manual trolleys

8/11/2019 Manual Trolleys

http://slidepdf.com/reader/full/manual-trolleys 1/52

WELCOME

TOPRASHANT



PRASHANT FERBER

COMPLETE RANGE

OFMANUAL

WARP BEAM TROLLEYS



PRASHANT FERBER MOTTO

SERVING GLOBAL TEXTILE INDUSTRY

BY OFFERING WORLD CLASS

LOGISTIC SOLUTION

AT INDIAN PRICE



Benefits of Ferber

Reduced Breakages & MishandlingReduced Labor CostsReduced Compensation ClaimsEnhanced ProductivityImproved SafetyIncreased Reliability

Efficient Space Utilization



Material & Components

Steel = TATA / SAILGrade = C-15

Critical Comp = EN SeriesHydraulics Pump = Rexorth (Germany)

Hose Pipe = Paker(USA)

Wheels = Tente(Germany)

Bearing = SKF / FAG



CSV / TC SLM / CR AFL



CR AFLHM / CR /ACF-B / TRMSTK-DN / ES-03



CMR – FABRIC ROLL STORAGE VR134/ VR 154



CSV & CSV-AS

To carry Empty Beam /or/ Small Fabric Roll



CSV-2/3 & CSV-2/3 AS

Specification:--

Beam/Roll Weight: 250 to 750 KgBeam Flange Dia.: Up to 1250 mmBarrel/Roll Length: Up to 4000 mmBarrel Dia.: 120 mm to 220 mm

Fabric Roll Dia.: Up to 450 mm



SALIENT FEATURESSAFE AND EASY TRANSPORT OF EMPTY BEAMS or SMALL

FABRIC ROLL

HYDRAULIC LIFTING AND LOWERING BY FOOT PUMP WITH

LOWERING VALVE

EXCELLENCE IN DESIGN HAVING CARRIAGE SWIVELS FROMCROSSWISE TO PARALLEL RESULTS IN

EASETRANSPORTATION IN NARROW PASSAGE

EASY MANEUVERABILITY BY 2 RUNNING WHEEL OF CENTER

OF WARP BEAM

TRANSPORTATION OF WARP BEAM SECURED BY CLAMPINGDEVICE.



CR AFLLoading and Unloading Trolley of Beams from

Looms



Technical Specs- CR AFLSpecification CR AFL 25 CRAFL 40

Beam Weight: 1000 Kg 1500 Kg

Beam Flange Dia : 800 mm to 1250 mm

Barrel Length: 2500 mm 4000mm

Barrel Dia : 120 mm to 220 mm



WORKING OPERATION – CR AFL

STEERING FROM BOTH SIDES BY BAR

FRONT WHEEL DRIVE HELPS EASYPOSITIONING AGAINST THE LOOM

HYDRAULIC LIFTING OF BEAM VIA FOOTPUMP

PRECISE LOWERING OF BEAM VIA VALVE FOR

EASE IN ADJUSTING TO OPERATING HEIGHT WHILE LOADING ON LOOM



CR AFL

STURDY ROBUST STRUCTURE

LARGE WHEELS ENSURE SMOOTH RUNNINGOF THE TROLLEY

HALF THE EFFORT REQUIRED TO PULL THETROLLEY COMPARE TO CONVENTIONALDESIGN

ADJUSTABLE CARRYING FORK ARMS



CR AFLHM

Loading of Beams with HarnessMounting Device



Technical Specs- CR AFLHM

Model CR AFLHM 25 CRAFLHM40




Barrel Dia : 120 mm to 220 mm

Harness Weight: Up to 250 kg



SAILENT FEATURES – CR AFLHM

STURDY ROBUST STRUCTURE

LARGE WHEELS

SMOOTH RUNNINGSTEERING FROM BOTH SIDES BY BAR

SUITABLE FOR LIFTING WARP BEAM ALONG

WITH HEALD FRAME TO LOAD ON THELOOM.



WORKING OPERATION – CR AFLHM

HYDRAULIC LIFTING OF BEAM VIA FOOTPUMP.

PRECISE LOWERING OF THE BEAM VIA VALVEIN COMFORTABLE HEIGHT.

HYDRAULIC LIFT OF THE HARNESS UNIT VIAFOOT PUMP.

EXACT POSITIONING OF HARNESS FRAMES ONTHE LOOM VIA USER FRIENDLY MECHANISM.

