maps ims brochure - gl communications inc · pdf filesip/ims registration & call control...

5
Document Number: PKS127-6.11.25-01 818 West Diamond Avenue - Third Floor, Gaithersburg, MD 20878, U.S.A (Web) http://www.gl.com/ - (V) +1-301-670-4784 (F) +1-301-670-9187 - (E-Mail) [email protected] Simulates any Interface in the IMS Network Complete End-to-End Solution Cx/Dx, Rx, Gx, Gm, Mw, SGi, Mi, Mj, Ro, & Rf LTE IMS Network Interface Test each IMS Network Elements Independently Multi Interface Simulating Online & Offline Systems Integrate Testing with Other Networks (2G, 3G, 4G or PSTN) Simulate Multiple UEs Simulates both User Plane and Control Plane Customized Call Scenarios Cost Effective Solution Overview GLs MAPSSIP IMS test suite provides an advanced full-fledged network environment that enables user to test their applicaons, devices, and services prior to deployment on a real-me network. It can be used to simulate all or specific elements within IMS network infrastructure using simple ready-to-use testbed setup. The network architecture shown above outlines the IMS Core Network elements which can be simulated using GL's MAPSSIP IMS test tool. MAPSSIP IMS test suite is capable of simulang mulple UEs and IMS core elements such as P- CSCF, I-CSCF, S-CSCF, PCRF, MGCF which provides the IMS core network. With the help of mobile phones, and other simulated wireless networks, the VoLTE Lab setup can be operated in real-me for making Voice calls over LTE and also for interworking with PSTN and VoIP networks. It includes ready-to-use scripts, as per IETF specificaon. Test scripts include general messaging and call flow scenarios for mulmedia call session setup and control over IP networks. Logging and pass/fail results are also reported. Test cases verify conformance of acons such as registraon, call control, proxies and other servers. For more details, refer to hp://www.gl.com/maps-ims-network-simulator.html MAPSIMS Test Suite Main Features Simulates P-CSCF, I-CSCF, S-CSCF, PCRF, HSS, BGCF, MGCF elements in LTE IMS network supporng Cx/Dx, Rx, Gx, Gm, Mw, SGi, Mi, and Mj interfaces Simulate mulple UEs Supports IMS mul interface configuraon simulang end-to-end Online and Offline charging procedures Supports both signaling and traffic simulaon (RTP from simulated UE's and GTP from Real UE's) between any two IMS nodes Supports simulaon of core network, access network, roaming architecture, interworking with other networks Complete IMS lab for End to End test soluon Test environment allows user to test each IMS network elements independently using single interface simulaon or mul interface simulaon Any of the network element within the lab environment can be replaced by DUT to test parcular node working Integrate IMS core network easily with 2G, 3G, 4G or any PSTN networks to test any call scenario using remote MAPS Build customized call scenarios as MAPSprovides complete script based soluon Test any applicaons and services using IMS core network Remotely control/monitor all the interwork interfaces and elements using Remote MAPS applicaon

Upload: phungdiep

Post on 31-Jan-2018

222 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: MAPS IMS Brochure - GL Communications Inc · PDF fileSIP/IMS Registration & Call Control Procedure elow diagram shows the Registration flow at S-SF which handles SIP Registrations

Document Number: PKS127-6.11.25-01

818 West Diamond Avenue - Third Floor, Gaithersburg, MD 20878, U.S.A

(Web) http://www.gl.com/ - (V) +1-301-670-4784 (F) +1-301-670-9187 - (E-Mail) [email protected]

Simulates any Interface in the IMS Network

Complete End-to-End Solution

Cx/Dx, Rx, Gx, Gm, Mw, SGi, Mi, Mj, Ro, & Rf LTE IMS Network Interface

Test each IMS Network Elements Independently

Multi Interface Simulating Online & Offline Systems

Integrate Testing with Other Networks (2G, 3G, 4G or PSTN)

Simulate Multiple UEs

Simulates both User Plane and Control Plane

Customized Call Scenarios

Cost Effective Solution

Overview

GL’s MAPS™ SIP IMS test suite provides an advanced full-fledged network environment that enables user to test their applications, devices, and services prior to deployment on a real-time network. It can be used to simulate all or specific elements within IMS network infrastructure using simple ready-to-use testbed setup.

The network architecture shown above outlines the IMS Core Network elements which can be simulated using GL's MAPS™ SIP IMS test tool.

