marathon tt&r glove selection guide · 2014. 3. 20. · marathon tt&r glove selection guide...

502.774.6541 - [email protected]

www.orrsafety.com

Marathon TT&R Glove Selection Guide


Place orders through Orr Safety Catalog on e-procurement,or call: 502.774.6541 or email: [email protected]

2

Glove Style Page #

General Purpose

Chemical/Immersion

Chemical/Splash Cut Cut and

PunctureCut and

Chemical Cold

Weather Impact

ResistantElectrical/Arc Flash

Drivers/Asphalt

Ansell Hyflex 3 X

Orr Brand Mechanics 3 X

Mechanix M-Pact 4 X

Gripster Sports Plus 4 X X

Ansell Alphatec 5 X

Black Lightning Disposable Nitrile 5 X

Orr Brand 8 Mil Disposable Nitrile 6 X

ANSI 5 Kevlar/Steel Cut Resistant with Nitrile Coated Palm

7 X

Chrome Series 360 Mecanics 7 X

HexArmor Mechanics+ 8 X X

Green Nitrile with Kevlar Liner 8 X X

Ultra Tech Cut/Splash 8 X X

Ansell ThermaKnit Insulator 9 X

Ansell Winter Monkey Grip 9 X X X

Orr Brand Mechanics - Insulated/Waterproof 10 X X

KONG Glove 11 X X X

Electrical/ARC Flash 12 X

Special Purpose 13-15 X

Marathon TT&R Glove Selection Guide Matrix


2014 - Marathon TT&R Glove Selection Guide

3

Ansell HyFlex Palm coated nitrile glove with patented Ansell Grip Technology on fine gauge liner. Good for handling small parts, oil grip & dry grip.

Orr Part # Description Marathon PriceEDM119206 Size 6 $2.93/pairEDM119207 Size 7 $2.93/pairEDM119208 Size 8 $2.93/pairEDM119209 Size 9 $2.93/pairEDM1192010 Size 10 $2.93/pairEDM1192011 Size 11 $2.93/pair

Orr Brand Mechanics

Mechanics Glove with Armor Skin Synthetic Leather. More abrasion resistant than same thickness of cowhide or pigskin. Pre-curved fingers for comfort and dexterity. Velcro closure to keep out debris. Neoprene knuckle to absorb shocks, breathable knit back, washable.

Orr Part # Description Marathon PriceORRFJ200BKS Small, Black $6.95/pairORRFJ200BKM Medium, Black $6.95/pairORRFJ200BKL Large, Black $6.95/pairORRFJ200BKXL X-Large, Black $6.95/pairORRFJ200BK2XL 2X-Large, Black $6.95/pair ORRFJ200HVOS Small, Hi-Vis Orange $6.95/pairORRFJ200HVOM Medium, Hi-Vis Orange $6.95/pairORRFJ200HVOL Large, Hi-Vis Orange $6.95/pair ORRFJ200HVOXL X-Large, Hi-Vis Orange $6.95/pair ORRFJ200HVO2XL 2X-Large, Hi-Vis Orange $6.95/pair ORRFJ200YWHVS Small, Hi-Vis Yellow $6.95/pairORRFJ200YWHVM Medium, Hi-Vis Yellow $6.95/pairORRFJ200YWHVL Large, Hi-Vis Yellow $6.95/pairORRFJ200YWHVXL X-Large, Hi-Vis Yellow $6.95/pairORRFJ200YWHV2X 2X-Large, Hi-Vis Yellow $6.95/pair

GENERAL PURPOSE – USES – Climbing tanks, Floor sweeping, valve turning, tool carrying, taking out the trash, or any other normal everyday task.

To order, call:

800-669-1677

www.orrsafety.com

Now Available in HI-VISIBILITY Orange!

Now Available in HI-VISIBILITY Orange!

Ordering Information

ORRFJ200HVOS Velcro Wrist, Unlined, Hi-Vis Orange, Small ORRFJ200HVOM Velcro Wrist, Unlined, Hi-Vis Orange, Medium ORRFJ200HVOL Velcro Wrist, Unlined, Hi-Vis Orange, LargeORRFJ200HVOXL Velcro Wrist, Unlined, Hi-Vis Orange, X-LargeORRFJ200HVO2XL Velcro Wrist, Unlined, Hi-Vis Orange, XX-Large

UNLINED

ORR Brand Mechanics Glove ORR Brand Mechanics Glove

ARMOR SKIN™ -

Orr Brand mechanic style gloves offer a great combination of fit, feel and function along with excellent value for your dollar.

