marketed and distributed by: absolute distribution, inc...
TRANSCRIPT
A
lum
inu
m R
aili
ng
an
d C
able
Sys
tem
AS&
D™
*Asterisk denotes NON STOCK special order. Please contact ADI customer service.134
Marketed and Distributed by: Absolute Distribution, Inc.
134
Marketed and Distributed by: Absolute Distribution, Inc.
ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERS
AS&D™ Aluminum Rail with Cable
Rail Guidelines To comply with engineering and testing posts must be spaced no more than 50” on center. Cables are spaced at
” on center to eep the cable rom de ecting beyond ” to meet code. Two posts are re uired to create a 90 degree corner and/or a 45 degree turn. Cable can either terminate at the corner or run continuously through a single corner. Top rail is re uired or all railing installations.
PostsAS&D™ posts for level railings are all pre-drilled and ready for cable installation. Posts for stairs come undrilled to ma imi e installation e ibility which allow the post to accommodate any stair application. All posts are available for surface mount or fascia mount and available for 36” and/or 42” rail heights.
Top RailsThere are 3 styles of top rail that AS&D™ railing utilizes: Series 200 is a contemporary at top rail most often used for level applications. Can be used for stairs with the addition of a secondary handrail system.Series 100 has a rounded pro le that uali es as a graspable rail and is most commonly used for stairs.Series 400 is a at top rail that is designed to accept a wood or composite cap rail.
Available Colors:
Double Posts for Corners Over-the-Post
Top Rail
Pre-Drilled End Post
Pre-Drilled Intermediate Post
3-3/16”Cable
Spacing
48” Maximum Between Posts
Rail Overviewanufactured in the SA using aircraft grade aluminum AS&D™ Aluminum ail and Cable System has been
designed engineered and tested speci cally for use with cable and is approved in all 50 states. The aluminum framewor and stainless steel cable allows for railings to be lightweight while still retaining e ceptional durability.
ailings will not rust rot warp or split and re uire minimal user maintenance.
Anodized (Silver) Black Bronze White
Colors shown are approximate representation
AS&D™ Railing System Overview
Alu
min
um
Rai
lin
g a
nd
Cab
le S
yste
m
A
S&D
™
*Asterisk denotes NON STOCK special order. Please contact ADI customer service. 135
Marketed and Distributed by: Absolute Distribution, Inc.
135
Marketed and Distributed by: Absolute Distribution, Inc.
ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERSAS&D™ - Aluminum Rail System for Cable Railing
Cable Railing Kits for Aluminum RailOutside of Post to Outside of Post Rail Kit - AluminumRail System for 2-3/8” Posts
Sold in kits.Cable railing kit, made in USA from 1/8” high quality 316 grade stainless steel. Includes 1 strand of cable w/swage, applicable washers, Invisiware® receiver, Pull-Lock™ end fitting and end cap. Minimum 3” clearance between end post and structure is required.
Item #: 22405Item #: 22410Item #: 22415Item #: 22420Item #: 22425Item #: 22430Item #: 22440Item #: 22450Cable Kits Over 50’ - Contact Customer Service
224 SERIES
INVISIWARE® RECEIVER
PULL-LOCK™ END FITTING
AS&D™ Aluminum Rail and Cable - Anodized - Series 200 Top Rail
A
lum
inu
m R
aili
ng
an
d C
able
Sys
tem
AS&
D™
*Asterisk denotes NON STOCK special order. Please contact ADI customer service.136
Marketed and Distributed by: Absolute Distribution, Inc.
136
Marketed and Distributed by: Absolute Distribution, Inc.
ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERS
AS&D Series 200 Top RailSeries 200 Top Rail
Sold in any quantity.
to achieve any length required. Field trimmable with carbide blade.
End plate sold separately.
4’ Top Rail (3-1/2” x 1-7/8” x 46”)Item #: ASTR200ANO4KIT - AnodizedItem #: ASTR200BLK4KIT - BlackItem #: ASTR200BRN4KIT - BronzeItem #: ASTR200WHT4KIT - White
8’ Top Rail (3-1/2” x 1-7/8” x 8’)Item #: ASTR200ANO8KIT - AnodizedItem #: ASTR200BLK8KIT - BlackItem #: ASTR200BRN8KIT - BronzeItem #: ASTR200WHT8KIT - White
Anodized
Black
Bronze
White
Available in:
←
8’ - Series 200 Top Rail - Walnut WoodgrainSold in any quantity.