MAPS™ SIP IMS test suite is capable of simulating multiple UEs and IMS core elements such as P-CSCF, I-CSCF, S-CSCF, PCRF, MGCF which provides the IMS core network. With the help of mobile phones, and other simulated wireless networks, the VoLTE Lab setup can be operated in real-time for making Voice calls over LTE and also for interworking with PSTN and VoIP networks. It includes ready-to-use scripts, as per IETF specification. Test scripts include general messaging and call flow scenarios for multimedia call session setup and control over IP networks. Logging and pass/fail results are also reported. Test cases verify conformance of actions such as registration, call control, proxies and other servers.

For more details, refer to http://www.gl.com/maps-ims-network-simulator.html

MAPS™ IMS Test Suite

Main Features

Simulates P-CSCF, I-CSCF, S-CSCF, PCRF, HSS, BGCF, MGCF elements in LTE IMS network supporting Cx/Dx, Rx, Gx, Gm, Mw, SGi, Mi, and Mj interfaces

Simulate multiple UEs

Supports IMS multi interface configuration simulating end-to-end Online and Offline charging procedures

Supports both signaling and traffic simulation (RTP from simulated UE's and GTP from Real UE's) between any two IMS nodes

Supports simulation of core network, access network, roaming architecture, interworking with other networks

Complete IMS lab for End to End test solution

Test environment allows user to test each IMS network elements independently using single interface simulation or multi interface simulation

Any of the network element within the lab environment can be replaced by DUT to test particular node working

Integrate IMS core network easily with 2G, 3G, 4G or any PSTN networks to test any call scenario using remote MAPS™

Build customized call scenarios as MAPS™ provides complete script based solution

Test any applications and services using IMS core network

Remotely control/monitor all the interwork interfaces and elements using Remote MAPS™ application

Page 2: MAPS IMS Brochure - GL Communications Inc · PDF fileSIP/IMS Registration & Call Control Procedure elow diagram shows the Registration flow at S-SF which handles SIP Registrations

Document Number: PKS127-6.11.25-01

818 West Diamond Avenue - Third Floor, Gaithersburg, MD 20878, U.S.A

(Web) http://www.gl.com/ - (V) +1-301-670-4784 (F) +1-301-670-9187 - (E-Mail) [email protected]

Page 2

Call from UE1 in ATT Network to UE2 in the Same Network

Call from UE1 in ATT Network to UE2 in PSTN Network

Supported procedures

IMS Registration via SIP interface (with AKA Authentication, with Digest authentication) over TCP/UDP

IMS Registration from Visited Network

Mobile induced deregistration - SIP

SIP Audio Call from Non Roaming user to Non Roaming user across the network

SIP Audio Call from Non Roaming user to Non Roaming user on the same network

SIP Audio Call from Roaming user to Non Roaming user across the network

SIP Audio Call from Roaming user to Non Roaming user on the same network

Call from IMS to PSTN

Registration and IMS call with Signalling Compression (sigcomp)

Page 3: MAPS IMS Brochure - GL Communications Inc · PDF fileSIP/IMS Registration & Call Control Procedure elow diagram shows the Registration flow at S-SF which handles SIP Registrations

Document Number: PKS127-6.11.25-01

818 West Diamond Avenue - Third Floor, Gaithersburg, MD 20878, U.S.A

(Web) http://www.gl.com/ - (V) +1-301-670-4784 (F) +1-301-670-9187 - (E-Mail) [email protected]

Page 3

SIP/IMS Registration & Call Control Procedure

Below diagram shows the Registration flow at S-CSCF which handles SIP Registrations for ATT Network interacting with I-CSCF and HSS. And the Call flow at I-CSCF interacting with S-CSCF of ATT Network, and HSS and S-CSCF of Verizon Network.

Figure: End-to-end Registration & Call Control Procedures

Remote MAPS Server

The Remote MAPS Server feature within MAPS™, is a client server module, designed for multi-node multi-interface simulation. In IMS network, MAPS™ can be configured to simulate multiple nodes situated at various locations, which can be controlled using a single Remote Client GUI. The client application connects to the server and remotely accesses the MAPS™ functionalities simulating the configured nodes. The client communicates with the remote MAPS™ Server via the Listener running at the server location.

Figure: Remote MAPS Server Configuration

Call between UEs in different networks

The following network is an illustration of a Call simulation from Non Roaming User to another Non Roaming User across different LTE – IMS Network (UE1 in ATT network to UE2 in Verizon network).