The ARMOR SKIN™ synthetic material has been proven by wear tests to be more abrasion-resistant than the same thickness of cowhide or pigskin. Features include pre-curved fingers for the ultimate in comfort and Velcro® wrist closure to keep out debris. Gloves are washable. Bright orange backing for maximum visibility.

Size range is Small – 2XL.

Abrasion Test Results

Pig 1600 Rubs

Cowhide 1850 Rubs

ARMOR SKIN 1900 rubs

High Quality at Factory-Direct

Pricing!

New Product for 2009

New Product for 2009



4

GENERAL PURPOSE – USES – Climbing tanks, Floor sweeping, valve turning, tool carrying, taking out the trash, or any other normal everyday task.

Gripster Sports Plus Cut Resistant Mechanics

Mechanics Style Glove with Arelene fibers for high 360 degree cut resistance. Vel-cro closure, high vis orange back with 3M reflective. Polyurethane reinforced palm for grip and silicone dot fingertips. Excellent dexterity and cut protection. ANSI Cut Level 4.

Orr Part # Description Marathon PriceGGSSG8800KEVM Medium $ 13.42/pairGGSSG8800KEVL Large $ 13.42/pairGGSSG8800KEVXL X-Large $ 13.42/pair

Mechanix M-Pact

Mechanics glove with rubberized grip on thumb, index finger and palm. Sonic welded molded rubber on knuckles and fingertips. Poron XRD foam underneath palm to absorb shock and vibration associated with repetitive tasks. Double stitching and dual panels in critical wear areas. Trek Dry spandex top and hook and loop closure for a secure fit.

Orr Part # Description Marathon PriceMXWMPT58008 Small $24.33/pairMXWMPT58009 Medium $24.33/pair MXWMPT58010 Large $24.33/pairMXWMPT58011 X-Large $24.33/pairMXWMPT58012 XX-Large $24.33/pair



5

CHEMICAL RESISTANT - IMMERSION – USES –Parts cleaning machines, parts cleaning buckets (garages), Asphalt strainer basket cleaning and other tasks where you immerse your hands in chemcials

Ansell AlphaTEC

12” Supported nitrile glove with patented Ansell Grip Technology. A nitrile layer filled with microscopic channels that transfer oils and lubricants away from griping surface. Consis-tent polymer coating significantly reduces the likelihood of chemical leakage. Unique com-bination of grip, chemical resistance and superior comfort, tactility and dexterity.

Orr Part # Description Marathon PriceEDM585308 Size 8 $4.72/pair EDM585309 Size 9 $4.72/pair EDM5853010 Size 10 $4.72/pairEDM5853011 Size 11 $4.72/pair

Black Lightning Disposable Nitrile – Powder Free

9-1/2” Disposable Powder Free Black Nitrile, Latex Free, Textured Grip, Ambidextrous. Unique formulation reduces excess perspiration. Quadruple washed, no excess chemicals lingering on the glove. Super strength and stretch – no more tearing. Box of 100.

Orr Part # Description Marathon PriceATPBLS Size Small $12.87/boxATPBLM Size Medium $12.87/boxATPBLL Size Large $12.87/boxATPBLXL Size X-Large $12.87/boxATPBLXXL Size XX-Large $12.87/box



6

CHEMICAL RESISTANT - SPLASH – USES –Taking samples, working in testing rooms, performing drain down, and other task that could have potential chemical splashing hazards.

Orr Brand 8 Mil Disposable Nitrile Gloves

9-1/2” Disposable 8 mil Blue Nitrile, latex free, smooth fingertips, ambidextrous. 8 mil thickness offers wearer increased barrier and puncture protection over 4 mil disposable nitrile gloves, while still offering tactility and dexterity. Available lightly powdered for easier donning and doffing, or powder free. Box of 50.

