manufacturing & warehouse led lighting

15
Bay Star LED

Upload: tom-knoblock

Post on 01-Apr-2016

241 views

Category:

Documents


0 download

DESCRIPTION

 

TRANSCRIPT

Bay Star LED

pe

DESCRIPTION

DATASHEET 05.06.2014Specifications and dimensions subject to change without notice

High Bay LED Luminaire195 W / 19,100 Lumens

ENERGY DATA

347-480

213

19,100

90

5000

70 min

>200,000

90,000

-40 to 40

-40 to 20

The Bay Star LED luminaire from US LED is a perfect solution for high ceiling environments. The fixture can be suspended for easy adaptation with a typical mounting height of 20 - 40 feet. Designed to illuminate area features with sharp, accurate color to increase security and visibility, the Bay Star is cost effective to install and will replace conventional fluorescent, HPS and metal halide lighting.

FEATURESRemarkable light output using only 195 Watts

Class 2 compliant design (low voltage, limited power)

L70 lifetime of >200,000 hours*

Luminaire is IP65 compliant (when used with PUG Power Unit)

Protective coating added to resist corrosion

5-year warranty

l

l

l

l

l

l

SPECIFICATIONS

Dimensions (in)

Units/carton

Net weight

47.7 x 11.3 x 4.7

1

22 lbs

CERTIFICATIONl

l

l

l

Input Voltage (VAC)

System Level Power (W)**

Delivered Lumens (Lm)

System Efficacy (Lm/W)**

Color Temperature (K)

Color Rendering Index

L70 Calculated Life (Hrs)*

L85 Calculated Life (Hrs)*

PUF Driver Operating Temp (ºC)

PUG Driver Operating Temp (ºC)

120 - 277

195

19,100

98

5000

70 min

>200,000

90,000

-40 to 40

-40 to 20

UL approved

DesignLights Consortium qualified

NSF compliant (when used with PUG Power Unit)

LM-79 available

FIXTURE ORDERING INFORMATIONExample: LBX1-0-H-50

LBX1 0 H 50

Series

LBX1

Color Temp (K)

50 5000K

Variant

0 Black

Pattern

H High Bay

PUF 0 UNV1- (120-277 VAC) 7140 Open, Power Unit Damp

PUG 0 UNV1- (120-277 VAC) 7140 NSF, Power Unit Wet

POWER UNIT INFORMATION

SeriesDrive CurrentVoltage

Example: PUG-0-UNV1-7140

Variant Description

BAY STAR

Tandem Mount Kit LBTM-0 Black Wet

Occupancy Sensor Kit* LBOS-0 Black Damp

Conduit Mounting Kit* LBCM-0 Black Damp

Step-down Transformer Kit* LBXF-0 Black Damp(480/347 to 277 VAC)

ACCESSORIES

Kit ColorSeries

* Not to be used with PUG Power Unit

Environmental Rating

Wet

** Measured at 277VAC

Environmental Rating

Environmental Rating

* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

Troffer Luminaire2’ x 2’ Troffer, Medium Flux

53 W / 5250 Lumens

ENERGY DATA

CCT (K)

Input Voltage (VAC)

System Level Power (W)**

Delivered Lumens (Lm)

System Efficacy (Lm/W)**

Color Rendering Index

L70 Calculated Life (Hrs)*

L85 Calculated Life (Hrs)*

Operating Temp (ºC)

4000

120 - 277

53

4800

91

80 min

>200,000

136,000

-30 to 45

L-Grid3 is an LED troffer luminaire designed for installation in 2-foot by 2-foot conventional suspend-ed grid ceilings for new construction or retrofit projects. Featuring superior, evenly dispersed lighting that sets the standard in performance for solid state ceiling luminaires, L-Grid3 can also significantly reduce the number of fixtures needed to light a given area. Custom fixture and power supply kit design allows for quick and easy installation, reducing costly labor time. The superior thermal design will extend both the life of the fixture and power supply. And by still emitting 70% of the original light output after more than >200,000 hours*, L-Grid3 will last many years without the need for costly replacement or maintenance.