3-1/2” x 1-7/8” x 8’ Series 200 aluminum top rail with powder coated
clean look. End plate sold separately.
Item #: ASTR200WAL8KIT - 8’ Length, Walnut Woodgrain
WalnutWoodgrain
Available in:
Series 200 Top Rail End PlateSold in any quantity.
Aluminum end plate required to cap series 200 top rail ends for a
Item #: ASEP200ANO - AnodizedItem #: ASEP200BLK - BlackItem #: ASEP200BRN - BronzeItem #: ASEP200WHT - WhiteItem #: ASEP200WAL - Walnut Woodgrain
Anodized
Black
Bronze
White
WalnutWoodgrain
Available in:
Alu
min
um
Rai
lin
g a
nd
Cab
le S
yste
m
A
S&D
™
*Asterisk denotes NON STOCK special order. Please contact ADI customer service. 137
Marketed and Distributed by: Absolute Distribution, Inc.
137
Marketed and Distributed by: Absolute Distribution, Inc.
ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERS
AS&D Series 200 Rail SplicesStraight Splice
Sold in any quantity.
length run. Installs with stainless steel #10 x 3/4” self drilling screws. (Not included)
Item #: ASSPL200 - Straight Splice
Aluminum
Available in:
90 Degree SpliceSold in any quantity.
Splices top rails to make a 90 degree angle for series 200 top rail. Installs with stainless steel #10 x 3/4” self drilling screws. (Not included)
Item #: ASSPL20090 - 90 Degree Splice
Aluminum
Available in:
135 Degree SpliceSold in any quantity.
Splices top rails to make a 135 degree angle for series 200 top rail. Installs with stainless steel #10 x 3/4” self drilling screws. (Not included)
Item #: ASSPL200135 - 135 Degree Splice
Aluminum
Available in:
Notched Splice for StairsSold in any quantity.
For continuos level to stair transition. Bends to accommodate any angle from 0o - 38o. Requires miter cutting of top rail. Installs with stainless steel #10 x 3/4” self drilling screws. (Not included)
Item #: ASSPLST - Notched Splice
Aluminum
Available in:
A
lum
inu
m R
aili
ng
an
d C
able
Sys
tem
AS&
D™
*Asterisk denotes NON STOCK special order. Please contact ADI customer service.138
Marketed and Distributed by: Absolute Distribution, Inc.
138
Marketed and Distributed by: Absolute Distribution, Inc.
ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERS
AS&D Series 100 Graspable Top Rail for Stair ApplicationsSeries 100 Top Rail for Stairs
Sold in any quantity.
End plate sold separately.
4’ Top Rail (46”)Item #: ASTR100ANO4KIT - AnodizedItem #: ASTR100BLK4KIT - BlackItem #: ASTR100BRN4KIT - BronzeItem #: ASTR100WHT4KIT - White
8’ Top Rail (96”)Item #: ASTR100ANO4KIT - AnodizedItem #: ASTR100BLK4KIT - BlackItem #: ASTR100BRN4KIT - BronzeItem #: ASTR100WHT4KIT - White
Anodized
Black
Bronze
White
Available in:
←
Series 100 Top Rail End PlateSold in any quantity.
Aluminum end plate required to cap series 100 top rail ends for a
Item #: ASEP100ANO - AnodizedItem #: ASEP100BLK - BlackItem #: ASEP100BRN - BronzeItem #: ASEP100WHT - White
Anodized
Black
Bronze
White
Available in:
Alu
min
um
Rai
lin
g a
nd
Cab
le S
yste
m
A
S&D
™
*Asterisk denotes NON STOCK special order. Please contact ADI customer service. 139
Marketed and Distributed by: Absolute Distribution, Inc.
139
Marketed and Distributed by: Absolute Distribution, Inc.
ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERS
AS&D Series 400 Top Rail
Intermediate Post Fitting for 100 Series Top RailSold in any quantity.
Used on stair posts for over the post mounting style of 100 series top rail. Fitting attaches to the top of post and allows for top rail to be installed at any angle.
Item #: ASIPFSETANO - AnodizedItem #: ASIPFSETBLK - BlackItem #: ASIPFSETBRN - BronzeItem #: ASIPFSETWHT - White
Anodized
Black
Bronze
White
Available in:
1” Rail Connector BlockSold in any quantity.