Orr Part # Description Marathon PricePowder Free ORRFF11008PFS Size Small $6.34/box ORRFF11008PFM Size Medium $6.34/boxORRFF11008PFL Size Large $6.34/box ORRFF11008PFXL Size X-Large $6.34/boxORRFF11008PFXXL Size XX-Large $6.34/box

Lightly PowderedORRFF11008S Size Small $5.99/boxORRFF11008M Size Medium $5.99/boxORRFF11008L Size Large $5.99/boxORRFF11008XL Size X-Large $5.99/box



7

CUT RESISTANT – USES –Working with any metal or signage: Garages/Operations, tossing scrap in dumpsters, cutting (making) gaskets, changing tool blades or cutting wheels, or any other tasks that could have a potential cut hazard.

ANSI 5 Kevlar/Steel Cut Resistant with Nitrile Coated Palm

10 Gauge Kevlar/Steel Cut Resistant Glove with Extended Cuff. Microfoam Nitrile Palm Coat for excellent grip and abrasion resistance. High Level of Dexterity. ANSI Cut Level 5

Orr Part # Description Marathon PriceWCM710KSSNS Small $ 7.74/PairWCM710KSSNM Medium $ 7.74/PairWCM710KSSNL Large $ 7.74/PairWCM710KSSNXL X-Large $ 7.74/Pair

HexArmor Chrome Series 360* Mechanics

SuperFabric brand material provides 360* cut resistance. 20 times more cut resistant then leather gloves. Oil resistant synthetic leather palm with PVC print enhances grip in dry and light oil applications while providing dexterity. Cut and abrasion resistant knuckle patch. Elastic Cuff with Velcro closure for a secure fit. Launderable. ANSI Cut Level 5

Orr Part # Description Marathon PricePFF4023S Small $ 26.88/pairPFF4023M Medium $ 26.88/pairPFF4023L Large $ 26.88/pairPFF4023XL X-Large $ 26.88/pairPFF4023XXL 2X-Large $ 26.88/pair

HexArmor Chrome Series 360* Mechanics - Impact Protection

SuperFabric brand material provides 360* cut resistance. 20 times more cut resistant then leather gloves. Oil resistant synthetic leather palm with PVC print enhances grip in dry and light oil applications while providing dexterity. Back of the hand impact protection to dissipate forceful blows over a large area. Padded palm reduces vibration damage while returning a higher level of comfort. Elastic cuff with Velcro closure for a secure fit. Launderable. ANSI Cut Level 5

Orr Part # Description Marathon PricePFF4025S Small $ 36.21/PairPFF4025M Medium $ 36.21/PairPFF4025L Large $ 36.21/PairPFF4025XL X-Large $ 36.21/PairPFF4025XXL 2X-Large $ 36.21/Pair



8

Green Nitrile with Kevlar Liner

13” Unsupported Green Nitrile for chemical and protection with Kevlar liner for cut protection. Raised diamond pattern for extra grip. ANSI cut level 2. For chemical immersion and cut resistance.

Orr Part # Description Marathon PriceGGS515KEVM Size Medium $5.77/pairGGS515KEVL Size Large $5.77/pairGGS515KEVXL Size X-Large $5.77/pair

UltraTech Cut/Splash

Red Nitrile fully coated on seamless synthetic fiber/fiberglass 10 gauge shell. ANSI Cut Level 3. For chemical splash and cut resistance.

Orr Part # Description Marathon PriceMEM9683CSS Size Small $64.39/dozen MEM9683CSM Size Medium $64.39/dozen MEM9683CSL Size Large $64.39/dozenMEM9683CSXL Size X-Large $64.39/dozenMEM9683CSXXL Size XX-Large $64.39/dozen

CUT & PUNCTURE RESISTANT – USES-Handling steel cables and dock lines, hose handling (asphalt rail lines with braided hoses), changing out riser hoses at LP load racks, repairing loading hoses, and any other task that could have a cut and puncture hazard.

CUT & CHEMICAL RESISTANT – USES –Tank gauging, working on additive lines, valves, or solenoids at the rack, and any other task that could have cut and chemical hazards.

HexArmor Mechanics+

Mechanics style glove with synthetic leather palm that enhances grip in dry and light oil applications, while providing dexterity to utilize tools and equipment. SuperFabric brand material for the highest level of cut resistance, Level 5. Puncture protection from wires, metal, wood and glass on the palm, thumb and knuckle area. Washable.