FIXTURE ORDERING INFORMATIONExample: GTR3-22-50-1-2-2-2-2

SPECIFICATIONS

Dimensions (in)

Units/carton

Net weight (without battery backup)

Net weight (with battery backup)

Environmental Rating

23.75 x 23.75 x 3.44

1

TBD lbs

TBD lbs

Dry

GTR3 22 1 2

Series Size

GTR3 22 2’ x 2’

Color Temp (K)

1 Standard Efficiency

FEATURES

Phenomenal light output using only 53 Watts

Sealed, type Non-IC fixture

Class 2 compliant design (low voltage, limited power)

L70 lifetime of more than >200,000 hours*

Fixture dimmable via Mark 7 (0-10V) dimming interface

5-year warranty

l

l

l

l

l

l

3500

120 - 277

53

4700

90

80 min

>200,000

136,000

-30 to 45

Type

35 3500K

40 4000K

50 5000K

CERTIFICATION

UL pending

NSF pending

CEC pending

LM-79 pending

l

l

l

l

Diffuser

1 Flat

2 Volumetric

Driver

1 AC Driver

Flux Level

2 Medium

Battery Backup

1 No Battery

2 With Battery

5000

120 - 277

53

5250

100

80 min

>200,000

136,000

-30 to 45

** Measured at 277VAC

* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

2 Lamp T12 U - 90 watts 14,000 life

Standard Flux also available - Delivered Lumens 3450 3500 3850

Project

Catalog #

Type

Specifications and dimensions subject to change without notice. DATASHEET 05.05.2014

DESCRIPTION

Designer Troffer Luminaire2’ x 4’ Troffer, Medium Flux

45 W / 4050 Lumens

L-Grid2 2x4 is an LED troffer luminaire designed for installation in 2-foot by 4-foot conventional suspended grid ceilings for new construction or retrofit projects. Featuring superior, evenly dispersed lighting that sets the standard in performance for solid state ceiling luminaires, L-Grid2 2x4 can also significantly reduce the number of fixtures needed to light a given area. Custom fixture and power supply kit design allows for quick and easy installation, reducing costly labor time. The superior thermal design will extend both the life of the fixture and power supply. And by still emitting 70% of the original light output after more than 173,000 hours*, L-Grid2 2x4 will last many years without the need for costly replacement or maintenance.

FIXTURE ORDERING INFORMATION

PUB UNV2 1670 (Dimming)

PUB UNV4* 1670 (Battery Backup)

FEATURES

Phenomenal light output using only 45 Watts

Sealed, type Non-IC fixture

Class 2 compliant design (low voltage, limited power)

L70 lifetime of more than 173,000 hours*

Fixture dimmable via Mark 7 (0-10V) dimming interface

5-year warranty

l

l

l

l

l

l

SPECIFICATIONS

Dimensions (in)

Units/carton

Net weight

Environmental Rating

47.7 x 23.7 x 5.1

1

22.8 lbs

Dry

POWER SUPPLY INFORMATION

Series Drive Current

Type

ADAPTER KIT

Series

CK-24 - Standard Kit

Example: GTR2-14-50-0-CK-24

GTR2 14 0

Series Size

GTR2 14 1’ x 4’

Color Temp (K)

0 Standard

Diffuser

35 3500K

40 4000K

50 5000K

NOTE: Luminaire requires ordering fixture, power supply and adapter kit.

ENERGY DATA CCT (K)

Input Voltage (VAC)

System Level Power (W)**

Delivered Lumens (Lm)

System Efficacy (Lm/W)**

Color Rendering Index

L70 Calculated Life (Hrs)*

L85 Calculated Life (Hrs)*

Operating Temp (ºC)

4000/5000

120 - 277

45

4050

90

80 min

173,000

79,000

-30 to 50

3500

120 - 277

45

3800

84

80 min

173,000

79,000

-30 to 50

CERTIFICATION

UL Listed (UL 1598, file #: E344008)

DesignLights Consortium qualified

CEC approved

C-Tick certified

LM-79 available

l

l

l

l

l

** Measured at 277VAC

* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

* Not DesignLights Consortium qualified

MAX12208

Luminaire Ordering Information:

E

Lighting layouts and spacing criteria available upon request

6” New Construction and Remodel LED Downlight Fixtures

COMPLIANT RoHS

Revised: 06-01-14

Watts Order Number Model Number Lumens CRI L70 Lifetime

(Hours)Fixture Dimensions

(W”x H” x L”) CCT

14 71781 RF614ICAT30W 900 85 50,000 7.6 x 7.5 x 10.4 3000

14 71783 RF614ICAT50W 1000 85 50,000 7.6 x 7.5 x 10.4 5000

14 71787 RFR614ICAT30W 900 85 50,000 6.1 x 7.5 x 12.8 3000

14 71789 RFR614ICAT50W 1000 85 50,000 6.1 x 7.5 x 12.8 5000

MaxLite’s LED downlights are great energy efficientsolutions for recessed lighting applications. The newconstruction and remodel fixtures have beenengineered to make installation in grid ceilings anddry wall ceilings a snap. Each recessed fixture issupplied with a performance-leading LED moduleand white trim ring that installs flush to the ceiling.

A high performance LED array emits industry leadinglumen output, high CRI (85), and still delivers extendedlifetime in excess of a 50,000 L70 measurement.

FEATURES:• Fully dimmable down to 10 percent• High lumen transmission and diffusing for even illumination• CRI: >85• Suitable for dry and wet locations• Airtight rated — meets airtight requirements for 2.0 CFM or less air leakage

• Rated for direct insulation contact• Supplied with internal thermal protection• Universal voltage 120-277 volt• Power factor: >.9• Beam angle: 90 degree• Available in 3000K and 5000K

CONSTRUCTION:• New construction housing includes 13” hanger bars, supplied with pre-installed nails: just hammer and go

• Impact-resistant plastic lens• Housing and trim are gasketed to maximize building energy efficiency• Hanger bars feature notches for easy installation to grid ceilings, which can be secured using wire or screws

• Remodel housing includes three push out mounting clips for easy installation• Recessed housing is aluminum; new construction frame is steel

RF614ICAT30W

RFR614ICAT30W

SPECIFICATIONS:

Spacing Criteria

Color Temperature

Lumens Delivered

Efficacy

Color Consistency

Lumen Maintenance (L70)

Dimensions (W” x H” x L”)

Weight

Housing

Lens

Mounting

Operating Temperature

Certification

Material Usage

Environment

Warranty

Specification

Available upon request

3000K 5000K

900 1000

64 lm/w 71 lm/w

7.6” x 7.5” x 10.4”

Hanger bars for joists or grid ceilings

Available upon request

3000K 5000K

900 1000

64 lm/w 71 lm/w

6.1” x 7.5” x 12.8”

Mounting clips

Item

Certification

Lighting layouts and spacing criteria available upon request

RF614ICAT30W RF614ICAT50W RFR614ICAT30W RFR614ICAT50W

GeneralPerformance

Physical

6” New Construction and Remodel LED Downlight Fixtures

COMPLIANT RoHS

Revised: 06-01-14

120V Approved Dimmers

- Lutron: NovaT (Ntelv300 & 600)Diva (Dvelv-300P & 303P)

- Leviton: Acenti: Ate06-1LwTrimatron: 703W

Consult tech. service or factoryfor additional dimmers

RF614ICAT30W

RFR614ICAT30W

Dimensions

12.75”

6.12”Width of inner can

7.5”

10.37”

7.63”

7.5”

ApprovedDimmers

Proprietary binning for uniform color

50,000 Hours

1 lb.

Aluminum

Polycarbonate

-4˚F to 113˚F

ETL, LM-79, LM-80

RoHS compliant; no mercury

Indoor/Outdoor

5 Years

Illumination • Long lasting, efficient ultra-bright white LEDs.• Mirror-bright reflector and prismatic polycarbonate refractor.

Electrical • Dual 120V / 277V.• Charge rate/power “ON” LED indicator light and push to test switch for mandated code compliance testing.• LVD (low voltage disconnect) prevents battery from deep discharge.• Long-life, maintenance-free, rechargeable NiCd battery.• Internal solid-state tranformer switch automatically connects the intenal battery to LED board for 90-minute emergency illumination.• Fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours.

