manual of babyliss pro perfect curl.doc new
TRANSCRIPT
![Page 1: Manual of babyliss pro perfect curl.doc new](https://reader035.vdocuments.site/reader035/viewer/2022071702/55a6fcea1a28abd30d8b47c7/html5/thumbnails/1.jpg)
Manual of Babyliss Pro nano titanium miracurl
professional stylist tools.
This manual can help you to work with Babyliss Pro nano titanium miracurl
efficiently as professional. This Babyliss Pro nano titanium made from high quality
materials which make perfect curls hair.
- Do not have to spin you hands around because this machine will do it for you.
- You will always get perfect curl because every time you use this your curl stays long
lasting, beautiful and smooth.
- Babyliss Pro nano titanium miracurl can work with every hair types except fake hair.
Operating Feature
![Page 2: Manual of babyliss pro perfect curl.doc new](https://reader035.vdocuments.site/reader035/viewer/2022071702/55a6fcea1a28abd30d8b47c7/html5/thumbnails/2.jpg)
Time settings
- There are 3 timer settings with audio beep indicator. These settings will give
different curl effects.
Setting 8 (8 seconds = 3 beeps) for loose waves
Setting 10 (10 seconds = 4 beeps) for soft curls
Setting 12 (12 seconds = 5 beeps) for more defined curls
Temperature settings
(I) : 190°C for delicate, fine or colored hair
(II) : 210°C for normal textured hair
(III) : 230°C for thick hair
Instructions for use
- Plug the machine into a mains socket.
- Select heat settings by slide the temperature switch to these label O-I-II-III
for long lasting result.
- The indicator light will stop flashing when the machine is ready for use.
*The automatic-beep indicator can be turned off if not required by sliding the
timer switch to ‘O’.
- Curl direction sitting (Right/Left/Auto) is using to choose slide curl direction
by sliding the switch to either left ‘L’, right ‘R’ or Auto ‘A’
* For a more natural look then select the auto setting ‘A’.
- Make sure that hair is clean and dry.
![Page 3: Manual of babyliss pro perfect curl.doc new](https://reader035.vdocuments.site/reader035/viewer/2022071702/55a6fcea1a28abd30d8b47c7/html5/thumbnails/3.jpg)
- Separate a section of hair that is no bigger than 3cm when working with
this machine.
- Place the machine in the right position into the hair with the open past of
the curl chamber facing towards the head.
- Place the machine in the position where you want the curl to start and
place to hair through the centre of the machine.
![Page 4: Manual of babyliss pro perfect curl.doc new](https://reader035.vdocuments.site/reader035/viewer/2022071702/55a6fcea1a28abd30d8b47c7/html5/thumbnails/4.jpg)
- When the hair is in place, let go of the hair section and close the handle
to allow the hair to be taken automatically into the curl machine.
- If using the timer setting, the automatic beep indicator will start as soon as
the handles are closed together. Hold the curl machine still with the handles closed
together until the end of the individual beeps.
- When time is up, you can remove the machine from your hair.
- If you need the curl set perfectly, do not comb your hair until it cool.
Warning
• Do not use this machine near water.
• Do not place on heat surface.
• Do not leave the machine switch on or plug in.
• Keep out of reach of children all the time.
![Page 5: Manual of babyliss pro perfect curl.doc new](https://reader035.vdocuments.site/reader035/viewer/2022071702/55a6fcea1a28abd30d8b47c7/html5/thumbnails/5.jpg)
![Page 6: Manual of babyliss pro perfect curl.doc new](https://reader035.vdocuments.site/reader035/viewer/2022071702/55a6fcea1a28abd30d8b47c7/html5/thumbnails/6.jpg)