Orr Part # Description Marathon PricePFF4018S Size Small $28.82/pair PFF4018M Size Medium $28.82/pair PFF4018L Size Large $28.82/pairPFF4018XL Size X-Large $28.82/pairPFF4018XXL Size XX-Large $28.82/pair



9

COLD WEATHER – USES –Snow removal task, river task, transport task, or any other general purpose task that is performed in cold weather.

Ansell Winter Monkey Grip

PVC coated glove with foam insulation for cold temperatures and wet conditions. Curved fingers, wing thumb and jersey liner for comfort. PVC stays soft even when cold. Available smooth grip with safety cuff, rough grip with safety cuff and smooth grip fully coated 12”. Size 10 only. Good for drivers and those handling petroleum based materi-als in cold conditions or mild heat conditions.

Orr Part # Description Marathon PriceEDM2319310 Smooth Grip with Safety Cuff $ 7.09/PairEDM2317310 Rough Grip with Safety Cuff $ 7.66/PairEDM2315210 Smooth Grip Fully Coated 12” $ 9.57/Pair

Ansell ThermaKnit Insulator

Insulator glove to use as a liner for protection in cold temperatures. To be worn under primary glove.

Orr Part # Description Marathon PriceEDM78101PR Thermal Knit Insulator $2.34/pair



10

Orr Brand Mechanics - Insulated and Waterproof

Mechanics Glove with Armor Skin synthetic leather. More abrasion resistant than same thickness of cowhide or pigskin. Pre-curved fingers for comfort and dexterity. Velcro closure to keep out debris. Neoprene knuckle to absorb shocks. PVC patch-es on fingertips and thumb. PVC palm patch with double break points to prevent “bunching of the glove in the palm area. PVC palm patches are lined with neoprene padding for impact reduction. Triple sewn in high wear/stress areas. PVC slip resistant tool grip on the work area of the index finger, Neoprene knuckle to absorb shocks, washable.

Orr Part # Description Marathon PriceHeatlok Lined AND WaterproofORRFJ210WPBKS Size Small $14.45/pairORRFJ210WPBKM Size Medium $14.45/pairORRFJ210WPBKL Size Large $14.45/pairORRFJ210WPBKXL Size X-Large $14.45/pairORRFJ210WPBK2X Size 2X-Large $14.45/pair

COLD WEATHER – USES –Snow removal task, river task, transport task, or any other general purpose task that is performed in cold weather.



11

IMPACT RESISTANT– USES –Garage work, rail car hatch opening, handling heavy parts or pipe, use of hand tools in tight areas, or any other tasks that could involve impact to the hand.

KONG Glove

Reduces if not eliminates hairline fractures, bruising blows and pinched fingers caused by impact. Offers back of hand, knuckle, finger and thumb protection with impact ab-sorbing Thermoplastic Rubber. Machine Washable. Available in Original with high de-gree of dexterity, Super Dexterity with single layer palm with silicone grip and improved dexterity, or Cold Weather with 100% waterproof and windproof breathable membrane and comfortable inner lining that keeps hands warm down to 20 degrees F.

Orr Part # Description Marathon PriceOriginalIPWSDX02S Size Small $27.71/pairIPWSDX03M Size Medium $27.71/pair IPWSDX04L Size Large $27.71/pair IPWSDX05XL Size X-Large $27.71/pairIPWSDX06XXL Size XX-Large $27.71/pairIPWSDX07XXXL Size XXX-Large $27.71/pair

Super Dexterity IPWSDXG02S Size Small $26.92/pair IPWSDXG03M Size Medium $26.92/pairIPWSDXG04L Size Large $26.92/pair IPWSDXG05XL Size X-Large $26.92/pair IPWSDXG06XXL Size XX-Large $26.92/pair

Cold WeatherIPWSDXW03M Size Medium $38.47/pairIPWSDXW04L Size Large $38.47/pairIPWSDXW05XL Size X-Large $38.47/pairIPWSDXW06XXL Size XX-Large $38.47/pair