Used to terminate series 100 top rail into post. 12” connector block can be used to splice 100 series top rail together. 12” splice requires use of 8 screws to secure in place.
Item #: ASRCB1 - 1” Connector Block - LevelItem #: ASRCB12 - 12” Connector Block / Splice
Aluminum
Available in:
Anodized
Black
Bronze
White
Available in: 4’ - Series 400 Top Rail for Wood Cap RailSold in any quantity.
Series 400 aluminum rail cap for attaching wood/composite top rail.
4’ Top Rail (2” x 1-5/8” x 46”)Item #: ASTR400ANO4KIT - AnodizedItem #: ASTR400BLK4KIT - BlackItem #: ASTR400BRN4KIT - BronzeItem #: ASTR400WHT4KIT - White
8’ Top Rail (2” x 1-5/8” x 8’)Item #: ASTR400ANO8KIT - AnodizedItem #: ASTR400BLK8KIT - BlackItem #: ASTR400BRN8KIT - BronzeItem #: ASTR400WHT8KIT - White
←
*Wood cap rail not included
A
lum
inu
m R
aili
ng
an
d C
able
Sys
tem
AS&
D™
*Asterisk denotes NON STOCK special order. Please contact ADI customer service.140
Marketed and Distributed by: Absolute Distribution, Inc.
140
Marketed and Distributed by: Absolute Distribution, Inc.
ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERS
AS&D Surface Mount PostsSurface Mount End Post - Pre-Drilled
Sold in any quantity.
2-3/8” Square surface mount post with 5” base plate. Base plate holes for fasteners are 3/8”. Pre-drilled post is drilled at 3-3/16” on center spacing. 10 holes for 36” rail, 12 holes for 42” rail. Engineered to meet code with posts at 50” on center spacing. Fasteners and caps for mounting base plate sold separately.
36” Rail Height (2-3/8” x 35”)Item #: ASCEP200ANO35 - AnodizedItem #: ASCEP200BLK35 - BlackItem #: ASCEP200BRN35 - BronzeItem #: ASCEP200BWHT35 - White
42” Rail Height (2-3/8” x 41”)Item #: ASCEP200ANO41 - AnodizedItem #: ASCEP200BLK41 - BlackItem #: ASCEP200BRN41 - BronzeItem #: ASCEP200WHT41 - White
Anodized
Black
Bronze
White
Available in:
Surface Mount Intermediate Post - Pre-DrilledSold in any quantity.
2-3/8” Square surface mount post with 5” base plate. Base plate holes for fasteners are 3/8”. Pre-drilled post is drilled at 3-3/16” on center spacing. 10 holes for 36” rail, 12 holes for 42” rail. Engineered to meet code with posts at 50” on center spacing. Fasteners and caps for mounting base plate sold separately.
36” Rail Height (2-3/8” x 35”)Item #: ASCIP200ANO35 - AnodizedItem #: ASCIP200BLK35 - BlackItem #: ASCIP200BRN35 - BronzeItem #: ASCIP200WHT35 - White
42” Rail Height (2-3/8” x 41”)Item #: ASCIP200ANO41 - AnodizedItem #: ASCIP200BLK41 - BlackItem #: ASCIP200BRN41 - BronzeItem #: ASCIP200WHT41 - White
Anodized
Black
Bronze
White
Available in:
Alu
min
um
Rai
lin
g a
nd
Cab
le S
yste
m
A
S&D
™
*Asterisk denotes NON STOCK special order. Please contact ADI customer service. 141
Marketed and Distributed by: Absolute Distribution, Inc.
141
Marketed and Distributed by: Absolute Distribution, Inc.
ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERS
AS&D Mounting Brackets and Hardware
RED item numbers denote NON STOCK special order. Please allow for 2 - 3 week lead time.
Undrilled Post for Stair ApplicationsSold in any quantity.
46” x 2-3/8” Square undrilled post for cable system. Due to many variables in stair applications stair posts are undrilled to allow custom drill hole placement for cables. Determine bottom hole location, then use drilling template for remaining holes. Intermediate stair post holes are drilled at 3-3/16” on center and offset to allow cables to pass through at the angle of the stair. See page 143 for diagram.