Mounting • Surface mount via easy connect back plate fits most standard size junction boxes and snaps into place making internal electrical connections.

Construction• Decorative, low-profile, architectural design.• Die-cast aluminum housing.• Durable powder coat finishes in white, black and dark bronze.• Sealed and gasketed.

Warranty/Listing • 5 Year warranty on all electronics and housing. Batteries pro-rated for five years.• UL listed standard for wet locations (0º-40ºC/32ºF-104ºF). CW options UL listed for wet locations (-20º-50ºC/-4º-122ºF).• Meets UL924, NFPA101 Life Safety Code, NEC, OSHA, Local and State Codes.

Features and Benefits:

Catalog Number

Notes Type

Wet Location Rated Emergency Decorative Unit Specification

Decorative Emergency Unit 120 or 277 Voltage, Wet Location

Warranties & Compliances:

WLBSDT

WLBRSDT

WLWSDT

WLBSDTCW

WLBRSDTCW

WLWSDTCW

Black

Bronze

White

Black

White

Bronze

Wet Location, Die Cast Emergency Light, Black STD, LED

Wet Location, Die Cast Emergency Light, Bronze, STD, LED

Wet Location, Die Cast Emergency Light, White, STD, LED

Wet Location, Die Cast Emergency Light, Black STD, LED, Cold Weather

Wet Location, Die Cast Emergency Light, Bronze, STD, LED, Cold Weather

Wet Location, Die Cast Emergency Light, White, STD, LED, Cold Weather

REMOTE HEADS LED EXITS

REMOTE HEADS LED EXITS – COLD WEATHER

Item # DescriptionHousing

Color

Ordering Information:

Dimensions:

5YEARWARRANTY

Electronics/Housing

5YEARWARRANTY

Battery Pro-Rated

initiator:[email protected];wfState:distributed;wfType:email;workflowId:7d24c7e4db5e4a9c94b3aaa732ef46bb

Features and Benefits:

Catalog Number

Notes Type

120 or 277 Voltage, Damp Location

Warranties & Compliances: TCP Part # Description

Ordering Information:

Accessories

Dimensions:

25YEARWARRANTY

LED Strip

5YEARWARRANTY

Electronics

1YEARWARRANTY

Sealed Lead Acid

7YEARWARRANTY

Ni-Cad Battery

LED Color Housing Color AC/BBUP

All LED Emergency Exit Combo Unit

All LED Combo Exit Signs

• 120/277 VAC dual voltage operation

• LVD (Low Voltage Disconnect) prevents battery from deep discharge

• 7 year, maintenance-free Ni-Cad battery

• 90 minute run time in emergency mode

• Mounting canopy provided - top end or back mounting

• V-O flame retardant

20684 LED Exit EMG Combo, Red Letters, White Housing Red White BBUP20685 LED Exit EMG Combo, Green Letters, White Housing Green White BBUPLED20723 LED Combo Universal Face, Red Letters, White Housing Red White BBUPLED20725 LED Combo Universal Face, Green Letters, White Housing Green White BBUPLED20784B LED Combo Universal Face, Red Letters, Black Housing, Remote Capable Red Black BBUPLED20785B LED Combo Universal Face, Green Letters, Black Housing, Remote Capable Green Black BBUPLED20784 LED Combo Universal Face, Red Letters, White Housing, Remote Capable Red White BBUPLED20785 LED Combo Universal Face, Green Letters, White Housing, Remote Capable Green White BBUPLEDRWRCSD LED,Compact Red Combo White Housing Remote Capable Self Diagnostic Red White BBUPLEDGWRCSD LED,Compact Green Combo White Housing Remote Capable Self Diagnostic Green White BBUPLEDBUGRW LED BugEye Combo Red Letters with White Housing Red White BBUPLEDBUGGW LED BugEye Combo Green Letters with White Housing Green White BBUPLEDBUGRWB LED BugEye Combo Red Letters with Black Housing Red Black BBUPLEDBUGGWB LED BugEye Combo Green Letters with Black Housing Green Black BBUP

20684/20685 20704 Canopy 206HDS Replacement Heads For ComboCOMBOWG Combo Wire Guard COMBOBG Combo Bubble Guard