NEW - Cut Resistant Kong is ANSI Cut Level 4IPWSDXC02S Size Small $0.00/pairIPWSDXC03M Size Medium $0.00/pair IPWSDXC04L Size Large $0.00/pairIPWSDXC05XL Size X-Large $0.00/pairIPWSDXC06XXL XX-Large $0.00/pairIPWSDXC06XXL XX-Large $0.00/pair



12

Class 00 Glove Kit

Kit contains 1 pr. Class 00 11” Black Electrical Gloves, 1 pr. Goatskin Glove Protectors and 1 ea. Nylon Glove Bag

Orr Part # Description Marathon PricePIP150SK008 Size 8 $63.87/each PIP150SK009 Size 9 $63.87/eachPIP150SK0010 Size 10 $63.87/eachPIP150SK0011 Size 11 $63.87/eachPIP150SK0012 Size 12 $63.87/each

Class 00 11” Black Electrical Gloves

Orr Part # Description Marathon PricePIP15000118 Size 8 $40.93/pairPIP15000119 Size 9 $40.93/pair PIP150001110 Size 10 $40.93/pairPIP150001111 Size 11 $40.93/pairPIP150001112 Size 12 $40.93/pair

Glove Protectors for 11” Class 00 Gloves

Orr Part # Description Marathon PricePIP14810008 Size 8 $12.80/pairPIP14810009 Size 9 $12.80/pair PIP148100010 Size 10 $12.80/pairPIP148100011 Size 11 $12.80/pairPIP148100012 Size 12 $12.80/pair

ELECTRICAL GLOVES

Class 00 11” Length Max Use Voltage 500V AC/750V DC

ELECTRICAL/ARC FLASH– USES –Testing electrical equipment, verification of power, or any other task that presents an electrical/Arc Flash hazard.



13

SPECIAL PURPOSE - DRIVERS / ASPHALTUSES – See each glove for special use

Ansell Winter Monkey Grip

Uses – Transport drivers and those handling petroleum based materials and hoses, collecting samples in asphalt or any other task that could involve the handling of cold or warm materials.

PVC coated glove with foam insulation for cold temperatures and wet conditions. Curved fingers, wing thumb and jersey liner for comfort. PVC stays soft even when cold. Available smooth grip with safety cuff, rough grip with safety cuff and smooth grip fully coated 12”. Size 10 only. Good for drivers and those handling petroleum based materials in cold conditions or mild heat conditions.

Orr Part # Description Marathon PriceEDM2319310 Smooth Grip with Safety Cuff $ 7.09/PairEDM2317310 Rough Grip with Safety Cuff $ 7.66/PairEDM2315210 Smooth Grip Fully Coated 12” $ 9.57/Pair

****Not intended for immersion in hot products****

35 oz Zetex Plus Mitten or Glove

Uses – Handling testing room supplies and equipment that are extremely hot, up to 1800 degrees for short duration, or any other task that could involve the handling of extremely high temperature items. 35 oz. Zetex Plus treated Fiberglass double layer 14” glove or mitten. Moderate abra-sion resistance.

Orr Part # Description Marathon Price HOL174ZP 14” 35 oz. Zetex Plus Mitten $28.50/PairHOL234ZP 14” 35 oz. Zetex Plus Glove $33.15/Pair



14

SPECIAL PURPOSE - DRIVERS / ASPHALTUSES – See each glove for special use

Orr Brand Split Leather Drivers Gloves, Lined and Unlined

Uses –Cleaning around lines/valves/flanges, emptying sample buckets or any other task that could involve coming in contact with cooled asphalt/emulsion. Split cowhide drivers style glove with shirred wrist for snug fit. Unlined version is se-lect pearl shoulder split leather with keystone thumb. Lined version is tan color split leather with straight thumb and white thermal lining.

UnlinedOrr Part # Description Marathon Price ORRFB505M Size Medium $ 20.92/DozenORRFB505L Size Large $ 20.92/DozenORRFB505XL Size X-Large $ 20.92/Dozen

LinedOrr Part # Description Marathon Price ORRFB505LM Size Medium $ 38.72/DozenORRFB505LL Size Large $ 38.72/DozenORRFB505LXL Size X-Large $ 40.32/Dozen

NOTE: Not for use in light products, Asphalt only.

