
H
501
168488
181
341
328328
341
46
167
32,5
156
163
84
35
21
118
108
34
H
11 8215
Wipp recessed, adjustable in metal
Light source Voltage Wattage Socket H [mm] W [kg] Code
AL AR111 12 V 3100 W G53 110 4.00 35855.__
IP20control gear available as an accessoryphotometric data for lamps with incorporated reflector, see page 543
Plasterboard drilling
Light source Voltage Wattage Socket H [mm] W [kg] Code
AL AR111 12 V 100 W G53 165 5.20 35857.__MH / 235/70 W G12
IP20control gear available as an accessoryphotometric data for lamps with incorporated reflector, see page 543
Light source Voltage Wattage Socket H[mm] W [kg] Code
AL AR111 12 V 4100 W G53 110 6.00 35875.__
IP20control gear available as an accessoryphotometric data for lamps with incorporated reflector, see page 543
Plasterboard drilling
safety glass kit for AR111 lamps code 92085.00
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
electronic control gear MH 35 W cable L = 300 mmcode 35143.00
electronic control gear MH 70 Wcable L = 300 mmcode 35144.00
accessories
electronic transformer 105 W 230/240 V 50/60 Hz.code 4.94094.81
Light source Wattage Socket H [mm] W [kg] Code
MH PAR30 335/70 W E27 165 5.20 35884.__
IP23control gear available as an accessorylamp photometric data - see page 543
Light source Wattage Socket H [mm] W [kg] Code
MH PAR30 435/70 W E27 165 6.00 35879.__
IP23control gear available as an accessorylamp photometric data - see page 543
-
283
design: Martini Staff
semi-recessed, adjustable in metal Wipp
BodySheet steel structure with visible frame. Lamp support consists of an aluminium ring for gyroscopic adjustment and a die-cast aluminium fork.
Light sourcesAR111 halogen lamps with incorporated reflector; PAR30 metal halide lamp. A mixed light option is available on request: halogen+metal halide.
EmissionsDependent on the type of lamp used.
Power supplyDirect from the electricity mains by means of control gear units.
AccessoriesElectronic control gear.Safety glass for AR111 halogen lamps.
ColoursSatin-finish grey, white or metalized bronze.
The flush-fitted version without a visible frame is available on request.
adjustable die-cast fork
-
284
H
130
181
181
168168
H
130
341
181
168328
H
130
501
181
168488
H
130
341
341
328328
11 8215
Wipp semi-recessed, adjustable in metal
Light source Voltage Wattage Socket H [mm] W [kg] Code
AL AR111 12 V 100 W G53 110 1.70 35712.__
IP20control gear available as an accessory see page 285lamp photometric data - see page 543
Plasterboard drilling
Light source Wattage Socket H [mm] W [kg] Code
MH PAR30 35/70 W E27 165 1.90 35713.__
IP20control gear available as an accessory see page 285lamp photometric data - see page 543
Light source Voltage Wattage Socket H [mm] W [kg] Code
AL AR111 12 V 2100 W G53 110 3.50 35716.__
IP20control gear available as an accessory see page 285lamp photometric data - see page 543
Plasterboard drilling
Light source Wattage Socket H [mm] W [kg] Code
MH PAR30 235/70 W E27 165 3.90 35718.__
IP20control gear available as an accessory see page 285lamp photometric data - see page 543
safety glass kit for AR111 lamps code 92085.00
Light source Voltage Wattage Socket H [mm] W [kg] Code
AL AR111 12 V 3100 W G53 110 5.20 35720.__
IP20control gear available as an accessory see page 285lamp photometric data - see page 543
Plasterboard drilling
Light source Wattage Socket H [mm] W [kg] Code
MH PAR30 335/70 W E27 165 5.80 35722.__
IP20control gear available as an accessory see page 285lamp photometric data - see page 543
Light source Voltage Wattage Socket H [mm] W [kg] Code
AL AR111 12 V 4100 W G53 110 6.80 35728.__
IP20control gear available as an accessory see page 285lamp photometric data - see page 543
Plasterboard drilling
accessories
Light source Wattage Socket H [mm] W [kg] Code
MH PAR30 435/70 W E27 165 7.60 35730.__
IP20control gear available as an accessory see page 285lamp photometric data - see page 543
-
285
32,5
156
163
84
46
167
35
21
118
108
34
accessories Wipp
safety glass kit for high-pressure AR111 lamps code 92085.00
electronic control gear MH 35 W cable L = 300 mmcode 35143.00
electronic control gear MH 70 Wcable L = 300 mmcode 35144.00
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
electronic transformer 105 W 230/240 V 50/60 Hz.code 4.94094.81
-
286
design: Martini Staff
Wipp arch, adjustable in metal
BodyExtruded aluminium structure. Lamp support consists of an aluminium ring and fork, for gyroscopic adjustment.
Light sourcesAR111 halogen lamps with incorporated reflector; PAR30 metal halide lamp.
EmissionsDependent on the type of lamp used.
Power supplyAll halogen lamp products are supplied complete with electronic ballasts, while metal halide lamp products are supplied with electromagnetic ballasts.
AccessoriesSafety glass for AR111 halogen lamps.
ColoursSatin-finish grey, white or metalized bronze.
adjustable die-cast fork
-
287
214
214
120
120
4646
4646
250
325
214
120
4646
490
214
120
4646
500
11 8215
arch, adjustable in metal Wipp
Light source Wattage Socket W [kg] Code
AL AR111 100 W G53 1.00 22380.__
Light source Wattage Socket W [kg] Code
AL AR111 2100 W G53 1.80 22382.__
Light source Wattage Socket W [kg] Code
AL AR111 3100 W G53 2.70 22383.__
IP20integrated electronic control gearlamp photometric data - see page 543
IP20integrated electronic control gearlamp photometric data - see page 543
IP20integrated electronic control gearlamp photometric data - see page 543
accessories
safety glass kit for AR111 lampscode 92085.00
Light source Wattage Socket W [kg] Code
MH PAR30 35 W E27 1.30 22379.__MH PAR30 70 W E27 1.30 22381.__
IP20integrated electromagnetic control gearlamp photometric data - see page 543
-
288
Wipp
-
289
design: Martini Staff
adjustable in metal, mounting 1 Miniwipp
BodyDrawn aluminium structure. Lamp sup-port consists of a double aluminium ring for gyroscopic adjustment.
Light sourcesLamps with incorporated reflector and GU5.3 socket.
EmissionsDependent on the type of lamp used.
Power supplyThrough the application of electronic transformers fitted inside the product.
ColoursSatin-finish grey, white or metalized bronze.
gyroscopic lamp adjustment rotation of 110
-
290
462
556
650
190
190
190
153
153
153
40
40
40
11 8215
Miniwipp adjustable in metal, mounting 1
Light source Wattage Socket W [kg] Code
AL QR-CB51 250 W GU5.3 2.10 22388.__
Light source Wattage Socket W [kg] Code
AL QR-CB51 350 W GU5.3 2.40 22389.__
Light source Wattage Socket W [kg] Code
AL QR-CB51 450 W GU5.3 2.70 22390.__
IP20integrated electronic control gearlamp photometric data - see page 542
IP20integrated electronic control gearlamp photometric data - see page 542
IP20integrated electronic control gearlamp photometric data - see page 542
-
291
design: Martini Staff
recessed, adjustable in metal Miniwipp
BodySheet steel structure with visible frame. Lamp support consists of a double alu-minium ring for gyroscopic adjustment.IP20 fixture, IP23 when installed in the visible part.
Light sourcesLamps with incorporated reflector and GU5.3 socket.
EmissionsDependent on the type of lamp used.
Power supplyDirect from the electricity mains by means of electronic transformers.