LEDBUGRW/LEDBUGGW/LEDBUGRWB/LEDBUGGWB

20704 CanopyCOMBOWG Combo Wire Guard COMBOBG Combo Bubble Guard

LED20723/LED20785

20704 CanopyLEDRH1 LED Remote Head Single SDT LEDRH2 LED Double Remote Head SDT LEDRH1B LED Remote Head Single SDT Black LEDRH2B LED Double Remote Head SDT Black LEDRH1WLSDT Wet Location LED Single Head LEDRH2WLSDT Wet Location LED 2 Remote Head COMBOWG Combo Wire Guard COMBOBG Combo Bubble Guard

LEDGWRCSD

20704 CanopyCOMBOWG Combo Wire Guard COMBOBG Combo Bubble Guard LEDSNAPRH1 LED Single WH Remote Head Snap LEDSNAPRH2 LED Double Head Snap

11.75"

7.25"

2.5"

2.0"

1.75"1.0625"

1.75"

EXIT12.2"

7.48"

.32"

7.80"

12.2"

1.65"

20684

20684

LEDRWRCSD

LEDRWRCSD

LEDBUGRW

LEDBUGRW

LED20784

LED20784

EXIT17 8/9"

11 3/15" 2 "

7 1/5" 8 1/5"

4 1/3"

For the most up-to-date specs,

please visit www.tcpi.com

©TCP, Inc. MAY 2012/47898

TCP, Inc.325 Campus Dr. | Aurora, Ohio 44202 | P: 1-800-324-1496 | tcpi.com

Illumination• Long lasting, efficient ultra-bright white LEDs.• High-performance chrome-plated metalized reflector and polycarbonate lens for optimal light distribution.• Adjustable LED lamp heads increases center-to center spacing with 8 LEDs in each lamp head. Optional 12 LEDs per lamp head increases center-to center spacing to 18’.

Electrical• Dual 120V/277V.• Charge rate/power “ON” LED indicator light and push to test switch for mandated code compliance testing.• LVD (low voltage disconnect) prevents battery from deep discharge.• Long-life, maintenance-free, rechargeable NiCd battery.• Internal solid-state transformer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination.• Fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours.

Mounting• Surface mount via quick-connect back plate fits most standard size junction boxes and snaps into place make internal electrical connections.• Conduit mount knockout on top of housing.• Suitable for wall or ceiling mount.

Housing• Injection-molded, engineering-grade, V-0 flame retardant, high-impact, thermoplastic in white or black finish.

Warranty/Listing• Three year warranty on all electronics and housing. Batteries pro-rated for five years.• UL listed for damp locations (0°-50°C/32°F-122°F standard).• Meets UL924, NFPA101 Life Safety Code, NEC, OSHA, Local and State Codes.

Features and Benefits:

Catalog Number

Notes Type

LED Low Profile Thermoplastic Emergency Light Specification

LED Emergency Light 120 or 277 Voltage, Damp Location

Warranties & Compliances:

LEDWELLEDWELRCLEDWELSDTLEDWELRCSDT

White LED Emergency LightWhite LED Emergency Light Remote CapableWhite LED Emergency Light, Self Diagnostic TestWhite LED Emergency Light, White Remote Capable, Self Diagnostic Test

Item # Description

Acce

ssorie

s

WhiteWhiteWhiteWhite

Housing Color

WhiteWhiteWhiteWhite

LED Color

20760, 20761 2076520766SD20765,20766SD

LEDEL1SDTLEDEL2SDTLEDEL1SDTWLLEDEL2SDTWL

LED Emergency Lighting Remote Head Single, Self Diagnostic TestLED Emergency Lighting Remote Head Double, Self Diagnostic TestLED Emergency Lighting Single Remote Head Wet Location, Self Diagnostic TestLED Emergency Lighting Double Remote Head Wet Location, Self Diagnostic Test

WhiteWhiteWhiteWhite

WhiteWhiteWhiteWhite

207R1207R2

TCP TraditionalEquivalents

Ordering Information:

LED EMERGENCY LIGHTING – WHITE HOUSING

LED REMOTE HEADS – WHITE HOUSING

LEDEL1SDTBLEDEL2SDTBLEDEL1SDTWLBLEDEL2SDTWLB

LED Emergency Lighting Remote Head Single, Self Diagnostic TestLED Emergency Lighting Remote Head Double, Self Diagnostic TestLED Emergency Lighting Single Remote Head Wet Location, Self Diagnostic TestLED Emergency Lighting Double Remote Head Wet Location, Self Diagnostic Test

BlackBlackBlackBlack

WhiteWhiteWhiteWhite

LED REMOTE HEADS – BLACK HOUSING

LEDWELBLEDWELRCBLEDWELSDTBLEDWELRCSDTB

Black LED Emergency LightBlack LED Emergency Light Remote CapableBlack LED Emergency Light, Self Diagnostic TestBlack LED Emergency Light, White Remote Capable, Self Diagnostic Test

BlackBlackBlackBlack

WhiteWhiteWhiteWhite

20762,20763DLED EMERGENCY LIGHTING – BLACK HOUSING

Dimensions:

3YEARWARRANTY

Electronics/Housing

5YEARWARRANTY

Battery Pro-Rated

Acce

ssorie

s

14"

10" 3.5"

4.5"

www.atgelectronics.com Toll free: 877-461-5333 E-mail: [email protected]

S

iBright™

LED Vapor Proof Fixture

Model

VP4FT4K-00

VP4FT5K-00

VP5FT4K-00

VP5FT5K-00

Product Description

iBright™ LED Vapor Proof Fixture supports for pendant, ceiling and wall

mounting solutions which is more flexible and easy-to-install.

It has imaginative appearance and impressive uniformity and available in 4ft

and 5ft. The 5ft fixture can reach 5500 lm with only 60W power consumption

which is equal to 2 to 3 pcs LED tubes.

iBright™ LED Vapor Proof Fixture is widely used for ambient lighting

application like parking lots, gas stations, tunnels, warehouses and more.

Performance Summary

Length: 4ft, 5ft

Power consumption: 50W, 60W

Luminous efficacy: Typ. 85+ lm/W

Lumens: 4300 lm, 5500 lm

CCT: 4000 K, 5000 K

CRI: >80

PF>0.92/ THD<20%

Project

Catalog #

Type

Specifications and dimensions subject to change without notice. DATASHEET 05.06.2014

DESCRIPTIONThe QubeLot2 evenly illuminates walkways, streets and parking areas. The classic design of this lumi-

naire seamlessly blends into all forms of architecture. Highly efficient and long-lasting, the QubeLot2

is an ideal replacement for HID. Exceptional high-brightness LEDs result in higher light levels and

significant energy savings. High-efficiency 5200K LEDs mounted to a metal-core circuit board and

aluminum heat sink, ensure optimal thermal management and long life (L85 124,000 hrs).

FEATURES AND SPECIFICATIONSType 5 medium light distribution and Type 2 medium distribution pattern available

Comes fully equipped with power supply

Bi-level light option available for dimmed-down lower power operation

EPA rating of fixture is 0.7/sq ft and mount is 0.13/sq ft

5-year warranty

ENERGY DATAInput Voltage (V AC)

System Level Power (W)

Delivered Lumens (Lm)

System Efficacy (Lm/W)

Correlated Color Temp (K)

L70 Calculated Life (hrs)*

L85 Calculated Life (hrs)*

Minimum CRI

Operating Temperature (°C)

120 - 480

136

12,300

90

5200K

289,000

124,000

65

-40 to 45

Parking Lot Luminaire4-Qube

QubeLot2

SPECIFICATIONSDimensions (in)

Units/carton

Net Weight

Environmental Rating

25.2 x 12.7 x 3.3

1

16 lbs

Wet

ORDERING INFORMATION

QL2 1 52

Series Light DistPattern

# ofQubes

Color Temp

QL2 1 52 5200K

Example: QL2-1-UNVL-4-5M-52-0

Input Voltage

5M 5 Medium

2M* 2 Medium

UNVL 120-277

UNVH* 277-480

Options

0 0-10V Dimming

1 Photocell Socket

2 **DynaDimmer

3 **Photocell Socket & DynaDimmer

Variant

3

4

* Not DesignLights Conortium qualified** Note: Options 2 and 3 not available with UNVH Input Voltage

