marble arms catalog

M�A�

Marble Arms�The Leader in Iron Gun Sights�

®�

420 Industrial Drive�Gladstone MI 49837�

906-428-3710�www.marblearms.com�

www.marblearms.com�420 Industrial Park Gladstone MI 49837 • Phone: 906-428-3710 • Fax: 906-428-3711�

Ruger�®�Style Front Sights�

These fiber optic front sights replace the�standard factory sights for the Ruger�®� Super�Redhawks and Redhawk revolvers. They are�machined to match the special hook dovetail for these�guns. They give you the high visibility and precision�of a fiber optic sight with the strength of our solid steel�construction.�

Marble’s�®� has developed a line of uni-ramp front sights that fit all rifles, shotguns, and�muzzle loaders that use screw held front sights. The brilliantly glowing fiber optic cables are�installed and permanently flared to the sight. Both ends of the optic cable are carefully�polished to enhance light transmission and are uniquely protected from UV damage due to�long term exposure to sunlight. Each one is precision CNC machined from solid steel to our�exact standards. These fine sights are machined, polished, and blued to match your gun.�

The Marble’s�®� Uni-Ramp Front Sight is available in fluorescent orange and green in�a variety of heights.�

Uni-Ramp Front Sights�

Contour Front Sights� The Marble’s�®� front sight, with its unique�contour, has set the standard since 1900. These�magnificent front sights are the number one choice of�precision shooters and serious hunters.�

Marble’s�®� Contour Front Sights are strong,�stable, and give your rifle a true traditional look.�Marble’s�®� Contour Front Sights are available in two�widths for ramps or barrels along with various heights�from .260 inches to .570 inches. Choose a gold, ivory�or fiber optic bead. (Orange or Green)�

Front Sight with Dovetail Ramp�

Give yourself the extra height needed to match�up your front sight with your rear sight along with�maintaining the contour of your barrel. Choose the�standard bead or a fiber optic front sight to dovetail into�the Marble’s�®� ramp. The ramp screws securely to your�barrel with one 6-48 screw that is provided.�

®�Marble Arms�

The Leader in Iron Gun Sights�M�

A�Marbles�®�Front Sights�

Made in USA�

Front Sight Chart�

Sight Sight� Bead� 1/16”�Bead�3/32”� Bead�Height Width Description Color Mfg# Mfg#�.260” .340” 26MR (Ramp Style) Gold� 502621 602621�.260” .340” 26MR (Ramp Style) Ivory� 502622 602622�.290” .340” 29MR (Ramp Style) Gold� 502921 602921�.290” .340” 29MR (Ramp Style) Ivory� 502922 602922�.312” .340” 31MR (Ramp Style) Gold� 503121 603121�.312” .340” 31MR (Ramp Style) Ivory� 503122 603122�.312” .531” 31W Gold� 103131 603131�.312” .531” 31W Ivory� 103132 203132�.343” .340” 34MR (Ramp Style) Gold� 503421 603421�.343” .340” 34MR (Ramp Style) Ivory� 503422 603422�.343” .531” 34W Gold� 103431 203431�.343” .351” 34W Ivory� 103432 203432�.375” .340” 37MR (Ramp Style) Gold� 503721 603721�.375” .531” 37MR (Ramp Style) Ivory� 503722 603722�.375” .531” 37W Gold� 103731 203731�.375” .531” 37W Ivory� 103732 203732�.410” .340” 41MR (Ramp Style) Gold� 504121 604121�.410” .340” 41MR (Ramp Style) Ivory� 504122 604122�.410” .531” 41W Gold� 104131 204131�.410” .531” 41W Ivory� 104132 204132�.450” .340” 45MR (Ramp Style) Gold� 504521 604521�.450” .340” 45MR (Ramp Style) Ivory� 504522 604522�.450” .531” 45W Gold� 104531 204531�.450” .531” 45W Ivory� 104532 204532�.500” .340” 50MR (Ramp Style) Gold� 505021 605021�.500” .340” 50MR (Ramp Style) Ivory� 505022 605022�.500” .531” 50W Gold� 105031 205031�.500” .531” 50W Ivory� 105032 205032�.530” .340” 53MR (Ramp Style) Gold� 505321 605321�.530” .340” 53MR (Ramp Style) Ivory� 505322 605322�.530” .531” 53W Gold� 105331 205331�.530” .531” 53W Ivory� 105322 205332�.570” .531” 57W Gold� 105731 205731�.570” .531” 57W Ivory� 105732 205732�

Front Sight Chart/Fiber Optic 3/32” Bead�

Sight Fiber�Height Width Description Optic Color Mfg#�.312” .340” 31MR (Ramp Style) F/O Orange� 603125�.312” .340” 31MR (Ramp Style) F/O Green� 603126�.312” .531” 31W F/O Orange� 203135�.312” .531” 31W F/O Green� 203136�.343” .340” 34MR (Ramp Style) F/O Orange� 603425�.343” .340” 34 MR (Ramp Style) F/O Green� 603426�.343” .531” 34W F/O Orange� 203435�.343” .531” 34W F/O Green� 203436�.375” .340” 37MR (Ramp Style) F/O Orange� 603725�.375” .340” 37MR (Ramp Style) F/O Green� 603726�.375” .531” 37W F/O Orange� 203735�.375” .531” 37W F/O Green� 203736�.410” .340” 41MR (Ramp Style) F/O Orange� 604125�.410” .340” 41MR (Ramp Style F/O Green� 604126�.410” .531” 41W F/O Orange� 204135�.410” .531” 41W F/O Green� 204136�.450” .340” 45MR (Ramp Style) F/O Orange� 604525�.450” .340” 45MR (Ramp Style) F/O Green� 604526�.450” .531” 45W F/O Orange� 204535�.450” .531” 45W F/O Green� 204536�.500” .340” 50MR (Ramp Style) F/O Orange� 605025�.500” .340” 50MR (Ramp Style) F/O Green� 605026�.500” .531” 50W F/O Orange� 205035�.500” .531” 50W F/O Green� 205036�.530” .340” 53MR (Ramp Style) F/O Orange� 605325�.530” .340” 53MR (Ramp Style) F/O Green� 605326�.530” .531” 53W F/O Orange� 205325�.530” .531” 53W F/O Green� 205326�.570” .531” 57MR (Ramp Style F/O Orange� 205725�.570” .531” 57MR (Ramp Style) F/O Green� 205726�*Height measured from top of bead to bottom of Dovetail.�

Front Sight Ramp w/ Dovetail Slot�

Ruger�®�Style Pistol Fiber Optic Front Sights�Fiber Optic� Sight Green Orange�Model Height Mfg# Mfg#�Super Redhawk .44 Mag., GP-100 .332”� 101003 101002�Super Redhawk .454 Casull .310”� 101005� 101004�Super Redhawk .480 Ruger .390”� 101007� 101006�Redhawk .44 Mag., Black Hawk Hunter�

Fiber Optic Uni-Ramp Front Sights�Barrel Sight F/O Orange F/O Green�Diameter Height Mfg# Mfg#�.625” .405”� 072400 072401�.625” .470”� 072402 072403�.750” .405”� 072404 072405�.750” .470”� 072406 072407�.875” .405”� 072408 072409�.875” .470”� 072410 072411�

Barrel Sight Barrel Sight�Diameter Height Mfg# Diameter Height Mfg #�.625 .100”� 072310� .625” .225”� 072330�.6875 .100”� 072311� .6875” .225”� 072331�.875 .100”� 072312� .875 .225”� 072332�Flat .100”� 072313� Flat .225”� 072333�*Height measured from bottom of radius to bottom of Dovetail.�


The Marble’s�®� Sporting Rear Sight is the most recognizable "American Classic" pattern rifle sight.�The design dates back to the late 1800s.�The Marble’s�®�sporting rear sight became the preferred factory installed, barrel mounted sight of all the major�rifle manufacturers. Fast handling, quick firing vintage rifles made by Winchester, Marlin, Remington, and�Savage all had Marble’s�®� sporting rear sights. We proudly offer the same sporting rear sight as we did 100�years ago. We even still hand-polish each one before it’s blued.� Our sporting rear has the unique double step elevator and the�reversible U-shaped and V-shaped notch piece for precision sight-in. The�overall sight can be moved up and down with the double step elevator-just�like the vintage models. The hand painted enamel diamond on the notch�piece instantly draws your eye to the sight notch for quick, instinctive�shooting.� The Marble’s�®� Sporting Rear Sight™ is available in flat top,�semi-buckhorn or full buckhorn style. We still offer the 1-7/8 inch short�carbine model and the 2-3/4 inch full rifle model. (Measuring from center�of dovetail to front of face.) The authentic Marble’s�®� Sporting Rear Sight is�available in over 20 various heights from .275 inches to .630 inches.�

Full- Buckhorn�

Semi- Buckhorn�

Flat Top�

Sporting Rear Sights�

Our unique reversible notch piece gives you a�choice of "U" or "V" shaped notch. A hand painted white�enamel diamond helps draw your eye to the center of your�notch. Held in place by sight screw. Can be adjusted�vertically for height.�

Protect your Dovetail slot with a�Marble’s�®� slot blank.�(.393 -.396 SAMMI Spec)�

Slot Blank�

Step Elevator�The Step Elevator controls the height adjustment of the rear�

sights just like the vintage models. Available for 1-7/8 inch and 2-3/4�inch rear sights. The double step design assures sturdiness. Thumb�button has been added for easy adjustment.�

Marble’s�®� has been making folding rear sights for almost 100 years. They flatten on top�of a gun barrel to allow the use of a Tang Peep sight or scope without interference. Our Folding�Leaf Rear Sight is available as windage adjustable or drift adjustable. This unique feature allows�you to precision adjust your sight with a small screwdriver or a hammer. The height adjustable�notch piece has both U-shaped and V-shaped centers. You can remove and reverse your notch�piece with a small screwdriver. The hand painted enamel diamond draws the eye to the center�of the notch for lightening quick sight alignment. Marble’s�®� Folding Leaf Rear Sights are�machined from solid steel and are available in traditional flat-top style. We make these fine sights�in four heights from .360 inches to .620 inches.�

Flat Top� Flat Top with�Windage Adjustment�

Folding Leaf Sight�

#95 Folding Sporting Rear�This classic Marble’s�®� Rear Sight has been used on lever�

action guns since 1906. Similar to our standard sporting rear sight, it�also has the ability to be folded down and used with a peep tang sight.�Complete with precision windage and elevation adjustment this sight�is the perfect partner for the classic sporting rear and Marble’s�®� Peep�Tang Sights. (Designed without elevator.)�

Windage Adjustment�

®�Marble Arms�


A�Marbles�®� Rear Sights�

Notch Piece & Screw�

Made in USA�

Item� Mfg#�

Slot Blank-Blued� 001187�

Slot Blank-�Nickel Plated�

001188�

Slot Blanks�

Item� Mfg#�

Notch Piece & Screw� 000950�

Double Step Elevator Short�(Fits #63, #63H #64, #64H, #65)�

009100�

Double Step Elevator Long�(Fits #66, #66H, #67, #67H, #68)�

009200�

Single Step Elevator�(.050” Thick)�

009050�

Single Step Elevator�(.080” Thick)�

009080�

Replacement Parts�

Windage Adjustment�

Fine Adjustment with Screw�

Style� Description� Sight�Height�

Mfg#�

Flat Top� #69� .360”-.460”� 006900�

Flat Top Folding� #69H� .460”-.560”� 006901�

Flat Top Folding� #69EH� .520”-.620”� 006902�

Windage�Adjustable�

#69W� .360”-.460”� 006910�


#69WH� .460”-.560”� 006911�


#69WEH� .520”-.620”� 006912�

Folding Leaf Sight�Folding Sporting Rear Sights�Style� Description� Sight Height� Mfg#�

Folding Sporting Rear� #95� .320”-.420”� 009500�

Measure from bottom of Upright to bottom of “U” or “V” notch.�

Style� Description� Elevation�Adjustment�

Mfg#�

Flat Top� #63� .275”-.505”� 006300�

Flat Top� #63H� .350”-.630”� 006301�

Semi-Buckhorn� #64� .275”-.505”� 006400�

Semi-Buckhorn� #64H� .350”-.630”� 006401�

Full Buckhorn� #65� .300”-.510”� 006500�

Sporting Rear Sights�

Long Blade 2-3/4” Long (Step Elevator Included)�

Style� Description� Elevation�Adjustment�

Mfg#�

Flat Top� #66� .300”-.510”� 006600�

Flat Top� #66H� .350”-.630”� 006601�

Semi-Buckhorn� #67� .300”-.510”� 006700�

Semi-Buckhorn� #67H� .350”-.630”� 006701�

Full Buckhorn� #68� .300”-.510”� 006800�Full- Buckhorn�(#65, #68)�

Semi- Buckhorn�(#64, #64H, #67, #67H)�

Flat Top�(#63, #63H, #66, #66H)�

Standard Folding Sight�(#69, #69H, #69EH)�

Flat Top with�Windage Adjustment�(#69W, #69WH, #69WEH)�

Measure from bottom of Dovetail to bottom of “U” or “V” notch�.�

By far, Marble’s�®�Universal Sights are the most versatile barrel mounted sight available today. The�system combines a strong, sleek ramping style base with the option of interchangeable Peep aperture or�Semi-Buckhorn “U” shaped sighting uprights to accommodate the individual shooting styles of any hunter.�The uprights can be changed or easily adjusted and is locked down with a tension screw. Elevation�adjustment has been improved with our�new push button system�that allows you to quickly change your�elevation in the field in a matter of seconds. The evenly spaced graduation lines allow you to repeat your�adjustments every time. Once set, these sights are rock solid and will hold up to the roughest use. All of the�components are CNC machined from solid steel- no casings, no stampings.� Marble’s�®� has designed one of the most versatile barrel-mounted fiber optic rear sights that can be�used on modern rifles, slug shotguns, and muzzleloaders. The brilliantly glowing fiber optics is 100%�protected in our reflector channels so you can walk through dense brush without fear of damaging the optic�cables. You can make precision elevation adjustments with our�new push button adjusting system�.� The�sight is available in all standard barrel contours and flat for octagon barrels. Marble’s fiber optics are UV�protected for long life.�

Marble’s�®� Universal Rear Sights�

Marble’s�®� #30 Universal Rear Sights�

Fluorescent Red�Fluorescent Green� Small Peep Style�Large Peep Style� U-Shaped Semi-Buckhorn�

Fiber Optic Set� U Upright with Ivory Bead� Peep Upright with Fiber Optic�

®�Marble Arms�


A�

Demonstration Video Available at: www.marblearms.com�420 Industrial Park Gladstone MI 49837 • Phone: 906-428-3710 • Fax: 906-428-3711�

Universal base-hole spacing from 1/2” to 1”�(center to center)�Two 6-48 mounting screws included.�Drill hole with #36 drill.�

Loosen screw for windage adjustment� Press button for elevation adjustment�

Made in USA�

Base/Slide�Barrel Diameter�

Mfg #�

.775 (M)� 002546�

.875 (L)� 002547�

1.000 (XL)� 002548�

Flat� 002549�

Marble’s�®� Universal Rear Sight�

Sight Uprights� Mfg#�

*U-Upright� 002554�

*Small Peep� 002550�

*Large Peep� 002551�

*Fluorescent�Orange�

002553�

*Fluorescent�Green�

002552�

*Sight Base and Slide sold together.�

*U-Uprights•Fluorescent Orange•Fluorescent Green�Measure top of barrel to bottom of “U”.�*Small Peep•Large Peep�Measure center of peep to top of barrel.�

*Height adjustment for all uprights: .490” - .675”�

-Hole size .150”�

-Hole size .085”�

*Sight Uprights each sold separately.�

Ordering Instructions:�

1. Determine your barrel diameter.�

2. Match the barrel diameter to the base and�select the Mfg #.�

(slide and 6-48 mounting screws included)�

3. Select your preferred Upright separately.�Choose the Mfg #.�

(uprights are sold separate from the base)�

Expert Shotgun Beads� Marble’s�®� "Expert" shotgun beads are used exclusively by a number of major�shotgun manufacturers. This style of bead can be rib mounted or directly mounted�on plain barrel shotguns. Our ivory and gold beads will appeal to most traditionalists.�The Marble’s�®� "Expert" bead body is precision machined from solid steel on our�5-1/2 axis CNC turning centers.�

Marble’s�®� "Expert" shotgun beads are also available with�fluorescent orange and green fiber optic cable. The cables are UV protected�and permanently bonded to our machined from solid steel "Expert" bases.�These brilliantly glowing beads will stand out in all light conditions and�extend your shooting hours on heavily overcast days in the field.� Bright enough to see clearly but unobtrusive enough to not alter the�traditional look of your shotgun. Wing shooters and clay target enthusiasts�will really be impressed with the light gathering qualities of the Marble’s�®�

Fiber Optic "Expert" shotgun beads.�

Fiber Optic Expert Beads�

Tritium Expert Shotgun Beads�

Extra-Lum Expert Beads�Marble’s�® “�Extra-Lum Expert" shotgun beads have 50 percent�

more light gathering qualities of our standard florescent beads. This�extra bright bead really stands out in any light conditions. You can�really rely on the brilliant “Extra-Lum Expert" bead. The UV protected�fiber optic cable is permanently bonded to our machined from solid�steel base. The ends are highly polished to further guarantee as much�light transfer to the eye as possible. Waterfowl hunters, turkey hunters�and clay target shooters will find the “Extra-Lum Expert" a true�enhancement to their shooting abilities�.�

Mid-Rib Shotgun Beads� Mid-Rib Shotgun Beads are compatible with any of our�traditional front shotgun beads including our "Expert" Shotgun�Beads. Available in either stake-in Ivory tapered shank for press�fit or brass threaded style. Place the mid-rib beads at the center�of the barrel or 12" to 16" from the muzzle sight to insure perfect�alignment with your front sight.�


Continuing Marble’s�®� mission of "blending time tested tradition with modern�technology" we are introducing a self illuminating shotgun bead. This sight is precision�machined from solid steel to house the tritium capsule that illuminates your front sight in the�dark. This, in combination with a ghost ring rear sight is the perfect combination for law�enforcement shotguns and home defense weapons.�

®�Marble Arms�


A�Marble’s�®�Shotgun Sights�

Shotgun Sight Installation�

To align the sight to the barrel you may have to slightly chamfer the�hole in the barrel or rib. This is done with a larger drill bit. (Using only�your fingers to spin the drill to remove a little metal from around the�tapped hole.) You want the sight to be finger tight with about an 1/8 of�a turn left before it is aligned. Remove the sight and use a drop of�Locktite and install the sight. You can use a small wrench to adjust�the sight to align with the barrel. If the shank is showing in the bore of�the barrel you will have to shorten the shank.�

3x56-3/32”�& m2.5x.45�

6x48-3/32”� 6x48OS-3/32”� 5x40-3/32”� m3.0x.5-3/32”�

Style� Mfg#� Mfg#� Mfg#� Mfg#� Mfg#�Gold� 035611� 064811� 041611� 054011� 030511�

Ivory� 035612� 064812� 041612� 054012� 030512�

F/O Green� 035615� 064819� 041619� 054015� 030515�

F/O Orange� 035616� 064820� 041620� 054016� 030516�

Ex F/O Green� 035617� 064821� 041621� 054017� 030517�

Ex F/O Red� 035618� 064822� 041622� 054018� 030518�

Tritium� 035619� 064823� 041623� 054019� 030519�

Expert Shotgun Sights�*6x48 OS-.146 major dia. X 48 TPI- with 3/32” shank�

Company� Mode� Thread�Mossberg� 5-40�

Winchester� Mod 12� 2-56�(must be re-tapped to 3-56)�

Winchester� SX2� 3-56�

Ithaca� 37� 6-48�

Remington� Ivory Bead� 6-48 Over Sized�

Remington� Silver Bead� 6-48 OS (must drill & tap)�

Springfield/Savage/Stevens� 67� 2-56�(must be re-tapped to 3-56)�

Beretta� M2.5x.45 use 3-56�

Benelli� Citori� 3-56�

Browning� Gold� m3x.5�

Browning� A-5� m3x.5�

Ruger� Red label� 3-56�

H & K� m3x.5�

Shotgun Thread Size�

Style� Mfg #�#223 Ivory Stake O .080 dia.� 022300�Brass Bead 3x56-32/32”� 051813�Reamer-223� 022600�

Mid-Rib Shotgun Beads�

Tap� Drill Size�

3x56� #45�

m3x.5� #41�

5x40� #38�

6x48� #36�

6x48OS� #32�

Drill and Tap Size�

Made in USA�

The Marble’s�®� Peep Tang Sight is one of the cornerstones of our line. In the days when iron sights were the rule�and scopes were the exception, the Peep Tang Sight was considered the top of the line in both precision shooting�

and general hunting. The increase in speed is due to the way your vision is drawn through the rear sight. You�don’t have to acquire a sight picture. You are looking through the rear sight not at the rear sight. Just put the front�

sight where you want to shoot and squeeze the trigger. It’s the fastest sight combination for Cowboy Action�Shooters. Webster Marble advocated a tang mounted peep sight on every hunting gun and called the Peep Tang�

Sight "the perfect rear sight." Once you use one, you will agree.�

420 Industrial Park Gladstone MI 49837 • Phone: 906-428-3710 • Fax: 906-428-3711�

Winchester ‘94 Style� Savage 99 Style� Marlin 336 Style�

Windage Adjustment� Elevation Adjustment�

www.marblearms.com�

®�Marble Arms�


A�Marble’s�®� Standard�

Peep Tang Sight�

The Marble’s�®�Peep Tang Sight is adjustable for windage and elevation. The adjustments are micrometer�precise. Each firm detent click equals four-tenths of an inch movement at 100 yards.�

Manufacturer� Model� Sight #� Screw Set #�

American Arms� 1874 Sharps� 009816� 995027�Armi� 1874 Sharps� 009836� 995032�Ballard� #8 Union Hill� 009827� 995025�Browning� 1885 (w/ Metal�

tang)�009800� 995033�

Browning� 1892 (Tang Safety)� 009802� 995024�

Browning� 1886� 009806� 995013�

Browning� 78-1885 (w/out�Tang)�

009813� 995026�

Browning� 1895 (Japan)� 009814� 995007�

Browning� 1895 (Orig)� 009815� 995017�

Browning� 71LT� 009822� 995007�

Browning� 53-65-1892� 009824� 995007�

Browning� 71 Will not fit�Carbine�

009828� 995023�

Cimarron� 1866� 009811� 995006�

Cimarron� 1873, 73 Sporting�Rifle�

009832� 995010�

Colt Lightning� Small Frame-CAS� 009831� 995029�EMF� 1874 Sharps Will�

not fit Carbine�009836� 995032�

Glenfield� 30� 009804� 995015�H & R� Buffalo Classic� 009813� 995026�Henry� Golden Boy .22LR�

Golden Boy�.22MAG�

009833� 995001�

Henry� Big Boy 44 , 45,�357, 30/30�

009844� 995003�

Henry� H001 .22 Lever�action All H001�Except H001V�

009848� 995006�

Marlin� 39AS-1894 CB &�CB II-1894S & CS-�1897 CB�

009804� 995015�

Marlin� 30AS-336-444SS-�1895G-1895SS/�30AW�

009805� 995015�

Marlin� 39A-1889-1892-�(Orig)/ 25-27-29-�1897�

009827� 995025�

Marlin� 1894 (Orig)/1893� 009829� 995025�

Marlin� 1897 Annie Oakley� 009834� 995015�

NEF� Survivor� 009839� 995016�

Remington� RB1 Current�Production�

009826� 995001�

Remington� Model 1-2-5� 009819� 995001�

Rossi� 65 New 1892� 009807� 995002�

Rossi� 59-62� 009818� 995005�

Savage� 30G Stevens�Favorite OLD�

009827� 995025�

Manufacturer� Model� Sight #� Screw Set #�

Savage� 1899� 009840� 995025�

Savage� 30G Stevens�Favorite NEW�

009841� 995025�

Shiloh Sharps� 1874� 009838� 995030�

Shiloh Sharps� New� 009843� 995030�

Springfield� 1870� 009813� 995026�

Taurus� M62� 009837� 995001�

Taurus� Thunderbolt C45� 009860� 995001�

Taylor� 1874 Sharps� 009836� 995032�

Thompson�Center�

Scout� 009800� 995001�

Uberti� Henry� 009825� 995028�

Uberti� 1885� 009851� 995033�

Uberti� 1866� 009811� 995006�

Uberti� 1892� 009820� 995006�

Uberti� Rolling Block� 009826� 995001�

Uberti� 1873 Will not fit�Hunter�

009832� 995006�

Varner� .22 Cal Favorite� 009835� 995008�

Winchester� 1885 (Japan) HI-�Wall�

009800� 995001�

Winchester� 1876-1886(Orig)� 009801� 995019�

Winchester� 1892 (Tang�Safety)�

009802� 995024�

Winchester� 62-1890-1906� 009803� 995018�

Winchester� 1886 (Japan)� 009806� 995013�

Winchester� 53-55-64-65-1892�(Orig)-1894�(Except .22 CAL)�

009808� 995003�

Winchester� 1866-1873� 009809� 995004�


009810� 995022�

Winchester� 9422 (.22 LR)� 009812� 995001�


009814� 995007�

Winchester� 71LT� 009817� 995021�

Winchester� 1885 (Orig)� 009821� 995021�

Winchester� 71� 009828� 995023�

Winchester� 1885 (Japan) Low-�Wall�

009830� 995001�

Winchester� 9422 (.22�Magnum)�

009837� 995001�

Winchester� 94 Legacy (Tang�Safety)�

009849� 995009�

Standard Peep Tang Sights List by Manufacturer�

Sight #� Manufacturer/Model�

009800� Browning�1885 (w/ Metal tang�);�Thompson�Center�Scout;�Winchester�-�1885 (Japan) HI-�Wall�

009801� Winchester�1876-1886(Orig)�

009802� Browning�1892 (Tang Safety);�Winchester�1892 (Tang Safety)�

009803� Winchester�62-1890-1906�

009804� Glenfield�30�;�Marlin�39AS-1894 CB &CB�II-1894S & CS-1897 CB�

009805� Marlin�30AS-336-444SS-1895G-1895SS/�30AW�

009806� Browning�1886�;�Winchester�1886 (Japan)�

009807� Rossi�65 New1892�

009808� Winchester�53-55-64-65-1892 (Orig)-1894�(Except .22 CAL)�

009809� Winchester�1866-1873�

009810� Winchester�1886 (Tang Safety)�

009811� Cimarron�1866�;�Uberti�1866�

009812� Winchester�9422 (.22 LR)�

009813� Browning�78-1885 (w/out Tang)�;�H & R�Buffalo Classic�;�Springfield�1870�

009814� Browning�1895 (Japan)�;�Winchester�1895�(Tang Safety)�

009815� Browning�1895 (Orig)�

009816� American Arms�1874 Sharps�

009817� Winchester�71LT�

009818� Rossi�59-62�

009819� Remington�Model 1-2-5�

009820� Uberti�1892�

009821� Winchester�1885 (Orig)�

009822� Browning�71LT�

Standard Peep Tang Sights List by Sight Number�

Sight #� Manufacturer/Model�009824� Browning�53-65-1892�

009825� Uberti�Henry�

009826� Remington�RB1 Current Production�;�Uberti�Rolling Block�

009827� Ballard�#8 Union Hill�;�Marlin�39A-1889-�1892- (Orig)/ 25-27-29-1897�;�Savage�30G�Stevens Favorite OLD�

009828� Browning�71 Will not fit Carbine�;�Winchester�71�

009829� Marlin�1894 (Orig) 1893�

009830� Winchester�1885 (Japan) Low-Wall�

009831� Colt Lightning�Small Frame-CAS�

009832� Cimarron�1873, 73 Sporting Rifle�;�Uberti�1873 Will not fit Hunter�

009833� Henry�Golden Boy .22LR Golden Boy�.22MAG�

009834� Marlin�1897 Annie Oakley�

009835� Varner�.22 Cal Favorite�

009836� Armi�1874 Sharps�;�EMF�1874 Sharps Will�not fit Carbine�;�Taylor�1874 Sharps�

009837� Taurus�M62�;�Winchester�9422 (.22�Magnum)�

009838� Shiloh Sharps�1874�

009839� NEF�Survivor�

009840� Savage�1899�

009841� Savage�30G Stevens Favorite NEW�

009843� Shiloh Sharps�New�

009844� Henry�Big Boy 44, 45, 357, 30/30, Rem.�

009848� Henry�H001 .22 Lever action All H001�Except H001V�

009849� Winchester 94 Legacy (Tang Safety)�

009851� Uberti�1885�

009860� Taurus�Thunderbolt C45�

Aperture� 009780� 1/2" Dia. .055 Hole�Aperture� 009782� 1/2" Dia. .102 Hole�Aperture� 009785� 3/4" Dia. .032 Hole�

Sight #� Hole Spacing�Center To Center�

Height�Adjustment�

Angle�

# 009800� 2.000" TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

# 009801� 2.185"� 2.125" TO 2.460"� 18 DEG.�

# 009802� .375"� 1.890" TO 2.225"� 18 DEG.�

# 009803� 2.000" TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

# 009804� .500"� 1.680" TO 2.015"� 18 DEG.�

# 009805� .460"� 2.325" TO 2.660"� 21 DEG.�

# 009806� 2.185"� 2.125" TO 2.460"� 18 DEG.�

# 009807� 2.000" TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

# 009808� 2.000" TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

# 009809� 2.000" TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

# 009810� .375"� 1.680" TO 2.015"� 18 DEG.�

# 009811� 2.000" TO 2.265"� 1.915" TO 2.250"� 18 DEG.�

# 009812� .500"� 1.680" TO 2.015� 21 DEG.�

# 009813� 2.000" TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

# 009814� .460"� 2.325" TO 2.660"� 21 DEG.�

# 009815� .460"� 2.325" TO 2.660"� 21 DEG.�

# 009816� 2.000" TO 2.265"� 1.68O TO 2.015� 18 DEG.�

# 009817� 2.185"� 1.680" TO 2.015"� 18 DEG.�

# 009818� 2.000" TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

# 009819� 1.937"� 2.415" TO 2.750"� 21 DEG.�

# 009820� 2.000" TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

# 009821� 2.000" TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

# 009822� 2.185"� 2.125" TO 2.460"� 18 DEG.�

# 009824� 2.000" TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

# 009825� 2.000" TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

# 009826� 2.000" TO 2.265"� 2.415" TO 2.750"� 21 DEG.�

# 009827� 1.125"� 1.680" TO 2.015"� 21 DEG.�

# 009828� .375"� 2.135" TO 2.470"� 21 DEG.�

# 009829� .460"� 1.920" TO 2.255"� 21 DEG.�

# 009830� 2.000" TO 2.265"� 1.555" TO 1.890"� 18 DEG.�

# 009831� 1.937"� 2.165" TO 2.500"� 21 DEG.�

# 009832� 2.000' TO 2.265"� 1.915" TO 2.250"� 18 DEG.�

# 009833� 2.000' TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

# 009834� .500'� 1.685" TO 2.015"� 21 DEG.�

# 009835� 2.000" TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

# 009836� 2.283"� 1.680" TO 2.015"� 18 DEG.�

# 009837� 1.125"� 1.920" TO 2.255"� 21 DEG.�

# 009838� 2.283"� 1.680" TO 2.015"� 18 DEG.�

# 009839� 1.125"� I.680" TO 2.015"� 21 DEG.�

# 009840� 1.125"� 1.555" TO 1.890"� N/A�

# 009841� .500"� 1.920" TO 2.255"� 21 DEG.�

# 009843� 2.000" TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

# 009844� 2.000" TO 2.265"� 1.920" TO 2.255"� 18 DEG.�

# 009848� 2.000" TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

# 009849� 2.185"� 2.375" TO 2.710"� 18 DEG.�

# 009851� 2.000” TO 2.265”� 1.680” TO 2.015”� 18 DEG.�

# 009860� 2.000" TO 2.265"� 1.680" TO 2.015"� 18 DEG.�

Standard Peep Tang Sight Base Specifications�

Screw Set� Front Screw� Rear Screw� Extra Screw�

995001� #10-32 x .342� #10-32 x .342�

995002� #10-32 x .342� M5 x .8 x 1.815 Metric�

995003� #10-32 x .342� #12-28 x 1.9� #10-36 x .355�

995004� #10-32 x .342� #10-36 x .355� #10-36 x .355�

995005� #10-32 x .342� 172 x 50 x 1.53�

995006� #10-32 x .342� #10-32 x 1.83�

995007� #10-32 x .342� M5.5 x .5 x 1.775 Metric�

995008� #10-32 x .342� 195 x 4 x 1.15 Wood�

995009� #6-48 x .250� #12-28 x 1.812�

995010� #10-32 x .342� #10-32 x 1.915� #10-32 x 2.060�

995011� #10-32 x .342� #10-32 x 2.06�

995013� #10-32 x .342� M6.5 x .5 x 1.859 Metric�

995014� #10-32 x .342� M5.5 x .5 x 1.775 Metric�

995015� #10-32 x .342� #12-32 x 1.75�

995016� #10-32 x .342� #10-16 x .645 Wood�

995017� #10-32 x .342� #12-28 x 1.9�

995018� #10-36 x .355� #10-36 x 1.723�

995019� #10-36 x .355� #12-28 x 1.9�

995020� #10-36 x .355� #10-36 x .355�

995021� #10-36 x .355� #12-28 x 2.235�

995022� #4-48 x .341� M6.5 x .5 x 1.859 Metric�

995023� #4-48 x .341� #12-28 x 2.235�

995024� #4-48 x .341� M5.5 x .5 x 1.775 Metric�

995025� #8-40 x .367� #8-40 x .367�

995026� #10-16 x .645 Wood� #10-16 x .645 Wood�

995027� M5 x .8 x 1.060 Metric� M5x.8 x 1.905 Metric�

995028� 195 x 4 x 1.150 Wood� #10-32 x 2.060�

995029� #10-24 x .384� #10-24 x .384�

995030� #10-28 x .353� #10-28 x .353�

995031� .232 x 26 x 1.905� #10-28 x .353� #10-28 x .353�

995032� M4 x .7 x .367 Metric� M4 x .7 x .367 Metric�

995033� #10-32 x .342� #10-32 X .342� #10-32 x 1.830�

995034� #10-32 x .342� #10-32 x 2.06� #10-32 x 1.830�

Standard Peep Sight Screw Set�

Sight Base�

Marble’s�®� has improved the classic peep tang sight to accommodate all shooters regardless of the distance that�they shoot. The cowboy shooter and hunter both have asked to have the ability to shoot at 30 yards out to 500�yards and in some cases 1000 yards with the same gun and sight. We have taken our popular Marble’s�®� Peep�Sight that has elevation and windage adjustment and made it more versatile in the field.�

The sight base remains mounted to the tang as before and with a twist of the setscrew the post is removed.�

Select the post height that you want and press the post into place firmly then tighten the setscrew.�

These highly precision CNC machined parts match up every time for repeatability. The guide stud is machined from�4140 steel and heat treated for strength and hardness. We machined graduation lines on the elevation barrel, which�adjusts in .004” increments per click. We have also added a jam nut to lock in your elevation. This gives you the�advantage of pre-setting an assortment of uprights to be locked in at desired yardage.�

We have made this sight to be used by the traditional long-range shooters as an alternate to a Vernier or Soule style�sight. You can purchase (separately) additional shorter posts as well as mid and long-range posts, giving you the�versatility to shoot many guns out over 1,000 yards. The long-range post has 2 inches of elevation adjustment. All of�our sights are machined with the same care and quality that we that has been a tradition for over 110 years.�

Improved Peep Tang Sight Demonstration Video Available: www.marblearms.com�420 Industrial Park Gladstone MI 49837 • Phone: 906-428-3710 • Fax: 906-428-3711�

®�Marble Arms�


A�Marble’s�®�Improved�

Peep Tang Sight�

Manufacturer� Model� Sight Base #� Screw Set #� *Upright Selection�American Arms� 1874 Sharps� 991001� 995027� Standard�Armi� 1874 Sharps� 991001� 995032� Short�Ballard� #8 Union Hill� 991021� 995025� Short�Browning� 1885 (w/ metal tang)� 991001� 995001� Short�Browning� 78, 1885,(w/out tang)� 991001� 995026� Short�Browning� 53, 65, 1892 (Japan)� 991001� 995007� Short�Browning� 1886� 991015� 995013� Standard�Browning� 71LT� 991015� 995007� Standard�Browning� 1895 (Japan)� 991025� 995007� Standard�Browning� 1895 (Orig)� 991025� 995017� Standard�Browning� 71� 991030� 995021� Standard�Browning� 1892 (Tang Safety)� 991035� 995024� Standard�Cimarron� 1873� 991001� 995034� Standard�Cimarron� 1866� 991001� 995010� Standard�Colt Lightning� Sm. Frame, CAS Shoot� 991011� 995029� Standard�EMF� 1874 Sharps (not carbine)� 991001� 995032� Short�Marlin/Glenfield� 30GT, 30AS� 991020� 995015� Short�H&R� Buffalo Classic� 991001� 995026� Short�Henry� .22 LR, 22Mag, H004, H004M� 991011� 995017� Short�Henry� H001, H001T, .22 Lever (not H001V)� 991001� 995006� Short�Henry� Big Boy .44, 45,357, 30/30 Mag,� 991001� 995017� Standard�

Marlin� 39A,39AS,39M,39TDS� 991020� 995015� Short�Marlin� 1894CB, 1894CBII, 1894S,1894CS, 1897CB 1897 Annie�

Oakley�991020� 995015� Short�

Marlin� 39, 39A, (Old Model), 1889, 1892 (Orig), 1984 (Orig)� 991021� 995025� Short�Marlin� 336, 444SS, 1895G, 1895SS Any 336 Framed Gun� 991025� 995015� Standard�Marlin� 25,27,29,(originals), 1893� 991021� 995025� Short�Marlin� 30AW� 991025� 995015� Short�NEF� Survivor� 991021� 995016� Standard�Remington� Model 1,2,5� 991011� 995031� Standard�Remington� RB1 (Current Production)� 991011� 995001� Short�Rossi� 65, 1892� 991001� 995002� Short�Rossi� 59,62� 991001� 995005� Short�Savage� 30G Stevens Favorite� 991021� 995025� Short�Shiloh� Sharps 1874, 1874 (New)� 991001� 995030� Short�Springfield� 1870� 991001� 995026� Short�Taurus� M62� 991021� 995001� Short�Taylor� 1874 Sharps� 991001� 995003� Short�Thompson Center� Scout� 991001� 995001� Short�Uberti� 1873 (Not Hunter)� 991001� 995006� Standard�Uberti� 1885� 991001� 995033� Short�Uberti� 1892� 991001� 995001� Short�Uberti� 1886� 991001� 995001� Standard�Uberti� Henry� 991001� 995028� Short�Uberti� Rolling Block� 991011� 995001� Short�Varner� 322 Cal Favorite� 991001� 995008� Standard�Winchester� 1885 Hi-Wall & Low Wall (Japan)� 991001� 995001� Short�Winchester� 53,55� 991001� 995003� Short�Winchester� 62,1890,64,65� 991001� 995018� Short�Winchester� 1866� 991001� 995003� Short�Winchester� 1873� 991001� 995020� Short�

Winchester� 1885 (Orig)� 991001� 995004� Short�Winchester� 1892 (Orig), 1894 (except .22 cal)� 991001� 995003� Short�

* Lowest upright height varies depending on gun.�Recommended lowest upright provided.�Improved Peep Tang Sights List by Manufacturer�

Improved Peep Tang Sights List by Sight Number�Sight� Manufacturer/Model�991001� American Arms�1874 Sharps�;�

Armi�1874 Sharps�

Browning�1885 (w/ metal tang)�;�78, 1885,(w/out tang)�;�53, 65, 1892 (Japan)�

Cimarron 1866�;� 1873;�EMF�1874 Sharps (not carbine)�;�

H&R�Golden Boy .22LR�

Henry�H001, H001T, .22 Lever (not H001V)�;�Big Boy .44, .45, 357, 30/30, Mag.�

Rossi�65, 1892�;�Rossi�59,62�;�Shiloh�Sharps 1874, 1874 (New)�

Springfield�1870�;�Taylor�1874 Sharps�

Thompson Center�Scout�

Uberti�1873 (Not Hunter)�1885�;�1892, 1886�;�Henry�

Varner�22 Cal Favorite�

Winchester�1885 Hi-Wall & Low Wall (Japan)�;�53,55�;�62,1890,64,65�;�1866�;�1873�;�1885 (Orig)�1892 (Orig), 1894 (except .22�cal)�;�1906�

991011� Colt Lightning�Sm. Frame, CAS Shoot�;�

Remington�Model 1,2,5�;�RB1 (Current Production)�

Uberti�Rolling Block�

991015� Browning�1886�;�71LT�

Winchester�1876, 1886 (Orig)�;�1886 (Japan)�;�71LT�

991017� Winchester 94 Legacy�

991020� Marlin�39A,39AS,39M,39TDS (current model)�;�1894CB,1894 CBII,1894S 1894 CS,1897 CB,1897, Annie Oakley�

Winchester�9422 (.22 LR)�

Glenfield 30�

991021� Ballard�#8 Union Hill�

Marlin�39&39A,(Old Model),1889,1892 (Orig)1984 (Orig)�;�25,27,29,(originals), 1893�

NEF�Survivor�;�

Savage�30G Stevens Favorite (old production)�

Taurus�M62�

Winchester�9422 (.22 Magnum)�

991025� Browning�1895 (Japan)�;�1895 (Orig)�;�

Marlin�336, 444SS, 1895G, 1895SS Any 336 Framed Gun�;�30AW�

Winchester�1895 (Tang Safety)�

991030� Browning�71�

Winchester�1886 (Tang Safety)�;�71�

991035� Browning�1892 (Tang Safety)�;�

Winchester�1892 (Tang Safety)�

Manufacturer� Model� Sight Base #� Screw Set #� *Upright Selection�

Winchester� 1906� 991001� 995003� Short�

Winchester� 1876, 1886 (Orig)� 991015� 995018� Standard�

Winchester� 1886 (Japan)� 991015� 995019� Short�

Winchester� 71LT� 991015� 995013� Short�

Winchester� 9422 (.22 LR)� 991020� 995021� Short�

Winchester� 9422 (.22 Magnum)� 991021� 995001� Standard�

Winchester� 1895 (Tang Safety)� 991025� 995014� Standard�

Winchester� 1886 (Tang Safety)� 991030� 995022� Short�

Winchester� 71� 991030� 995023� Standard�

Winchester� 1892 (Tang Safety)� 991035� 995024� Standard�

Winchester� 94 Legacy� 991017� 995009� Standard�

Improved Peep Tang Sights List by Manufacturer Con’t�

Improved Peep Tang Sight Screw Set�* Sight and Screw Set need to be ordered separately.�

* Some commemorative or limited addition models may have�variations in the screw length.�

Pocket Spring� 009907�3/32 Ball� 009910�Coil Spring� 009908�Set Screw 1� 009961� 6-32 cone�Set Screw 2� 009962� Barrel Set�Set Screw 3� 009963� Windage Set�Allen Wrench� 009965�

1. Select Manufacturer and Model of Gun.�(Winchester 1892 Replica made by Uberti, the�Manufacturer is Uberti)�

2. Select Sight Base Manufacture part number. (This�is the base only that will be attached to the tang of�the gun)�

3. Select the Mounting Screw Set. (Some bases are�interchangeable with multiple guns but need specific�screw sets- Example: T/C Scout takes the same�base as Uberti 1885 but the screws are different)�

4. There are 4 interchangeable uprights that are sold�separately. Each allow you to adjust elevation out to�different ranges with the same base. Our #1 upright�(shortest) does not clear the receiver on some guns�so the lowest possible upright to purchase for this�gun is our #2 upright. (lowest setting will start you at�short range shooting out to at least 100 yards)�

Summary:�Select Part # for Base�Select Part # for the Screw Set�Select Part # for all desired uprights.�(Different heights for different ranges)�

One aperture provided with each post.�

Screw Set� Front Screw� Rear Screw� Extra Screw�

995001� #10-32 x .342� #10-32 x .342�

995002� #10-32 x .342� M5 x .8 x 1.815 Metric�

995003� #10-32 x .342� #12-28 x 1.9� #10-36 x .355�

995004� #10-32 x .342� #10-36 x .355� #10-36 x .355�

995005� #10-32 x .342� 172 x 50 x 1.53�

995006� #10-32 x .342� #10-32 x 1.83� 10-32 x 2.060�

995007� #10-32 x .342� M5.5 x .5 x 1.775�Metric�

995008� #10-32 x .342� 195 x 4 x 1.15 Wood�

995009� #6-48 x .250� #12-28 x 1.812� #10-32 x 2.060�

995010� #10-32 x .342� #10-32 x 1.915�

995011� #10-32 x .342� #10-32 x 2.06�

995013� #10-32 x .342� M6.5 x .5 x 1.859�Metric�

995014� #10-32 x .342� M5.5 x .5 x 1.775�Metric�

995015� #10-32 x .342� #12-32 x 1.75�

995016� #10-32 x .342� #10-16 x .645 Wood�

995017� #10-32 x .342� #12-28 x 1.9�

995018� #10-36 x .355� #10-36 x 1.723�

995019� #10-36 x .355� #12-28 x 1.9�

995020� #10-36 x .355� #10-36 x .355�

995021� #10-36 x .355� #12-28 x 2.235�

995022� #4-48 x .341� M6.5 x .5 x 1.859�Metric�

995023� #4-48 x .341� #12-28 x 2.235�

995024� #4-48 x .341� M5.5 x .5 x 1.775�Metric�

995025� #8-40 x .367� #8-40 x .367�

995026� #10-16 x .645 Wood� #10-16 x .645 Wood�

995027� M5 x .8 x 1.060 Metric� M5x.8 x 1.905 Metric�

995028� 195 x 4 x 1.150 Wood� #10-32 x 2.060�

995029� #10-24 x .384� #10-24 x .384�

995030� #10-28 x .353� #10-28 x .353�

995031� #10-28 x .353� .232 x 26 x 1.905� #10-28 x .353�

995032� M4 x .7 x .367 Metric� M4 x .7 x .367 Metric�

995033� #10-32 x .342� #10-32 X .342� #10-32 x 1.830�

995034� #10-32 x .342� #10-32 x 2.060� #10-32 x 1.830�

Improved Peep Tang Sight�Ordering Process:�

Aperture� 009780� 1/2" Dia. .055 Hole�Aperture� 009782� 1/2" Dia. .102 Hole�Aperture� 009785� 3/4" Dia. .032 Hole�

Short Range Upright� 990100�Standard Upright� 990110�Mid Range Upright� 990120�Long Range Upright� 990130�

Additional Components�

Short Range Sight� Standard Range Sight�

Mid Range Sight�

Long Range Sight�


®�Marble Arms�


A�

Installing a tang-mounted peep sight on a rifle is a simple “do it yourself” project for any shooter with a few basic tools. It is best if you clamp the rifle in�a cradle or gun vise. Remove the tang screw, making sure that you use a screwdriver with a blade designed for use on firearms that correctly fits the�slot in the screw. Do not use a standard screwdriver, as the tapered sides can cause the screwdriver to ride out of the slot and damage the screw and�the rifle. Remove any other screws attaching the buttstock and then remove the stock.�

Place the sight on the tang and install the longer tang screw supplied with the rear sight in the hole and tighten enough to hold the sight, but also to�allow it to move when tapped gently with a plastic hammer. Be careful, as some imported rifles use metric threads that are very close to the U.S (English)�standard threads used in the United States, but are not interchangeable. The screw can be forced, but it will damage the rifle and the screw. When in�doubt, double check everything with a thread pitch gauge and a dial caliper to insure the screw is correct for the thread in the rifle. Never force a screw,�it should turn in easily. If it does not, there is a reason.�

Center the free end of the sight base on the tang by tapping it gently with a plastic hammer or with a hammer and a nylon or brass punch. The human�eye is a very good tool to insure that the sight is centered on the tang. Just make sure that the lighting is even on both sides. You can confirm that the�sight is centered by measuring on each side from the edge of the tang to the edge of the sight. The depth function on a dial caliper works very well for�this.�

Mark the tang in the exact center of the hole with a center punch by tapping it with a small hammer. Again, the human eye is a very good indicator of�center. It is best if one person holds the punch while another checks the center from several angles.�

Remove the tang screw and remove the sight. Clamp the rifle in a vise with padded jaws and mounted on a drill press. Chuck the proper size drill bit�for the screw you will be installing in the drill press. Make sure to match the drill size to both the screw size and the thread pitch. For example, the 10-32�screw used on the majority of rifles will require a #21 drill. Keep in mind that the screw hole you will be threading may be different than the thread used�in the existing screw holes in the gun.�

Make sure that the tang is square and level to the drill and that the drill is lined up exactly with the punch mark in the tang. If the drill table is correctly�leveled and the chuck is properly squared to it, you can align the tang using a small level. Level the tang and then index off the receiver with a vertical�reading level to make sure the gun is square to the drill. You can drill the gun with a hand held drill if you do not have a drill press, but it’s a poor second�choice. It helps to have one person hold the drill while another checks visually from several angles to insure the drill bit is straight and square with the�tang.�

This is the part where you modify the rifle, so check and recheck until there is no doubt it is correct. When you are certain, carefully drill through the�tang, using the mark from the center punch as a guide to start the drill. Be sure to apply plenty of cutting oil during the drilling process.�

Select the correct tap for the screw supplied with the sight and install the tap in a tap handle. Make certain that the tap is square with and centered in�the drilled hole and that you have applied plenty of cutting oil. Carefully turn the tap clockwise to cut the new threads. Reverse the tap often to clear the�chips. Reapply the oil often. The tap should turn easily and cut cleanly. If it binds or chatters, stop; something is wrong. Do not force it as taps are very�brittle and can break easily if misused.�

After you have the thread cut through the full depth of the hole, remove the tap. Wipe the tang clean of cutting oil and chips. Degrease the threads.�Install the butt stock and put the sight in place. Replace the tang screw, but do not tighten. A drop of blue Loctite on the threads of each screw before�installing them will help ensure that the screws stay tight. Install the front screw, but do not tighten. Return to the rear tang screw and snug it tight. Then�tighten the front sight screw.�

If the gun has an existing rear sight, use a brass or nylon punch and a small hammer to remove the open sight from its dovetail. Drive it from left to right.�Install a Marbles dovetail slot blank by tapping it into place with a brass or nylon punch, right to left, until centered.�

If you use a brass punch it may leave “tracks” on the metal. Remove this brass smear with copper removing bore solvent on a cotton patch.�

The front sight may need to be exchanged for one that is that is higher or lower. Drive the existing sight out of the dovetail left to right and drive the new�one in right to left.�

If the front sight or the dovetail slot blank will not start or is a very tight fit, the dovetail may need to be modified slightly. Use a parallel side, three corner,�safe file designed for this work. A safe file has only one side that cuts, with the other two being smooth. Make a very light pass with the file and check�the fit. Remember, you can’t replace metal after you remove it, so work very slowly and check often. Finish by turning the file at an angle to put a very�slight bevel on the edge to help start the sight or dovetail slot blank.�

The sight is now installed. All that is needed is to zero the gun at the shooting range. Note that there are several screw in apertures shipped with your�sight. The smaller the aperture hole, the more precise the sight will be. Smaller apertures are excellent for target shooting or sighing in, the larger�apertures work better for hunting.�

Sighting in is easiest if you start with a large target at relatively close range; 25 yards is excellent. This helps to insure that the bullet impacts are on the�target. Fire three shots and measure the distance from the center of the group to the center of the aiming point, both vertically and horizontally.�

When adjusting the rear sight always move the sight in the direction the bullet impact needs to move on the target. If the bullet is hitting low, move the�rear sight up. If the impact is to the left, move the rear sight to the right, etc. The Marbles Tang sight is moved up or down by twisting the knurled vertical�section directly under the aiming aperture, clockwise moves the sight and the point of impact up, counterclockwise moves it down. Horizontal or windage�adjustments are made by turning the knurled knob on the right side of the sight. Clockwise moves the sight to the right and counter-clockwise moves it�left. With both adjustments, one click equals one minute of angle. So, each inch of movement at 25 yards will require four clicks. At one hundred yards,�each click will move the point of impact one inch. Once zeroed at 25 yards, move the target to the distance desired for the final zero and repeat the�process to fine tune.�

Tools needed for installing tang sight.�

•Center Punch�•Hammer�•Dial caliper�•Vise�•Drill Press (or handheld drill)�•Tap & tap handle�•Cutting oil�•Loctite�

Installing Marble’s�®� Tang Sight�By Bryce M. Townsley�

Tools needed for installing a front sight�and/or dovetail slot plug�

•Hammer�•Brass or nylon punch�•Three corner “safe file” with parallel sides�

Catch .22 Demonstration Video Available at: www.marblearms.com�420 Industrial Park Gladstone MI 49837 • Phone: 906-428-3710 • Fax: 906-428-3711�

catch�.22�

Storage Dispenser�™�

“W�hen I was allowed to shoot my dad's .22 rifle at the age of nine years, I underwent a serious�program of the dos and don'ts of gun handling. Part of my training involved the proper handling of .22�rimfire ammunition. I was a little disturbed when told to discard and never use any ammo that had been�dropped on the ground. Dad explained how .22 ammunition was outside lubricated and the oily residue on�the bullets would pick up all kinds of stuff that could be harmful to the bore when it was fired. I was also�instructed never to carry bullets loose in my pockets for the same reasons. The Catch .22 keeps the ammo�clean and ready to use without worrying about the contamination."�

– Designer Blackie Collins�

•The fastest, easiest way to load�tubular magazine .22 rifles�•Keeps .22 shells clean and safe, which�in turn keeps your rifle clean and safe�•Designed by world-renowned�craftsman Blackie Collins�

Part # 000960�

D�iscover a safer, more convenient way to carry .22 ammunition.�Brand new to the market, the Catch .22 storage dispenser allows 50 rounds�of .22LR cartridges to clip right to your belt or pocket for quick access.� The Catch .22 is an easy way to speed-load tubular magazine rifles.� Convenient and fun to use, the Catch .22 eliminates the need to�juggle flimsy factory cardboard boxes. It prevents contamination from dust�or debris that may stick to lubricated bullets and damage the bore of your�firearm. The Catch .22 organizes bullets in ten staggered holes containing�five bullets each. Detents on the sliding lid allow you to access only the�bullets you need while remaining bullets are kept clean and secure. The�Catch .22 offers a great alternative for gun owners and parents who are�concerned with hunter safety.�

®�Marble Arms�


A�The Catch .22�


How to Use Table Above-Suppose a rifle, having a sighting radius of 24” between front sight and receiver sight, shoots 6” high at�100 yards, even with the rear sight adjusted as low as possible. Remove front sight and measure overall height, preferable with a�micrometer. This might be .410”, such as a Marble No. 41MR. Reference to columns for 24” and 6” on the table above will show a�necessary correction of .400”. This would mean a new, higher front sight (with an overall height of .410” plus .040” for a correction�height of .450”) such as a Marble No. 45MR, should be installed.�

Sighting in should be done with a bench rest or prone with a sand bag or other rest for the rifle. Do not put rifle barrel or forearm�directly on solid surface, but put the back of your hand or wrist on the rest and hold forearm of the rifle securely in your hand with�approximately the same tightness of grip you would use when shooting at running game. If the firearm or barrel is rested directly on�the sand bag or rest, the rifle will shoot higher than when held firmly while shooting at game as more “muzzle flip” will occur.�

Front Sight Elevation Correction Chart�

1. Measure the diameter of the barrel at the point of the rear sight�upright and at the point of front sight bead (example: 1.00” rear�sight and .750” front sight).�

2. Divide the diameters by 2 (example: 1.00” /2=.500”). This is�the distance from the center line of the barrel to the top of the�barrel.�

3. Check the rear sight height adjustment chart for the middle�adjustment height (example: Large Low #20 sight adjusts from�.420” to .520”). So .470” is the mid point.�

4. Add the mid point adjustment to the center line distance�(example: .470”+.500”=.970”).�

5. Subtract the front sight center line figure from the rear sight�height (example: .970”-.375”=.595”).�

6. You need a combination of front ramp and front sight with the�height of .595”. Ramps are measured from the base to the�bottom of the dovetails. Front sights are measured from the�bottom of the dovetail to the top of the bead.�

7. You can use a 3/8” traditional front sight ramp (height from�dovetail .285 and a 31 MR Marble’s front sight (.312”) which will�give you .597”.�

Calculating Rear & Front Sight Height Combination�

*1”� .0038� .0041� .0044� .0047� .0050� .0053� .0055� .0058� .0061� .0064� .0066� .0069� .0072� .0074� .0077� .0080� .0082� .0085� .0088� .0091� .0093�

*2”� .0078� .0083� .0089� .0094� .0100� .0105� .0111� .0116� .0122� .0127� .0133� .0138� .0144� .0149� .0155� .0160� .0156� .0171� .0177� .0182� .0188�

*3”� .0117� .0125� .0133� .0142� .0150� .0159� .0167� .0175� .0184� .0192� .0201� .0209� .0217� .0226� .0234� .0243� .0251� .0259� .0268� .0276� .0285�

*4”� .0155� .0167� .0178� .0189� .0200� .0211� .0222� .0234� .0244� .0255� .0266� .0278� .0289� .0300� .0311� .0322� .0333� .0344� .0355� .0366� .0377�

*5”� .0194� .0208� .0222� .0236� .0250� .0264� .0278� .0292� .0306� .0319� .0333� .0347� .0361� .0375� .0389� .0403� .0417� .0431� .0445� .0458� .0472�

*6”� .0233� .0250� .0267� .0283� .0300� .0317� .0333� .0350� .0367� .0384� .0400� .0417� .0434� .0450� .0467� .0484� .0500� .0517� .0534� .0551� .0567�

14”� 15”� 16”� 17”� 18”� 19”� 20”� 21”� 22”� 23”� 24”� 25”� 26”� 27”� 28”� 29”� 30”� 31”� 32”� 33”� 34”�Distance Between Front & Rear Sights�

*Amount of error at 100 yds given in inches�

®�Marble Arms�


A�Marble’s�®�Additional Information�

#009800-#009808 Peep Tang Sight Installation�

1. Sight in gun with factory sights to 100 yards�

2. Adjust peep tang sight so that you are in the middle of the adjustment- windage and elevation.�

3. Place peep tang sight on tang so that when looking through peep sight aperture, all sights are in alignment.�

4. Mark the holes-#009800 hole spacing is 2.185” center to center.�

5. Make sure you are center (left to right) on the tang.�

6. Remove stock and put gun in vise�

7. Center punch holes.�

8. Recheck for center alignment.�

9. Drill with undersize drill, in case you are not center. Drill size #32 or smaller for both holes.�

10. Now that you are center-drill with #21 drill bit and tap with a #10-32 tap.�

11. Keep chips from entering gun by using a heavy tap oil when tapping.�

12. Remove chips and mount sight.�

13. Some cases you may have to shorten the screws.�

14. Remove gun from vise and reinstall stock.�

Peep Tang Sight Maintenance & Care�

Windage adjustment has 66 clicks=.260”�

Elevation adjustment has 85 click=.335”�

Each click is about 1/4” of adjustment at 100 yards�

The further the target the smaller the aperture is recommended.�

To adjust windage, turn windage knob clockwise to move right and counter clockwise to move left.�

To adjust the elevation, turn elevation knob to left to move up and to the right to move down.�Never move tang fully forward or�damage will occur to sight.�

Company� Mode� Thread�Mossberg� 5-40�

Winchester� Mod 12� 2-56�(must be re-tapped to 3-56)�

Winchester� SX2� 3-56�

Ithaca� 37� 6-48�

Remington� Ivory Bead� 6-48 Over Sized�

Remington� Silver Bead� 6-48 OS (must drill & tap)�

Springfield/Savage/Stevens� 67� 2-56�(must be re-tapped to 3-56)�

Beretta� M2.5x.45 use 3-56�

Benelli� Citori� 3-56�

Browning� Gold� m3x.5�

Browning� A-5� m3x.5�

Ruger� Red label� 3-56�

H & K� m3x.5�

Shotgun Thread Size�Tap� Drill Size�

3x56� #45�

m3x.5� #41�

5x40� #38�

6x48� #36�

6x48OS� #32�

Drill and Tap Size�

Additional Information Con’t�


®�Marble Arms�


A�

Blue Ridge Knife Co.�166 Adwolfe Road�Marion VA 24354�276-783-6143�Fax: 276-783-9298�www.blueridgeknives.com�

Bowmac Gunpar, Inc.�69 Iber Rd., Unit 101�Stittsville, Ontario�K2S 1E7 Canada�800-668-2509�

Brownell’s, Inc.�200 South Front St.�Montezuma, IA 50171�800-741-0015,�Fax 641-623-3896�www.brownells.com�

Buffalo Arms Co.�660 Vermeer Court�Ponderay, ID 83852�208- 263-6953�Fax:208-265-2096�www.buffaloarms.com�

Cut Knife Distribution�Box 158 Cut Knife�SK SOM ONO Canada�306-398-2222�Fax: 306-398-2807�www.cutknifedistribution.ca�

Ellett Brothers�267 Columbia Ave.�Chapin SC 29036-0128�803-345-3751�Fax: 803-345-1820�www.ellettbrothers.com�

Evil Roy Shooting School�909 N. Hidden valley Circle�Durango CO 81301�970-385-4141�www.evilroyshootingschool.com�

Gander Mountain�www.gandermountain.com�

Jack First, Inc.�1201 Turbine Dr.�Rapid City SD 57701�605-343-9544�Fax: 605-343-9420�www.jackfirstgun.com�

Midway USA�MidwayUSA�Attention: Dealer Sales�5875 W. Van Horn Tavern Rd.�Columbia, MO 65203�800-243-3220�Fax: 800-992-8312�[email protected]�www.midwayusa.com�

Numrich Gun Parts Corporation�Gun Parts Corporation�226 Williams Lane, PO Box 299�West Hurley, NY 12491�845-679-2417�866-686-7424�Fax: 845-679-5849�www.e-gunparts.com�

S.I.R. Mailorder�1300 Ellice Ave.�Winnipeg, Manitoba R3G Canada�204-788-4867�Fax: 204-786-8964�www.sirmailorder.ca�

Smoky Mountain Knife Works�2320 Winfield Dunn Parkway�Sevierville TN 37876�865-428-8102�Fax: 865-428-5991�www.eknifeworks.com�

UTAS�1247 Rand Road�Des Plaines IL 60016�847-768-1000�Fax: 847-768-1001�

Marble’s�®�Distributors�

marble arms catalog

Documents