AccessoriesElectronic ballast, 105 W and 200 W.
ColoursSatin-finish grey, white or metalized bronze.
gyroscopic lamp adjustment
-
292
46
167
35
21
118
108
118
118118
131
131
131
131
90
9090
241
11822835
190
131
118338
34
11 8215
Miniwipp recessed, adjustable in metal
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 50 W GU5.3 0.42 35740.__
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 50 W GU5.3 0.63 35741.__
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 250 W GU5.3 0.83 35742.__
IP23control gear available as an accessorylamp photometric data - see page 542
IP23control gear available as an accessorylamp photometric data - see page 542
IP23control gear available as an accessorylamp photometric data - see page 542
accessories
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
electronic transformer 105 W 230/240 V 50/60 Hz.code 4.94094.81
Plasterboard drilling
Plasterboard drilling
Plasterboard drilling
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 350 W GU5.3 1.40 35743.__
IP23control gear available as an accessorylamp photometric data - see page 542
Plasterboard drilling
-
293
241
90
241
228228
46
167
35
21
118
108
34
11 8215
recessed, adjustable in metal Miniwipp
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 450 W GU5.3 1.80 35744.__
IP23control gear available as an accessorylamp photometric data - see page 542
Plasterboard drilling
accessories
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
electronic transformer 105 W 230/240 V 50/60 Hz.code 4.94094.81
-
294
Rolo/Minirolo adjustable multi-lamp system
design: Marco Casamonti
Rolo
mounting 1 page 301
floor-standing fixture page 303
pendant page 296 recessed fixture page 306track page 300 ceiling-mounted page 309
-
295
Rolo/Minirolo
The Rolo/Minirolo range consists of fixtures designed and created specifi-cally for the illumination of commercial areas, shops and window displays; the vertical and horizontal adjustability of the lamp assembly makes the fixtures truly unique.
Its movement, which is as complex as that of an astrolabe, makes it possible to illuminate virtually the entire area sur-rounding a fixed point. The range also includes recessed, wall-mounted, ceiling-mounted and track-fit-ted fixtures, pendants and floor lamps.
Minirolo
gyroscopic lamp adjustment
pendant page 310
mounting 1 page 316
track page 313
recessed fixture page 318
-
296
Rolo adjustable pendant
design: Marco Casamonti
Body5 mm thick sheet aluminium structure. Steel cables with terminations allowing the height of the fixture to be adjusted.
Light sourcesHalogen lamps with incorporated reflec-tor.
EmissionsDependent on the type of lamp used.
Power supplyDirect from the electricity mains by means of electronic transformers in-stalled in the product ceiling rose.
AccessoriesSafety glass for AR111 halogen lamps.
ColoursSatin-finish grey.
horizontal pendantvertical pendant
controlled height adjustment
-
297
82
250
250
250
475
50
50
475
475
50
adjustable pendant Rolo
Light source Wattage Socket W [kg] Code
AL AR111 100 W G53 2.00 52010.82
Light source Wattage Socket W [kg] Code
AL AR111 2100 W G53 3.00 52020.82
IP20integrated electronic control gearlamp photometric data - see page 543
IP20integrated electronic control gearlamp photometric data - see page 543
max
. 150
0m
ax. 1
500
accessories
safety glass kit for AR111 lamps code 92080.00
Light source Wattage Socket W [kg] Code
AL AR111 4100 W G53 4.80 52041.82
IP20integrated electronic control gearlamp photometric data - see page 543
max
. 150
0
-
298
82
700
250
475
475
Rolo adjustable pendant
accessories
safety glass kit for AR111 lamps code 92080.00
Light source Wattage Socket W [kg] Code
AL AR111 3100 W G53 8.00 52036.82
Light source Wattage Socket W [kg] Code
AL AR111 4100 W G53 11.0 52046.82
IP20integrated electronic control gearlamp photometric data - see page 543
IP20integrated electronic control gearlamp photometric data - see page 543
max
. 150
0
max
. 150
0
-
299
Rolo
-
300
82
250
190
283
Rolo track pendant
accessories
safety glass kit for AR111 lamps code 92080.00
Light source Wattage Socket W [kg] Code
AL AR111 75 W G53 1.90 35902.82
IP20electronic control gear integrated into the Euro Standard adapterfor electrified tracks, see page 224lamp photometric data - see page 543
-
301
design: Marco Casamonti
mounting 1, adjustable Rolo
BodySheet steel support. 5 mm thick sheet aluminium structure.
Light sourcesHalogen lamps with incorporated reflec-tor.
EmissionsDependent on the type of lamp used.
Power supplyDirect from the electricity mains by means of electronic transformers in-stalled in the product.
AccessoriesSafety glass for AR111 halogen lamps.
ColoursSatin-finish grey.
horizontal installation
vertical installation
-
302
82
250
303 50
475
303 50
700
303 50
Rolo mounting 1, adjustable
Light source Wattage Socket W [kg] Code
AL AR111 100 W G53 1.80 22010.82
Light source Wattage Socket W [kg] Code
AL AR111 2100 W G53 2.50 22020.82
IP20integrated electronic control gearlamp photometric data - see page 543
IP20integrated electronic control gearlamp photometric data - see page 543
accessories
safety glass kit for AR111 lamps code 92080.00
Light source Wattage Socket W [kg] Code
AL AR111 3100 W G53 4.00 22031.82
IP20integrated electronic control gearlamp photometric data - see page 543
-
303
design: Marco Casamonti
floor-standing fixture, adjustable Rolo
BodyExtruded aluminium and sheet steel support. 5 mm thick sheet aluminium structure.
Light sourcesHalogen lamps with incorporated reflec-tor.
EmissionsDependent on the type of lamp used.
Power supplyDirect from the electricity mains by means of electronic transformers in-stalled in the product.
AccessoriesSafety glass for AR111 halogen lamps.
ColoursSatin-finish grey.
fixture head rotation of 90 multiple ignitions
-
304
82
2700
/ 32
00
300 5
500
90 90
Rolo floor-standing fixture, adjustable
Light source Wattage Socket H [mm] W [kg] Code
AL AR111 3100 W G53 2700 23.0 02270.82AL AR111 3100 W G53 3200 26.0 02320.82
IP20integrated electronic control gearlamp photometric data - see page 543
accessories
safety glass kit for AR111 lamps code 92080.00
-
305
Rolo
-
306
design: Marco Casamonti
Rolo recessed and ceiling-mounted, adjustable
BodySheet steel support. 5 mm thick sheet aluminium structure.
Light sourcesHalogen lamps with incorporated reflec-tor and models with fluorescent lamps and opaque diffuser.
EmissionsDependent on the type of lamp used.
Power supplyThrough the application of electronic transformers fitted inside the product or available to purchase separately.
AccessoriesElectronic ballasts, 105 W and 210 W. Safety glass for AR111 halogen lamps.
ColoursSatin-finish grey.