Orr Brand Hot Mill Glove

Uses - Handling testing room samples or equipment that are hot, up to 250 degrees F, or any other task that could involve the handling of high temperature items. 24 oz. 100% cotton double layer nap out hot mill glove with band top cuff. Double layer offers comfort and good heat dispersion

Orr Part # Description MarathonPrice ORRFI24BPR 24 oz. Hot Mill Glove with $ 1.71/Pr. Band Top Cuff, Mens



15

SPECIAL PURPOSE - DRIVERS / ASPHALTUSES –See each glove for special use

Full Leather with Gauntlet Cuff

Uses – Cleaning heat traced lines/valves/flanges, or any other task were you could come into brief contact with heated lines or warm asphalt/emulsion. Select Shoulder Split Cowhide Full Leather Back Glove with 4-1/2” Rubberized Gauntlet Cuff. Cotton Lined Palm for extra comfort.

Orr Part # Description Marathon Price PIP5066M Size Medium $ 2.28/PairPIP5066L Size Large $ 2.28/PairPIP5066XL Size X-Large $ 2.28/Pair

NOTE: Not for use in light products, Asphalt only.

NOTE:This is not an all inclusive list for drivers and asphalt, other gloves in this program could be applicable depending on the work task.



16

Kevlar Sleeves

100% 2-Ply Kevlar Sleeves offer great cut, abrasion, and heat resistance. 3” Wide for snug and comfortable fit. ANSI Cut Level 3

Orr Part # Description Marathon PriceORRKS10TH 10” Length with Thumb Hole $ 1.54/EachORRKS14TH 14” Length with Thumb Hole $ 1.84/EachORRKS18TH 18” Length with Thumb Hole $ 2.33/EachORRKS24 24” Length $ 2.83/Each

GLOVE ACCESSORIES

Glove Guard Glove Clips

Non-conductive - no metal parts to conduct electricity, rust or corrode. Break-away center - helps prevent individual from be-ing pulled into machinery if gloves are caught. Improves hand safety by keeping gloves close at hand - ready to use when and where they are needed. Lightweight - only 3/4 oz. and moves freely out of the way in both standing and sitting positions. Engineered grade material - holds its memory with a tight grip that resists flex fatigue in all types of weather. Small end of

Glove Guard® - attaches to belt loop or directly to clothing, including one piece coverall suits. Large end - attaches to a variety of glove sizes and other articles such as utility bags, cloth sleeve protectors, mechanic towels, ear muffs, etc

Orr Part # Description Marathon PriceGFS1939BE Blue $3.60/eachGFS1939BK Black $3.60/eachGFS1939GN Green $3.60/eachGFS1939YW Yellow $3.60/each



17

2014

TT&R Glove Request Form This form allows TT&R employees the ability to request gloves that are currently not in the program. Please fill out the form completely and submit to Joseph Herbert [email protected] or the current glove program owner. Attach any photos or additional information as needed.

General Information: Requested by: Requested date: Location (terminal/group): Phone Number:

Glove Request Section:

Manufacturer: Product Name: Model #: Link to glove(if available):

Style and or use: (circle all that apply) General purpose Chemical Immersion Chemical Splash Cut Cut & Puncture Cut & Chemical Cold Weather Impact Electrical/Arc Flash Drivers Asphalt Special Purpose Other

Reason for request: (Please note the task you need the glove for, the glove you are currently using for the task, why this glove is a better choice, and any other important information. Attach any photos or additional information as needed. )

Glove Approval Section: Responses will be sent back to requester in a timely manner.

Approved Denied Approver: Date: Reason approved or denied:



18

NOTES



19

HOW TO ORDER

1. Orr Safety e-catalog on e-procurement

2. Contact Orr Safety Customer Service

Contact – Ginger Hines Fax: 800.800.6774 Phone: 502.774.5791 Email: [email protected]

Need assistance with glove selection?Contact Orr Safety Account Manager Marla Hejma

Phone: 513-910-9799Email: [email protected]

For guidance on glove use outside of this program please contact your local HES professional, all other suggestion or inquiries should

be sent to Joseph Herbert.

Prices are current as of 1/1/2014 and are subject to change.

502.774.6541 - [email protected]

www.orrsafety.com

marathon tt&r glove selection guide · 2014. 3. 20. · marathon tt&r glove selection guide...

Documents