Page 4: MAPS IMS Brochure - GL Communications Inc · PDF fileSIP/IMS Registration & Call Control Procedure elow diagram shows the Registration flow at S-SF which handles SIP Registrations

Document Number: PKS127-6.11.25-01

818 West Diamond Avenue - Third Floor, Gaithersburg, MD 20878, U.S.A

(Web) http://www.gl.com/ - (V) +1-301-670-4784 (F) +1-301-670-9187 - (E-Mail) [email protected]

Page 4

End-to-End Online and Offline Charging Simulation

The IMS network architecture outlining the IMS Core Network elements interconnected with SIP elements can be simulated using GL's MAPS™ IMS Multi Interface test tool.

MAPS™ IMS Multi Interface is designed to simulate end-to-end Online and Offline Charging procedures. This above setup depicts MAPS™ CSCF Multi-Interface node configured to handle end-to-end charging procedures.

MAPS™ S-CSCF Multi Interface node interacts with the MAPS™ SIP (UEs) receiving the request and responding using SIP protocol. Registration and Authentication of the UEs is performed at MAPS™ HSS. And MAPS™ S-CSCF interacts with the OCF for processing Online charging procedure and with the OFCS for processing Offline charging procedure. MAPS™ Diameter is configured as the charging systems (OCS and OFCS) for Rf and Ro (DCCA) interfaces.

Session based Online & Offline Charging Procedure Typical Online Credit Control Procedure

Page 5: MAPS IMS Brochure - GL Communications Inc · PDF fileSIP/IMS Registration & Call Control Procedure elow diagram shows the Registration flow at S-SF which handles SIP Registrations

Document Number: PKS127-6.11.25-01

818 West Diamond Avenue - Third Floor, Gaithersburg, MD 20878, U.S.A

(Web) http://www.gl.com/ - (V) +1-301-670-4784 (F) +1-301-670-9187 - (E-Mail) [email protected]

Page 5

Buyer’s Guide

PKS127 - MAPS™ SIP-IMS Text IP

PKS301 - MAPS™ IMS Multi Interface (S-CSCF)

Related Software

PKS120 - MAPS™ SIP

PKS139 - MAPS™ Diameter Emulator

PKS126 - MAPS™ SIP-I

PKS122 – MAPS™ MEGACO

PKS124 - MAPS™ MGCP

PKS135 - MAPS™ ISDN-SIGTRAN (ISDN over IP)

PKS130 - MAPS™ SIGTRAN (SS7 over IP)

PKS140 - MAPS™ LTE - S1 Interface

PKS142 - MAPS™ LTE- eGTP (S11, S5/S8) Interfaces

PKS164 - MAPS™ UMTS – IuPS (over IP) Interface Emulation

PKS160 - MAPS™ UMTS – IuCS and IuH Interface Emulation

Supported Protocol Standards

Supported Protocols Standard / Specification Used

SIP RFC 3261

SIP Extensions

RFC 3262 - Reliability of Provisional Responses in the Session Initiation Protocol (SIP)

RFC 3311 - The Session Initiation Protocol (SIP) UPDATE Method

RFC 3455 - Private Header (P-Header) Extensions to the Session Initiation Protocol (SIP) for

the 3rd-Generation Partnership Project (3GPP)

RFC 3515 - The Session Initiation Protocol (SIP) Refer Method

RFC 3310 - HTTP/SIP Digest Authentication Using Authentication and Key Agreement (AKA)

RFC 3263 - Session Initiation Protocol (SIP): Locating SIP Servers

Diameter

RFC 3588 - Diameter Base Protocol

S6a, S6d, S13 - 3GPP TS 29.272 V10.3.0

Rx - 3GGP TS 29214-b10

Cx/Dx - 3GPP TS 29.228 & TS29.229

Gx - 3GPP TS 29.212 & TS 23.203

Buyer’s Guide...

PKS102 - RTP Soft Core for RTP Traffic Generation

PKS103 - RTP IuUP Softcore

PKS107 - RTP EUROCAE ED137

PKS108 - RTP Voice Quality Measurements

PKS106 - RTP Video Traffic Generation

PKS200 - RTP Pass Through Fax Emulation

ETH100 - Packet Traffic Simulation - GTP

ETH101 - Mobile Traffic Core-GTP

ETH102 - Mobile Traffic Core-Gateway

ETH103 - Mobile Traffic - Gb

For complete list of MAPS™ products, refer to http://www.gl.com/maps.html webpage.