PRECISE INSERTION OF HARNESS FRAMES VIA ADDITIONAL PRECISION LOWING VALVE

FROM THE WARPERS AISLE.



CR ACF – BTransportation of Cloth Roll from

Batching Motion



Technical Specs- CR ACF-B

Max. Fabric Roll Weight: Up to 1500kg

Max. Fabric Roll Width: Up to 4000 mm

Max. Fabric Roll Dia.: Up to 1500mm



TC SLM

Transportation of Beams WithinPrep Dept.



Technical Specs- TC SLM

Specification TC SLM 25 TC SLM 40






WORKING OPERATION- TC SLM

LOW LIFTING CARRIER

HYDRAULIC LIFTING AND LOWERING BYHAND PUMP WITH FOOT LOWERING VALVE.

DELICATE HANDLING OF BEAMS DUE TO WIDER BASE HOLDING DESIGN

MOST CONVENIENT FOR TRANSPORTATION OFBEAMS WITHIN DEPARTMENTS

FORKS ARE SHAPED TO PERMIT DRASTICREDUCTION IN LOADING AND UNLOADINGTIME



Fabric Roll TrolleyCR 4/5/6/7

Unloading of Fabric Roll from Looms



Technical Specs- CR – 4 / 5 / 6 / 7

Specification CR 4 CR 5 CR 6 CR7

Roll Wt.: 160kg 350kg 450kg 550kg

Roll Dia.: 400mm 500mm 600mm 700mm

Roll Width: 2000 mm To 4000 mm



SALIENT FEATURES -CR-4/5/6/7

HYDRAULIC LIFTING AND LOWERING OF CRADELBY HAND PUMP WITH LOWERING VALVE

LARGE WHEEL BASE BETWEEN RUNNING WHEELSFOR BALANCED TANSPORT

COMPACT DESIGN

SPECIAL LIFTING SYSTEM FOR EFFICIENT OPERATIONEVEN IN NARROW AISLES



TRMCLOTH ROLL TROLLEY CARRIER



Technical Specs- TRM

Cloth Roll Lifting Capacity Up to 1500 kg

SALIENT FEATURES – TRM

The main characteristics of the TRM are its compactness,agility, versatility and robustness.

The operator is able to handle all the phases of loading,

unloading and transport by using a guiding rudder.

The attaching and lifting phases are simple and precise usinga steel ball hitch and a hydraulic lifting arm.



ES-03AUTOMATIC WINDER BATCHING

MOTION TROLLEY



Technical Specification - ES-03Max. Fabric Roll Dia. Upto 1500 mmMax. Fabric Roll Width Upto 4000 mm

SALIENT FEATURES – ES-03Electro welded structure with surface treatment of 3 steps: steam degreasing;spray application of anchorage paint; spray application of the polyurethane paint.

Driving roller coated with smooth rectified synthetic rubber (GSR/L)

Driving roller and guiding rollers with surface treatment of three steps: blasting;spray application of anchoring primer coating; acrylic spray painting.

Guiding rollers placed on auto-aligning bearings.

Fabric wound on back face, possibility to wind on right face interchanging thedriving roller.

Maximum diameter of the cloth roll: 1500 mm. Electric supply 415 V - 50 Hz.Voltage on the controls 24 V + NEUTRA L (TO BE CON FIRMED) Power of motor:

A.C. 0,25 HP.

ET SUP AHLT 10 M



ET-SUP- AHLT-10 MPILE BEAM TROLLEY



Technical Specs- ET-SUP-AHLT

Barrel Length: From 2000 mm to 4000 mm

Flange Dia.: From 800 mm to 1250 mm

Beam Weight: Up to 1000Kg

Max Lifting: Up to 2100 mm

h l



Technical FeaturesET-SUP-AHLT-M

Application : High lift trolley for pile beams in highposition (Terry Towel)

Lifting system : Electro – Hydraulic with A.C Motor

Transportation : Manual

Power Supply : 3 Phase, 415 Volt A.C. (+/- 5%) supply,for Hydraulic connected to the Trolley by inbuilt (5System meters long)extension cord.

Maximum Height of Upper beam center : 2100 mm



Salient Features – ET-SUP-AHLTSTURDY ROBUST STRUCTURE

POLYURETHANE WHEEL

SMOOTH RUNNING AND EASY TO HANDLE BY GOODFUNCTIONING AND EASY ENTERING CROSSWISE.