-
307
82
225
450
225
225
39
50
8585
250
250
250
475
212212
212436
675
225
5085
250
700
212662
450
450
50
85
47547
5
436436
recessed, adjustable Rolo
Light source Wattage Socket W [kg] Code
AL AR111 100 W G53 2.00 35910.82
Light source Wattage Socket W [kg] Code
AL AR111 2100 W G53 3.80 35912.82
IP20integrated electronic control gearrecessed fixture for walls or ceilings in masonry or plasterboardlamp photometric data - see page 543
IP20integrated electronic control gearrecessed fixture for walls or ceilings in masonry or plasterboardlamp photometric data - see page 543
Plasterboard drilling
Plasterboard drilling
accessories
safety glass kit for AR111 lamps code 92080.00
Light source Wattage Socket W [kg] Code
AL AR111 3100 W G53 5.50 35913.82
IP20integrated electronic control gearrecessed fixture for walls or ceilings in masonry or plasterboardlamp photometric data - see page 543
Plasterboard drilling
Light source Wattage Socket W [kg] Code
AL AR111 4100 W G53 7.50 35971.82
IP20integrated electronic control gearrecessed fixture for walls or ceilings in masonry or plasterboardlamp photometric data - see page 543
Plasterboard drilling
-
308
82
1170
250
530
125
2121132
46
167
35
21
118
108
8059
5
595
34
Rolo recessed, adjustable
accessories
Light source Voltage Wattage Socket W [kg] Code
AL AR111 * 12 V 2100 W G53 10.8 35977.82FL TC-L ** 55 W 2G11
IP20* control gear available as an accessory** integrated electronic control gearceiling installationlamp photometric data - see page 543
Plasterboard drilling
safety glass kit for AR111 lampscode 92080.00
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
electronic transformer 105 W 230/240 V 50/60 Hz.code 4.94094.81
Light source Wattage Socket W [kg] Code
AL AR111 4100 W G53 10.0 35981.82
IP20integrated electronic control gearlamp photometric data - see page 543
recessed fixture for modular false ceilings 600x600
-
309
82
250
105
250
250
105
475
250
105
700
475
105
475
ceiling-mounted, adjustable Rolo
accessories
safety glass kit for AR111 lamps code 92080.00
Light source Wattage Socket W [kg] Code
AL AR111 50 W G53 3.50 35891.82
Light source Wattage Socket W [kg] Code
AL AR111 250 W G53 4.80 35892.82
IP20integrated electronic control gearlamp photometric data - see page 542
IP20integrated electronic control gearlamp photometric data - see page 542
Light source Wattage Socket W [kg] Code
AL AR111 350 W G53 6.80 35893.82
IP20integrated electronic control gearlamp photometric data - see page 542
Light source Wattage Socket W [kg] Code
AL AR111 450 W G53 8.80 35894.82
IP20integrated electronic control gearlamp photometric data - see page 542
-
310
design: Marco Casamonti
Minirolo pendant, adjustable
Body5 mm thick sheet aluminium structure. Steel cables with terminations allowing the height of the fixture to be adjusted.
Light sourcesDichroic lamp with GU5.3 socket.
EmissionsDependent on the type of lamp used.
Power supplyDirect from the electricity mains by means of electronic transformers in-stalled in the product.
ColoursSatin-finish grey.
horizontal pendantvertical pendant
controlled height adjustment
-
311
82
140
140
140
265
50
50
pendant, adjustable Minirolo
Light source Wattage Socket W [kg] Code
AL QR-CB51 50 W GU5.3 0.80 52111.82
Light source Wattage Socket W [kg] Code
AL QR-CB51 250 W GU5.3 1.00 52121.82
IP20integrated electronic control gearlamp photometric data - see page 542
IP20integrated electronic control gearlamp photometric data - see page 542
max
. 150
0m
ax. 1
500
-
312
82
265
765
390
265
265
140
Minirolo pendant, adjustable
Light source Wattage Socket W [kg] Code
AL QR-CB51 450 W GU5.3 4.00 52146.82
Light source Wattage Socket W [kg] Code
AL QR-CB51 1250 W GU5.3 10.0 52166.82
Light source Wattage Socket W [kg] Code
AL QR-CB51 350 W GU5.3 2.50 52136.82
IP20integrated electronic control gearlamp photometric data - see page 542
IP20integrated electronic control gearlamp photometric data - see page 542
IP20integrated electronic control gearlamp photometric data - see page 542
max
. 150
0
max
. 150
0
max
. 150
0
-
313
82
140
190
173
pendant, track Minirolo
Light source Wattage Socket W [kg] Code
AL QR-CB51 50 W GU5.3 1.20 35908.82
IP20electronic control gear integrated into the Euro Standard adapterfor electrified tracks, see page 224lamp photometric data - see page 542
-
314
-
315
-
316
design: Marco Casamonti
Minirolo mounting 1, adjustable
Body5 mm thick sheet aluminium structure. Sheet steel support.
Light sourcesDichroic lamp with GU5.3 socket.
EmissionsDependent on the type of lamp used.
Power supplyDirect from the electricity mains by means of electronic transformers in-stalled in the product.
ColoursSatin-finish grey.
horizontal installation
vertical installation
-
317
82
140
188 50
265
188 50
390
188 50
mounting 1, adjustable Minirolo
Light source Wattage Socket W [kg] Code
AL QR-CB51 50 W GU5.3 0.60 22111.82
Light source Wattage Socket W [kg] Code
AL QR-CB51 350 W GU5.3 1.50 22131.82
Light source Wattage Socket W [kg] Code
AL QR-CB51 250 W GU5.3 1.00 22121.82
IP20integrated electronic control gearlamp photometric data - see page 542
IP20integrated electronic control gearlamp photometric data - see page 542
IP20integrated electronic control gearlamp photometric data - see page 542
-
318
design: Marco Casamonti
Minirolo recessed, adjustable
BodySheet steel structure. 5 mm thick sheet aluminium support.
Light sourcesDichroic lamps with GU5.3 socket and models with fluorescent lamp and opaque diffuser.
EmissionsDependent on the type of lamp used.
Power supplyThrough the application of electronic transformers fitted inside the product or available to purchase separately.
AccessoriesElectronic ballasts, 105 W and 210 W.
ColoursSatin-finish grey.
horizontal installation
vertical installation
-
319
82
125
250
125
125
45,5
45,5
8585
140
140
140
265
118118
118244
46
167
35
21
118
108
375
125
45,585
140
390
118368
250
250
45,5
85
265
265
244244
34
recessed, adjustable Minirolo
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 50 W GU5.3 0.80 35916.82
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 250 W GU5.3 1.50 35926.82
IP20control gear available as an accessoryrecessed fixture for walls or ceilings in masonry or plasterboardlamp photometric data - see page 542
IP20control gear available as an accessoryrecessed fixture for walls or ceilings in masonry or plasterboardlamp photometric data - see page 542
Plasterboard drilling
accessories
Plasterboard drilling
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
electronic transformer 105 W 230/240 V 50/60 Hz.code 4.94094.81
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 350 W GU5.3 2.50 35936.82
IP20control gear available as an accessoryrecessed fixture for walls or ceilings in masonry or plasterboardlamp photometric data - see page 542
Plasterboard drilling
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 450 W GU5.3 4.00 35946.82
IP20control gear available as an accessoryrecessed fixture for walls or ceilings in masonry or plasterboardlamp photometric data - see page 542
Plasterboard drilling
-
320
82
1010
140
410
125
122988
46
167
35
21
118
108
34
Minirolo recessed, adjustable
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 * 12 V 450 W GU5.3 7.00 35948.82FL TC-L ** 36 W 2G11
IP20* control gear available as an accessory** integrated electromagnetic control gearopaque glass diffuserceiling installationlamp photometric data - see page 542
Plasterboard drilling
accessories
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
electronic transformer 105 W 230/240 V 50/60 Hz.code 4.94094.81
-
321
Rolo/Minirolo
-
322
New
Bex
Saturno
Kono
Deco
Perla
Pico
Pico-Meta
Eco
Slipp
Pico 80 and Pico Pi
Pico 100347
Pico 200349
Pico 290351
Deco332
round 325
square 326
Slipp372
Pico pi381
Pico 80379
fluorescent 345
with frame337
flush-fitted 343
Saturno328
Eco368
Pico-Meta 160 357
Pico-Meta 230 362
Kono330
-
323
New
New
Recessed fixtures
Cico and Cico Pi
Strip
Quadria
Duna
Paper
Ipos
FL
Roof
Venere
Roof408
Cico pi383
Cico 383
Quadria388
Ipos400
AR111 halogen 428
fluorescent 427
Paper394
FL404
square 386
round 385
ceiling-mounted 391
recessed 392
module 600600 431
-
324
330
+90-30
design: Lapo Grassellini
Bex gyroscopic recessed
electrical connection for halogen lamp electrical connection for metal halide lamp
This is an extremely innovative adjust-able recessed fixture. It has three main advantages.Bex offers direction adjustment which is superior to any other product currently available on the market, as it features ver-tical movement between -30 and +90, which means the beam of light may be directed so that it is at a right angle to the surface on which the fixture is installed.Its design remains minimal, as the two vertical and horizontal position locking rings have been integrated into a single component.This elimination of one ring also means that the fixture is very compact.Bex therefore offers complete versatility and may be used in any type of environ-ment, regardless of its style.