Undrilled Post for Stair ApplicationsItem #: ASFMP200ANO46 - 46” AnodizedItem #: ASFMP200BLK46 - 46” BlackItem #: ASFMP200BRN46 - 46” BronzeItem #: ASFMP200WHT46 - 46” White
Requires Base Plate for Surface Mounting
Drilling Template:Use drilling template to mark 3-3/16” cable spacing on undrilled post for stair or custom applications.
Item # CABLETEMP
Anodized
Black
Bronze
White
Available in:
Base Plate with ScrewsSold in any quantity.
5” x 5” x 3/8” Aluminum base plate used for custom post applications. Base plate holes for fasteners are 3/8”. Can be used to convert fascia posts to surface mount post for stair applications. Includes 4 ea. 5/16” x 2” stainless steel screws - Use T25 torx head for installation.
Item #: ASBPANOKIT - AnodizedItem #: ASBPBLKKIT - BlackItem #: ASBPBRNKIT - BronzeItem #: ASBPWHTKIT - White
Item # ASDINSTKIT
Anodized
Black
Bronze
White
Available in:
Angle / Knee Wall Base Plate with ScrewsSold in any quantity.
wall applications with an angle of 32o - 38o. Base plate holes for fasteners are 3/8”.Includes 4 ea. stainless steel bolts. Use T25 torx head 5/16” x 2”
Item #: ASBPKWANOKIT - AnodizedItem #: ASBPKWBLKKIT - BlackItem #: ASBPKWBRNKIT - BronzeItem #: ASBPKWWHTKIT - White
Item # ASDINSTKIT
Anodized
Black
Bronze
White
Available in:
A
lum
inu
m R
aili
ng
an
d C
able
Sys
tem
AS&
D™
*Asterisk denotes NON STOCK special order. Please contact ADI customer service.142
Marketed and Distributed by: Absolute Distribution, Inc.
142
Marketed and Distributed by: Absolute Distribution, Inc.
ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERS
AS&D Fascia Mount Posts and Brackets
RED item numbers denote NON STOCK special order. Please allow for 2 - 3 week lead time.
Fascia Mount Intermediate Post - Pre-DrilledSold in any quantity.
2-3/8” Square fascia mount post for cable system. Pre-drilled post is drilled at 3-3/16” on center spacing. 10 holes for 36” rail, 12 holes for 42” rail. Engineered to meet code with posts at 50” on center spacing. Fascia brackets sold separately.
36” Rail Height (2-3/8” x 46”)Item #: ASFMCIP200ANO46 - 46” AnodizedItem #: ASFMCIP200BLK46 - 46” BlackItem #: ASFMCIP200BRN46 - 46” BronzeItem #: ASFMCIP200WHT46 - 46” White
42” Rail Height (2-3/8” x 52”)Item #: ASFMCIP200ANO52 - 52” AnodizedItem #: ASFMCIP200BLK52 - 52” BlackItem #: ASFMCIP200BRN52 - 52” BronzeItem #: ASFMCIP200WHT52 - 52” White
Anodized
Black
Bronze
White
Available in:
Fascia Mount End Post - Pre-DrilledSold in any quantity.
2-3/8” Square fascia mount post for cable system. Pre-drilled post is drilled at 3-3/16” on center spacing. 10 holes for 36” rail, 12 holes for 42” rail. Engineered to meet code with posts at 50” on center spacing. Fascia brackets sold separately.
36” Rail Height (2-3/8” x 46”)Item #: ASFMCEP200ANO46 - 46” AnodizedItem #: ASFMCEP200BLK46 - 46” BlackItem #: ASFMCEP200BRN46 - 46” BronzeItem #: ASFMCEP200WHT46 - 46” White
42” Rail Height (2-3/8” x 52”)Item #: ASFMCEP200ANO52 - 52” AnodizedItem #: ASFMCEP200BLK52 - 52” BlackItem #: ASFMCEP200BRN52 - 52” BronzeItem #: ASFMCEP200WHT52 - 52” White
Anodized
Black
Bronze
White
Available in:
Alu
min
um
Rai
lin
g a
nd
Cab
le S
yste
m
A
S&D
™
*Asterisk denotes NON STOCK special order. Please contact ADI customer service. 143
Marketed and Distributed by: Absolute Distribution, Inc.
143
Marketed and Distributed by: Absolute Distribution, Inc.
ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERS
RED item numbers denote NON STOCK special order. Please allow for 2 - 3 week lead time.
Fascia Mount Intermediate Stair Post - UndrilledSold in any quantity.
2-3/8” Square fascia mount post for cable system. Undrilled post is most commonly used as an intermediate stair post to allow custom hole placement for cables. Determine bottom hole location, then use drilling template for remaining holes. Holes are drilled at 3-3/16” on center and offset to allow cables to pass through at the angle of the stair. Fascia brackets sold separately.
36” Rail Height (2-3/8” x 46”)Item #: ASFMP200ANO46 - 46” AnodizedItem #: ASFMP200BLK46 - 46” BlackItem #: ASFMP200BRN46 - 46” BronzeItem #: ASFMP200WHT46 - 46” White
42” Rail Height (2-3/8” x 52”)Item #: ASFMP200ANO52 - 52” AnodizedItem #: ASFMP200BLK52 - 52” BlackItem #: ASFMP200BRN52 - 52” BronzeItem #: ASFMP200WHT52 - 52” White
Anodized
Black
Bronze
White
Available in:
Fascia Bracket - Outside CornerSold in any quantity.
For mounting 2-3/8” posts to deck fascia. This bracket is required to maintain 4” spacing on outside corners. Bracket offsets post 1” out from fascia. Mounting hardware is not included. Use 4 fascia screws to secure post in bracket and 4 lags or carriage bolts to secure bracket to fascia.
Item #: ASFMOCB200ANO6 - AnodizedItem #: ASFMOCB200BLK6 - BlackItem #: ASFMOCB200BRN6 - BronzeItem #: ASFMOCB200WHT6 - White
Item # ASSSFS - 1” Fascia Screw
Anodized
Black
Bronze
White
Available in:
6” Fascia BracketSold in any quantity.
For mounting 2-3/8” post to deck fascia. Bracket offsets post 1” out from fascia. Mounting hardware is not included. Use 4 fascia screws to secure post in bracket and 4 lags or carriage bolts to secure bracket to fascia.
Item # ASFMIPB200ANO6 - AnodizedItem # ASFMIPB200BLK6 - BlackItem # ASFMIPB200BRN6 - BronzeItem # ASFMIPB200WHT6 - White
Item # ASSSFS - 1” Fascia Screw
Anodized
Black
Bronze
White
Available in:
A
lum
inu
m R
aili
ng
an
d C
able
Sys
tem
AS&
D™
*Asterisk denotes NON STOCK special order. Please contact ADI customer service.144
Marketed and Distributed by: Absolute Distribution, Inc.
144
Marketed and Distributed by: Absolute Distribution, Inc.
ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERS
Bolt Cap w/ Stainless Steel Cup WasherSold in any quantity.
Item #: ASBOLTCAPANOKIT - AnodizedItem #: ASBOLTCAPBLKKIT - BlackItem #: ASBOLTCAPBRNKIT - BronzeItem #: ASBOLTCAPWHTKIT - White
Anodized
Black
Bronze
White
Available in:
3-1/2” Stainless Steel Lag Screw for Post BaseSold in any quantity.
3-1/2” x 3/8” Lag used to attach post base to deck or for mounting fascia bracket.
Item #: ASSCREWLAG4
Stainless Steel
Available in:
Stainless Steel
Available in: Fascia Bracket ScrewsSold in any quantity.
#14 x 1” Hex head stainless steel fascia bracket screw. Use for securing post to fascia bracket. Requires 4 per bracket.
Item #: ASSSFS - Fascia Screw
Fascia Mount Post CapSold in any quantity.
to post.
Item #: ASPCANO - AnodizedItem #: ASPCBLK - BlackItem #: ASPCBRN - BronzeItem #: ASPCWHT - White
Anodized
Black
Bronze
White
Available in:
Alu
min
um
Rai
lin
g a
nd
Cab
le S
yste
m
A
S&D
™
*Asterisk denotes NON STOCK special order. Please contact ADI customer service. 145
Marketed and Distributed by: Absolute Distribution, Inc.
145
Marketed and Distributed by: Absolute Distribution, Inc.
ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERS
AS&D AccessoriesDrilling Template For 2-3/8” Post
Sold in any quantity.
Used to mark 3-3/16” cable spacing on undrilled post for stair or custom applications.