SUITABLE FOR LIFTING WARP BEAM FOR HIGH LIFT.

HYDRAULIC LIFTING OF BEAM BY HYDRAULICPOWER PACK.

PRECISE LOWERING OF THE BEAM BY VALVE INCOMFORTABLE HEIGHT.



CMR

CLOTH ROLL STOCKER



Technical Specs- CMR

Fabric Roll Width From 1200 MM T0 4000 MM

Max. Fabric Roll Dia. Up to 400 MM

Max. Fabric Roll Weight Up to 250 KG

Fabric Roll Carrying Capacity 6 Nos. To 8 Nos.

An electric system allows the rotation of the position of rollsto facilitate the loading and unloading of cloth rolls.

STK DN



STK-DNParking Trolley

To Store Beams in Weave Room



Technical Specs- STK-DN


Beam Flange Dia.: From 800 mm to 1000 mm

Weight Carrying Capacity: From 800 kg to 2000 kg



BEAM STOCKER - MRP

COMPUTERIZED

VERTICAL

BEAM STORAGE SYSTEM



BEAM STOCKER



Technical Specs- MRP


Beam Flange Dia.: From 500 mm to 1250 mm

Beam Weight: From 150 kg to 2000 kg each

Balanced Sturdy Design

Sailent Features - MRP



Sailent Features MRPDrive

A/C motor driven and controlled by inverter drive andheavyduty speed reduction gear box. The speed can be adjustedvery precisely as required.

PLC Controls

All control through world renown by PLC/HMI.

Shortest distance On demand, the beam in the Stocker willfollow the shortest way through an Encoder and speciallydesign software.

With the help of a reversing switch on panel, the systemcanbe forwarded or reversed as and when required.

PLC can be connected with office Computer to review OR toget Print-Out for the storage beam record.



Programmable Beam position All positions can be programmed with the beam data individuallywhile loading the beam. The same can be recalled either bybeam data OR by serial number and can be unloaded. Afterunloading the beam, the same serial number can be RESET fornew beam data.

Exact Position Stoppage We have designed our software to determine the current positionof demanded beam. Stocker will select its shortest path and willmove forward / backward at full run speed. System automaticallyreduces the speed as programmed before reaching the desiredposition and finally stops at exact position for taking out therequired beam .

Emergency push button are provided for safety purpose.

Few of OUR



Few of OURESTEEMED CUSTOMERS

1. SEL MANUFACTURING CO. LUDHIANA

2. VALLABH TEXTILES LUDHIANA

3. ALOK INDUSTRIES LTD SILVASSA

4. JINDAL MEDICOT LUDHIANA

5. ABHITEX INTERNATIONAL PANIPAT

6. DITPL DODBALPUR

7. RIBA TEXTILE



8. ABHITEX INTER PANIPAT

9. ORACLE EXPORTS VAPI

10. BHASKAR WEAVING BHOPAL

11. B S L BHILWARA

12. CREATIVE PORTICO ITARAPUR

13. NAHAR TEXTILE MUMBAI

14. RSL DYECOT LTD AHMEDABAD



15. N S L TEXTILE A.PRADESH

16. PREMIER POLYWEAVE COIMBATORE

17. SARA TEXTILE NOIDA

18. SHRI DHANLAXMI GUNTUR

19. TESSITURE MONTE KOLHAPUR

20. RAYMOND LTD THANE

21. LOYAL TEXTILE CHENNAI



22. KOTEX IND SURAT

23. LUCKY EXPORTS DELHI

24. MANDHANA WEAVING THANE

25. S R F LTD TAMILNADU

26. SHRI SHANMUGAVE MILL DINDIGUL

27. SHARMAN TEX MILL LUDHIANA

28. SARA TEXTILE NOIDA



29. THE RUBY MILLS DHAMANI

30. G.M FABRICS MUMBAI

31. JAI CORP NOIDA

32. DESSAN TEX SHIRPUR

33. RACHANA FAB AHMEDABAD



FERBER PROMISE…

TIME & LABOUR SAVING

EASE OF OPERATION

SAFE HANDLING OF BEAMS

REDUCED MAINTENANCE COST

INCREASED PRODUCTIVITY

manual trolleys

Documents