BodyDie-cast aluminium fixture and ring, coat-ed in sheet steel and painted black.
Available in round and square versions.
Light sourcesAR111 halogen lamp with incorporated reflector and G53 socket, and CDM-R111 MH lamp with incorporated reflector and GX8.5 socket.
Power supplyBy means of transformers or electronic ballasts.
Accessories105 W and 210 W electronic transform-ers; 35 W and 70 W electronic ballasts.
ColoursSatin-finish grey, white or metalized bronze.
for a wider range, see catalogue
-
325
1
70
145
166
35
21
118
108
32,5
156
163
84
1
70
145
160
160
165
46
167
34
11 15 82
round gyroscopic recessed Bex
Light source Voltage Wattage Socket W [kg] Code
AL AR111 12 V 75 W G53 1.00 30500.__
Light source Wattage Socket W [kg] Code
MH CDM-R111 35/70W GX8.5 1.00 30501.__
accessories
electronic transformer 105 W230/240 V 50-60 Hz. code 4.94094.81
electronic control gear MH 35 W cable L = 300 mmcode 35143.00
electronic control gear MH 70 Wcable L = 300 mmcode 35144.00
Plasterboard drilling
Plasterboard drilling
IP20control gear available as an accessorylamp photometric data - see page 543
IP20control gear available as an accessorylamp photometric data - see page 543
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
-
326
170
145
165
170
170
145
166
170
160
160
35
21
118
108
32,5
156
163
84
46
167
34
11 15 82
Bex square gyroscopic recessed
Light source Voltage Wattage Socket W [kg] Code
AL AR111 12 V 75W G53 1.00 30505.__
Light source Wattage Socket W [kg] Code
MH CDM-R111 35/70W GX8.5 1.00 30506.__
IP20control gear available as an accessorylamp photometric data - see page 543
IP20control gear available as an accessorylamp photometric data - see page 543
Plasterboard drilling
Plasterboard drilling
accessories
electronic transformer 105 W230/240 V 50-60 Hz. code 4.94094.81
electronic control gear MH 35 W cable L = 300 mmcode 35143.00
electronic control gear MH 70 Wcable L = 300 mmcode 35144.00
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
-
327
Bex
-
328
+90330-15
design: Stepan Babian
Saturno gyroscopic recessed
The ability to direct light within a light-ing scheme is becoming an increasingly important requirement and was a major factor in the development of Saturno, a simple and flexible element which can be used in all environments where accent lighting is required.Gyroscopic adjustment means the fixture can be rotated vertically from -15 to +90, and horizontally around 330.This procedure is made easier by the pin fixed to the ring on the body. The limited height of the Saturno product means it can be installed in areas where there is only a small space between the ceiling and the plasterboard.
BodyDie-cast aluminium structure and ring, sheet steel rear cover, harmonic steel springs for installation in false ceilings between 1 and 15 mm thick.
Light sourcesDichroic halogen lamps with incorporated reflector and GU5.3 socket.
Power supplyLow-voltage (12 V).
AccessoriesElectronic transformer.
ColoursSatin-finish grey or white.
pin control for easy position adjustment
wall-mounting lamp compartment rotation
for a wider range, see catalogue
-
329
11 82
35
21
118
108
46
167
125
118
105
34
gyroscopic recessed Saturno
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 50 W GU5.3 0.45 34359.__
accessories
electronic transformer 105 W 230/240 V 50-60 Hz.code 4.94094.81
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
IP20electronic control gear available as an accessorylamp photometric data - see page 542
Plasterboard drilling
-
330
+50
-10 330
1-15
Kono recessed, adjustable
design: Luigi Trenti
BodyDie-cast aluminium body offering vertical and horizontal light beam adjustment. Installation in false ceilings is extremely simple, thanks to the spring fixing which can adapt to sheets between 1 mm and 15 mm thick. Slits on the rear part of the fixture allow the heat produced by the lamp compartment to disperse. The spe-cial black silicone comb gasket makes it impossible to see the area behind the false ceiling.IP20 fixture, IP23 when installed in the visible part.
Light sourcesG12 single-cap metal halide lamps and AR111 halogen lamp with incorporated reflector and G53 socket.
EmissionsOption of choosing either the narrow-beam or the medium-beam version.
Power supplyBy means of transformers or electronic ballasts.
Accessories105 W and 210 W electronic transform-ers; 35 W and 70 W electronic ballasts.
ColoursSatin-finish grey or white.
wall installation heat dispersal
vertical and horizon-tal rotation of the lamp compartment
false ceiling thickness of 1 - 15 mm
-
331
11 82
70W
MHG12
70W
MHG12
8432
,5
163
156
7740
190
150
89
197
190
210
197
190
210
35
21
118
108
46
167
34
recessed, adjustable Kono
Light source Wattage Socket Optic W [kg] Code
MH 35/70/150 W G12 S 1.10 35133.__MH 35/70/150 W G12 F 1.10 35130.__
Light source Voltage Wattage Socket W [kg] Code
AL AR111 12V 100W G53 1.10 35138.__
electronic control gear cable L = 300 mm 35 W code 35143.00 70 W code 35144.00
electronic control gear 150 Wcable L = 300 mm code 35145.00
IP23control gear available as an accessory
IP23control gear available as an accessorylamp photometric data - see page 543
Plasterboard drilling
Plasterboard drilling
accessories
electronic transformer 105 W 230/240 V 50-60 Hz.code 4.94094.81
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
-
332
6540
design: Martini Staff
Deco recessed ceiling mounting
BodySheet steel structure painted black, with visible frame. Harmonic steel fixing springs for quick installation without the aid of tools.IP20 fixture, IP23/IP44 when installed in the visible part except in the specified cases.
Light sourcesLow-voltage dichroic halogen lamp wth GU5.3 socket; PAR16 mains voltage lamp and lamp with GU4 socket.
EmissionsDependent on the light beam openings of the sources used.
Power supplyAt mains voltage in the PAR16 lamp model; by means of transformers (avail-able to purchase separately) in the low-voltage dichroic lamp version.
AccessoriesTransformer for models with 12 V lamp and formwork for concrete.
ColoursBlack structure and satin-finish grey vis-ible frame.