ENERGY DATAInput Voltage (V AC)

System Level Power (W)

Delivered Lumens (Lm)

System Efficacy (Lm/W)

Correlated Color Temp (K)

L70 Calculated Life (hrs)*

L85 Calculated Life (hrs)*

Minimum CRI

Operating Temperature (°C)

120 - 480

104

9300

89

5200K

289,000

124,000

65

-40 to 45

SPECIFICATIONSDimensions (in)

Units/carton

Net Weight

Environmental Rating

25.2 x 12.7 x 3.3

1

14.5 lbs

Wet

l

l

l

l

l

3-QUBE 4-QUBE

CERTIFICATIONUL Listed USA and Canada File# E338791

DesignLights Consortium qualified

l

l

* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

Horizontal mounting only

Project

Catalog #

Type

Specifications and dimensions subject to change without notice. DATASHEET 05.16.2014

| | | | |

2-Qube Flood Light Fixture

ORDERING INFORMATION

QF2 5M 52

Series Color Light DistPattern

CurrentColorTemp

QF2 52 5200K

Example: QF2-1-UNVL-5M-52-700

DESCRIPTIONQubeFlood2 is a flood light LED luminaire designed to be mounted vertically or horizontally in

outdoor applications. High-performance LEDs provide light where you need it, at a fraction of the

operating cost of HID technologies. With a lifetime of more than >200,000 hours*, QubeFlood2 is the

ideal replacement for 250W metal halide fixtures. Slip-fitter, Pole Mount or Trunnion Mount options are

available for easy and fast installation.

FEATURESSlip-fitter, Pole Mount and Trunnion Mount options available

Type 5M light distribution pattern

5-year warranty

l

l

l

QubeFlood2

CERTIFICATIONUL Listed USA and Canada File # E338791

DesignLights Consortium qualified

LM-80

LM-79

l

l

l

lENERGY DATAInput Voltage (V AC)

System Level Power (W)**

Delivered Lumens (Lm)

System Efficacy (Lm/W)**

Correlated Color Temp (K)

L70 Calculated Life (hrs)*

L85 Calculated Life (hrs)*

Minimum CRI

Operating Temperature (°C)

SPECIFICATIONSDimensions

Units/carton

Net Weight

Environmental Rating

14.25” x 14.25” x 3.75”

1

11 lbs

Wet

High Flux

120-277

105

8100

77

5200K

>200,000

122,000

70

-40 to 40

UNVL 120-277

UNVH* 277-480

700* Standard Flux

1000† High Flux

* Not DesignLights Consortium qualified† Special order, not stocked†† 120/277VAC only

1 Bronze

2 White ††

3 Black ††

** Measured at 277VAC

* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

5M

Standard Flux

120-277/277-480

70

6250

89

5200K

>200,000

124,000

70

-40 to 40

Project

Catalog #

Type

Specifications and dimensions subject to change without notice.PRELIMINARY DATA

DATASHEET 04.23.2014

2-Qube Flood Light Fixture

ORDERING INFORMATION

QF3 50

Series Color Light DistPattern

CurrentColorTemp

QF3 50 5000K

Example: QF3-1-UNVL-5M-50-1050

DESCRIPTIONQubeFlood3 is a flood light LED luminaire designed to be mounted vertically or horizontally in

outdoor applications. High-performance LEDs provide light where you need it, at a fraction of the

operating cost of HID technologies. With a lifetime of more than >200,000 hours*, QubeFlood3 is the

ideal replacement for 250W metal halide fixtures. Slip-fitter, Pole Mount or Trunnion Mount options are

available for easy and fast installation.