Item # CABLETEMP - 40” PVC Drilling Template
Available in:
Color Matched ScrewsSold in 100 Pack.
#10 - 3/4” phillips head screw attaches top rail to posts, and also used for splices.
Item #: ASSCREWBLKW805 - BlackItem #: ASSCREWBRNW805 - BronzeItem #: ASSCREWWHTW805 - WhiteItem #: ASSCREWSSW805 - Stainless SteelItem #: ASSCREWWALW805-1 - Walnut Woodgrain (sold as eaches)
Black
Bronze
White
Stainless Steel
WalnutWoodgrain
Available in:
Internal Post BraceSold in any quantity.
Internal post brace is used to strengthen AS&D end posts where cable tensioning is being applied. Can also be used as a splice for unique angles in the Series 200 top rail or as a splice for Series 400 top rail
Item # ASEPIF36 - 32” length Item # ASEPIF42 - 40” length
Touch-Up PaintSold in any quantity.
Touch up paint available to cover up scratches and cuts from installation.
Spray Can
Item #: ASPAINTBLK - BlackItem #: ASPAINTBRN - Bronze Item #: ASPAINTWHT - White
Paint Pen
Item # 660368 - BlackItem # 300734 - White
Black
Bronze
White
Available in:
A
lum
inu
m R
aili
ng
an
d C
able
Sys
tem
AS&
D™
*Asterisk denotes NON STOCK special order. Please contact ADI customer service.146
Marketed and Distributed by: Absolute Distribution, Inc.
146
Marketed and Distributed by: Absolute Distribution, Inc.
ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERS
AS&D Application OptionsStraight Cable Runs and Cable Runs Through One CornerDec has dedicated end posts for each run and the posts are situated such that the back side of the posts are all accessible meaning you can use an outside-of-post to outside-of-post con guration for all runs. When taking cable railing through a corner there are two options: Option 1: Terminating cable kits at each corner as shown in Deck 1.Option 2: Run cables continuously through a single corner as shown in Deck 2.
For 2-3/8” posts, applicable kit is the 224 Series. The tensioning device is 2-3/ ” long Receiver which installs through the aluminum post on one end. A Pull-Lock® tting of the same length is installed through the other end.
Deck 1
Deck 2
House
Series 224
3½”min. 3½”min.
outsidemount
outsidemount
outsidemount
outsidemount
outsidemount
outsidemount
Run #1
Run
#2
Run #3
Deck 1
AS&D™ Aluminum Rail and Cable - Black - Fascia Mount - Series 200 - Cable Through Corner Post
Post Base Install KitSold in any quantity.
Includes T40 Torx Bit and tube of bee’s wax for screws. Apply wax to post base screws for ease of installation.
Item # ASDINSTKIT
Alu
min
um
Rai
lin
g a
nd
Cab
le S
yste
m
A
S&D
™
*Asterisk denotes NON STOCK special order. Please contact ADI customer service. 147
Marketed and Distributed by: Absolute Distribution, Inc.
147
Marketed and Distributed by: Absolute Distribution, Inc.
ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D™ RAIL ORDERS
Due to many variables in stair applications stair posts are undrilled to allow maximum flexibility and allow custom hole placement for cables. All stair posts re uire the addition of a surface mount base plate or fascia bracket for mounting. The holes in the end posts are to be drilled straight through with a 29/64” bit and any intermediate posts must be drilled with offset holes to accommodate the angle of the stairs using a 3/16” bit.
Cable Runs on a Pitch
Deck 1 - Terminating cable from level to stair.Cable Runs are broken into two sections one for level and the other for stair. This allows for the Series 100 top rail to be used for the stairs which
uali es as a graspable handrail.
Stair Options
Deck 1Deck 1
Series 100 Top Rail for StairSeries 200 Top Rail on Level
*Illustrations are for representation purposes only*
Deck 2Deck 2
Series 200 Top Rail for Both Level and Stair
*Illustrations are for representation purposes only*
AS&D™ Aluminum Rail and Cable - Anodized Series 200 (Level) Series 100 (Stair)
Deck 2 - Continuous cable from level to stair.Cable runs through a single post at the top of the stairs without stopping. This can be achieved with either a Series 200 or Series 400 top rail. owever these top rails do not ualify as graspable rail and a secondary handrail will be re uired.
AS&D™ Aluminum Rail and Cable - Anodized Series 200 (Level and Stair)