-
333
82
63
84 62
70
85
50
35
21
118
108
46
167
140200
90
34
35W - 36
QR-CB51GU5,3
35W - 36
QR-CB51GU5,3
70
63
84
85
recessed ceiling mounting Deco
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 50 W GU5.3 0.50 35805.82
Light source Wattage Socket W [kg] Code
AL PAR16 50 W GZ10 0.50 35806.82
Plasterboard drilling
IP23control gear available as an accessorylamp photometric data - see page 542
IP23lamp photometric data - see page 542
accessories
housing for concrete code 35808.00
electronic transformer 105 W230/240 V 50/60 Hz. code 4.94094.81
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
Plasterboard drilling
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 crystal 12V 35 W GU5.3 0.50 35807.82AL QR-CB51 sanded glass 12V 35 W GU5.3 0.50 35809.82
IP44 control gear available as an accessory
crystal sanded glass
-
334
82
20W
QT-9G4
35W - 36
QR-CB51GU5,3
35W - 36
QR-CB51GU5,3
7070
7070
45
65
8484 62
7070
85
65
8484
85
50
35
21
118
108
46
167
8484
140200
160180
9050
34
accessories
Light source Voltage Wattage Socket W [kg] Code
AL QT-9 12 V 20 W G4 0.50 35810.82
Plasterboard drilling
Plasterboard drilling
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 50 W GU5.3 0.50 35800.82
Light source Wattage Socket W [kg] Code
AL PAR16 50 W GZ10 0.50 35801.82
Plasterboard drilling
IP23 control gear available as an accessorylamp photometric data - see page 542
IP44 control gear available as an accessory
IP23 lamp photometric data - see page 542
housing for concrete, for fixtures 35800 and 35801 code 35803.00
housing for concrete, for fixture 35810code 35817.00
electronic transformer 105 W230/240 V 50/60 Hz. code 4.94094.81
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 crystal 12V 35 W GU5.3 0.50 35813.82AL QR-CB51 sanded glass 12V 35 W GU5.3 0.50 35815.82
IP44 control gear available as an accessory
crystal sanded glass
Deco recessed ceiling mounting
-
335
82
50W - 10
QR-CB51GU5,3
50W - 36
QR-CB51GU5,3
50W - 24
QR-CB51GU5,3
50W - 60
QR-CB51GU5,3
84
8490
65
7070
35
21
118
108
46
167
84
7070
40
8490
140200
90
34
accessories
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB35 12 V 35W GU4 0.50 35812.82
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 50 W GU5.3 0.50 35814.82
Plasterboard drilling
IP23 control gear available as an accessory
IP23 control gear available as an accessorylamp photometric data - see page 542
housing for concrete code 35803.00
electronic transformer 105 W230/240 V 50/60 Hz. code 4.94094.81
electronic transformer 210 W230/240 V 50-60 Hz. code 4.94095.00
Plasterboard drilling
recessed ceiling mounting Deco
-
336
design: Giampiero Peia
Perla recessed with frame
BodyThe structural element and the low-luminance reflector are made using alu-minium. The frontal ring for halogen and metal halide lamps is made using PPS plastic, which is able to withstand high temperatures.IP20 fixture, IP23 when installed in the visible part and IP43 when safety glass fitted.
Light sourcesAR-111 halogen lamp with integrated re-flector.CDM-R111 metal halide lamp with inte-grated reflector.TC-DE compact fluorescent lamp.
Power supplyDirect voltage with ballasts for fluorescent lamps, and without ballasts (accessories) for halogen and metal halide lamps.
AccessoriesFor Perla with halogen and metal halide lamps, filter adapter and 3 mm spacers kit for 9 mm thick plasterboard.
ColoursSatin-finish grey or white decorative rings.
for a wider range, see catalogue
-
337
11 20 27
150
210
108
160
110
165
recessed with frame Perla
decorative round ring for Perla 105 ( 122)code 93444.11code 93444.82
decorative round ring for Perla 160 ( 200)code 93440.11code 93440.82
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 50 W GU5.3 1.00 30545.__Compulsory decorative ring 9344_.__
Light source Voltage Wattage Socket W [kg] Code
AL AR111 12 V 75 W G53 1.60 30510.__Compulsory decorative ring 9344_.__
Light source Wattage Socket W [kg] Code
MH PAR16 20 W GX10 1.00 30546.__Compulsory decorative ring 9344_.__
Light source Wattage Socket W [kg] Code
MH CDM-R111 35/70 W GX8.5 1.60 30511.__Compulsory decorative ring 9344_.__
accessories
Plasterboard drilling
Plasterboard drilling
decorative square ring for Perla 160 (205x205 mm)code 93441.11code 93441.82
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 542
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 543
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 543
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 543
decorative square ring for Perla 105 (122x122 mm)code 93445.11code 93445.82
-
338
11 82
170
107
107
115115
Perla recessed with frame
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 50 W GU5.3 1.00 30552.11
Light source Wattage Socket W [kg] Code
MH PAR16 20 W GX10 1.00 30553.11
Light source Wattage Socket W [kg] Code
MH PAR16 20 W GX10 1.00 30555.11
Light source Wattage Socket W [kg] Code
MH PAR16 20 W GX10 1.00 30555.82
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 542
white body with white frame
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 543
white body with white frame
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 542
black body with white frame
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 543
black body with white frame
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 542
black body with grey frame
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 543
black body with grey frame
Plasterboard drillingLight source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 50 W GU5.3 1.00 30554.11
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 50 W GU5.3 1.00 30554.82
-
339
11 82
210
165
165
175175
recessed with frame Perla
Plasterboard drilling
Light source Voltage Wattage Socket W [kg] Code
AL AR111 12 V 75 W G53 1.60 30562.11
Light source Wattage Socket W [kg] Code
MH CDM-R111 35/70 W GX8.5 1.60 30563.11
Light source Wattage Socket W [kg] Code
MH CDM-R111 35/70 W GX8.5 1.60 30565.11
Light source Wattage Socket W [kg] Code
MH CDM-R111 35/70 W GX8.5 1.60 30565.82
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 543
white body with white frame
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 543
white body with white frame
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 543
black body with white frame
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 543
black body with white frame
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 543
black body with grey frame
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 340lamp photometric data - see page 543
black body with grey frame
Light source Voltage Wattage Socket W [kg] Code
AL AR111 12 V 75 W G53 1.60 30564.11
Light source Voltage Wattage Socket W [kg] Code
AL AR111 12 V 75 W G53 1.60 30564.82
-
340
35
21
118
108
32,5
156
163
84
3544
190
Perla accessories
electronic transformer 105 W230/240 V 50/60 Hz. code 4.94094.81
electronic transformer MH 20 W230/240 V 50/60 Hz. code 35149.00
*IR/UV filter90 code 92153.00140 code 92163.00
*prismatic refractor90 code 92154.00140 code 92164.00
filter support90 code 92180.27140 code 92181.27
*baffle90 code 92156.27140 code 92166.27
*refractor for ellipti-cal projection90 code 92155.00140 code 92165.00
*The accessory must be fitted us-ing a filter support, code 92180.27 - 92181.27.
* yellow filter 90 code 92150.00140 code 92160.00
* blue filter 90 code 92152.00140 code 92162.00
* red filter 90 code 92151.00140 code 92161.00
* transparent tem-pered glass90 code 92159.00140 code 92169.00
electronic control gear MH 35 W cable L = 300 mmcode 35143.00
electronic control gear MH 70 Wcable L = 300 mmcode 35144.00
cover for front ring Perla 105code 93446.11
cover for front ring Perla 160code 93447.11
-
341
Perla
-
342
design: Giampiero Peia
Perla flush-fitted recessed
BodyThe structural element and the low-luminance reflector are made using alu-minium. The frontal ring for halogen and metal halide lamps is made using PPS plastic, which is able to withstand high temperatures.Fixtures are supplied with sheet steel formwork and spacers for installation in 12 mm and 15 mm thick false ceilings.IP20 fixture, IP23 when installed in the visible part and IP43 when safety glass fitted.
Light sourcesAR-111 halogen lamp with integrated reflector.CDM-R111 metal halide lamp with inte-grated reflector.TC-DE compact fluorescent lamp.
Power supplyDirect voltage with ballasts for fluorescent lamps, and without ballasts (accessories) for halogen and metal halide lamps.
