manual transmissions
DESCRIPTION
MANUAL TRANSMISSIONS. Chapter 4 Classroom Manual Page 67 Lab Manual Page 105. CBC AUTOMOTIVE RK. OBJECTIVES. Discuss the operation of typical manual transmissions. Describe the purpose and operation of a synchronizer. Discuss power flow through a manual transmission. - PowerPoint PPT PresentationTRANSCRIPT
MANUAL TRANSMISSIONS
Chapter 4 Classroom Manual
– Page 67 Lab Manual
– Page 105
CBCAUTOMOTIVE
RK
OBJECTIVES
Discuss the operation of typical manual transmissions.
Describe the purpose and operation of a synchronizer.
Discuss power flow through a manual transmission. Compare and contrast transmissions and transaxles.
CBCAUTOMOTIVE
RK
OBJECTIVES
Discuss power flow through a transaxle. Describe how gears are shifted. Identify accessories controlled by a manual trans. Discuss Gear oil.
CBCAUTOMOTIVE
RK
MANUAL TRANS
Purpose to keep engine in normal operating RPM range.
Manual transmissions and transaxles are fundamentally the same.
Can change gear ratios and reverse direction.
Transaxle includes differential in same housing. CBC
AUTOMOTIVERK
SLIDING GEAR TRANS
Sliding spur gears. Gears go in & out of mesh.
– If gear speeds are different grinding will occur.– Typically used for reverse in both transmissions
and transaxles.
Page 69
COLLAR SHIFT TRANS
A collar shift trans has parallel shafts fitted with gears in constant mesh.– If gear speeds are different grinding will occur.– Used for Low gear on some older model
transmissions.
CBCAUTOMOTIVE
RKPage 69
SYNCHROMESH TRANS
A synchromesh transmission is a constant mesh, collar shift transmission equipped with synchronizers, which equalize the speed of the shafts and gears before they are engaged.
CBCAUTOMOTIVE
RKPage 69
SYNCHRONIZERS
Purpose to equalize shaft and gear speeds. Four types
– Hub– Sleeve– Blocking Ring– Inserts or spring & ball devices
Page 70CBC
AUTOMOTIVERK
SYNCHRO OPERATION
Page 71CBC
AUTOMOTIVERK
SYNCHRO OPERATION
Page 72CBC
AUTOMOTIVERK
SYNCHRO OPERATION
Page 72CBC
AUTOMOTIVERK
TRANSMISSION DESIGNS
Three-Speed Transmission Three-Speed Transmission /w add-on OD Four-Speed Transmission Four-Speed Transmission /w Internal OD Five-Speed Transmission /w Internal OD Six-Speed Transmission /w 2 Internal OD’s
CBCAUTOMOTIVE
RKPage 73 - 74
AFTERMARKET OD
Available for popular standard and automatic transmissions.
Expensive $1,000 to $2,000– Must shorten drive shaft.– Some are two speed.
» Direct and OD» Direct and UnderDrive
CBCAUTOMOTIVE
RKPage 75
BASIC OPERATION
Page 77
CBCAUTOMOTIVE
RK
DETENT & INTERLOCK
Detent - a ball & spring used to hold a shift rail in position.
Interlock - a oval shaped device used between shift rails so only one gear at a time can be selected.
Rollpin or setscrew - used to attach a shift fork to a shift rail.
CBCAUTOMOTIVE
RKPage 79
CBCAUTOMOTIVE
RK
DETENT & INTERLOCK
Page 79
SHIFT RAIL TYPICAL
CBCAUTOMOTIVE
RK
Page 79