FEATURESSlip-fitter, Pole Mount and Trunnion Mount options available

Type 3M, 5M and lambertian light distribution pattern

5-year warranty

l

l

l

QubeFlood3

CERTIFICATIONUL pendingl

ENERGY DATAInput Voltage (V AC)

System Level Power (W)**

Delivered Lumens (Lm)

System Efficacy (Lm/W)**

Correlated Color Temp (K)

L70 Calculated Life (hrs)*

L85 Calculated Life (hrs)*

Minimum CRI

Operating Temperature (°C)

SPECIFICATIONSDimensions

Units/carton

Net Weight

Environmental Rating

14.25” x 14.25” x 3.75”

1

11 lbs

Wet

120-277/277-480

96

10,300

107

5000K

>200,000

182,000

70

-40 to 40

UNVL 120-277

UNVH 277-480

1050 Standard Flux

† Special order, not stocked

1 Bronze

2 White †

3 Black †

** Measured at 277VAC

* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

5M

3M

12 Lambertian

Project

Catalog #

Type

Specifications and dimensions subject to change without notice. DATASHEET 04.04.2014

6-Qube Area Light Fixture

ORDERING INFORMATION

QD1 50 6

Series Color Light DistPattern

# of QubesColorTemp

QD1 50 5000K

Example: QD1-1-UNVL-5M-50-6-0

DESCRIPTIONThe Dorado 6-Qube is an LED luminaire designed to be mounted vertically or horizontally in outdoor

applications. High-performance LEDs provide light where you need it, at a fraction of the operating

cost of HID technologies. With a lifetime of more than 200,000 hours*, the Dorado is the ideal

replacement for 1000W metal halide fixtures. Slip-fitter, Pole Mount or Trunnion Mount options are

available for easy and fast installation.

FEATURESSlip-fitter, Pole Mount and Trunnion Mount options available

Three light distribution patterns: Type 5M, Type 3M, and 120° angle

5-year warranty

l

l

l

Dorado

CERTIFICATIONUL approved (#E338791)

LM-80 pending

LM-79 pending

l

l

l

ENERGY DATAInput Voltage (VAC)

System Level Power (W)**

Delivered Lumens (Lm)

System Efficacy (Lm/W)**

Correlated Color Temp (K)

L70 Calculated Life (hrs)*

L85 Calculated Life (hrs)*

Minimum CRI

Operating Temperature (°C)

SPECIFICATIONSDimensions

Units/carton

Net Weight

Environmental Rating

23.3” x 21.0” x 7.1”

1

26 lbs

Wet

** Measured at 277 VAC

120-277/347-480

288

30,800

107

5000K

>200,000

182,000

70

-40 to 40

UNVL 120-277

UNVH 347-480

6 6-Qubes

† Special order, not stocked

1 Bronze

2 White †

3 Black †

5M

3M

12

Options

0 None

1 Photocell Socket

Voltage

* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

www.atgelectronics.com Toll free: 877-461-5333 E-mail: [email protected]

Product Description

eLucent™ WP Series LED Wall pack is designed for applications that require

lighting with a long life and low maintenance requirement.

With effective thermal management, corrosion-resistant, and die-cast

aluminum enclosure with an architectural dark brown finish, eLucent™ WP

Series LED Wall provides glare free, uniform illumination while providing a

safe and comfortable visual experience.

eLucent™ WP Series LED Wall pack adopts high luminous efficacy SMD

LEDs. They are available in 40 watts, 60 watts and 90watts.

With superior 60%-90% energy savings, compared to halogen lamp or a metal

halide lamp, eLucent™ WP90 achieves a superlative luminous flux of 8500 lm

and only consumes approximate 90 watts.

High lumen output, energy-efficient optical control and easy universal

installation features confirm the eLucent™ WP Series LED Wall as the

absolute choice for indoor and outdoor illumination.

eLucent™

WP Series LED Wall Pack

Performance Summary

Power consumption 40W 60W 90W

Lumens 4000 lm 6000 lm 8500 lm

PF/THD >0.9/<15% >0.9/<20% >0.9/<20%

CCT: 5700 K

Color Accuracy: CRI 85, R9>20

L70 lifetime: 130,000h

W WWP

W

WPFC40

W

WPFC60 & WPFC90

W

WP0040

W

WP0060 & WP0090

Family Model

WPFC40 WP0040

WPFC60 WP0060

WPFC90 WP0090

WPFC Series WP00 Series WPDS SeriesDark Sky Compliant Dark Sky Compliant