AccessoriesFor Perla with halogen and metal halide lamps, filter adapter and 3 mm spacers kit for 9 mm thick plasterboard. For fluores-cent Perla, transparent and partially sand-blasted safety glass.
ColoursPerla round: white, metallic or black.Perla square: white or black.Perla with fluorescent lamp: metallic.
for a wider range, see catalogue
-
343
11 20 27
11 27
150
210
210
165
170
107
108
160
165
107
115
165
115115
175175
flush-fitted recessed Perla
3 mm spacers kit for 9 mm thick plasterboardPerla 105 round code 92201.00 Perla 160 round code 92203.00
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 50 W GU5.3 1.00 30540.__
Light source Voltage Wattage Socket W [kg] Code
AL AR111 12 V 75 W G53 1.00 30515.__
Light source Voltage Wattage Socket W [kg] Code
AL QR-CB51 12 V 50 W GU5.3 1.00 30550.__
Light source Voltage Wattage Socket W [kg] Code
AL AR111 12 V 75 W G53 1.00 30560.__
Light source Wattage Socket W [kg] Code
MH PAR16 20 W GX10 1.00 30541.__
Light source Wattage Socket W [kg] Code
MH CDM-R111 35/70 W GX8.5 1.00 30516.__
Light source Wattage Socket W [kg] Code
MH PAR16 20 W GX10 1.00 30551.__
Light source Wattage Socket W [kg] Code
MH CDM-R111 35/70 W GX8.5 1.00 30561.__
plasterboard accessories
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 344lamp photometric data - see page 542
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 344lamp photometric data - see page 543
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 344lamp photometric data - see page 542
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 344lamp photometric data - see page 543
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 344lamp photometric data - see page 543
Plasterboard drilling
Plasterboard drilling
Plasterboard drilling
Plasterboard drilling
3 mm spacers kit for 9 mm thick plasterboardPerla 105 square code 92202.00Perla 160 square code 92204.00
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 344lamp photometric data - see page 543
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 344lamp photometric data - see page 543
IP23
IP43 when used in conjunction with glass accessorieselectronic control gear available as an accessory see page 344lamp photometric data - see page 543
-
344
35
21
118
108
32,5
156
163
8435
44
190
1
5
2
6
3
7
4
Perla accessories
electronic transformer 105 W230/240 V 50/60 Hz. code 4.94094.81
electronic transformer MH 20 W230/240 V 50/60 Hz. code 35149.00
*IR/UV filter90 code 92153.00140 code 92163.00
*prismatic refractor90 code 92154.00140 code 92164.00
filter support90 code 92180.27140 code 92181.27
*baffle90 code 92156.27140 code 92166.27
*refractor for ellipti-cal projection90 code 92155.00140 code 92165.00
*The accessory must be fitted us-ing a filter support, code 92180.27 - 92181.27.
*yellow filter 90 code 92150.00140 code 92160.00
*blue filter 90 code 92152.00140 code 92162.00
*red filter 90 code 92151.00140 code 92161.00
*transparent tem-pered glass90 code 92159.00140 code 92169.00
electronic control gear MH 35 W cable L = 300 mmcode 35143.00
electronic control gear MH 70 Wcable L = 300 mmcode 35144.00
cover for front ring Perla 105code 93446.11
cover for front ring Perla 160code 93447.11
installation sequence
1- plasterboard cutting and drilling2- insertion of the housing3- securing the housing with screws4- connection to the mains power supply5- insertion of the fixture with the springs rotated by 1806- filling and screeding of the wall7- installation completed
-
345
20
2x18W
TC-DEG24q-2
2x26W
TC-DEG24q-3
8-15
112
310
210
215
flush-fitted recessed fluorescent Perla
Light source Wattage Socket W [kg] Code
AL TC-DE 218 W G24q-2 1.60 30520.20AL TC-DE 226 W G24q-3 1.60 30525.20
Light source Wattage Socket W [kg] Code
AL TC-DE 218 W G24q-2 1.60 30521.20AL TC-DE 226 W G24q-3 1.60 30526.20
Light source Wattage Socket W [kg] Code
AL TC-DE 218 W G24q-2 1.60 30522.20AL TC-DE 226 W G24q-3 1.60 30527.20
Light source Wattage Socket W [kg] Code
AL TC-DE 218 W G24q-2 1.60 30523.20AL TC-DE 226 W G24q-3 1.60 30528.20
IP23
IP43 when used in conjunction with glass accessoriesintegrated electronic control gear
IP23
IP43 when used in conjunction with glass accessoriesintegrated electronic control gearfixture with analogue dimmer 1-10 V
IP23
IP43 when used in conjunction with glass accessoriesintegrated electronic control gearDALI dimmer fixture (functional earthing)
IP23
IP43 when used in conjunction with glass accessoriesintegrated electronic control gearfixture with 1-hour continuous emergency service
Plasterboard drilling
accessories
partially sanded glasscode 93443.00
transparent glasscode 93442.00
3 mm spacers kitfor 9 mm thick plasterboardcode 92205.00
-
346
design: Emanuele Nicosia, Anna Visconti
Pico 100 recessed
BodyPainted steel and galvanised metal struc-ture. Circular or square glass rings. Fixture installed from below, without the use of tools. IP20 fixture, IP23 when installed in the visible part.
Light sourcesSingle-cap halogen lamps with incorpo-rated reflector.
EmissionsDependent on the type of lamp and beam selected.
Power supplyDirect from the electricity mains or by means of electromagnetic control gear for metal halide lamps.
AccessoriesElectromagnetic control gear unit for 35 W metal halide lamp.
ColoursDecorative glass rings in colours: acid-treated white, aquamarine green, opal-escent blue.
Pico 100 round Pico 100 square
-
347
100
100
89
89
135
135
252
47
68
recessed Pico 100
Light source Wattage Socket W [kg] Code
AL PAR20 50 W E27 0.22 38260.00Compulsory decorative ring 9310_.__
Light source Wattage Socket W [kg] Code
MH PAR20 35 W E27 0.60 38261.00Control gear unit 38265.00Compulsory decorative ring 9310_.__
Plasterboard drilling
Plasterboard drilling
accessories
square glass ringsacid-treated whitecode 93101.96
square glass ringsaquamarine greencode 93101.33
square glass ringsopalescent blue code 93101.78
electromagnetic control gear unit 35 Wcode 38265.00
IP23decorative ring to be ordered separatelylamp photometric data - see page 542
IP23decorative ring and control gear unit to be ordered separatelylamp photometric data - see page 543
round glass ringsacid-treated whitecode 93100.96
round glass ringsopalescent bluecode 93100.78
round glass ringsaquamarine greencode 93100.33
-
348
1 -
50
design: Emanuele Nicosia, Anna Visconti
Pico 200 recessed
BodyPainted steel and galvanised metal struc-ture. Aluminium reflectors which guar-antee the elimination of all iridescent effects and offer optimal light distribution control.Fixture installed from below, without the use of tools. Two-pronged fixing brack-ets, suitable for ceilings from 1 to 50 mm thick. IP20 fixture, IP23 when installed in the visible part except in the specified cases.
Light sourcesCompact fluorescent lamps, 18 W and 26 W.160 W double-cap halogen lamps.
EmissionsDependent on the type of lamp and reflector model used.
Power supplyModels with electromagnetic, electronic and mains-powered control gear avail-able.
AccessoriesSafety glass for IP44 protection degree, in various finishes: transparent, screen printed, partially acid-treated and acid-treated.Metal formwork for installation in con-crete.
ColoursDecorative glass rings in colours: acid-treated white, aquamarine green, opal-escent blue.
false ceiling thickness of 1 - 50 mm
decorative round ring
-
349
160W
QT-DE12R7s
18W
TC-TGX24d-2
26W
TC-TEGX24q-2
200
185
185
120
200
215
185
215
55
457332
230
recessed Pico 200
Light source Wattage Socket W [kg] Code
AL QT-DE12 160 W R7s 0.90 34322.00Compulsory decorative ring 93200.__Compulsory safety glass 920__.__
Plasterboard drilling
accessories
IP44 decorative ring and safety glass to be ordered separately - see page 350
Pico 200120
Light source Wattage Socket W [kg] Code
FL TC-T 18 W GX24d-2 1.60 38200.00FL TC-T 26 W GX24d-3 1.60 38201.00Compulsory decorative ring 93200.__
Light source Wattage Socket W [kg] Code
FL TC-TE 26 W GX24q-3 1.60 38203.00Compulsory decorative ring 93200.__
Plasterboard drilling
IP23 IP44 when safety glass fittedintegrated electromagnetic control geardecorative ring to be ordered separately - see page 350only use Osram TC-T lamps
Pico 200190
IP23 IP44 when safety glass fittedintegrated electronic control geardecorative ring to be ordered separately - see page 350only use Osram TC-TE lamps
Pico 200190
housing for concrete, for fixtures 34322, 38200 and 38201 onlycode 38560.00
-
350
Pico 200 accessories
round glass ringsacid-treated whitecode 93200.96
round glass ringsopalescent bluecode 93200.78
safety glasstransparentcode 92011.00
safety glasssandedcode 92017.00
round glass ringsaquamarine greencode 93200.33
safety glasspartially sandedcode 92015.00
safety glassscreen printedcode 92012.00
-
351
1 -
50
recessed Pico 290
design: Emanuele Nicosia, Anna Visconti
BodyPainted steel and galvanised metal struc-ture. Aluminium or class V0 self-extin-guishing polycarbonate reflectors with high vacuum metal plating treatment.Fixture installed from below, without the use of tools. Three-pronged fixing brack-ets, suitable for ceilings from 1 to 50 mm thick. IP20 fixture, IP23 when installed in the visible part.
Light sourcesCompact fluorescent lamps.
EmissionsDependent on the type of lamp and reflector model used.
Power supplyModels with electromagnetic and elec-tronic control gear available. In fluores-cent lamp versions, fixtures set up for 1-hour continous emergency service are available.
AccessoriesSafety glass for IP44 protection degree, in various finishes: transparent, screen printed, partially sandblasted and sand-blasted.Metal formwork for installation in mason-ry and concrete ceilings. Emergency control gear kit.
ColoursDecorative glass rings in colours: acid-treated white, aquamarine green, opal-escent blue.
false ceiling thickness of 1 - 50 mm
decorative round ring
-
352
2x26W
TC-DG24d-3
26W
TC-DG24d-3
3x26W
TC-DG24d-3
542362
175
290
245
265
110
80
125
215
5512
5
Pico 290 recessed
Light source Wattage Socket W [kg] Code
FL TC-D 226 W G24d-3 2.80 38102.00FL TC-D 326 W G24d-3 3.30 38103.00Compulsory decorative ring 93290.__
Light source Wattage Socket W [kg] Code
FL TC-D 26 W G24d-3 2.80 38152.00FL TC-DE 26 W G24q-3Compulsory decorative ring 93290.__Compulsory emergency unit 34591.00
accessories
housing for concrete, for fixtures 38102, 38103code 38580.00
emergency unit 18/26 Wcable L=300 mmcode 34591.00
IP23 IP44 when safety glass fittedintegrated electromagnetic control geardecorative ring to be ordered separately - see page 353
Pico 290100
IP23 IP44 when safety glass fittedintegrated electromagnetic control geardecorative ring to be ordered separately - see page 353fixture with 1-hour continuous emergency service
Pico 290100
Plasterboard drilling
-
353
26W
TC-DG24d-3
2x26W
TC-DEG24q-3
3x26W
TC-DEG24q-3
542362
175
290
245
265
110
80
125
recessed Pico 290
decorative glass ringacid-treated whitecode 93290.96
decorative glass ringopalescent bluecode 93290.78
safety glasstransparentcode 92041.00
safety glasssandedcode 92047.00
decorative glass ringaquamarine greencode 93290.33
housing for concrete, for fixture 38502 onlycode 38580.00
safety glasspartially sandedcode 92045.00
safety glassscreen printedcode 92042.00
accessories
Light source Wattage Socket W [kg] Code
FL TC-D 226 W G24d-3 3.30 38153.00FL TC-DE 26 W G24q-3Compulsory decorative ring 93290.__Compulsory emergency unit 34591.00
Light source Wattage Socket W [kg] Code
FL TC-DE 226 W G24q-3 2.00 38502.00FL TC-DE 326 W G24q-3 3.80 38503.00Compulsory decorative ring 93290.__
IP23 IP44 when safety glass fittedintegrated electromagnetic control geardecorative ring to be ordered separatelyfixture with 1-hour continuous emergency service
Pico 290100
IP23 IP44 when safety glass fittedintegrated electronic control geardecorative ring to be ordered separately
Pico 290100
Plasterboard drilling
emergency unit 18/26 Wcable L=300 mmcode 34591.00
-
354
-
355
-
356
1 -
50
design: Emanuele Nicosia, Anna Visconti
Pico Meta 160/230 recessed
BodyPainted steel and galvanised metal struc-ture. Aluminium or class V0 self-extin-guishing polycarbonate reflectors with high vacuum metal plating treatment. Fixture installed from below, without the use of tools. Two-pronged fixing brack-ets, suitable for ceilings from 1 to 50 mm thick. IP20 fixture, IP23 when installed in the visible part except in the specified cases.
Light sourcesCompact fluorescent lamps in single-lamp and two-lamp configurations. Halogen lamps with various types of socket. Metal halide lamps in single-cap and double-cap version.
EmissionsDependent on the type of lamp and reflector model used. Available with Wall-Washer optic and controlled luminance reflectors in the fluorescent versions, for application in spaces where VDUs are used.
Power supplyElectromagnetic and electronic control gear is supplied with the fixture.In fluorescent lamp versions, fixtures set up for 1-hour continous emergency service are available.
AccessoriesSafety glass for IP44 protection degree, in various finishes: transparent, screen printed, partially sandblasted and sand-blasted.Formwork for concrete is available for various models.
ColoursDecorative glass rings in colours: acid-treated white, aquamarine green and opalescent blue. Metal versions are avail-able in satin-finish grey or white colours.
Pico Meta 160 Pico Meta 230
decorative glass ringdecorative metal ring (Meta)
decorative square glass ring
false ceiling thickness of 1 - 50 mm
-
357
70W
MHG12
70W
MHG12
70W
QT-15B15d
160
240
145
95
120
160
240
145
145 17
0
160
145
145 17
0
457332
175
recessed Pico Meta 160
Light source Wattage Socket W [kg] Code
MH 35/70/150 W G12 0.80 34332.00Compulsory decorative ring 9316_.__Compulsory safety glass 9200_.00
Plasterboard drilling
IP44 control gear available as an accessory - see page 360for accessories, see page 360
Pico-Meta 160 x95
Light source Wattage Socket W [kg] Code
MH 35/70/150 W G12 0.80 34330.00Compulsory decorative ring 9316_.__Compulsory safety glass 9200_.00
IP44 control gear available as an accessory - see page 360for accessories, see page 360
Pico-Meta 160 x145
Plasterboard drilling
Light source Wattage Socket W [kg] Code
AL QT-15 70 W B15d 0.80 34334.00Compulsory decorative ring 9316_.__
IP23 IP44 when safety glass fittedfor accessories, see page 360
Pico-Meta 160 x145
Plasterboard drilling
accessories
housing for concrete, for fixture 34334 onlycode 38555.00
-
358
13W
TC-DG24d-1
18W
TC-TGX24d-2
160
215
145
55
185
160
457332
175
215
5512
5
Pico Meta 160 recessed
accessories
Light source Wattage Socket W [kg] Code
FL TC-D 13 W G24d-1 1.20 34380.00FL TC-T 18 W GX24d-2 1.20 34381.00Compulsory decorative ring 9316_.__
Light source Wattage Socket W [kg] Code
FL TC-DE 13 W G24q-1 1.10 34383.00Compulsory decorative ring 9316_.__Compulsory emergency unit 34590.00
Plasterboard drilling
IP23
IP44 when safety glass fittedintegrated electromagnetic control gearfor accessories, see page 360only use Osram TC-T lamps
Pico-Meta 160 x160
IP23
IP44 when safety glass fittedintegrated electromagnetic control gearfixture with 1-hour continuous emergency servicefor accessories, see page 360
Pico-Meta 160 x160
housing for concrete, for fixtures 34380 and 34381 onlycode 38555.00
emergency unit 13 Wcable L=300 mmcode 34590.00
Light source Wattage Socket W [kg] Code
FL TC-DE 13 W G24q-1 1.10 34384.00FL TC-TE 18 W GX24q-2 1.10 34382.00Compulsory decorative ring 9316_.__
IP23
IP44 when safety glass fittedintegrated electronic control gearonly use Osram TC-TE lampsfor accessories, see page 360
Pico Meta 160 x160
-
359
50W
PAR20E27
18W
TC-ELE27
160
145
185
160
160
145
200
recessed Pico Meta 160
Light source Wattage Socket W [kg] Code
AL PAR20 50W E27 1.20 34388.00Compulsory decorative ring 9316_.__
Plasterboard drilling
IP23
IP44 when safety glass fittedfor accessories, see page 360
Pico-Meta 160 x160
Light source Wattage Socket W [kg] Code
FL TC-EL 18 W E27 1.20 34386.00Compulsory decorative ring 9316_.__
Plasterboard drilling
IP23
IP44 when safety glass fittedonly use Osram TC-EL lampsfor accessories, see page 360
Pico-Meta 160 x200
-
360
8432
,5
163
156
77
40
190
150
89
Pico Meta 160 accessories
electronic control gearMH 35 W code 35143.00
electronic control gearMH 70 W code 35144.00
electronic control gearMH150W code 35145.00
round glass ringsacid-treated whitecode 93160.96
round glass ringsopal bluecode 93160.78
square glass ringsacid-treated whitecode 93161.96
metal ringssatin-finish greycode 93165.82
square glass ringsaquamarine greencode 93161.33
round glass ringsaquamarine greencode 93160.33
metal ringsopaque whitecode 93165.11
square glass ringsopal blue code 93161.78
safety glasstransparentcode 92001.00
safety glasssandedcode 92007.00
safety glasspartially sandedcode 92005.00
safety glassscreen printedcode 92002.00
-
361
Pico Meta
-
362
2x26W
TC-DG24d-3
230
215
205
110
55
85
Pico Meta 230 recessed
Light source Wattage Socket W [kg] Code
FL TC-D 213 W G24d-1 2.00 34311.00FL TC-D 218 W G24d-2 2.00 34312.00FL TC-D 226 W G24d-3 2.10 34313.00Compulsory decorative ring 9323_.__
IP23
IP44 when safety glass fittedintegrated electromagnetic control gearfor accessories, see page 366
Pico Meta 230 x85Plasterboard drilling
Light source Wattage Socket W [kg] Code
FL TC-DE 213 W G24q-1 1.90 38611.00FL TC-DE 218 W G24q-2 1.90 38612.00FL TC-DE 226 W G24q-3 1.90 38613.00Compulsory decorative ring 9323_.__
IP23
IP44 when safety glass fittedintegrated electronic control gearfor accessories, see page 366
Pico Meta 230x85
Light source Wattage Socket W [kg] Code
FL TC-DE 226 W G24q-3 1.90 38622.00Compulsory decorative ring 9323_.__
IP23 IP44 when safety glass fittedintegrated electronic control gearfixture with analogue dimmer, 1-10 Vfor accessories, see page 366
Pico Meta 230x85
-
363
26W
TC-DG24d-3
215
5512
5
230
215
205
110
55
85
recessed Pico Meta 230
accessories
emergency unit 13 Wcable L=300 mmcode 34590.00
emergency unit 18 W/26 Wcable L=300 mmcode 34591.00
Light source Wattage Socket W [kg] Code
FL TC-D 13 W G24d-1 2.00 34362.00FL TC-DE 13 W G24q-1 2.00Compulsory decorative ring 9323_.__Compulsory emergency unit 34590.00
FL TC-D 18 W G24d-2 2.00 34363.00FL TC-DE 18 W G24q-2 2.00FL TC-D 26 W G24d-3 2.00 34369.00FL TC-DE 26 W G24q-3 2.00Compulsory decorative ring 9323_.__Compulsory emergency unit 34591.00
IP23
IP44 when safety glass fittedintegrated electromagnetic control gearfixture with 1-hour continuous emergency servicefor accessories, see page 366
Pico Meta 230 x85
Plasterboard drilling
-
364
2x26W
TC-DEG24q-3
457332
542x362
175
175
230
215
205
135
55
110
Pico Meta 230 recessed
accessories
housing for concrete, for fixtures 34308, 34309, 38608 and 38609 onlycode 38565.00
housing for concrete, for fixtures 34310 and 38610 onlycode 38575.00
darklight screen, for use with metal decora-tive ring 93235.82 and 93235.11 onlycode 93236.00
Light source Wattage Socket W [kg] Code
FL TC-D 213 W G24d-1 2.00 34308.00FL TC-D 218 W G24d-2 2.00 34309.00FL TC-D 226 W G24d-3 2.10 34310.00Compulsory decorative ring 9323_.__
IP23
IP44 when safety glass fittedintegrated electromagnetic control gearfor accessories, see page 366
Pico Meta 230 x110
Light source Wattage Socket W [kg] Code
FL TC-DE 213 W G24q-1 1.90 38608.00FL TC-DE 218 W G24q-2 1.90 38609.00FL TC-DE 226 W G24q-3 2.00 38610.00Compulsory decorative ring 9323_.__
IP23
IP44 when safety glass fittedintegrated electronic control gearfor accessories, see page 366
Pico Meta 230 x110
Plasterboard drilling
-
365
70W
MHG12
26W
TC-DEG24q-3
26W
TC-DG24d-3
230
270
205
135
160
457332
230
230
215
205
135
160
55
recessed wall-washer Pico Meta 230
Light source Wattage Socket W [kg] Code
MH 35/70/150 W G12 1.80 38225.00Compulsory decorative ring 93235.__Compulsory safety glass 92___.__
IP44 decorative ring to be ordered separatelycontrol gear available as an accessory - see page 366for accessories, see page 366
Pico Meta 230 x170 Plasterboard drilling
accessories
housing for concrete, for fixture 38220 onlycode 38570.00
Light source Wattage Socket W [kg] Code
FL TC-DE 26 W G24q-3 1.70 38221.00Compulsory decorative ring 93235.__
IP23 IP44 when safety glass fitted integrated electronic control gearfor accessories, see page 366
Pico Meta 230 x170
Plasterboard drilling
Light source Wattage Socket W [kg] Code
FL TC-D 26 W G24d-3 1.80 38220.00Compulsory decorative ring 93235.__
IP23
IP44 when safety glass fittedintegrated electromagneti